(excuse me it's TWRP 2.8.4.0-Rev.2)
Hi Guys,
My phone is simply dead, when I'm switching it on it shows me bootloop. i can go into TWRP but when I'm trying to Factory reset to install new ROM I'm getting error (see below) i tried to install without factory reset but failed
i can't install ROMs and neither haven't one installed (that's why i have bootloop)
i tried a lot of things even prayed (just joke).
can you help me with that? :/
Updating partition details...
E: Unable to mount '/cache'
E: Unable to mount '/data'
E: Unable to mount '/system'
E: Unable to mount '/cust'
E: Unable to mount '/project_f'
E: Unable to mount '/project_s'
Hi there,
Here is what you are looking for:
[Q] Huawei Ascend G700 stuck at bootloop
Also please see this thread: [Guide] How transform my chinese huawei g700 into an european one
Good luck
Hello everyone . I just restored emui 5.0.1 with an update zip in twrp. But now...unable to mount vendor (invalid argument)
Please...someone help me.
Thank you very much . It worked !
im using a zenfone 5 a501cg lollipop version 3.24.40.87
the apps suddenly started crashing so i restarted the device but now its stuck in bootloop and when i flash it with stock rom following error appears
E:failed to mount /cache (invalid argument)
E:cant mount /cache /recovery/last_install
please help me find a fix asap. ive tried everything that i found here but it has been of no help at all
Hey guys,
Few hours ago, I Installed Poco x3 Europe ROM in my Global Poco X3 (with XiaoMiTool V2), and didn't start, it was in Bootloop. (Still don't know if this was a problem or not, I don't know what happened me that)
I solved it with MiFlash and flashing the lastest global rom "surya_global_images_V12.0.7.0.QJGMIXM_20201221.0000.00_10.0_global"
Finally, MIUI loaded, I install the TWRP, tried to flash crDroid ROM and these error appeared:
Updating partition details...
Failed to mount '/system_root' (Invalid argument)
Failed to mount '/product' (No such file or director)
After that, I don't know what I did, but I restarted and I didn't have any OS, phone starts automatically in Fastboot mode.
Again, reinstall the lastest rom with MiFlash, installed MIUI again, installed TWRP again, and I tried to flash LineageOS ROM:
Updating partition details...
Failed to mount '/system_root' (Invalid argument)
Failed to mount '/product' (No such file or director)
I retried to install the LineageOS again after that, and some extrange messages like:
patching system image unconditionally
patching product image unconditionally
After that, I installed OpenGapps Pico, and received Error 20. (I tried rebooting to TWRP again and flashing gapps again and same error)
Finally I made a reboot system, and LineageOS started, but without Gapps installed.
As you can see, I am newbie in the ROM world, I don't even know when to do wipe's (dalvik, cache, system) and format data, if before or after flashing ROM's, but yesterday, I installed ResurrectionRemix, ArrowOS, WaveOS and Pixel Experience ROM's without any problem.
What can I do?
Sorry you all for my bad english.
Best regards.
Since this happened to me, everytime I want to flash a clean ROM (European or Global) through XiaoMiTool V2, phone never work and start bootlooping in first screen (POCO in yellow) and I don't know why. I used XiaoMiTool V2 before and worked well.
Nobody know's what happening with my phone? My system_root and product partitions are broke? I need to change my rom, I don't like Miui haha
Use Orange Fox
or better TWRP
forsecom said:
Use Orange Fox
Click to expand...
Click to collapse
jeryll said:
or better TWRP
Click to expand...
Click to collapse
Small update.
I was using TWRP 3.4.0-15 (I think it's the lastest available)
Yesterday I installed OrangeFox R11.0_6 recovery, I flashed crDroid.zip ROM, apparently no problems with /system_root or /product:
patching system image unconditionally
patching product image unconditionally
After few seconds, error appear:
Failed to mount /vendor (Invalid argument)
After that (if my memory doesn't fail), I reboot in recovery, flashed NikGapps, and same error:
Failed to mount /vendor (Invalid argument)
I wiped cache, dalvik cache and format data, reboot system and crDroid started and I had Gapps installed, so maybe /vendor error is not serious, apparently everything works OK.
I flashed fw+vendor to flash another rom, and when I flash fw+vendor, I got error:
Failed to mount /vendor (Invalid argument)
After flash a new ROM.zip, I got error:
Failed to mount /vendor (Invalid argument)
After flashing gapps, I got error:
Failed to mount /vendor (Invalid argument)
Finally, I format data, and I got error:
Failed to mount /vendor (Invalid argument)
What the **** is /vendor and why happen this? xD
bartun said:
What the **** is /vendor and why happen this? xD
Click to expand...
Click to collapse
Vendor is specific to the device provided by the "vendor", i.e. usually the manufacturer (including customizations) – while System is the "Android base". If you upgrade a MIUI Rom with vendor deleted you're going to brick your device.
I think you need to do a full manual reinstall but I havent rooted my Poco. Maybe you wiped vendor when installing the custom rom... It advised to only wipe system and data
bartun said:
Hey guys,
Few hours ago, I Installed Poco x3 Europe ROM in my Global Poco X3 (with XiaoMiTool V2), and didn't start, it was in Bootloop. (Still don't know if this was a problem or not, I don't know what happened me that)
I solved it with MiFlash and flashing the lastest global rom "surya_global_images_V12.0.7.0.QJGMIXM_20201221.0000.00_10.0_global"
Finally, MIUI loaded, I install the TWRP, tried to flash crDroid ROM and these error appeared:
Updating partition details...
Failed to mount '/system_root' (Invalid argument)
Failed to mount '/product' (No such file or director)
After that, I don't know what I did, but I restarted and I didn't have any OS, phone starts automatically in Fastboot mode.
Again, reinstall the lastest rom with MiFlash, installed MIUI again, installed TWRP again, and I tried to flash LineageOS ROM:
Updating partition details...
Failed to mount '/system_root' (Invalid argument)
Failed to mount '/product' (No such file or director)
I retried to install the LineageOS again after that, and some extrange messages like:
patching system image unconditionally
patching product image unconditionally
After that, I installed OpenGapps Pico, and received Error 20. (I tried rebooting to TWRP again and flashing gapps again and same error)
Finally I made a reboot system, and LineageOS started, but without Gapps installed.
As you can see, I am newbie in the ROM world, I don't even know when to do wipe's (dalvik, cache, system) and format data, if before or after flashing ROM's, but yesterday, I installed ResurrectionRemix, ArrowOS, WaveOS and Pixel Experience ROM's without any problem.
What can I do?
Sorry you all for my bad english.
Best regards.
Click to expand...
Click to collapse
Install super.img from fastboot Rom
Hey guys, hoping someone can save me from having to buy a new phone. I either need to fix it quickly or replace it quickly cause my job depends on having one.
I have a Moto 9 g plus.
I wanted to root my phone for a long time and today I decided to try since the Android 11 update ****ed up the camera on my phone anyway.
I followed this guide here
Root Motorola Moto G9 Plus Android 10 using TWRP and Install Magisk
When you have Stock Android on your mobile, You are almost free from bloatware apps. Even if your manufacturer put some apps, You can get rid of them in
www.androidinfotech.com
Everything seemed to be going well except that I couldn't get magisk to install, I kept getting errors in twrp.
I ended up installing the apk for magisk and used it to modify the boot file. I installed the image in twrp and on reboot, it went into a boot loop. I could go back to trwp and after swiping to factory reset, it broke the loop when I restart the phone. The problem is that now it just goes straight to the menu that you normally need to press and hold down and power to go to. I never did get to confirm if my phone was successfully rooted or not, I'm guessing no, and that that is the main problem now, as the phone won't boot up to where I can use apps, and if it isn't rooted, from what I understand, I can't install another rom?
Also, whenever I'm finished with twrp, when I press to reset it says something like "Phone no longer has OS, are you sure you want to reboot?". I read it is from wiping the data or factory reset, but I didn't actually wipe any internal memory, I can still view all files on it and on my sd card.
Maybe you guys can confirm my suspicions that I just ****ed up my phone for good or not.
This is what the error says when I attempted to install a rom, I tried with lineage and arrowos and I don't believe the problem is with the roms.
E:unable to update logical partion: /system_root
E:unable to update logical partion: /vendor
E:unable to update logical partion: /product
Failed to mount '/system_root' (Invalid argument)
Failed to mount '/vendor' (Invalid argument)
E:Unable to open /system_root/system/apex
E:Unable to load apex images from /system_root/
system/apex
MTP Enabled
Failed to mount '/system_root' (Invalid argument)
Installing zip file '/external_sd/Arrow-v12.0-odessa
-UNOFFICIAL-20211013-gapps.zip'
Flashing A/B zip to inactive slot: A
Failed to mount '/system_root' (Invalid argument)
Failed to mount '/vendor' (Invalid argument)
Step 1/2
Error applying update : 7 (ErrorCode::
kInstallDeviceOpenError)
Updater process ended with ERROR: 1
To flash addition zips, please reboot recovery to
switch to the updated slot.
Error installing zip file '/external_sd/Arrow-v12.0-odessa
-UNOFFICIAL-20211013-gapps.zip'
Updating partition details . . .
. . . done
If I try to install magisk.zip it gives this error
Failed to mount '/system_root' (Invalid argument)
Installing zip file '/external_sd/Magisk-23.0.zip
Checking for Digest file . . .
Unmounting System . . .
********************************
Magisk 23.0 Installer
********************************
- Current boot slot: b
! Cannot mount /system
- Unmounting partitions
Updater process ended with ERROR: 1
Error installing zip file 'external_sd/Magisk-v23.0.zip
Updating partition details . . .
. . . done
Thanks to anyone to offers any suggestions, this is my first time attempting this, so don't assume I know anything, I just step by step tutorials and usually don't have problems like this.