Related
I have a Xperia Z5 UK model E6653. But it does not have Volte enabled? Any idea on how to enable it?
I have tried the following:
1. Tried installing EE firmware to check if VoLTE is getting enabled
2. Ran the code *#*#4636#*#* and check for VoLTE provisioning flag. The flag is present but I am unable to toggle it. It displays Turn Off VoLTE provisioning flag.
Any help would be appreciated. Please note that I am currently with Virgin 4G plan.
livelyyoungman said:
I have a Xperia Z5 UK model E6653. But it does not have Volte enabled? Any idea on how to enable it?
Click to expand...
Click to collapse
The patch has not been tested in the call to HD since my carrier does not support VoLTE.
The patch activates flags VoLTE.
And yet, you need to find the settings of the access point to the IMS operator, and enter them in the APN.
Install the patch via twrp recovery.
Firmware 32.3.A.0.376.
samavar89 said:
The patch has not been tested in the call to HD since my carrier does not support VoLTE.
The patch activates flags VoLTE.
And yet, you need to find the settings of the access point to the IMS operator, and enter them in the APN.
Install the patch via twrp recovery.
Firmware 32.3.A.0.376.
Click to expand...
Click to collapse
Works great on e6683. 376fw
No reebot on sim on/off
But receive weak network indoors
Voice calling not working on volte
rajdeep312 said:
Voice calling not working on volte
Click to expand...
Click to collapse
Thank you for the test, I will continue to test.
You can try to change the modem in accordance with its operator.
For this you need to modify the line ro.build.type=user to ro.build.type=userdebug in /system/build.prop and reboot the device.
Then you need to install QuickShortcutMaker and click on the Customization Selector and make a shortcut for the Modem Switcher.
After opening the Modem Switcher, select the modem in accordance with its operator.
And most importantly, you need the original keys TA (maybe). Them in - you can invest using the Trim Area Of Proof Of Concept. Continue to test.
Beta 2.3 will activate VoLTE and Wi-Fi Calling.
not working in my z5 dual
livelyyoungman said:
I have a Xperia Z5 UK model E6653. But it does not have Volte enabled? Any idea on how to enable it?
I have tried the following:
1. Tried installing EE firmware to check if VoLTE is getting enabled
2. Ran the code *#*#4636#*#* and check for VoLTE provisioning flag. The flag is present but I am unable to toggle it. It displays Turn Off VoLTE provisioning flag.
Any help would be appreciated. Please note that I am currently with Virgin 4G plan.
Click to expand...
Click to collapse
I flashed it, but volte option is not available in my z5.. M using jio sim
---------- Post added at 03:15 AM ---------- Previous post was at 03:12 AM ----------
livelyyoungman said:
I have a Xperia Z5 UK model E6653. But it does not have Volte enabled? Any idea on how to enable it?
I have tried the following:
1. Tried installing EE firmware to check if VoLTE is getting enabled
2. Ran the code *#*#4636#*#* and check for VoLTE provisioning flag. The flag is present but I am unable to toggle it. It displays Turn Off VoLTE provisioning flag.
Any help would be appreciated. Please note that I am currently with Virgin 4G plan.
Click to expand...
Click to collapse
I flashed it, but volte option is not available in my z5 dual 6683..m using jio sim card
samavar89 said:
You can try to change the modem in accordance with its operator.
For this you need to modify the line ro.build.type=user to ro.build.type=userdebug in /system/build.prop and reboot the device.
Then you need to install QuickShortcutMaker and click on the Customization Selector and make a shortcut for the Modem Switcher.
After opening the Modem Switcher, select the modem in accordance with its operator.
And most importantly, you need stock keys TA. Them in - you can invest using the Trim Area Of Proof Of Concept. Continue to test.
Click to expand...
Click to collapse
Volte on working on beta 2 version
rajdeep312 said:
Volte on working on beta 2 version
Click to expand...
Click to collapse
After some time, I'll test the patch on a suitable operator.
samavar89 said:
Thank you for the test, I'm glad the beta is working! After some time, I'll test the patch on a suitable operator.
Click to expand...
Click to collapse
Sorry but volte not working only calling possible on specific app
rajdeep312 said:
Sorry but volte not working only calling possible on specific app
Click to expand...
Click to collapse
The operator gave You the opportunity to make a VoLTE call?
samavar89 said:
The operator gave You the opportunity to make a VoLTE call?
Click to expand...
Click to collapse
Yes but in india fw volte calls works from stock dialer
But after flashed your patched volte showing in settings but unable to call from stock dialer
I downgraded to MM 6.0 from 7.0 because i dont like 7.0 using Flashtool. Now the problem is I dont find any VoLTE option under More Network Settings. So I couldnt call from my Jio. Please anybody help me.
Xperia Z5 Dual E6683
sulthanbatcha said:
I downgraded to MM 6.0 from 7.0 because i dont like 7.0 using Flashtool. Now the problem is I dont find any VoLTE option under More Network Settings. So I couldnt call from my Jio. Please anybody help me.
Click to expand...
Click to collapse
You can try to install the patch for the firmware 32.2.A.5.11, but I can't guarantee stable work.
You need to change the modem in accordance with its operator, and add the profile to the IMS APN.
Then you need to install QuickShortcutMaker and click on the Customization Selector and make a shortcut for the Modem Switcher. After opening the Modem Switcher, select the modem in accordance with its operator.
Who installed these patches, please write if it works with your carrier.
A few days ago, wanted to test the patch, but failed. Operator is not connected IMS me as the phone has not been tested on their support for VoLTE.
After installation, you need to choose a modem in accordance with its operator.
You need to install QuickShortcutMaker, then open it to make a shortcut using the app then go to Customisation Selector \ Modem Switcher. Open Modem Switcher and select modem according to your network operator. If the selection of the modem's cellular network is not, then restart the phone.
You also need to restore the access point default to the new profile activated! ( Settings>More>Mobile network>APN>Reset to default )
If VoLTE does not work and You know that your operator you hooked VoLTE, then you need to change the APN in the profile apns-conf.xml (patch_ims_for_xperia_z5_beta_Nougat_Roms.zip\oem\android-config\apns-conf.xml). You need to find the profile of the IMS of the operator and to add to the "type" parameter "xcap". You should get something like this:
Code:
<apn carrier="Test IMS"
mcc="001"
mnc="01"
apn="ims"
type="ims,xcap"
protocol="IPV4V6"
roaming_protocol="IPV4V6"
/>
And most importantly, you need the original keys TA.
IMS description
RCS description
If VoLTE doesn't work, you will have to edit the "nv item" or "amss_fsg_***.mbn" (\system\etc\customization\modem\).
Maintain feedback to know if the patch is working.
Updated patch VoLTE.
info
new patch
grayleshy said:
Updated patch VoLTE.
info
- fix apns-conf.xml
Click to expand...
Click to collapse
Hi @grayleshy,
I would like to ask this patch will work with all bands and all operators?
My operator Turkcell in Turkey, it supports VoLTE&VoWifi but not Z5.
Only:
- iPhone 6, 6 Plus, 6S, 6S Plus, 7, 7 Plus, SE
- Samsung S6, S6 Edge, S7, S7 Edge
- LG K10 (2017 model), G4, G5, V20
If not work, how can we add this for Turkey operators (Turkcell, Vodafone, Turk Telekom)?
sceryavuz said:
I would like to ask this patch will work with all bands and all operators?
Click to expand...
Click to collapse
This patch activates only support of VoLTE and Wi-Fi Calling.
sceryavuz said:
If not work, how can we add this for Turkey operators (Turkcell, Vodafone, Turk Telekom)?
Click to expand...
Click to collapse
For start on these operators it is necessary to make the following:
1. It is necessary to edit an APN profile (patch_ims_for_xperia_z5_beta_Nougat_Roms.zip\oem\ android-config\apns-conf.xml ; patch_ims_for_xperia_z5_beta_Nougat_Roms.zip\data\customization\ota-config\apns-conf.xml)
Find mcc="286" and change the profile Turkcell IMS at:
Code:
<apn carrier="Turkcell IMS"
mcc="286"
mnc="01"
apn="ims"
type="ims,xcap"
protocol="IPV4V6"
/>
Add:
Code:
<apn carrier="Vodafone IMS"
mcc="286"
mnc="02"
apn="ims"
type="ims,xcap"
protocol="IPV4V6"
/>
<apn carrier="AVEA IMS"
mcc="286"
mnc="03"
apn="ims"
type="ims,xcap"
protocol="IPV4V6"
/>
XCAP - The software of the smartphone sees access point of ims and requests a configuration according to the xcap protocol. In reply, from server side, xhml the response which loads in a software arrives and makes authorization on the ims domain with the subsequent activation of a functionality on the device.After a flashing of the changed apn, it is necessary to make so: Settings>More>Mobile network>APN>Reset to default.
2. If the operator does not support protocol xcap, you will have to edit the "nv item" (easier) or configurators amss_fsg_***.mbn.
Hi @grayleshy
Thanks for your reply.
I tried XCAP for 2 zips, but not work. I tried to change amss_fsg_***.mbn, not for Turkcell. I don't know what "nv item" is. Found this thread, but don't know what should I do with this.
Hi there,
First, my apologies for my English ( I am not English native speaker) anyhow,
Today I managed to change my LG V20 H990DS AME ( Middle east ) to AU (Australia).
And one of the bounces I got is VoLte icon (Still didn't confirm if it is actually working)
The procedure doesn't require to flash a new rom, all what you need to do is the following:
- go to the root and find the folder /CUST (Use any root explorer)
- Open "open_path_mapping.cfg" and "op_list.cfg"
- You will see AU and AME have unique values ( in my case 57 for AU and 71 for AME).
- in both files write AU value for AME and vice versa.
- do factory reset ( all AU APKs and frameworks will be installed automaticly instead of AME stuff).
- once your mobile opened, in initialization wizard, Australia will be the default country.
- You will find the VoLte in the hidden tiles.
I am still exploring new changes.
Wish you all the luck.
Regards...
Note:
- This is experimental procedure, do it on your own responsibility.
- You can backup all your apps and files using LG backup, and you can restore them once the procedure is done.
- Same procedure can be done to all LG V20 phones
Wouldn't it have been easier using KDZWriter?
This is only sn alternative way of doing it.
Moreover, KDZWriter didn't work in my case.
why do you need volte in middle east anyway ?
lg v20 h990ds here with latest gcc rom and mk2000 v1.5 kernel systemless root magisk xposed
sniper9911 said:
why do you need volte in middle east anyway ?
lg v20 h990ds here with latest gcc rom and mk2000 v.15 kernel systemless root magisk xposed
Click to expand...
Click to collapse
I don't understand the reason for this question, but the answer, because most of the mobile networks here support VoLTE.
H990DS for GCC doesn't support VoLTE.
yeah i know they support ... but what is the actual advantage ... i dont see it sorry
if you know what kind of applications for this volte service let me know
sniper9911 said:
yeah i know they support ... but what is the actual advantage ... i dont see it sorry
if you know what kind of applications for this volte service let me know
Click to expand...
Click to collapse
I assume that the OP is living in India, and an user of Reliance Jio. In case you don't know, that particular Indian carrier only has 4G bands, so if your phone doesn't support VoLTE, you won't be able to make calls at all on that carrier.....
Not without Jio's app I guess. But everyone seem to hate it.
phamanhvu01 said:
I assume that the OP is living in India, and an user of Reliance Jio. In case you don't know, that particular Indian carrier only has 4G bands, so if your phone doesn't support VoLTE, you won't be able to make calls at all on that carrier.....
Not without Jio's app I guess. But everyone seem to hate it.
Click to expand...
Click to collapse
wow ... why would they limit themselves for that band only .... thanks for the answer
sniper9911 said:
wow ... why would they limit themselves for that band only .... thanks for the answer
Click to expand...
Click to collapse
I dunno, cost-cutting I guess since Jio has some of the cheapest plan in Inida. You're welcome though.
Did it work for you?
T-Mobile US H990DS user here, I converted to ESA instead of AU and have not factory resetted (is it really necessary). I also edited my MCC and MNC into the config files for ESA and the icon does show up but IMS never connects.\
I posted further on this here:
https://forum.xda-developers.com/v20/development/enabling-ims-v20-h990ds-t3790486
p7810456 said:
Did it work for you?
T-Mobile US H990DS user here, I converted to ESA instead of AU and have not factory resetted (is it really necessary). I also edited my MCC and MNC into the config files for ESA and the icon does show up but IMS never connects.\
I posted further on this here:
https://forum.xda-developers.com/v20/development/enabling-ims-v20-h990ds-t3790486
Click to expand...
Click to collapse
Yes, it is required to do a factory resit, as e.g. some of AME apps are different than AU apps and those apps will be installed during first run after device format.
In your case the information only will be cganged, but not the apps as well.
MaZeNsMz said:
Yes, it is required to do a factory resit, as e.g. some of AME apps are different than AU apps and those apps will be installed during first run after device format.
In your case the information only will be cganged, but not the apps as well.
Click to expand...
Click to collapse
What partitions do I format and can I keep my internal storage if not my apps?
p7810456 said:
What partitions do I format and can I keep my internal storage if not my apps?
Click to expand...
Click to collapse
TO be hones I am not sure, please check yourself if formatting "Storage" partition is the one. Of course all your data will be deleted. So, in all cases back up all partitions using TWRIP and move your data to external io external flash before proceeding.
You may also use LG backup, to back up all apps and their data, so after formatting "Storage" you will be able to restore all apps and their data.
Please do a little search about this procedure.
Regards...
MaZeNsMz said:
Hi there,
First, my apologies for my English ( I am not English native speaker) anyhow,
Today I managed to change my LG V20 H990DS AME ( Middle east ) to AU (Australia).
And one of the bounces I got is VoLte icon (Still didn't confirm if it is actually working)
The procedure doesn't require to flash a new rom, all what you need to do is the following:
- go to the root and find the folder /CUST (Use any root explorer)
- Open "open_path_mapping.cfg" and "op_list.cfg"
- You will see AU and AME have unique values ( in my case 57 for AU and 71 for AME).
- in both files write AU value for AME and vice versa.
- do factory reset ( all AU APKs and frameworks will be installed automaticly instead of AME stuff).
- once your mobile opened, in initialization wizard, Australia will be the default country.
- You will find the VoLte in the hidden tiles.
I am still exploring new changes.
Wish you all the luck.
Regards...
Note:
- This is experimental procedure, do it on your own responsibility.
- You can backup all your apps and files using LG backup, and you can restore them once the procedure is done.
- Same procedure can be done to all LG V20 phones
Click to expand...
Click to collapse
Were you able to connect ?
p7810456 said:
Did it work for you?
T-Mobile US H990DS user here, I converted to ESA instead of AU and have not factory resetted (is it really necessary). I also edited my MCC and MNC into the config files for ESA and the icon does show up but IMS never connects.\
I posted further on this here:
https://forum.xda-developers.com/v20/development/enabling-ims-v20-h990ds-t3790486
Click to expand...
Click to collapse
nkirk said:
Were you able to connect ?
Click to expand...
Click to collapse
Connect to what ?!
MaZeNsMz said:
Connect to what ?!
Click to expand...
Click to collapse
Volte and make calls?
nkirk said:
Volte and make calls?
Click to expand...
Click to collapse
My cell number is from "Zain", in Zain they allow Wifi calling and VoLte for Iphones only. So I didn't test that.
MaZeNsMz said:
My cell number is from "Zain", in Zain they allow Wifi calling and VoLte for Iphones only. So I didn't test that.
Click to expand...
Click to collapse
Ok. Are you able to see the options in the call setting to enable advanced calling /Volte?
VoLte is not there, I found it only in the main sliding menu in the main screen.
https://ibb.co/jx6rFo
Ok. Sometime back I also managed to enable the hidden menu options (ims)with lots of XML edits in cust folder and a factory reset. But volte never connected. Also the options were not visible in call settings menu. I had to stop testing as this was my main device. Need to test more but the factory rest is keeping me from doing it.
Would you know any region which has VOLTE enabled by default for global carriers? I could try flashing the cus partition and see. Mine is sea. Only has official VOLTE enabled for SG and TW carriers.
Why:
You imported the phone to India from another country and now VoLTE doesn't work for you. Maybe you unwittingly messed with your phones "/odm" partition.
This guide will help you get back the VoLTE functionality for INDIAN MOBILE CARRIERS*. Participate in the poll you want similar guide for other countries.
*might work for Bangladesh, Nepal etc.
Before:
Make sure your carrier supports VoLTE or VoWiFi.
Stock or stock based ROMs.
You should have at least TWRP or root.
Where:
Download the UNFLASHABLE files from here.
How:
-=:TWRP METHOD:=-
Extract the downloaded file, "volte_twrp.zip", to the root of your internal or external storage.
Internal Storage: /storage/emulated/0/TWRP (may not be the same for you)
External Storage: /storage/0000-0000/TWRP (may not be the same for you)
Reboot to recovery.
Select "Backup" from TWRP menu.
Hit "Select Storage".
Select the storage you extracted the downloaded file to.
You should see "2019-05-22-05-24-06_treble....". Select it.
You should see a single entry for "/odm" under "Select Partitions to Restore". Select it if it isn't already.
Uncheck "Enable Digest Verification..."
Swipe to restore. Restart to "System".
-=:root METHOD:=-
I haven't tried this. Let me know!
With your favorite file explorer obtain root access for "/odm".
Replace contents of "/odm" with files extracted from the downloaded file, "volte_root.zip".
Restart.
Good tutorial, but wouldn't be easier just to flash with odin the modem and csc for the specific carrier? It works even on Pie with older oreo modem/csc. You don't need root or twrp.
Tested myselsf, first Pie update was for Russia. Flashed it, but I lost wifi call and volte. So i downloaded oreo stock for my country(Romania - Orange) and flashed the modem and csc. Got back wifi call and volte.
kimitza said:
Good tutorial, but wouldn't be easier just to flash with odin the modem and csc for the specific carrier? It works even on Pie with older oreo modem/csc. You don't need root or twrp.
Tested myselsf, first Pie update was for Russia. Flashed it, but I lost wifi call and volte. So i downloaded oreo stock for my country(Romania - Orange) and flashed the modem and csc. Got back wifi call and volte.
Click to expand...
Click to collapse
This method only works if both the firmwares are for the same model. For examples I cannot flash Indian(SM-A750FN) firmware on a device I obtained from Malaysia(SM-A750GN) because they are different models (FN<->GN). For more information read my other guide.
Hi my phone model SM-A750FN, purchased in Europe and using in India and volte not working , only jiovoice call app working . With this app I can't access bank apps due auto verification failure ... I checked the CSC available list and I didn't found Indian CSC .... Please help me what to do
ch.snehith said:
Hi my phone model SM-A750FN, purchased in Europe and using in India and volte not working , only jiovoice call app working . With this app I can't access bank apps due auto verification failure ... I checked the CSC available list and I didn't found Indian CSC .... Please help me what to do
Click to expand...
Click to collapse
some changes and instructions need to work this fix
After changing that your file worked for me
ch.snehith said:
some changes and instructions need to work this fix
After changing that your file worked for me
Click to expand...
Click to collapse
i have the model SM-A750F/DS bought from dubai.. same issues ..cant access banking apps through jio call app..plz help bro
OK ..finally i have got volte working..its not a big deal at all..self experimnet is everything.
follow the steps
1. goto updato.com search for the firmware SM-A750F and refine the search for India (INS) and the android version 9
2.get the latest firmware and download it.
3.need odin version Odin3_v3.13.1 or above to flash it.
4.enable oem unlock and usb debuggin in developer option.
5.extract the firmware with 7zip, run odin as administartor and
select AP>AP, BL>BL , CP>CP, and important CSC>shud select CSC and not HOME CSC.
put your mobile on download mode flash the firmware.reboot will take a while be patient.
and VoLte wil be there..
The firmware does not contain carrier files for China and Korea carriers.
I made a magisk module that installs these carrier files systemlessly.
I don't live in China or Korea so I have no way to test this.
If you're living in China or Korea, please help me test the module to see if it works.
Thanks.
Hi swangjang, thank you for sharing your module! I used QPST to replace the modified xml files to enable 5G, and now I installed your module. The 5G runs well, but I can't tell if it is enabled by your module.
For VoLTE, the switcher appeared in the option, but it dosen't work. When I made a phone call, the network drop to 3G. (My carrier is China unicom)
q.snake said:
Hi swangjang, thank you for sharing your module! I used QPST to replace the modified xml files to enable 5G, and now I installed your module. The 5G runs well, but I can't tell if it is enabled by your module.
For VoLTE, the switcher appeared in the option, but it dosen't work. When I made a phone call, the network drop to 3G. (My carrier is China unicom)
Click to expand...
Click to collapse
Thank you for testing.
I think due to dm-verity, the module files don't actually get placed in the system. I'll need to wait until we get TWRP to disable verity.
Can you try and change sim cards to force the phone to reload the mbn file?
swangjang said:
Thank you for testing.
I think due to dm-verity, the module files don't actually get placed in the system. I'll need to wait until we get TWRP to disable verity.
Can you try and change sim cards to force the phone to reload the mbn file?
Click to expand...
Click to collapse
I'll test it later.
q.snake said:
I'll test it later.
Click to expand...
Click to collapse
Tbh, I don't think it will work.
I plan to install a custom rom (custom roms don't have dm-verity) in the weekend and see if the module works on there. As long as dm-verity is enabled, I don't think any /system modifcation by magisk will work.
swangjang said:
The firmware does not contain carrier files for China and Korea carriers.
I made a magisk module that installs these carrier files systemlessly.
I don't live in China or Korea so I have no way to test this.
If you're living in China or Korea, please help me test the module to see if it works.
Thanks.
Click to expand...
Click to collapse
Hi, I live in south korea and I have UK version of Pixel 5(GTT9Q).
I'll try this module tonight and see if it works.
May I ask you where did you get mbn files for korean carrier? In my experience, KT and LGU need some efs modification especially for google pixel series, so directly injecting mbn from other device won't work well.
cdexswzaq said:
Hi, I live in south korea and I have UK version of Pixel 5(GTT9Q).
I'll try this module tonight and see if it works.
May I ask you where did you get mbn files for korean carrier? In my experience, KT and LGU need some efs modification especially for google pixel series, so directly injecting mbn from other device won't work well.
Click to expand...
Click to collapse
That attached module is very outdated. Please download from here:
GitHub - swangjang/Pixel-Redbull-Carrier-Patch: This is a Magisk module (in testing) for Pixel 4a (5G) and Pixel 5 that enables 5G for Unlisted Countries, VoLTE switches in the settings and add support for more countries/carriers.
This is a Magisk module (in testing) for Pixel 4a (5G) and Pixel 5 that enables 5G for Unlisted Countries, VoLTE switches in the settings and add support for more countries/carriers. - GitHub - swa...
github.com
I got the mbn files from Xiaomi Redmi K30. The K30 uses the same chipset as Pixel 5.
Just tested module in south korea, but it doesn't works.
It seems that magisk module is doing it's job. I run root explorer and confirmed that mbm_sw.txt and other additonal korea and china mbn successfully loaded.
But when I run efs explorer, Banner shows "SW_DEFAULT" instead of "LGU".
Maybe Pixel 5 can't load LGU mbn because of some other reason.
cdexswzaq said:
Just tested module in south korea, but it doesn't works.
It seems that magisk module is doing it's job. I run root explorer and confirmed that mbm_sw.txt and other additonal korea and china mbn successfully loaded.
But when I run efs explorer, Banner shows "SW_DEFAULT" instead of "LGU".
Maybe Pixel 5 can't load LGU mbn because of some other reason.
Click to expand...
Click to collapse
Thank you for testing. Did you install the A or B? could you try the other one as well to see if it works? Please make sure to uninstall first.
Also maybe take out sim card and insert again?
swangjang said:
Thank you for testing. Did you install the A or B? could you try the other one as well to see if it works? Please make sure to uninstall first.
Also maybe take out sim card and insert again?
Click to expand...
Click to collapse
I used A. and took out & changed sim card several times.
I'll check B tonight.
cdexswzaq said:
I used A. and took out & changed sim card several times.
I'll check B tonight.
Click to expand...
Click to collapse
I read on a Korean forum that you may need to visit your carrier customer centre to register your device
???ۺ????丮 [??????, ???÷???, ????? ?ؿ??? Ŀ?´?Ƽ] : ???̹? ī??
cafe.naver.com
Under section 3. part (4), "VoLTE calls can be made only by registering OMD (Open Model Device) as a VoLTE capable model name with each mobile operator".
Also, after installing the module, maybe reboot the device once?
swangjang said:
Thank you for testing.
I think due to dm-verity, the module files don't actually get placed in the system. I'll need to wait until we get TWRP to disable verity.
Can you try and change sim cards to force the phone to reload the mbn file?
Click to expand...
Click to collapse
Hi, I changed the SIM card of another carrier but the 5G is still enabled, even after I installed magisk completely and restore the original files with QPST, the 5G is still there...
I doubt that the new firewares (Feb and Mar updates) canceled the carrier limitation for 5G.
cdexswzaq said:
I used A. and took out & changed sim card several times.
I'll check B tonight.
Click to expand...
Click to collapse
Hi, I made more variations of the module using different mbn files for Korean carriers. Could you please them one at a time. It would be greatly appreciated.
I tried this with korean LGU, SKT simcard, but efs explorer shows SW_DEFAULT or Wildcard banner randomly.
I did sim tray out and in several times, and did WI-FI, Mobile Bluetooth reset on android settings-system menu.
And I also tried Taiwanese Chunghwa Telecom sim card which i got during taiwan travel, (Chunghwa Telecom is one of supported carrier for pixel 5) And It reports CHT banner correctly.
I don't know why, but it seems that pixel 5 refuses to load korean mbns for some reason.
cdexswzaq said:
I tried this with korean LGU, SKT simcard, but efs explorer shows SW_DEFAULT or Wildcard banner randomly.
I did sim tray out and in several times, and did WI-FI, Mobile Bluetooth reset on android settings-system menu.
And I also tried Taiwanese Chunghwa Telecom sim card which i got during taiwan travel, (Chunghwa Telecom is one of supported carrier for pixel 5) And It reports CHT banner correctly.
I don't know why, but it seems that pixel 5 refuses to load korean mbns for some reason.
Click to expand...
Click to collapse
Thank you.
So "pr-red", "nokia" and "mi9t" all not working for korean sim?
swangjang said:
Thank you.
So "pr-red", "nokia" and "mi9t" all not working for korean sim?
Click to expand...
Click to collapse
Yes, I tried all of 6 mbns, but no luck. All recognized as SW_DEFAULT or Wildcard banner.
I'm trying to figure out why only pixel rejects those mbns. Maybe there's some hidden policy to reject unsupported country's sim?
cdexswzaq said:
Yes, I tried all of 6 mbns, but no luck. All recognized as SW_DEFAULT or Wildcard banner.
I'm trying to figure out why only pixel rejects those mbns. Maybe there's some hidden policy to reject unsupported country's sim?
Click to expand...
Click to collapse
I don't think there would be something that will reject it. Other people reported they got VoLTE working for their 'unofficial' carrier.
Hi,
I need help enabling the VoLTE and VoWifi on my Xperia 5 III (XQ-BQ72 TW variant). So far, I have seen too many threads online and none of it seem to be working:
1. Flash different Region's firmware (tried 9 different regions from XperiFirm) but none work in enabling VoLTE
2. Try putting the sim into a different phone that has VoLTE working in my country (India), enabled VoLTE there, placed a call and then put it back in Xperia. Does Not work either! (Lame)
After trying so much flashing, I am coming to an end where I am about to give up my hopes that VoLTE will ever work in my device in India. I see a few members on XDA that either have a 1 III or 5 III with working VoLTE on different carriers but I don't know how they made it work for them. I am seeking some expertise here and hoping someone can help me enable this on my phone so that this doesn't become a paperweight for me. Appreciate any help/guidance in advance.
Can carrier you using not support VoLTE for Xperia 5 III,
I checked firmware off BQ72, but I not see firmware for India Market
Yes, coz Sony has officially left this market years ago, but there are many phones of their 1 and 5 series that do support VoLTE for Indian carriers. Not sure how those users end up with VoLTE (probably through upgrading their modem firmware or something). I need some help in enabling VoLTE somehow as I am reading it is doable but I am just not aware how I can for Jio.
I was able to download Xiaomi 11T Pro (as both these phones have 888) and extracted 2 .mbn files (one of Reliance and other of Airtel). Anyone who can try to add these to the Sony's .sin modem files as I do not have the expertise. That way we can try to flash this to our phone and see if it works. @htcmage is that something you are an expert with? I read many of your forum articles but was unclear on many things on how I can enable this on my xperia 5 III. I am seeking help from experts so that we can also have VoLTE in our region and would appreciate anyone's help with this.
Not sure if these files help. (Kindly rename the extension from .zip to .mbn)
Please replace these OEM files to your firmware which you want to flash to your mobile
yogeshpatel7 said:
Please replace these OEM files to your firmware which you want to flash to your mobile
Click to expand...
Click to collapse
Is there any rom for xz2 for jio volte
Dikshantboora said:
Is there any rom for xz2 for jio volte
Click to expand...
Click to collapse
Flash Indian firmware and enable volte n wifi calling but for that your xz2 was global version phone Japanese carrier i am not tried I have xz2 n I have both volte n wifi calling working smoothly
Where to get Indian firmware ..mine is h 8216 do u have any link ..please help brother
Dikshantboora said:
Where to get Indian firmware ..mine is h 8216 do u have any link ..please help brother
Click to expand...
Click to collapse
Try H8296 - India (Customized IN) rom from XperiFirm. That could help.
Anyone want help to get volte on xperia device I can help koz I hate paid services
Samir solanki said:
Anyone want help to get volte on xperia device I can help koz I hate paid services
Click to expand...
Click to collapse
I'd be surprised if someone needs to pay here since this is a community forum and people help out of their kindness in general here.
Would love to know the steps to enable this on my Xperia 5 III if you know how to. Please do share and enlighten us.
If anyone is still looking for enabling Jio on their 5 III, here is the complete guide that can help you to get this enabled. Make sure to download the Jio mbn file (mcfg_sw_reliance.zip) from my previous messages and use it when following this guide:
Getting VoLTE and VoWiFi on unlisted carriers by flashing mbn file
I live in Canada and I have a BC72 (Asian version). I am struggling to get VoLTE and VoWiFi working. I know that mbn file is the key to getting IMS support and sony seems to block some carrier mbn files (only mbn in sales areas are available). So...
forum.xda-developers.com
Kudos to @Forbesii for the amazing work!
Hello All,
Below steps worked for me, Jio VoLTE & VoWiFi is working fine on both the slots on Sony Xperia 5 iii (XQ-BQ72)
1)Root your xperia 5 iii using below thread
[CLOSED] Deleted
Here was a Guide. Someone said people don't care about Me or My Work so...
forum.xda-developers.com
2)install magisk
3)connect you mobile in adb shell
#adb devices
#adb shell
#su (grant root privilege to adb shell in magisk )
#setprop persist.dbg.ims_volte_enable 1; setprop persist.dbg.volte_avail_ovr 1; setprop persist.dbg.vt_avail_ovr 1; setprop persist.dbg.wfc_avail_ovr 1
Now uninstall magisk from inside the app...all the banking apps also working
thats all just reboot ...it will be enabled.
RKONLINE said:
Hello All,
Below steps worked for me, Jio VoLTE & VoWiFi is working fine on both the slots on Sony Xperia 5 iii (XQ-BQ72)
1)Root your xperia 5 iii using below thread
[CLOSED] Deleted
Here was a Guide. Someone said people don't care about Me or My Work so...
forum.xda-developers.com
2)install magisk
3)connect you mobile in adb shell
#adb devices
#adb shell
#su (grant root privilege to adb shell in magisk )
#setprop persist.dbg.ims_volte_enable 1; setprop persist.dbg.volte_avail_ovr 1; setprop persist.dbg.vt_avail_ovr 1; setprop persist.dbg.wfc_avail_ovr 1
Now uninstall magisk from inside the app...all the banking apps also working
thats all just reboot ...it will be enabled.
Click to expand...
Click to collapse
Thanks for sharing @RKONLINE. Did you manage to get Airtel working in either of the slots. I am yet to find an MBN that not only makes Airtel work on both the SIMs but also retain Jio's VoLTE and VoWifi after that. Please let me know. Thanks!
I am stuck at sin / unsin step and not able to follow steps . Checking whether VI network works with Xperia 5 iii , if so I will move to VI .Else looks like BSNL supports 3G still
@anmolkakkar Will be very helpful if can post simpler steps help me through a remote session (I am not very familiar with modding etc)
RKONLINE said:
Hello All,
Below steps worked for me, Jio VoLTE & VoWiFi is working fine on both the slots on Sony Xperia 5 iii (XQ-BQ72)
1)Root your xperia 5 iii using below thread
[CLOSED] Deleted
Here was a Guide. Someone said people don't care about Me or My Work so...
forum.xda-developers.com
2)install magisk
3)connect you mobile in adb shell
#adb devices
#adb shell
#su (grant root privilege to adb shell in magisk )
#setprop persist.dbg.ims_volte_enable 1; setprop persist.dbg.volte_avail_ovr 1; setprop persist.dbg.vt_avail_ovr 1; setprop persist.dbg.wfc_avail_ovr 1
Now uninstall magisk from inside the app...all the banking apps also working
thats all just reboot ...it will be enabled.
Click to expand...
Click to collapse
You are an absolute legend thank you so much. For me on my XQ-BC72 Xperia 1 III this worked and has unlocked VOLTE for my UK networks - didn't have to faff around with MBN files and whatnot. Thank you so, so much!
I have a different rom from ones in xperifirm. I am trying to flash rom from Xperifirm and unable to build FTF Rom file using sony mobile flasher since it does not have device support.
Can anyone suggest steps
anmolkakkar said:
Thanks for sharing @RKONLINE. Did you manage to get Airtel working in either of the slots. I am yet to find an MBN that not only makes Airtel work on both the SIMs but also retain Jio's VoLTE and VoWifi after that. Please let me know. Thanks!
Click to expand...
Click to collapse
No I haven't tested yet, will post here once I tested
myarnav said:
I have a different rom from ones in xperifirm. I am trying to flash rom from Xperifirm and unable to build FTF Rom file using sony mobile flasher since it does not have device support.
Can anyone suggest steps
Click to expand...
Click to collapse
Which model do you have and which firmware are you trying to install? Additionally, which mobile network are you on for which you need the VoLTE / VoWifi to work?
anmolkakkar said:
Which model do you have and which firmware are you trying to install? Additionally, which mobile network are you on for which you need the VoLTE / VoWifi to work?
Click to expand...
Click to collapse
Thanks for enquiring. I have XQ-BQ62 dev phone without drm where I installed ROM from Xperifirm.
I am on Airtel and the phone disconnects from 4G and calls using 2G network of Airtel. In the process several time there are call drops.
When I try to patch SIN using Magisk, I am getting below error
- Device platform: arm64-v8a
- Installing: 25.2 (25200)
- Processing tar file
-- Copying: boot.cms
-- Copying: boot.000
! No boot image found
! Process error
! Installation failed
Click to expand...
Click to collapse