Hi everyone! I'm having trouble updating my U12+, I'm still on the base ROM 1.15.401.4 HTC__002 S-ON. Whenever I try updating thru wifi I'm always getting this error (Please refer to the attached image). I also downloaded the RUU file transferred to my SD card and tried flashing thru download mode but it doesn't work. Instead I also got an error message saying CID mismatched. Can someone helped me on this? I'm not a newbie and not so advanced as well. A support is much appreciated. Thanks!
I also attached the screenshot of my U12+ when tried flashing thru RUU with SD card
Where are you getting your RUU zip file from? Are extracting it from the RUU exe file listed on the Google spreadsheet? Did you try another version of the RUU? I needed to use an earlier version of the RUU than what was originally on my phone in order for my phone to take the flash and boot up. From there I was able to use the system menu software update to receive the OTA updates until my phone had the latest OS version.
Good luck.
Sent from my HTC U11 using Tapatalk
HTC__002 is the CID that belongs to demo devices. These devices aren't meant to be sold and therefore not meant to be used normally.
Older HTC demo devices were supported by the 401 RUUs. It looks like that isn't the case with the U12+, anymore.
Sent from my HTC U12+ using XDA Labs
Flippy498 said:
HTC__002 is the CID that belongs to demo devices. These devices aren't meant to be sold and therefore not meant to be used normally.
Older HTC demo devices were supported by the 401 RUUs. It looks like that isn't the case with the U12+, anymore.
Sent from my HTC U12+ using XDA Labs
Click to expand...
Click to collapse
Yeah someone sold it to me online, initially, it was fine but after setting up the device then Demo came up. So I was trying to flash a custom recovery on the device so I can access the system app and remove it. However today I was able to flash a TWRP recovery, unfortunately, OS got wiped out and no idea how did it happen. I downloaded the custom ROM of Pyrana and I overlooked that I have to be on the updated firmware which the 1.30.401.2. I flashed, then boom! wifi doesn't work anymore.
Try to S-OFF your phone with Sunshine and change your CID to HTC__034 , than you should be able to flash the european RUU.
Related
I bought my used Desire S and it was rooted with revolutionary so i could not get OTA from 2.3.3 beyond. I read some threads but nobody was telling me which RUU i needed as my phone was unbranded and i was not sure about its origin. I managed to bring back the official stock Rom and original radios, hboot and downloaded and installed 2.3.5 successfully.
Nobody could help but finally i managed to take the risk and it paid off thankfully.
It is the easiest and fastest way to unroot, remove superuser, revolutionary and to restore hboot back to normal and S-On again, to get official updates including ICS.
Download the attachment "usmanxhmed.rar", it has Android Flasher and FlashENGHBOOT.
Attach your phone to PC with USB cable, make sure you have HTC fastboot drivers installed.
Open Android Flasher and select bootloader and browse to the file FlashENGHBOOT which you downloaded in file "usmanxhmed.rar", boot phone into fastboot and click flash.
It will remove REVOLUTIONARY **** from the phone.
Now download your specific RUU from this link http://www.filefactory.com/f/c64d333a2755a421/ i was unsure which is my RUU for the phone as i bought it second hand, my phone was unbranded, i matched the software version and radio version in my software information of the phone and downloaded the specific RUU.
After flashing the RUU my Desire S became factory fresh and back to S - ON and updated my phone with Android 2.3.5 and Sense 3 and hopefully/ may be i will get ICS in future as well
Good guide cheif :thumbup:
Sent from my HTC Desire S using XDA
Thanks ttocs99
Quick question, this might not be the best spot for it but it is somewhat related.
My desire s is branded/locked to vodafone portugal, so i have no specific RUU in that list. What will happen if i use Europe one? Or UK's Vodafone?
Best Regards,
Daniel
dan_alexandre said:
Quick question, this might not be the best spot for it but it is somewhat related.
My desire s is branded/locked to vodafone portugal, so i have no specific RUU in that list. What will happen if i use Europe one? Or UK's Vodafone?
Best Regards,
Daniel
Click to expand...
Click to collapse
Vodafone UK !
I have a Desire S from Vodafone Germany and it works perfect with the Vodafone UK RUU.
Stefan
I know there are several threads like this one but I prefer not to write another RUU request while you're answering to another user
So, I got a HTC One S S3 yesterday... I began to unlock it because I wanted to change its CID. I found that in the S3 version the CID can't be changed (still) when I had already installed the TWRP Recovery.
Now I'd like to go back to stock, but there is not a RUU compatible with my device: It has VODAP102 as CID, but the RUU for Vodafone AT here doesn't work. I found the kernel source for the same software version I have in htcdev.com, my question is: is it possible to build a RUU or at least a boot.img from it?
The sources can be found in htcdev /devcenter/downloads (sorry but being new I can't post direct links!), HTC One S as Device, Vodafone as Carrier and UK -
1.11.161.133 as software version. Actually I am in Italy, but the software and kernel version are exactly the same.
Thank you in advance.
Bump to first page and a little addendum:
I've read again all the possibilities I have with this phone, and if I have understood accurately then I'm forced to go back to stock, roms like the ThickDroid seem to require a non-branded CID, but that's the point... it is the CID that's compelling me to maintain this original Vodafone software, otherwise I would have already installed the HTC "basic" rom.
Am I missing something?
Thank you again!
Have you tried looking on HTCRUU.COM?
Check your radio id on the bootloader screen then flash the appropriate ROM
mikejasonsmith said:
Have you tried looking on HTCRUU.COM?
Check your radio id on the bootloader screen then flash the appropriate ROM
Click to expand...
Click to collapse
Yes I checked, but they have just unbranded RUUs, here in the forum there's one RUU for Vodafone but the region isn't the same as mine.
I've read that it is possible to flash an OTA update deleting the string that checks the CID - I'll have to take a look about that (moreover, it seems very difficult to find .zip OTA updates for this phone...).
Nevertheless I'd like to find this RUU update too - it is an important option too. So... bump to first page.
hi guys,
i've a htc m8 verizon branded and I'm asking if i can rename the model ID to use with stock rom such as european rom. is it possible?
thanks
Peuf said:
hi guys,
i've a htc m8 verizon branded and I'm asking if i can rename the model ID to use with stock rom such as european rom. is it possible?
thanks
Click to expand...
Click to collapse
If s-off you can. But not sure that's necessary as once s-off you could flash the intl firmware and then a custom intl (stock rom). If you attempt to fully convert by changing mid and cid and then ruu you likely won't succeed. There's more to it than that.
Sent from my XT1575 using Tapatalk
dottat said:
If s-off you can. But not sure that's necessary as once s-off you could flash the intl firmware and then a custom intl (stock rom). If you attempt to fully convert by changing mid and cid and then ruu you likely won't succeed. There's more to it than that.
Click to expand...
Click to collapse
ok, thanks for your help. Yes i'm s-off and I've changed teh mid to 0P6B100 and cid to supercid but you're right, i get error everytime i try to flash ruu.
and on top of that, i cannot revert back to verizon mid with the mid changer thing. now i'm stuck with a no rom m8 'coz none of all i've tried did work, neither zip flashable ruu nor the exe one
a little help please
Peuf said:
ok, thanks for your help. Yes i'm s-off and I've changed teh mid to 0P6B100 and cid to supercid but you're right, i get error everytime i try to flash ruu.
and on top of that, i cannot revert back to verizon mid with the mid changer thing. now i'm stuck with a no rom m8 'coz none of all i've tried did work, neither zip flashable ruu nor the exe one
a little help please
Click to expand...
Click to collapse
So this is usually what happens. I can help you back out of it if you want using teamviewer if you are game. The partitions from a Verizon to a sprint to an intl m8 aren't the same. That's the problem.
Sent from my XT1575 using Tapatalk
dottat said:
I can help you back out of it if you want using teamviewer if you are game.
Click to expand...
Click to collapse
yes I am, the thing is, i'm on mac os x. adb and fastboot cmd are working great but if you plan to use shell cmd I'm not sure it will work though
I think The same happened to me
I'm bringing this over from the HTC One help thread as instructed
I'm on Metropcs and wanted an HTC One GPE
Bought an unlocked verizon HTC One M8
Rooted it with kingroot, then unlocked the bootloader and s-off with sunshine.
Was in the process of changing the model id by flashing it with Golv's MID changer when the usb cord was pulled from the computer (I'll take that to the appropriate thread for THAT discussion)
Now the phone only comes up in bootloader mode, but I have no options (reset, reboot etc) it only says RUU where my options were.
ADB won't detect the phone however fastboot will and when I do fastboot getvar all I seem to have all the original stuff. (Except the CID has been changed to GOOGL001)
I can fastboot reboot-bootloader but the screen comes up as if I did fastboot oem rebootRUU except that there is a triangle in each corner of the screen with an exclamation mark in them.
Yes this is my first time trying anything like this.
Any ideas would be appreciated.
heinzdb said:
I'm bringing this over from the HTC One help thread as instructed
I'm on Metropcs and wanted an HTC One GPE
Bought an unlocked verizon HTC One M8
Rooted it with kingroot, then unlocked the bootloader and s-off with sunshine.
Was in the process of changing the model id by flashing it with Golv's MID changer when the usb cord was pulled from the computer (I'll take that to the appropriate thread for THAT discussion)
Now the phone only comes up in bootloader mode, but I have no options (reset, reboot etc) it only says RUU where my options were.
ADB won't detect the phone however fastboot will and when I do fastboot getvar all I seem to have all the original stuff. (Except the CID has been changed to GOOGL001)
I can fastboot reboot-bootloader but the screen comes up as if I did fastboot oem rebootRUU except that there is a triangle in each corner of the screen with an exclamation mark in them.
Yes this is my first time trying anything like this.
Any ideas would be appreciated.
Click to expand...
Click to collapse
Same thing I offered the guy abovw
Sent from my XT1575 using Tapatalk
ok, so let's do it then
seems like finally I figure out how to fix it. I was able to bring back the verizon's MID by using the shell command and then flash a verizon's rom and firmware without any issues
Fixed it!
dottat said:
Same thing I offered the guy abovw
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Thanks so much for your offer, but someone told me about another post of yours using ruuM8_TWRP_2_7.zip and that solved it! So either way you're a great help!
Now is there a way I can get this phone's hotspot to work on the Metropcs plan? (That's what started this debacle)
I have been doing a lot of reading up on changing the branding/region of the U11 and think I have the steps worked out. Would just like
someone who has done this to comment on if it seems right to them.
So Going from DUGL India to DUGL EMEA I would
1. Install sunshine for s-off so I can change the CID, current MID is the same as EMEA.
2. Change CID from download mode, fastboot oem writecid HTC__034
3. Download and install EMEA ruu
Thanks, MadMungo
Well I had time to give it a go and was successful. I am now on the (HTC__001) EMEA dual sim firmware from the (HTC__060) Indian dual sim firmware.
If anyone else wants to give it a go it was real simple, I just followed the following steps
1. Install sunshine for s-off to change the CID.
1a. Download EMEA RUU and copy to root of SD card and rename to 2PZCIMG.zip
2. run Sunshine to boot into s-off download mode,
2a. Change CID by running fastboot oem writecid HTC__001 on PC
2b. press Volume Down button to cancel RUU update and check CID = HTC__001
3. select reboot to Download Mode
3a. press Volume Up button to confirm flash of RUU
4. Once phone has been rebooted enjoy setting up new phone on EMEA firmware.
hope this helps someone else out there.
MadMungo said:
Well I had time to give it a go and was successful. I am now on the (HTC__001) EMEA dual sim firmware from the (HTC__060) Indian dual sim firmware.
If anyone else wants to give it a go it was real simple, I just followed the following steps
1. Install sunshine for s-off to change the CID.
1a. Download EMEA RUU and copy to root of SD card and rename to 2PZCIMG.zip
2. run Sunshine to boot into s-off download mode,
2a. Change CID by running fastboot oem writecid HTC__001 on PC
2b. press Volume Down button to cancel RUU update and check CID = HTC__001
3. select reboot to Download Mode
3a. press Volume Up button to confirm flash of RUU
4. Once phone has been rebooted enjoy setting up new phone on EMEA firmware.
hope this helps someone else out there.
Click to expand...
Click to collapse
Nice little guide mate. May I make a suggestion though. The better CID if one lives in central Europe would be HTC__034 as far as I remember.
Sent from my HTC U11 using XDA Labs
Thanks for the guide, am planning to change Indian Dual Sim CID to US Single Sim is tis achievable? please advise.
5m4r7ph0n36uru said:
Nice little guide mate. May I make a suggestion though. The better CID if one lives in central Europe would be HTC__034 as far as I remember.
Sent from my HTC U11 using XDA Labs
Click to expand...
Click to collapse
Hey, I am in Australia and bought the phone from overseas vendor as it was cheaper and I needed a dual sim phone so I didn't have to carry 2 phones around. I now have a different job and don't have a need for dual sims I was wondering if it is possible to set the phone up as a single sim by changing the CID to one of either HTC__001 Prefered, (HTC__M27, HTC__002, HTC__034 Optional) and the MID to 2PZC10000.
MadMungo said:
Hey, I am in Australia and bought the phone from overseas vendor as it was cheaper and I needed a dual sim phone so I didn't have to carry 2 phones around. I now have a different job and don't have a need for dual sims I was wondering if it is possible to set the phone up as a single sim by changing the CID to one of either HTC__001 Prefered, (HTC__M27, HTC__002, HTC__034 Optional) and the MID to 2PZC10000.
Click to expand...
Click to collapse
Why wouldn't you use it as is, You could use the second SIM tray as an SD tray and all fine. Why convert it.
Sent from my HTC U11 using XDA Labs
5m4r7ph0n36uru said:
Why wouldn't you use it as is, You could use the second SIM tray as an SD tray and all fine. Why convert it.
Sent from my HTC U11 using XDA Labs
Click to expand...
Click to collapse
Thats what I am doing now. Am just curious if it is possible.
MadMungo said:
Well I had time to give it a go and was successful. I am now on the (HTC__001) EMEA dual sim firmware from the (HTC__060) Indian dual sim firmware.
If anyone else wants to give it a go it was real simple, I just followed the following steps
1. Install sunshine for s-off to change the CID.
1a. Download EMEA RUU and copy to root of SD card and rename to 2PZCIMG.zip
2. run Sunshine to boot into s-off download mode,
2a. Change CID by running fastboot oem writecid HTC__001 on PC
2b. press Volume Down button to cancel RUU update and check CID = HTC__001
3. select reboot to Download Mode
3a. press Volume Up button to confirm flash of RUU
4. Once phone has been rebooted enjoy setting up new phone on EMEA firmware.
hope this helps someone else out there.
Click to expand...
Click to collapse
Hey,
Thanks for the help and the guide. I was trying to do exactly the same thing.
I got stuck at the final stage. I was trying to SD card flash one of the combined nowipe firmware zips (https://androidfilehost.com/?fid=817906626617943112) and I get an error 10 when flashing, which makes no sense because the MID on my phone and in the zip are both correct. CID changed successfully and checked. S-OFF all ok and booted using sunshine before trying to flash the firmware.
any ideas? perhaps I am trying to flash the wrong thing and I have to do a full RUU flash somehow? Trying to avoid this because running leedroid rom and am lazy to setup again.
thanks for any ideas, Russ
bigruss said:
Hey,
Thanks for the help and the guide. I was trying to do exactly the same thing.
I got stuck at the final stage. I was trying to SD card flash one of the combined nowipe firmware zips (https://androidfilehost.com/?fid=817906626617943112) and I get an error 10 when flashing, which makes no sense because the MID on my phone and in the zip are both correct. CID changed successfully and checked. S-OFF all ok and booted using sunshine before trying to flash the firmware.
any ideas? perhaps I am trying to flash the wrong thing and I have to do a full RUU flash somehow? Trying to avoid this because running leedroid rom and am lazy to setup again.
thanks for any ideas, Russ
Click to expand...
Click to collapse
Russ,
Sorry to here you are having troubles. I am just a user, no technical knowledge but will try to help.
As far as I can tell from reading various posts on this, you will need to flash to the latest stock RUU, https://androidfilehost.com/?fid=745425885120762674 . Then you can flash the OTA http://fotadl-az.htc.com/secure/OTA_OCEAN_DUGL_N71_SENSE90GP_HTC_Europe_1.27.401.11-1.27.401.5_release_512994zou8hacebhmotmqg.zip using the original stock recovery, no need to be S-OFF for OTA flash.
Unfortunately you will then need to start with leedroid rom all over again.
Maybe one of the more technical guys could help you if you ask in the Firmware collection How-To Thread
thought that might be the case, thanks for the reply, much obliged.
HTC U11 India Oreo update:
https://forum.xda-developers.com/u11/how-to/collection-htcu-u11-ruu-firmware-t3612048/page99
Can we try something similar with the HTC TW ROM. I am guess its CID is 80.
I am guessing that the TW ROMs would receive updates from HTC before other regions.
Any inputs will be appreciated
Thank you!
Oreo update for the u11 EMEA from nougat 1.27.401.11
Hello guys, would really appreciate it if someone updates me on how to bring my U11 EMEA to Android 8.0 Oreo. I am currently running nougat version number 1.27.401.11. Thanks. Will keep checking this thread
benardssekitte said:
Hello guys, would really appreciate it if someone updates me on how to bring my U11 EMEA to Android 8.0 Oreo. I am currently running nougat version number 1.27.401.11. Thanks. Will keep checking this thread
Click to expand...
Click to collapse
Unlock bootloader via htc dev website.
Flash twrp.
Flash magisk
Buy s-off for $25 via sunshine.
Change cid to BS_001
Flash 1.xx.617.xx firmware (same version as you already have running on the phone but 617 region).
Update to oreo via ota.
Job done.
You will need the htc_fastboot.exe that is specifically made by htc for flashing. You can find it all over the m9 forums or on Google.
Thanks
benardssekitte said:
Hello guys, would really appreciate it if someone updates me on how to bring my U11 EMEA to Android 8.0 Oreo. I am currently running nougat version number 1.27.401.11. Thanks. Will keep checking this thread
Click to expand...
Click to collapse
Well, there's an OTA Update that will take you straight to Oreo from the version you're currently on. No need to unlock bootloader or anything else. It's there in this thread
You wouldn't lose any data either, but just take a backup nonetheless.
---------- Post added at 07:55 PM ---------- Previous post was at 07:52 PM ----------
MadMungo said:
I have been doing a lot of reading up on changing the branding/region of the U11 and think I have the steps worked out. Would just like
someone who has done this to comment on if it seems right to them.
So Going from DUGL India to DUGL EMEA I would
1. Install sunshine for s-off so I can change the CID, current MID is the same as EMEA.
2. Change CID from download mode, fastboot oem writecid HTC__034
3. Download and install EMEA ruu
Thanks, MadMungo
Click to expand...
Click to collapse
Is there any particular reason why you wanted to (and subsequently) move(d) from Indian region to EMEA (I am guessing 1 reason to be quicker OTA updates). As far as I know, the Indian ROM doesn't have any bloatware.
That said, if there are any advantages (in terms of performance/battery life/etc) do let us know and I will move too. he he!
SKU 401 is already an EMEA device. He seems to try to change to US Unlocked unless I don't know for what that might be good. In addition this will probably keep to problems on further updates, as he can't change the confirmation of the variant from DUGL to WHL as this won't be altered by S-OFF or any step that could and might be taken.
I'd stay on Indian version 1.27.401.11 and await the upcoming Oreo update.
Sent from my HTC U11 using XDA Labs
Thanks all, but I guess will just wait for the Oreo update for the HTC U11 EMEA from nougat 1.27.401.11 coz I don't seem to find it on the links posted earlier. I don't understand y HTC doesn't just post the RUUs for each CID so that we can do it ourselves coz it seems not to be able to keep up with either the demand or it's own promises
Hey there!
Pretty much what the title says. I want to flash HTC's stock version of Android 8 on my HTC U11 (Unlocked dual SIM, Europe, CID: HTC__034).
From what I've seen there's even an official support page to download the U.S. RUU, but I simply cant find the full stock RUU for the European Dual SIM version.
I'm used to flashing my phone once in a while to do a complete reset, as it usually helps performance and gets rid of all the garbage I no longer need. Oh, and my U11 is completely stock btw.
Thanks!
arnduros said:
Hey there!
Pretty much what the title says. I want to flash HTC's stock version of Android 8 on my HTC U11 (Unlocked dual SIM, Europe, CID: HTC__034).
From what I've seen there's even an official support page to download the U.S. RUU, but I simply cant find the full stock RUU for the European Dual SIM version.
I'm used to flashing my phone once in a while to do a complete reset, as it usually helps performance and gets rid of all the garbage I no longer need. Oh, and my U11 is completely stock btw.
Thanks!
Click to expand...
Click to collapse
Try looking in the spreadsheet.
https://docs.google.com/spreadsheet...evEYtQ_tRcOSJ0vWcvk8a7TK8Hk/edit?usp=drivesdk
jhill110 said:
Try looking in the spreadsheet.
https://docs.google.com/spreadsheet...evEYtQ_tRcOSJ0vWcvk8a7TK8Hk/edit?usp=drivesdk
Click to expand...
Click to collapse
Wow, I found it! Thanks a lot! I remember looking at the spreadsheet a while ago and it wasn't there, but now it is. I didn't think of checking it again. Thanks again!
HTC u11+ 1.24.401.12 (1.24.401.7)
I've looked for my ruu on the spread sheet but can't find it, I downloaded from another article on xda, but it shows opendsp unknown in download section of bootloader, I downloaded again and replaced it & flashed again but it still shows opendsp unknown, I did by sdcard method (1.24.401.7) the flash both times with no bypasses or faults when flashing ,my cid034 and mid is correct too???
jhill110 said:
Try looking in the spreadsheet.
https://docs.google.com/spreadsheet...evEYtQ_tRcOSJ0vWcvk8a7TK8Hk/edit?usp=drivesdk
Click to expand...
Click to collapse
This is a great resource. :fingers-crossed:
Thanks :good:
I'm looking for the Stock North America Radio / WiFi firmware to flash via TWRP.
Otherwise I'll have to use one of those full ROMs then unlock it again, to just get the radio on, to finally be able to flash another ROM.