Stock Firmware H850 V30a "Oreo" OPEN EU ROM
KDZ-File: H85030a_00_OPEN_EU_OP_0910.kdz (MD5)
Flashable ZIP Complete: LG-H85030a-Flashable.COMPLETE.zip (MD5)
Flashable ZIP Boot: LG-H85030a-Flashable.Boot.zip (MD5)
Flashable ZIP Bootloader: LG-H85030a-Flashable.Bootloader.zip (MD5)
Flashable ZIP Modem: LG-H85030a-Flashable.Modem.zip (MD5)
Android 8.0.0
Patch level: 1 September 2018
Baseband: MPSS.TH.2.0.c1.4-00070-M8996FAAAANAZM-1.163432.2a.168009.1
Kernel: 3.18.71
Build: OPR1.170623.032
Software version: V30a-EUR-XX
Changes:
- Android Oreo
Instructions:
Upgrade from Android 7 and root using TWRP and Magisk
Do backups! Expect to lose your apps and settings!
Get the required imgages:
H85030a_00_OPEN_EU_OP_0910.kdz from above --> store it on your HDD.
twrp-3.2.3-2-h850.img --> HDD
Magisk 17.1 ZIP file. Copy it to your G5's SD card.
the LG-H85030a-Flashable.COMPLETE.zip from above --> SD-Card.
Optional: You can additionally download the MD5 file which is being used by TWRP to verify the ZIP file (simply place it in the same folder like the ZIP).
As a safety measure, I'd clean upgrade with the stock KDZ first using LG UP. This will replace also recovery to stock. If successful, you can continue.
Unlock the bootloader (if not already unlocked) as described here with the official bootloader unlock and flash TWRP. TWRP 3.2.3-2 worked for me. Boot into TWRP as described.
Optional: Do a backup in TWRP.
Format Data: "Wipe" > "Format Data" > type "yes". Wipe slider wipe is not enough!
Go back until you see the TWRP main screen. Then Reboot into Recovery. Don't start into System!
Flash / Install the LG-H85030a-Flashable.COMPLETE.zip and Magisk-v17.1.zip without reboot inbetween.
Reboot to System
enjoy!
To build the ZIPs I used parts of autoprime's previous files. Thx again!
Disclaimer: This is not an official post by LG to update the firmware! Don't blame me if you destroy your phone. If you use these files and instructions you do it at your own risk!
Is the Oreo firmware backward compatible with Nougat?
Sent from my LG-H850 using Tapatalk
Why does it come with the Vodafone app?
Flashable ZIP Bootloader: LG-H85020v-Flashable.Bootloader.zip (MD5)
Flashable ZIP Modem: LG-H85020v-Flashable.Modem.zip (MD5)
Click to expand...
Click to collapse
Just curious if above should be in the OP as they are Nougat files unless I'm mistaken.
I've had it with these stock firmware files and images, I'm waiting until a debloated stable custom rom hits. The KDZ hung on boot even after factory resetting and this stock rom wipes twrp every time I reboot causing me to endlessly reflash twrp.
ezzony said:
Just curious if above should be in the OP as they are Nougat files unless I'm mistaken.
Click to expand...
Click to collapse
Thank you! My bad, the links were correct but the texts were wrong. Corrected.
VortexHD said:
Why does it come with the Vodafone app?
Click to expand...
Click to collapse
Shouldn't. I tested it and there is no Vodafone app on my device. Where did you see this? Are you Vodafone customer?
Ok, just for information (and it may be useful to others with the same scenario):
I'm on lineage Oreo, with magisk and twrp 3.2.3.2, can I flash the COMPLETE zip => then twrp => then magisk and get the rom installed keeping twrp and root? I can't access any Windows machine (only Mac) to flash the kdz file, would it work as well if i flash all that stuff in twrp?
Thanks!
xlxcrossing said:
Is the Oreo firmware backward compatible with Nougat?
Click to expand...
Click to collapse
What do you mean? Downgrading back to Nougat? Honestly I never tried this.
xlxcrossing said:
I've had it with these stock firmware files and images, I'm waiting until a debloated stable custom rom hits. The KDZ hung on boot even after factory resetting and this stock rom wipes twrp every time I reboot causing me to endlessly reflash twrp.
Click to expand...
Click to collapse
The first boot after KDZ installation took 5-10 minutes on my device while showing the LG symbol and flashing LED... But it continued. The firmware appears stable on my device. TWRP runs persistent.
karma0321 said:
I'm on lineage Oreo, with magisk and twrp 3.2.3.2, can I flash the COMPLETE zip => then twrp => then magisk and get the rom installed keeping twrp and root? I can't access any Windows machine (only Mac) to flash the kdz file, would it work as well if i flash all that stuff in twrp?
Thanks!
Click to expand...
Click to collapse
I'd give a try but don't blame me if it is not working. Flashing the KDZ was a safety measure to me as I was not entirely sure if flashing COMPLETE alone is enough. But you are already running an Oreo OS, so I'd try it. As long as you have access to TWRP or Bootloader you can flash your working Lineage image and TWRP. However, flashing TWRP after COMPLETE makes no sense in my eyes as COMPLETE does not contain stock recovery.
DavidFlint said:
Shouldn't. I tested it and there is no Vodafone app on my device. Where did you see this? Are you Vodafone customer?
Click to expand...
Click to collapse
i also see 2 vodafone apps and some french thing "jeau" or something similar that keeps asking for permissions.
im on EE, but the previous firmware was non branded.
everything seems to be working smoothly
Anyone got any other link than Mediafire? Takes 4 hours to download and would like it faster?
DavidFlint said:
...However, flashing TWRP after COMPLETE makes no sense in my eyes as COMPLETE does not contain stock recovery.
Click to expand...
Click to collapse
Thank you so much, I didn't know COMPLETE has no recovery inside. So (sorry for bothering) what does COMPLETE contain? My guess is Rom+boot+modem+bootloader but now I'm not sure anymore
Hi
So is good rom to install from TWRP recovery. Any one fund any issue?
DavidFlint said:
Shouldn't. I tested it and there is no Vodafone app on my device. Where did you see this? Are you Vodafone customer?
Click to expand...
Click to collapse
The Vodafone app is called "Start" and the phone is unlocked and I'm not a Vodafone customer.
Rom is from Vodafone or only app?
Flashed today, have been running it for about 5 hours...
Gotta say I'm in love, and btw, no bloatware apps nothing. Just clean stock LG Oreo. Beautiful.
bmwtomas said:
Flashed today, have been running it for about 5 hours...
Gotta say I'm in love, and btw, no bloatware apps nothing. Just clean stock LG Oreo. Beautiful.
Click to expand...
Click to collapse
I flashed yesterday coming from Lineage OS 15, wiped System, Data and Caches, installed Rom and Magisk. It works.
But I do have the bloatware from LG like Facebook App and a lot of others, that I can not entirely uninstall.
And my phone keeps presenting me a software update, that I would only see, when I agree in using my personal data for...
Btw. no Vodafone App. Why do we have these different experiences? What's going on?
Oevi said:
I flashed yesterday coming from Lineage OS 15, wiped System, Data and Caches, installed Rom and Magisk. It works.
But I do have the bloatware from LG like Facebook App and a lot of others, that I can not entirely uninstall.
And my phone keeps presenting me a software update, that I would only see, when I agree in using my personal data for...
Btw. no Vodafone App. Why do we have these different experiences? What's going on?
Click to expand...
Click to collapse
Use system app remover
Flashed Oreo on two LG G5
One got no bloatware and one came with Vodafone and Orange app
The one without bloatware has the Software Version: V30a-EUR-XX
and the one with bloatware has the Software Version: V30a-214-07
I used the same files for flashing
But the bad thing is on both phones the light doesn't work?!
Someone with the same issue?
---------- Post added at 01:27 AM ---------- Previous post was at 01:21 AM ----------
VortexHD said:
Why does it come with the Vodafone app?
Click to expand...
Click to collapse
You don't have software version: V30a-EUR-XX right?
Works the light for you?
Related
Your warranty is now void, don't blame me if your phone blows up blahblahblah.
Only system and kernel are being flashed, no Modem, BL, etc. You should already have updated to 20B before using.
Have not tested this myself, due to not owning the H850. edit: flashed it on T-Mobile 830 for fun with 20A 830 boot, no surprise, didn't work.
Decided to post anyway. If your going to use it, BACKUP, BACKUP, BACKUP
Based off of H85020b_00_TIM_IT_OP_1123.kdz
Only things touched are bootanimation (pixel black) and renamed recovery-from-boot.bak. It's also been zip-aligned.
Flash in recovery, profit??
SuperSu and Busybox included. Only /system is wiped, data left alone.
Should be able to dirty flash over current 20B if you like.
Any errors, etc, would most likely be related to deodexing as all files are stock.-Again, haven't tested this one myself
Link: H850_20B_DeOdexed
MD5: 99c9667294d1227de91605b8958233e0
If anyone would like to use this as a base, Great! Would appreciate some credit. [emoji13]
Enjoy.
Optional: Adjust Screen Color
Credits: @Chainfire for supersu. @SuperR. for the kitchen. @PlayerZ_ZawZaw for bootanimation. @jcadduono for TWRP. @bullghost for Firmware Extractor
It's people like them that make Android great!
Finally, thanks to Google/LG & XDA.
...whew.
Reserved
Great work Bro, nice. :good:
A couple questions 1. Isn't 20B just a security patch update? 2. Does this ROM zip upgrade firmware (bootloader , radio, recovery) or just update software. 3. Since it's based off of the Italian H850 variant this won't cause troubles for EU variant?
xlxcrossing said:
A couple questions 1. Isn't 20B just a security patch update? 2. Does this ROM zip upgrade firmware (bootloader , radio, recovery) or just update software. 3. Since it's based off of the Italian H850 variant this won't cause troubles for EU variant?
Click to expand...
Click to collapse
1. Not 100% sure. 2. Just system and kernel are flashed. No M/BL, etc. 3. No idea really.
Received error while flashing, code 7, seems it couldn't locate a certain filesystem and aborts installation - same here with the 20B version
Mr. Schnabel said:
Received error while flashing, code 7, seems it couldn't locate a certain filesystem and aborts installation - same here with the 20B version
Click to expand...
Click to collapse
Hmmm flashed ok on my h830(swapped kernel), wouldnt boot (of course, this is for 850), but still flashed. Not sure why your getting that error, already removed the assert.
lordodin912 said:
Hmmm flashed ok on my h830(swapped kernel), wouldnt boot (of course, this is for 850), but still flashed. Not sure why your getting that error, already removed the assert.
Click to expand...
Click to collapse
Same error... Keep at it tho, something like this could be really useful
If anyone wants to try this themselves here's a quick guide.
You can take the system.img and boot.img from either the kdz with LG Firmware Extractor or from autoprime complete zip.
Then Google "superR kitchen xda", if your using windows there is a VM iso in the thread you can use with VirtualBox etc.
Once you have the kitchen working just remember, set_metadata for perm, use smali/baksmali for deodexing and don't sign the zip or let it remove the meta-inf folders from apps.
In my h850 doesn't finish to install, it remains on initial boot animation.
failax said:
In my h850 doesn't finish to install, it remains on initial boot animation.
Click to expand...
Click to collapse
Flashed ok but stuck on LG logo? May need to flash no verify or "format data" in TWRP. BACKUP everything if formatting.
Ok so I just clean flashed my 20a for h830 and got that error code 7, doesn't happen on dirty. Just restarted TWRP after wiping and then it flashed ok. Might be the same problem over here.
Stock Firmware H850 v20q OPEN EU ROM
There is a newer version available: H850 v20s. Thread: https://forum.xda-developers.com/lg-g5/development/stock-h850-20s-eu-rom-flashable-zips-kdz-t3719732
[Update 10-05-2018] Downloads removed to gain storage for newer versions.
KDZ-File: H85020q_00_OPEN_EU_OP_1025.kdz (MD5)
Flashable ZIP Complete: LG-H85020q-Flashable.COMPLETE.zip (MD5)
Flashable ZIP Boot: LG-H85020q-Flashable.Boot.zip (MD5)
Flashable ZIP Bootloader: LG-H85020q-Flashable.Bootloader.zip (MD5)
Flashable ZIP Modem: LG-H85020q-Flashable.Modem.zip (MD5)
Android 7.0
Patch level: 1st October 2017
Baseband: MPSS.TH.2.0.c1.4-00047-M8996FAAAANAZM-1.101802.1.109832.1
Kernel: 3.18.31
Build: NRD90U
Changes according LG:
- Security updates
Instructions: Please use autoprime's H850 20D install directions here: https://forum.xda-developers.com/lg-g5/development/stock-h850-20d-eu-rom-flashable-zips-t3592762.
Works with TWRP 3.1.1 and SuperSu v2.82.
To build the ZIPs I used parts of autoprime's previous files. Thx again to him.
Disclaimer: This is not an official post by LG to update the firmware! Don't blame me if you destroy your phone. If you use these files and instructions you do it at your own risk!
Great! I had to flash the kdz to have it but now this is way to easier! Thank you so much!
This is great! Thank you very much.
Little report:
I flashed asgard kernel v7 and it totally screwed my bluetooth so I had to flash yours Flashable ZIP Boot: LG-H85020q-Flashable.Boot.zip to reverse the damage done by asgard as I didn't do any boot backup and this is what my software info says after flashed your zip. I was on stock kdz rom 20q version but now all seems screwed and also like your zip report like it is 20n version, see the attached image.
thewhisper said:
Little report:
I flashed asgard kernel v7 and it totally screwed my bluetooth so I had to flash yours Flashable ZIP Boot: LG-H85020q-Flashable.Boot.zip to reverse the damage done by asgard as I didn't do any boot backup and this is what my software info says after flashed your zip. I was on stock kdz rom 20q version but now all seems screwed and also like your zip report like it is 20n version, see the attached image.
Click to expand...
Click to collapse
Can't say why your Bluetooth isn't working anymore... But are you aware that you are not running an EUR device? I'm not sure if you can swap parts of the firmware from OPT2 to EUR that easy.
thewhisper said:
Little report:
I flashed asgard kernel v7...
Click to expand...
Click to collapse
Asgard kernel requires bootloader 10d or something, so it automatically flashes that. It also flashed kernel modules to /system/lib/modules
So you probably now have bootloader 10D with 10Q rom, with Asgard kernel modules... on top of that stock kernel uses forced module signing, so now it can't load the modules.
You'd better start over, or flash 10q bootloader and somehow get the right modules into system again.
DavidFlint said:
Can't say why your Bluetooth isn't working anymore... But are you aware that you are not running an EUR device? I'm not sure if you can swap parts of the firmware from OPT2 to EUR that easy.
Click to expand...
Click to collapse
Wow mate, I'm running an EUR H850 LG G5 device
The details above were totally screwed as I explained - after flashing an asgard kernel... Not sure why they werent fixed after fashing your boot zip but now after flashing your complete zip package without no wipes my phone is up and runnig with bluetooth and all the stuff working with no problems again ! I reported the issue above because I thought you may have missed to change some of the strigns that print that info right... Anyway your complete zip works like a charm so I din't have to wipe/reflash kdz from lg brige or lgup so thank you ! Here is my software info page now:
Coming from 20K. Flashed the complete ROM, SU (latest), Xposed 88.2. First boot was about 15 minutes! I almost gave up but after about 10 minutes "Android is upgrading" appeared so I waited more. I had no reception after the upgrade for few minutes (new radio to blame?). Now all seems normal.
I hope it will fix some bugs from 20K. Thanks @DavidFlint and @autoprime !
Does flashing the complete package overwrite TWRP? I'm thinking about going back to stock from Fulmics but bot quite sure how to proceed. Can anybody point me in the right direction?
Like do I flash the complete package, Magisk, and I'm good to go?
This still ARB 0 ?
thewhisper said:
Little report:
I flashed asgard kernel v7 and it totally screwed my bluetooth so I had to flash yours Flashable ZIP Boot: LG-H85020q-Flashable.Boot.zip to reverse the damage done by asgard as I didn't do any boot backup and this is what my software info says after flashed your zip. I was on stock kdz rom 20q version but now all seems screwed and also like your zip report like it is 20n version, see the attached image.
Click to expand...
Click to collapse
Don't know what you did to the Bluetooth but I'm on the latest firmware release from 3UK with the V20D bootloader and my kernel. Everything works with Bluetooth i.e. file transfers and audio streaming.
post image link
Sent from my LG-H850 using Tapatalk
Wow, that was fast! Works like a charme. Many thanks @DavidFlint!
(Battery drain problem seems to be still there, though)
It gives me the error about NT code, strangely I flashed the previous J and didn't have troubles.I have even Orange french bloatware, even if I flashed the one that says "ita" (italy) downloaded from the kdz repository, but I think they put yours as the same for all the europe, same name, same size...
I m on stock 20i EU Rom.. I don't touch anything
I want to update to 20q
How i can do it ?
Ysfzone said:
I m on stock 20i EU Rom.. I don't touch anything
I want to update to 20q
How i can do it ?
Click to expand...
Click to collapse
If you don't see an according automatic update on your phone, you have to flash the KDZ-file via LG UP.
Pro tipp: Use autoprime's UPPERCUT tool, this works very well!
BabelHuber said:
If you don't see an according automatic update on your phone, you have to flash the KDZ-file via LG UP.
Pro tipp: Use autoprime's UPPERCUT tool, this works very well!
Click to expand...
Click to collapse
I will lose any data ?
Ysfzone said:
I will lose any data ?
Click to expand...
Click to collapse
Try it out. I'd make a backup before flashing...
Dirty flashed LG-H85020q-Flashable.COMPLETE.zip in TWRP and flashed SU afterwards.
Coming from 20p ( EEE Europe GB/United Kingdom) or H85020p_00_EEO_GB_OP_0916.kdz, anyone know if this can be an issue?
thanks!
H850 20s EU is available to download
Hi,
Thank you for your work, very happy with it. H850 20s EU ROM is available as on air update. I'll be waiting for your zip release.
Thanks again for the good work.
mistery88 said:
Dirty flashed LG-H85020q-Flashable.COMPLETE.zip in TWRP and flashed SU afterwards.
Coming from 20p ( EEE Europe GB/United Kingdom) or H85020p_00_EEO_GB_OP_0916.kdz, anyone know if this can be an issue?
thanks!
Click to expand...
Click to collapse
I don't know about the ZIP, but if you flash the open eu KDZ on your phone you'll get warning about something. Somewhere on the phone there are settings that the ROM reads and it'll know you're not supposed to use open eu on EEO.
I think deleting the contents of cust partition will remove the warnings, you need root for that, or you can flash Fulmics rom, that should take care of it.
Stock Firmware H850 V20s OPEN EU ROM
There is a newer version available: H850 V20v. Thread: https://forum.xda-developers.com/lg-g5/development/stock-h850-20v-eu-rom-flashable-zips-kdz-t3788620
[Update 03-10-2018] Downloads removed to gain storage for newer versions.
KDZ-File: H85020s_00_OPEN_EU_OP_1114.kdz (MD5)
Flashable ZIP Complete: LG-H85020s-Flashable.COMPLETE.zip (MD5)
Flashable ZIP Boot: LG-H85020s-Flashable.Boot.zip (MD5)
Flashable ZIP Bootloader: LG-H85020s-Flashable.Bootloader.zip (MD5)
Flashable ZIP Modem: LG-H85020s-Flashable.Modem.zip (MD5)
Android 7.0
Patch level: 6 November 2017
Baseband: MPSS.TH.2.0.c1.4-00047-M8996FAAAANAZM-1.101802.1.109832.1
Kernel: 3.18.31
Build: NRD90U
Software version: V20s-EUR-XX
Changes according LG:
- Security updates
Instructions: Please use autoprime's H850 20D install directions here: https://forum.xda-developers.com/lg-g5/development/stock-h850-20d-eu-rom-flashable-zips-t3592762.
Works with TWRP 3.1.1 and SuperSu v2.82.
To build the ZIPs I used parts of autoprime's previous files. Thx again to him.
Disclaimer: This is not an official post by LG to update the firmware! Don't blame me if you destroy your phone. If you use these files and instructions you do it at your own risk!
Nice, android security patches from November already. Lg is getting less sloppy!
Nevertheless I'm not flashing yet, waiting for oreo ><
---------- Post added at 08:36 AM ---------- Previous post was at 08:35 AM ----------
Oh, thanks for your hard work DavidFlint 8)
Its working thanks.
can i just flash the ZIP (complete) over 20k without wiping anything?
collller said:
can i just flash the ZIP (complete) over 20k without wiping anything?
Click to expand...
Click to collapse
Worked for me. First boot can take forever sometimes.
i'm still using 10i.
is it possible to flash only *complete.zip-file or should i flash the kdz first?
mrmojoman said:
i'm still using 10i.
is it possible to flash only *complete.zip-file or should i flash the kdz first?
Click to expand...
Click to collapse
I flashed directly from 10 and it worked, but it is risky. I did full backup before doing so. I wish I could go back to 10 as easy. Android N isn't supported by few older apps and brings new bugs for me as: broken quick charge, higher battery consumption, less convenient quck switch. IMHO LG did a really slappy job with Nougat for G5.
MEGA upload would be better.
Hey @DavidFlint.
Thanks for your work
Seems 20t is out. Any chances for a zip?
I flashed this firmware, tried both .zip through twrp and .kdz through LGUP. I flashed it to remove a Vodafone UK logo when booting up.
For some reason the Software version says V20s-234-15 instead of V20s-EUR-XX but the rest is exactly the same? Why is that anyone knows? I got another LG G5 H850 and it says V20s-EUR-XX. Any difference?
This rom is battery hungry. Really bad battery.
Maybe it's time to change the battery (a luxury not many people have nowadays) or maybe take a look at some rogue app. My uptime improved with this ROM.
DenyDarko said:
Hey @DavidFlint.
Thanks for your work
Seems 20t is out. Any chances for a zip?
Click to expand...
Click to collapse
So I will whait for 20t too, thank you for your works, I can "dirty" update without wasting days
I send in my H850 for repair a month ago (USB-C port was loose and other things) and received the phone back with V20s-EUR-XX. Bootloader was re-locked and I submitted another request for the unlock.bin.
It would take a few weeks but they confirmed that i would receive a new unlock.bin due to the change in device-id
mistery88 said:
I send in my H850 for repair a month ago (USB-C port was loose and other things) and received the phone back with V20s-EUR-XX. Bootloader was re-locked and I submitted another request for the unlock.bin.
It would take a few weeks but they confirmed that i would receive a new unlock.bin due to the change in device-id
Click to expand...
Click to collapse
Weeks? I received the thing in minutes following the procedure
totalnoob34 said:
Weeks? I received the thing in minutes following the procedure
Click to expand...
Click to collapse
well, the original unlock.bin was indeed generated in a few seconds from the website however because my device-id changed during the repair, (IMEI was the same), so the original file was'nt working anymore. and had to be modified manually.
mistery88 said:
well, the original unlock.bin was indeed generated in a few seconds from the website however because my device-id changed during the repair, (IMEI was the same), so the original file was'nt working anymore. and had to be modified manually.
Click to expand...
Click to collapse
Ah, I see, thanks for the clarification. I may have to go through that process as well
papete said:
Maybe it's time to change the battery (a luxury not many people have nowadays) or maybe take a look at some rogue app. My uptime improved with this ROM.
Click to expand...
Click to collapse
Bought a new one but its the same with the old one. Apps are the same i used to have with marshmallow. I think nougat rom is the problem for the battery.
Will it restore the original recover if I flash it or the .zip is already without the recover or TWRP recover?
Do I need to flash magisk too after the .zip?
Diomorgan said:
Will it restore the original recover if I flash it or the .zip is already without the recover or TWRP recover?
Do I need to flash magisk too after the .zip?
Click to expand...
Click to collapse
Zips don't contain recovery, so you'll keep your recovery after flashing. You have to flash Magisk/SuperSU if you want root. If you want to stay unrooted then flash the noveriety zip.
Stock Firmware H850 V20v OPEN EU ROM
KDZ-File: H85020v_00_OPEN_EU_OP_0323.kdz (MD5)
Flashable ZIP Complete: LG-H85020v-Flashable.COMPLETE.zip (MD5)
Flashable ZIP Boot: LG-H85020v-Flashable.Boot.zip (MD5)
Flashable ZIP Bootloader: LG-H85020v-Flashable.Bootloader.zip (MD5)
Flashable ZIP Modem: LG-H85020v-Flashable.Modem.zip (MD5)
Android 7.0
Patch level: 1 March 2018
Baseband: MPSS.TH.2.0.c1.4-00047-M8996FAAAANAZM-1.101802.1.109832.1
Kernel: 3.18.31
Build: NRD90U
Software version: V20v-EUR-XX
Changes according LG:
- Security updates
Instructions: Please use autoprime's H850 20D install directions here: https://forum.xda-developers.com/lg-g5/development/stock-h850-20d-eu-rom-flashable-zips-t3592762.
Works with TWRP 3.1.1 and SuperSu v2.82.
To build the ZIPs I used parts of autoprime's previous files. Thx again to him.
Disclaimer: This is not an official post by LG to update the firmware! Don't blame me if you destroy your phone. If you use these files and instructions you do it at your own risk!
Is stock recovery included in the flashable ZIP so I have to delete it or no stock recovery included so I can flash straight? Thank you very much!
I don't know why for only a security patch, they make a whole new 2GB file. Why not making it like windows? that we can download only the patch file, and install.
A question: Can we root it? Because usually it has stock recovery, and we can't install TWRP and magisk through stock recovery. I tried it a lot with 20N and couldn't.
Diomorgan said:
Is stock recovery included in the flashable ZIP so I have to delete it or no stock recovery included so I can flash straight? Thank you very much!
Click to expand...
Click to collapse
SaidJan said:
A question: Can we root it? Because usually it has stock recovery, and we can't install TWRP and magisk through stock recovery. I tried it a lot with 20N and couldn't.
Click to expand...
Click to collapse
No, there is no stock recovery included in the ZIP archives. If you have TWRP installed you can just flash the "COMPLETE" ZIP. If you flash the kdz you will get the stock recovery.
To gain root just flash SuperSU after flashing the ZIP before reboot.
Hey @DavidFlint
Thank you for the port. I'm currently downloading it.
I was wondering.. do you mind creating a step-by-step how-to guide for anyone willing to make a flashable zip from KDZ like yours?
It'll be very useful and it'll be really appreciated by the community.
In the future you might not have time to do it etc etc so someone else can work on it.
Thanks for considering it
Thank you very much for this!
I was looking around in TWRP Recovery file manager what apk it was that was blocking me from using the phone after unlocking bootloader but I gave up when I found this.
Just out of curiosity, is it just an app or is it more that blocks after unlock + factory reset?
Has anybody rooted with magisk? Will I get stock recovery when I flash the "complete" zip with TWRP? I come from fulmics ROM. Thanks in advance.
fernseher said:
Has anybody rooted with magisk? Will I get stock recovery when I flash the "complete" zip with TWRP? I come from fulmics ROM. Thanks in advance.
Click to expand...
Click to collapse
Awnser is 3 posts above you. Complete ZIP has no stock recovery. Install via TWRP, and flash Magisk before reboot.
Xfades said:
Awnser is 3 posts above you. Complete ZIP has no stock recovery. Install via TWRP, and flash Magisk before reboot.
Click to expand...
Click to collapse
Thanks!
DavidFlint said:
Stock Firmware H850 V20v OPEN EU ROM
KDZ-File: H85020v_00_OPEN_EU_OP_0323.kdz (MD5)
Flashable ZIP Complete: LG-H85020v-Flashable.COMPLETE.zip (MD5)
Flashable ZIP Boot: LG-H85020v-Flashable.Boot.zip (MD5)
Flashable ZIP Bootloader: LG-H85020v-Flashable.Bootloader.zip (MD5)
Flashable ZIP Modem: LG-H85020v-Flashable.Modem.zip (MD5)
Android 7.0
Patch level: 1 March 2018
Baseband: MPSS.TH.2.0.c1.4-00047-M8996FAAAANAZM-1.101802.1.109832.1
Kernel: 3.18.31
Build: NRD90U
Software version: V20v-EUR-XX
Changes according LG:
- Security updates
Instructions: Please use autoprime's H850 20D install directions here: https://forum.xda-developers.com/lg-g5/development/stock-h850-20d-eu-rom-flashable-zips-t3592762.
Works with TWRP 3.1.1 and SuperSu v2.82.
To build the ZIPs I used parts of autoprime's previous files. Thx again to him.
Disclaimer: This is not an official post by LG to update the firmware! Don't blame me if you destroy your phone. If you use these files and instructions you do it at your own risk!
Click to expand...
Click to collapse
Thanks for your work - saved a lot of time to return to stock from Fulmics. Works great with Magisk too!
I hope you will do this again for future updates?
So based on research it seems I need to install the latest bootloader and modem on my phone to resolve a slow charging issue on resurrection remix 5.8.5.
Is it as simple as just flashing from within the latest TWRP or is this going to cause me to have to re-flash the OS, etc or unlock the bootloader again?
jhaedee said:
So based on research it seems I need to install the latest bootloader and modem on my phone to resolve a slow charging issue on resurrection remix 5.8.5.
Is it as simple as just flashing from within the latest TWRP or is this going to cause me to have to re-flash the OS, etc or unlock the bootloader again?
Click to expand...
Click to collapse
You won't lose anything - I did it on mine a year or so ago and it went smooth as butter
Just flash them in TWRP, it's basically an update and won't re-lock or wipe anything
Nimueh said:
You won't lose anything - I did it on mine a year or so ago and it went smooth as butter
Just flash them in TWRP, it's basically an update and won't re-lock or wipe anything
Click to expand...
Click to collapse
Thanks dude! This worked like a charm to fix thee charging issue :good:
jhaedee said:
Thanks dude! This worked like a charm to fix thee charging issue :good:
Click to expand...
Click to collapse
Dudette, not dude - but you're welcome :highfive:
Nimueh said:
Dudette, not dude - but you're welcome :highfive:
Click to expand...
Click to collapse
"Whoa! Thanks, chick-dude!"
On first boot got some error box come up..user error or something..is that normal
russy23 said:
On first boot got some error box come up..user error or something..is that normal
Click to expand...
Click to collapse
Not for me. Never ever had error boxes after flash...
Weird..well it's all good
Thanks..always feel good to delete everything through twrp..
Did you say the complete package goes back to stock recovery..can't get into twrp..do the usual key combos..select yes twice but no recovery comes up
russy23 said:
Weird..well it's all good
Thanks..always feel good to delete everything through twrp..
Did you say the complete package goes back to stock recovery..can't get into twrp..do the usual key combos..select yes twice but no recovery comes up
Click to expand...
Click to collapse
If you want to keep twrp with the complete zip you have to install supersu/magisk or no-verity-opt-encrypt. Use this https://forum.xda-developers.com/lg-g5/development/stock-h850-20d-eu-rom-flashable-zips-t3592762 as a guide.
DavidFlint said:
No, there is no stock recovery included in the ZIP archives. If you have TWRP installed you can just flash the "COMPLETE" ZIP. If you flash the kdz you will get the stock recovery.
To gain root just flash SuperSU after flashing the ZIP before reboot.
Click to expand...
Click to collapse
As quodet, the complete zip DON'T flash stock firmware, so something goes wrong with your phone. Try to flash it again.
russy23 said:
On first boot got some error box come up..user error or something..is that normal
Click to expand...
Click to collapse
Is normal: 2 popup with errors (one is about NTCODE, isn't it?):it's because the nationality of your phone is not the same (actually I don't know if it happens only when you make a "dirty update" from a firmware that is from your region, someone reported that using KDZ to flash first in "refurbished, than in "upgrade" will solve the problem), you have 2 solutions:
https://forum.xda-developers.com/lg-g5/how-to/cust-error-solution-t3507311 or the easyest one: make a backup of the CUST folder and delete what's inside!
I AM NOT RESPONSIBLE IF YOU MESS UP YOUR PHONE!!!
YOU HAVE BEEN WARNED!!!
Watch dogs is a ROM I created and it started with the OnePlus 9 Pro back in December. I have decided to bring it to the OnePlus 9, it's based on LineageOS & crDroid source & dependencies and I thank them for its use. SafetyNet and CTS passes whether your rooted or not. Modules not required. Most features are the same as crDroid but I have made some adjustments to bluetooth quality and some fonts that are not available there, plus Gapps are included.
Before you begin, if you don't have the latest platform tools installed on your windows machine. Download it here:
DO NOT FLASH GAPPS!!!! THEY ARE INCLUDED IN BUILD!!!!!
Flashing Instructions
First time installation (clean flash):
This update requires OOS 13.1 - 13.1.0.500(EX01) firmware
Backup your data
Download the ROM, and firmware flasher listed further down on this post and place all in your platform tools folder,
Extract all the contents in platform tools, Firmware flasher in folder.
You must flash firmware in bootloader.
Boot to recovery and factory reset then adb sideload
adb sideload WatchDogs-13.0-20230625-lemonade.zip
Reboot to system
reboot to recovery if you want root
adb sideload magisk.apk or adb sideload magisk.zip
Reboot to system
Update installation:
Updates can be sideloaded with custom recovery. Updates do not appear in system updater.
Sources:
ROM
Kernel
Downloads:
ROM
FIRMWARE FLASHER
Bugs?
Let me know.
Initial builds
WatchDogs-WITHGAPPS-13.0-20230312-lemonade.zip
WatchDogs-NOGAPPS-13.0-20230312-lemonade.zip
If you require Google apps, flash the first one only!
If you do not want Google apps, flash the second one only!
You can't cross dirty flash a update which should be common sense. Example, you can't dirty flash the with gapps build then next update, dirty flash the no gapps one.
I tried CRdroid recovery and the one I was on and both said name mismatch. Got any suggestions for me to try? Thank you for the new development too!
Telegram group please
lorilucille9 said:
I tried CRdroid recovery and the one I was on and both said name mismatch. Got any suggestions for me to try? Thank you for the new development too!
Click to expand...
Click to collapse
That's weird. Did you try sideloading the firmware flasher first before the ROM? If you still have difficulties, I will post the dtbo, boot and vendor_boot files for you to flash to make it compatible. I don't have this phone. I have the OnePlus9 Pro so I can't test it. I'm sure it works or there would be other users saying the same thing.
I flashed the firmware successfully and tried it again but still got the same error. It wouldn't hurt to post the kit files and recovery for others too. If you do then I'll try again before I have to head into work in a couple hours.
UPDATE:
I used the CrDroid boot-20230106 file and then sideloaded fw_Oneplus9_IN_OOS13_F20 on both slots and was able to flash the rom on both slots successfully. Will let you know what I find in time and thanks again for another version rom to pplay with
lorilucille9 said:
I flashed the firmware successfully and tried it again but still got the same error. It wouldn't hurt to post the kit files and recovery for others too. If you do then I'll try again before I have to head into work in a couple hours.
UPDATE:
I used the CrDroid boot-20230106 file and then sideloaded fw_Oneplus9_IN_OOS13_F20 on both slots and was able to flash the rom on both slots successfully. Will let you know what I find in time and thanks again for another version rom to pplay with
Click to expand...
Click to collapse
Good deal, and no problem. Since I use crDroid sources, I figured that should work. I will still post the files necessary to flash recovery when I get a chance. Let me know if there are any bugs or issues with the ROM itself so I can work on it. Thank you!
I installed it on my first try without any problems. but I couldn't understand how it differs from crdroid.
incesu571 said:
I installed it on my first try without any problems. but I couldn't understand how it differs from crdroid.
Click to expand...
Click to collapse
Bootanimation, fonts, bluetooth, sound audio and other tweaks.
TheSayaMan said:
Bootanimation, fonts, bluetooth, sound audio and other tweaks.
Click to expand...
Click to collapse
thx bro
TheSayaMan said:
Bootanimation, fonts, bluetooth, sound audio and other tweaks.
Click to expand...
Click to collapse
Not to mention Gapps included if you choose it so OTAs with no issues... otherwise you'd have to sideload Gapps again after at least for me that's what was happening.
lorilucille9 said:
Not to mention Gapps included if you choose it so OTAs with no issues... otherwise you'd have to sideload Gapps again after at least for me that's what was happening.
Click to expand...
Click to collapse
correct, sorry, forgot to mention that as well. Thank you!! crDroid doesn't offer a with gapps build. You can use the no gapps build to flash your own gapps but I won't support force close issues with the ROM. Example, pixel setup wizard can't be used because it interfers with the default launcher. And yes, on updates, just sideload the with gapps build and your done, unless you want root, then you will have to reboot and sideload magisk because root will be gone on a update.
incesu571 said:
Telegram group please
Click to expand...
Click to collapse
There is one in my 9 pro thread. I will update when I can.
I have op 9 t-mobile version le 2117, can you please guide me which firmware should i use IN, EU or NA?
Sady94 said:
I have op 9 t-mobile version le 2117, can you please guide me which firmware should i use IN, EU or NA?
Click to expand...
Click to collapse
Convert your T-Mobile to EU as listed on another thread, then you can use the EU firmware. I will be posting a update soon with the boot, vendor_boot and dtbo. If you don't want to do that, I will post them later to flash recovery on your phone. Keep in mind that different variants act different, so you may have bugs on T-Mobile, it wasn't tested.
screenshots?
pubmastervnt said:
screenshots?
Click to expand...
Click to collapse
Not by me, maybe someone else who is running it
MARCH UPDATES: 03/24:
WatchDogs-WITHGAPPS-13.0-20230324-lemonade.zip
WatchDogs-NOGAPPS-13.0-20230324-lemonade.zip
Sady94 said:
I have op 9 t-mobile version le 2117, can you please guide me which firmware should i use IN, EU or NA?
Click to expand...
Click to collapse
You can use my custom recovery, files added in OP. You still need latest stock A13.
fastboot flash --slot all boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img
You cant install this (or any rom but base 11) on tmobile 2117 without BL unlock key. Pretty sure its not possible.
You can only convert to base global 11\OOS11 on 2117 for root, then in ui updater doesnt work OTA or manually. You can get to 13 stock only, because you need to be stock to ota, where you need a key to unlock bootloader again (conversion would bring you back to 11).
*The rooting situation with this phone sucks. I think Jaguar is the only one that will work because it is base 11.