CPB File - General Topics

Can someone help me , about unpacking and packing of CPB File ? stock rom of 360N5 or china phones. Itried the tut about the Unpacking.exe here in the forum but after Packing again the CPB file. The QGDP says the CPB file is old and cannot be downloaded.

Related

[Q] How can i flash a phone with .bin file ?

Hi, i've downloaded a ROM for my phone and it doesn't has the scatter file and img files, just a .bin file, how can i flash my phone with this file ?

[Tool] unpack Repack nb0 Rom

***********************Unpack Repack nb0 Rom******************
Here Is a nb0 tool that unpacks and packs SUT nb0 factory images Used By Some manufactures like Infocus,
Requirements-
Window pc with java Installed
How to unpack
1. Paste your stock Rom File, something.nb0 in Tools Folder
2. Rename it to firmware.nb0
3. Run unpack.exe file hit enter , Done, check unpack Folder Your extracted Rom IS Present,
How To Repack-
1. cut whole Rom From unpack folder and paste in Repack Folder[ you can edit your images],
Like System app etc, don't change name]
2. Run Pack.exe hit enter Done,
3. Your New Rom Is readdy with the name System.nb0 in tools folder
Downloads-
MOD Edit :- Links Removed
bro after i unpack firmware.nb0 file theres no file that related to system.img.???
Incomplete unpacking
Sir please help to completely unpack nb0 file as sut is not working nor my phone's flashier with scatter file is available online. My phone is Infocus m330 with mediatek mt6592 chipset. It's bootloader locked with hard brick that not showing any sign of active other than when connected to pc can be flashed with v com drivers
Please help
Going to test it now ?
Thank you mate
link is dead
Thread Closed.
Thanks
SacredDeviL666.

Help: How to convert .tar.md5 file to .img file

I have the stock boot image file of SM-G955FD Oreo (8.0.0) Indian firmware
in .tar.md5 format I need it to be converted to .img as .tar.md5 format is not supported by MagiskManager for patching.
Here is the stock boot image of SM-G955FD Oreo (8.0.0) Indian firmware :
http://www9.zippyshare.com/v/HVR3TIEb/file.html
Please any body provide me this boot image file in .img format or tell me an easy way to do so.
Thanks a lot in anticipation!
You don't convert .tar.md5 files into .img. .tar.md5 is just a regular tar archive (ustar format) with md5 checksum appended to it. You can unpack it as any other tar archive, it contains the device images you are probably asking for.
Oreo images are lz4-compressed, so you also need to decompress them, after that you will be left with usable .img files for different partitions.
Edit: Here's G955FXXU1CRB7 boot.img
Can you give me link to Galaxy S3 SGH T999N boot.img please

MTK Firmware Backup & Extraction ( All Partitions )

Acquire a similar scatter file for another device.
Use ADB to extract Partition information.
Edit similar Scatter using ADB and Device for Reference's.
Add the Partition information into the similar scatter.
Test scatter file for proper PMT & HW Chip ID.
Error & Repairs for HW ID Mismatch & PMT Changed.
Test Error repaired scatter to extract Preloader.
Extract preloader from BOOT_0.
Test Preloader with boot.img extraction & download.
Save Scatter file & Preloader into a safe place.
Use Scatter & Preloader for Memory Test.
Use Memory Test information for Read back of entire Memory.
Save Full Read back to a safe place.
Extract System.img, Boot.img, Recovery.img, NVram.img, NVDATA.img, frp.img, Etc.
Compile Firmware for SP Flash Tool.
Edit & Remove proprietary information from firmware for custom release.
Leave stock for stock Firmware extraction.
For Pure time consumption reasons, this guide may take me a while to complete, however the steps above should give you a rough idea of how everything is going to be written...
To start with, the information is so much at once, that I've made a video to help people go along with it...
The video is in 2 parts & in English... Please watch these first, that'll cover about everything in the steps except a few things like compilation of extracted IMG files.
The second video should be watched after the first video, so I've put that link in the description of video 1.
https://youtu.be/e2_U68EGSlY
OK... Now you've seen the instructions, you can work through extracting every partition you'll need for a firmware backup.... You don't need all of them !
After that, Copy the following files (you should now have them all ) to a new folder called Stock Firmware for SP Flash Tool ..
boot.img
cache.img
lk.img
logo.img
preloader.bin
recovery.img
secro.img
system.img
trustzone.bin or .img
userdata.img
MT*****_Android_scatter.txt
Now you need to edit the Scatter file using NotePad++ or another program that won't wreck line endings... Word pad & Notepad will wreck line endings and destroy the scatter file.
Edit the scatter file to now have the correct file names, eg.....
preloader_******_njh_gjb_.bin TO preloader.bin - The same as your copied file name.
boot_example_mt.img TO boot.img - The name of the file for boot.
Now the scatter file, Image's & Preloader should be all together...
ZIP the folder to remove empty space in .img files, Shrink the Firmware to a Zip file.....
You just need to extract the zip file and open the scatter file in SP Flash Tool v5.16+ .. Then select Download to do a firmware installation.
I will edit this guide in time, however I just wanted to get out how I do this on my MTK Device's... People keep asking me how to do it, so I released the video and this extra information for them... I don't make money on YouTube so everything here is provided free & I don't make any money from helping !!! Sorry about the terrible audio !

Convert .ofp file to .ops for OnePlus phone

Hello , I have kb2007export 11 c.42 file , but I don't have msm id , I want to change .ofp file to .ops , I have extracted the .ofp file but I can't repack this in .ops file , I have also tried oppo decrypt tool from github , but I can't repack to ops for me , do you know how can I do thjs

Categories

Resources