I can't enter into the engineer mode in my mobile....
They say the code for its is that "*#*#3646633#*#*"
But it doesn't work!!!
Striker9985 said:
I can't enter into the engineer mode in my mobile....
They say the code for its is that "*#*#3646633#*#*"
But it doesn't work!!!
Click to expand...
Click to collapse
I think that's for MediaTek devices only
Related
Guys I have a question. Is there a bootloader mode for our phone? If there is can you please tell me how to enter it.
what exactly you want the bootloader mode for so i could answer you question
Android Crazy said:
Guys I have a question. Is there a bootloader mode for our phone? If there is can you please tell me how to enter it.
Click to expand...
Click to collapse
Do you mean download mode?
You can enter download mode by pressing vol. down + Home button + power button
Guys see i know what is download mode! I mean that how to access fastboot in our phone?
Android Crazy said:
Guys see i know what is download mode! I mean that how to access fastboot in our phone?
Click to expand...
Click to collapse
What exactly do you want to do in fastboot??
devilhell007 said:
What exactly do you want to do in fastboot??
Click to expand...
Click to collapse
I just want to know. Just in case...
Android Crazy said:
I just want to know. Just in case...
Click to expand...
Click to collapse
Fastboot is protocol used to update the flash filesystem in Android devices from a host over USB(wiki)
So as far as i can understand the download mode should be our fastboot
Rest ul have to wait for one of the devs to answer
hi guys i also want to know how to get to bootloader mode cause i saw a video in youtube which when in bootloader mode &connected to pc u can view ur phones installed rom in pc window i.e. Files like normalboot.img, etc. U can also replace normalboot.img by draging it from other window. simple & easy no need to flash etc.
Is it possible for i9003 ???
How would i go about putting my kltespr into diag mode for use with programs like cdma workshop and qpst?
gsfesz said:
How would i go about putting my kltespr into diag mode for use with programs like cdma workshop and qpst?
Click to expand...
Click to collapse
Think it is *#9090# but not 100% on that.
It's been a while since I entered the Diag mode in my G900P. I recently upgraded to lollipop. I tried to enter the diag mode but it can't be recognized in devices manager and even DFS. When i change the device into MTP+ADB , I can here the sound of pluging a device but when I change it th DM+Modem+ADB, I hear nothing just the disconnecting device sound .Does the lollipop system has anything to do with the problem??
Anyone may know why and how can I fix it?
please help
Thanks
No one has a solution?
no diag port
tired all possible codes nothing working, diag port really locked. any1 has any other thought.
bump
bump
ryu_gian said:
tired all possible codes nothing working, diag port really locked. any1 has any other thought.
Click to expand...
Click to collapse
never mind, solved.
ryu_gian said:
never mind, solved.
Click to expand...
Click to collapse
Do you mind sharing your solution? I've had the same problem since upgrading to lollipop.
Thanks
S5 Lollipop
Go to recovery Mode
Select enable CP Logging (2nd to last option)
Device reboots.
Dialer ##366633# / ##3424# <> Enable DM Mode <> DM Mode gets enabled.
hit the thank button on your way out.
ryu_gian said:
Go to recovery Mode
Select enable CP Logging (2nd to last option)
Device reboots.
Dialer ##366633# / ##3424# <> Enable DM Mode <> DM Mode gets enabled.
hit the thank button on your way out.
Click to expand...
Click to collapse
##366633# not working on sprint note4. But ##3424# is working after CP Logging. Thanks for the info
gurugopal said:
##366633# not working on sprint note4. But ##3424# is working after CP Logging. Thanks for the info
Click to expand...
Click to collapse
usually Verizon is ##366633#
and sprint is ##3424#
How to enter into recovery mode. I am on stock lollipop.
I have Tmobile S5 - G900T
ryu_gian said:
usually Verizon is ##366633#
and sprint is ##3424#
Click to expand...
Click to collapse
alkeshmehta said:
How to enter into recovery mode. I am on stock lollipop.
I have Tmobile S5 - G900T
Click to expand...
Click to collapse
recovery mode> Vol Up + Home + power
Solved.
enabled cp logging from recovery mode and it works
alkeshmehta said:
How to enter into recovery mode. I am on stock lollipop.
I have Tmobile S5 - G900T
Click to expand...
Click to collapse
ryu_gian said:
Go to recovery Mode
Select enable CP Logging (2nd to last option)
Device reboots.
Dialer ##366633# / ##3424# <> Enable DM Mode <> DM Mode gets enabled.
Hello,
Could you please tell me what cp logging enable/disable do?
Click to expand...
Click to collapse
you rock bro. Thanks a lot
ryu_gian said:
never mind, solved.
Click to expand...
Click to collapse
hI rYU_gIAN,
i am running g900f with rooted lollipop, when i went to recovery prior to cwm which is stock recovery i could not see enable cp logging option. Could you please advise how am i supposed to have that option enabled. I have stocked non root and root via odin and it is still not there.
meisterpido said:
hI rYU_gIAN,
i am running g900f with rooted lollipop, when i went to recovery prior to cwm which is stock recovery i could not see enable cp logging option. Could you please advise how am i supposed to have that option enabled. I have stocked non root and root via odin and it is still not there.
Click to expand...
Click to collapse
device seems to be GSM,
try *#0808# and select 'DM+MODEM+ADB or *#7284#
alkeshmehta said:
How to enter into recovery mode. I am on stock lollipop.
I have Tmobile S5 - G900T
Click to expand...
Click to collapse
Vol+ & Home & PWR
Root device by pingo root ,then install idone galaxy tool,then enable hidden menu by idone
On dialer *#0808#/##0909#
still no diag mode after following steps. Went to service mode as well to try to active it from there and it says diag mode not supported. Am running moar rom with a kt kernel. Any thoughts guys...
i have sm-g900r7 (galaxy s5 spire) android 5.0 stock
in stock recovery i have option for enable cp logging.
if i enable then boot to home screen and open dialer and enter *#0808# i can select dm+modem+adb and it works perfect.
i i flash twrp 2.8.6.0 kltespr i have to recovery option to enable cp logging.
i can dial *#0808# and get into menus but i can not enable dm mode when i select dm+modem+adb.
if i hit the reboot button i see set switch_sel x03 and then under that i see set switch sel and it boots to home screen
i dial *#0808# and select dm+modem+adb and no driver pops up or sound and anyhow it dont work
my question is.
can i boot to recovery and enter a cmd to enable cp logging or can i do that command from terminal emulator with root or from adb from windows computer.
got to have dm mode working.
thanks
Hello, everyone,
I've buy a mi4c for my sisters and it arrived with a multilanguange bad rom... so like with my other devices I try to change my rom, and I do a big error...
-I reboot to edl (with adb command) flash the fastboot rom with miflash , no error but now my phone stay black....
I find that here in an other topic : http://en.miui.com/thread-170110-1-1.html
Do you think that will work ? else do you have another solution ?
qualcomm driver is working but nothing else....
hold the power button for 8s
Try to use miflash to do that again.
Hello, thanks for your answers,
Hold 8s : I have already done that, don't work
Sakura_Sa233 said:
Try to use miflash to do that again.
Click to expand...
Click to collapse
Retry same if my phone couldn't go to fastboot ?
jordandroid64 said:
Hello, thanks for your answers,
Hold 8s : I have already done that, don't work
Retry same if my phone couldn't go to fastboot ?
Click to expand...
Click to collapse
Do you know 8009 mode？
Sakura_Sa233 said:
Do you know 8009 mode？
Click to expand...
Click to collapse
No, it's when the qualcomm driver appear ?
jordandroid64 said:
No, it's when the qualcomm driver appear ?
Click to expand...
Click to collapse
You can search it in Google .
Sakura_Sa233 said:
You can search it in Google .
Click to expand...
Click to collapse
I have seen this is mode which permit to repair a qualcomm device brick... But there are tutorials for device really complicated...
But i will try with miflash like you said
Hey,
I had reconnect it to reflash by miflash and now the led is blinking red but qualcomm driver diseappear
edit : MI4c work now ! thanks !
I did a lot of research and found that you need an authorized account to get it back, can anyone help me with guidance on what to do, or another method that works?
using edl mode but you need to open yor device you can find more info about eld mode and how to use it in the forum or internet
tutibreaker said:
using edl mode but you need to open yor device you can find more info about eld mode and how to use it in the forum or internet
Click to expand...
Click to collapse
I tried to do it this way but no, do you have a video or website to teach better?