I would like to clarify some things first.
I know I fuked up big time, I did things I didnt know how to do, flashed shlt from strange links and the like, I completely assume the responsibility, I fuked up big time and its my fault. Im a stubborn mf and decided to take care of my device without much knowledge.
I apologize beforehand if the answer to this is already somewhere, but i am so so tired im writing this thread and going to sleep, hoping to find an answer tomorrow or at least discuss with you people a solution to the situation I created.
In the span of 24 hours I completely messed up my phone. Its a honor6x, bll-l22 model. It had huawei Nougat on it which i installed months ago, working and smooth. I wanted to upgrade to Android Pie or Oreo at least, and messed it up. I would try to recall and tell you what happened first but I swear i downloaded so many files and roms i cant order it in my head.
I flashed twrp with fastboot, and from twrp i flashed one of those roms. Phone died probably because of incompatible OS. I tried fixing it with DC phonenix but to no avail, phone stil bricked.
Its on a bootloop, huawei logo keeps appearing and dissapearing again and again. When i hold vol up + power it goes to a blank rescue mode screen, please update system again, and also says failed to load recovery. vol up vol down and power doesnt take me to upgrade mode anymore (which is why i cant finish the flashing with dc phoenix, since it asks for you to put your huawei in upgrade mode to finish the firmware install) and the only accessible mode is fastboot (vol down + power) which gives me certain hope to save my device from a hard brick.
i tried flashing a stock marshmallow firmware for my phone model (the extracted .img files of recovery, boot, cust, and system) through fastboot but it says that remote command is not allowed. the only thing i can flash is recovery, so i installed the stock one to see if i get any options to wip/restore/update from sd card/anything but it all failed. i got the twrp for honor6x (berlin) and after flashing and booting directly to recovery, it fails and boots into stock recovery/fails to load recovery and shows the rescue mode i talked to you about in the beginning.
i just tried flashing stock recovery, it says flash okay and when i boot into it, it takes me to rescue mode now, doesnt even boot the stock recovery anymore.
i just checked and its in a loop between rescue mode and boot logo, one comes after the other endlessly.
ive been all day searching for a fix, ive spent 18 hours in front of the pc with breaks for taking a shlt, pissing or eating something, which for me is a lot, im not used to it. so im gonna post this here and sleep a lot and come back tomorrow, i cant stand this screen for one more seconds my eyes are burning.
thank you in advance, i appreciate any help :good:
Can you try reflashing TWRP? Or boot into TWRP? Also, what is the phone status in the bootloader screen. Does it say locked or unlocked? Assuming you can flash and boot into TWRP I would say go to wipe -> format data and then advanced wipe -> mark everything except sd card and wipe it. If not then I recommend dirty flash of your ROM you were using before boot loop i.e latest version of Android 7 for your model through hurupdater. You can find more info about it by searching for it. If the flash is successful boot into the ROM. I think your problem is mostly die to corrupt partitions and hurupdater should fix that. Also download the firmware files from Firmware Finder and rename them accordingly. If you are able to boot into the ROM, then reflashing TWRP and then wipe everything again (except SD Card) and then reflashing the same ROM using hurupdater again. This will remove the dirty flash.
Another alternative u could try is HWOTA 7. It will also upgrade you to Android 8 if you provide the correct files. Just search HWOTA 7 for Honor 6x. And follow the steps. Hope this helps your case
---------- Post added at 10:29 AM ---------- Previous post was at 10:26 AM ----------
https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601/page14
Here is the HWOTA 7 thread. If hurupdater fails try this
---------- Post added at 10:31 AM ---------- Previous post was at 10:29 AM ----------
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Here is the link to hurupdater. It works on Honor 6x. Couldn't find the particular thread. Download the Hurupdater zip and official firmware from Firmware Finder and follow the instructions.
Mannan Qamar said:
Can you try reflashing TWRP? Or boot into TWRP? Also, what is the phone status in the bootloader screen. Does it say locked or unlocked? Assuming you can flash and boot into TWRP I would say go to wipe -> format data and then advanced wipe -> mark everything except sd card and wipe it. If not then I recommend dirty flash of your ROM you were using before boot loop i.e latest version of Android 7 for your model through hurupdater. You can find more info about it by searching for it. If the flash is successful boot into the ROM. I think your problem is mostly die to corrupt partitions and hurupdater should fix that. Also download the firmware files from Firmware Finder and rename them accordingly. If you are able to boot into the ROM, then reflashing TWRP and then wipe everything again (except SD Card) and then reflashing the same ROM using hurupdater again. This will remove the dirty flash.
Another alternative u could try is HWOTA 7. It will also upgrade you to Android 8 if you provide the correct files. Just search HWOTA 7 for Honor 6x. And follow the steps. Hope this helps your case
---------- Post added at 10:29 AM ---------- Previous post was at 10:26 AM ----------
https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601/page14
Here is the HWOTA 7 thread. If hurupdater fails try this
---------- Post added at 10:31 AM ---------- Previous post was at 10:29 AM ----------
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Here is the link to hurupdater. It works on Honor 6x. Couldn't find the particular thread. Download the Hurupdater zip and official firmware from Firmware Finder and follow the instructions.
Click to expand...
Click to collapse
Hey man! Thanks for your long answer, just got up with a fresh head and stronger hopes so I will keep trying it all. I couldnt boot into twrp dik why. I flash it succesfully with fastboot but after that it boots me into recovery/fails and blank rescue mode screen. I by some miracle button combination achieved to boot straight into twrp right after flashing, so I will try that.
Bootloader is unlocked (phone unlocked) and FRP says "unlock". idk if that is a statement or a command to do it actually haha.
As soon as I boot into twrp, ill wipe it all and follow your instructions
Ill try to use twrp first, then hurupdater and then hwota7.
What do you mean by renaming the firmware accordingly? How can I do that? Isnt that iirelevant since inside the firmware files it still says some things that do not match the title i renamed?
oh, forgot something. fastboot commands are limited. i can flash a recovery.img but not a boot.img or use certain commands. remote command not allowed.
inkainsa said:
Hey man! Thanks for your long answer, just got up with a fresh head and stronger hopes so I will keep trying it all. I couldnt boot into twrp dik why. I flash it succesfully with fastboot but after that it boots me into recovery/fails and blank rescue mode screen. I by some miracle button combination achieved to boot straight into twrp right after flashing, so I will try that.
Bootloader is unlocked (phone unlocked) and FRP says "unlock". idk if that is a statement or a command to do it actually haha.
As soon as I boot into twrp, ill wipe it all and follow your instructions
Ill try to use twrp first, then hurupdater and then hwota7.
What do you mean by renaming the firmware accordingly? How can I do that? Isnt that iirelevant since inside the firmware files it still says some things that do not match the title i renamed?
oh, forgot something. fastboot commands are limited. i can flash a recovery.img but not a boot.img or use certain commands. remote command not allowed.
Click to expand...
Click to collapse
Renaming them means that when you download them from Firmware Finder they will be named different. You just rename them normally. The linked threads will provide you detailed info. Just rename them accordingly and you are good to go. Good Luck.
BTW don't be so hard on yourself. We all make mistakes. Just because you flashed something incompatible doesn't mean you deserve hate. You are a noob. The first time I bricked my phone was when I flashed a zip that was supposed to redesign the settings menu of Android 7 to resemble Android 8. LoL. So don't be hard on yourself. If the phone boots it can be saved.
The combination is power and volume +. Also don't try everything. If the wipes are successful, then just flash hurupdater and you are good to go. If they are unsuccessful then format data first and try again. Format data option is in the same menu
Mannan Qamar said:
Renaming them means that when you download them from Firmware Finder they will be named different. You just rename them normally. The linked threads will provide you detailed info. Just rename them accordingly and you are good to go. Good Luck.
BTW don't be so hard on yourself. We all make mistakes. Just because you flashed something incompatible doesn't mean you deserve hate. You are a noob. The first time I bricked my phone was when I flashed a zip that was supposed to redesign the settings menu of Android 7 to resemble Android 8. LoL. So don't be hard on yourself. If the phone boots it can be saved.
The combination is power and volume +. Also don't try everything. If the wipes are successful, then just flash hurupdater and you are good to go. If they are unsuccessful then format data first and try again. Format data option is in the same menu
Click to expand...
Click to collapse
Haha of course i dont deserve hate, but i was really stubborn, thats it.
Yeah, cant boot into any recovery at all, so hurupdate is impossible.
Also, Im getting lost on all the hwota threads, unfamiliar concepts and stuff i miss so i will posibly do something wrong.
Could you reply with noob-friendly steps on how to install oreo on my device? And if thats not possible ill be satisfied with nougat or even marshmallow, as long as phone works :/. Of course i prefer oreo if possible.
No recovery, when i flash one (stock or twrp) through fastboot, it flashes succesfully but phone doesnt boot into it (yes with vol+ and power), it just goes straight to rescue mode blank screen. Upgrade mode is failing too. Only fastboot works.
inkainsa said:
Haha of course i dont deserve hate, but i was really stubborn, thats it.
Yeah, cant boot into any recovery at all, so hurupdate is impossible.
Also, Im getting lost on all the hwota threads, unfamiliar concepts and stuff i miss so i will posibly do something wrong.
Could you reply with noob-friendly steps on how to install oreo on my device? And if thats not possible ill be satisfied with nougat or even marshmallow, as long as phone works :/. Of course i prefer oreo if possible.
No recovery, when i flash one (stock or twrp) through fastboot, it flashes succesfully but phone doesnt boot into it (yes with vol+ and power), it just goes straight to rescue mode blank screen. Upgrade mode is failing too. Only fastboot works.
Click to expand...
Click to collapse
So you can't enter TWRP? I would recommend that later you flash TWRP through fastboot instead of rebooting press and hold volume up & power button on the bootloader screen. If that doesn't work try flashing TWRP with the following command:
"Fastboot flash recovery_ramdisk (nameofrecovery.img)" . Also HWOTA 7 requires TWRP to be functional. If by any chance you can enter TWRP then make the wipes. Don't wait for anything. Have the Hurupdater files in a SD card along with the firmware.
See myself in the story too LOL. Still can not remember how I got out.....
Try to flash twrp
then run: adb reboot recovery
To fash recovery run:
in Nougat: fastboot flash recovery xxxtwrp.img
in Oreo: fastboot flash recovery_ramdisk xxx.twrp.img
Maybe run both and see what u get.
my phone is hard bricked. it wont even boot to fastboot ot bootloader. three button not working. any help. it just keeps diplaying your phone is now booting. i dont even get three options. please any help would be appreciated
Eww bud is the battery dead? Maybe try to reflash your recoveries
mightyblazer said:
Eww bud is the battery dead? Maybe try to reflash your recoveries
Click to expand...
Click to collapse
even after tye batteries died i am unable to boot into fastboot........
Oh ya hmm not sure about that sorry
Mannan Qamar said:
my phone is hard bricked. it wont even boot to fastboot ot bootloader. three button not working. any help. it just keeps diplaying your phone is now booting. i dont even get three options. please any help would be appreciated
Click to expand...
Click to collapse
Same thing happened to me... any progress?
mangesh2000 said:
Same thing happened to me... any progress?
Click to expand...
Click to collapse
Fixed a few months ago,used it for a while and then sold it.
Related
My moto G3 is stuck on the "warning, bootloader unlocked" page, please help !
I recently rooted my Motorola Moto G3 and it worked.... ish, when I opened my phone from it being turned off I was greeted with the message telling me that it was super duper dangerous to root your phone and I could damage my phone, that normally goes as it is just a mandatory thing that they have to say, I waited for a while and it didn't go, I waited for a day and it didn't go. So I let it run out of charge and tried to boot it again, this didn't work, I was still seeing the same white screen with red and black writing. I then let it run out of charge and open it in fast boot mode by pressing the power button and volume down, this did work and from there I have managed to open the team win recovery project but whenever I do anything from then, it will go back to the error page and then will never load. I have even reset the phone to factory settings. If I hold the power button it will turn off the phone but very shortly after automatically turn itself back on to this same image.... please help!
How did you end up rooting it? Have you tried flashing a factory image?
If I were you, I would try to reflash stock firmware with factory reset
@Artyb52
hi, what did you do to Root ??
check these , if you have done evrything :
1) USB debugging enabled, allow OEM unlocking Enable ( developer options )
2) install ADB and fastboot. ( in PC)
3) Unlock bootloader in Fastboot mode .. (After unlocking did you PowerOn your phone, and check ? did it ON with out any problems? )
4) Installing a recovery , by following proper commands and choosing right version ..
5) flashing SuperSU with that Recovery.
If you have done everything Right, then Do onething.. Change CustomRecovery Version ( if on TWRP ) ,
else Goto Fastboot.. press POWER OFF, so that your phone gets SHUT DOWN, then On it normally ..
i have seen a problem where REBOOT function causes Bootloops..
i tried that and it didnt work :/
@nandakis4 shame it didn't work. Do you have any other tips, I would be really grateful
@Acetyloaceton how do you do that ? sorry for sounding like such a noob, i'm new to the game
l3ones said:
How did you end up rooting it? Have you tried flashing a factory image?
Click to expand...
Click to collapse
@13ones I tried flashing the TWRP image, is that different to the factory image ?
The same thing happened me when I rooted my phone. To fix it I downloaded cm 13 then placed it on internal storage and flashed it (and gapps) from twrp and it worked fine.
Acetyloaceton said:
If I were you, I would try to reflash stock firmware with factory reset
Click to expand...
Click to collapse
"Factory Reset" Doesn't reflash stock firmware, it just wipes /data /cache and internal storage.
---------- Post added at 10:20 PM ---------- Previous post was at 10:19 PM ----------
Artyb52 said:
@13ones I tried flashing the TWRP image, is that different to the factory image ?
Click to expand...
Click to collapse
Yes, you'd need to download it from the stock firmware page and flash the whole thing through fastboot.
l3ones said:
"Factory Reset" Doesn't reflash stock firmware, it just wipes /data /cache and internal storage.
---------- Post added at 10:20 PM ---------- Previous post was at 10:19 PM ----------
Yes, you'd need to download it from the stock firmware page and flash the whole thing through fastboot.
Click to expand...
Click to collapse
@l3ones i have tried this 2 times now, and i must be doing something wrong, i dont want to hassle you but could you walk me through the exact procedure needed to do this
Try this
Using adb sideload on twrp
1. Flash supersu 2.62, then
2. Flash supersu 2.65
Command : adb sideload supersu.xx.zip
In my case, it works.
Artyb52 said:
@l3ones i have tried this 2 times now, and i must be doing something wrong, i dont want to hassle you but could you walk me through the exact procedure needed to do this
Click to expand...
Click to collapse
If I'm not too late, sure. What model do you have?
Hey folks,
I've tried a few tipps others gave me here on xda, but nothing could fix my problem.
My situation looks like this:
I've been playing around w/ some TWRP versions and Custom ROMs,
and out of sudden my phone got soft bricked (stuck at the »Your phone is unlocked and can't be trusted« screen).
I was able to bring it back to life, via the Italian Knife and official stock ROM.
So, now I'm back at stock (NXT-L29C432B320) but my bootloader is still unlocked.
And it doesn't matter which TWRP version I flash, my phone won't boot into recovery,
so I'm not able to flash a Custom ROM.
If I try to enter the recovery mode it get stuck on »Your phone is booting now...« ... doesn't matter how long I wait, it won't boot.
If I flash a stock recovery, I can enter the Huawei eRecovery, but that doesn't help much.
Someone told me I have to lock my bootloader again to start the whole unlock / root stuff from scratch,
but if I try to lock it via fastboot it always fails w/ the »command not allowed« message.
The developer options & USB Debugging options are enabled and the Enable OEM unlock option, too.
Is there anything I can do or am I screwed?!
Btw, dload is not possible, 'cause the phone freezes if I try to do it from the dialer menu
and if I try to do it via the button combo, the phone just enters the Huawei eRecovery.
Read threads in general section and you can restore easily
bluheart said:
Read threads in general section and you can restore easily
Click to expand...
Click to collapse
I did. That's why I created a new thread, 'cause nothing I found there solved my problem.
if you can give me an advice I would be really happy.
Do a dload of your region firmware
This should solve your problem
Put Update.app on SD card in dload directory.... use the latest firmware for your phone region or last used stock firmware.
Install SD card.
Power off.
3 button startup will install firmware on your phone and your phone will be stock and locked.
If you get :not compatible story you must adb and fastboot cust files using @somboons tools.
i had read your problems
it same as my problem so i flash with Decrypted & Insecure boot.img with adb fix via adb truely version 320or ver.......
links :http://forum.xda-developers.com/mate-8/orig-development/kernel-insecure-boot-img-t3311306
after thats reboot if can not reboot must dload agains
wishing can help you
goodluck
Hi, need some urgent help here.
I was trying to install a custom rom, so I unlocked first the bootloader, then flashed twrp 3.0.2 for Android 5.1 and with it I flashed KangVip rom (porto from honor 6).
Problem was it didn't boot, just black screen.
So I supposed the problem was with the rom so I flashed via fastboot the aosp 6, obviously with same results.
I tried lot of stuff (twrp 2.8.x.x, reinstall stock firmware, restore twrp backup of stock full firmware and so on - I did almost everything I could do) and now I'm with a Huge problem: no huawei logo at start, just a white screen and nothing happen. I have twrp 3.0.2 for 5.1 installed right now but I can't install stock recovery.
Please help me, what do I gotta do?
[emoji30]
the ported rom is based on Android 6.0 you have Android 5.1 youk should flash 5.1 based rom..
it's good to flash stock and update official to b560 or b571 depending on which region to have then flash twrp recovery and then flash desire rom..
fazi2015 said:
the ported rom is based on Android 6.0 you have Android 5.1 youk should flash 5.1 based rom..
it's good to flash stock and update official to b560 or b571 depending on which region to have then flash twrp recovery and then flash desire rom..
Click to expand...
Click to collapse
Thx for this.
But I have a problem, I can't install stock recovery and if I try to flash the .img files extracted from update.app nothing happens.
Also, I still have that problem with huawei logo disappeared and a blank white screen instead.
Sent from my HUAWEI GRA-L09 using Tapatalk
boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....
fazi2015 said:
boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....
Click to expand...
Click to collapse
Solved, thanks!
Sent from my HUAWEI GRA-L09 using Tapatalk
fazi2015 said:
boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....
Click to expand...
Click to collapse
Hope you can help me out here...I had just gotten my HAM7 for a couple of days. Was on 4.4.2 B120, was able to get it up to B326. Just yesterday I attempted to flash up to B331 and it succeeded according to the "local update" option. Then it went on boot loop. I tried doing the force 3-button option and that worked to the point of saying it succeeded and will reboot. Now I'm stuck on Ascend Mate logo. I can no longer get into factory option mode (V+Power), only fastboot mode. Also, I can't do force update no more so I can't try any other "update.app" unless I'm missing something here.
Any help in getting this unit at least back to working condition will be a BIG help. I just received this two days ago.
Thx!!!!
jfer671 said:
Hope you can help me out here...I had just gotten my HAM7 for a couple of days. Was on 4.4.2 B120, was able to get it up to B326. Just yesterday I attempted to flash up to B331 and it succeeded according to the "local update" option. Then it went on boot loop. I tried doing the force 3-button option and that worked to the point of saying it succeeded and will reboot. Now I'm stuck on Ascend Mate logo. I can no longer get into factory option mode (V+Power), only fastboot mode. Also, I can't do force update no more so I can't try any other "update.app" unless I'm missing something here.
Any help in getting this unit at least back to working condition will be a BIG help. I just received this two days ago.
Thx!!!!
Click to expand...
Click to collapse
are you have unlock bootloader or not..
fazi2015 said:
are you have unlock bootloader or not..
Click to expand...
Click to collapse
Yes, bootloader is unlocked. FYI, I can't do Vol+ Power or 3-button force. I have no idea what went wrong after the B331 update.app flash. It said successful then boot loop after. I have looked all over the forums and tried everything from flashing C900B300 rollback to try and get 4.4.2 that I started out with, but I really don't know which firmware to start with. The last update.app files I was using was the European variants. Phone was originally locked to Ecuador MoviStar network at B120SP04, then I flashed up to B324 5.1.1. Rooted and then wanted to upgrade to B331 so I unrooted and flashed. Now I'm stuck.
jfer671 said:
Yes, bootloader is unlocked. FYI, I can't do Vol+ Power or 3-button force. I have no idea what went wrong after the B331 update.app flash. It said successful then boot loop after. I have looked all over the forums and tried everything from flashing C900B300 rollback to try and get 4.4.2 that I started out with, but I really don't know which firmware to start with. The last update.app files I was using was the European variants. Phone was originally locked to Ecuador MoviStar network at B120SP04, then I flashed up to B324 5.1.1. Rooted and then wanted to upgrade to B331 so I unrooted and flashed. Now I'm stuck.
Click to expand...
Click to collapse
now you should flash twrp recovery in fastboot mode and then flash a custom rom like kangvip I'll send you link soon...
fazi2015 said:
now you should flash twrp recovery in fastboot mode and then flash a custom rom like kangvip I'll send you link soon...
Click to expand...
Click to collapse
Thank you very much....hope that will solve the boot issue and bring this unit back to life
Alright, so I've given up complete hope that I can get my unit back up and running again. I've tried so many ways already with no success (fastboot/adb, force upgrade, etc.,), and even tried to copy my second HAM7 images (via sdk tools) and to no avail.
The thing I'm trying to understand is where exactly do I start with trying to revive? When I first got this device from eBay, it was apparently still on "MoviStar" Telefonica-Spain network so my network bars showed "R" for roaming. Somehow, I was able to flash it from being on V100R001C00B120SP04a and upgrade to B127>B145>B324 which made me able to use my own service normally. It worked fine and I was even able to root it. Decided to do a last upgrade to B331 and while the local update option showed it as successfully installed, it went into boot loop ever since. Hence, I used European firmwares for most of the flashing. My second mate was on B145 and I was able to get that to B331, which is running fine right now.
ATM, I am ONLY able to do Volume-/Power to get into fastboot.
Doesn't work:
- V+/Power (stock recovery)
- V-+/Power (3-button force)
What works:
- V-/Power with USB for fastboot
*Bootloader is unlocked, but I do believe that after flashing the last firmware of B331, I may have done a factory wipe, which probably reset the USB debugging option as well. So, I'm sure I'm stuck with a device that just might be flashed on the wrong firmware and is factory reset which prevents me from flashing a custom rom or even the stock rom???
Any last advice I would be so thankful for...still waiting on the link for KangVip rom from (fazi2015)
All the best...
jfer671 said:
Alright, so I've given up complete hope that I can get my unit back up and running again. I've tried so many ways already with no success (fastboot/adb, force upgrade, etc.,), and even tried to copy my second HAM7 images (via sdk tools) and to no avail.
The thing I'm trying to understand is where exactly do I start with trying to revive? When I first got this device from eBay, it was apparently still on "MoviStar" Telefonica-Spain network so my network bars showed "R" for roaming. Somehow, I was able to flash it from being on V100R001C00B120SP04a and upgrade to B127>B145>B324 which made me able to use my own service normally. It worked fine and I was even able to root it. Decided to do a last upgrade to B331 and while the local update option showed it as successfully installed, it went into boot loop ever since. Hence, I used European firmwares for most of the flashing. My second mate was on B145 and I was able to get that to B331, which is running fine right now.
ATM, I am ONLY able to do Volume-/Power to get into fastboot.
Doesn't work:
- V+/Power (stock recovery)
- V-+/Power (3-button force)
What works:
- V-/Power with USB for fastboot
*Bootloader is unlocked, but I do believe that after flashing the last firmware of B331, I may have done a factory wipe, which probably reset the USB debugging option as well. So, I'm sure I'm stuck with a device that just might be flashed on the wrong firmware and is factory reset which prevents me from flashing a custom rom or even the stock rom???
Any last advice I would be so thankful for...still waiting on the link for KangVip rom from (fazi2015)
All the best...
Click to expand...
Click to collapse
https://mega.co.nz/#!3N4RzbJY!saB4NY...Ao5goVNiSXAjEc
I am not 100% sure about this rom but you can try it in fastboot you should flash twrp recovery first..
fazi2015 said:
https://mega.co.nz/#!3N4RzbJY!saB4NY...Ao5goVNiSXAjEc
I am not 100% sure about this rom but you can try it in fastboot you should flash twrp recovery first..
Click to expand...
Click to collapse
Unfortunately, it says the file is no longer available
jfer671 said:
Unfortunately, it says the file is no longer available
Click to expand...
Click to collapse
try this all information is here
https://forum.xda-developers.com/mate-7/orig-development/rom-kangvip-rom-mate7-emui3-1-b351-t3228597
fazi2015 said:
try this all information is here
https://forum.xda-developers.com/mate-7/orig-development/rom-kangvip-rom-mate7-emui3-1-b351-t3228597
Click to expand...
Click to collapse
Okay, so final result is I'm stuck on a frozen logo now. The twrp bat file again showed success in flashing and rebooted the device, but I'm hung on the "Huawei Ascend" logo. I have to pull the battery to shut it off, otherwise it stays on. So I'm now sure that it's a hard bricked device since I did the stupid thing of factory resetting which probably reset the usb debug...making it almost impossible to flash any firmware now.
Thanks for the help anyways...I really appreciate it. Gonna throw this up on eBay and see if anyone wants it for parts
jfer671 said:
Okay, so final result is I'm stuck on a frozen logo now. The twrp bat file again showed success in flashing and rebooted the device, but I'm hung on the "Huawei Ascend" logo. I have to pull the battery to shut it off, otherwise it stays on. So I'm now sure that it's a hard bricked device since I did the stupid thing of factory resetting which probably reset the usb debug...making it almost impossible to flash any firmware now.
Thanks for the help anyways...I really appreciate it. Gonna throw this up on eBay and see if anyone wants it for parts
Click to expand...
Click to collapse
I know it's annoying but last time I research more and guide you I was have same problem don't give up....
I send you recovery flash in fastboot no need of usb debugging usb debugging need for adb not for fastboot in fastboot flash recovery by your self download it
https://mega.co.nz/#!GRw0CZjQ!iZllDkA6yJeWk7iEA4vEVA94r2nM_YjAuiS8B9IZdm0
then extract the zip go to resource and hold shift and left click then select open command port here then power off device completely boot into fastboot (bootloader) connect the device to pc and in command port type
fastboot flash recovery twrp_2_7.img
after that type
fastboot reboot and hold the volume- button of device it'll boot into recovery if you success then reply..
I've noticed two things when flashing KK or LP. On KK, the phone does a constant boot loop with Huawei logo (on off on off), but on LP the Huawei logo hangs...it doesn't boot loop. Is this an indication or just a fault with both OS?
So i tried to install the xiaomi.eu rom on my MiMix 2s but something went terribly wrong. First of all i got Twrp to work and installed the rom. After pressing reboot though the phone just rebooted into fastboot. Now i cant get back into Twrp neither can i reboot to the System. Everything just gets me back to fastboot.
When i try to get back into the recovery, after typing "fastboot boot 'recovery' " i get an Error: "FAILED (remote: Failed to load/authenticate boot image: 00000050)"
I also tried to get the global rom back with the MiFlash tool but it seems the fastboot rom download page is currently down.
Any help would be greatly appreciated.
Try to flash the recovery instead of just booting it(I don't get why people are always only booting in recovery, so useless) did you format everything before flashing xiaomi.eu rom?
Flatric said:
Try to flash the recovery instead of just booting it(I don't get why people are always only booting in recovery, so useless) did you format everything before flashing xiaomi.eu rom?
Click to expand...
Click to collapse
I am doing that first but in the guide in this Forum it tells you to boot the recovery. Also "fastboot reboot recovery" does not work(fastboot: usage: unknown reboot target recovery) and i dont know any other way to get into the recovery on that phone.
neeboq said:
I am doing that first but in the guide in this Forum it tells you to boot the recovery. Also "fastboot reboot recovery" does not work(fastboot: usage: unknown reboot target recovery) and i dont know any other way to get into the recovery on that phone.
Click to expand...
Click to collapse
Just type fastboot flash recovery [name_of_recovery.img].img (place the recovery.img in the correct folder on your computer of course). You can boot in recovery by holding powerbutton and louder button when the device is powered of. Did you flash the correct xiaomi.eu rom for our device?
Flatric said:
Just type fastboot flash recovery [name_of_recovery.img].img (place the recovery.img in the correct folder on your computer of course). You can boot in recovery by holding powerbutton and louder button when the device is powered of. Did you flash the correct xiaomi.eu rom for our device?
Click to expand...
Click to collapse
Ok so booting into the recovery from the phone doesn't work Right now because i cannot shut the phone down. Every time i longpress the powerbutton or the powerbutton + volume button i just get a Restart into fastboot.
Aaand i just checked and idiot me downloaded the wrong Xiaomi.eu Rom .
It is just really unfortunate, that the official MiUi download Servers are offline and that i can't even get the official Version now.
neeboq said:
Ok so booting into the recovery from the phone doesn't work Right now because i cannot shut the phone down. Every time i longpress the powerbutton or the powerbutton + volume button i just get a Restart into fastboot.
Aaand i just checked and idiot me downloaded the wrong Xiaomi.eu Rom .
It is just really unfortunate, that the official MiUi download Servers are offline and that i can't even get the official Version now.
Click to expand...
Click to collapse
Well that means you most likely ****ed up the partitions on your phone... and when flashing the recovery doesn't work you have to wait for miui download servers(at least that's my point if knowledge)
---------- Post added at 20:48 ---------- Previous post was at 20:46 ----------
neeboq said:
Ok so booting into the recovery from the phone doesn't work Right now because i cannot shut the phone down. Every time i longpress the powerbutton or the powerbutton + volume button i just get a Restart into fastboot.
Aaand i just checked and idiot me downloaded the wrong Xiaomi.eu Rom .
It is just really unfortunate, that the official MiUi download Servers are offline and that i can't even get the official Version now.
Click to expand...
Click to collapse
Nevermind I got your back hehe http://en.miui.com/thread-2804733-1-1.html scroll a bit and you find a workaround to get the files just tested it and I can download the necessary roms
---------- Post added at 20:56 ---------- Previous post was at 20:48 ----------
Let me know if you were succesfull afterwards
Flatric said:
Well that means you most likely ****ed up the partitions on your phone... and when flashing the recovery doesn't work you have to wait for miui download servers(at least that's my point if knowledge)
---------- Post added at 20:48 ---------- Previous post was at 20:46 ----------
Nevermind I got your back hehe http://en.miui.com/thread-2804733-1-1.html scroll a bit and you find a workaround to get the files just tested it and I can download the necessary roms
Click to expand...
Click to collapse
Well this is Kind of embarrassing but after leaving the Phone unattended for ~10 minutes i found it turned off. I tried to get into the recovery with the power button + volume button and it worked. I am now downloading the(hopefully) Right Version of Xiaomi.eu and will try to install that.
Thank you so much for your help
neeboq said:
Well this is Kind of embarrassing but after leaving the Phone unattended for ~10 minutes i found it turned off. I tried to get into the recovery with the power button + volume button and it worked. I am now downloading the(hopefully) Right Version of Xiaomi.eu and will try to install that.
Thank you so much for your help
Click to expand...
Click to collapse
Good luck, if you got more questions just ask them
Unable to install miui eu beta zip rom
Hello, i hope you can help me out. I just unlocked Mix2s and it was a hard time to flash twrp on it. Twrp from miui eu forum website is no good i think. Very laggy and orange? So i succeeded flashing twrp v7 from xda. But when i want to install miui eu zip rom 8.7.19 it just won't happen. It seems the phone or twrp does not accept the rom. And it's the polaris rom. I just don't get it.
After unlocking i first flashed the fastboot rom (tgz) miui 10 (phone was on 9.6), but i think that was not necessary. After that i flashed twrp and formatted, because i wanted a clean flash of the eu rom. Was formatting a mistake?
Is my phone missing a partition / file now?
It just won't install the zip rom.
Any suggestions? Thanks!
From what I remember it had TWRP on it, I had it rooted on stock image for a while. Got absolutely fed up with their software and tried to install a stock android rom on it. Got through a few that wouldn't load properly so went to go back to a stock rom and it's stuck in a bootloop now. I've never been able to get into recovery no matter what button combo. It goes to the yellow text page then reboots. Not matter what combo of buttons i push.
Not really sure what to look for or what to do beyond this point as most help i've found has been guided to get into recovery. The most I've been able to get is this basically a downward facing parentheses with a small circle that appears and runs through it.
Can you get into fastboot? - Turn it off, connect USB and hold power and vol -
If yes, its easy to fix. Or you can try going to eRecovery and Format all data and download latest software.
Just tried. That would be a yes.
bump.
Did you fix it or you still need help? If yes, what version of android were you using? Do you have an sd card you can use to install stock firmware?
The point is, we need to get you running on oreo, after that is everything ez. There is probably no way of getting oreo other way than using hisuite, but I dont know. For hisuite. To make hisuite show oreo update, you need to get latest nougat running on your phone. It should be ez with twrp. You can use firmware finder on windows or other phone to download proper full ota update and flash trough twrp. If anything, feel free to ask me here.
Still stuck at the fastboot option. I don't really remember what version it was. Whatever it was exactly 1 year ago is all I can remember. I don't think it was oreo though?
I can't use TWRP though, as I said, I can't get into any recovery stock or TWRP, only fastboot.
delete
Spykez0129 said:
Still stuck at the fastboot option. I don't really remember what version it was. Whatever it was exactly 1 year ago is all I can remember. I don't think it was oreo though?
I can't use TWRP though, as I said, I can't get into any recovery stock or TWRP, only fastboot.
Click to expand...
Click to collapse
Did you tried Dload? It should work. Download latest nougat for your device from firmware finder and flash it with Dload.
EDIT: If fastboot works, just download latest twrp for nougat and flash it. After that just downlaod stock nougat and flash trough twrp.
PremiumBlaze said:
Are you able to flash anything in fastboot like the stock recovery?
Does fastboot say that the phone is unlocked?
Does fastboot say that FRP is unlocked?
Click to expand...
Click to collapse
Says both are unlocked. I flashed the latest recovery (for nougat) to it and both said ok.
Then I did fastboot reboot recovery command and it says OKAY on the sending, but under "booting" it says FAILED. Command not allowed?
Can't manually boot into twrp either, phone stays stuck on your device is booting now.
delete