Icons back to standard - Xiaomi Redmi 6 Questions & Answers

Hi, good afternoon, I'm having a problem with an icon pack, always return to the default after exiting the settings, as well as the source applied by MiCustomFont.
I tried to replace the native source folder with the same rooted device I did in previous versions of MiUi and did not succeed.
The only source I could change was NotoColorEmoji.
Right now I'm downloading the system to flash MiFlash, but before I change the source folder with the source I want along with emojis, (because I had a problem after root not recognizing the sim card and I needed it reinstall by TWRPto global rom)
A third problem is a problem that even seen here in the forum could not find a concrete answer, I need to fix the TWRPin my cell phone, because the procedures taught are difficult and depend on the luck of the person to start TWRP.
Please,
Thanks!
Breno Leoni

I found a different solution for installing fonts, different from when I just copied the folder with the fonts I wanted all renamed by a default to the system / fonts folder, it used to be okay, today in MiUi 10 not.
I got an installation of Emoji Unicode via TWRP, I changed NotoColorEmoji to one of my liking and I added my standardized source pack properly renamed with the name of the fonts that MiUi uses and it worked, I'm satisfied, this way is the most efficient to change cell phone fonts..
Now I just need to think about a solution to the problem. Icons do not return to the default and can fix the TWRP in the memory of Redmi 6

Related

[ROM]DocHoppyRom NEXTBOOK 7 Premium*updated DocHoppyRom Full On Rootv2.0*2/14/2012

I was working on a ICS based hoppy rom. Unfortunately I just had a catastrophic screen failure, apparently when my laptop bag fell last night, it landed with enough force to shatter the screen on my nextbook! Oh well. it may be a while before I can work on anything to further the version I was working on.
FYI- Due to work, my time is very limited for working on the next version of Hoppy Rom. I apologize in advance. The company I work for is
setting up new engine test cells in China, and my self and 2 other people are main points of support! again Sorry for anything new taking so long!
DOCHOPPY HAS BEEN SIGHTED (Other than on a DAYZ server...Stay tuned.
Ok I have decided to pass along what I have been working on.
Warning***
This is for the Nextbook 7 premium ONLY!
Known working on Nextbook 7 premium tablets with serial numbers starting:YF1011
DocHoppy Presents!
DocHoppyRom Full On Root v2.0
and
DocHoppy Cramfs Style 3.0
Based off the official update image released by nextbook.
Major thanks to FINLESS BOB!!! GREAT HELPFUL GUY!
PRESENTING DOC HOPPY ROM
CRAMFS STYLE 3.0
AND
FULL ON ROOT v2.0
Disclaimer: I am not responsible for Bricked Tablets. This is known to work on tablet with SN starting with YF1011, and some YF1211.
First you will need to decide which version of the Rom you are going to load. The CRAMFS Style version has SU but you CANNOT write to the /system directory. This is a good all around Rom for those who may need SU but do not need to write to /system.
Full On Root is just that, you have full read write to the /system and can customize the Rom to your hreats content.
HOW TO INSTALL:
TO FLASH CRAMFS STYLE 3.0 Put the UPDATE.IMG file from the Cramfstyle Folder onto your SD card, while tablet is on and follow the on screen instructions.
After running the self extracting Zip file you will have a directory containing the following folders and files.
Drivers (folder)
CramfsStyle(folder)
FullonRoot(folder)
Log(folder)
Language(folder)
Readmefirst.txt
Rkusb.log
RkusbComm.dll
Setting.ini
RK29update.exe
TO FLASH CRAMFS STYLE 3.0 Put the UPDATE.IMG file from the Cramfstyle Folder onto your SD card, while tablet is on and follow the on screen instructions.
To flash Full On ROOT, Plug your nextbook into your PC via usb cable. Turn your nextbook over and with a safety pin or something of similar size, press and hold the reset button for 2 to 3 seconds.
Run the RK29update.exe
Select your Rom files via the boxes containing the .... And navigate to the correct directory for the rom you want to install.
Insert eache file in order according to the update tool.
Clear IDB. (this is like a lowlevel format for the Rom tool:
After the Tool says OK. Select Run. This will begin to load the Rom onto your tablet. It will go through loading and then checking the Rom install.
After the Rom loads and the tool comes back with an OK, patiently wait for the tablet to reboot, and load the new ROM. If the tablet is still connected to the pc via USB when the rom boots it will show the screen allowing you to select weather or not to turn on USB storage. Press the home key and you will be given a choice of Golauncher or Rklauncher. (go lock is a screen lock program.)
Enjoy the Rom!
Disclaimer: I am not responsible for Bricked Tablets. This is known to work on tablet with SN starting with YF1011, and some YF1211.
Features for both Roms:
Complete and correctly working market. It now correctly associates the tablet to your gmail account allowing purchases from market.
Launcher 3.0 as well as Go launcher ex. Launcher 3.0 was pulled from an rk2918 firmware3.0 update and put into this rom.
Google Calendar is now back and working correctly.
Original Email is back and working correctly.
Included Kindle App
Included Estrongs file explorer.
Both have SU though the Cramfs version cannot write to SW.
Removed Apps Added in last release and return to more of a original rom state.
Rom is pretty clean. And seems speedy.
Cramfs Style 3.0 Rom has 200mb internal Ram +/-
Full On Root 2.0 has 894MB of Free Internal Ram.
Cheers!
DocHoppy
www.freaktab.com
Keep in mind this is the first version of this ROM. There will be updates and changes made.
FUTURE CHANGES:
Custom Theme Changes.
More Tweaks to the system.
Long Term Wants:
Power Menu change to include recovery boot.
Power Menu change to include restart.
This is a work in progress.
Known working on Nextbook 7 premium tablets with serial numbers starting:YF1011
Linked here for image.
Non Add Showing Link.
DocHoppyFullOnRoot2.0
New Cramfs style Rom is still Available Here.
DocHoppyCramfsstyle3.0
To install DocHoppyRomv3.0, rename .img file to update.img, download update.img file, copy to SD card, and follow the prompt.
DocHoppyCramfsstyle3.0
Enjoy.
Disclaimer:
Not responsible for bricked tablets.
Enjoy!
Also visit www.freaktab.com
So freaking sweet, great work on RW!
I used Wendal's tool to decompress the cramfs file system.
As for the /system, Because the device uses cramfs, and based on everything I have read, using Wendal's tool to decompress the file system, make the changes, and compress is the only way I can see to be able to
customize the rom for the device. The image is rooted, but after the update.img is compressed, the /system file remains read only. I tested this using root explorer, but anything requiring su works fine. But all hope may not be lost, I was reading on a chumby forum someone suggested using mkfs.jffs to make it writable, but further down it notes that you would need to change the kernel (easy enough to recompile I think), to utilize a different file system. The boot loader would also need to be modified, something I am not ready to try and tackle just yet, I think I would be bricking my nextbook pretty quickly.
It is a start and I am actually learning a lot as I go.
Any thoughts or suggestions are welcome.
I am definitely a long time user / cyanogenmod / aosp fan, but as far as ripping open .img files its definitely new territory, I tried to find an internal SD card like the nook has, to maybe dump it, but I cannot find such a beast. Any progress you make is awesome. So do things like root explorer work, just not on /system due to cramfs?
Correct, root explorer does work, but due to cramfs, it does not allow you to toggle to rw from ro on the /system.
Working on taking apart apk's and customizing and rebuilding and resigning next.
just flashed this rom and it works great!
How would I go about doing a custom boot animation or image?
... even if it means flashing a new rom from clean?
This is great. Thanks. The only question I have is why do I see so few items in Market? Does it have anyhting to do with compatability?
Calendar & Sync Access
First, thank you for your work.
Before I update by Next7P, have you included Google Calendar and Sync access in this update?
I use MyPhoneExplorer and will need calendar sync to work so I can fully use for business.
Thanks.
There is another method to get Google Market on the Next7P, I am a new user so I can not post the link, but google , forums Whirlpool net au archive 1756859
, very easy and works great, but cannot get sync to work.
Dan,
Thanks for the responses!
sgtfoo : You can use Wendal's rk29xx tool to take a copy of my rom image, or the original update downloadable from nextbookusa.com, and
unpack it. You then have access to the system directory in an editable format. you can go into the system folder /system/media and replace the bootanimation.zip file with another one. Just be sure the image format is 480x 800 and that the zip file has 0% compression ratio. After you make the changes, just repack .img file via Wendal's tool and reflash.
dodoclub : Not sure why. I have a full market. You might try clearing the data and cache for the market. My market shows pretty full, I.E. I got 31050 entries when I searched for facebook in the market.
Danno65: Actually that is something I have been working on. I can get my google calendar to sync, currently I am using a calendar from the market called Jorte, which works great, how ever, googles actual calendar.apk closes unexpectedly, I am thinking it is just a version problem with the calendar, but haven't had a lot of time to follow up on it.
FYI here is the link to Wendal's tool, which makes it much easier to work on the update.img file.
https://docs.google.com/leaf?id=0B8hUXYDeoy_hNTc1YTVkYTMtNTNjZS00YjI2LTgyNDYtYjRjZjFmODdiZTQ1&pli=1
Cheers!
If you have any request or questions please feel free to ask, I will help anyway I can.
Thanks Dochoppy
Got one of these tablets for Christmass to replace an old broken tablet I use for work.
Google hosts our work email, so I still need to get Contacts and Appointments going, but I maybe able to side load them.
Noticed build.prop still has ro.secure=1. This prevents adb from having root access??
Calendar & Sync Access
DocHoppy,
I came across a post where the "Calendar.apk" and "CalendarProvider.apk" files must be in the "system/app" directory to work properly, I tried to copy these files to the above directory but found it to be read/only, will wendalls tool have to be used to get access to the directory?
Also, did you get your google calendars on your desktop to sync with Jorte on the Next7P, I tried but no luck.
Thanks
Dan
The updated image file worked great, thanks again
Thank you so much for your work in building a new rom for this thing. I am anxiously awaiting a new filesystem so we can have true root. How do we manage to recompile the kernel for ext4 support and change the /system fs?
Hello, first of all, thanks for your work!
I am having trouble loading this rom. it says there's an invalid image file in my sd card and if I want to delete.
Now, I don't know if my tablet is a never or older version of what you guys have...
Next7p
2.3.1
kernel: 2.6.32.27
build: v2.0.7.....
my serial is also different from alot..it starts with YF0511
any help or tips?
markmatters said:
Hello, first of all, thanks for your work!
I am having trouble loading this rom. it says there's an invalid image file in my sd card and if I want to delete.
Now, I don't know if my tablet is a never or older version of what you guys have...
Next7p
2.3.1
kernel: 2.6.32.27
build: v2.0.7.....
my serial is also different from alot..it starts with YF0511
any help or tips?
Click to expand...
Click to collapse
I would say the serial number would have something to do with it, check on the site for nextbook and see if your serial is in the same *batch* as ours, if the original serial is in a different group, im assuming the hardware may be slightly different? If so, you can always use his method to repack the original with root.
First off I would like to say that I was very pleased when I came across this thread from another one. I haven't flashed this ROM yet, but plan to. Thank you for your work on this as I have been searching the whole internet since I got this thing [4 weeks now] for some sort of custom ROM. It is hard to use this tablet when I have ICS on my Captivate and Vibrant. GB just isn't as cool.
One thing I hope we can work on is root access, so we then can use Titanium Backup. Then we won't have to manually reload everything when new releases come out.
With all that being said, if there is anything I can do to help, I would love to. Like I said, I plan on flashing this probably tomorrow or Tuesday. Thanks again.
For the record, I got titanium backup working fine on this rooted rom. it is capable. You just need to reboot after it restores a backup.
i'm new to android. glad to see rooted rom finally, keep it up!!!
i have a clarification, any improvement in the booting time? my device took 1min30sec (power ON to ready to use, for me, 90sec seem like not fast enough).
Good luck on improving boot time. And besides a tablet is best used when on all the time... try using the suspend state to quickly wake it. We're just starting with the early versions of this rom... give it time to grow.
Sent from my N7p using XDA App
Build.prop editing
Okay so observation:
Our tablet is not recognized as a "tablet" by the Android market, only and android device.
What prop would I have to edit in order to have us recognized as I tablet. I noticed this when:
I finally managed (through some internet tutorial before this rom) get the market working (the first version, not 3.1+). And when I downloaded apps (I'll use Minecraft Pro as an example) I noticed that the way mine looked and the way the tablet version looked via android market photos and Youtube, ours looks like an enlarged phone version rather than a tablet optimized version. What can I edit to fix this?
Flashed this today... so for it works great. Love the new boot animation. Great work and can not wait for future releases!
Sent from my Nextbook Premium 7 (Doc Hoppy's Rom v02) from the XDA app.
---------- Post added at 12:16 PM ---------- Previous post was at 12:03 PM ----------
One thing that would be great on a future release [not sure if it is possible yet with out r/w], would be a bigger data partition for apps. Moving everything large to the SD is ok, just takes longer to boot those apps. A kernel that would allow voltage control app [like CPU Master] to work also. Just a thought!

[ROM][2012.09.19] Lenovo A750 custom ROM (GB&ICS)

Please note this is a rewrite and cleanup of first post. Original firstpost is in post#3.
Here I publish the ROM's I make for the MT6575 based Lenovo Dual SIM phone
The current and advised ROM is A750_ROW_S114_cybermaus_ICS_V3.1 described in post#2 below
This is the original A750 thread, but as not everyone can post in developer threads, I also have a publicly available new Q&A thread.
I advise you post your question here (if a more advanced and development specific A750 question) or in the Q&A question.
I am not going to be policing, so you can post where you like, but I invite everyone to use this new thread for any Q&A, and this thread for ROM releases and deep development talk only. Please understand I do not know everything, so using the Q&A thread is better then PM'ing me, as that way maybe others know the answer too.
Also, I am moving file hosting to Dev-Host. So if you encounter a dead link to a ROM file, do look here in my Dev-Host folder.
ICS IceCream Sandwich
Starting 2012/09/12 I have a second flavor of ICS ROM for the A750
ICS V1 ~ V1.3 are based on the original Lenovo A750 ROM's Most people tried them, but went on to APKHOT because of multilang. There was a V2, but never released
ICS V3 and onward is based on the Lenovo P700 ROM, see below
ICS V1 series
It is a update.zip type update. If you already got S306, and rooted/gapps'ed it yourself, you could stick to that, this is the same, with some minor extra cleanup.
'Normal' cleanup actions:
- Prevented update from overwriting Recovery
- Added root (Chainfire) & gapps (CM9 120429) & Maps & Streetview
- Cleaned Chinese & SmsReg
- Replace talking Unicom bootup with silent butterfly
- Set to US/en & added MoreLocale2
- Added MobileUncle 2.0.9
Instructions for A750_S306_120530_cybermaus_ICS_V1:
Assuming you have the custom recovery. If not, flash the recovery from my 4-shared using the flash tool.
- Put S306 V1 zip file on SD card (do not unzip)
- Also put S306 V1.3 zip file on the SD card (do not unzip)
- Boot into Recovery
- First apply V1, then apply V1.3
- Potentially, clear userdata and cache, especially if you come from any S14x GB
- Reboot, and wait for it to complete.
BTW: It should probably be noted that while I packaged V1.2 and V1.3, it was again bgcngm who we have to thank for knowing how to solve the location problems.
If you already lost recovery due to the S306 OTA update, reinstall it using the flash method from first post.
Please always respond if you tested it, even if you did not like it.
Oh, and if you do like it, press the thanks button of course.
ICS V3 series
For a long time I guessed the P700 is similar to the A750, but why bother. Until I recently heard it has a multilingual ROW (Rest Of World 海外版) version!
So I took the leap, and transplanted the A750 kernel into the P700 ROM (needed because the screen driver is different), and installed it on my A750.
It works pretty well. I did not need to fix location services or gapps (though I did put the newest in there). Also did I not need to clean up any Chinese apps. And the Calender is Chinese free, and the Dialer free of Chinese city names. So I barely had to do anything. Also GAPPS TTS was in there, though I still cannot find the settings menu.
But alas, the only 'multilang' in the ROW was Vietnamese. I guess "Rest Of World" is pretty limited.
Also, for those of you that liked it, the Security App (Anti-Virus, and limit permissions per App, so sort of a firewall) is also missing. I may put it back in later, but I want to run vanilla for a while to test stability.
But it is still nice and clean, and all programs a month newer. And Chinese out of the browser/email-setup/calender/dialer. Oh, and for all of you that went to APKHOT because of the newer SIM taskbar icons: It also has the newer icons. For an ongoing list of findings in post #585
So for those of you that want to try: A750_ROW_S113_cybermaus_ICS_V3 based on P700_ROW_S113_120801.
Assuming you have the custom recovery. If not, flash the recovery from my 4-shared using the flash tool.
A750_ROW_S114_cybermaus_ICS_V3.1
Based on factory ROM P700_ROW_S114_120903, and located in my Dev_host. Similar to V3, but newer, and a few extra tweaks.
Summery of changes:
- Same as on V3, and additionally:
- Whatever Lenovo fixed in their S114 (there is a unconfirmed suggestion that it may be signal strength related)
- Different (better?) call-log and Caller-ID behavior, see post #3 below
- Prepared busybox (you need to run script /system/xbin/installbusybox as root if you want it)
- Added a tweak so USB-Debug notification is no longer shown
- Added a tweak so Wifi works on all 14 international channels (rather than only the 11 US ones, may be undone if you set a different locale)
- Kept the original S306 radio firmware (baseband). They had the same timestamp as the P700 one anyway.
Instructions:
This is a update.zip type ROM. If you are on any ICS ROM, you do not need to flash V3 first, you can directly flash V3.1"
- Put ROW_S114 zip on SD card
- Boot into recovery
- Apply zip file
- Reboot, and wait for it to complete.
- If you came from a domestic Chinese ROM, clean data for calender, notes, desktop and if possible contacts, using these utilities. Or if you do not mind, wipe all data from recovery.
=================
BTW: Due to new forum rules, resulting in a large number of people that cannot post into developer threads and that subsequently PM me, I open op a new Q&A thread.
I am not going to be policing, so you can post where you like, but I invite everyone to use this new thread for any Q&A, and this thread for ROM releases and deep development talk only.
Consequently, if you PM'ed me, look for your reply in this new thread
Thanks
====================
PS: do drop me a reply if you use or tried it! Or press the 'thanks' button.
HELP, I lost my IMEI ! / Caller ID
Please note the content below was originally in post#1. I cleanup Post#1 a little, to make it clearer to new users.
=================
Hi All
My second Lenovo A750 ROM release: A750_S148_120428_cybermaus_V1
Edit: For ICS rom check the 2nd post.
Fixed toward V0
- Different GAPPS, resulting in
- More stable Play Store with less unlisted apps
- WiFi based Location services (from for example Places) working (GPS did work in V0)
- NANP (US style) numbering formating removed from phone
- Replaced Unicom talking bootup animation with silent Lenove butterfly
- Added 'new phone Setup' program
Still to improve (if you know how, on a MT6573/MT6575, let me know!)
- Caller ID lookup in Contacts should ignore IDD prefixes
- SMS app trips over hyphens and brackets in stored numbers
- Arabic/Hebrew RTL fix not applied yet.
- Remove 'new phone Setup' program again?
This is a simple and clean ROM, not too much done, essentially just the factory S148 ROM (A750_S148_120428) rooted, cleansed from Chinese and with Google Play Store and other GAPPS.
So it is mostly clean. It does not even have the Skype/YouTube/Flash apps, as I believe such apps change too often to be in the system portion. I upload the ones I got from Etowalk separately, in folder Etotalk_apk, you can install yourself.
Specific changes:
- Rooted the phone
- Set to boot in US-english
- Added MoreLocale for extra languages
- Removed Chinese apps, incl Chinese keyboard
- Removed SmsReg.apk
- Left Lenovo Security (anti-malware) intact
- Added Google framework
- Added modded Play Store 3.x.16-mod from XDA
- Added MobileUncle toolbox V2.0.9
- Added CWMR Touch / 593zn.com recovery image
Most images are unmodified from stock S148, even boot.img is unmodified. Only system.img was really changed, you could flash only that.
You will also need the flash tool and USB driver. For example tool SP_Flash_tool_v3.1208.01 and driver USB_VCOM_Driver. The flashing is the
typical Mediatek MT6573/MT6575 based flashing sequence as shown by bgcngm, the undisputed champion of Mediatek ROMS.
Which reminds me: Thanks to bgcngm for his help, and to jazzor for his help
Instructions:
By default, the ROM will not overwrite USERDATA. If you want a clean slate, first extract empty.userdata.rar. Also do this if you get "weird" behaviour after flashing, like Play Store not starting, your old setting may be incompatible with the new ROM
By default, the ROM will not overwrite FAT (the internal SD card). If you like an empty internal SD card, extract empty.fat.rar before flashing.
By default, the ROM will clean out CACHE. If for some reason you feel CACHE should not be cleared, deselect the CACHE from flashing.
IMPORTANT: If you want to play it safe, it may be wise to backup your phone's IMEI file before you flash or reset to factory defaults. See here for help on backup or restoring IMEI
IMPORTANT: If you are trying this ROM on another model phone, which I STRONGLY advise AGAINST, then do NOT flash the first two (preloader and dsp_bl) as you will may not be able to flash it back afterward and thus brick your phone. Someone tried it against an ZP100 and bricked his phone.
Download A750_S148_120428_cybermaus_V1
I will also upload the driver, flash utility and official ROM's there.
Enjoy
May 11, 2012
cybermaus
------------------------------------
Caller ID bug
Caller ID on the on the A750, on the P700 ROW, and I suspect in general on the Lenovo phones.
The lenovo ROW (=Rest Of World) based ROM are much more international then the other Lenovo ROMs. I cannot be sure about the other china brands, but Lenovo in ROMs intended for the local China market, 'update' the phone to nicely recognise chinese cities. I am sure China locals will be pleased with this service. I do not know if/how this applies on phones which are already more international like the multilingual Zopo's and Thl's out there.
In doing so, Lenovo seems to break the normal caller ID function. Not only do you get to see Chinese city names for non-Chinese numbers, but also in some cases it does not resolve an incoming call to your phone book. This seem to be especially true if the incoming call is in local format (no +CC) and the phone book is in international format (with +CC)
The ROW based ROMs work much nicer. No Chinese city names for non Chinese numbers. Also, it finds correct country names. So far, I was called by unknown numbers from California, UK, London, Russia, Romania, Saudi, Yemen and Jordan, and it all correctly resolved them. For California and London even to greater detail then the country. It only shows this for unknown numbers, for known ones it shows the contact name.
Indeed Caller ID seems to work correctly for local vs international format. So if the incoming is formatted without +CC, but leading 0, and the phone book is +CC, it finds it.
And it seems to nicely format all phones according to the desired national formatting. So +1 XXX-XXX-XXXX for US, but +966 X XXX XXXX SA fixed and +966 XX XXX XXXX for SA mobile. And +31 XX XXXXXXX for NL fixed and +31 XXX XXXXXX for NL mobile.Very nice
HOWEVER: The caller-ID lookup now seems 'whitespace-sensitive'. I had a contact number stored as +966 XXX XXXXXX, and he did not find it. But when I changed it to +966 XX XXX XXXX it did find it. Similar for number that had "(XXX)" brackets in it, as was common in NL in the past.
This may or may not be a problem, because if you touch your phone book entry in the edit mode, it will automatically change +966 XXX XXXXXX to +966 XX XXX XXXX. Symilar if you sync through Google. But as I sync with outlook using Android-Sync, many are stored like +CC (XXX) XXXXXXX
So, Caller ID is 'different'. But better? For most people probably yes. But may depend on your situation.
EDIT: I found the whitespace was actually due to me not clearing data. Everything seemed find, but the caller ID was a resulting problem. You need to clear contacts, so it reindexes the phone numbers, and then Caller ID is perfect. Even ignores () brackets. You can clear contacts many ways, but I made a patch for it.
Links to other A750 ROMS and other useful information:
EDIT: I have not kept this list updated. Search this thread for other ROMS, especially Smileyvvv's APKHOT seems popular
Original A750 ROMs: (S14x=GB; S30x=ICS)
A750_S148_120428 - Chinese/English - No root - No play store
A750-S305-120514 - Chinese/English - No root - No play store
A750_S306_120530 Original full S306 (no OTA, flash package)
Please note that all *official* ROMs come with password bbs.lenovomobile.com. If the password is missing, someone did something to the ROM. Also, there are 'root' images availible that only flash boot.img. These work by overwriting system.img *on every restart*. Creative, and I used it myself for a while, but currently I feel the method described below is a better method.
Other modified ROMs (GB):
S750 S143 Etotalk Multilang
A750_S148_120428_RUS by Anton_vrn V1.3 (true Russian translation!)
BM's Hebrew fixed
BaderMQ's multilang+Arabic fix
(please note none of these are really multilang, just multi-locale, which means system apps will remain English, but third party apps can be set to other languages, similar to my ROM's, I simply do not make the claim. Anton is the only one who actually translated the ROM, but to only one new language)
Other modified ROMs (ICS)
My ROM in sepo of course
lenovo750-4.0.3_Anton_vrn_v3.01(true multilang?? Hints that it contains: ar-de-es-fa-fr-in-it-nl-pt-ru-th-tr-vi-zh, but based on S305)
Etotalk S306 multilang_by_Dean : It exists, but I do not know an internet location to download it from.
How to root a ROM yourself:
- Flash the CWMR Recovery partition (the recovery only, not the root&recovery one)
- Reboot into recovery (poweroff - Press/hold Power for 2 secs, then also Up/Down)
- Apply this root update
- Use RootExplorer to remove any Vending* or Phonesky* from /system/app
- Apply the correct GB or ICS GAPPS package, from bottom page here, or its mirror here.
- If a ICS rom, even though not from me, you may still want to apply my ICS V1.3 update, especially if you have location or market compatibility issues.
Caller ID
Hy I have a Lenovo A750 and all my contacts in the address book are saved in international format ex.: +44 78......, and when somebody calls me the number that shows up on the display is 0 78....., as local format.
Unfortunately the phone doesn't recognise it as being saved in my address book and it show's me "078 .... is calling" instead of "Ben is calling".
How could I fix this?
Please help me, or at least give me directions.
Thank you
Its one of the more important (of not most important) issues, and it has focus of myself and more experienced people. It's listed above as "Caller-ID to Contact mapping should ignore IDD prefixes." But alas, afaik, at this moment, no solution exists.
Keep an eye on this thread, and/or this one. Rest assured that as soon as we know how, it will be fixed.
Edit: Caller ID bug is less prominent in ICS ROM's
And in any case, using this, you can work around it.
COOL
You have done great job man thank you. I was using etotaks v 2.0 rom but it kind of sucked so i decided to try yours and its all good. I like the net traffic, battery saving and LeSecurity and they come only with the lenovos rom. I will look foreward for future releases. Great Job.
Reagards.
RTL
Hi,
Are you planning to update your rom?
i was searching for a Lenovo A750 rom that support Arabic - Hebrw RTL.
There is a methods out there but its only for deodex Roms,and your rom odex.
anyway to convert odex to deodex?
Thanks
There is already a Arabic & Hebrew RTL version for A750 out there. Not my me, but by someone more experienced, though A750 is not his focus.
I am playing with my ROM, and while it is not on the top of my list, once I get round to updating it I was thinking of copying his RTL fix to my ROM also. In the mean time, try the other one, and tell me how it works in relation to the issues I still have on the to-do list.
Thanks
I downloaded the rom from that topic , it failed to install . it give me an error msg when i try to flash it thru CWM.
I manage to convert the lenovo A750 Roms to odex using crcstudio_1.2.0.0
now i'll try to apply the fix manually.
Well, you can always try to use the recovery I am using. It seems to work well for Bruno's ROM's.
I have never even attempted to put CWM on these Mediatek based phones. Nor have I heard of anyone else (other than you). Are you able to flash anything with it? I was assuming there was a reason people were not using CWM on Mediatek.
I advise you to put Recovery ROM from here, flash it using this method. And then use that to apply the zip based ROM's.
I am working to update my ROM with Hebrew also (actually, working on other stuff, but will try to also put that in), but be aware, it will also be a 'flash-utility' ROM.
Edit: ROM V1 is coming tomorrow, but no RTL, sorry. I was able to fix the location service and Play Store is now not blocking so many apps.
I already did try CWMR ... But when i ever try to flash BM Rom it shows an error.
And by the way .. I already used CWM to flash other roms on my A750 and its working.
so what i did:
I extract BM Rom and merge it with other chinese rom S148 and build new rom.
It works.. i can read/write Arabic . and for browser/gmail i install the Brightidea's app from the market. it fix the Arabic problem.
New V1 upload in first post.
Spanish from etotalk?
There are any possibility to get the spanish traduction from the etotalk rom?
Thank you
I'm using new ROM since last night.
I made a complete flash (userdata, sd...).
Now there are less Chinese applications, is good.
Good work, Thank you.
Quick question
Hi cybermaus
sorry for the noobie question but I didn't own a smartphone since windows mobile. I expect a A750 and it might come unrooted. Do I have to root it before installing the rom or is this done automatically in the flushing process? Thank you.
newbie_vlc said:
There are any possibility to get the spanish traduction from the etotalk rom?
Click to expand...
Click to collapse
Check if the Spanish selection is part of the 'MoreLocale2' app. If not already there, add it as a custom locale.
Edit: If you meant: can I take Etotalk ROM and transplant its Spanish into my ROM, then that is already done! Neither Etotalk nor myself actually translate anything, we both just added the free public app MoreLocale2, which has most translations in it. Using MoreLocale2, the phone becomes 'reasonably' translated, though there may remain some English parts.
cliviu said:
Hi cybermaus
sorry for the noobie question but I didn't own a smartphone since windows mobile. I expect a A750 and it might come unrooted. Do I have to root it before installing the rom or is this done automatically in the flushing process? Thank you.
Click to expand...
Click to collapse
This flash is using bootloader method, not recovery, and it will not need root. Upon flash, it will apply root automatically. Use the flash sequence as linked in the first post.
It is strange the size is only 157 mb. I will give it a try
Yes, V0 accidentally had two copies of the rom image inside the rar. It did not hurt, but it bloated the package a bit. The 157GB (164 981 710 bytes) is correct
Good to see you are paying attention though
Remove the Unicom bootup animation
I landed on this page when I was looking for help to remove the Unicom talking bootup animation/sound and remove all Chinese apps from my phone (A750) that I recently picked up.
But I have never done this and I am no developer but can you please help me with a list of procedure that I can follow to use this A750_S148_120428_cybermaus_V1?
If someone has skype or share their phone number I can call to seek help.
Email: [email protected]

[MOD] 6.0.1/iOS9 style Emojis for MM

All,
I have successfully implemented the Unicode 8 iOS style Emoji s in Marshmallow. These do NOT have the color modifiers for skin tone.
I have spend some time trying to figure all this out successfully using the right files etc. I am going to provide full credit to the creators of the original modifiers and threads where I found everything. There are multiple threads I found originally.
1) Bottom of OP of the thread below titled Emoji FIX for Marshmallow.zip thread by caiosilva96
http://forum.xda-developers.com/and...8-3-diverse-color-emoji-t3136169/post61370793
2) The file called: iOS9_1EmojisForMM.zip from the following thread below. ( thread by DespairFactor ) I cannot find a valid link anymore for the font files which is a replacement for the current on on the system. the new one is about 68MB in size fyi, luckily I have it and will post it along with the above file in 1 here
3) You will need SwiftKey keyboard to be installed and the default keyboard on your device as well.
AS ALWAYS NAND before flashing stuff as I am not responsible if you jack up your OS/device
Simply flash the two ZIP files, install and activate SwiftKey keyboard and that is all there is to it.
This was tested on NuSenSeveN - Marshmallow by santod040. The files were originally developed for nexus, but in theory should work for any MM 6.0 build
Good Luck

[HELP] Leagoo T5: why is not available any ROM ?

Hello
I've a Leagoo T5 wich use his own Nougat modifiied. TERRIFIC !!!
I'm looking for another ROM wich supporting all feature (also double rear camera and fingerprint reader) because it's impossible to use it.
T.I.A.
Paolo
You can use "MTK Extractor" to extract system.img and other files, you can then modify them, and flash them using "SP Flash".
I recently uploaded a clean stock ROM (LEAGOO_T5_OS2.1_E_20180116) to Mediafire and Needrom.
I've also uploaded a carepack if you are interested in the new ROM, or even for a custom.
The command for fast boot is: fastboot oem unlock
Ferather said:
You can use "MTK Extractor" to extract system.img and other files, you can then modify them, and flash them using "SP Flash".
I recently uploaded a clean stock ROM (LEAGOO_T5_OS2.1_E_20180116) to Mediafire and Needrom.
I've also uploaded a carepack if you are interested in the new ROM, or even for a custom.
The command for fast boot is: fastboot oem unlock
Click to expand...
Click to collapse
Do you mind sharing please? I'd love to get a working custom rom on this device.
I still can't add links yet, so you will have to Google search: "MTK Extractor". Download it, and then download the latest official ROM, which I have uploaded to Needrom and Mediafire, Google search: "OS2.1_E_20180116".
Extract the "system.img" file from the stock ROM using MTK Extractor, you can then go ahead and make your customization's. System apks are signed and locked, however they can be replaced.
When you have finished, you can use MTK Extractor to create a new system.img file with all of your modifications (including root, if you add it). The size for system.img is 4096mb.
The MTK Extractor tool uses a slider bar and text input for the partition size, the slider is limited, however enter 4096 into the text box (don't delete the text, it bugs).
Enter fastboot (Power + Volume up), third option, then using ADB with command prompt, type the command: "fastboot oem unlock", and then accept.
Now you have unlocked the phone, you can run your custom ROM. In a factory locked state, ROM's will install, but not run.
I forgot to mention my Needrom pack contains MTK Extractor. If you can make roms, there are 3 stock bugs that I would ask you to fix.
1: If the navigation bar is hidden, there is a window transition blip (bottom of the screen) if you swipe to recent apps.
2: If you select the first (bottom left) icon from the lock screen (voice, usually), you get a grey background.
3: Bluetooth scanning sometimes bugs (MAC instead of name), once paired there are no issues.*
* This may be due to my headset, but I remember my TV also displaying a MAC once.
Also, can you align or remove the 4G icon that shows even with data turned off.
Ok... So far this thread seems to be the only one on xda-dev about leagoo T5, which i just buy.
By the way thanks Ferather for pushing the rom on need rom.
Here the link :
https://www.needrom.com/category/leagoo/t5-leagoo/
Need help
Hi, could you please share the Mediafire link?
Since the last rom update (LEAGOO_T5_OS2.1_E_20180822 aka OS2.1_E_20181025) I post on needrom a moded rooted boot with magisk.
i have this leagoo t5 running this newest e_20181025 but im getting a problem with my front facing camera only displaying like an upsidedown image of the rear camera. please advise on what i can do to fix this
Maybe inconsistence between differents partitions (like boot and system)
If you know what you are doing I will advise reflashing all principal partitions.
But i don't think the phone came like this when new, so someone must have messed something.
https://www.mediafire.com/#3c2rnntnz3kw0
LEAGOO_T5_OS2.1_E_20181025.zip -- Original Leagoo T5 ROM
LEAGOO_T5_OS2.1_C_20181025.zip -- Custom Leagoo T5 ROM
No issues, other than the one I have mentioned, which is just an app default.
Enjoy!
hey cool rom bro.
Thank for sharing.
No problem, I thought I would start the ball rolling for customization of the rom, since adding ringtones does not work with the stock rom (media storage app issue I think).
You can permanently edit the rom yourself, which I found very easy. If you want to add apps, simply install them from sdcard or store, then navigate to "/data/app", you will find your installed app or update, with odex files and libs, if any.
I created a temp folder on "/data" called "Working" and copied everything into it, and then setup the correct permissions, and renames, and transferred to either "/system/app" or "/system/priv-app", depending on the app.
A better way to do it, is to use "Lubuntu" from live USB or DVD, and then mount the image and edit it as root: "sudo *file explorer*", in this case "sudo pcmanfm-qt", then create a folder in "/mnt" called "ROM".
Next copy "system.img" to "/tmp", and mount it "sudo mount /tmp/system.img /mnt/ROM", now you can do whatever you like, but make sure to "chown" and "chmod" all your modifications.
Make sure you delete anything you will replace when you transfer, else you might get old unused files (folder merged and non-replaced items remain).
----
If you make edits on the phone using an app, and want to make your own "system.img", use the readback option in "SP Flash Tool".
physical_start_addr: 0xe000000
partition_size: 0x100000000
----
Note: Most non-stock apps *do not* support the triple (3x) camera setup, and will either use the wrong camera or crash.
Yeah I encounter problems too to add custom ringtone and wallpaper but i manage to get over it by changing some files permissions
By the way I am "456456" on needrom, the boot img with magisk is from me
I know the time needed to make a custom rom and I'm glad to see that I'm not the only one trying to mess with this not-bad-at-all cheap phone
There is a possibility of an Oreo port, there is a Leagoo T8s with the the same chip that runs Oreo 8.1.0. I have checked over the rom and it looks possible (based on my basic knowledge).
Cygwin + Cmder, for Android. I made the pack myself, and thought it might help others using Windows who want various Linux tools.
I added Cmder for better console support and easy admin: ---- http://www.mediafire.com/folder/lzsf7xd2wwsm4/Commander
Quick update, will now self configure "/home", added ADB and Fastboot.
Ferather said:
There is a possibility of an Oreo port, there is a Leagoo T8s with the the same chip that runs Oreo 8.1.0. I have checked over the rom and it looks possible (based on my basic knowledge).
Click to expand...
Click to collapse
Hi, Running your ROM with no other mods, it's certainly better than original. Just curiousis there anyone working on an Oreo based ROM ?. ... J
Thanks, I did not manage to get the Oreo from the T8 to function, due to hardware changes.
Ferather said:
Thanks, I did not manage to get the Oreo from the T8 to function, due to hardware changes.
Click to expand...
Click to collapse
Ah !, C'est la vie, would have been interesting. Apologies for late reply was away from home and didn't have much spare time. ... Jack
please tell me how you can fix the inverted touchscreen Leegoo T5

[Guide] Enable VoWiFi on custom ROMs

First attempt at making a guide for this, so please feel free to make suggestions on how to clean it up (I feel like it doesn't lend itself well to step-by-step but you're welcome to try).
Great news everyone! (well, all three of us with T-Mobile/MetroPCS in the USA...)
I got VoWiFi to work last night on a couple custom ROMs and successfully made wifi calls. It doesn't require many pieces, but it can be complicated (not just a step-by-step) to get the required pieces into the right places.
- You need a copy of /system/priv-app/CNEService/CNEService.apk from a stock OOS install (I did it with the one from 9.0.3).
To get that, you might be looking at booting into TWRP with the other slot active or temporarily using something like @mauronofrio's fastboot install ROM from https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665 and just flashing the system image to one slot to grab the file before restoring back to the one you had. Anyway, use caution, be sure of which slot you're on and what you're flashing to, and copy the apk from /system/system/priv-app (the path when you're booted from TWRP instead of inside the active system slot). You'll probably have to use ADB commands to push/pull the file directly to/from a computer if you already have a custom rom installed on one slot with screen lock set up, since /data will likely be encrypted and unavailable when you're booted up in TWRP with the other stock slot active.
- You need to be able to install a rando apk as a privileged system app to get this apk back into /system/priv-app/ correctly on your custom ROM.
There are ways to do this manually that involve lots of permissions and editing XML files for privileged app permissions in a couple places, but realistically you're using a custom ROM so you probably have Magisk (otherwise what the hell are you doing with custom ROMs?) so you should just use https://forum.xda-developers.com/apps/magisk/module-terminal-app-systemizer-ui-t3585851 and pick option 3 to install it. You'll need Magisk, a terminal emulator, and some ability to type a file path to use this module.
- You'll need to make sure that your /system/build.prop file contains the line "persist.vendor.cne.feature=1" (AEX doesn't at first, XenonHD does, not sure about others).
We've got the requisite stuff in /vendor already, this just enables the ability to use it. You'll need to have root access and a file manager/text editor (Amaze is FOSS and available through F-Droid, MixPlorer through XDA Labs is also nice, or use TWRP and a text editor that knows unix line endings on your computer to copy things back & forth via MTP and remember to set permissions after, I think it's chmod 644).
Reboot, unlock, and try to make a test call. Successfully got it to work on AEX & XenonHD last night, I suspect it works for Omni and others as well.
Try some more ROMs out and report back below if it works for you too!
Now if only you could fix the Android Auto bug.
I'm totally kidding. This is awesome. Thank you!
Tested Omni and it works too; just needed the APK added/systemized, already has the correct entry in build.prop.
hello
my op 6 running oxygen ob 10. vo lte work. but when I connect to wifi. vowifi not work ? how to fix it ??
Any chance someone could upload and share the CNEService.apk? Would make life a lot easier...
brmbjn said:
hello
my op 6 running oxygen ob 10. vo lte work. but when I connect to wifi. vowifi not work ? how to fix it ??
Click to expand...
Click to collapse
If it's not working in OOS, I don't know what to tell you. Might just be that the connection isn't reliable enough for it to decide to enable... but I never used OB10; I switched back to stable 9.0.3 after OB9.
Great work!

Categories

Resources