I recently gave this cell phone and wanted to force the update of this, so I installed an update apk and after this I jumped an update to 5.1 and all right until I realized that I did not read the SIM and the IMEI was "0 "
Then I got scared so I started to research and I got to learn a lot from the rom system, recovery, adb, fastboot. the first time I connected my cell phone was AFTER updating the firmware and simply the pc did not recognize the mobile, I did not see any notification or anything, as if nothing was connected. I need you to help me install the drivers, please be patient and I will be aware of any response. Thank you.:crying::crying:
Baseband version:
MSM8626_1032.3116.98.00a MOVSTLA_CUST
System version:
221.201.2 falcon_umts.Movistar.en.PE tefla
Related
Hello Respected Members,
I've searched a lot about my issue of g3 but can't find the solution or right answer. So I've an AT&T LG G3 which is great no doubt but I saw on the official site of AT&T that they've released the lollipop update for LG G3 on February but when I checked update through mobile it say's I've latest version of software which is 4.4.2. Software information is below
Android version : 4.4.2
Baseband version : MPSS.DI.2.0.1.c1.13.00009-M8974AAAAANPZM-1
Kernel version : 3.4.0
Build number : KVT49L.D85010f
Software version : D85010f
One Thing More, I've zero info about rom, cutrom rom, bootloader,etc
so I really appreciate if any one help me with this that is my phone have any root access or lollipop hasn't arrived for my phone yet?? I saw there is no SU here in my phone not in hidden applications also.
Please help me with this as all people around the world has solved their queries about their phones here....>
THank You!!
Where'd you get your phone? And do you have an AT&T SIM in your AT&T LG G3? Are you in the U.S.?
mudassar_ali said:
Hello Respected Members,
I've searched a lot about my issue of g3 but can't find the solution or right answer. So I've an AT&T LG G3 which is great no doubt but I saw on the official site of AT&T that they've released the lollipop update for LG G3 on February but when I checked update through mobile it say's I've latest version of software which is 4.4.2. Software information is below
Android version : 4.4.2
Baseband version : MPSS.DI.2.0.1.c1.13.00009-M8974AAAAANPZM-1
Kernel version : 3.4.0
Build number : KVT49L.D85010f
Software version : D85010f
One Thing More, I've zero info about rom, cutrom rom, bootloader,etc
so I really appreciate if any one help me with this that is my phone have any root access or lollipop hasn't arrived for my phone yet?? I saw there is no SU here in my phone not in hidden applications also.
Please help me with this as all people around the world has solved their queries about their phones here....>
THank You!!
Click to expand...
Click to collapse
Before you muck about with your phone, go here and read up. You do need some basic info so you have less chance of surprising yourself if something goes wrong. It has excellent info.
http://forum.xda-developers.com/att-lg-g3/help/frequently-questions-att-lg-g3-d850-t2958216
Following that, fundamentally, I'd do a clean install. You will lose your phones data, unless you save via Titanium, or the like. You can get the LP files, et al, from here:
http://forum.xda-developers.com/att-lg-g3/development/rom-20f-stock-rom-debloated-t3059610
1. unlock the phone via PC/ADB, then adb flash TWRP.
2. reboot phone, copy following files to phones external SD card (hope you have one)
modem
ROM
SuperSu
TWRP (already done but I do it anyway)
3. reboot to recovery and select the 4 files above from the install menu. I use the order above and works perfectly. Slide to install. Reboot into your system after the install. The initial install is very quick, after you reboot your phone to system, it will take some time to fully finish the install, 10 minutes or so.
4. Done. You will not have a direct menu to enter recovery after that, but get "Quick Boot" from PS, and that solves that.
This is how I've been doing LP, and no issues. I tried a dirty install, and had the same functionality as a clean install, except the dirty install had an Antutu of 23K. Previous I had an Antutu of 35-36K on KK. With a clean install on LP I have an about 40K.
.
HI, Did you upgrade to android 5.0 at the end as I'm stuck in the same situation?
:crying:
My issue is quite complicated. Please be patient and read on.
Less than a week ago, I bought an LG G3 D855. It wasn't brand new and definitely out of warranty.
It was on the 4.4.2 Os version but I couldn't update it because I couldn't locate the UPDATE CENTER and after some research online, I found out it was because it was rooted. I couldn't find a Supersu application anywhere on the phone anyways but Root checker confirmed that it was rooted.
I downloaded the stock kitkat firmware in a .tot format and I tried flashing using LG Flash Tool for TOT but it failed because "Device version is different"
I checked the Imei online and it stated that the device is a Sprint LS990 but the details embedded in the phone all say it is D855
I checked online and found a couple of posts about this error and one user said he was able to fix it by flashing the actual Sprint .tot with the lg flash tool. I tried that but it didn't work. It still said "Device version is different. Check BIN or dll"
I checked online and found results pointing to a generic .dll file for G3s and I downloaded it but when I used it on the Flash tool, it resulted to an error "CrossDL blah blah"
So I found a Marshmallow kdz file. LGUP won't see my device model so I was able to flash it after editting the software in my build.prop to D85510n.
***I have always changed the port to COM41 in all the steps I used
The LG UP detected my model and it flashed to 100% but got stuck on a bootloop by loading the lg screen, freezing and restarting by it self. It never gets to the homescreen.
I downloaded lollipop kdz reflashed using LGUP in a form of downgrade and it got to 100% and got stuck at the lg screen while trying to reboot.
I redownloaded the stock kitkat rom and used the Lg flash tool but it failed. It said 'PID null IMEI Null"
I used LGUP to reflashed. It came to my understanding that the LGUP can flash both kdz and tot. So it flashed to 100% but got stuck at the lg screen and I have tried all I can but it is stuck. It can go into download tho. I don't know what to do about the IMEI. I don't know if the last flash retrieved it. I don't kniw what to do.
It no longer shows as LGE AndroidNet USB Serial
Please can anyone help me?
I just need my phone to work again. I was stubborn and now I regret it. I should have just stuck to kitkat. I'm so desperate to get my phone working that I wouldn't mind Android Froyo Os if it was ever possible.
PLEASE HELP!!!
I also had some what same problem with my old lg device ... Here's what you can do:-
Download any custom rom of your lg g3 Like Cyanogenmod and flash it via recovery.
Recovery can be stock or custom it doesn't matter.
Remember to wipe dalvik cache and wipe data before flashing the ROM. I did it and my device was working fine.
Remember that first boot
always takes 2-3 mins so be patient.
Sent from my Aqua Trend using Tapatalk
Hi all,
I tried to update my Motorola Moto G 2014, but it showed status 7 error. So I contacted Motorola and they said that I rooted my phone. So I connected my phone to my PC and found supersu246.apk. I never installed this, but I guessed somehow some app rooted my phone once. I began thinking and suspected it was when I was desperate to recover my lost photos and downloaded all sorts of programs (possibly Dr. Phone).
So: I deleted supersu246.apk from my internalized SD card and factory resetted my phone. Status 7 still pops up. How do I fix this? I do not want to have a rooted phone btw.
Should I follow the instructions in this link: https://forum.xda-developers.com/moto-g-2014/general/official-firmware-titan-xt1068-t3312933 or not?
And specifically the Easy installer attached in the first post at the bottom: it says: 'easy installer.zip to flash your firmware in one click. This also has an option lock or unlock bootloader and warning logo fix.'
Android 6.0
Smalband: MSM8626BP_1032.3116.99.00R EMEA_DSDS_CUST
Kernel: 3.4.42-gef77327
[email protected] #1
Wed 6 jan 12:29:54 CST 2016
System: 24.41.34.titan_retaildsds.retaildsdsall.en.03 reteu
Build: MPB24.65-34
BTW I AM A NOOB!!
LXXV* said:
Hi all,
I tried to update my Motorola Moto G 2014, but it showed status 7 error. So I contacted Motorola and they said that I rooted my phone. So I connected my phone to my PC and found supersu246.apk. I never installed this, but I guessed somehow some app rooted my phone once. I began thinking and suspected it was when I was desperate to recover my lost photos and downloaded all sorts of programs (possibly Dr. Phone).
So: I deleted supersu246.apk from my internalized SD card and factory resetted my phone. Status 7 still pops up. How do I fix this? I do not want to have a rooted phone btw.
Should I follow the instructions in this link: https://forum.xda-developers.com/moto-g-2014/general/official-firmware-titan-xt1068-t3312933 or not?
And specifically the Easy installer attached in the first post at the bottom: it says: 'easy installer.zip to flash your firmware in one click. This also has an option lock or unlock bootloader and warning logo fix.'
Android 6.0
Smalband: MSM8626BP_1032.3116.99.00R EMEA_DSDS_CUST
Kernel: 3.4.42-gef77327
[email protected] #1
Wed 6 jan 12:29:54 CST 2016
System: 24.41.34.titan_retaildsds.retaildsdsall.en.03 reteu
Build: MPB24.65-34
BTW I AM A NOOB!!
Click to expand...
Click to collapse
I can see you have already posted this in the correct forum here
https://forum.xda-developers.com/showthread.php?t=3539457
so I will close this one up and let you continue your journey there
Good Luck
Sawdoctor
I recently bought a ROG Phone 5s here in Japan, and it came on the WW-18.1220.2111.164 firmware.
I got into a bootloop trying to mount as readwrite, and the problem got worse until I was at a seeming brick with black screen. But I saved my phone using johhny886's guide here.
Upon flashing the firmware he provided, my phone is now back to normal but on WW-18.1220.2109.126.
System update checks and says "Your system is up-to-date." I tried a factory reset and interestingly it keeps me on WW-18.1220.2109.126.
WW-18.1220.2111.164 is downloadable from ASUS's website here and it comes in a zip file. How do I manually install this? Or can I?
There is also a newer WW-18.1220.2112.175, but it says "This firmware is only for ROG Phone 5S/5S Pro ID version". I thought about going to this newest version but that message scares me since I don't know what ID is here. WW-18.1220.2111.164 listed as "WW-18.1220.2111.164 for WW/EU/TW/JP version only." Device's country is listed as JP so I figured it's safer to go back to this.
Place that zip file you have downloaded in your phone internal storage (not inside any folders). Once you have placed it in the root of your internal storage just restart your phone. After restart unlock your phone and it will automatically detect that update file within a minute and ask you to update.
The ID version is Indonesian version. So choose JP version for you always.
I just did that and successfully updated as you posted. Somehow as soon as I go to post online I figure stuff out lol.
Thank you for the assistance, I was afraid and wanted to be careful.
Hi all !
Hope everyone have a great day, i have got a samsung galaxy A6 US variant TMB, (SM-A600T) with android version 9, I was trying to root the phone but didn't have the knowledge that this phone can't be rooted because of locked bootloader which can't be unlock with any procedure. So i gave up and just updated my phone to the latest version available of PIE . (Android 9), To tell you more, before it was also on the same version of android 9 but earlier date. I have not updated a whole version of android but just to a latest date of android 9, Android 10 is also available for this phone but i haven't done that yet. The main problem with my phone is that before this update i just needed to charge my phone once in 24 hours, and now after update i need the same phone with same demands to charge it 3 times in 24 hours, Did every optimization for battery, unused apps, extra apps uninstalled, just one google account left, synchronization is off, NFC and near scanning is off, Bluetooth / Wifi is off, GPS is off. Auto update for apps and system software is off. Battery saving mode is enabled, clear cash has been done, factory reset is already done with flashing this version of android with odin tool, and etc every other thing has been tried with no luck, please don't advise for these things as the main problem for me is just the android version itself which i have newly flashed. Because of locked bootloader i can't flash back my older version of android 9 with odin tool, phone gives error of bootloader :
sw rev check fail device 2 binary 5something like above after many tries the same result. tried my old firmware with the new bootloader but still no luck. (Same error). Any help or suggestions will be greatly appreciated. I am thinking what if i extract the AP of the new flashed firmware and replace the system.img.lz4 with my old firmware's system.img.lz4 to trick the phone and reflash with the new firmware but old system image file, Can this be done ? or i may brick my phone for ever ? what if i take my phone to the outside market and request a z3x flash for the old firmware version ? will that work ?
Please give any accurate solution i really want my old phone back, this locked bootloader has become a really annoying thing for me. I will never buy a phone like this which bootloader's can't be open again. Or if i wasn't able to flash this to my old version i will never use android again in my life, Better option will be to buy an iphone after 17 years of android use.
Thanks in advance.