Hi All,
First I hope I am posting at the good place , otherwise please notice me and of course move it at the good place :angel:
It is about a week or so, that I have my GNote3 - SM-N900 stuck on the animated Samsung logo and heat a lot. Since a while the phone is randomly freezing and reboot .. I got used to it and restarted it each time..
It happened suddenly after it has, again, rebooted alone..
I have never tried to change the ROM or the bootloader and either rooting, It is a full stock from Orange.
Here is a short video when I try to reboot the phone.
What I already tried without any success :
- Take off the batteries and wait between 30 sec to all the night.
- Under recovery, I cleaned the cache partition.
- getting into safe-mode, but the phone does not accept the said sequences, ON button + Volume up (when Samsung Galaxy Note3 is on the screen... Instead it continuously keep rebooting as the ON button has to be keep hold.
I wish to not wipe my data as I need to migrate those into my new Note8 :silly: ..
I have been told in another forum that there are stock roms that allow that, but I have no clue about how to identify which ROM is not wiping and as I am under Linux 14.04, which files I need to load in Heimdall (I have v1.4.2).
So before getting live with the Note3, I wish to try on a S4 (GT-i9506) at least to make sure the process is not wiping..
Here is the details of the 2 phones - both are under Android 5.0.1:
GNote 3 :
ODIN MODE
PRODUCT NAME: SM-N900
CURRENT BINARY : Samsung OFFICIAL
SYSTEM STATUS : OFFICIAL
REACTIVATION LOCK : OFF
Secure Download : Enabled
KNOX WARRANTY VOID : 0
AP SWREV : A4
Galaxy S4:
ODIN MODE
PRODUCT NAME : GT-I9506
CURRENT BINARY : Samsung Official
SYSTEM STATUS : Official
KNOX WARRANTY VOID : 0x0
QUALCOMM SECUREBOOT : Enable
AP SWREV : S1, T1, R1, A1, P1
SECURE DOWNLOAD : Enable
UDC START
I hope my description is at least clear..
I wish to thanks all of you that will take time to read and help :good:
EDIT : Language is French.
Bump...
So I rooted my phone a few months ago using SU, and i was trying to install rootcloak yesterday which required xposedinstaller. After installing it I tried to update it (v82 i think). After a few seconds my phone shut off and all i could see was the blue light. When I tried to open it it just showed me the Samsung galaxy s6 logo, now it only shows the Samsung one. The only menu that opens is the download custom os one. If i press down to restart it just shows me the samsung logo again. If i press up it shows "Downloading".
Odin Mode
Product Name : SM-G920F
Current Binary : Custom
System Status : Custom
Reactivation Lock : Lock
Secure Download : Enabled
Knox Warranty Void : 1 (0x0500)
RP SWREV: B:5 K:2 S:2
Can i do anything without a PC? I only have access to my library's PCs which don't allow me to install programs and my sister's Macbook Pro 2011. The Mac's charger is broken so i have to wait a few days for the new one to come so i can use it.
I've been trying to root my A3 as I want to be able to enable adoptable storage. I've been bitten by the various protection methods and now the phone won't boot as I get a green screen with a white triangle and the text:
An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.
I'm trying to use Odin to flash the standard image but I don't appear to have found the right one as Odin fails after a few seconds and the following is shown on the phone download screen:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-A320FL
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: ON
Secure Download: Enabled
CCIC =
WARRANTY VOID : 1 (0x0500)
AP SWREV: B:2 K:0 S:0
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1 <--- This line appears after running the flash
Can someone tell me where to find the standard ROM or how I can fix the phone in it's current state.
Thanks,
Steve.
How to restore the standard firmware
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Hello all,
I have flash TWRP in a SM-G955N and phone rebooted before flashing RMM State Bypass and No-Verify OPT.
Since that reboot, ONLY OFFICIAL RELEASE BINAIRIES ARE ALLOWED TO BE FLASHED error appears in recovery and download mode.
In developers options, OEM Unlock and Usb Debugging are ON. Automatic update is OFF.
Here are informations about ODIN screen :
DOWNLOAD SPEED : FAST
PRODUCT NAME : SM-G955N
CURRENT BINARY : Samsung Official
KG STATE : Prenormal
FRP LOCK : OFF
OEM LOCK : OFF
Secure Download / Enabled
CCIC = S2MM005 hw: 6 boot: 7 main: 43SWREV: B:4 K:4 S:4
Please, Could someone help me change that KG STATE to checking or anything else that allow flashing custom roms?
Seems that putting a sim card on phone, activate it and allow the phone to stay connect to carrier and internet for 7 days reset KG STATE back to normal mode.
Is this information real?
Thanks in advance for any kind of advice.
Hello all.
A little up. Can anyone help with this issue please?
I have the same situation, up
yessade said:
Hello all,
I have flash TWRP in a SM-G955N and phone rebooted before flashing RMM State Bypass and No-Verify OPT.
Since that reboot, ONLY OFFICIAL RELEASE BINAIRIES ARE ALLOWED TO BE FLASHED error appears in recovery and download mode.
In developers options, OEM Unlock and Usb Debugging are ON. Automatic update is OFF.
Here are informations about ODIN screen :
DOWNLOAD SPEED : FAST
PRODUCT NAME : SM-G955N
CURRENT BINARY : Samsung Official
KG STATE : Prenormal
FRP LOCK : OFF
OEM LOCK : OFF
Secure Download / Enabled
CCIC = S2MM005 hw: 6 boot: 7 main: 43SWREV: B:4 K:4 S:4
Please, Could someone help me change that KG STATE to checking or anything else that allow flashing custom roms?
Seems that putting a sim card on phone, activate it and allow the phone to stay connect to carrier and internet for 7 days reset KG STATE back to normal mode.
Is this information real?
Thanks in advance for any kind of advice.
Click to expand...
Click to collapse
No need to waste 7 days. Its not working. KG State remains PRENORMAL after 171hours
change date
1. change the date to 8 day earlier and check software update let it find update or download 1 % then stop update
2. turn off OEM option
3. turn off developer option
4. turn it on again
5. turn on OEM
6. restart phone
7. come back to date and change it for 10 day earlier
8 . check software update and stop it
9. restart phone to download mode
Paranormal should change to official or custom
Hello,
i got S8+ (SM-G955F), it had android 7. i tried to flash an android 9 firmware, i was unware and i flashed a random csc firmware (AP only). i dont know whats my phone csc , but in download mode i got (carrier_id=bri).
after flash ,the phone shows samsung logo and keeps restarting (+vibrate) in endless loop, the only thing i can access is download mode. ofc i panicked and tried to flash BL too, and i realized that i flashed binary 12 bootloader , which means i cant go back to android 7 even if i find original flash file for s8+ .
i tried different firmwares from different CsC , i tried : Xeu , PHE, BRI,MAT.
nothing works. i need help , i hope its not hardware .
GUYS ANYONE HAS THIS ISSUE AND SOLVED IT PLEASE HELP ME OUT ,ALL YOUR REPLIES ARE MUCH APPRECIATED.
Write what firmware is currently on the phone and provide a link to the odin version you used.
ze7zez said:
Write what firmware is currently on the phone and provide a link to the odin version you used.
Click to expand...
Click to collapse
okay , if you mean the last firmware i flashed , this is it;
Download Galaxy S8+ SM-G955FD (BRI) G955FXXUCDVG4 in Samfw - Samsung firmware download
Galaxy S8+ SM-G955FD (BRI - Taiwan) G955FXXUCDVG4 Pie(Android 9) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
and i don't know whats original flash for my phone cuz i didnt check before flash.
the version of odin i used is odin3_v3.14.4 , here is the link of it :
Odin3_v3.14.4.zip
drive.google.com
PS : i flashed other flashes before this using odin 3.13.1. do you think it can affect the process?
I didn't ask what you flashed, but what firmware is currently on the phone.
Show screen in download mode.
You can see from the firmware link that Odin 3.13.1 is recommended.
ODIN MODE
DOWNLOAD SPEED : FAST
PRODUCT NAME : SM-G955F
CURRENT BINARY : SAMSUNG OFFICIAL
FRP LOCK: OFF
OEM LOCK: OFF
Secure Download: Enabled
CCIC = S2MM005 hw: 6 boot: 7 main:41
Carrier_ID= BRI
Warranty Void: 1 (0x0030c)
RP SWREV: B:12 K:11 SS:11
DID:= 030C8ecc51c2
EVT 1.1
LOT_ID= NBUX2
CHIP_ID= 030c8ecc51c2
nASV_Table_Version:8
nASV_Group_CPUCL0: 5
nASV_Group_Cpucl1: 7
nASV_Group_G30: 3
nASV_Group_MIF: 8
nASV_Group_INT: 8
nASV_Group_CAM_DISP:8
nASV_Group_CP:8
nASV_Group_PMIC:0
nASV_Group_PMIC_CP:0
PMIC_ID= 2(e4)
LPDDR4 manufacturer= Samsung
LPDDR4 process ver= D18
LPDDR4 size : 4G Downloading... Do not turn off target Volume Down
Key+Power Key for more than 7 secs: Cancel(restart phone)
Thats what on my phone download mode.
No!It is not it!
Look at 1:11
ze7zez said:
No!It is not it!
Look at 1:11
Click to expand...
Click to collapse
my phone's quality is bad i tried to take pic but its not clear , so i wrote down what i saw in download mode.
this is all the info typed.
ODIN MODE
DOWNLOAD SPEED : FAST
PRODUCT NAME : SM-G955F
CURRENT BINARY : SAMSUNG OFFICIAL
FRP LOCK: OFF
OEM LOCK: OFF
Secure Download: Enabled
CCIC = S2MM005 hw: 6 boot: 7 main:41
Carrier_ID= BRI
Warranty Void: 1 (0x0030c)
RP SWREV: B:12 K:11 SS:11
DID:= 030C8ecc51c2
EVT 1.1
LOT_ID= NBUX2
CHIP_ID= 030c8ecc51c2
nASV_Table_Version:8
nASV_Group_CPUCL0: 5
nASV_Group_Cpucl1: 7
nASV_Group_G30: 3
nASV_Group_MIF: 8
nASV_Group_INT: 8
nASV_Group_CAM_DISP:8
nASV_Group_CP:8
nASV_Group_PMIC:0
nASV_Group_PMIC_CP:0
PMIC_ID= 2(e4)
LPDDR4 manufacturer= Samsung
LPDDR4 process ver= D18
LPDDR4 size : 4G Downloading... Do not turn off target Volume Down
Key+Power Key for more than 7 secs: Cancel(restart phone)
Sorry, this model displays firmware in recovery mode.
www.youtube.com/watch?v=y4Y_eC64D9c
i cant get in recovery mode , so i guess im stuck for good.
I have soft bricked my phone, I wasn’t sure if my boot loader was unlocked and I used adb fast boot to go to twrp and flashed a custom rom, and twrp recovery, since then, no firmware info is displayed on the download screen, and everything I do to restart the phone, it just goes back to the download screen and stays there, please someone help me, I’ve been staying up nights to fix this but I keep flashing different csc firmware but none of them are getting flushed through Odin. I’ll be forever indebted to you, it’s my sister’s phone and I can’t help but feel guilty and the mental stress is too much. Please someone reach out to me