Related
Hello fellow A2 Lite owners!
I just got this device today and would LOVE to root 10.0.7.0, However it seems like the only way to go through this is by using a patched boot image which is not viable because none have showed up for 10.0.7.0 yet.
Will there be any other solutions for this? Thank you.
lgstylus2root said:
Hello fellow A2 Lite owners!
I just got this device today and would LOVE to root 10.0.7.0, However it seems like the only way to go through this is by using a patched boot image which is not viable because none have showed up for 10.0.7.0 yet.
Will there be any other solutions for this? Thank you.
Click to expand...
Click to collapse
I personally feel installing twrp offians twrp and flashing magisk is easyer
rob420p said:
I personally feel installing twrp offians twrp and flashing magisk is easyer
Click to expand...
Click to collapse
Obviously, It is my preferred way since I used it on a couple of devices including my Redmi Note 4 and Mi Pad.
My concern is not OTA but whether it would somehow break the ROM
Yes, I am aware of Mi Flash, Flashing stock ROMS, and other techniques but it's just that i don't have time for such long endeavors and would like to have a safe-ish way.
However I will try to get twrp running temporarily to install magisk.
lgstylus2root said:
Obviously, It is my preferred way since I used it on a couple of devices including my Redmi Note 4 and Mi Pad.
My concern is not OTA but whether it would somehow break the ROM
Yes, I am aware of Mi Flash, Flashing stock ROMS, and other techniques but it's just that i don't have time for such long endeavors and would like to have a safe-ish way.
However I will try to get twrp running temporarily to install magisk.
Click to expand...
Click to collapse
No it will not break the ROM I'm running the March update with twrp n magisk the only thing that does not work is backup n restore there is a new twrp 3.3.3.0 but I haven't installed it yet.
rob420p said:
No it will not break the ROM I'm running the March update with twrp n magisk the only thing that does not work is backup n restore there is a new twrp 3.3.3.0 but I haven't installed it yet.
Click to expand...
Click to collapse
How did you get TWRP to work? I am using the official image but whenever i boot into the .img, click cancel as instructed, and install the twrp zip, the result is that when i try to boot into recovery it says System has been destroyed (recovery only, normal boot is ok)
lgstylus2root said:
How did you get TWRP to work? I am using the official image but whenever i boot into the .img, click cancel as instructed, and install the twrp zip, the result is that when i try to boot into recovery it says System has been destroyed (recovery only, normal boot is ok)
Click to expand...
Click to collapse
Go to the pa ROM page and use that twrp that's offians twrp.the best guild ive seen n is type in customdriod mi a2 lite twrp and that page is the best in my opinion to follow I'll see if I can get a link for the page in a minute
Won't let me simend the link
rob420p,
Please provide links.
rob420p said:
Won't let me simend the link
Click to expand...
Click to collapse
Would you be capable of private messaging me the link?
I might have been able to find the link:
ww w.thecustom droid.com /install-twrp-recovery-root-xiaomi-mi-a2-a2-lite
Obviously remove all spaces.
lgstylus2root said:
I might have been able to find the link:
ww w.thecustom droid.com /install-twrp-recovery-root-xiaomi-mi-a2-a2-lite
Obviously remove all spaces.
Click to expand...
Click to collapse
I have followed this guide but it would always result in the installed version of TWRP not installing correctly, and the system mentioning "The System has been destroyed, Press power button to shut down"
How can i resolve this?
I just uploaded the boot and patched_boot imgs for 10.0.7.0 (March update) here are the links:
Stock boot.img : https://drive.google.com/open?id=17ukUahutrGCcx38ZXfzMaCCle71M_QuP
Patched boot.img with latest Magisk (07.04.2019 - I suggest patching the stock on your own to root the device) : https://drive.google.com/open?id=1RxFZcwi0utL3qGp9LKDMneBbggNMHmGY
marstonpear said:
I just uploaded the boot and patched_boot imgs for 10.0.7.0 (March update) here are the links:
Stock boot.img : https://drive.google.com/open?id=17ukUahutrGCcx38ZXfzMaCCle71M_QuP
Patched boot.img with latest Magisk (07.04.2019 - I suggest patching the stock on your own to root the device) : https://drive.google.com/open?id=1RxFZcwi0utL3qGp9LKDMneBbggNMHmGY
Click to expand...
Click to collapse
I figured out how to do it either way, thank you for your efforts however!
lgstylus2root said:
I figured out how to do it either way, thank you for your efforts however!
Click to expand...
Click to collapse
You can add the links to the main thread so that people can see :good:
Hi
Im trying to root V10.0.7.0.PDLMIXM Android on my A2 Lite with Magisk.
After fastboot boot patched_boot.img
Im getting bootloop, phone cannot boot (google lines endless loading).
After restart, goes well but no root.
Please help ! Thanks
max-damage said:
Hi
Im trying to root V10.0.7.0.PDLMIXM Android on my A2 Lite with Magisk.
After fastboot boot patched_boot.img
Im getting bootloop, phone cannot boot (google lines endless loading).
After restart, goes well but no root.
Please help ! Thanks
Click to expand...
Click to collapse
Search before asking : https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-proper-support-ota-t3836952
I did search and I followed procedure.
My phone fails to boot on step 10. when I load temporary patched boot.img over fastboot.
Thats my current problem.
I tried to load up downloaded pached boot.img for version V10.0.7.0.PDLMIXM
I also tried to make patched boot.img from original boot.img over phone via Magisk. It doesnt work, bootloop again.
max-damage said:
I did search and I followed procedure.
My phone fails to boot on step 10. when I load temporary patched boot.img over fastboot.
Thats my current problem.
I tried to load up downloaded pached boot.img for version V10.0.7.0.PDLMIXM
I also tried to make patched boot.img from original boot.img over phone via Magisk. It doesnt work, bootloop again.
Click to expand...
Click to collapse
I'm stuck with the same problem.
Booting with patched_boot.img (made on my own or downloaded from this forum) make the phone not starting, blocked on white screen.
Have you already solved?
lgstylus2root said:
How did you get TWRP to work? I am using the official image but whenever i boot into the .img, click cancel as instructed, and install the twrp zip, the result is that when i try to boot into recovery it says System has been destroyed (recovery only, normal boot is ok)
Click to expand...
Click to collapse
Only boot twrp not to Flash it...
Boot twrp command » fastboot boot twrp.img
Flash twrp command » fastboot flash recovery twrp.img
I assume you tried "flashing twrp" command, if that's the case it will replace your boot.img to twrp.img that's why it appears the "system has been destroyed" error... Try the "boot twrp command" if you want to access twrp temporarily... Coz right now we cant do(flash full twrp recovery) that as far as I know....
Winchester316 said:
Only boot twrp not to Flash it...
Boot twrp command » fastboot boot twrp.img
Flash twrp command » fastboot flash recovery twrp.img
I assume you tried "flashing twrp" command, if that's the case it will replace your boot.img to twrp.img that's why it appears the "system has been destroyed" error... Try the "boot twrp command" if you want to access twrp temporarily... Coz right now we cant do(flash full twrp recovery) that as far as I know....
Click to expand...
Click to collapse
I believe we can I have heard reports offains 3.3.3. Twrp can do it I haven't tryed yet.but I did have twrp with root running on the march update but I'm on pa now
Hey Guys Today i am happy to publish TWRP for Redmi 8A DUAL
Install Process:-
1. Go to bootloader mode by pressing (vol down + power)
2.type this below command
fastboot flash recovery twrp.img
3.press (vol up + power) it will boot into TWRP.
TWRP DOWNLOAD LINK :- Download
If you want contribute to twrp device tree here is the Link
https://github.com/Aghora7/android_device_xiaomi_olivewood/tree/twrp
Reserved
Thanks great work. Btw, I've a favor to ask, my r8adual is in bootloop as i resized and recreated system,cust and userdata with parted, now it's messed up and device boolooping even after getting into fastboot mode.. My last resort is to resize the internal partition exactly as someone else's device. Could you please send me the partition table's picture if you've this device?
.excalibur said:
Thanks great work. Btw, I've a favor to ask, my r8adual is in bootloop as i resized and recreated system,cust and userdata with parted, now it's messed up and device boolooping even after getting into fastboot mode.. My last resort is to resize the internal partition exactly as someone else's device. Could you please send me the partition table's picture if you've this device?
Click to expand...
Click to collapse
nvm i got it fixed by service center, replicating the partition also didn't guarantee it'd fix
.excalibur said:
Thanks great work. Btw, I've a favor to ask, my r8adual is in bootloop as i resized and recreated system,cust and userdata with parted, now it's messed up and device boolooping even after getting into fastboot mode.. My last resort is to resize the internal partition exactly as someone else's device. Could you please send me the partition table's picture if you've this device?
Click to expand...
Click to collapse
Never play with partitions. i see you fixed it with reflashing entire system.anyway if you want anything related join official redmi 8a dual group.
Thanks for recovery but I have a doubt.
Should I need to patch the boot before flashing this?
Pavan__pavan said:
Thanks for recovery but I have a doubt.
Should I need to patch the boot b
Click to expand...
Click to collapse
no need to patch boot image from rom , patching boot image via yaalex site , that patching method is only needed while flashing magisk zip to root the phone
First boot phone into fastboot
Then flash recovery image through CMD or shell by fastboot flash recovery recovery.img command
I am unable to download recovery file giving 404 error
Please help me out
Adityasalil95 said:
no need to patch boot image from rom , patching boot image via yaalex site , that patching method is only needed while flashing magisk zip to root the phone
First boot phone into fastboot
Then flash recovery image through CMD or shell by fastboot flash recovery recovery.img command
Click to expand...
Click to collapse
Can you provide me twrp file i you have cause i am unable to download recovery file
Link is dead. Can someone provide a mirror please ?
TWRP 3.5.0_9.0 for Razer PhoneWhats working:
Almost everything
Follow The Guide To Install
https://forum.xda-developers.com/t/twrp-for-razer-phone.3727333/
Big Thanks
PIPIPIG233666
Download
TWRP Website
I tried the flashing instructions, but my Razer Phone is stuck on the Razer Logo "Powered By Android" screen.
Edit: Grabbed the wrong file! lol
FanboyStudios said:
I tried the flashing instructions, but my Razer Phone is stuck on the Razer Logo "Powered By Android" screen.
Edit: Grabbed the wrong file! lol
Click to expand...
Click to collapse
Mine is stuck at the Razer Logo "Powered by Android" screen as well. When I first installed TWRP it worked okay and I could access the menus, but now I can only access the Fastbook menu and the device is no longer recognized on my computer.
In FastBoot it's showing the following options:
START
Restart bootloader (does nothing but restart to the Razer Logo screen)
Unlock bootloader [Unlocked]
Recovery mode (does nothing but restart to the Razer logo screen)
Wipe Userdata
Power Off
Secure boot shows "yes"
DEVICE STATE - unlocked
Any suggestions?
Thanks
jkimrey said:
Mine is stuck at the Razer Logo "Powered by Android" screen as well. When I first installed TWRP it worked okay and I could access the menus, but now I can only access the Fastbook menu and the device is no longer recognized on my computer.
In FastBoot it's showing the following options:
START
Restart bootloader (does nothing but restart to the Razer Logo screen)
Unlock bootloader [Unlocked]
Recovery mode (does nothing but restart to the Razer logo screen)
Wipe Userdata
Power Off
Secure boot shows "yes"
DEVICE STATE - unlocked
Any suggestions?
Thanks
Click to expand...
Click to collapse
Which file did you download? ZIP or IMG?
If you downloaded the ZIP and tried to flash that with Fastboot, then you screwed up. You may need to download and flash a boot image. You can find this on the Razer Developer Portal, just Google search Razer Phone Stock ROM. You should keep a copy of the latest firmware anyway just in case their site goes down. Extract the zip and you'll want to flash "boot.img" using fastboot flash boot (path to boot.img here). Flash it to both A and B slots, then try flashing the TWRP IMG again.
Note: If you want Magisk, flash the Magisk ZIP after you install TWRP. Then flash the TWRP ZIP to install the recovery. Flashing the TWRP will unroot your phone.
BUT... This TWRP build seem to have issues. It does not remember settings and it is unable to read the internal storage /sdcard folder.
I suggest using an older build.
FanboyStudios said:
Which file did you download? ZIP or IMG?
If you downloaded the ZIP and tried to flash that with Fastboot, then you screwed up. You may need to download and flash a boot image. You can find this on the Razer Developer Portal, just Google search Razer Phone Stock ROM. You should keep a copy of the latest firmware anyway just in case their site goes down. Extract the zip and you'll want to flash "boot.img" using fastboot flash boot (path to boot.img here). Flash it to both A and B slots, then try flashing the TWRP IMG again.
Note: If you want Magisk, flash the Magisk ZIP after you install TWRP. Then flash the TWRP ZIP to install the recovery. Flashing the TWRP will unroot your phone.
BUT... This TWRP build seem to have issues. It does not remember settings and it is unable to read the internal storage /sdcard folder.
I suggest using an older build.
Click to expand...
Click to collapse
Thanks for the info! The problem I'm running into now is that fastboot no longer recognizes a device is connected (although it shows in device manager). I would have to resolve that before I can flash a boot image right?
Thanks again
jkimrey said:
Thanks for the info! The problem I'm running into now is that fastboot no longer recognizes a device is connected (although it shows in device manager). I would have to resolve that before I can flash a boot image right?
Thanks again
Click to expand...
Click to collapse
I'm actually seeing the device now when running "fastboot devices", but when I try to flash the razer image (or any other) I'm getting "fastboot: error: Couldn't parse partition size '0x'". Any suggestions with that? Thanks!
jkimrey said:
I'm actually seeing the device now when running "fastboot devices", but when I try to flash the razer image (or any other) I'm getting "fastboot: error: Couldn't parse partition size '0x'". Any suggestions with that? Thanks!
Click to expand...
Click to collapse
Try wiping user data and flashing the phone completely back to stock. That might be able to fix it, but if it doesn't you may have bricked your phone. If you did, someone else on here might be able to help you.
wubaolong said:
TWRP 3.5.0_9.0 for Razer PhoneWhats working:
Almost everything
Follow The Guide To Install
https://forum.xda-developers.com/t/twrp-for-razer-phone.3727333/
Big Thanks
PIPIPIG233666
Download
TWRP Website
Click to expand...
Click to collapse
This build seems to have some issues.
1. Internal Storage shows up empty with 0mb.
2. It does not remember the user's settings. You can check the box for "Never show this again during boot" (for allowing changes) and it'll show up again during the next boot.
FanboyStudios said:
This build seems to have some issues.
1. Internal Storage shows up empty with 0mb.
2. It does not remember the user's settings. You can check the box for "Never show this again during boot" (for allowing changes) and it'll show up again during the next boot.
Click to expand...
Click to collapse
This issues will only show up when data can't decrypt.
So I guess you're using Razer official Android 9 ROM, but this build doesn't support Razer official ROM data decrypt yet.
It only support 3rd-party ROM data decrypt such as LineageOS, Pixel Experience, exTHmUI, etc.
jkimrey said:
I'm actually seeing the device now when running "fastboot devices", but when I try to flash the razer image (or any other) I'm getting "fastboot: error: Couldn't parse partition size '0x'". Any suggestions with that? Thanks!
Click to expand...
Click to collapse
try this command
Code:
fastboot boot:raw twrp.img
wubaolong said:
This issues will only show up when data can't decrypt.
So I guess you're using Razer official Android 9 ROM, but this build doesn't support Razer official ROM data decrypt yet.
It only support 3rd-party ROM data decrypt such as LineageOS, Pixel Experience, exTHmUI, etc.
Click to expand...
Click to collapse
Yep, I'm on stock Razer Android 9.
wubaolong said:
This issues will only show up when data can't decrypt.
So I guess you're using Razer official Android 9 ROM, but this build doesn't support Razer official ROM data decrypt yet.
It only support 3rd-party ROM data decrypt such as LineageOS, Pixel Experience, exTHmUI, etc.
Click to expand...
Click to collapse
Which Factory build does this version of TWRP support?
What is a brick?If there is no usual way to recover your mobile, then it is called brick in my opinion. That means if you can't able to go to recovery and fastboot mode or the device is just blank with no sign of life.
When brick happens?It will happen because of locking bootloader with custom images or just because of Mediatek/Realme strange behaviour.
What we have to do if brick happens?Simply we have to flash stock firmware with Smart Phone Flash Tool(aka SPFlash Tool). With only SPFlash Tool we can't do anything, since we don't have permission for it. But with the advent of MTK-bypass, we can have full control over our device. If we don't have this MTK-bypass, then we have search for costly alternative's.
You can't flash only if your eMMC is damaged, which is the worst case because oppo phones are prone to eMMC failure.
Click to expand...
Click to collapse
Where to get firmware to flash?Download decrypted .ofp firmware from https://drive.google.com/file/d/1SOmRxix9_UtjOLLanXPYxf4YK1NrA_RW/view
Thanks to @bx2_nero for it.
What is the procedure for using MTK-bypass and SPFlashTool?MTK-bypass is a Python script and it needs different USB ways for working. So with these two in place, we can get our work done.
Linux UsersFor Linux we have to use FireISO or patched kernels for working of MTK-bypass.
Use the Linux guide by @bx2_nero at https://forum.xda-developers.com/t/...our-realme-6-6i-india-6s-linux-method.4251077
Windows UsersFor Windows we have to use libusb32 filter for MTK-bypass working.
Use the guide by @daeSundae at https://forum.xda-developers.com/t/...india-6s-using-spflash-tool-for-free.4222027/
MTK-bypass Official instructionsSee Github ReadMe at https://github.com/MTK-bypass/bypass_utility and XDA support thread at https://forum.xda-developers.com/t/mod-dev-mediatek-mtk-auth-bypass-sla-daa-utility.4232377/
Creditsxyzz / xyz`: GitHub | XDA
chaosmaster / k4y0z: GitHub | XDA
Dinolek: GitHub | XDA
References- https://forum.hovatek.com/thread-37957.html
- https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirement/
- https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/
- https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229683/
- https://forum.xda-developers.com/t/...ash-tool-authentication.4236881/post-84627359
MTKClient
After MTK-bypass got success, @viperbjk who is a reverse engineer came up with a FOSS replacement of SP Flash Tool.
MTKClient combines MTK-bypass and SP Flash Tool together and with many improvements and new features.
Ability to flash partitions without Scatter file
Ability to Readback partitions without specifying address and length
Ability to Format partitions without specifying address and length
Run multiple commands without reconnecting the device
Flash protected partitions(opporeserve2, special_preload, my_custom and cdt_engineering) with locked bootloader
Unlock bootloader without need of in-depth test/Deep testing app from Realme
GitHub - bkerler/mtkclient: MTK reverse engineering and flash tool
MTK reverse engineering and flash tool. Contribute to bkerler/mtkclient development by creating an account on GitHub.
www.github.com
Reserved
I need help, my C12 is stuck on fastboot mode. This happened after flashing a GSI using TWRP and flashing the image in the Super (System and Vendor) partition.
I tried rebooting to recovery mode by executing fastboot reboot recovery but it says that bootloader is not known.
I also tried to flash a GSI (taught it might fix the problem) using fastboot flash system system.img but it says that no partition named system exists.
Please suggest what I should do.
Bro, can you make a video about this? my realme c12 got hardbricked after I flashed ozip file from stock recovery while bootloader is unlocked. it got hardbricked when I reboot it after flashing ozip
DFM23 said:
Bro, can you make a video about this? my realme c12 got hardbricked after I flashed ozip file from stock recovery while bootloader is unlocked. it got hardbricked when I reboot it after flashing ozip
Click to expand...
Click to collapse
What is the present state of the device? Can you able to boot to fastboot mode?
HemanthJabalpuri said:
What is the present state of the device? Can you able to boot to fastboot mode?
Click to expand...
Click to collapse
it has no sign of life, cant go to recovery or fastboot. when I connect it to pc it goes connect and disconnected.
How can I reboot to recovery mode when in fastboot mode? The command fastboot reboot recovery is not working for me.
youcancallmekhen said:
How can I reboot to recovery mode when in fastboot mode? The command fastboot reboot recovery is not working for me.
Click to expand...
Click to collapse
Use latest platform tools
youcancallmekhen said:
How can I reboot to recovery mode when in fastboot mode? The command fastboot reboot recovery is not working for me.
Click to expand...
Click to collapse
HemanthJabalpuri said:
Use latest platform tools
Click to expand...
Click to collapse
Sir I've finally able to reboot to recovery. I've tried flashing the OZIP file for my model but after some time it says Installation failed. When I was still using custom recovery, I wasn't able to mount System and Vendor. My bootloader is also unlocked sir.
Should I lock my bootloader sir?
youcancallmekhen said:
Should I lock my bootloader sir?
Click to expand...
Click to collapse
Don't lock bootloader.
Download this https://drive.google.com/file/d/1jLdDz7M0G_KPDn4jXjTeuFnO1C-MFaBs/view (It is from A.87 UI 1.0 Stock ROM)
Extract above 7z file and flash ONLY super partition from it and TWRP from https://androidfilehost.com/?fid=7161016148664807816 with below commands
Code:
fastboot -w
fastboot flash super super.img
fastboot flash recovery TWRP.img
fastboot reboot recovery
Now enable 'Skip Treble Compatibility error' in TWRP settings and flash stock ROM .ozip in TWRP.
Thanks
HemanthJabalpuri said:
Don't lock bootloader.
Download this https://sourceforge.net/projects/realmec11/files/Fastboot-ROM/[email protected]/download
Extract above 7z file and flash ONLY super partition from it with below commands
Code:
fastboot -w
fastboot flash super super.img
fastboot flash recovery stock-recovery.img
fastboot reboot recovery
Now flash stock ROM .ozip in stock recovery.
Thanks
Click to expand...
Click to collapse
Oh my, thank you so much sir. You have no idea how much you are helping me sir! My parents will be so happy, and we won't waste money… Thank you so much sir…
I'll update you sir after doing these, thank you sir! ♥
HemanthJabalpuri said:
Don't lock bootloader.
Download this https://sourceforge.net/projects/realmec11/files/Fastboot-ROM/[email protected]/download
Extract above 7z file and flash ONLY super partition from it with below commands
Code:
fastboot -w
fastboot flash super super.img
fastboot flash recovery stock-recovery.img
fastboot reboot recovery
Now flash stock ROM .ozip in stock recovery.
Thanks
Click to expand...
Click to collapse
I don't have much data left today sir, so I will download this later. Thank you very much again sir, you're my hero!
DFM23 said:
it has no sign of life, cant go to recovery or fastboot. when I connect it to pc it goes connect and disconnected.
Click to expand...
Click to collapse
Follow the guide and you can get your mobile back to life.
Thanks
HemanthJabalpuri said:
Follow the guide and you can get your mobile back to life.
Thanks
Click to expand...
Click to collapse
thank you bro, Ill follow your guide then. btw does the RMX2185 firmware you provided works with realme c12? I look it up and saw that it was for realme c11
DFM23 said:
thank you bro, Ill follow your guide then. btw does the RMX2185 firmware you provided works with realme c12? I look it up and saw that it was for realme c11
Click to expand...
Click to collapse
Yes, both use same firmware.
I tried the guide but when I click download on sp flash tool it would stay in red bar for 1 min or more then message will appear saying STATUS_EXT_RAM_EXCEPTION. I have read a same comment here in xda about realme c12 I dont know if its only on realme c12.
Thanks for your works sir, you are super awesome!
I rooted My Device (Realme X2 Pro) by Magisk. And Since My Device Bootloader was unlocked I Unrooted/Uninstalled MAgisk.
While Locking Bootloader My Device is Stuck where It displays { The Current Image (boot/recovery) have been destroyed dand cannot boot. Please flash the correct Image or Contact Customer Service to fix it }
While Trying to ENter the Fast Boot Mode {By pressing Volume + - and Power Button} Its Unresponsive
It shows Realme Logo And chrging Display for a Instant
Do you Know any way around to fix my Problem?
Bhuprab said:
I rooted My Device (Realme X2 Pro) by Magisk. And Since My Device Bootloader was unlocked I Unrooted/Uninstalled MAgisk.
While Locking Bootloader My Device is Stuck where It displays { The Current Image (boot/recovery) have been destroyed dand cannot boot. Please flash the correct Image or Contact Customer Service to fix it }
While Trying to ENter the Fast Boot Mode {By pressing Volume + - and Power Button} Its Unresponsive
It shows Realme Logo And chrging Display for a Instant
Do you Know any way around to fix my Problem?
Click to expand...
Click to collapse
Since your device is Qualcomm, I don't know. In any device, we have to flash stock rom (or atleast the partitions that are modified) to get device in working state.
You may get better help at https://forum.xda-developers.com/f/realme-x2-pro-questions-answers.9439/
Thanks
341 redmi 10x 5G
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
https://unofficialtwrp.com/wp-content/uploads/2019/11/vbmeta.zip
1 flash miui recovery img
Go to fastboot and type fastboot flash recovery recovery1.img
After that hold power button and volume up button until you see a Chinese menu with three options first select option two after that option one and after that option two after wiping data you will see that three options again select option one and select option one then hold volume down button until you see fastboot
Type fastboot reboot fastboot
Wait
You will see fastbootd then rename corvus image to system.img
Then type
Fastboot flash system.img
Click power button
Wait
When you see corvus boot animation hold power button and volume down button until you see fastboot
Rename twrp image to recovery.img
Then type
Fastboot flash recovery recovery.img
Fastboot flash vbmeta vbmeta.img
Fastboot flash misc misc.bin
Fastboot boot recovery.img
In twrp flash permissiver 5 then reboot to system
Done.
If you want gapps download magisk app
Downloading Magisk App... | Magisk Manager
The download will automatically start in 5 seconds, please click here to access the download URL directly. If you are confused and want to know how to install the Magisk Manager on your phone you can click here.
magiskmanager.com
When it's download rename it to magisk.zip
Go to twrp
Flash it
Reboot to system rename it to magisk.apk and install it after that download this file
https://sourceforge.net/projects/magiskgapps/files/r/Core/MagiskGApps-core-V1.0.zip/download
After that go to magisk in modules go to install from storage and select zip you downloaded flash it with magisk after reboot you will see play store is added to your app drawer install Google apps you need from play store
https://sourceforge.net/projects/tipzbuilds/files/GSIs/CorvusROM/Alpha/20210329/Corvus_v15.0-RavenClaw-treble_arm64_ab-nonlite-29032021-Unofficial-1117.img.xz/download
While this technique certainly appears to have been researched. Running though the instructions has resulted in my device caught in a boot-loop. A pretty serious one too. I can no longer access the bootloader or recovery/
I fear the state my device is in is 'soft bricked/ I have no clue have to resolve this and without access to the bootloader I can't rollback anything.
Some friendly notes for Hsnmastoor:
You should re-format the post. Writing the instructions then at the end supply the links and file attachments in the order in which they should be run As it is, the instructions are confusing .
If anyone has any ideas how to correct the boot loop, plug me in
resirch26 said:
While this technique certainly appears to have been researched. Running though the instructions has resulted in my device caught in a boot-loop. A pretty serious one too. I can no longer access the bootloader or recovery/
I fear the state my device is in is 'soft bricked/ I have no clue have to resolve this and without access to the bootloader I can't rollback anything.
Some friendly notes for Hsnmastoor:
You should re-format the post. Writing the instructions then at the end supply the links and file attachments in the order in which they should be run As it is, the instructions are confusing .
If anyone has any ideas how to correct the boot loop, plug
Click to expand...
Click to collapse
You flashed permissive in twrp?
Hsnmastoor said:
You flashed permissive in twrp?
Click to expand...
Click to collapse
If not flash it
Hsnmastoor said:
If not flash it
Click to expand...
Click to collapse
sim card inactive
Hsnmastoor said:
You flashed permissive in twrp?
Click to expand...
Click to collapse
I can't flash anything. I no longer have access to the bootloader or recovery. Phone is stuck in a bootloop.
resirch26 said:
I can't flash anything. I no longer have access to the bootloader or recovery. Phone is stuck in a bootloop.
Click to expand...
Click to collapse
Hold power button and volume down for fastboot. Power with volume up for recovery
dothaison said:
sim card inactiv
Click to expand...
Click to collapse
Can you check IMEI?
Hsnmastoor said:
Bạn có thể kiểm tra IMEI không?
Click to expand...
Click to collapse
I can't test IMEI
Hsnmastoor said:
Can you check IMEI?
Click to expand...
Click to collapse
can you give me nvdata backup? . I have lost my IMEI.
Hsnmastoor said:
Can you check IMEI?
Click to expand...
Click to collapse
I have lost IMEI. Can you give me a backup nvram ? thank you.
dothaison said:
I have lost IMEI. Can you give me a backup nvram ? thank you.
Click to expand...
Click to collapse
Nvram.img
drive.google.com
Has anyone flashed this successfully?
any bugs? i flashed crdroid. it's too buggy
Hi everybody,
Still mad at myself for buying this phone (with MediaTek SOC) because of the lack of custom ROM support. Never had this issue before with any of my phones. If only i knew this before. The hardware of the phone is great, but the software makes it really frustrating to work with.
So i've tried a lot of things to either mod the original (Chinese) ROM so it's at least functional. And i have also tried multiple of these GSI ROM install methods. Everytime without succes.
I've tried your previous method with the 'GSI installer' and the one from this guide. Neither of them worked. (Boot loop). I have a feeling i run into trouble because (if i'm correct) the original ROM uses a 'super' partition and not a 'system' partition.
If i remember correctly the GSI installer couldn't continue because it couldn't find the system partition.
In this guide (for corvus) i figured i'd flash the system.img to my super partition. Of cource that doesn't work either. If only it was that simple.
Everytime it fails i have to flash back to a standard xiaomi ROM and start all over again. Because for some reason the TWRP backups also dont work for me.
So maybe i'm missing a step in the guide or i've already tried so much to mod my phone i've changed settings/partitions that shouldn't have been changed for this guide to work.
My bootloader is unlocked, i have/had TWRP 3.41 installed.
After a fail i flash back to the original ROM using Xiaomi ABD/Fastboot Tools (xiaomiABDFastbootTools.jar)
Any help would be appreciated!
I never had issue when I flashed the GSI from the crdroid guide did you make sure that you put the GSI installer.zip and the image file rename to system.img to the root internal storage??
Yes i did. It could also find the system.img file, but just wasn't able to flash it.
Can you tell mw what ROM you were flashing from?
Abducted23 said:
Yes i did. It could also find the system.img file, but just wasn't able to flash it.
Can you tell mw what ROM you were flashing from?
Click to expand...
Click to collapse
First I flashed crdroid. but did not like it. then I flashed blissrom using the same guide for crdroid. i just downloaded the rom posted on the guide. while for the bliss rom the arm64-bgN
Did you wipe data first before flashing?