Related
https://github.com/USBhost/MX_FFmpeg is my modified source where i'm building from
You can download recent codecs here ( GitHub releases ) and 1.35.0-1.8.6 here ( Google Drive ).
Also the XDA download tab is no longer updated as for some reason I cant remove them.
INSTRUCTIONS
1. Check which version you need by going to Local Player Settings/Decoder/General
in the Custom Codec tab it will tell you which one is needed (x86,x86_64,neon,neon64/ARMv8).
Note: skip step 1 if your using aio (all in one) version
2. Download the one you need (No need to unzip it)
3. Go back to Local Player Settings/Decoder/General
and tap the Custom Codec tab then select the version you downloaded. DONE!
Frequently Asked Questions (FAQ) :
What's the difference between MX Player Codec Packs on Google Play and Custom Codec?
MX Player Codec Pack not only contains ffmpeg library, It contains many other libraries required to work properly. If you download MX Player from Google Play mostly it will contain the required libraries according to your device architecture. You have to install codec packs from Google Play only if MX Player asks to install. Custom codec is just a modified version of the ffmpeg library used in MX Player. It's modified to include support DTS/Dolby(ac3) audio tracks. So, Codec Pack is mandatory if MX Player asks to install it. Custom Codec is optional and It's required only if you want to play the videos with DTS & Dolby (AC3) audio tacks
Why Custom Codec is not updated even though MX Player is updated?
In Many occasions MX Player may updated without any changes to ffmpeg library. So, Custom Codec will also remain same. The custom codec version required will be directly forced by the player itself. So no need to worry about it. If it's not compatible MX Player will not load at all.
How do I know that my Custom Codec is outdated & needs an update?
Whenever MX Player is updated, It will check the custom codec version loaded. If it's outdated it will show a error message that shows "Custom Codec is out of date. Replace it with the new version". Otherwise there is no need to check this thread for the new Custom Codecs.
...
...
Thanks man!
I was looking for that!
Thanks. Will try it.
This is just what I was looking for. Nice work.
Re: MX Player Custom Codec With DTS Support [v1.7.11]
Many thanks.
Sent from my Sensation using xda app-developers app
Great, thanks a ton!
Watch the movies in mx player 1080p mkv format with DTS audio and 5.1 audio track.My mobile is moto defy arm v7 1.1GHz
new version
Unfortunately Ive just installed new 1.7.12..... so not working..... Wait for ktsamy
Re: MX Player Custom Codec With DTS Support [v1.7.12]
war1 said:
don´t work with galaxy nexus neon codec for mx player 1.7.12
Click to expand...
Click to collapse
What do you meant?
Can you explain the problem you are facing....
Does not play dts audio or any video?
Have you changed the rendering to HW+ or SW not HW...?
In the latest build of MX Player there is no option in preference to enable SW audio with hw playback.
You have to enable SW audio via audio track button if you are using HW rendering instead of HW+ or SW.
I have personally tested neon build and it is working perfectly.
Even my old build also working with the current version.
Sent from my GT-S5830 using Tapatalk 2
When I go to the Decoder section, click on the directory with the files, then MX Player restarts... I'm getting a popup. This is with MX Player 1.7.12 on a Nexus 4 (4.2.2 stock rooted):
Popup says...
MX Player:
Unsupported device or component file corrupted. Please uninstall the application completely then reinstall it if the problem persists.
OK
When I hit the OK button, MX Player closes and when I reopen MX Player, the codec files aren't selected anymore in the Decoder section. I've uninstalled and reinstalled MX Player a few times, also tried just Force Stop ing it, and clearing its cache, but the same thing happens. This was all working perfectly on 1.7.11, so I suspect it's something with the new version of MX Player, but I don't know how to tell what it is.
funtek said:
When I go to the Decoder section, click on the directory with the files, then MX Player restarts... I'm getting a popup. This is with MX Player 1.7.12 on a Nexus 4 (4.2.2 stock rooted):
Popup says...
MX Player:
Unsupported device or component file corrupted. Please uninstall the application completely then reinstall it if the problem persists.
OK
When I hit the OK button, MX Player closes and when I reopen MX Player, the codec files aren't selected anymore in the Decoder section. I've uninstalled and reinstalled MX Player a few times, also tried just Force Stop ing it, and clearing its cache, but the same thing happens. This was all working perfectly on 1.7.11, so I suspect it's something with the new version of MX Player, but I don't know how to tell what it is.
Click to expand...
Click to collapse
yes don't work with my nexus with the same error.
Nexus 7 the same bug..... Please, fix it, thank you!
Same problem
Having the same issue as funtek on my Neuxs 10 with version 1.7.12 of Mxplayer with this codec, both neon and not, tried them both. Same error message.
Your new link that you have posted when you recompiled the codec must have done it. That download is working for me on mxplayer 1.7.12 with no error message or corrupt codec message on the nexus 10. Weird... but very happy, many thanks brother! Must have just been corrupt.
AW: MX Player Custom Codec With DTS Support [v1.7.12]
I'm on a Samsung Galaxy S2 and the Codec in op wouldn't work.
The recompiled Codec works.
Sent from my GT-I9100 using xda app-developers app
AW: MX Player Custom Codec With DTS Support [v1.7.12]
The exact same message as in funtek's post.
I've noticed that the files in the alternative zip are only half the size as the files in op, perhaps the zip was messed up?
Sent from my GT-I9100 using xda app-developers app
Hi, Neon Codec on Galaxy Nexus: MX Player Pro crash after set the custom codec and restart application. Next time launched MX Player, the default codec is used.
Also tested tegra2 codec on Galaxy Tab 10.1 - this one is working fine.
Hello I've been having one really annoying issue with my beloved MX player which I love which is that the HW+ decoder either tells me it won't play videos I have through Plex app I have stored on computer or that it switches from HW+ to SW and SW doesn't play the videos properly they lag or play out of sync or the app crashes.
Now I know these videos where HW+ fails to work actually has played in the past though I would say that I recently flashed stock sony rom then using CWM flashed a custom rom but I did all this to try get HW+ to play my plex videos where it wouldn't either switch to SW or not play at all when the videos have played fine in the past.
I use MX player 1.7.40 (ARMv7 Neon)
Custom Codec 1.7.32 for AC3 Audio support
Phoenix Final Custom Rom for Xperia P using Nemeis Kernal 6.3
I understand that you guys need the logcat information and I read the thread about how do do that but I ran into a problem that when I downloaded the logcat app for mx player it returns an error "Cannot access the system log"
RyuBlade said:
Hello I've been having one really annoying issue with my beloved MX player which I love which is that the HW+ decoder either tells me it won't play videos I have through Plex app I have stored on computer or that it switches from HW+ to SW and SW doesn't play the videos properly they lag or play out of sync or the app crashes.
Now I know these videos where HW+ fails to work actually has played in the past though I would say that I recently flashed stock sony rom then using CWM flashed a custom rom but I did all this to try get HW+ to play my plex videos where it wouldn't either switch to SW or not play at all when the videos have played fine in the past.
I use MX player 1.7.40 (ARMv7 Neon)
Custom Codec 1.7.32 for AC3 Audio support
Phoenix Final Custom Rom for Xperia P using Nemeis Kernal 6.3
I understand that you guys need the logcat information and I read the thread about how do do that but I ran into a problem that when I downloaded the logcat app for mx player it returns an error "Cannot access the system log"
Click to expand...
Click to collapse
If you are using custom rom, they might have modified the Android Media Framework. It will break the MX Player's HW+. If it's not working Just turn it off & use HW instead.
MX Player 1.8 final is expected to get alternative HW+ engine that may work in most of the devices. Kindly be patient till that
Sent from my SM-G900H using Tapatalk
Hi all,
Having a problem with MX player on an x86 tablet -- I upgraded from 1.7.40 to 1.8.21, and it was a mistake.
MX player 1.8.21 does not recognize the external x86 custom codec I downloaded from xda-developers.com (keeps telling me it wants the 1.8.6 x86 codec), nor does it seem satisfied with the x86 codec downloaded from the play store (settings -> decoder tells me that a custom codec is not in use). Playback is no longer smooth, it is jerky and unwatachable.
I tried to go back to 1.7.40 by downloading the .apk from the MX player website archives, but that doesn't work -- when I run it, it says I need a codec and redirects me to the play store, where the only option is the x86 codec for 1.8.21 which is not recognized by MX player 1.7.40. Even though I have the original x86 codec for 1.7.40, there is no way to get to the settings menu to direct it to the external codec.
So, what do I do to get back to a working MX player? Can I get 1.8.21 to recognize the x86 codec? Or how do I get back to 1.7.40?
Thanks!
internetwasteland said:
Hi all,
Having a problem with MX player on an x86 tablet -- I upgraded from 1.7.40 to 1.8.21, and it was a mistake.
MX player 1.8.21 does not recognize the external x86 custom codec I downloaded from xda-developers.com (keeps telling me it wants the 1.8.6 x86 codec), nor does it seem satisfied with the x86 codec downloaded from the play store (settings -> decoder tells me that a custom codec is not in use). Playback is no longer smooth, it is jerky and unwatachable.
I tried to go back to 1.7.40 by downloading the .apk from the MX player website archives, but that doesn't work -- when I run it, it says I need a codec and redirects me to the play store, where the only option is the x86 codec for 1.8.21 which is not recognized by MX player 1.7.40. Even though I have the original x86 codec for 1.7.40, there is no way to get to the settings menu to direct it to the external codec.
So, what do I do to get back to a working MX player? Can I get 1.8.21 to recognize the x86 codec? Or how do I get back to 1.7.40?
Thanks!
Click to expand...
Click to collapse
I can answer most of my own questions -- it turns out the "mx_x86.zip" from the download section is version 1.9.0 (I didn't notice the "Version information" said 1.9.0, I saw the "currently 1.8.6.1 is named 1.8.6 because MX player expects 1.8.6" above that). I found the correct download in the Google drive link, old version.
However, even with the x86 codec, 1.8.21 still plays video files terribly -- jerky and stuttering.
I found a version of 1.7.40 on apkmirror that didn't automatically direct me to the play store, and it recognized my original 1.7.32.rev1 x86 driver. Now, the playback is smooth.
Also, another thing I've noticed is that subtitle rendering is MUCH worse under 1.8.21 than 1.7.40 -- karoke effects cause the subtitles to be "static" unless "enable SSA acceleration" is checked, but then it looks like the subtitles are rendered to the original video resolution and then scaled with the video to the current window size. This is OK for 720p scaled to 1080p (I have a 1920 x 1200 display tablet), but for DVD resolution (480p) it causes the subtitles to be fuzzy.
internetwasteland;72837147
However said:
Kindly provide a proper bug report. Without logs, it's very difficult to fix the issues.
Click to expand...
Click to collapse
Thirumalai.K said:
Kindly provide a proper bug report. Without logs, it's very difficult to fix the issues.
Click to expand...
Click to collapse
Ok, looking at bug reporting thread now. Do you also want info on the 1.7.40 install that works?
I'd also have to provide the video file -- it's a 1.27GB file, any recommendations on how to send it to you?
Thirumalai.K said:
Kindly provide a proper bug report. Without logs, it's very difficult to fix the issues.
Click to expand...
Click to collapse
Bug report and supporting files have been posted in new thread so that it does not get lost in replies to this thread.
hello,
I might buy the Galaxy S8 Plus ( Snapdragon Model ) soon but need to make sure it can play an h.264 10-bit video using hardware decoding.
name of the video: [1080p][16_REF_L5.1][FLAC_5.1]Suzumiya Haruhi no Shou****su BD OP.mkv
this is a link for the sample video:
https://www.koi-sama.net/files/hi10/
I really appreciate the help, thank you.
I tried them on my Verizon 8+ and get "unsupported video codec" using the default video player.
I have not tried d/l VLC or an alternative to see if that works, it may.
could you please check using mx player h/w+ or h/w
MX Player hw+ doesn't seem to have a problem with any of the sample video decoding, got a complaint about unsupported audio (AC3) on one of the files though.
thank you for your help, I just purchased the phone ( G955U ) and it isn't working on hw+, is there a Rom or kernel you are using?
I'm using bone-stock as provided by Verizon, with all current system updates.
Videos d/l to local SD card and played off that from within MX Player. I noticed some traffic where spawning video playback via file explorer may not work in some cases so I opened the file directly in MX.
The MX Player I used was the free edition, freshly installed.
I have since bought MX Player Pro, and of course it works on my device.
System performance settings are at the default, no tweaking so far (phone is 4 days old).
Good luck, sorry I don't have more help to offer, still new with the device.
thanks for all your help, I really appreciate it.
If you haven't installed their codec pack, get it. I think it will fix your problems: MX Player Codec (ARMv7 NEON)
hello, tried it and didnt work, it does run 4k hevc 10-bit using hw but cant run h.264 10-bit unless I use sw (works well but fast battery drain).
thank you
Runs smooth and without problems or lags with the mx Player pro with the sw decoder. The hw decoder doesn't Work.
i use hw+
along with a custom codec for ac3
Yep custom MX codec canm be found here on XDA forum - use search.
It's up to 1.9.0... Anything older will get an "update codec" message....
I tried but no luck, it works on sw only, what is your phone's model?
mine is G955U Sprint Unlocked. all other codecs work ( even hevc 10-bit 4k ) but h.264 10-bit is only working on sw.
How do you setup the custom codec for AC3 (I recognize I'm being lazy by just asking...but I have a headache...)?
For C0derbear
Put on root directory of phoner or sd card and start MX player. Go to settings, and select "custom codec at bottom of list in decoder settings. Select codec with browser it opens.
That's if it doesn't detect the custom codec and ask to use it.
It will restart to apply codec...
I have a Samsung Galaxy Note 10.1 - 2014 Edition tablet running Android version 4.4.2.
I purchased MX Player Pro in October to play some videos on the tablet and everything played well. Today I noticed that those same videos do NOT now play. Instead I get a message that says "Mpeg2video not supported". Needless to say ... this now you see it ... now you don't is beyond frustrating.
So I uninstalled and re-installed the MX Player Pro app, and still get the same error. I suspect that some recent updates might be cause but I cannot be sure as updates happen automatically usually. I would appreciate some advice on troubleshooting this problem.
Try the custom codec. It adds back functionality the developer took away.
https://forum.xda-developers.com/showthread.php?t=2156254
Sent from my official carrier unlocked LG V30+ US998
I have a new Lenovo Tab 4 with Android 7.1.1, Snapdragon 625 and lots of mpeg2 videos and just installed MX Player. Which codec version should I use?
hellsing71 said:
I have a new Lenovo Tab 4 with Android 7.1.1, Snapdragon 625 and lots of mpeg2 videos and just installed MX Player. Which codec version should I use?
Click to expand...
Click to collapse
If you're not sure what kind of chip you have, the "All in One" file works for all. It's just bigger.
Download to storage, go into app settings and point the decoder to that file.
Sent from my official carrier unlocked LG V30+ US998
I'm interested to know how you go once installing the custom codec, there's a thread here:
https://forum.xda-developers.com/apps/mx-player/mx-player-pro-build-1-9-5-dropped-mpeg2-t3664814/post73588097
Where I am discussing poor performance once the codec is installed.