Hey guys,
my bootloader is unlocked - so far, so good. however though, when I want to flash cwm, I'm getting this result:
C:\xyz>fastboot flash recovery cwmrecovery.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'recovery' (6632 KB)...
OKAY [ 0.558s]
writing 'recovery'...
OKAY [ 1.838s]
finished. total time: 2.397s
so it looks successful. But I still have the stock recovery. When I'm trying the rom manager from the playstore alternatively, I'm getting an error right aways after the cwm download (looks as if nothing happened in between). Error message is simply "An error occurred while flashing your recovery"
Any suggestions?
Thanks!
After you fastboot flash recovery, IMMEDIATELY reboot to recovery. Do not reboot to Android.
Take a backup. Then boot to Android... should stick.
Yeah, I learned that the hard way....
Sent from my SPH-D700 using Tapatalk 2
jeffreyjicha said:
Yeah, I learned that the hard way....
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Weird! I had the similar issue as described above. I'm able to successfully flash the CWM flash to the SPH-710 for me. However, can't boot INITIALLY to the CWM boot; It's able to successfully go into normal boot; But Volume-UP, Center button Power button, just blinks the custom boot screen once then the screen becomes blank for some time.
Can't get out of the Stock ROM boot up to CWM;
My Nexus 5 started bootlooping suddenly. I havent rooted my nexus5. I guess it will get fixed if I root it.
So I went to recovery mode and dead android guy came up with red exclamation and 'no command' shown. I pressed power+volUP but nothing happened. And also that screen doesnt stay for long, it will restart after few seconds and continue with the boot loop.
I tried cmd and entered "fastboot flash recovery recovery.img". The cmd shows
Target reported max download size of 1073741824 bytes
sending recovery <14582 kb> ...
OKAY [0.64S]
writing recovery...
OKAY [1.109s]
finished. total time: 1.754s
After this when I go to recovery mode, it still shows no command and starts bootloop again
PLEASE HELP
Problem with oopof1 phone
I have made Rom for the wrong phone oppof1f and the phone has stopped on this logo
I do not move I have stood on this and I can not enter the recovery permanently, what is the solution?
And sorry if the subject is not in place
Picture of the problem
store6.up-00.com/2017-05/149603505807811.png
So it looks like its trying to install the rom.
if you cant enter recovery.
extract the recovery.img for the stock rom in the link below
boot into fastboot (power and volume up) then,
fastboot flash recovery recovery.img
if you can enter recovery do this.
Turn off the phone and put this rom for the f1f on the micro sd card.
http://community.oppo.com/en/forum.php?mod=viewthread&tid=46153
then hold the power button and volume down and it should come up with a langauge to pick.
then press install from sd card.
select the rom.
if it fails keep trying. u can also try wiping data and cache
Jamie_oppo said:
So it looks like its trying to install the rom.
if you cant enter recovery.
extract the recovery.img for the stock rom in the link below
boot into fastboot (power and volume up) then,
fastboot flash recovery recovery.img
if you can enter recovery do this.
Turn off the phone and put this rom for the f1f on the micro sd card.
http://community.oppo.com/en/forum.php?mod=viewthread&tid=46153
then hold the power button and volume down and it should come up with a langauge to pick.
then press install from sd card.
select the rom.
if it fails keep trying. u can also try wiping data and cache
Click to expand...
Click to collapse
When you press the power button and the volume down, this message appears
Store6.up-00.com/2017-05/149603505807811.png
And unable to enter into recovery
Unable to access your phone
up up up up
If fastboot mode is working, you can try to boot another recovery (twrp, with fastboot boot twrp.img) and wipe the cache partition (that might have update information on it).
If it's not enough, I'd try to wipe data. But before that, try to backup things while TWRP is working.
tarek.eid said:
up up up up
Click to expand...
Click to collapse
Can you boot unto fast boot using power and volume up?
kdd998 said:
If fastboot mode is working, you can try to boot another recovery (twrp, with fastboot boot twrp.img) and wipe the cache partition (that might have update information on it).
If it's not enough, I'd try to wipe data. But before that, try to backup things while TWRP is working.
Click to expand...
Click to collapse
Yes FastBoot mode works
And when working twrp.img recovery
Of this site
Https://twrp.me/devices/oppof1.html
But there is a problem with the message
Target reported max download size of 268435456 bytes
Sending 'recovery' (25858 KB) ...
OKAY [1.142s]
Writing 'recovery' ...
FAILED (remote: Partition flashing is not allowed)
Finished. Total time: 1.157s
Can you explain
Clear the cache section
Jamie_oppo said:
Can you boot unto fast boot using power and volume up?
Click to expand...
Click to collapse
Yes I know how to login to FastBoot mode
But this message appears after the steps are executed
Target reported max download size of 268435456 bytes
Sending 'recovery' (25858 KB) ...
OKAY [1.142s]
Writing 'recovery' ...
FAILED (remote: Partition flashing is not allowed)
Finished. Total time: 1.157s
tarek.eid said:
Yes I know how to login to FastBoot mode
But this message appears after the steps are executed
Target reported max download size of 268435456 bytes
Sending 'recovery' (25858 KB) ...
OKAY [1.142s]
Writing 'recovery' ...
FAILED (remote: Partition flashing is not allowed)
Finished. Total time: 1.157s
Click to expand...
Click to collapse
Type fastboot oem unlock then repeat
Jamie_oppo said:
Type fastboot oem unlock then repeat
Click to expand...
Click to collapse
This message has not been opened
FAILED (remote: oem unlock is not allowed)
Finished. Total time: 0.009s
tarek.eid said:
This message has not been opened
FAILED (remote: oem unlock is not allowed)
Finished. Total time: 0.009s
Click to expand...
Click to collapse
Looks like you have a locked bootloader with unlocking disabled via developer options. With bootloader locked,no recovery and cant boot to rom to enable bootloader unlocking you only real option is to follow instuctions in this post to flash back to original stock firmware using low level QDloader to flash entire phone in factory mode.
PS This is only for f1f not f1s. You do have a f1f, right?
MiniBlu said:
Looks like you have a locked bootloader with unlocking disabled via developer options. With bootloader locked,no recovery and cant boot to rom to enable bootloader unlocking you only real option is to follow instuctions in this post to flash back to original stock firmware using low level QDloader to flash entire phone in factory mode.
PS This is only for f1f not f1s. You do have a f1f, right?
Click to expand...
Click to collapse
Yes my phone is f1f
I will carry
Https://drive.google.com/file/d/0B3vGskcdFbBcVThPS3FIb2dkdGs/view?usp=drivesdk
I will try
Take you
There is a problem with these definitions
Qualcomm HS-USB QDLoader 9008 (COM5
A triangle sign appears that needs to be defined
Does this affect
Even if it has a possible impact on its definition
tarek.eid said:
There is a problem with these definitions
Qualcomm HS-USB QDLoader 9008 (COM5
A triangle sign appears that needs to be defined
Does this affect
Even if it has a possible impact on its definition
Click to expand...
Click to collapse
You need to follow the instruction in the post I linked and "Install the QDLoader driver found in the DRIVER directory of the extracted archive". If its using the correct drivers the triangle should not be there. (you mean in contol panel?)
If you have problems PM the quy who posted the link. He said he would help.
Hello,
Edit: Don't know how or why, but after a couple of more tries I was able to boot the recovery directly and flash the rom. So everything is working fine right now. Admin/mod, would you like to close this thread? Thank you
For some reason I wanted to flash a new rom on my XT1039. In the process I screwed up and got it softbricked. I already had a look at the thread started by alfread56 and although the situation seems quite similar, the offered solutions didn't work out for me.
Right now my phone doens't have any rom installed. Flashing twrp with fastboot suggest everything works allright (using a linux system by the way):
fastboot flash recovery recovery.img
(bootloader) has-slot:recovery: not found
target reported max download size of 536870912 bytes
sending 'recovery' (8314 KB)...
OKAY [ 0.295s]
writing 'recovery'...
OKAY [ 0.303s]
finished. total time: 0.598s
After the reboot and holding the buttons for recovery mode I still get the stock recovery screen. When I select recovery in this menu, the phone shuts down. Because I know holding the recovery buttons on reboot takes some timing, I have redone the procedure of flashing twrp and holding the buttons numerous times. But it never went to the twrp recovery.
Then I tried to boot the twrp image directly with
$ fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.290s]
booting...
OKAY [ 0.230s]
finished. total time: 0.520s
Here I made a mistake: I have also flashed the boot partition with the twrp image with fastboot flash boot recovery.img (don't know how much of problem this is).
Booting up the TWRP image works fine. Then I've wiped dalvik, cache, data, internal storage and after several runs also deleted system by accident, and factory reset. When trying to flash the lineage zip everything works out fine for about 1 second, then the screen flashes en the phone is back in the TWRP screen. Too quick for me to see what the output is, but I do see there are not red marked lines (no errors)
I have tried it with several different ROMS (al checked), with several versions of TWRP and with fastboot and mfastboot. Does anybody know a solution on how to get twrp recovery working on my phone, or why I can't flash a rom when I boot twrp directly? Any help is appreciated!
Thank you in advance.
Regards,
weisa4564
Hi. I was following the instruction<oneplusDOTgadgethacksDOTcom/how-to/update-your-oneplus-7-pro-without-losing-root-no-computer-needed-0208078> to upgrade the os on the pro. One step is to install TWRP. I followed the instruction<twrpDOTme/oneplus/oneplus7proDOThtml> and run "fastboot boot twrp-xxxx.img". It finished and my phone displayed "fastboot mode" and freezed there. I tried to hold the power button and hold power button & volume down button. Neither worked. Aappreciate any help.
I only have a macbook pro.
Log:
> fastboot boot twrp-xxxx.img
< waiting for any device >
Sending 'boot.img' (31704 KB) OKAY [ 0.682s]
Booting OKAY [ 0.121s]
Finished. Total time: 0.868s
screenshot: i.ibb.co/pRtwJ4L/IMG-1533.jpg
buy pc
other solution is maybe to use usb2.
superflb said:
Hi. I was following the instruction<oneplusDOTgadgethacksDOTcom/how-to/update-your-oneplus-7-pro-without-losing-root-no-computer-needed-0208078> to upgrade the os on the pro. One step is to install TWRP. I followed the instruction<twrpDOTme/oneplus/oneplus7proDOThtml> and run "fastboot boot twrp-xxxx.img". It finished and my phone displayed "fastboot mode" and freezed there. I tried to hold the power button and hold power button & volume down button. Neither worked. Aappreciate any help.
I only have a macbook pro.
Log:
> fastboot boot twrp-xxxx.img
< waiting for any device >
Sending 'boot.img' (31704 KB) OKAY [ 0.682s]
Booting OKAY [ 0.121s]
Finished. Total time: 0.868s
screenshot: i.ibb.co/pRtwJ4L/IMG-1533.jpg
Click to expand...
Click to collapse
You can upgrade the is without twrp,just go for local upgrade in updater app.
Also the terminal should show downloading boot.img message which is not shown in your case and it is evident that something is wrong.
Mess around a bit and you will figure it out