Hi. A friend of mine has Honor 8 (FRD-L09) and one day it just suddenly died during usage. And I mean completely died. It didn't even show up as an usb device. I replaced the battery and the usb port and now I can see the device listed when I use command lsusb on my Ubuntu laptop. But that's all. The phone won't charge, won't turn on, won't boot into fastboot... Nothing. The phone was not rooted and adb was not enabled before the phone died. Is there anything I can do to recover the files from the device or to make it boot again?
Related
Hello, can you help me?
I am having a problem with my huawei honor 3c, I think it brick.
In brief, my phone won't start up no matter what I do, the display is completely shut off, the pc doesn't recognize the phone and it only flashes a red led for one second as soon as it's connected to the pc (without the battery), then nothing more happens.
I reinstalled the drivers and changed the usb cable but it's still not working.
it all happened when I was flashing a ROM using the sp flashtool, it was working fine but as soon as I disconnected the phone and reconnected it back to the computer, it didn't work anymore.
may someone please help?
Hello, for some reason i cannot get my phone into fastboot. The main problem is that my PC with Win10 x64 does not find any device when i plug the USB cable in.
I have read in many forums that i have to discharge the battery so that the red LED blinks and then plug the USB. This is the case, but no device is found by windows...
any tips on how to get the qualcomm thing work so i can use MiFlash to flash an official ROM?
Almost impossible to loose fastboot, what did you do? Have you done this before? Are you sure windows cant find your device? I had a problem that for a few hours after brick my phone, windows didnt recognize my device as Qualcomm device... windows recognized my device as "something I cant remember", and suddenly after I connected my device to wall charger for a few minutes, suddenly apear in my computer as qualcomm device.
probably a dead battery or broquen usb port. try another cable
Hi. I own a huawei y360-U31 model. Recently, i powered down the phone to install my memory card. The phone then completely refused to boot up, no display is shown and it doesnt power on at all. I had not experienced any problem within the 7months of owning that phone and this was a first. The device was already rooted with King Root, and had been using it without any problems. The phone is detected by my pc, as an MediaTek Usb port android (not as huawei). Are there any suggestions as to how i can recover my phone?
Hi. My mi5 3/64 variant was functioning great till tomorrow... suddenly i locked the phone and it didn't unlocked....i tried several times to boot up the device. I put it on charge and No Charging LED was showing. No lights. No fastboot mode, No recovery mode, No boot nothing. I am helpless now. Wasted 300$ on this phone 4 months back.Only black screen is what i am watching now. Please help me. Device is not even heating up. If i plug in the device to the pc it says Unrecognized usb device(Unknown Usb Device). I made a EDL cable. Yet it didn't recognize the USB device. What to do now.NB: Bootloader was unlocked and was in official AEX ROM
Brief: Having issues with USB in Windows 11 and my Le2115. Right now, Windows sees the device, and adb devices returns a serial number (with debugging on); however, the phone is not seeing that it is plugged in at all. It is not charging, no transfer options, nothing.
History: So, it all starting sometime after trying to get rid of OS13 and returning to stock, I bricked my phone pretty good. Ended up using MSM and loaded an india version, went back to a Global version, lost touchscreen after updating to v12, used MSM to go back to a different rom (OS-11.2.4.4.LE25AA... don't remember the previous ones) and then updated to C65.
After rebooting to C65, I plugged by phone it that I got no response from either Windows 11 or from my phone. Swapped cables, swapped ports, rebooting both devices, uninstalled Oneplus drivers, rebooted and reinstalled them... nothing worked. Plugged in my LG V60 and Windows would see it fine. Put the phone into Recovery and tested with fastboot devices and the phone showed up fine. Reset the phone to factory... no change; Window would not need see it.
Reflashed the phone to the OS-11.2.4.4.LE25AA ROM via MSM. Booted up the first time and Windows saw the phone just fine and the phone gave me the connection type notification and began charging. Successfully tested file transfer and adb devices. Ran the first update... tested it and everything worked fine. Turned on Debugging to make sure that adb and fastboot worked... they did. Ran the C48 OTA update.
After rebooting, when I plugged in the USB-C Warp cable, Windows defects the phone as an MTP device (sm8350-mtp in device manager), but the phone did not see that it was plugged in (no charging, no notification). Turning on Default USB Configuration allows me to change it to other modes when plugging it in (File Transfer will even let me browse the phone via Explorer), and the phone will show in device manager as a Oneplus 9 G5, but the phone never indicates that it is plugged in and will not charge at all. Plugging the phone into a USB 2 or 3 port seems to do the same thing. Fastboot in recovery works fine. Turning of Default USB Configuration causes it to either detect as a generic USB Composite Device or as an MTP device (not sure how/when/what causes it to change). Charging and warp charging on a power brick works fine and it does show up in the phone.
Seems I am going in circles now and not sure how to get out of this cycle. Any suggestions would be most appreciated!
[TMO To Global] [No Dual-SIM Bug]
Requirements:- * Unlock Token * T-Mobile MSM Tool * OOS 11.2.10.10 and OOS 12 C.48 Global * Fastboot Enhance Instructions:- 1) MSM back to TMobile OOS11 and unlock bootloader through unlock token 2) Extract the payload file from...
forum.xda-developers.com
That will basically fix your problem. Just use le2115aa