NOTE:I shall not be responsible for any damage cause to your phone by this procedure.
As OREO on Honor 8 Lite brings treble support so rooting it is an issue for everyone.
I am here to guide you how to root Honor 8 Lite.
Requirements:
1.Unlocked Bootloader
2.Oreo Updated
3.Current running firmware (mine PRA-LA1C185B366)
4.Huawei Update Extractor (Download Below)
5.Magisk Manager latest apk.
6.Internet Connection.
7.Fastboot installed.
Procedure:
1.Extract RAMDISK.img from your downloaded firmware (or you can dump it using TWRP).
2.Transfer extracted RAMDISK.img to your phone.
3.Now open installed Magisk Manager and click install.
4.Now choose patch boot image and select the extracted RAMDISK.img.
5.It will take 5 min to download zip file and patch RAMDISK.img.
6.Patched RAMDISK.img usually stored in "sdcard/Download/patched-boot.img" or magisk manager will also guide you where the patched boot image stored.
7.Transfer the patched-boot.img to your pc.
8.Now boot your phone in bootloader mode.
9.Flash the patched-boot.img using this command"fastboot flash ramdisk (path of patched-boot).img" without qoutes.
10.After successful flashing reboot your phone either by holding power button or by using fastboot command.
BOOM your phone is rooted now start playing with magisk modules.
Related
Systemless Root Magisk Beta 15.2 ( Thanks @topjohnwu for Magisk)
As it is systemless so it doesn’t change system file. It only changes in Boot image.
Whenever you got OTA just Reflash Stock Boot img and update your device to latest version.
This Boot.img is taken from latest version of XUI 3.0 Nougat version Build No. X603-H575A-N-IN-171227V175. So When it will update need to Patch again boot.img with updated version or this can also be used.
Warning:-
I am not responsible for bricked devices.
Your warranty will void now. Do it at your own Risk.
Follow Step as Mentioned Below:
1. Unlock Boot loader as mentioned on following link:
https://forum.xda-developers.com/android/development/unlock-bootloader-infinix-zero-5-t3715360
2. If you want to install TWRP recovery then follow:
https://forum.xda-developers.com/android/development/infinix-zero-5-x-603-twrp-recovery-t3712491
Now the step for Systemless root with unlocked bootloader and usb debugging on is must. (with stock recovery no need TWRP)
1. Download the Zip file on following link: https://drive.google.com/open?id=1vne0IdPrW1isGoCJbYTCl4GRG5mh6QF5
2. Extract zip file in a folder.
3. Press and ctrl+Shift and right click on mouse.
4. Now press option open cmd window here, in window 10 it may be open powershall window here just select it.
5. In cmd window follow the following command.
A. adb reboot bootloader (phone will reboot and light blank dark screen)
B. fastboot devices (it will show your device if connected well)
C. fastboot flash boot patched_boot.img (it will flash new boot img in your phone.
D. fastboot reboot (will reboot your phone)
E. Install magisk manager app from XDA lab or from attached here in zip just extract it.
Your phone is rooted now with stock recovery.
OTA Update Support: Just follow above cmd again and at point C. just change flash cmd to stock boot. (fastboot flash Stock boot.img) then reboot and update your system OTA.
Thanks.
Last Updated on 05/01/2018
I can't install any module
/data/adb/xxx.img mount failed
Failed
Installation failed
$$root your Redmi note 4 mtk[nikel] miui without breaking ota updates $$
!! red wolf recovery is only available for snapdragon[mido], so we need an alternative !!
it is an alternative to the red wolf recovery method(google it)
**things required**
1.unlocked bootloader
2.pc running windows
3.twrp cofface recovery (url in comments)
4.latest magisk zip (url in comments)
5.platform tools (url in comments)
+unzip the platform-tools.zip and put it on desktop with the downloaded img file.
+put the magisk zip file in the phone's internal storage.
+boot the phone in fastboot mode and connect it with pc via usb cable
+run cmd as administrator.
++run the commands
1.cd %path to platform-tools%
2. fastboot devices
3.fastboot boot %path to your desktop%\cofface_twrp_nikel_recovery1124.img
[[[common error : can't load the img file
solution: just give the administrative privilages to fastboot.exe]]]
phone will boot in twrp recovery in a few minutes.
+now flash magisk zip
+wipe dalwik/cache. reboot system
=done. install magisk manager apk and start using root apps.
##this will not flash the twrp recovery, only boot temporarily into I,t so that we can root without flashing custom recovery.
******originally the post made for snapdragon version. but i got some problem with mtk version and finally found this solution******
shyamvora5 said:
$$root your Redmi note 4 mtk[nikel] miui without breaking ota updates $$
!! red wolf recovery is only available for snapdragon[mido], so we need an alternative !!
it is an alternative to the red wolf recovery method(google it)
**things required**
1.unlocked bootloader
2.pc running windows
3.twrp cofface recovery (url in comments)
4.latest magisk zip (url in comments)
5.platform tools (url in comments)
+unzip the platform-tools.zip and put it on desktop with the downloaded img file.
+put the magisk zip file in the phone's internal storage.
+boot the phone in fastboot mode and connect it with pc via usb cable
+run cmd as administrator.
++run the commands
1.cd %path to platform-tools%
2. fastboot devices
3.fastboot boot %path to your desktop%\cofface_twrp_nikel_recovery1124.img
[[[common error : can't load the img file
solution: just give the administrative privilages to fastboot.exe]]]
phone will boot in twrp recovery in a few minutes.
+now flash magisk zip
+wipe dalwik/cache. reboot system
=done. install magisk manager apk and start using root apps.
##this will not flash the twrp recovery, only boot temporarily into I,t so that we can root without flashing custom recovery.
******originally the post made for snapdragon version. but i got some problem with mtk version and finally found this solution******
Click to expand...
Click to collapse
download links
https://drive.google.com/open?id=1ScHj3zisQfntLCFlReYQlKtvP0wBT2fC twrp img
https://github.com/topjohnwu/Magisk/releases/download/v16.0/Magisk-v16.0.zip magisk zip
https://dl.google.com/android/repository/platform-tools-latest-windows.zip platform-tools
Hello, this is my first post
Don't let me waste time...
Requirements
1.Stock boot.img for your phone model (its best its for your Build Number / Variant ) . You can extract from the stock rom / firmware of your device OR backup from your device using a box e.g Miracle box, CM2, etc
2.Download Latest Magisk Manager
Steps on how to root an Elephone P8 Max using Magisk Manager and patched boot.img
Step 1: Patching the stock boot.img
1.Install MagiskManager apk on your android device
2.Copy the stock boot.img of your device to your phone's internal storage or SD card
3.Launch Magisk Manager app
4.If prompted to install Magisk, select NO THANKS
5.If you are using a samsung device and wish to flash using Odin, then select Options > Settings > Update Settings > Patched Boot Output Format > img.tar )
6.Select Install > Install > Patch Boot Image File >
7.Navigate to the location of the stock boot.img you copied earlier on, then Select it
8.Magisk Manager should begin downloading the magisk zip file used for patching
9.Once download is complete, MagiskManager will automatically patch the boot file and store it under SDcard/MagiskManager/patched_boot.img[.tar]
Step 2: Flashing the patched boot.img
You have a variety of options to flash the patched boot.img depending on you
1.Sp Flashtool
2.Fastboot
3.Miracle Box
1. For Sp Flashtool copy the patched boot.img with mt6755 scatter file and make sure to rename patched boot.img to boot.img before flashing
2.For fastboot copy the patched boot.img to your fastboot folder and press shift right click on a free space in the fastboot folder, you would see open command here. Click on it and boot your Elephone P8 Max to fastboot with power+volume up and use volume down to select fastboot and connect your Elephone P8 Max. Your PC type fastboot devices to check if the system as seen it. Now type fastboot flash boot patched_boot.img
You are done.
3.For miracle box rename the file from .img to .bin before flash.
In case you lazy..:laugh:
I have the patched_boot.img here
https://drive.google.com/file/d/17jjlC_znGMEA6HY0H0l4XP6LaBIv7n_t/view?usp=drivesdk
Enjoy..use root checker to confirm
Anyone who can support for custom recovery
TWRP for Elephone p8 Max
I need the newest TWRP for Elephone p8 Max. Can anybody help?
Thanks
Iamkratos said:
Hello, this is my first post
You have a variety of options to flash the patched boot.img depending on you
2.Fastboot
Click to expand...
Click to collapse
Hi I tried fastboot.
fastboot oem unlock OK
fastboot flash recovery patched_boot.img
works, but after switch off an boot into recovery, just normal android 7 starts, no twrp.
When boot finished, touching on display does not work anymore.
Any hinds?
Elephone P8_Max
Android 7.0
Build-Number:
Elephone_P8_Max_20171221
Thanks for any help.
aaaalbi2 said:
Hi I tried fastboot.
fastboot oem unlock OK
fastboot flash recovery patched_boot.img
works, but after switch off an boot into recovery, just normal android 7 starts, no twrp.
When boot finished, touching on display does not work anymore.
Any hinds?
Elephone P8_Max
Android 7.0
Build-Number:
Elephone_P8_Max_20171221
Thanks for any help.
Click to expand...
Click to collapse
Because you flash boot.img as recovery
That why your phone is getting that fault
You are suppose to flash boot
Fastboot flash boot patched_boot.img OK
Or use sp flashtool or miracle box
I included the scatter file
I have the twrp but it doesn't touch only if you use otg with Mouse
Alternative scatter file for MT6750
Hi lmkratos,
thank you very much!
This worked like a charm but I had to use a different scatter file (attached here) as the P8 Max has a MT6750 (not MT6755) and the PMT didn't match so spflash refused to flash boot ("PMT changed for the ROM").
If you happen to be on Linux: spflash works perfectly but take care to stop ModemManager (WAN modems) before flashing as it interferes, so
"service ModemManager stop".
rec Please send it, thank you
Iamkratos said:
I have the twrp but it doesn't touch only if you use otg with Mouse
Click to expand...
Click to collapse
rec Please send it, thank you
---------- Post added at 04:18 AM ---------- Previous post was at 04:16 AM ----------
Iamkratos said:
I have the twrp but it doesn't touch only if you use otg with Mouse
Click to expand...
Click to collapse
twrp Please upload, thank you
For those who would like to root, but not install any version of TWRP, here is a guide I put together. Hopefully it's easy enough and specific enough to understand:
1. Be sure to download the firmware you are CURRENTLY on to avoid any possible issues. Find it under SETTINGS, SYSTEM, ABOUT PHONE, BUILD NUMBER. The region is in parenthesis and the firmware version is the last three digits.
2. Extract the RAMDISK.img file using this Huawei Updater Extractor: https://forum.xda-developers.com/showthread.php?t=2433454
3. Obtain a previously patched RAMDISK file to get an initial Magisk install on your phone first. There is one on XDA floating around named CLT-29-MAGISK.img.
4. Boot into ***FASTBOOT and then get to a CMD window with your ADB tools and use the command "fastboot flash ramdisk CLT-29-MAGSIK.img"
5. Reboot the phone and download Magisk Manager 5.5.5. There may be other versions that work, but this version worked every time for me.
6. After installing Magisk Manager 5.5.5, install the next two upgraded versions while INSIDE Magisk Manager until you get to 7.1.x.x. To avoid any issues with Magisk Manager, don't exit out of the application until you install 7.1.x.x.
7. Click INSTALL on the first option next to the word MAGISK in Magisk Manager to patch your freshly extracted RAMDISK.img file from Step 2. Magisk Manager does not allow for direct installation of the Magisk zip file any longer so you need to patch a stock RAMDISK file to be flashed in Step 9.
8. Copy that RAMDISK.img file to your PC and place the file in your ADB tools folder. It would be good to save a copy of this file for later if you need to re-root. By doing so, you can avoid steps 1-3.
9. Boot into FASTBOOT and then get to a CMD window with your ADB tools and use the command "fastboot flash ramdisk patched_boot.img"
10. Reboot and you'll have root!
***FASTBOOT
To boot into FASTBOOT, turn off phone, hold down the VOLUME DOWN button for a few seconds, and while still holding it plug your charging cable into the phone. The screen should turn on with a white background indicating you are in FASTBOOT mode.
Hi good guid, I flashed version 9.0.0.252 and had a lot fc. back to 215, everything works, any idea what the latest European working version clt-lgrp2-ovs 9.0.0??
Who said this method to us ?
aIecxs, XDA Senior Member from Germany
https://forum.xda-developers.com/member.php?u=7285913
Thread Link :
https://forum.xda-developers.com/android/help/helproot-lava-x81-t3620166
Thanks alecks!!!!:highfive:
------------------------------------------------------------
Youtube Video Assistance:
Video Name: How to root Android using Magisk Manager & stock boot.img
Channel : Hovatek
------------------------------------------------------------
REQUIREMENTS :
(0) Unlocked Bootloader
To unlock bootloader in Lava X81 by Fastboot mode use the command
fastboot oem unlock #unlock bootloader via fastboot mode
{{{{{ NOTE: Unlocking bootloader in Lava X81 will erase all the user data. So please take a backup before unlocking bootloader. }}}}}
(1) Stock boot.img for your phone model (its best its for your Build Number / Variant ) . You can extract from the stock rom / firmware of your device (you may check our collection at https://forum.hovatek.com/forum-89.html ) OR backup from your device using a hardware box e.g Miracle Box, CM2, Nck Box Pro etc
(2) Download Latest Magisk Manager {Currently 7.3.0 (220)}
(3) Active internet connection on your Android device
(4) A windows 10 Laptop
---------------------------------------------------------
INSTRUCTIONS :
Step 1: Patching the stock boot.img
1. Install Magisk Manager 7.3.0 (220) APK on your android device.
2. Copy the stock boot.img of Lava X81 to your phone's internal storage or SD card whereever you want (Internal Storege\Dowloads is the better option)
3. Launch Magisk Manager app and check for latest updates. After the updates you will see that Magisk Manager is up to date.
4. Then, Select (Magisk is not installed. Latest 19.3 (19300)) Install > (Install Magisk) Install > Select and Patch a File >
5. Navigate to the location of the stock boot.img you copied earlier on (select Dowloads option or in my case, I used ES File Explorer File Manager), then Select it
6. Magisk Manager should begin downloading the magisk zip file for our arm64-v8a Device platform.
7. Once download is complete, MagiskManager will automatically patch the boot file and store it under
/storage/emulated/0/Download/magisk_patched.img
(Then I renamed it as "patched_boot.img" for our convenience)
Step 2: Flashing the patched boot.img
Among a variety of options to flash, I preferred Fastboot method
(0) Connect your Lava X81 one or two times to the PC (for preinstalling drivers)
(1) Boot your Lava X81 into fastboot mode.
(2) Open platform-tools_r28.0.1-windows.zip file
(3) Simultaneously press Keyboard's Shift key and Right click on the mouse, to open PowerShell window
(4) On the PowerShell use the following codes to flash:
Starting from phone's normal usb debugging mode,
adb devices #Ensures your phone connectivity in ADB (Android Debug Interface) mode via USB Debugging
adb reboot-bootloader #Reboot your phone to Fastboot Mode from ADB
fastboot devices #Ensures your phone connectivity in Fastboot mode
fastboot getvar unlocked #To check whether the bootloader is unlocked or not. It should be unlocked to proceed further steps
fastboot flash boot patched_boot.img #Flash the Magisk Patched Boot image file in Fastboot Mode
fastboot reboot #Reboot to the system from exiting Fastboot Mode
(5) Congrats and check with a Root checker app for root status. While checking for root status itself pop out for root permission.
--------------------------------------------------------
Proofs and All the necessary files as a zip file - MediaFire Link
Root Lava X81 using Magisk Manager by patching stock boot image (No TWRP)
http://www.mediafire.com/file/zjb78878i52865c/Root_Lava_X81_using_Magisk_Manager_by_patching_stock_boot_image_%2528No_TWRP%2529.zip/file
It is worked successfully guys!
Try it.
Two Bugs:
1. Cannot try reboot to the stock recovery. It strucks. You have to switch off and switch on the phone. During this your phone will make fear "Performing factory reset". Don't worry! blah blah blah...
SO YOU MUST DEVELOP TWRP RECOVERY FOR LAVA X81
2. Cannot flash .zip files using Magisk only. It every time asks TWRP or any other recovery to flash the zip file.
So you must develop TWRP recovery for Lava X81
3. While installing SuperSU it says "binary occupied" by MagiskSU. So apps like FlashFire won't flash zip file.
4. Don't try to uninstall stock YouTube app & and replace it with YouTube vanced app. Use YouTube Vanced the app for no root along with MicroG. But YouTube vanced 14.21.54 seems to be exceptional.