Is anyone here rocking this combo? I would like to know if you have had any issues with the glass lifting due to the fitment on this case?
I would also like to know , this would be my backup scenario =D I rock dbrand and rhinoshield right now.. perfect for me.
I have the spigen tough armor with whitestone dome and all is good. The whitestone dome doesn't cover your screen 100% therefore it will work with most cases.
bit the bullet and bought the thin fit 360 from amazon.
The whitestone does seem to fit at first but after a few days of use the whitestone started to lift. So for the hell of it I got some sandpaper and sanded the bottom and top lips down.
Four pages of Whitestone compatible cases.
https://www.mobilefun.com/samsung/galaxy-note-9/cases/whitestone-dome-compatible?p=1
Related
love this combo !!
Bobj gear case $24 (Amazon)
Skinomi tab s 8.4 tempered glass $16 (Amazon)
Light weight but sturdy rugged silicone skin/case.
Tempered glass screen protector keeps front glass protected.
-Ahmed-
How is the silicone case for tackiness as they can be dust/fluff magnets, I usually go for TPU cases because of this.
John.
Wikl the tempered glass cover the whole face of the tablet? I've been seeing a lot of tempered glass which is at least a millimeter short on all sides
The silicone case does pick up dust but since it's foodgrade silicone it is easy to wash plus it's the most rugged sturdy light weight silicone case I have ever owned...
As far as the tempered glass skinomi protector goes. Yes a 1mm space around the entire edged exists but I like it...
-Ahmed-
geminiahmed said:
love this combo !!
Bobj gear case $24 (Amazon)
Skinomi tab s 8.4 tempered glass $16 (Amazon)
Light weight but sturdy rugged silicone skin/case.
Tempered glass screen protector keeps front glass protected.
-Ahmed-
Click to expand...
Click to collapse
Do use a stylus, and if so do you run into any issues with the tempered glass?
Sorry I don't have a need for a stylusso I haven't tested it on the .33 mm. Tempered glass...
I can tell you that the glass screen protector is very thin and that I haven't had any issues with touch sensitivity..
-Ahmed-
Can everyone post their screen protector and case combination that works (no peeling edges). A few combinations were mentioned in individual posts but it would be good to have them listed together. Post away!
Has anyone found a good screen protector for the Note 7 that works with either the Spigen Neo Hybrid case or Caseology Parallax series cases by chance?
How about a protector with either a Samsung S-view or Spigen S-view case?
Thank you for this thread. Was about to create a similar one.
I have a Note 7 on pre-order and want to ensure a screen protector + case is with me before it arrives. Have spent a few hours going through various threads looking a for good combo that works without the screen protector peeling from the edges.
Ideally, would like to buy a tempered glass protector and a clear case. Any suggestions, please?
Also, does the official Samsung clear case and screen protector work well together? If tempered glass is a no-go, that would be my fallback option till something better comes along.
I have the Spigen Ultra Hybrid and now thinking of ordering this https://www.amazon.co.uk/gp/product..._act_image_4?ie=UTF8&psc=1&smid=A7ZMMLW05YAY7
adhesive on top and bottom no on edges and it's size is case friendly. Still waiting for the UAG Cobalt
Good call on this topic!
Zagg
Justinphxaz said:
Has anyone found a good screen protector for the Note 7 that works with either the Spigen Neo Hybrid case or Caseology Parallax series cases by chance?
Click to expand...
Click to collapse
I went to the Zagg kiosk at the mall and they had made the Zagg Clear HD case friendly and I am currently using a Caseology Parallax with no issues. The screen protector is a good one!
kontithegreek said:
I went to the Zagg kiosk at the mall and they had made the Zagg Clear HD case friendly and I am currently using a Caseology Parallax with no issues. The screen protector is a good one!
Click to expand...
Click to collapse
Nice! So no edges of the screen protector are peeling up from the edges? My wife's got that one case too and her Skinomi Techskin screen protector is doing well, the protector is still on pretty well but there is a very slight peel on one edge but it's slight and sits back down for a few days if you push it back down. My Spigen Neo Hybrid case doesn't play well with my Skinomi Techskin screen protector. I've gotta find another screen protector that'll work.
Justinphxaz said:
Has anyone found a good screen protector for the Note 7 that works with either the Spigen Neo Hybrid case or Caseology Parallax series cases by chance?
Click to expand...
Click to collapse
I have a JETech tempered successfully paired with my Parralax.
JawjaBill said:
I have a JETech tempered successfully paired with my Parralax.
Click to expand...
Click to collapse
Sweet! I'll have to take a look at that protector!
Justinphxaz said:
Nice! So no edges of the screen protector are peeling up from the edges? My wife's got that one case too and her Skinomi Techskin screen protector is doing well, the protector is still on pretty well but there is a very slight peel on one edge but it's slight and sits back down for a few days if you push it back down. My Spigen Neo Hybrid case doesn't play well with my Skinomi Techskin screen protector. I've gotta find another screen protector that'll work.
Click to expand...
Click to collapse
Yeah so far I have no problems I switch between the parallax case and the spigen rugged armor and everything has been good. Zagg has always been a favorite of mine on all my phones and they will only set you back like 25.00.
Hope this helps!
Verizon tempered screen protector and Samsung brand LED case.
I have the JETech from amazon uk with Spigen neo hybrid crystal. Works perfectly have checked with multi touch test app and there is no problem with touch sensitivity anywhere. No sign of any halo or other video. problem.
Easy install just have to line up with touch key lights.
I'm using icarez screen film with choetech ultra thin hybrid case and it doesn't peel off the icarez since the bumper goes over a protector a bit and holds it down. Also got another thin tpu Myriann that works with it the same way. Tried spigen ultra hybrid and it sometimes will peel it off very slightly but a few adjustments and it's good again. With the ringke fusion hybrid case forget it. Peel galore!
icarez
https://www.amazon.com/gp/your-acco...5027466&returnSummaryId=&shipmentId=DnCYPJLLH
Choetech ultra thin hybrid
https://www.amazon.com/gp/your-acco...3825810&returnSummaryId=&shipmentId=D32VdG0wH
Myriann thin tpu
https://www.amazon.com/gp/your-acco...1067442&returnSummaryId=&shipmentId=DrfpbHW1H
Sent from my SM-N930T using Tapatalk
This combo worked perfectly for me....
Galaxy Note 7 Case, POETIC Affinity Series Premium Thin/No Bulk/Clear/Dual material Protective Bumper Case for Samsung Galaxy Note 7 (2016) Black/Clear
https://www.amazon.com/Affinity-Pre...&qid=1472782554&sr=8-1&keywords=poetic+note+7
and
Official Samsung Galaxy Note 7 Screen Protector - Twin Pack
http://www.mobilefun.com/60374-official-samsung-galaxy-note-7-screen-protector-twin-pack.htm
No lifting of those Samsung screen protector on sides nor top and bottom on that Poetic case. I tried it on a SUPCASE Unicorn Beetle and they did lift up, so had to return that case.
MKchrias said:
I have the JETech from amazon uk with Spigen neo hybrid crystal. Works perfectly have checked with multi touch test app and there is no problem with touch sensitivity anywhere. No sign of any halo or other video. problem.
Easy install just have to line up with touch key lights.
Click to expand...
Click to collapse
Adheres the glass over the whole area? Or only the top and bottom from the jtech glass?
The Samsung oem clear case is working very well. Comfortable and feel solid. Better than the s6 s view case that I had that broke easily.
I will prefer a tempered glass but unfortunately none is good. Currently using oem Samsung SP. Affordable. Fit well at the edge. But can see lines over it after scratch and using s pen. But that's the purpose to protect the screen right
What holster cases are compatible with a phone that has tempered glass on it already. I just got a 6p and love the phone but wanted to grab a holster Case for it. I tried the Supcase but it's really tight trying to get the last side on and I didn't want to crack anything. Are there other options that fit well with tempered glass but still offer good protection?
I had a previous case with a screen protector built in for my S9+ and it worked great, but I'm having issues now. I found this one:
Case with Protector, but it says not compatible with fingerprint ID. I assume this is because of the fingerprint built into the screen?
Does anyone know of a case that has a screen protector AND works with the fingerprint reader? Or is the built in protector not possible due to the fingerprint reader in the screen now?
I would assume no built in screen protectors will work..in order for the FPS to work, the screen protector has to basically be attached to the screen with zero air gap between phone and protector..
jgruberman said:
I had a previous case with a screen protector built in for my S9+ and it worked great, but I'm having issues now. I found this one:
Case with Protector, but it says not compatible with fingerprint ID. I assume this is because of the fingerprint built into the screen?
Does anyone know of a case that has a screen protector AND works with the fingerprint reader? Or is the built in protector not possible due to the fingerprint reader in the screen now?
Click to expand...
Click to collapse
One of my friend used Gadgetshieldz case fit screen protector and he used many third party cases. Those fits are really great But I've ordered normal screen protector from them, waiting to order case fit once they released.
ArunRocker said:
One of my friend used Gadgetshieldz case fit screen protector and he used many third party cases. Those fits are really great But I've ordered normal screen protector from them, waiting to order case fit once they released.
Click to expand...
Click to collapse
and this was on the S10+?
For screen protector I would go with whitestone dome. For me it acts the same as if I had the preinstalled samsung film. I would then go on amazon and check out reviews and questions for whitestone dome. People tend to post their comparable cases. I am using the UAG Monarch and it fits without a problem.
I HIGHLY recommend the Whitestone protectors. The adhesive makes them SUBSTANTIALLY more chip/crack resistant and the touch sensitivity is light years ahead of other protectors (like ZAGG). It was my go-to on Note and now S10+.
I am a minimalist and finally found a case that's thin but also adds SOME protection. TORRAS on Amazon. The hard plastic has a matte finish, amazing touch and feel but little protection. The silicone option is thin, has ridges to protect camera and screen but slides in pants and pockets easily. It DOES offer drop protection relatively.
jgruberman said:
and this was on the S10+?
Click to expand...
Click to collapse
My Friend had an case fit screen protector applied on his S9+ from GadgetShieldz.
jstodda said:
I HIGHLY recommend the Whitestone protectors. The adhesive makes them SUBSTANTIALLY more chip/crack resistant and the touch sensitivity is light years ahead of other protectors (like ZAGG). It was my go-to on Note and now S10+.
I am a minimalist and finally found a case that's thin but also adds SOME protection. TORRAS on Amazon. The hard plastic has a matte finish, amazing touch and feel but little protection. The silicone option is thin, has ridges to protect camera and screen but slides in pants and pockets easily. It DOES offer drop protection relatively.
Click to expand...
Click to collapse
I actually just picked up the TORRAS Slim on Amazon, not sure if it's the same one you have. Currently I'm using the Spigen Rugged Armor... but it's too thin in my opinion. I feel like if I drop my phone, I have little protection. Spigen Rugged Armor Designed for Samsung Galaxy S10 Plus Case (2019) - Matte Black https://www.amazon.com/dp/B07MJQYDYB/ref=cm_sw_r_cp_apa_i_-cMICb49XRS4K
What case / screen protectors do you plan on using on your new p7p ?
If the modem is still terrible at least you can disguise it in a nice case
Not sure what people complain about. The modem on my P6P works pretty much exactly like every other phone I've ever had.
Anybody know if a P6P case will fit on a P7P? They seem pretty close to identical.
I've always liked Spigen cases, but I wish they would make them in hazel. The hazel one on the google store is not in stock, uggh. I usually go with Skinomi Matte screen protectors. Might try the spigen protector this time.
According to the Google Store, the only screen protector - as of now - that is "officially" rated to work properly with the FP scanner is the Case Mate variant, it's a flexible/non glass one.
I sifted through most ebay/Amazon P7 Pro screen protector offers that are available, and oddly enough most tempered glass screen protectors have a warning message that states that the FP scanner won't work due to a technical limiation.
Hopefully that doesn't mean that no glass screen protector will work.
--
Concerning cases, I planned on getting a Paralax from Caseology, but it seems that they changed their design. The P6 Pro had a wonderful two-toned design (gold colored accent on the camera hub and centered in the middle, with the black variant), that is now a boring/terrible grey-ish accent. So I'm not sure yet what kind of Case I'm going for.
The Caseology Athlex (a new case) looks promising, since it has a dent in the middle to rest your finger, but the neon colors on it are ridicolous.
What do you think about the Dbrand case?
Spigen is now a Made for Google partner with its Pixel 7 cases
Seems like there's no regular brown option for the bellroy leather case which is unfortunate.
I ordered a Caseology Parallax case and pre-ordered a Whitestone Dome tempered glass screen protector.
Spigen most thin option(I think tough armor it's called), and Whitestone Dome like always(there taking preorders and shopping soon). Whitestone dome was $19.99 for two.
I hope this can help someone.
Spigen tough armor
https://www.amazon.com/dp/B09YMTL3MM?psc=1&smid=A2SFKRF5TPZMT5&ref_=chk_typ_quicklook_titleToDp
Whitestone Dome
[UV GEN] Google Pixel 7 Pro (2022) Hard Coated Film Screen Protector with UV light - 2 Pack of Film
Galaxy S10 Tempered Glass Screen Protector LIQUID DISPERSION TECHNOLOGY - Our patented liquid glass evenly disperses over your entire screen, including existing scratches and scuffs, and hardens to create an impenetrable edge to edge barrier while repairing former cracks and imperfections. BEST...
www.whitestonedome.com
Samuel Holland said:
Spigen most thin option(I think tough armor it's called), and Whitestone Dome like always(there taking preorders and shopping soon). Whitestone dome was $19.99 for two.
I hope this can help someone.
Click to expand...
Click to collapse
IIRC, the Thin Fit is Spigen's thinnest model, and the Tough Armor is actually bulkier than the Thin Fit, Liquid Air, and Rugged Armor models.
I went with the Spigen Liquid Air. It's what I've got on my current phone. It hits the right balance for me between protection and bulk. FYI, though; some people don't like it because it's possible for stuff to get in the grooves in the triangle texture on the back. It doesn't bother me - I just brush it off, and it's fine - but I thought I'd mention it just in case that's something that's an issue for anyone.
Also, been using Spigen Thin Fit on my prior devices which works for me!
jbaysingar said:
IIRC, the Thin Fit is Spigen's thinnest model, and the Tough Armor is actually bulkier than the Thin Fit, Liquid Air, and Rugged Armor models.
I went with the Spigen Liquid Air. It's what I've got on my current phone. It hits the right balance for me between protection and bulk. FYI, though; some people don't like it because it's possible for stuff to get in the grooves in the triangle texture on the back. It doesn't bother me - I just brush it off, and it's fine - but I thought I'd mention it just in case that's something that's an issue for anyone.
Click to expand...
Click to collapse
galaxys said:
Also, been using Spigen Thin Fit on my prior devices which works for me!
Click to expand...
Click to collapse
Thanks, and yes, for me it needs to fit in my work shirt; I have thin fit on m yOnePlus 8 & 9 pro. I'm thinking a good chance, I'm gonna have to get another case, but I didn't see thin fit so I figured I'd try the tough option. Thanks for the heads up. I see on Spigen website, they have it along with a charger for free w/purchase.
Samuel Holland said:
Thanks, and yes, for me it needs to fit in my work shirt; I have thin fit on m yOnePlus 8 & 9 pro. I'm thinking a good chance, I'm gonna have to get another case, but I didn't see thin fit so I figured I'd try the tough option. Thanks for the heads up.
Click to expand...
Click to collapse
I hear ya. I'm not sure what's up with Spigen P7 Pro cases on Amazon right now. I had to go to Amazon's "Spigen Store" page to find the Liquid Air because it didn't show up in the search results for whatever reason.
FWIW, according to the Spigen website a P7 Pro version of the Thin Fit does exist, they just don't seem to be currently selling it on Amazon for whatever reason.
I have Caseology on my P6P. Looking at the Athlex for my P7P. I also bought Skinomi screen protector.
The Spigen Liquid Air looks pretty nice too. I have a week to decide while I wait for my phone to arrive.
Spiegen Liquid Air for her phone and Supcase Unicorn Beetle for me. Both with Supershieldz screen protectors. It's how our current phones are now. I'm just sticking with what has been working for me.
.
I'm doing the Caseology Parallax too. Have one on my P6 and I like it.
swieder711 said:
I have Caseology on my P6P. Looking at the Athlex for my P7P. I also bought Skinomi screen protector.
The Spigen Liquid Air looks pretty nice too. I have a week to decide while I wait for my phone to arrive.
Click to expand...
Click to collapse
I went with the Athlex, I have a vault on my p6pro. It should be here today.
I got the Spigen Rugged Armor as usual. I kinda wanted to try the Athlex (I kinda like the black/neon green one) but it seems really bulky!
I have ordered the luxurious bellroy leather case again, (same as for pixel 6 pro), and also the caseology one.
UK costs,
£49 and 16.99.
Both great cases.
Morgrain said:
According to the Google Store, the only screen protector - as of now - that is "officially" rated to work properly with the FP scanner is the Case Mate variant, it's a flexible/non glass one.
I sifted through most ebay/Amazon P7 Pro screen protector offers that are available, and oddly enough most tempered glass screen protectors have a warning message that states that the FP scanner won't work due to a technical limiation.
Hopefully that doesn't mean that no glass screen protector will work.
--
Concerning cases, I planned on getting a Paralax from Caseology, but it seems that they changed their design. The P6 Pro had a wonderful two-toned design (gold colored accent on the camera hub and centered in the middle, with the black variant), that is now a boring/terrible grey-ish accent. So I'm not sure yet what kind of Case I'm going for.
The Caseology Athlex (a new case) looks promising, since it has a dent in the middle to rest your finger, but the neon colors on it are ridicolous.
Click to expand...
Click to collapse
Where did you find the glass screen protectors? I only found one on Amazon.