I want to connect my android device (nexus 7 2013) to an openvpn server which is not administrated by me, meaning I have no access on the configuration.
On my windows7-pc, I do this with the windows version of openvpn, the provided settings file for the openvpn server and the also provided pem-certificate.
Since the server uses the tap device of openvpn, alternative clients like openvpn for android by arne schwabe[1] don't work (this app doesn't support tap).
Since I don't have a private key file (*.key), I cannot generate a p12-file[2] which could be imported by the official openvpn app[3].
The pem-fileformat is compatible to *.cer and *.crt, meaning, I can simply change the file extension to "convert" them. The crt-file can be imported by the android systems (security -> import), but this doesn't help openvpn as it seems to only use it's own certificates.
Any suggestions on how to achieve a successful connection?
[1]: play.google.com/store/apps/details?id=de.blinkt.openvpn
[2]: blog.max.berger.name/2010/01/pem-fromto-p12.html
[3]: play.google.com/store/apps/details?id=net.openvpn.openvpn
wifi
i think if you have ICS_P740AV1.0.0B07 + you can't find open hot spot and if you can see you can't connect.
Try to make one hostop secured with wpa2 and try it.
k0tsompakos said:
i think if you have ICS_P740AV1.0.0B07 + you can't find open hot spot and if you can see you can't connect.
Try to make one hostop secured with wpa2 and try it.
Click to expand...
Click to collapse
Whoa, i only understand half of it
I have android 4.3 JSS15Q rooted with flo (?). I have superSU and Busybox installed. I followed the default instructions of the nexus root toolkit. My wifi is connected for sure, but it has blocked ports (which is the reason for all this). However, since I'm failing at an earlier stage, and, since it works from my pc from the same network with the same openvpn on the same ports I suppose the error is not in the network settings...
The wifi i'm connected to has wpa2+pkip etc. but I'm not sure how this is relevant...
rom
you have installed a custom rom?
you have try to enable and disable airplane mode?
you have data conenction?
k0tsompakos said:
you have installed a custom rom?
you have try to enable and disable airplane mode?
you have data conenction?
Click to expand...
Click to collapse
I have stock android rooted. I only have wifi and the connection works perfectly, I tried rebooting the device, I consider this counts as "dis/enable airplane mode". I have good wifi signal strength.
I have no issues accessing websites over port 80/443, only the blocked ports don't work. The openvpn server is reachable on port 443 (it works from my pc).
Hello,
did you ever manage to solve this? I'm looking to configure my nexus 7 2013 to connect to an OpenVPN server using TAP and it doesn't seem to be working. I'm using OpenVPN settings with certificate-based authentification. I'm able to connect to my server, however I don't get a local IP address assigned and when I browse the internet, my IP is still showing up as from the original connection instead of the VPN endpoint. Computers with windows 7 can connect to the server no-problem and all their traffic is directed to the tunnel. Any ideas for guides and walkthroughs?
Thanks. Any help is very much appreciated.
Some research into bypassing T-mobile’s tether restrictions reveals there are several things carriers can do to detect hotspot usage and block those packets:
-is hotspot data sent through a second anp?
-does carrier mark the packets coming through the wlan interface?
-do they filter by user agent strings?
-do they view the ttl?
-do they block urls that phones do not use?
-do they have a monitoring app pre-installed? (ex delete com.tmobile.pr via titanium backup)
Getting around these restrictions while using the native hotspot functionality requires work-arounds that I did not go far enough to successfully implement. One cannot by default edit the APNs for instance. I had to set up a duplicate, but theorize T-mobile was still routing to the hotspot APN I could not edit. With root access (which I have) it should be possible to achieve success, but I have found satisfactory non-root ways of achieving unlimited internet with MetroPCs (owned by T-mobile). I have, however, compiled a number of resources and may look back into what hacks must be used on the native app in the future. If anyone has a good guide on how you're getting hotspot with the Nougat LG V10 please post!
It stands to reason that one must use a non-native application to disguise the tether usage, or significantly modify the native one. After stalling with the mods, I pursued the non-native of attack and found (2) independent working ways to get unlimited tethered internet.
Wifi Tethering apps
I tried various wifi tether apps and without additional modifications or configuration I could not get them to work including:
-native hotspot (which works despite not having a hotspot plan, but t-mobile blocks)
-Wifi tether router by Fabio Grasso ($2.90) (requires root access)--(t-mobile was blocking the connection)—in discussion with developer on how to get working, will update. UPDATE: After back and forth with dev, he recommended using a VPN. His app does route the VPN through the hotspot connection if that feature is toggled. I have not tested. Potentially, changing the TTL of the computer may do something.
-Open Garden Wifi Tether—crashed when attempting to start service
Wifi Direct apps:
Wifi apps such as NetShare (red-themed play store entry is completely free, several paid versions) which use the native wifi direct functionality create a proxy server through which you can connect to via wifi. These DO WORK without additional modifications, but most native desktop apps on your computer cannot access the internet. All websites will load however. You have to set up your internet connection as through a proxy server on the client side but do not need to install additional software. A GOOD OPTION TO HAVE. I have found that one sometimes may need to stop and start the service to get it to give you internet access. The way I do it is start then quickly bring up the wifi menu, computer recognizes the network and connects quickly. If there is too much of a delay between starting and connecting via the client Netshare(Pro) doesn’t seem to work without a quick disable/enable afterwards.
USB tethering apps:
Rely on the phone’s native USB debugging feature in the hidden developer tools menu. (Go to about phone, software info, and tap on build repeatedly until enabled.) NO ROOT required. I tested Easy Tether ($9.99) and ClockWorkMod Tether ($4.99). Both worked well. PDAnet+ may also fall into this category but I have not researched. THIS IS MY PREFERRED METHOD so far. It is also possible to USB tether to certain types of wifi routers and thus get wifi for the home.
-There are PC, Mac, or Linux applications and drivers which must be installed on the computer side.
-Must have USB debugging enabled, and USB options set to Photo Transfer (Media Transfer does not work, and why I originally failed with ClockWorkMod…otherwise probably would have not pursued root!)
-These USB tether apps have the benefit of reducing the heat generated by your phone (no wifi signal generation), so runs cooler (think chips last longer) and uses less energy than when you have wifi hotspot enabled. For this reason, and for the phone being so handy when connected to my laptop, I actually prefer this method. Plus you have access to the pictures and DICM folders of internal storage so you can transfer stuff to the phone fairly immediately. To get full access, however, you’ll have to switch to MTTP mode, which on LG phones such as this V10 will break the internet connection. Other phones may not have this particular issue.
Bluetooth Tether apps:
Easy Tether and probably PDAnet+ support Bluetooth tether. With easy tether I wouldn’t suspect any issues at all using this.
Potential other methods WHICH SEEMED PROMISING, I sorted through a lot! For your inspiration:
-One youtuber mentioned using a desktop hospot application + PDAnet+ to get legit wifi hotspot functionality. The desktop PDAnet+ application apparently disguises the tethering operation. Video here: https://youtu.be/D98abWOkkQI
-Exposed framework and tether for rooted devices (did not try): https://highonandroid.com/android-a...n-rooted-android-att-t-mobile-sprint-verizon/
-Claims you’ll be able to tether any rooted android with this rooted wifi app and particular settings (similar to wifi tether router) https://highonandroid.com/android-a...android-smartphone-or-tablet-universal-guide/ (UPDATE: I tried, app is not compatible with the phone)
See comments section of this article for the below quotes: https://www.groovypost.com/howto/hide-data-usage-get-truly-unlimited-tethering-tmobile-one/
----------------------------------------------------------------------------
“The main issue I see people having is the lack of apn editing. This has been my setup for four years now
-Dd-wrt with iptables to edit the ttl value to 65 -Change TTL on windows PC to 65 so that it appears data is coming from the phone. (41 in hex = 65 in dec) https://social.technet.microsoft.co...o-live-ttl-in-windows?forum=w7itpronetworking
-Changed apn of hotspot to match the apn of normal mobile date. Doesn’t matter if you use fast.xxxx.com or alpha/beta BUT YOU CANT USE THE ORIGINAL HOTSPOT APN it’ll say mobile web or some ****. If you do you will be routed through their hotspot server and tracked. I’ve done this on iOS and android.
-FOR THE FOLKS THAT SAY THE VPN DOESNT WORK. Once again you MUST change the apn AND you have to make sure that your traffic is actually being routed through the VPN, in my experience on both android and iOS hotspot traffic bypass your phones VPN, and VPN on the router/computer traveling through the phone can be tracked if the phone isn’t the one using the VPN, to make it force traffic through the VPN I had to use the for data option in the tether me app on iOS. These things all work if you do it properly.”--Wifi tether router does have this VPN routing function but I have not tested.
"My COMBO works for me on T-Mobile unlimited.
Nexus 5x – rooted 6.01 with “settings put global tether_dun_required 0”
PLUS
Asus n31u router (w/ net.ipv4.ip_default_ttl = 65, bridge mod)
Works for Window 7 desktop and laptop, chromebook, and tablets. All about 80 Gigs last month”
“The TTLstands for “time to live” it is a counter on the data you send for its maximum hop count, or the number of devices it can travel through, for ever device it goes down by one, windows has a default TTL of 128, while Android has one of 64, if you change the TTL for windows to 65 when it gets to the phone the TTL will go down by one makeing it equal 64 the same as the phone. There are more adwanced way to do this so you can run a whole network off this by using a router with either DD-wrt, Tomatos or open-wrt or a dedicated pc running either pfsense, linux, or freebsd to act as a router and mangle the TTl on the fly, the benefits of this is it gets ALL of the data(windows seem to miss a small amount arohnd 5%) and its possible to edit the User agent in ways that dont mess up websites with squid and just appending the device.”
Reserved
For USB tether clients, ClockWorkMod seems to be programmed in a lower-level fashion and produce significantly less heat than running Easytether. I will be monitoring and update.
Arr123 said:
Some research into bypassing T-mobile’s tether restrictions reveals there are several things carriers can do to detect hotspot usage and block those packets:
-is hotspot data sent through a second anp?
-does carrier mark the packets coming through the wlan interface?
-do they filter by user agent strings?
-do they view the ttl?
-do they block urls that phones do not use?
-do they have a monitoring app pre-installed? (ex delete com.tmobile.pr via titanium backup)
Getting around these restrictions while using the native hotspot functionality requires work-arounds that I did not go far enough to successfully implement. One cannot by default edit the APNs for instance. I had to set up a duplicate, but theorize T-mobile was still routing to the hotspot APN I could not edit. With root access (which I have) it should be possible to achieve success, but I have found satisfactory non-root ways of achieving unlimited internet with MetroPCs (owned by T-mobile). I have, however, compiled a number of resources and may look back into what hacks must be used on the native app in the future. If anyone has a good guide on how you're getting hotspot with the Nougat LG V10 please post!
It stands to reason that one must use a non-native application to disguise the tether usage, or significantly modify the native one. After stalling with the mods, I pursued the non-native of attack and found (2) independent working ways to get unlimited tethered internet.
Wifi Tethering apps
I tried various wifi tether apps and without additional modifications or configuration I could not get them to work including:
-native hotspot (which works despite not having a hotspot plan, but t-mobile blocks)
-Wifi tether router by Fabio Grasso ($2.90) (requires root access)--(t-mobile was blocking the connection)—in discussion with developer on how to get working, will update. UPDATE: After back and forth with dev, he recommended using a VPN. His app does route the VPN through the hotspot connection if that feature is toggled. I have not tested. Potentially, changing the TTL of the computer may do something.
-Open Garden Wifi Tether—crashed when attempting to start service
Wifi Direct apps:
Wifi apps such as NetShare (red-themed play store entry is completely free, several paid versions) which use the native wifi direct functionality create a proxy server through which you can connect to via wifi. These DO WORK without additional modifications, but most native desktop apps on your computer cannot access the internet. All websites will load however. You have to set up your internet connection as through a proxy server on the client side but do not need to install additional software. A GOOD OPTION TO HAVE. I have found that one sometimes may need to stop and start the service to get it to give you internet access. The way I do it is start then quickly bring up the wifi menu, computer recognizes the network and connects quickly. If there is too much of a delay between starting and connecting via the client Netshare(Pro) doesn’t seem to work without a quick disable/enable afterwards.
USB tethering apps:
Rely on the phone’s native USB debugging feature in the hidden developer tools menu. (Go to about phone, software info, and tap on build repeatedly until enabled.) NO ROOT required. I tested Easy Tether ($9.99) and ClockWorkMod Tether ($4.99). Both worked well. PDAnet+ may also fall into this category but I have not researched. THIS IS MY PREFERRED METHOD so far. It is also possible to USB tether to certain types of wifi routers and thus get wifi for the home.
-There are PC, Mac, or Linux applications and drivers which must be installed on the computer side.
-Must have USB debugging enabled, and USB options set to Photo Transfer (Media Transfer does not work, and why I originally failed with ClockWorkMod…otherwise probably would have not pursued root!)
-These USB tether apps have the benefit of reducing the heat generated by your phone (no wifi signal generation), so runs cooler (think chips last longer) and uses less energy than when you have wifi hotspot enabled. For this reason, and for the phone being so handy when connected to my laptop, I actually prefer this method. Plus you have access to the pictures and DICM folders of internal storage so you can transfer stuff to the phone fairly immediately. To get full access, however, you’ll have to switch to MTTP mode, which on LG phones such as this V10 will break the internet connection. Other phones may not have this particular issue.
Bluetooth Tether apps:
Easy Tether and probably PDAnet+ support Bluetooth tether. With easy tether I wouldn’t suspect any issues at all using this.
Potential other methods WHICH SEEMED PROMISING, I sorted through a lot! For your inspiration:
-One youtuber mentioned using a desktop hospot application + PDAnet+ to get legit wifi hotspot functionality. The desktop PDAnet+ application apparently disguises the tethering operation. Video here: https://youtu.be/D98abWOkkQI
-Exposed framework and tether for rooted devices (did not try): https://highonandroid.com/android-a...n-rooted-android-att-t-mobile-sprint-verizon/
-Claims you’ll be able to tether any rooted android with this rooted wifi app and particular settings (similar to wifi tether router) https://highonandroid.com/android-a...android-smartphone-or-tablet-universal-guide/ (UPDATE: I tried, app is not compatible with the phone)
See comments section of this article for the below quotes: https://www.groovypost.com/howto/hide-data-usage-get-truly-unlimited-tethering-tmobile-one/
----------------------------------------------------------------------------
“The main issue I see people having is the lack of apn editing. This has been my setup for four years now
-Dd-wrt with iptables to edit the ttl value to 65 -Change TTL on windows PC to 65 so that it appears data is coming from the phone. (41 in hex = 65 in dec) https://social.technet.microsoft.co...o-live-ttl-in-windows?forum=w7itpronetworking
-Changed apn of hotspot to match the apn of normal mobile date. Doesn’t matter if you use fast.xxxx.com or alpha/beta BUT YOU CANT USE THE ORIGINAL HOTSPOT APN it’ll say mobile web or some ****. If you do you will be routed through their hotspot server and tracked. I’ve done this on iOS and android.
-FOR THE FOLKS THAT SAY THE VPN DOESNT WORK. Once again you MUST change the apn AND you have to make sure that your traffic is actually being routed through the VPN, in my experience on both android and iOS hotspot traffic bypass your phones VPN, and VPN on the router/computer traveling through the phone can be tracked if the phone isn’t the one using the VPN, to make it force traffic through the VPN I had to use the for data option in the tether me app on iOS. These things all work if you do it properly.”--Wifi tether router does have this VPN routing function but I have not tested.
"My COMBO works for me on T-Mobile unlimited.
Nexus 5x – rooted 6.01 with “settings put global tether_dun_required 0”
PLUS
Asus n31u router (w/ net.ipv4.ip_default_ttl = 65, bridge mod)
Works for Window 7 desktop and laptop, chromebook, and tablets. All about 80 Gigs last month”
“The TTLstands for “time to live” it is a counter on the data you send for its maximum hop count, or the number of devices it can travel through, for ever device it goes down by one, windows has a default TTL of 128, while Android has one of 64, if you change the TTL for windows to 65 when it gets to the phone the TTL will go down by one makeing it equal 64 the same as the phone. There are more adwanced way to do this so you can run a whole network off this by using a router with either DD-wrt, Tomatos or open-wrt or a dedicated pc running either pfsense, linux, or freebsd to act as a router and mangle the TTl on the fly, the benefits of this is it gets ALL of the data(windows seem to miss a small amount arohnd 5%) and its possible to edit the User agent in ways that dont mess up websites with squid and just appending the device.”
Click to expand...
Click to collapse
I recently been looking into this as well. I've currently been using the new pdanet with with wifi direct but it seem to be hit or miss when getting a internet connection when using the proxy method. I have a few devices where i cant install the interface so im looking for reliable method
Few scenarios im looking at. The first one you cover quite a bit, was wondering if your using IPV4 or IPV6 with your different apn settings? 2nd scenario is being able to tether when connected to wifi like from a hotel and being able to pass that to other devices and the 3rd is being able to pass along a vpn connection if connected to free wifi places
Sorry for the necropost, I just wanted to point out that currently the only method you can use to hide tethering from T-mo is PDANet with it's "Hide Tether Usage" feature.
All other methods are detected and if you have tethering, will count against your tethering allotment.
majikfox said:
Sorry for the necropost, I just wanted to point out that currently the only method you can use to hide tethering from T-mo is PDANet with it's "Hide Tether Usage" feature.
All other methods are detected and if you have tethering, will count against your tethering allotment.
Click to expand...
Click to collapse
Thanks for the heads up. Just wanted to make sure since I wanted to try the TTL method, but that is also blocked by T-Mobile correct?
TTL 65 didn't work on my computers, but 85 and 99 did. So don't be afraid to try different things.
However, the phone should be able to modify the TTL before it forwards the packet. How is there not an app that does this, or is there a setting or hack we can do to make it change the TTL as it passes through the phone?
edit: have searched more and learned some apps do, but they don't work on my phone. Not sure why.
I have metro pcs with 15gb of hotspot data.. i run out every month.. once my data runs out i use hotspotvpn. A free app on the google play store and it works for everything.. been doing it for months..never had any issues
CHEEF WALKING-FROG said:
I have metro pcs with 15gb of hotspot data.. i run out every month.. once my data runs out i use hotspotvpn. A free app on the google play store and it works for everything.. been doing it for months..never had any issues
Click to expand...
Click to collapse
Which one do you use? I saw a few that had the same name
Same here metro
13crigby said:
Which one do you use? I saw a few that had the same name
Click to expand...
Click to collapse
Im also wondering which app you're referring to. Theres quite a few with that name
CHEEF WALKING-FROG said:
I have metro pcs with 15gb of hotspot data.. i run out every month.. once my data runs out i use hotspotvpn. A free app on the google play store and it works for everything.. been doing it for months..never had any issues
Click to expand...
Click to collapse
Let me third the request. I just clocked through 8 or 9 different apps with that name. Who is the publisher?
Thanks!
Bypass With Termux
I've done this for ever and it's not going to be restricted to who you have but it will 100 percent get around any data throttling.
Download Termux app and install openssh-server on it. Go ahead and hotspot your phone, then run ifconfig inside Termux to get your current tethering local IP. It will be the only 192. spit out when you run ifconfig. Save this. Run sshd -dD inside Termux which starts an openssh server waiting to be connected to in debug mode to audit traffic. Now pop onto a PC or router you can SSH into, whatever and connect it to your hotspot from your phone. Now SSH tunnel all the traffic from the device back through the openssh server your running on the Termux app. Now that you are on the same local network you can SSH tunnel into that IP address you saved earlier. As long as you make sure all your traffic passes through the tunnel it 100 percent shows that all your internet is being used by Termux app not your hotspot app so you need no other spoofing of hops or anything because to your phone and carrier you are just using a bunch of data in termux, you do it right you will never be throttled I've used 150GB data multiple times.
Step by step > https://github.com/RiFi2k/unlimited-tethering
RiFi2k said:
I've done this for ever and it's not going to be restricted to who you have but it will 100 percent get around any data throttling.
Download Termux app and install openssh-server on it. Go ahead and hotspot your phone, then run ifconfig inside Termux to get your current tethering local IP. It will be the only 192. spit out when you run ifconfig. Save this. Run sshd -dD inside Termux which starts an openssh server waiting to be connected to in debug mode to audit traffic. Now pop onto a PC or router you can SSH into, whatever and connect it to your hotspot from your phone. Now SSH tunnel all the traffic from the device back through the openssh server your running on the Termux app. Now that you are on the same local network you can SSH tunnel into that IP address you saved earlier. As long as you make sure all your traffic passes through the tunnel it 100 percent shows that all your internet is being used by Termux app not your hotspot app so you need no other spoofing of hops or anything because to your phone and carrier you are just using a bunch of data in termux, you do it right you will never be throttled I've used 150GB data multiple times.
Click to expand...
Click to collapse
This is amazing. How do I use my Windows PC to connect to the openSSH server to create the traffic tunnel? Also, how do I force my Windows 10 traffic through the tunnel?
I am guessing with Putty and then setup SSH proxy in a browser to force traffic? Won't that only allow browser based traffic through the tunnel and not all traffic from the Windows computer?
VICosPhi said:
This is amazing. How do I use my Windows PC to connect to the openSSH server to create the traffic tunnel? Also, how do I force my Windows 10 traffic through the tunnel?
I am guessing with Putty and then setup SSH proxy in a browser to force traffic? Won't that only allow browser based traffic through the tunnel and not all traffic from the Windows computer?
Click to expand...
Click to collapse
So I am an everyday linux user and for me personally I use sshuttle to route everything back through the tunnel because it already handles the TCP over TCP problem because the guy that wrote it is a boss. This here explains that.
If I was on windows I would go with their vagrant solution because then you get the benefit of sshuttle and all your responsible for is making sure all traffic goes through the VM. Also you could use something like proxycap and putty works as well although I guess it's slow people have said.
Browser traffic can be handled with SOCKS proxies.
I feel like it's a pretty great solution overall and can benefit some people so I started a repo and I'll fully document how it works, I'm just too tired tonight so keep an eye out https://github.com/RiFi2k/unlimited-tethering and I'll step by step linux and windows for everyone as much as possible, plus if anyone else has scripts and whatnot feel free to contribute.
RiFi2k said:
So I am an everyday linux user and for me personally I use sshuttle to route everything back through the tunnel because it already handles the TCP over TCP problem because the guy that wrote it is a boss. This here explains that.
If I was on windows I would go with their vagrant solution because then you get the benefit of sshuttle and all your responsible for is making sure all traffic goes through the VM. Also you could use something like proxycap and putty works as well although I guess it's slow people have said.
Browser traffic can be handled with SOCKS proxies.
I feel like it's a pretty great solution overall and can benefit some people so I started a repo and I'll fully document how it works, I'm just too tired tonight so keep an eye out https://github.com/RiFi2k/unlimited-tethering and I'll step by step linux and windows for everyone as much as possible, plus if anyone else has scripts and whatnot feel free to contribute.
Click to expand...
Click to collapse
Thanks a lot, will read up on this. Adding your github to my bookmarks as well. :good:
RiFi2k said:
I've done this for ever and it's not going to be restricted to who you have but it will 100 percent get around any data throttling.
Download Termux app and install openssh-server on it. Go ahead and hotspot your phone, then run ifconfig inside Termux to get your current tethering local IP. It will be the only 192. spit out when you run ifconfig. Save this. Run sshd -dD inside Termux which starts an openssh server waiting to be connected to in debug mode to audit traffic. Now pop onto a PC or router you can SSH into, whatever and connect it to your hotspot from your phone. Now SSH tunnel all the traffic from the device back through the openssh server your running on the Termux app. Now that you are on the same local network you can SSH tunnel into that IP address you saved earlier. As long as you make sure all your traffic passes through the tunnel it 100 percent shows that all your internet is being used by Termux app not your hotspot app so you need no other spoofing of hops or anything because to your phone and carrier you are just using a bunch of data in termux, you do it right you will never be throttled I've used 150GB data multiple times.
Step by step > https://github.com/RiFi2k/unlimited-tethering
Click to expand...
Click to collapse
Had any user tried this already and confirm that it works with metropcs?
Pdanet+ documentation details that only usb tether+hide tether usage works with metropcs. It took me a while to go around all of it, but I haven't tested due to I want to switch carriers to metropcs.
RiFi2k said:
I've done this for ever and it's not going to be restricted to who you have but it will 100 percent get around any data throttling.
Download Termux app and install openssh-server on it. Go ahead and hotspot your phone, then run ifconfig inside Termux to get your current tethering local IP. It will be the only 192. spit out when you run ifconfig. Save this. Run sshd -dD inside Termux which starts an openssh server waiting to be connected to in debug mode to audit traffic. Now pop onto a PC or router you can SSH into, whatever and connect it to your hotspot from your phone. Now SSH tunnel all the traffic from the device back through the openssh server your running on the Termux app. Now that you are on the same local network you can SSH tunnel into that IP address you saved earlier. As long as you make sure all your traffic passes through the tunnel it 100 percent shows that all your internet is being used by Termux app not your hotspot app so you need no other spoofing of hops or anything because to your phone and carrier you are just using a bunch of data in termux, you do it right you will never be throttled I've used 150GB data multiple times.
Step by step > https://github.com/RiFi2k/unlimited-tethering
Click to expand...
Click to collapse
Hey bro!! Thank you !!
This is great idea, I would try it on my country to see if this works
myself379 said:
Hey bro!! Thank you !!
This is great idea, I would try it on my country to see if this works
Click to expand...
Click to collapse
For sure! See the nice thing about this method is that your phone doesn't register any of the data used as coming from the tethering app, it 100% all gets attributed to the Termux app because of the SSH tunnel. So basically there is no way for anyone at your carrier to know, or prove that you actually were tethering at all. If you open up the apps section and check out the part where it shows you how much data each app used you will see what I mean. So basically it really doesn't matter what country / carrier / phone you have, as long as you have access to be able to tether and you have a computer you can use for the SSH tunnel it's impossible for them to throttle you because they can't prove you actually used the data tethering. When you read the fine print about them throttling it basically says the same thing, if they can't definitively prove the data came from tethering it doesn't go on your tethering cap.
Hello RiFi2k,
OK, thanks for the information. I'm trying to translate this into a windows environment(Windows 10 phone and PC).
Here is what I have so far, but a few of your points are unclear. A little clarity would be fantastic.
Translation for Windows 10 phone
Since, I'm on a windows phone there is no Termux app. I guess Termux is used to install the SSH server and gain access to a command prompt, correct?
1. Ok since openssh server is built into the windows phone OS and I can access the command prompt via putty, I should be fine, right.
2. Generate key pair and stored public key on phone. Working fine.
3. Hotspot connection to phone.
4. Run ipconfig(windows) on phone or local machine. On local machine, gateway address is the needed ip, same as hotspot address on phone.
5. SSH Server is started on phone once the phone is placed in development mode.
Can't put server in debug mode on phone, but I'm pretty certain that it's hard coded to listen on port 22.
6. Your instructions on github.com have duplicated the step number 5, which should be 6 and I am having a little trouble sorting through it.
7. I guess the only way to tunnel to the phone is to run a putty session from the Windows machine configured per your instructions.
Are these commands executed on the device or phone?:
ssh -D 8123 -fqgN [email protected].1 -p 22 (ssh client)
sshuttle -r [email protected].1:22 0.0.0.0/0 0.0.0.0 (sock proxy)
Either way, I will need to use putty for the SSH Client portion. What are the switches in your example "-fqgN"? Are the switches concatenated?
-f Specifies a per-user configuration file.
-q Quiet mode
-g Allows remote hosts to connect to local forwarded ports.
-N ???
And finally, depending on where the above commands are run, I will need to find a sock proxy solution, if I want all traffic going through the tunnel.
Again, thanks for all your hard work.
davy4620 said:
Hello RiFi2k,
OK, thanks for the information. I'm trying to translate this into a windows environment(Windows 10 phone and PC).
Here is what I have so far, but a few of your points are unclear. A little clarity would be fantastic.
Translation for Windows 10 phone
Since, I'm on a windows phone there is no Termux app. I guess Termux is used to install the SSH server and gain access to a command prompt, correct?
1. Ok since openssh server is built into the windows phone OS and I can access the command prompt via putty, I should be fine, right.
2. Generate key pair and stored public key on phone. Working fine.
3. Hotspot connection to phone.
4. Run ipconfig(windows) on phone or local machine. On local machine, gateway address is the needed ip, same as hotspot address on phone.
5. SSH Server is started on phone once the phone is placed in development mode.
Can't put server in debug mode on phone, but I'm pretty certain that it's hard coded to listen on port 22.
6. Your instructions on github.com have duplicated the step number 5, which should be 6 and I am having a little trouble sorting through it.
7. I guess the only way to tunnel to the phone is to run a putty session from the Windows machine configured per your instructions.
Are these commands executed on the device or phone?:
ssh -D 8123 -fqgN [email protected].1 -p 22 (ssh client)
sshuttle -r [email protected].1:22 0.0.0.0/0 0.0.0.0 (sock proxy)
Either way, I will need to use putty for the SSH Client portion. What are the switches in your example "-fqgN"? Are the switches concatenated?
-f Specifies a per-user configuration file.
-q Quiet mode
-g Allows remote hosts to connect to local forwarded ports.
-N ???
And finally, depending on where the above commands are run, I will need to find a sock proxy solution, if I want all traffic going through the tunnel.
Again, thanks for all your hard work.
Click to expand...
Click to collapse
Ok, so the N is `-N Do not execute a remote command. This is useful for just forwarding ports (protocol version 2 only).` reference https://linux.die.net/man/1/ssh
It's completely fine if you don't have debug mode on when you start the sshd server on your phone, you actually don't technically need any flags. One is debug and one is detached so it runs in the background, which you are generally going to want.
Both those commands are run on your computer, but you only use one or the other. Follow my link to sshuttle they have information for using it on Windows, it will transparently route all your traffic through the tunnel for you already so it's way better than anything else.
So just to recap, you start the sshd (ssh server) on your phone and it will spit out a port. Then you go to your PC and ssh or sshuttle (ssh client) connect to your phone.
I'm around if you need more help!
---------- Post added at 12:44 AM ---------- Previous post was at 12:40 AM ----------
Also once you get it working on Windows with your phone if you don't mind letting me know what version of Windows and what model your phone is, and where the directions hung you up, because I'll mention it all to help the next person.
Thanks for the quick reply. I'm going to have to dig a little deeper. It looks as if Microsoft is doing some kind of filtering on the WiFi interface and blocking this approach. Again, thanks for the great start.