Hey folks, I have a qi fast charging magnetic charger (linked below)
I tried sticking the ring to the outside of the case am using but after a few weeks of on/off the magnet it came off. I also had the ring under the case but it's too thick to stick reliably.
I'm trying to find an ultra thin case that won't look warped when I stick the ring under the case, or maybe even has a cut out inside the case for the plates you can get or the ring, and is thin enough to stick well on the charger
Suggestions would be awesome!!
Charger: https://www.amazon.com/dp/B0771JGBM3/ref=cm_sw_r_cp_apa_cBGbCb4WV8J02
Case: https://www.amazon.com/dp/B07FLXM5KJ/ref=cm_sw_r_cp_apa_CUGbCbFX6CMGW
Sent from my SM-N960U using Tapatalk
I have that same case and I have a metal place stuck to the inside of it for my magnetic car mount. I can't see or feel the plate. I'm not sure if my plate is the same thickness as your ring.
100% get the Rhino Shield Bumper Case. Amazing drop protection (I've dropped many times on all sides, including front and back, with no concern) and keeps a super thin minimal design. Back is completely open. Pairs perfectly with dbrand skins on the back!
tgtoys said:
100% get the Rhino Shield Bumper Case. Amazing drop protection (I've dropped many times on all sides, including front and back, with no concern) and keeps a super thin minimal design. Back is completely open. Pairs perfectly with dbrand skins on the back!
Click to expand...
Click to collapse
Where are you gonna put your metal ring???
I used to have a set of pitaka accessories for the note 8 and I loved it. Not available for note 9 yet though..
Sent from my SM-N960W using Tapatalk
but where should you put the metal plate or the ring for both the magnet and the wireless charger to work?
Im using this. loving it
https://www.ebay.com/i/123309263869?chn=ps
Speck Presidio Grip is awesome
Sent from my SM-N960F using Tapatalk
I'm loving the Spigen case!!
I've been using OtterBox for my last two notes. I really like the Symmetry model on the Note 9. Great protection and not too bulky.
I'm using the Armadillotek case and it's great. Feels very comfy and offers drop support and protection.
I'm using Spigen Neo Hybrid + Liquid Crystal Clear, spigen cases are awesome!
cereal86 said:
I'm using Spigen Neo Hybrid + Liquid Crystal Clear, spigen cases are awesome!
Click to expand...
Click to collapse
Is wireless charging working with the Spigen cases? On reviews of Amazon they say not. Is this true?
Accordingly with this video, is OK
Official Samsung cases.
Well... I'm using the Samsung clear case for my Note 9. It's very thin, but also a very tight fit so I'm not sure how it'll fit with that ring. Also you'd obviously see the ring.
Does that ring not scratch the back glass?
I will recommend Speck to anyone with a Note 9. Presidio grip is amazing
Sent from my ONEPLUS A6003 using Tapatalk
I use Tech21 cases. They're very good.
dsg2003 said:
Is wireless charging working with the Spigen cases? On reviews of Amazon they say not. Is this true?
Click to expand...
Click to collapse
I can answer this question: yes. I tried a Spigen case yesterday and it worked well.
I bought this, it is on sale so, and I love the wood back plate, bonus you can attack lenses, still hasnt arrived so...
https://www.shopmoment.com/shop/photo-case-galaxy/note-9-walnut
When i bought Note9 i knew that i must buy some tough case for it, this is most expensive phone that i`ve got so far and protection before look. So i was wondering about lovemei or lovmei cases, you know, 6 screws, big metal case that you can use also as self-defence, car lift, surfing, scateboard (just attach wheels ) and for space shuttle heat cover. But you know, NFC payments, and wireless charger - this is very important for me. So i manage to find one case that costs lot for me, and i bought it with little bit of fear, but what i`ve got... I`ve bought SUPCASE CLAYCO XENON. It covers both sides of phone, it is little bit tricky to mount but effect is brilliant! Phone looks very good in it, it is not as bulky as i thought it would be, first impressions was not so good because of stylus experience at screen. When i try to work with stylus i felt resistance between tip of stylus and screen but after few hour of phone usage everything came to normal. I think that screen cover was just extremely clean and as soon as i pick up few calls surface was back to normal experience. So - if anyone want to have best possible protection and want their phone to still look good and not so bulky this is answer.
Related
I need to get my self a case but a good durable case any suggestions ? Give me names and pictures of cases ? Thanks
Sent from my SGH-M919 using Tapatalk 2
yobebo2x said:
I need to get my self a case but a good durable case any suggestions ? Give me names and pictures of cases ? Thanks
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Otterbox commuter, i love it:
http://www.amazon.com/OtterBox-77-27604-Commuter-Series-Samsung/dp/B00C96CGN2
yobebo2x said:
I need to get my self a case but a good durable case any suggestions ? Give me names and pictures of cases ? Thanks
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Personally for protection and looks I like the Spigen Slim Armor the best. It's not very bulky, but still offers good protection. For good reviews and pictures take a look at the posts around this section. There are plenty of great reviews.
Ballistic aspira. Not too thick, but great protection. Love the colors too
sent from my stock me7 galaxy s4
I'm really liking my UAG Navigator in white:
http://forum.xda-developers.com/showthread.php?p=41548103
Spigen Neo Hybrid, Dante Red looks pretty sweet. Gets a little distorted from a wirelesss charging pad, but otherwise very nice looking.
I personally use 3 cases, the official Samsung Protective Cover+, Spigen Neo Hybrid and UAG Navigator! All 3 are slim protective cases!
Otterbox commuter has protected my S4 from several drops ranging from 3-5 feet onto various surfaces including concrete! Couldn't recommend anything else.
Really love my Spigen Slim Armor Cases. They are the best looking case I have ever used. I will probably get an Otterbox Commuter or Defender for Outdoor activities. I have used them on other phones and really liked them.
it depends if you want protective case and don't care if the phone become bulky or want non bulky phone and good protection.for the first option i recommend otterbox commuter. for the second option i recommend uag .
I personally prefer the otterbox as well.
Sent from my GT-I9505 using XDA Premium 4 mobile app
If you like not being able to plug in headphones/chargers with the case on, go for the Spigen Neo Hybrid.
If you want the same protection, an OEM look, and wider ports that allow for plugging in with the case on, go for the OEM Samsung S4 Bumper Case.
You can find both (by copying & pasting the names I wrote) on Amazon.
I would wholeheartedly recommend the UAG case. It's the first case I look for when I buy a new phone.
To me, it's the perfect case.
Sent from my GT-I9505 using Tapatalk 4
I'm using the otterbox the commuter series, and liking it. Not too bulky.
So my Seidio Convert case for the S3 fits the S4 mostly.
You will have to cut the volume controls a bit if you want to use the inner plastic shell but I just skipped on it.
The rubber shell and exoskeleton together are enough to keep the phone in the case - even if a bit of wiggle is there - and you can use the volume and power buttons, the IR blaster is exposed and works well.
The headphones jack doesn't line up, but the power and camera do - so it'll do for a few days until I get this in:
http://www.amazon.com/Seidio-CSWSSG...TF8&qid=1379369652&sr=8-11&keywords=seidio+s4
I used to go for otterbox cases, but after getting my first Seidio case I will never, ever use an otterbox again.
The seidio convert case is far and away superior to the defender case from otterbox - the convert case has an inner plastic shell that slides together, instead of clipping together, and then the rubber shell goes over with a second plastic exoskeleton that keeps the rubber in place.
Not only that, but where the defender is basically a brick-type shape, the convert case is contoured and feels nice in your hand with it's rounded edges and ribbed sides.
They are about the same size when all is said and done, so i'd rather hold a convert then a defender.
That waterproof case is going to be the best decision I ever made for this device, I am sure of it.
Blue6IX said:
So my Seidio Convert case for the S3 fits the S4 mostly.
You will have to cut the volume controls a bit if you want to use the inner plastic shell but I just skipped on it.
The rubber shell and exoskeleton together are enough to keep the phone in the case - even if a bit of wiggle is there - and you can use the volume and power buttons, the IR blaster is exposed and works well.
The headphones jack doesn't line up, but the power and camera do - so it'll do for a few days until I get this in:
http://www.amazon.com/Seidio-CSWSSG...TF8&qid=1379369652&sr=8-11&keywords=seidio+s4
I used to go for otterbox cases, but after getting my first Seidio case I will never, ever use an otterbox again.
The seidio convert case is far and away superior to the defender case from otterbox - the convert case has an inner plastic shell that slides together, instead of clipping together, and then the rubber shell goes over with a second plastic exoskeleton that keeps the rubber in place.
Not only that, but where the defender is basically a brick-type shape, the convert case is contoured and feels nice in your hand with it's rounded edges and ribbed sides.
They are about the same size when all is said and done, so i'd rather hold a convert then a defender.
That waterproof case is going to be the best decision I ever made for this device, I am sure of it.
Click to expand...
Click to collapse
I hate to admit it but the new Otterbox Defender is actually pretty nice. It seems slimmer than previous models and feels good in my hands.
I also like the color options now available. I found replacement frames and rubber sleeves on Amazon for like $5 each so I can mix up the colors. I have the Samsung wireless charging back on it which fits in the case and charges fine. The raised edges don't bother me like they did in previous models where they felt like they impeded my typing. I have to say I'm impressed with overall improvements to the case. I tried the Convert but prefer this. On top of all that, this like Seidio are quality built cases so you know proximity and gps etc...all work fine.
I have probably about 15 cases from thin to bumpers to bulky but this actually works pretty well for me. I've gotta calm down on the case venture!!! The Love Mei large case is on a shelf after the issues I experienced with it.
I need to have a phone case garage sale.
Best
case
EVER!
http://www.aliexpress.com/item/1PCS...rtable-Power-Bank-Charger-Case/905708120.html
I got my Spigen Tough Armor for the s5 on Tuesday, and it's by far my favorite case I've owned for any of my devices. Definitely prefer this to Lifeproof and Otterbox overall. You can find it on Amazon here.
It's slim, the buttons click easily, and the heart rate monitor and fingerprint reader work like a charm. Only issue is until you get used to it it is a bit difficult to get the charging cover open, but after a day or two of doing it it's pretty easy.
Says it's compatible with Spigen's glass screen protectors as well, I'll be getting one soon.
Thanks for the quick review and pictures!
Do you feel this case adds a lot of bulk to the phone?
According to the product page, the case adds approximately half a centimeter to every dimension. In the hand, it doesn't feel like your phone is any thicker due to the beveled edges.
I just received my Gunmetal Tough Armor case today & there's a good chance I'm going to like it more than the Otterbox I had on my previous phone.
I hate the fact that you can see the plastic bezel on most of the new cases for the S5. That's what I'm trying to cover up with the case!
How secure do you feel holding it? I was very surprised that the case felt very slippery with the hard plastic shell. Debating returning it or trying to spray plastidip to give it some grip.
Also ordered this case can't wait for it to arrive
Sent from my SM-G900F using XDA Premium 4 mobile app
just ordered an Electric blue one since thats the color phone i wanted but couldn't get. I originally bought a case from best buy which I'll keep till this one comes but I don't like the fact that it slides on from the top and bottom, those cases always F' up screen protectors...
dawest said:
I got my Spigen Tough Armor for the s5 on Tuesday, and it's by far my favorite case I've owned for any of my devices. Definitely prefer this to Lifeproof and Otterbox overall. You can find it on Amazon here.
It's slim, the buttons click easily, and the heart rate monitor and fingerprint reader work like a charm. Only issue is until you get used to it it is a bit difficult to get the charging cover open, but after a day or two of doing it it's pretty easy.
Says it's compatible with Spigen's glass screen protectors as well, I'll be getting one soon.
Click to expand...
Click to collapse
how are you using the fingerprint sensor? which finger and position?
I wonder if it'll work with the wireless charging back cover....
For the ones who have the case, does the bottom plastic part (right below the home button) move around when using the fingerprint features? I have the spigen tpu case and the bottom part below the home button is too flexible.
I have a tough armour and yes it is. It's TPU and a bit thin so does "flex" when you use the finger print reader.
Sent from my SM-G900F using Tapatalk
Just got this case today. LOVE the case. I feels comfortable. and im sure if i dropped it, it'd protect it just fine. Only problem, if you have slight bigger fingers, the heart monitor can be a bit difficult to use. But i'd still recommend this case to anyone. A must have
I got the Slim Tough in electric blue, love it. I thought the Tough looked slippery on the back, so I got the Slim Tough. I do like the Slim Tough look more though.
It was tough trying the Spigen case as I have used the Case-Mate tough case for my last three phones and loved it, but no regrets now.
Also works well with the Spigen Glas.tr screen protector.
dmanzo425 said:
Just got this case today. LOVE the case. I feels comfortable. and im sure if i dropped it, it'd protect it just fine. Only problem, if you have slight bigger fingers, the heart monitor can be a bit difficult to use. But i'd still recommend this case to anyone. A must have
Click to expand...
Click to collapse
SO i thought the heart monitor was hard to reach, turns out i was doing it wrong. As long as you just place your finder the spot, it works just fine. So this case is a 5 out of 5
I was looking at this case and the Luvvitt Ultra Armor. Bought the ultra armor. Very happy with it for $13. Either looks like an awesome choice.
anyone have a comparison of the tough armor vs. slim armor?? I like both and not sure which one to get.
jumbeemann said:
anyone have a comparison of the tough armor vs. slim armor?? I like both and not sure which one to get.
Click to expand...
Click to collapse
I have both of them and much prefer the tough armor.
Forgive me, but my slim armor is at home, so i can't offer pictures until later. I disliked the way the slim armor gripped the front of the phone around the edges of the screen. The left and right sides encroached on the face of the phone about a mm more than the top/bottom. This meant that the bit of metal around the edge only showed at the top/bottom. It drove me batty. I like the feel of the tough armor more as well.
Sent from my SM-G900P using Tapatalk
Use coupon code BIGTHING2014 for %15 discount on S5 products
f
I bought this case before the release haven't got it yet, Looks nice. I got the incipio tough armor case in store on release day, kept the order for the spigen case in case its any better, but it sure does look nicer.
Got mine yesterday.
It's kind of nice yet I thing the power and sound button are now very hard to press.
Also it become complicated to open the usb cover (doable with a pen though)
linkinx64 said:
Use coupon code BIGTHING2014 for %15 discount on S5 products
Click to expand...
Click to collapse
Is this code for Amazon?
I've had a few cases so far. Ringke Flex and the Spigen Neo Hybrid.
I had the Spigen the longest, for maybe a month. It looks great, but the square design gets to be very uncomfortable and hard to reach areas of the phone while in use. The buttons are incredibly responsive. Which is a plus for casual use, not a plus when you don't want them to be as responsive, either in pocket or using as a camera. The Ringke Flex I had for a week. The case is a very nice fit, but the buttons are almost rock hard to push, the back is slippery due to an odd design, and the case still adds an extended bulk which is kind of strange.
My prior phone was a Galaxy Nexus, and had a Diztronic case after following up on great Amazon reviews. For whatever reason, I thought I would get something more visually appealing and fancy for this device.
http://www.amazon.com/gp/product/B00JQMDGG8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
In the end, I just went back to where I started. Unless you are one of those people who enjoy having a very bulky case (Lifeproof/Otter) for max protection, the Diztronic TPU case is a very nice slim fit, has the best matte finish I've seen for people with sweaty hands or just enjoy a better grip, and the phone physically still looks very appealing. The buttons are also the most tactile and responsive I've seen on the cases to date. Anyone looking for something minimalistic, but has some protection which is not over the top, you can do far worse then spending $10 on this case. Cannot recommend enough.
*Unfortunately tried to take photos, but my best camera is the one on the S5!
you think it would fit the OEM wireless back cover?
Barakfel said:
you think it would fit the OEM wireless back cover?
Click to expand...
Click to collapse
Technically, it does not fit the OEM wireless cover. However, I used a heat gun to stretch mine out, and the fit is OK, though not perfect. You can still see a little bit of the silver on the sides of the phone. The volume and power buttons work fine. I've been using the case now for over a week and there are no functionality issues.
Not familiar with the other backing myself. Like the other poster mentioned, it's a nice tight fit, so some finagling may be required to get it to work.
sanjurotsubaki said:
I've had a few cases so far. Ringke Flex and the Spigen Neo Hybrid.
I had the Spigen the longest, for maybe a month. It looks great, but the square design gets to be very uncomfortable and hard to reach areas of the phone while in use. The buttons are incredibly responsive. Which is a plus for casual use, not a plus when you don't want them to be as responsive, either in pocket or using as a camera. The Ringke Flex I had for a week. The case is a very nice fit, but the buttons are almost rock hard to push, the back is slippery due to an odd design, and the case still adds an extended bulk which is kind of strange.
My prior phone was a Galaxy Nexus, and had a Diztronic case after following up on great Amazon reviews. For whatever reason, I thought I would get something more visually appealing and fancy for this device.
http://www.amazon.com/gp/product/B00JQMDGG8/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
In the end, I just went back to where I started. Unless you are one of those people who enjoy having a very bulky case (Lifeproof/Otter) for max protection, the Diztronic TPU case is a very nice slim fit, has the best matte finish I've seen for people with sweaty hands or just enjoy a better grip, and the phone physically still looks very appealing. The buttons are also the most tactile and responsive I've seen on the cases to date. Anyone looking for something minimalistic, but has some protection which is not over the top, you can do far worse then spending $10 on this case. Cannot recommend enough.
*Unfortunately tried to take photos, but my best camera is the one on the S5!
Click to expand...
Click to collapse
I agree. I had the Diztronic on my Nexus and the S5 case is even nicer. If you want something that will give a measure of protection without putting your phone in a hermetically sealed pickle jar, Diztronic is the answer.
Thanks guys! I don't come on XDA as often as I used to, but I was browsing the accessory thread this morning to do some research as to the demand of a case that will work with the wireless charging door. Nice start to my morning to find this thread!
It sounds like quite a few people want a case that will work with the official samsung charging door and their S5. I didn't make it before as my thinking was can't they just put a Qi receiver pad under their stock door and use any case they want? I guess the problem with that is it won't seal tight enough to keep water out. So a case that fits the wireless door is needed.
I'll think it over today. But I think there is a good chance well make a new case specifically for the wireless charging door. I'll post an update on our website if we do.
I would buy one. Already own diztronic case for s5 and s2. I think many of us would prefer a matte front (same finish as the back). The shiny black plastic all consumer electronic manufacturers are using looks cheap with reflections, scratches, and fingerprints.
Samsung should have included wireless charging in the s5 along with a magnetic charging port like the Nexus 10 pogo, and front speakers. Instead we have a worthless heart rate sensor.
We could try a matte front, I just don't think it looks as nice against the glossy screen. In my opinion the glossy lip blends better next to the display, almost like you don't even have a case on. Unlike our competitors that have recently started offering similar style cases as ours, only our front lip is glossy. Their cases the entire top half is glossy, similar to our old S2 case.
The S5 wireless charging door case could be a good model to test full matte on though.
Barakfel said:
you think it would fit the OEM wireless back cover?
Click to expand...
Click to collapse
you could always get this it wirelessly charges through the case just fine using it on my S5 with the neo hybrid case just fine. as for keeping the water protection it seems to work just fine put my phone in the fishtank for 25 mins with no issues to test it.
http://www.amazon.com/gp/product/B00F3J2KJW/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Does the diztronic case mess up screen protectors? Im using a tempered glass right now.
heshamtecom said:
With all respect, I belive Obliq Xtreme Pro is the best Galaxy S5 TPU case, have a look and let me know http://www.galaxy-s5-cases.com/
Click to expand...
Click to collapse
That's not a TPU case. It contains TPU on the inside, buts it's a dual layer two piece case with a polycarbonate shell. it's basically exactly the same as our Reactor case for the GS5. It's a fine case, but personally I don't like dual layer cases on my phone. Too bulky. According to that page you linked it weighs 5 ounces! That's a tank compared to a 21g TPU case. It's a totally different class of product then a traditional single layer TPU case. It also does appear to "borrow" heavily from UAGs design. I really hate it when companies do that, but it is what it is, happens in every industry.
---------- Post added at 08:24 AM ---------- Previous post was at 08:09 AM ----------
theo_yuxda said:
Does the diztronic case mess up screen protectors? Im using a tempered glass right now.
Click to expand...
Click to collapse
I prefer to think of it as the screen protectors not being compatible with cases I think it's far more common for someone to only have a case than to only have a screen protector. The vast majority of people using screen protectors will also use a case. However many use a case but no screen protector. Given that, companies that make screen protectors should do a better job making sure their products can be used with a case.
To answer your question (somewhat) , I used a tempered glass SP on my old S4 and one of our cases. It was a bit of a stretch, but after a day or two it fit well enough. I haven't tested it on an S5 however. We are going to start adding a small amount of depth to our cases in the future, likely 0.25mm to better accommodate thick screen protectors. We have to be careful that the case still fits well for those that don't use screen protectors. The new OnePlus One is the first case well be testing this on.
Ive had this case for my S3. Wonderful case and great price.
Unfortunately, they dont ship to the Netherlands. I really want this one
Sent from my SM-G900F using XDA Premium 4 mobile app
I'm getting a Note 4 here soon and wanted some recommendations on accessories. Trying to keep things under $100 shipped for everything. Mainly the two things I need is a good dock and case, as well as a fitness arm band. I'm an Uber driver and the app does not rotate into landscpae mode so something that I can use in portrait or landscape is a pluss but the biggest thing is dead reliable and easy to remove and compatible with the case. As far as the case goes well I don't want anything ridiculous bulky but definitely something that will protect the phone from minor wear and tear and prevent damage in the event of drops. A waterproof case is not a requirement unless said case maintains hte profile of not being too bulky.
I have more portable battery chargers, usb cables, and chargers than I know what to do with. So I am good on those
For cases that provide good protection yet keep it not too bulky check out the seidio solez pro which is a hybrid case and also includes a kickstand, also my favorite is the speck candy shell grip case provides excellent protection and gruo while being pretty slim. I hear the Samsung OEM protective cover is good too. As far as docks I use the iottie one touch dock.
gcforreal said:
For cases that provide good protection yet keep it not too bulky check out the seidio solez pro which is a hybrid case and also includes a kickstand, also my favorite is the speck candy shell grip case provides excellent protection and gruo while being pretty slim. I hear the Samsung OEM protective cover is good too. As far as docks I use the iottie one touch dock.
Click to expand...
Click to collapse
Thanks. I was looking into the iOttie Easy One TOuch 2. I notice the bottom support bracket is adjustable. Can this be adjusted to allow me to have access ot the charging port and S Pen while mounted?
I have the slightly older version my charging Port is fully accessible while docked but the s pen is not, the newer version may allow that though.
i had the UAG case on mine. Offers good protection and isnt to bulky, but it does have a very tight fit
ATOMICxTomato said:
i had the UAG case on mine. Offers good protection and isnt to bulky, but it does have a very tight fit
Click to expand...
Click to collapse
Those look pretty nice. RIght now im looking into the Seidio Dilex and the Ballistic Tough Jacket Maxx. The Ballistic is somewhat on the bulkier side but it comes with screen protection and I've owned Ballistic cases before and they are ROCK solid.
I went ahead and ordered an iOttie One Touch 2
get the iblason armorbox and the samsung oem qi back. an itian wireless charger + a 3 coil charger for the desktop and some 3m double sided tape for fixing the itian in your car and you should be good.
gravatrax1 said:
Those look pretty nice. RIght now im looking into the Seidio Dilex and the Ballistic Tough Jacket Maxx. The Ballistic is somewhat on the bulkier side but it comes with screen protection and I've owned Ballistic cases before and they are ROCK solid.
I went ahead and ordered an iOttie One Touch 2
Click to expand...
Click to collapse
Just got my iOttie in the mail today, looking forward to trying it out in the car tomorrow. Good choice! (I hope lol)
zurkx said:
get the iblason armorbox and the samsung oem qi back. an itian wireless charger + a 3 coil charger for the desktop and some 3m double sided tape for fixing the itian in your car and you should be good.
Click to expand...
Click to collapse
Ehhh I think I'm good on all that. I'm not big on wireless chargers
I tried the Tech 21 and now have the Samsung Protective cover.
The Samsung Protective Cover is FANTASTIC. And the same night I got the phone, Samsung sent me a 50% off any item in their store under $50 so I bought the case with it. Its slim, fits well, It almost looks like the Note 4 was made as a rugged phone and doesnt have a case on it at all. I would rate it a 10 out of 10. the tech 21 I woudl rate a 4 out of 10, I knew when I was putting it on I didnt like it.
gravatrax1 said:
Thanks. I was looking into the iOttie Easy One TOuch 2. I notice the bottom support bracket is adjustable. Can this be adjusted to allow me to have access ot the charging port and S Pen while mounted?
Click to expand...
Click to collapse
You will have access to the charging port but the S-pen isn't that easy to get in and out. Here are some pics I recently took of it http://imgur.com/a/GP92Y
The s-pen has to be pulled on a little bit so it makes it difficult to try and wiggle it out while driving. It's not impossible though.
racer83l said:
The Samsung Protective Cover is FANTASTIC.
Click to expand...
Click to collapse
You know, I agree with this. I got the blue one.
Otterbox Defender.. THE best case for the Note4 as far as protection. I've had one on mine since day 1, and have dropped it several times and my phone is still perfect. JMHO..
Sent from my SM-N910P using XDA Free mobile app
Dennelly said:
You will have access to the charging port but the S-pen isn't that easy to get in and out. Here are some pics I recently took of it http://imgur.com/a/GP92Y
The s-pen has to be pulled on a little bit so it makes it difficult to try and wiggle it out while driving. It's not impossible though.
Click to expand...
Click to collapse
Hmmm, well I try hard not to play with my phone while I am driving so that's a non issue for me in itself.
schlepprock said:
Otterbox Defender.. THE best case for the Note4 as far as protection. I've had one on mine since day 1, and have dropped it several times and my phone is still perfect. JMHO..
Sent from my SM-N910P using XDA Free mobile app
Click to expand...
Click to collapse
I had a look at it, it looks solid like any other otterbox case but It looks like itd be just too bulky for my tastes.
Hi,
I highly recomend you the original Samsung Vehicle Dock.
I got it since December and I love it, I don't know how I could live without it!!
Greetings.
Hey All
Got it today, what an amazing device!! Still getting used to the height lol. Is everyone using a case or without? I'm using a spigen liquid crystal atm but seems to attract a lot of dust
Sent from my SM-G955F using Tapatalk
Case
I would suggest a case, because accidents happen and yo want to make sure that you device doesn't damage.
Whenever I buy a phone, first things I do is buy a case and screen protector.
Guitarfreak26 said:
Hey All
Got it today, what an amazing device!! Still getting used to the height lol. Is everyone using a case or without? I'm using a spigen liquid crystal atm but seems to attract a lot of dust
Sent from my SM-G955F using Tapatalk
Click to expand...
Click to collapse
Using no case at the moment while at home because the phone is too beautiful to cover! But when I go to work I think I'll use a case just to be safe.
It is stunning!!
Sent from my SM-G955F using Tapatalk
Both! naked at home and dressed up case to go!
Leaving the plastic on mine until I pick up a case tonight.
SOOO jealous and anxious .. not getting mine until tomorrow
I always gotta have a case. Just dont want anything to happen to the phone.
I normally get think silicone cases. And thats what i got the s8+. Its nice, thin and has a matt finish for grip.
I did however order a rhinoshield crash bumper. But its hasnt been ship yet.
Case I picked up a spigen case a while ago my phone gets here today
I like to use a magnetic mount in the car, so I had to get a thin case off of amazon to hold the metal disc. I normally like dbrand skins, but without being able to hide the disc under the battery cover like I did on the LG V20, I'm forced into using a case. It doesn't add too much thickness, so I'm ok with it.
I'm using it with no case until my case gets here on Monday. It's giving me anxiety lol
i bought 4 cases: 2 black and 2 clear and frankly none of them are right. the thicker ones get in the way of the edge screen while the clear ones show fingerprints nearly as bad as the beautiful device itself. got to find the right case!
I'm using only a skin. Bit risky but I want to enjoy the feel of this beauty.
Those of you going naked be very careful with it. My Note 7 got scratched up fairly quickly on the back. Gorilla Glass 5 is more shatter resistant but easier to scratch.
chazglenn3 said:
Those of you going naked be very careful with it. My Note 7 got scratched up fairly quickly on the back. Gorilla Glass 5 is more shatter resistant but easier to scratch.
Click to expand...
Click to collapse
Yea I saw a Youtube video saying their S8 already got scratched, too.
I'm rockin a Ringke SLIM case. Extra thin with a grippy rubber-type coating. The case covers all the sides but doesn't get in the way of edge touches. Just wished they made the USB-C hole fitted to the port instead of a big square opening.
digitaldodd said:
I like to use a magnetic mount in the car, so I had to get a thin case off of amazon to hold the metal disc. I normally like dbrand skins, but without being able to hide the disc under the battery cover like I did on the LG V20, I'm forced into using a case. It doesn't add too much thickness, so I'm ok with it.
Click to expand...
Click to collapse
You don't need a magnetic strip for this phone. the wireless charger equipment in the phone is magnetic, so no need.
It was same in my S7. I have a magnetic mount and it sticks to the magnet without anything.
chazglenn3 said:
Those of you going naked be very careful with it. My Note 7 got scratched up fairly quickly on the back. Gorilla Glass 5 is more shatter resistant but easier to scratch.
Click to expand...
Click to collapse
Crazy how society has devolved into the fear of micro-scratches on a phone used everyday.
Scratches will happen, the only question is will you let it bug you?
100% case no question about it. This phone looks sexy, but it a huge fingerprint magnet, making it looking ugly. I went with the Otterbox Strada, it feels so good in the hand to unlcok the phone with fingerprint scanner & flip the cover open. Or just to flip the cover around back and use it with out. Also protects the screen from minor scratches that could happen in pocket, which is what i really love about it, no need for tempered glass.
digitaldodd said:
I like to use a magnetic mount in the car, so I had to get a thin case off of amazon to hold the metal disc. I normally like dbrand skins, but without being able to hide the disc under the battery cover like I did on the LG V20, I'm forced into using a case. It doesn't add too much thickness, so I'm ok with it.
Click to expand...
Click to collapse
I'm in a similar situation. I use a magnetic mount in the car, but on my current G3, I have the metal plate between the layers of a Spigen Slim-Armor case. I want to do the same when I get my S8+ later today, but I also want to be able to easily utilize the wireless charging feature. What I settled on is the Spigen Slim-Armor CS case with the credit card holder on the back. Slightly thicker, but I can stick the metal plate to the back of the door that slides open to cover the cards. Close it to use the magnet mount in the car, slide it open to charge wirelessly. We'll see this weekend if it will work like that or not.
Oh, and the CS version of the case was less than 1/2 the price of the standard slim-armor. ($16 vs $35).
No case, every. It's like buying a new car and wrapping it up in cotton wool!
Sent from my SM-G955F using Tapatalk