Database Info

[TESTING][ROM][7.1.2] CM14.1 for janice [TESTERS NEEDED]

02/22 Update: Project temporarily on hold until March due to school.
03/19 Update: I'm back.
03/27 Update: It booted
Hi S Advance Community! I don't own this device but I compiled CM14.1 and I need testers who know how to logcat, use odin to reflash boot image, etc.
THIS BUILD IS TOTALLY UNTESTED (i don't have an s advance)!!! AS A RESULT, RECOVERY MODE MIGHT NOT WORK AFTER FLASHING THIS ROM AND YOU'LL NEED TO FLASH STOCK ROM USING ODIN IF THAT HAPPENS!
I just need info if it boots or not, and logcat/last_kmsg if it doesn't.
Link of rom (for advanced users only)
YOU AGREE TO NOT KILL ME FOR ANYTHING THAT HAPENS TO YOUR PHONE!
https://www.androidfilehost.com/?fid=745425885120695238 (again, FLASH AT YOUR OWN RISK)
Kernel Source (for GPL Compliance)
EDIT: Use this guide on how to make a logcat/last_kmsg dump when the ROM doesn't boot if you don't know how to (no need to flash the zip on that thread as this rom is an eng build already).
EDIT #2: ROM doesn't boot so I need the /proc/last_kmsg file obtainable from recovery after a failed boot.

Thanks! Downloading it ?

I'm waiting for feedback from the already downloaded it. If successful, please share some screenshots. Thanks in advance guys.

No-Lags said:
I'm waiting for feedback from the already downloaded it. If successful, please share some screenshots. Thanks in advance guys.
Click to expand...
Click to collapse
Sure

Hello the installation was a success, but when he went to the screen from Samsung he stayed frozen in it.

GabrielR52 said:
Hello the installation was a success, but when he went to the screen from Samsung he stayed frozen in it.
Click to expand...
Click to collapse
Thanks for testing! While the phone is stuck on the samsung logo, can you press the 3 button combo for recovery for 10+ seconds (without pulling the battery before) until the phone boots to recovery and copy /proc/last_kmsg to sdcard using recovery then upload it here? I need to see the kernel logs if it's an init related issue or a library related one.

Yea ! The installation was a success but it didn't boot...Stuck On the splash screen...I will flash it again and will let you know the kernal logs and stuff.....Thanks For your support for Janice

I will send tomorrow because today i haven't had the time, so that the last time I installed this android even holding the 3 keys to enter the recovery mode the cell phone was stopped on the logo of samsung, would have some other way of copying the /proc/last_kmsg ? But tomorrow i will install again and I'll see if i go into recovery, sorry my english if it is bad is that i am from Brazil

On Codina must be enabled SELINUX with boot parameter - 1 and cmdline=selinux.bootmode=permissive to boot up Nougat. For MM this wasn't needed.

Can someone try flashing this boot.img to see if the rom will boot?
https://drive.google.com/open?id=0Bw4AfK_vJ7JycWV4TmlOeldzWkE

3liteking148 said:
Can someone try flashing this boot.img to see if the rom will boot?
https://drive.google.com/open?id=0Bw4AfK_vJ7JycWV4TmlOeldzWkE
Click to expand...
Click to collapse
After flashing the rom do i have to flash it with recovery?

Tech x 125 said:
After flashing the rom do i have to flash it with recovery?
Click to expand...
Click to collapse
Flash it with TWRP (because twrp can flash images since 3.0)

Rom isn't boot. I'm using Phiz-touch
After flash not work recovery

psycrow17 said:
Rom isn't boot. I'm using Phiz-touch
After flash not work recovery
Click to expand...
Click to collapse
Thanks for reporting! No wonder why no one's giving me logs so I'm gonna make an odin flashable boot.img later with working recovery from some rom.

Hi guys! This is the just the odin-flashable tar of the boot image of PolishVodka's CM14.1 as recovery was said to work there.
https://drive.google.com/open?id=0Bw4AfK_vJ7JycVBST3pwS18tdms

Can I expect the recovery has been immersed in a new build? Maybe I'll try for it.

3liteking148 said:
Hi guys! This is the just the odin-flashable tar of the boot image of PolishVodka's CM14.1 as recovery was said to work there.
https://drive.google.com/open?id=0Bw4AfK_vJ7JycVBST3pwS18tdms
Click to expand...
Click to collapse
You know we have kernel + ramdisk + recovery on the same partition (initramfs)?
And here you'll see how this working:
https://github.com/Epirex/Samsung_STE_Kernel/blob/marshmallow/usr/u8500_initramfs.list

PolishVodka said:
You know we have kernel + ramdisk + recovery on the same partition (initramfs)?
And here you'll see how this working:
https://github.com/Epirex/Samsung_STE_Kernel/blob/marshmallow/usr/u8500_initramfs.list
Click to expand...
Click to collapse
Yeah I know about that partitioning layout but how should i name the initramfs for flashing in odin?
Edit: nvm about that i got what you're saying that there's something wrong about my initramfs. Thanks for the info

I could not install this new boot.img by Odin and cannot seem to get the log by logcat by that of a mistake "/sbin/sh: exec: line 1: logcat: not found"

????

[EOL][ROM][Unofficial][Updated 05/05/2017][Stable] Lineage OS 13 for Lenovo A706

Lineage OS 13 ROM for Lenovo A706
Now experience the android marshmallow system with Lineage OS on lenovo A706.
Features :-
Latest 6.0.1 android system
December 1, 2016 security patch level (updated to February 2017 but not edited build.prop)
Split screen support
Better RAM management
Enhanced Doze mode for better batery life
Night mode as seen on pixel device
Cyanogenmod Theme Support
Higher Antutu Benchmark support
Supports Google Assistant
Stay in touch for the updates.
Code:
#include
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards
* or you getting angry because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Hello guys!
In this thread i'll present an new ROM for Lenovo A706 (armani_row). This is an unofficial build, so this not supported by Lineage OS team.
Please be sure to read (and re-read) carefully, to avoid unnecessary questions.
What is Lineage OS?
Cyanogenmod is dead, and its successor is Lineage OS.
What works:
1. Bluetooth
2. Camera
3. Sound
4. WiFi
5. GPS
6. Sensors(Proximity and GSensor)
7. Microphone
8. Speaker
9. Dolby System(When earphones plugged in)
What doesn't work:
1. Front Camera
Flash Instructions:
1. Download and flash Philz Touch Recovery.
2. Download the ROM and copy it to your SD Card.
3. Reboot your device into the Philz Touch Recovery(by pressing Power+Vol UP+Down buttons at the same time).
4. Wipe cache and Dalvik cache and then factory reset your device.
5. Navigate to your ROM file location and flash the rom.
6. Wait till the process completes.
7. Reboot your phone.
Enjoy!
Note: 1. Download and copy the boot.img file to the rom and then flash the rom.
2. It will take some time to startup the device around 15-20 minutes.
3. Don't panic if your device don't show the charging animation, just plug in your device to charger and it will start charging.
4. Don't update to CM 14.1 using the OTA updates (SYSTEM UPDATES).
Downloads​Lineage_OS_13_LenovoA706​Leave a thanks and donate me through bitcoins or paypal if you like my post.
My Bitcoin Address : 12TMugc324rru2Vz4tgGNZwYSxox94Vrtn
ENJOY!!!

Reserved

omkolte17 said:
Reserved
Click to expand...
Click to collapse
bootlop..

flash twice with twrp 2.8.1.0 stuck on logo and download it again still stuck.use philz same result.please fix it...
sorry for my english

irwan78 said:
flash twice with twrp 2.8.1.0 stuck on logo and download it again still stuck.use philz same result.please fix it...
sorry for my english
Click to expand...
Click to collapse
hi, I have found the issue and fixed it, file is being uploaded on drive and the link will be updated soon

omkolte17 said:
hi, I have found the issue and fixed it, file is being uploaded on drive and the link will be updated soon
Click to expand...
Click to collapse
thanks...back to cm11...

The bootloop issue has been solved but
Hi guys, the boot loop issue has been solved but it seems that there is one more issue which needs to be fixed and my exams are getting over on 25/03/2017 so you all have to wait till the exams get over then I'll fix the issue and develop more ROMs for lenovo a706 and u can also suggest me a few cool ROMs which I can develop for this device. Thanks for waiting...
My device: Lenovo A706 Xperia Arc S

lineage 14.11
This fix?

adul354 said:
This fix?
Click to expand...
Click to collapse
issue has been fixed download the new boot.img and add it to your downloaded rom file.:good: :laugh:

Bootlop
omkolte17 said:
issue has been fixed download the new boot.img and add it to your downloaded rom file.:good: :laugh:
Click to expand...
Click to collapse
Flashing by replacing boot.img is not working, still getting bootloop. Tried flashing a couple of time but could not proceed ahead of boot screen for hours. Kindly advise what can be done.

sickkid53 said:
Flashing by replacing boot.img is not working, still getting bootloop. Tried flashing a couple of time but could not proceed ahead of boot screen for hours. Kindly advise what can be done.
Click to expand...
Click to collapse
download the boot.img again its reuploaded. :good:
thanks for waiting

omkolte17 said:
Lineage OS 14.1 ROM for Lenovo A706
Click to expand...
Click to collapse
- FAKE !
It's not Lineage OS 14.1 . It's cm 11 .
I see it in buid.prop
Code:
ro.build.version.release=4.4.4
ro.build.display.id=cm_a706-userdebug 4.4.4 KTU84Q 4dbdb99056 test-keys
ro.build.fingerprint=dns/cm_a706/a706:4.4.4/KTU84Q/4dbdb99056:userdebug/test-keys

Vladden said:
- FAKE !
It's not Lineage OS 14.1 . It's cm 11 .
I see it in buid.prop
Code:
ro.build.version.release=4.4.4
ro.build.display.id=cm_a706-userdebug 4.4.4 KTU84Q 4dbdb99056 test-keys
ro.build.fingerprint=dns/cm_a706/a706:4.4.4/KTU84Q/4dbdb99056:userdebug/test-keys
Click to expand...
Click to collapse
It's not fake, it's Lineage OS 14.1 but just I used the build.prop of cm11 (i.e., it is a ported rom) :laugh:

Not booting
omkolte17 said:
download the boot.img again its reuploaded. :good:
thanks for waiting
Click to expand...
Click to collapse
After flashing by replacing with new boot.img file, when I select to boot the device, it shows the lenovo logo and automatically shuts down. Powering on the device gives the same result. I also tried to wipe cache/data after flashing the rom but to no avail. Kindly suggest solution for this.
Thanks for your hard work and patience

sickkid53 said:
After flashing by replacing with new boot.img file, when I select to boot the device, it shows the lenovo logo and automatically shuts down. Powering on the device gives the same result. I also tried to wipe cache/data after flashing the rom but to no avail. Kindly suggest solution for this.
Thanks for your hard work and patience
Click to expand...
Click to collapse
same result....when i plugin charge my phone always reboot again and again...

irwan78 said:
same result....when i plugin charge my phone always reboot again and again...
Click to expand...
Click to collapse
download the 3 lib files from the thread in downloads section then navigate to system>lib in the rom and overwrite the 3 files there and then flash the rom and even if it wont boot up then download the new boot.img from here and then try again. Even if it won't boot up then I have to start developing the rom from scratch and u all have to wait again .
Thanks for your co-operation:good: :laugh:

Link
I can't open link lib files,any another link

Link working
adul354 said:
I can't open link lib files,any another link
Click to expand...
Click to collapse
all links are working, u can try the link given below:
https://storage.googleapis.com/driv...29501f85-f20d-4e26-8992-c391734ab62f?authuser

omkolte17 said:
download the 3 lib files from the thread in downloads section then navigate to system>lib in the rom and overwrite the 3 files there and then flash the rom and even if it wont boot up then download the new boot.img from here and then try again. Even if it won't boot up then I have to start developing the rom from scratch and u all have to wait again .
Thanks for your co-operation:good: :laugh:
Click to expand...
Click to collapse
not working for me...use new lib file and new boot.img still bootlop.so what i must to do...?

irwan78 said:
not working for me...use new lib file and new boot.img still bootlop.so what i must to do...?
Click to expand...
Click to collapse
okay so now I need to develop the rom from scratch and that might require a few days. :good:

Asus ZenUI 3.0 For (Land)

Asus zen ui 3.0 for Redmi 3s
Installation
Go to recovery
Full Wipe
Install The ROM
Gaaps not Required
Download link- https://drive.google.com/open?id=0B7Rx-zHwThXyQ05CSE5HZ0lGVzA
Full Rom Rivew:
This ROM developed by kodri

Bugs please

Do not install this ROM. My screen did not work after installation. I hardly went into the fastboot and with the help of MiFlash I repaired it.
P.s Now at startup instead of the logo Mi, I have an Asus logo.

I tested this rom 2 weeks ago. In my case it was very stable, everything works out of the IR port and the gif mode in the camera.

is it based on nougat?
---------- Post added at 04:13 AM ---------- Previous post was at 04:11 AM ----------
Insanitly said:
Do not install this ROM. My screen did not work after installation. I hardly went into the fastboot and with the help of MiFlash I repaired it.
P.s Now at startup instead of the logo Mi, I have an Asus logo.
Click to expand...
Click to collapse
You could flash splash.img in stock rom to restore it.

I downloaded the and observed that
Rom contains firmware files also
Why that files are needed
It may brick the device?
Please correct me if i am thinking wrong way

@addy692
Rom is based on 6.0.1, you can install without worry. Just to install another ROM just make a full WIPE + format DATA + flash original splash screen miui:
https://drive.google.com/file/d/0B5zcVayFTiaTd0hINUVkWHFhYk0/view
suorce:
http://en.miui.com/thread-503267-1-1.html
orginal thread:
http://en.miui.com/thread-716741-1-1.html
Before installing this ROM, you must perform FULL WIPE !!
- Dalvik/Art cache
- System
- Data
- Intenal storage
- Cache
Youtube:
https://youtu.be/MG60dtiSFpE
https://youtu.be/rLvN98-B6Xo

kemoti said:
@addy692
Rom is based on 6.0.1, you can install without worry. Just to install another ROM just make a full WIPE + format DATA + flash original splash screen miui:
https://drive.google.com/file/d/0B5zcVayFTiaTd0hINUVkWHFhYk0/view
suorce:
http://en.miui.com/thread-503267-1-1.html
orginal thread:
http://en.miui.com/thread-716741-1-1.html
Click to expand...
Click to collapse
Just to be safe
If i remove the firmware part from the rom zip amd then flash only system and boot
Will it work??

I do not know. I installed it in full and it worked fine.
One more thing .. This rom tolerates an external memory card only if it is formatted in FAT32. Unfortunately, it is a pain in the Zenfone.
This tool format sdcard to FAT32 system:
http://www.ridgecrop.demon.co.uk/guiformat.exe
Works well with Samsung 128GB sdcard

kemoti said:
I do not know. I installed it in full and it worked fine.
One more thing .. This rom tolerates an external memory card only if it is formatted in FAT32. Unfortunately, it is a pain in the Zenfone.
This tool format sdcard to FAT32 system:
http://www.ridgecrop.demon.co.uk/guiformat.exe
Works well with Samsung 128GB sdcard
Click to expand...
Click to collapse
Ok thanks i will try this rom

addy692 said:
Just to be safe
If i remove the firmware part from the rom zip amd then flash only system and boot
Will it work??
Click to expand...
Click to collapse
yes. I removed them and flashed using dual boot. Working fine.

fxsheep said:
yes. I removed them and flashed using dual boot. Working fine.
Click to expand...
Click to collapse
Thanks bro exactly what i wanted to do

Double tap to wake gestures works?
And what about finger print and IR blaster?

javhusin2 said:
Double tap to wake gestures works?
And what about finger print and IR blaster?
Click to expand...
Click to collapse
Only fp is working

Thanks

How to root this rom? And is this a modded lineage or completely ported zen ui rom?

My phone using lcd tianma after flash this rom I got black screen thx.

kemoti said:
I tested this rom 2 weeks ago. In my case it was very stable, everything works out of the IR port and the gif mode in the camera.
Click to expand...
Click to collapse
Any bugs yoi faced? And how can i root it?

@kamalpreetsingh
I have written what does not work and what to do with the memory card. Root install SuperSU flash through twrp. The system is very fast and stable only the quality of the phone calls in my opinion is worse than in lineage or in miui.
@budie69
After installation, the first system boot takes a long time, you have to be patient.

I Have some Question
1. Does This Rom Booted Up?
2. How To install This Rom ?, Does its need to Delete the Firmware first?
3. Is there any Bug Present? Sensor? FP? IR Blaster?
4. Does this is The Real ZenUI or Just Mooded Lineage?
Thx Before

Resurrection Remix v7.0 Test build for crosshatch

Download : MOD Edit :- Links Removed
Let me know if it boots etc.
Gapps are included.

I have been hoping RR would come for the Pixel XL 3 - can't flash it now, am at work - but will give it a shot when I get home tonight - thanks

This didn't boot for me. It flashed fine in twrp and the boot animation came up and ran for a few minutes and then it booted back into twrp. Im going to try flashing a kernel on top and see if it boots.
No luck even after flashing a kernel. Any ideas on how to get it to boot up?

abduljaz7 said:
This didn't boot for me. It flashed fine in twrp and the boot animation came up and ran for a few minutes and then it booted back into twrp. Im going to try flashing a kernel on top and see if it boots.
No luck even after flashing a kernel. Any ideas on how to get it to boot up?
Click to expand...
Click to collapse
I think this one is GSI ROM, we have separate guide to Flash the ROM.
I strongly not recommend to flash this . Since we are not sure ,who is build and there is no flash guide
Sent from my Pixel 3 using Tapatalk

sendhiloo7 said:
I think this one is GSI ROM, we have separate guide to Flash the ROM.
I strongly not recommend to flash this . Since we are not sure ,who is build and there is no flash guide
Click to expand...
Click to collapse
I had GSI working on the pixel 3 xl, but just wasn't getting text messages for some reason, everything else worked fine

Cozzeck said:
I had GSI working on the pixel 3 xl, but just wasn't getting text messages for some reason, everything else worked fine
Click to expand...
Click to collapse
Which GSI Rom did you use ?.

jawonder said:
Which GSI Rom did you use ?.
Click to expand...
Click to collapse
Resurrection remix, I put my steps I used here
https://forum.xda-developers.com/pixel-3-xl/how-to/guide-how-to-install-gsi-rom-pixel-3-xl-t3892685

Cozzeck said:
Resurrection remix, I put my steps I used here
https://forum.xda-developers.com/pixel-3-xl/how-to/guide-how-to-install-gsi-rom-pixel-3-xl-t3892685
Click to expand...
Click to collapse
Thanks but the link for avbctdisable.zip in not working.

Thread Closed.
No details mentioned except a random link from internet.

A20 Custom Splash Screen for Android 10 GSI

Hi all,
I just made simple custom splash screen replacing Samsung A20 logo, I would like to share.
Hope you guys like it.
Size : 720 x 1560
you can use these files to replace both logo.jpg and svb_orange.jpg(delete boot_warning.jpg) using 7-Zip. Open archive, drag these two files and delete boot_warning.jpg.
By using this method:
https://forum.xda-developers.com/galaxy-a30/how-to/hide-bootloader-warning-unlocked-t3954589
This param.tar for SM-A205F (A205FXXS4ASJ4) can be flashed with odin, put as BL.
https://drive.google.com/file/d/1zVWtiKXTtQM4C2FS19fnqbk9Va9AeDfg/view?usp=sharing

Looks cool!

Amazing, very nice picture Thanks you

can you insert boot logo A50 fo A20e? thanks

Nice.

Anyone can make this flashable plz?

droidan said:
Hi all,
I just made simple custom splash screen replacing Samsung A20 logo, I would like to share.
Hope you guys like it.
Size : 720 x 1560
you can use these files to replace both logo.jpg and svb_orange.jpg(delete boot_warning.jpg) using 7-Zip. Open archive, drag these two files and delete boot_warning.jpg.
By using this method:
https://forum.xda-developers.com/galaxy-a30/how-to/hide-bootloader-warning-unlocked-t3954589
This param.tar for SM-A205F (A205FXXS4ASJ4) can be flashed with odin, put as BL.
https://drive.google.com/file/d/1zVWtiKXTtQM4C2FS19fnqbk9Va9AeDfg/view?usp=sharing
Click to expand...
Click to collapse
Hi bro my PC is broken can you make this flashable throught TWRP plz!???

droidan said:
Hi all,
I just made simple custom splash screen replacing Samsung A20 logo, I would like to share.
Hope you guys like it.
Size : 720 x 1560
you can use these files to replace both logo.jpg and svb_orange.jpg(delete boot_warning.jpg) using 7-Zip. Open archive, drag these two files and delete boot_warning.jpg.
By using this method:
https://forum.xda-developers.com/galaxy-a30/how-to/hide-bootloader-warning-unlocked-t3954589
This param.tar for SM-A205F (A205FXXS4ASJ4) can be flashed with odin, put as BL.
https://drive.google.com/file/d/1zVWtiKXTtQM4C2FS19fnqbk9Va9AeDfg/view?usp=sharing
Click to expand...
Click to collapse
I made and flashed multiple logos in Android 9 OneUI 1.1 and had no problems but I updated to Android 10 OneUI 2.0 last night and I flashed some new logos and all but logo.jpg changes and shows when booting ? I made custom lpm.jpg, svb_orange.jpg and logo.jpg but only logo still remains as the original "Samsung Galaxy A20" ?

Jeremy_J7 said:
I made and flashed multiple logos in Android 9 OneUI 1.1 and had no problems but I updated to Android 10 OneUI 2.0 last night and I flashed some new logos and all but logo.jpg changes and shows when booting ? I made custom lpm.jpg, svb_orange.jpg and logo.jpg but only logo still remains as the original "Samsung Galaxy A20" ?
Click to expand...
Click to collapse
Try return to pie then install ur favourite logo then update to 10 but don't flash BL slot in odin
I have made this A40 logo
Flash it as BL throught odin
Plz make it flashabe throught TWRP
---------- Post added at 01:45 AM ---------- Previous post was at 01:43 AM ----------
plzhelpabc123 said:
Try return to pie then install ur favourite logo then update to 10 but don't flash BL slot in odin
I have made this A40 logo
Flash it as BL throught odin
Plz make it flashabe throught TWRP
Click to expand...
Click to collapse
https://drive.google.com/file/d/1-A2J8y8Xj1Kcg_RzQMQRpUpCUqW4yWQ0/view?usp=drivesdk

plzhelpabc123 said:
Try return to pie then install ur favourite logo then update to 10 but don't flash BL slot in odin
I have made this A40 logo
Flash it as BL throught odin
Plz make it flashabe throught TWRP
---------- Post added at 01:45 AM ---------- Previous post was at 01:43 AM ----------
https://drive.google.com/file/d/1-A2J8y8Xj1Kcg_RzQMQRpUpCUqW4yWQ0/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks for the idea but going backwards right now is out of the question for me. I just wanna know how and why does the logo.jpg refuses to change ?
What's so special about this A40 logo that you made , and why should it be flashed through TWRP and not Odin ?

Try those and report I realy very tired to make those modded BL files
https://forum.xda-developers.com/galaxy-a20/help/a30-logo-a20-testing-t4141405

droidan said:
Hi all,
I just made simple custom splash screen replacing Samsung A20 logo, I would like to share.
Hope you guys like it.
Size : 720 x 1560
you can use these files to replace both logo.jpg and svb_orange.jpg(delete boot_warning.jpg) using 7-Zip. Open archive, drag these two files and delete boot_warning.jpg.
By using this method:
https://forum.xda-developers.com/galaxy-a30/how-to/hide-bootloader-warning-unlocked-t3954589
This param.tar for SM-A205F (A205FXXS4ASJ4) can be flashed with odin, put as BL.
https://drive.google.com/file/d/1zVWtiKXTtQM4C2FS19fnqbk9Va9AeDfg/view?usp=sharing
Click to expand...
Click to collapse
Very nice work.
Is working withe resurrection ROM. I replaced the paramBin on the stock rom BL und rezipped it, flash via Odin; go back to TWRP and let's go back to resurrection. Just had to reload custom Kernel and Magisk.

After I flashed the file it was successful, but when i reboot back it's stuck on bootloop.
Oh and btw my device's model is SM-A205W

DwineTheGreat said:
After I flashed the file it was successful, but when i reboot back it's stuck on bootloop.
Oh and btw my device's model is SM-A205W
Click to expand...
Click to collapse
What ROM ?

KineSight said:
What ROM ?
Click to expand...
Click to collapse
I have a Stock ROM. Well it's been past half an hour..

DwineTheGreat said:
I have a Stock ROM. Well it's been past half an hour..
Click to expand...
Click to collapse
What Android version ?