Hello,
For a personal project a write a simple tools to unpack/repack boot.img, recovery.img and logo.bin of Mediatek cpu based devices named MTKIMG. MTK add specific header on each blocs in image so common tools could not unpack/repack properly. Also every tools i found do not correspond to my need.
Here is the the MTKIMG characteristics :
Write in C, open-source.
Portable : Linux, Cygwin, Windows (MAC is currently under port).
Only one executable for unpack/repack.
Support unpack/repack boot.img and recovery.img.
Support unpack/repack logo.bin
Keep the original image size at repack time.
Handle kernel and ramdisk with or without MTK header.
Automatic ramdisk decompression.
Option to keep or remove MTK headers.
Check for valid "ARM Linux zImage" kernel.
Check for valid "GZIP" ramdisk.
Check for overflow if kernel or ramdisk is too big at repack time.
Option to set compression rate for ramdisk.
Easy to use, all parameters are defaulted.
Easy to build on every platform.
Got simple test-suite.
Documentation available.
Version :
Status : Bêta
Version : 0.44
Update : 2015/07/20
Source code :
https://github.com/rom1nux/mtkimg
Releases (Linux, Cygwin, Windows) :
https://github.com/rom1nux/mtkimg/tree/master/releases
OSX version are currently under port (Please, thanks sambwel)
Hope this help (Sorry for my bad english)
Hi
Did you used anything from @carliv or @bgcngm projects ( source / binarys ) ?
Or is this a full new project?
Since you didn't added any source link,,, (github / bitbucket ?)
cheers
Hello superdragonpt,
Did you used anything from @carliv or @bgcngm projects ( source / binarys ) ?
Click to expand...
Click to collapse
MTKIMG is write in C from scratch. I do not use anything other than "find", "gzip" and "cpio" utilities.
I know bgcngm's pearl scripts (mtk-tools) but it does not fit my needs.
I dont know carliv's bash scripts , i dont know if it support MTK header bloc.
Or is this a full new project?
Click to expand...
Click to collapse
Yes it's a full new project, It's write MTKIMG for my need first, but i told myself that it could help other.
Since you didn't added any source link,,, (github / bitbucket ?)
Click to expand...
Click to collapse
If MTKIMG got interests i probably create git repo.
Thanks for your remarks
rom1nux said:
Hello superdragonpt,
MTKIMG is write in C from scratch. I do not use anything other than "find", "gzip" and "cpio" utilities.
I know bgcngm's pearl scripts (mtk-tools) but it does not fit my needs.
I dont know carliv's bash scripts , i dont know if it support MTK header bloc.
Yes it's a full new project, It's write MTKIMG for my need first, but i told myself that it could help other.
If MTKIMG got interests i probably create git repo.
Thanks for your remarks
Click to expand...
Click to collapse
Thanks for answering
I have some MTK devices here, i'll test this tool Compatibility across the Mtk SoC's i own.
Keep it up
Cheers
I have some MTK devices here, i'll test this tool Compatibility across the Mtk SoC's i own.
Click to expand...
Click to collapse
Good news !
For information i put source code under GPL3 license and i create a dedicated GiHub repository as you suggest : https://github.com/rom1nux/mtkimg
Feel free to come to help
Good Work Mate ....looking forward to it
edit : any 32 bit system tool ??
Hello [email protected],
Thank for your interest.
edit : any 32 bit system tool ??
Click to expand...
Click to collapse
I got only 64bits OS but i can install Cygwin32 and VirtualBox 32 bits OS if needed but it's very easy to build.
Hello,
I test MTKIMG and it work well, but now i search information about MTK logo partition format, i see the MTK header on it but dont know how to parse images.
More preciselly i want to know information about header of the logo partition (like size of image, etc...) the header after the MTK header.
Did you have this kind of information ?
Thank in advance
Hello,
I find some information about logo.bin image :
- The first 512 bytes are the MTK header Magic (0x88168858) + Size + "LOGO"
- After, i found logo partition header is formated like :
Code:
Offset (B) | Size (B) | Description
--------------------------------------------------------
0 | 4 | Logos count
4 | 4 | Size of bloc (=MTK header image size)
8 | 4 | Logo_0 offset
12 | 4 | Logo_1 offset
8+(n*4) | 4 | Logo_n offset
... | ... | ?
--------------------------------------------------------
Logo_0 offset | Logo_1-Logo_0 offset | Logo_0 gzip content
Logo_1 offset | Logo_2-Logo_3 offset | Logo_1 gzip content
... | ... | Logo_n gzip content
--------------------------------------------------------
I dont know how to find the size of each logo, did you have this information ?
This looks great. I would love to be able to run this on my Mac. I don't think it should be hard to get it working but I'm not familiar with C so I don't know what to change to make it build. Let me know what I can do to help!
Hello sambwel,
I would love to be able to run this on my Mac. I don't think it should be hard to get it working but I'm not familiar with C so I don't know what to change to make it build. Let me know what I can do to help!
Click to expand...
Click to collapse
Happy to read this
You only need "gcc" and "make" for instance (i found this on the web) :
Installing recent XCode versions confusingly enough does not automatically install the command line tools. To install the command line tools when they're not automatically installed;
Start XCode.
Go to XCode/Preferences.
Click the "Downloads" tab.
Click "Components".
Click "Install" on the command line tools line.
That will install the command line tools and make them accessible from a regular command line.
Click to expand...
Click to collapse
Be sure gcc and make are in your PATH environment variable, and after, open a terminal on your MAC in the source folder and hit command :
Code:
make
If you get "Unsupported platform" message it's a good news, i'm going to do minor correction to the source code for this error after lunch. (Put your building log here if you want)
Thanks for your help
No worries mate, familiar with linux and building things from source, just not familiar with C code Here's the output when I try make:
Code:
sambwel:mtkimg sambwel$ make
MTKIMG LINUX MAKE by rom1nux
Create directory build ...
Building C file build/info.o ...
gcc -c -Wall src/info.c -o build/info.o
In file included from src/info.h:34,
from src/info.c:24:
src/main.h:51:3: warning: #warning "Unsupported platform !"
Building C file build/main.o ...
gcc -c -Wall src/main.c -o build/main.o
In file included from src/main.c:24:
src/main.h:51:3: warning: #warning "Unsupported platform !"
src/main.c: In function ‘main’:
src/main.c:54: error: ‘APP_PLATFORM’ undeclared (first use in this function)
src/main.c:54: error: (Each undeclared identifier is reported only once
src/main.c:54: error: for each function it appears in.)
make: *** [build/main.o] Error 1
Hello sambwel
sambwel said:
No worries mate, familiar with linux and building things from source
Click to expand...
Click to collapse
Cool, good new, I know nothing about MAC
sambwel said:
..., just not familiar with C code Here's the output when I try make:
Click to expand...
Click to collapse
OK, i'm going to add MAC platform specifics to main.h this afternoon (I have not been able to do yesterday, sorry).
I tell you when i the modification is done.
Thanks a lot for your help
superdragonpt said:
Thanks for answering
I have some MTK devices here, i'll test this tool Compatibility across the Mtk SoC's i own.
Keep it up
Cheers
Click to expand...
Click to collapse
I made a similar simple script in dash format that should work on device:
Code:
#!/sbin/sh
bootonetofive() {
busybox dd if=${1}.img of=1 bs=512 count=4 conv=notrunc
busybox dd if=${1}.img of=${1}-header bs=512 skip=4 conv=notrunc
busybox dd if=${1}-header of=2 bs=512 count=1 conv=notrunc
busybox dd if=${1}-header of=${1}-header-k_header bs=512 skip=1 conv=notrunc
initrd=`hexdump -C ${1}-header-k_header | grep -m1 "ROOTFS" | cut -d " " -f 1`
if [ -z ${initrd} ]; then
initrd=`hexdump -C ${1}-header-k_header | grep -m1 "RECOVERY" | cut -d " " -f 1`
FLSH=recovery
fi
initrdbin=`printf "%d\n" 0x${initrd}`
intrdsec=`expr ${initrdbin} / 512`
busybox dd if=${1}-header-k_header of=3 bs=512 count="${intrdsec}" conv=notrunc
busybox dd if=${1}-header-k_header of=${1}-header-k_header-kernel bs=512 skip="${intrdsec}" conv=notrunc
busybox dd if=${1}-header-k_header-kernel of=4 bs=512 count=1 conv=notrunc
busybox dd if=${1}-header-k_header-kernel of=5 bs=512 skip=1 conv=notrunc
}
AddPadd() {
if [ ${krnsz} != ${nwkrnsz} ]; then
krnsz=`du -B 1 3 | cut -f 1`
nwkrnsz=`du -B 1 3-new | cut -f 1`
if [ ${krnsz} -gt ${nwkrnsz} ]; then
pddng=`expr ${krnsz} - ${nwkrnsz}`
busybox dd if=/dev/zero of=padd bs=1 count=${pddng} conv=notrunc
cat padd >> 3-new
else
nwsz=`expr ${nwkrnsz} / 512 + 1`
busybox dd if=/dev/zero of=3 bs=512 count="${nwsz}" conv=notrunc
fi
AddPadd
else
echo "kernels are already the same size"
exit 0
fi
if [ ${pddng:-0} != "0" ]; then
if [ ${nwsz:-0} != "0" ]; then
echo "new kernel is larger"
else
echo "kernels are now the same size"
fi
exit 0
fi
}
addserialno() {
printf "androidboot.serialno=" > serno
dd if=/dev/block/mmcblk0p1 of=barcode bs=16 count=1
cat serno barcode > serialno
dd if=1 of=1_1 bs=16 count=7
dd if=1 of=1_2 bs=16 skip=7
dd if=1_2 of=1_3 bs=1 skip=37
cat 1_1 serialno 1_3 > 1_new
}
unpackramd() {
mkdir work 2> /dev/null
cd work
busybox gzip -dc ../5 2> /dev/null | cpio -i 2> /dev/null
cd ${crdr}
}
repackramd() {
cd work
find . | cpio -o -H newc 2> /dev/null | gzip -9 > ../5-new 2> /dev/null
rm -rf *
cd ${crdr}
}
bootfivetoone() {
cat 1 2 3 4 5 > new-${1:-boot}.img
}
crdr=`pwd`
bootonetofive ${1:-boot}
rm ${1:-boot}-*
if [ -f 3-new ]; then
AddPadd
cp 3-new 3
fi
if [ ${2:-NA} = "split" ]; then
unpackramd
echo "modify what you need to in ${crdr}/work then"
echo "press enter y to continue or any key to exit"
read cntn
if [ ${cntn:-n} = "y" ]; then
repackramd
cp 5-new 5
else
exit 0
fi
fi
if [ ${2-NA} = "serial" ]; then
addserialno
cp 1_new 1
fi
bootfivetoone ${1:-boot}
echo "All Done new .img created... ${crdr}/new-${1:-boot}.img"
# 1 header
# 2 k_header
# 3 kernel
# 4 r-header
# 5 ramdisk
FLSHPRT=`ls -la /dev/block/platform/mtk-msdc.0/by-name | grep ${FLSH:-boot} | awk -F " " '{print $NF}'`
if [ ${2:-no} = "flash" ]; then
dd if=${crdr}/new-${1:-boot}.img of=/dev/block/${FLSHPRT}
fi
Attached as a txt.
It just needs busybox installed. Only used it with the new MT6732/52 SoCs. I could use someone testing it with others to see if it's universal. (Only setup for gzipped ramdisks, should be able to add in the others.)
To run it is for example.
sh ./splitboot.sh boot split to split boot.img (and open ramdisk)
sh ./splitboot.sh boot flash to flash boot.img
sh ./splitboot.sh boot serial to take the barcode value from proinfo partition and uses it as serial number (only seems to work with AOSP)
It works with *.img and automatically identifies if it's a boot or recovery img.
HypoTurtle said:
I made a similar simple script in dash format that should work on device:
Code:
#!/sbin/sh
bootonetofive() {
busybox dd if=${1}.img of=1 bs=512 count=4 conv=notrunc
busybox dd if=${1}.img of=${1}-header bs=512 skip=4 conv=notrunc
busybox dd if=${1}-header of=2 bs=512 count=1 conv=notrunc
busybox dd if=${1}-header of=${1}-header-k_header bs=512 skip=1 conv=notrunc
initrd=`hexdump -C ${1}-header-k_header | grep -m1 "ROOTFS" | cut -d " " -f 1`
if [ -z ${initrd} ]; then
initrd=`hexdump -C ${1}-header-k_header | grep -m1 "RECOVERY" | cut -d " " -f 1`
FLSH=recovery
fi
initrdbin=`printf "%d\n" 0x${initrd}`
intrdsec=`expr ${initrdbin} / 512`
busybox dd if=${1}-header-k_header of=3 bs=512 count="${intrdsec}" conv=notrunc
busybox dd if=${1}-header-k_header of=${1}-header-k_header-kernel bs=512 skip="${intrdsec}" conv=notrunc
busybox dd if=${1}-header-k_header-kernel of=4 bs=512 count=1 conv=notrunc
busybox dd if=${1}-header-k_header-kernel of=5 bs=512 skip=1 conv=notrunc
}
AddPadd() {
if [ ${krnsz} != ${nwkrnsz} ]; then
krnsz=`du -B 1 3 | cut -f 1`
nwkrnsz=`du -B 1 3-new | cut -f 1`
if [ ${krnsz} -gt ${nwkrnsz} ]; then
pddng=`expr ${krnsz} - ${nwkrnsz}`
busybox dd if=/dev/zero of=padd bs=1 count=${pddng} conv=notrunc
cat padd >> 3-new
else
nwsz=`expr ${nwkrnsz} / 512 + 1`
busybox dd if=/dev/zero of=3 bs=512 count="${nwsz}" conv=notrunc
fi
AddPadd
else
echo "kernels are already the same size"
exit 0
fi
if [ ${pddng:-0} != "0" ]; then
if [ ${nwsz:-0} != "0" ]; then
echo "new kernel is larger"
else
echo "kernels are now the same size"
fi
exit 0
fi
}
addserialno() {
printf "androidboot.serialno=" > serno
dd if=/dev/block/mmcblk0p1 of=barcode bs=16 count=1
cat serno barcode > serialno
dd if=1 of=1_1 bs=16 count=7
dd if=1 of=1_2 bs=16 skip=7
dd if=1_2 of=1_3 bs=1 skip=37
cat 1_1 serialno 1_3 > 1_new
}
unpackramd() {
mkdir work 2> /dev/null
cd work
busybox gzip -dc ../5 2> /dev/null | cpio -i 2> /dev/null
cd ${crdr}
}
repackramd() {
cd work
find . | cpio -o -H newc 2> /dev/null | gzip -9 > ../5-new 2> /dev/null
rm -rf *
cd ${crdr}
}
bootfivetoone() {
cat 1 2 3 4 5 > new-${1:-boot}.img
}
crdr=`pwd`
bootonetofive ${1:-boot}
rm ${1:-boot}-*
if [ -f 3-new ]; then
AddPadd
cp 3-new 3
fi
if [ ${2:-NA} = "split" ]; then
unpackramd
echo "modify what you need to in ${crdr}/work then"
echo "press enter y to continue or any key to exit"
read cntn
if [ ${cntn:-n} = "y" ]; then
repackramd
cp 5-new 5
else
exit 0
fi
fi
if [ ${2-NA} = "serial" ]; then
addserialno
cp 1_new 1
fi
bootfivetoone ${1:-boot}
echo "All Done new .img created... ${crdr}/new-${1:-boot}.img"
# 1 header
# 2 k_header
# 3 kernel
# 4 r-header
# 5 ramdisk
FLSHPRT=`ls -la /dev/block/platform/mtk-msdc.0/by-name | grep ${FLSH:-boot} | awk -F " " '{print $NF}'`
if [ ${2:-no} = "flash" ]; then
dd if=${crdr}/new-${1:-boot}.img of=/dev/block/${FLSHPRT}
fi
Attached as a txt.
It just needs busybox installed. Only used it with the new MT6732/52 SoCs. I could use someone testing it with others to see if it's universal.
To run it is for example.
sh ./splitboot.sh boot split to split boot.img (and open ramdisk)
sh ./splitboot.sh boot flash to flash boot.img
sh ./splitboot.sh boot serial to take the barcode value from proinfo partition and uses it as serial number (only seems to work with AOSP)
It works with *.img and automatically identifies if it's a boot or recovery img.
Click to expand...
Click to collapse
Good
But for those SoC, we use the inbuilt tool.
(not for general public)
So yours and this one, is always good alternative
cheers
Hello
So yours and this one, is always good alternative
Click to expand...
Click to collapse
Yes good alternative, i take look when i can, but HypoTurtle you should probably create a dedicated thread for your tools.
sambwel,
Normally we just have to adjust "main.h" and "Makefile" for porting to OSX platform.
(I put notes in the files headers)
main.h
I add 'define' test to detect OSX platform (APP_PLATFORM/APP_OSX). I don't know if this work. I leave the APP_ARCH (32/64bits) test as-it but i don't know if this work on OSX (it's not very important for now, we can correct after)
Makefile
I add "Darwin" detection mechanism for OSX.
I start to add options to unpack/repack logo.bin, this use "zlib" and "libpng1.6", you can disable this to don't be bother with externals dependencies. In Makefile, put LOGO_SUPPORT=0 in the LINUX/CYGWIN/OSX section (Line ~92) for first build.
Big Thanks for your help
Okay, good news! mtkimg builds and runs now! I did have to put LOGO_SUPPORT=0 in the Makefile otherwise I get the error "error: png.h: No such file or directory".
So I did a quick test to see if it works. info and unpack seem to work correctly (tested on ~7mb stock boot.img). However when I repack the same image the result is a ~4.3gb boot.img!! Not sure what happened... headers are intact on the new image. No more time to test right now but I will check back here soon.
Hip Ha ! Good news !
For the size, look at the "image.cfg" if the size is right
You can use '-v' and '-d' options to see what append and look at the "layout" part display on the screen.
(Suspect image.cfg not being read correctly, i'm goind to look about "End of line" on MAC.
Many thanks for your try
Hello,
I push the MTKIMG Bêta 0.38 with compiled version for (Linux64,Cygwin64 and Windows64) that support logo unpacking. (logo repack in progres...)
Have fun.....
Do I have to wait two years for the system to be read and write?
Android must got rooted in order to mount it as RW.
jwoegerbauer said:
Android must got rooted in order to mount it as RW.
Click to expand...
Click to collapse
But I did the root and the impossible, to no avail
Ayoub$# said:
But I did the root and the impossible, to no avail
Click to expand...
Click to collapse
What does this ADB command sequence return?
Code:
adb devices
adb shell '[ ! -z "$(/system/bin/ps -A | grep -v grep | grep -c daemonsu)" ] && echo "is rooted" || echo "is not rooted"'
jwoegerbauer said:
What does this ADB command sequence return?
Code:
adb devices
adb shell '[ ! -z "$(/system/bin/ps -A | grep -v grep | grep -c daemonsu)" ] && echo "is rooted" || echo "is not rooted"'
Click to expand...
Click to collapse
Please can you show me the detailed method via ADB
Hi Team,
i am trying to find out all about the LG WebOS undocumented API
here is what i have found so far
please feel free to share with me if you have any additions
#get broadcastID
Code:
ls-monitor | grep -a -m 4 -h "broadcastId" | grep -oE "\b[0-9, a-z]{8}\-[0-9, a-z]{4}-[0-9, a-z]{4}-[0-9, a-z]{4}-[0-9, a-z]{12}\b" | tail -1
#get current channelID
Code:
luna-send -n 1 -f luna://com.webos.service.utp.broadcast/getCurrentChannel '{"broadcastId": "'$broadcastid'", "subscribe": false}'| grep -a -h "channelId" | grep -oE "\b[0-9, a-z]{1}_[0-9, a-z]{3}_[0-9, a-z]{1}_[0-9, a-z]{1}_[0-9, a-z]{2}_[0-9, a-z]{3}_[0-9, a-z]{3}\b"
#show recording dialog
Code:
luna-send -n 1 -f luna://com.webos.applicationManager/launch '{"id": "com.webos.app.dvrpopup", "noSplash": true, "params": {"activateType": "instantRecord", "broadcastId": "'$broadcastid'", "channelId": "'$channelid'", "inputType": "TV", "isDelayed": false, "isDvb": true}}'
#start recording and show recordingID
Code:
luna-send -n 1 -f luna://com.webos.service.utp.dvr/record/startProgramRecord '{ "camPinCode": "", "channelId": "'$channelid'", "duration": 2880, "endTime": { "day": 12, "hour": 20, "minute": 0, "month": 6, "second": 28, "year": 2021 }, "programId": "2048_59_10_46306", "quality": "record_quality_high", "recordingMode": "recording_direct", "storagePath": "/tmp/usb/sdb/sdb1/LG Smart TV" } '| grep recordingId | awk '{print substr ($2, 2, length ($2) -3) }'
#stop recording by recordingID
Code:
luna-send -n 1 -f luna://com.webos.service.utp.dvr/record/stopRecord '{"needSave": true, "recordingId": "'$recordingid'" } '
#close application by ID
Code:
luna-send -n 1 -f luna://com.webos.applicationManager/closeByAppId ' {"id":"netflix"} '
#Mute
Code:
luna-send -n 1 -f luna://com.webos.service.audiooutput/audio/volume/muteSoundOut ' {"mute":true, "soundOutput":"tv_external_speaker"} '
#UnMute
Code:
luna-send -n 1 -f luna://com.webos.service.audiooutput/audio/volume/muteSoundOut ' {"mute":false, "soundOutput":"tv_external_speaker"} '
#changechannel you must get the current broadcastID and the new channelID, old is irrelevent
Code:
luna-send -n 1 -f luna://com.webos.service.utp.broadcast/changeChannel ' {"channelId":"7_124_2_0_47_4712_2048", "broadcastId":"00000011-1dd3-acb4-84f7-41b645a4a528", "currentChannelId":"7_208_3_0_59_10_2048"} '
#to take a screenshot
Code:
luna-send -n 1 -f luna://com.webos.surfacemanager/captureCompositorOutput '{"output":"/tmp/usb/sda/sda1/NAS/shares/screenshot-temp.jpg", "format":"JPG"}'
#get current foregound application
Code:
luna-send -n 1 luna://com.webos.applicationManager/getForegroundAppInfo '{}'
#set master volume to 30
Code:
luna-send -f -n 1 luna://com.webos.service.audio/master/setVolume '{"volume":30}'
below is a link to my Github where I have a list of bash scripts that can be used for varies applications on LG based on the above function
Volume.sh
automatic control the volume based on the running application
Click to expand...
Click to collapse
recording.sh
start recording of the current channel and stop after 20 Seconds
Click to expand...
Click to collapse
my Github reposatory
https://github.com/diaahussein/WebOS_LG_TV_Scripts
hey there
can you show me how to connect to the tv and automatically renew the development-timer? this way I could setup a crontask on my RPI and don't need to root/modify my TV.
diaahussein said:
Hi Team,
i am trying to find out all about the LG WebOS undocumented API
here is what i have found so far
please feel free to share with me if you have any additions
#get broadcastID
Code:
ls-monitor | grep -a -m 4 -h "broadcastId" | grep -oE "\b[0-9, a-z]{8}\-[0-9, a-z]{4}-[0-9, a-z]{4}-[0-9, a-z]{4}-[0-9, a-z]{12}\b" | tail -1
#get current channelID
Code:
luna-send -n 1 -f luna://com.webos.service.utp.broadcast/getCurrentChannel '{"broadcastId": "'$broadcastid'", "subscribe": false}'| grep -a -h "channelId" | grep -oE "\b[0-9, a-z]{1}_[0-9, a-z]{3}_[0-9, a-z]{1}_[0-9, a-z]{1}_[0-9, a-z]{2}_[0-9, a-z]{3}_[0-9, a-z]{3}\b"
#show recording dialog
Code:
luna-send -n 1 -f luna://com.webos.applicationManager/launch '{"id": "com.webos.app.dvrpopup", "noSplash": true, "params": {"activateType": "instantRecord", "broadcastId": "'$broadcastid'", "channelId": "'$channelid'", "inputType": "TV", "isDelayed": false, "isDvb": true}}'
#start recording and show recordingID
Code:
luna-send -n 1 -f luna://com.webos.service.utp.dvr/record/startProgramRecord '{ "camPinCode": "", "channelId": "'$channelid'", "duration": 2880, "endTime": { "day": 12, "hour": 20, "minute": 0, "month": 6, "second": 28, "year": 2021 }, "programId": "2048_59_10_46306", "quality": "record_quality_high", "recordingMode": "recording_direct", "storagePath": "/tmp/usb/sdb/sdb1/LG Smart TV" } '| grep recordingId | awk '{print substr ($2, 2, length ($2) -3) }'
#stop recording by recordingID
Code:
luna-send -n 1 -f luna://com.webos.service.utp.dvr/record/stopRecord '{"needSave": true, "recordingId": "'$recordingid'" } '
#close application by ID
Code:
luna-send -n 1 -f luna://com.webos.applicationManager/closeByAppId ' {"id":"netflix"} '
#Mute
Code:
luna-send -n 1 -f luna://com.webos.service.audiooutput/audio/volume/muteSoundOut ' {"mute":true, "soundOutput":"tv_external_speaker"} '
#UnMute
Code:
luna-send -n 1 -f luna://com.webos.service.audiooutput/audio/volume/muteSoundOut ' {"mute":false, "soundOutput":"tv_external_speaker"} '
#changechannel you must get the current broadcastID and the new channelID, old is irrelevent
Code:
luna-send -n 1 -f luna://com.webos.service.utp.broadcast/changeChannel ' {"channelId":"7_124_2_0_47_4712_2048", "broadcastId":"00000011-1dd3-acb4-84f7-41b645a4a528", "currentChannelId":"7_208_3_0_59_10_2048"} '
#to take a screenshot
Code:
luna-send -n 1 -f luna://com.webos.surfacemanager/captureCompositorOutput '{"output":"/tmp/usb/sda/sda1/NAS/shares/screenshot-temp.jpg", "format":"JPG"}'
#get current foregound application
Code:
luna-send -n 1 luna://com.webos.applicationManager/getForegroundAppInfo '{}'
#set master volume to 30
Code:
luna-send -f -n 1 luna://com.webos.service.audio/master/setVolume '{"volume":30}'
below is a link to my Github where I have a list of bash scripts that can be used for varies applications on LG based on the above function
Volume.sh
recording.sh
my Github reposatory
https://github.com/diaahussein/WebOS_LG_TV_Scripts
Click to expand...
Click to collapse
Might this be of any help to you?
I have created an Homey WebOS plus app using the undocumented API and I have already gathered some endpoints. And very nice to see you found a few I haven't seen before. How did you find those?
homey-webos-plus/drivers/webos_plus/webos/utils/constants.js at master · MaxvandeLaar/homey-webos-plus
Improved LG WebOS integration for Homey. Contribute to MaxvandeLaar/homey-webos-plus development by creating an account on GitHub.
github.com
Basically what I want to do is convert this into batch script for windows and by using Linux Binaries from Sourceforge create a script that basically does the same thing except it doesnt have to be pushed into my Phone's system it works directly in windows using ADB commands!
The script in question looks like this
Spoiler: THIS Script
Bash:
#adb shell mkdir /data/media/0/PartitionImages
#adb push .\backupPartitions.sh /data/media/0/PartitionImages/backupPartitions.sh
#adb shell chmod 0755 /data/media/0/PartitionImages/backupPartitions.sh
#adb shell /data/media/0/PartitionImages/backupPartitions.sh
#adb pull /data/media/0/PartitionImages .\PartitionImages
max_blocks=102400
names=""
compress=0
while getopts "h?bzn:" opt; do
case "$opt" in
h|\?)
echo "Usage $0 [-z] [-b MaxBlocks] [-n partition1 ] [-n partition2 ]"
echo " options:"
echo "-z optional to tar.gz the output folder default=false"
echo "-b 102400 optional maximum number of blocks of the partition - 0 will dump all partitions default=$max_blocks"
echo "-n partitionName... optional - one or more partitions to dump"
exit 0
;;
z) compress=1
;;
b) max_blocks=$OPTARG
;;
n) names+=" $OPTARG"
;;
esac
done
script=$(readlink -f "$0")
script_path=$(dirname "$script")
serial=$(cat /sys/class/android_usb/f_accessory/device/iSerial)
serial_date=$serial/$(date +"%Y_%m_%d_%H_%M_%S")
output_path=$script_path/$serial_date
echo "********************************"
echo "Backup partitions TO $output_path"
echo "********************************"
mkdir -p $output_path
part_dir=$(find /dev/block/platform -name by-name)
partitions=$(ls -la $part_dir | awk '{if ( $10 == "->") print $9 ">" $11 }')
getprop > $output_path/build.prop
echo "Id Name Size MD5" > $output_path/partitions.txt
for f in $partitions
do
part_id=$(echo $f | sed 's/^[^>]*>\/dev\/block\///')
part_name=$(echo $f | sed 's/>.*//')
size=$(cat /proc/partitions | awk -v p=$part_id '{if ( $4 == p ) print $3}')
checksum="0"
skip=0
if [ $max_blocks -gt 0 -a $size -gt $max_blocks ]
then
skip=1
echo "Skipping $part_name Id $part_id due to size"
else
if [ "$names" -ne "" ]
then
if echo $names | grep -w $part_name > /dev/null; then
skip=0
else
skip=1
echo "Skipping $part_name Id $part_id"
fi
fi
fi
if [ "$skip" -eq "0" ]
then
echo "Processing $part_name Id $part_id Size $size";
dd if=/dev/block/$part_id of=$output_path/$part_name.img
checksum=$(md5sum -b $output_path/$part_name.img | sed 's/ .*//')
fi
echo "$part_id $part_name $size $checksum" >> $output_path/partitions.txt
done
if [ "$compress" -eq "1" ]
then
cd $script_path
tar cz $serial_date > $output_path.tar.gz
rm -rf $output_path
fi
its from an old Xda Dev thread original post and author
givitago
I tried by guidelines from an "Appendix N. Converting DOS Batch Files to Shell Scripts" from another site to turn the shell script variables into batch script ones but since I got no experience with either of them my attempt turned into an amalgamation of the two's code in one..
Spoiler: it turned Into THIS
Code:
::adb shell mkdir /data/media/0/PartitionImages
::adb push .\backupPartitions.sh /data/media/0/PartitionImages/backupPartitions.sh
::adb shell chmod 0755 /data/media/0/PartitionImages/backupPartitions.sh
::adb shell /data/media/0/PartitionImages/backupPartitions.sh
::adb pull /data/media/0/PartitionImages .\PartitionImages
%max_blocks==102400
%names==""
%compress==0
while getopts "h?bzn:" opt; do
case "$opt" in
h|\?)
echo "Usage $0 [-z] [-b MaxBlocks] [-n partition1 ] [-n partition2 ]"
echo " options:"
echo "-z optional to tar.gz the output folder default=false"
echo "-b 102400 optional maximum number of blocks of the partition - 0 will dump all partitions default=$max_blocks"
echo "-n partitionName... optional - one or more partitions to dump"
exit 0
;;
z) compress=1
;;
b) max_blocks=$OPTARG
;;
n) names+=" $OPTARG"
;;
esac
done
%script%==%(echo %CD% "%0")
%script_path%==(dirname "%script")
%serial%==%(adb shell cat /sys/class/android_usb/f_accessory/device/iSerial)
%serial_date%==%serial% /%(date +"%Y_%m_%d_%H_%M_%S")
%output_path%==%script_path%/%serial_date%
echo "********************************"
echo "Backup partitions TO $output_path"
echo "********************************"
mkdir -p %output_path%
%part_dir%==%(adb shell find /dev/block/platform -name by-name)
%partitions%==%(ls -la %part_dir% | awk '{if ( %10 == "->") print %9 ">" %11 }')
adb shell getprop > %output_path%/build.prop
echo "Id Name Size MD5" > %output_path%/partitions.txt
for %%i in %partitions do
%part_id=%(echo %f | sed 's/^[^>]*>\/dev\/block\///')
%part_name=%(echo %f | sed 's/>.*//')
%size=%(adb shell cat /proc/partitions | awk -v p==%part_id% '{if ( %4 == p ) print %3}')
checksum="0"
skip==0
if [ %max_blocks -gt 0 -a %size -gt %max_blocks ]
then
skip=1
echo "Skipping %part_name% Id %part_id% due to size"
else
if [ "%names" -ne "" ]
then
if echo %names | grep -w %part_name% > /dev/null; then
skip==0
else
skip==1
echo "Skipping %part_name% Id %part_id%"
fi
fi
fi
if [ "$skip" -eq "0" ]
then
echo "Processing %part_name% Id %part_id% Size %size";
'adb shell pull' /dev/block/%part_id% %output_path%/%part_name%.img
checksum==%(md5sum -b %output_path%/%part_name%.img | sed 's/ .*//')
fi
echo "%part_id% %part_name% %size %checksum" >> %output_path%/partitions.txt
done
if [ "%compress" -eq "1" ]
then
cd %script_path%
tar cz %serial_date% > %output_path%.tar.gz
rm -rf %output_path%
fi
additionally I have pretty much all linux commands's binaries on the same folder as the .bat script so as long as the syntax is correct and nothing finniky going on it should work technically but since I got no experience I can't do this on my own...
You may use the DOS script used here
[TOOL][ADB][WIN]Android Partitions Backupper / Cloner
Hi all, wrote a Windows CMD script that backups / clones partitions of an Android device via ADB because I wasn't content with any 3rd-party APK what claims to do this job. The backups /clones are stored on Windows computer as...
forum.xda-developers.com
as a template.
jwoegerbauer said:
You may use the DOS script used here
[TOOL][ADB][WIN]Android Partitions Backupper / Cloner
Hi all, wrote a Windows CMD script that backups / clones partitions of an Android device via ADB because I wasn't content with any 3rd-party APK what claims to do this job. The backups /clones are stored on Windows computer as...
forum.xda-developers.com
as a template.
Click to expand...
Click to collapse
I have tried that script itself and it failed at "DM-Verity" and SELinux enforcement also for some reason no logs at all in temp folder