I'm on open beta 4 pie. Want to flash twrp to update to stable from open beta. Currently on stock recovery
And then want to root to have high brightness mode magisk module.
Please Help me how to do?
I really hate just writing this but:
There are people that have written guides for all that you ask for. Please use the forum as intended, this questions have been asked alot of times, in your previous thread I also gave you answers if you don't like em say so there instead of making a new thread.
I'll do this one more time....
Fastboot blu_spark twrp 985v2. Img
While in twrp flash blu_spark twrp 985v2.zip
REBOOT to twrp
Flash the full rom.zip
Flash blu_spark twrp 985v2.zip again
REBOOT to twrp
Flash magisk 17.2
Reboot to system
This is the way I did it from beta 3 to stable..... Worked 100%
From 4 to stable should be the same way..
https://forum.xda-developers.com/devdb/project/?id=27466#downloads link to download of twrp img and zip
Related
Hello guys i successfully unlocked Bootloader now i want to root my Nokia 3 via magisk i don't want twrp i just want boot img for magisk but for that i need root i try many apps for rooting but unsuccessfull i want to root then get boot img then unroot then root from magisk please help me.
mudit johari said:
Hello guys i successfully unlocked Bootloader now i want to root my Nokia 3 via magisk i don't want twrp i just want boot img for magisk but for that i need root i try many apps for rooting but unsuccessfull i want to root then get boot img then unroot then root from magisk please help me.
Click to expand...
Click to collapse
You can boot twrp without flashing and then flash root
https://forum.xda-developers.com/no...w-to-unlock-bootloader-nokia-3-t3699344/page2
Check post #15 by @SkaboXD
But when i flash twrp recovery then i go to recovery and ask for password i cancel it then ask for system modifications I'm confused so i dont give permission to twrp for system modifications then i flash magisk zip then wipe cache of dalvik cache and reboot then its stuck in bootloop
mudit johari said:
But when i flash twrp recovery then i go to recovery and ask for password i cancel it then ask for system modifications I'm confused so i dont give permission to twrp for system modifications then i flash magisk zip then wipe cache of dalvik cache and reboot then its stuck in bootloop
Click to expand...
Click to collapse
You said you wanted root, you were supposed to use the process to get root not flash magisk. I thought you had a method of installing magisk after getting root. I thought you were going to boot twrp recovery, not flash it, since you said you didn't want twrp.
Unfortunately you're going to have to flash stock with OST.
Check this link for more information:
https://forum.xda-developers.com/nokia-3/development/nokia-3-official-firmware-india-uae-t3674320
yeah now i got twrp but only come when boot from fastboot commands and i want magisk how can i get it?
did i have to first flash supersu zip from twrp then install magsik? but i want only magisk not supersu
mudit johari said:
did i have to first flash supersu zip from twrp then install magsik? but i want only magisk not supersu
Click to expand...
Click to collapse
I have never actually used magisk. I thought you had a way of installing/flashing magisk once you had root
I try installing magisk by flashing magisk zip from twrp but got bootloop
mudit johari said:
I try installing magisk by flashing magisk zip from twrp but got bootloop
Click to expand...
Click to collapse
Might I ask: what do you need magisk for?
Also in that recovery I got errors like can't Mount and some kind of encryption error and it say's I have to format data
Need magisk for root and modules as also I want all updates properly installed means i want to in stock recovery
mudit johari said:
Also in that recovery I got errors like can't Mount and some kind of encryption error and it say's I have to format data
Click to expand...
Click to collapse
In my opinion, only use the recovery for flashing stuff, don't mount anything other than sdcard, don't unlock. Maybe when there is a more compatible version of twrp ...
---------- Post added at 02:00 PM ---------- Previous post was at 01:17 PM ----------
mudit johari said:
Need magisk for root and modules as also I want all updates properly installed means i want to in stock recovery
Click to expand...
Click to collapse
Well i don't know about the modules, but when I flashed stock firmware with OST (first time I flashed recovery my phone was stuck in twrp) then flashed root and xposed, I was still able to install updates. The stock firmware I installed was 7.0, but now i'm on the most recent update. So unless there are some specific modules that you need from magisk, I think you can stick with the regular root.
On the other hand you can continue to experiment with magisk, maybe you will find something that we don't know yet and get it working. But remember, if you want to flash anything, don't format with twrp at all, just leave everything readonly and flash
I'm not able to go to recovery by buttons. Only by fastboot command why is that?
What the hell is this i just try to go to recovery by buttons it works but I'm on stock recovery but i flashed twrp then i format data did formatting data did something to recovery? Or is it that i have to use fastboot command to go to twrp recovery? Where the hell is that recovery?
mudit johari said:
What the hell is this i just try to go to recovery by buttons it works but I'm on stock recovery but i flashed twrp then i format data did formatting data did something to recovery? Or is it that i have to use fastboot command to go to twrp recovery? Where the hell is that recovery?
Click to expand...
Click to collapse
I don't know; the process of flashing recovery on HMD's nokias isn't yet fully developed, people have complained about flashing recovery but still not booting into it. Personally I would recommend that you use stock recovery and use fastboot to boot into twrp instead of actually flashing twrp whenever you want to flash anything. That way you are still able to install system update
But for installing magisk every where written that flash magisk zip from twrp but i got bootloop
mudit johari said:
But for installing magisk every where written that flash magisk zip from twrp but i got bootloop
Click to expand...
Click to collapse
Have you flashed stock firmware with OST? Can you boot normally now? If not, do that, then update ti the current android version using OTA. After that boot into twrp (whether you chose to flash twrp or just boot twrp is up to you). Do a backup then try flashing magisk again, maybe it will work this time
Yeah i already flashed stock rom with ost and already update to latest version i think magisk is not supported in Nokia 3
mudit johari said:
Hello guys i successfully unlocked Bootloader now i want to root my Nokia 3 via magisk i don't want twrp i just want boot img for magisk but for that i need root i try many apps for rooting but unsuccessfull i want to root then get boot img then unroot then root from magisk please help me.
Click to expand...
Click to collapse
Hello mate, you can't root nokia 3 with Magisk. Why? Because noone never send boot img to dev! So only option to root it is Chainfire SuperUser 2.79v.
Ok brother but i have a question if i root and then remove some system apps then can I safely install updates?
I cannot find anything on point to this direct question (all the guides/forums seem to have you flashing/installing TWRP first then installing Magisk).
I am already unlocked and installed Magisk/rooted with Magisk SU by using the Magisk Manager method with stock recovery.
At this point can I just flash/install TWRP to have a custom recovery without issue? I ask because I want to try out J to the 4n's Active Edge plus but want to make a backup first before tinkering with it. Loved his stuff as a long HTC viper guy.
Thanks in advance.
bakemcbride21 said:
I cannot find anything on point to this direct question (all the guides/forums seem to have you flashing/installing TWRP first then installing Magisk).
I am already unlocked and installed Magisk/rooted with Magisk SU by using the Magisk Manager method with stock recovery.
At this point can I just flash/install TWRP to have a custom recovery without issue? I ask because I want to try out J to the 4n's Active Edge plus but want to make a backup first before tinkering with it. Loved his stuff as a long HTC viper guy.
Thanks in advance.
Click to expand...
Click to collapse
I cannot find the specific thread (if I do find it I will update) but from what I recall you will need to flash an unpatched boot img and then flash twrp. After that you can reinstall Magisk. I know TWRP modifies the boot so that will interfere with Magisk. I hope this was helpful.
xBlu3 said:
I cannot find the specific thread (if I do find it I will update) but from what I recall you will need to flash an unpatched boot img and then flash twrp. After that you can reinstall Magisk. I know TWRP modifies the boot so that will interfere with Magisk. I hope this was helpful.
Click to expand...
Click to collapse
Extremely helpful! Sounds like I would boot loop the phone if I just flashed TWRP in my current configuration.
I'll uninstall magisk, reboot, then flash the stock boot.img and then follow the twrp/magisk install directions.
Much appreciated!
Here's what I did:
1) Boot twrp img file from fastboot
2) Flash the latest twrp zip in twrp. DON'T REBOOT. If you are going to use a custom kernel, you must do step 3 below. Don't later reboot and flash a custom kernel or you can run into bootloader signature issue. If you ARE NOT going to use a custom kernel, jump to step 4.
3) Flash your custom kernel.
4) Flash the latest Magisk zip to root again
5) Reboot.
Enjoy
I am using the Oos 5.1.5 and running unofficial TWRP 3.2.1-0 (i think, but sure its the unofficial build). I am rooted using magisk 16.4.
I want to upgrade to oos 5.1.6 using the zip file and also be rooted and also upgrade to twrp official version for oneplus 6 (if its better than unofficial).
So i want to upgrade to oos 5.1.6 using the twrp through the oos zip file.
If its possible please guide me. Btw i dont want to lose twrp or root or magisk......
Thank you in advance.....
I have upgraded my device using vpn for my phone now frequently freezes after so.e time of usage. I need to than power off and on the phome again.
You will lose twrp, root and magisk when you upgrade - it is unavoidable because of how the A/B partitions work. However , it's easy to get back.
There are multiple how-to guides in the Guides forum. Here's one: https://forum.xda-developers.com/oneplus-6/how-to/how-to-update-oos-5-1-6-install-t3801822
Just download the full zip locally. Flash it in twrp. Boot into fastboot. Flash twrp boot img through adb command which boots you into temporary official twrp. Then flash the official OP5 twrp zip which your can find through Google. Reflash magisk.
Suraj6ironman said:
I am using the Oos 5.1.5 and running unofficial TWRP 3.2.1-0 (i think, but sure its the unofficial build). I am rooted using magisk 16.4.
I want to upgrade to oos 5.1.6 using the zip file and also be rooted and also upgrade to twrp official version for oneplus 6 (if its better than unofficial).
So i want to upgrade to oos 5.1.6 using the twrp through the oos zip file.
If its possible please guide me. Btw i dont want to lose twrp or root or magisk......
Thank you in advance.....
Click to expand...
Click to collapse
Reboot recovery
Flash twrp installer zip (official)
Reboot twrp
Flash 5.1.6 full rom
Flash twrp installer zip ( official)
Flash magisk 16.0
Wipe cache/davlik
Reboot system
I am rooted with custom kernel and recovery. What's the best way to take the ota?
What ota??
Before you create a thread here, please be more specifice. And use the SEARCH button.
I think you are trying to upgrade from 5.1.8 to 5.1.9.
There is a official thread here on xda. And everything is there explained, about how to update to the new version.
The way I did:
1. Flash full 5.1.9.zip
2. Flash twrp.zip
3. Reboot to recovery.
4. Flash Magisk.
5. Clear dalvik cache.
There is a dedicated thread for questions like this.
https://forum.xda-developers.com/oneplus-6/how-to/official-oxygenos-5-1-5-ota-oneplus-6-t3794232
I just took the ota, then flashed WRP followed by Magisk
Ghost123NL said:
Before you create a thread here, please be more specifice. And use the SEARCH button.
I think you are trying to upgrade from 5.1.8 to 5.1.9.
There is a official thread here on xda. And everything is there explained, about how to update to the new version.
The way I did:
1. Flash full 5.1.9.zip
2. Flash twrp.zip
3. Reboot to recovery.
4. Flash Magisk.
5. Clear dalvik cache.
Click to expand...
Click to collapse
Hi, I'm planning to root my op6. Im not sure how the A\B partition thingy works so just trying to clear some doubts. After you flash the full zip in twrp in 2nd step by "flashing twrp" you mean flashing the twrp installer or you lose twrp and flash it using fastboot?
mohdfahad47 said:
Hi, I'm planning to root my op6. Im not sure how the A\B partition thingy works so just trying to clear some doubts. After you flash the full zip in twrp in 2nd step by "flashing twrp" you mean flashing the twrp installer or you lose twrp and flash it using fastboot?
Click to expand...
Click to collapse
just flash the installer right after rom and you are good to go
If u don't need TWRP and happy with magisk, u can install ota with official updater and after that (before reboot) go into magisk and do --> install--> install to inactive slot (after ota). That's all.
After reboot you have updated system with magisk installed. I do this all the time.
I'm running stock ROM on unlocked bootloader with root through Magisk. I've been using TWRP, but changed over to Blu_spark TWRP recently.
Every time I update my OS Ota, I lose TWRP and Magisk. The Magisk app is installed, but the ROM is not rooted. If course, if I try to install patch the system so it's rooted through the Magisk app, it says that it can't unpack the file. If I reboot to recovery to install from there, I get the stock recovery, not TWRP.
I tried to re-install TWRP and Magisk once before, and borked my phone. I had to quote and start from scratch. I lost all data since I wasn't rooted and Titanium Backup would not run.
What is the proper way to get TWRP and Magisk back after an OTA update?
Flash them after you flash update zip. If you don't you will lose recovery and root every time. Gets overwritten by stock recovery. Normal behavior
Sent from my ONEPLUS A6003 using Tapatalk
So you're saying that instead of doing the OTA update, I should download the update from here, and manually update it ? Can I just install the update? I'm rooted, (well, I was) so the OTA will only download the full update. Is that required instead of the update?
I really have to do a full re-install for every update? That sucks. A lot.
Full reinstall? No. You just have to flash the full ROM. This doesn't mean, you'll loose all your data: Just TWRP, Magisk and (if you have it) your custom kernel. You only have to flash TWRP (or simply boot into it), Magisk and kernel (again: if you have it) after the update. Done.
MickyFoley said:
Full reinstall? No. You just have to flash the full ROM. This doesn't mean, you'll loose all your data: Just TWRP, Magisk and (if you have it) your custom kernel. You only have to flash TWRP (or simply boot into it), Magisk and kernel (again: if you have it) after the update. Done.
Click to expand...
Click to collapse
Ok. Cool. I tried that last time, but it failed. As a result, I'm a bit anxious about doing it again. Hopefully, I won't have any problems this time.
Thanks for the info.
I have had similar troubles as you, here's an overview of how to solve those problems.
OTA through OS:
Download and install OTA
Use Magisk Manager to download the TWRP A/B retention script and install it
Install Magisk to current and inactive slot
Reboot
Guys I am using latest blu_spark twrp. my bootloader is unlocked and I am running oxygenOS openbeta23. Following is my problem.
My flash order: (Note: already I have bue_spark twrp recovery running without issues)
1. Flash the full OTA(openbeta)
2. Flash the blu_spark twrp zip file on both active and non active slots.
3. Flash the latest magisk zip file. If step 3 is not successful means I will try to reboot in to recovery and again flash the magisk installer zip.
Until some time back all this worked fine. But for last 2-3 times although the flashing process of twrp zip on both slots ends with success message, when I reboot to recovery from twrp in order to flash magisk, the device boots in to stock recovery. I don't know how even after flashing twrp zip on both slots successfully why the devices bootbback to stock recovery. Then to have blu_spark twrp I have to connect my device to a computer in fastboot mode and then boot in to custom recovery using the blu_spark twrp image file and again flash the blu_spark twrp zip file which is inconvenient and also requires a computer.
Am I missing anything here?? If yes why this method was working perfectly before? Please somebody help.
Regards,
Sivabalan K
I flash in following order my stable updates
Flash full rom zip
Flash bluespark recovery
Restart into bluespark recovery
Flash magisk
Restart into Android
Everything works flawless. Magisk installed with all the modules running
Hi guys,
Don't you need to disable lock pattern/PIN or fingerprint/face ID? And don't need to uninstall magisk modules?
I never update my OP6 from my initial unlock/twrp/magisk and I'm a bit anxious to do it now...
Thanks
PS : I'm using original twrp (3.2.3-1), is this a problem?