I just flashed the official Android Pie OOS from 5.1.11 through original local upgrade method and when I tried to boot twrp on this new rom, it takes me to CrashDump mode instead. Where did I do wrong?
Sugarcube8th said:
I just flashed the official Android Pie OOS from 5.1.11 through original local upgrade method and when I tried to boot twrp on this new rom, it takes me to CrashDump mode instead. Where did I do wrong?
Click to expand...
Click to collapse
wrong twrp used. https://forum.xda-developers.com/devdb/project/?id=27466#downloads twrp-3.2.3-x_blu_spark_v9.85v2_op6.img twrp-3.2.3-x_blu_spark_v9.85v2_op6.zip those are the twrp to use.
Use blu spark twrp version.
Also note to you: when you flash through OTA you will loose twrp.
It's better for you to boot to twtp
Flash rom
Flash twrp
Reboot to twrp and flash latest magisk if you want root.
So always after rom flash you flash twrp.
Go to
https://forum.xda-developers.com/oneplus-6/how-to/official-oxygenos-5-1-5-ota-oneplus-6-t3794232
Sent from my OnePlus6 using XDA Labs
Related
I am using the Oos 5.1.5 and running unofficial TWRP 3.2.1-0 (i think, but sure its the unofficial build). I am rooted using magisk 16.4.
I want to upgrade to oos 5.1.6 using the zip file and also be rooted and also upgrade to twrp official version for oneplus 6 (if its better than unofficial).
So i want to upgrade to oos 5.1.6 using the twrp through the oos zip file.
If its possible please guide me. Btw i dont want to lose twrp or root or magisk......
Thank you in advance.....
I have upgraded my device using vpn for my phone now frequently freezes after so.e time of usage. I need to than power off and on the phome again.
You will lose twrp, root and magisk when you upgrade - it is unavoidable because of how the A/B partitions work. However , it's easy to get back.
There are multiple how-to guides in the Guides forum. Here's one: https://forum.xda-developers.com/oneplus-6/how-to/how-to-update-oos-5-1-6-install-t3801822
Just download the full zip locally. Flash it in twrp. Boot into fastboot. Flash twrp boot img through adb command which boots you into temporary official twrp. Then flash the official OP5 twrp zip which your can find through Google. Reflash magisk.
Suraj6ironman said:
I am using the Oos 5.1.5 and running unofficial TWRP 3.2.1-0 (i think, but sure its the unofficial build). I am rooted using magisk 16.4.
I want to upgrade to oos 5.1.6 using the zip file and also be rooted and also upgrade to twrp official version for oneplus 6 (if its better than unofficial).
So i want to upgrade to oos 5.1.6 using the twrp through the oos zip file.
If its possible please guide me. Btw i dont want to lose twrp or root or magisk......
Thank you in advance.....
Click to expand...
Click to collapse
Reboot recovery
Flash twrp installer zip (official)
Reboot twrp
Flash 5.1.6 full rom
Flash twrp installer zip ( official)
Flash magisk 16.0
Wipe cache/davlik
Reboot system
I have installed incremental upgrades for 9.0.2 and 9.0.3 and been able to do a TWRP less root using Magisk. For the upgrade to 9.0.4 I downloaded and installed the full upgrade. Following installation of oos_9.0.4_patched_boot.img, my phone reboots to recovery so I am unable to load Magisk. So I have to reinstall oos_9.0.4_stock_boot.img and stay unrooted. I can't find a similar problem - am I unique? Any solutions?
Solanoantuna said:
I have installed incremental upgrades for 9.0.2 and 9.0.3 and been able to do a TWRP less root using Magisk. For the upgrade to 9.0.4 I downloaded and installed the full upgrade. Following installation of oos_9.0.4_patched_boot.img, my phone reboots to recovery so I am unable to load Magisk. So I have to reinstall oos_9.0.4_stock_boot.img and stay unrooted. I can't find a similar problem - am I unique? Any solutions?
Click to expand...
Click to collapse
Flash Full OOS via fastboot (Guide: https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665 )
Then use fastboot to enter twrp blu_spark (TWRP: https://forum.xda-developers.com/devdb/project/?id=27466#downloads )
Then flash magisk (Magisk: https://forum.xda-developers.com/ap...k-v7-universal-systemless-t3473445?styleid=21 )
After magisk installed, reboot phone and install magisk app
Done.
PeterSmusi said:
Flash Full OOS via fastboot (Guide: https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665 )
Then use fastboot to enter twrp blu_spark (TWRP: https://forum.xda-developers.com/devdb/project/?id=27466#downloads )
Then flash magisk (Magisk: https://forum.xda-developers.com/ap...k-v7-universal-systemless-t3473445?styleid=21 )
After magisk installed, reboot phone and install magisk app
Done.
Click to expand...
Click to collapse
My apologies for the late reply. I'm not heavily into these things so I was reluctant to go into TWRP. So I ended up resetting my phone and now it all roots quite happily. But thanks for the ideas.
hii i have one plus 6 oxygen 9.0.6 but am not able to find out patched file
image
Deleted
After recently bricking my Oneplus 6 by trying to flash the latest TWRP on the latest Android 10 OTA from Oxygen Updater, I found a post from official TWRP explaining how root with a10 will take a while to implement due to changes that Google has made to their partitions.
So I guess for anyone trying this out on their own, be warned. You will probably end up bricking your device like I did and will probably end up having a bad time.
Please correct me if i'm wrong though, peace!
Edit: can confirm fastboot flash boot twrp-3.3.1-11-enchilada-Q-mauronofrio.img from the other popular post is working!
If you already have a working TWRP on OOS 9 you should be fine as long as you flash a working TWRP afterwards. Blu_spark TWRP 9.101 is compatible (please not 9.101 no earlier version will work).
Also don't use Magisk 20 only 20.1.
There is already a pre-patched version out there. You can fastboot flash it (as fastboot boot doesn't work). An easier way (without a pre-patched version) is currently being worked one as you pointed out already
just updated to a10
boot into twrp, flash new bluspark twrp
flash FULL ota a10 image
reflash twrp
reboot into twrp
boot into system
boot back to twrp
install magisk 20.1
a10, twrp and root working
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
nightfury04 said:
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
Click to expand...
Click to collapse
havent lost data and you can root again
Blu_spark twrp
could you please provide link for blu_spark twrp img, zip files that work with android 10?
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
nightfury04 said:
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
Click to expand...
Click to collapse
nope
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
akri1337 said:
nope
Click to expand...
Click to collapse
It would be of great help if you could provide link to working TWRP with android 10.
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
akri1337 said:
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
Click to expand...
Click to collapse
Which build did u use mate? R108 is not working with android 9, I tried flashing it using my older installed twrp.
It says unsupported android version. And in github r108 says only for android 10.
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
akri1337 said:
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
Click to expand...
Click to collapse
Thanks again mate.. I will give this one a try.
there is a problem with Magisk 20.1, after all flashes the system is booting ok with Magisk working but after I give first program root access and rebooting its stuck on bootloader and not booting to system.
nightfury04 said:
Thanks again mate.. I will give this one a try.
Click to expand...
Click to collapse
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
nightfury04 said:
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
Click to expand...
Click to collapse
Which magisk? Ver 20.1 ?
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
GunFishin said:
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
Click to expand...
Click to collapse
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
chetbiz said:
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
Click to expand...
Click to collapse
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
GunFishin said:
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
Click to expand...
Click to collapse
Yes, you will need to flash twrp with adb and going through the hole process of installing twrp and magisk, but for me its not worked well, after first boot to Android Q with magisk 20.1 and granting some apps root access when I rebooted the phone its not booting to system and going to bootloader, I think its related to some problem with magisk 20.1.
Hey guys,
got a OP6 for years. Stay on Stock OS with root. Never flashed any CustomRom or OS.
Bootet with fastboot boot twrp-version.img and flashed Magisk in twrp.
Works absolut fine until now. I installed the OTA and now i cant enter any twrp.
Information about my device:
Device: OnePlus6 A6003
OSS: 10.3.3
Android: 10
Build-Number: A6003_22_200414
USB-Debuggin: Enabled
OEM-Unlock: active
I tried all .img files from here:
eu.dl.twrp.me/enchilada/
and
twrp-3.2.3-x_blu_spark_v9.91_op.img
twrp-3.2.3-x_blu_spark_v9.86_op.img
No version working.
After flashing the 3.2.x versions i get a screen with
"qualcom crashdum mode
-------------"
With the newer 3.3x versions the screen just switch to "fastboot mode" and stay there forever.
How can i just boot into twrp with the new version? I wont twrp forever (flash). Just need to flash root after every OTA.
Thx for help!
Hilzerak said:
Just need to flash root after every OTA.
Click to expand...
Click to collapse
You could do that without TWRP. You just need to use Magisk's "Install to inactive slot" feature after installing OTA but before rebooting.
Hilzerak said:
Hey guys,
got a OP6 for years. Stay on Stock OS with root. Never flashed any CustomRom or OS.
Bootet with fastboot boot twrp-version.img and flashed Magisk in twrp.
Works absolut fine until now. I installed the OTA and now i cant enter any twrp.
Information about my device:
Device: OnePlus6 A6003
OSS: 10.3.3
Android: 10
Build-Number: A6003_22_200414
USB-Debuggin: Enabled
OEM-Unlock: active
I tried all .img files from here:
eu.dl.twrp.me/enchilada/
and
twrp-3.2.3-x_blu_spark_v9.91_op.img
twrp-3.2.3-x_blu_spark_v9.86_op.img
No version working.
After flashing the 3.2.x versions i get a screen with
"qualcom crashdum mode
-------------"
With the newer 3.3x versions the screen just switch to "fastboot mode" and stay there forever.
How can i just boot into twrp with the new version? I wont twrp forever (flash). Just need to flash root after every OTA.
Thx for help!
Click to expand...
Click to collapse
You should you twrp by
remewer said:
You could do that without TWRP. You just need to use Magisk's "Install to inactive slot" feature after installing OTA but before rebooting.
Click to expand...
Click to collapse
Try to in to recovery mode,if not,you try to flash twrp by mau.....
remewer said:
You could do that without TWRP. You just need to use Magisk's "Install to inactive slot" feature after installing OTA but before rebooting.
Click to expand...
Click to collapse
Thx for the info, helps for future.
But know i rebootet.
soihuvuontrang said:
You should you twrp by
Try to in to recovery mode,if not,you try to flash twrp by mau.....
Click to expand...
Click to collapse
Thx for reply but i dont know what excactly do you try to say me.
"You should you twrp by"? What should i try in recovery mode? And im looking forward for an solution without permanent flash, as i sayn above.
Hilzerak said:
Hey guys,
got a OP6 for years. Stay on Stock OS with root. Never flashed any CustomRom or OS.
Bootet with fastboot boot twrp-version.img and flashed Magisk in twrp.
Works absolut fine until now. I installed the OTA and now i cant enter any twrp.
Information about my device:
Device: OnePlus6 A6003
OSS: 10.3.3
Android: 10
Build-Number: A6003_22_200414
USB-Debuggin: Enabled
OEM-Unlock: active
I tried all .img files from here:
eu.dl.twrp.me/enchilada/
and
twrp-3.2.3-x_blu_spark_v9.91_op.img
twrp-3.2.3-x_blu_spark_v9.86_op.img
No version working.
After flashing the 3.2.x versions i get a screen with
"qualcom crashdum mode
-------------"
With the newer 3.3x versions the screen just switch to "fastboot mode" and stay there forever.
How can i just boot into twrp with the new version? I wont twrp forever (flash). Just need to flash root after every OTA.
Thx for help!
Click to expand...
Click to collapse
The version you tried to boot is not for android 10.
Versions for android 10 are blu_spark 9.108 and 9.109. Unfortunately, i think @eng.stk stopped providing img, but you can download lastest @mauronofrio TWRP and then flash @mauronofrio or blu_spark TWRP
Hilzerak said:
Thx for the info, helps for future.
But know i rebootet.
Thx for reply but i dont know what excactly do you try to say me.
"You should you twrp by"? What should i try in recovery mode? And im looking forward for an solution without permanent flash, as i sayn above.
Click to expand...
Click to collapse
After fashing twrp.img you boot into recovery and flash the file twrp.zip(the same series and name with file twrp.img)then reboot recovery.
Hi all so I am planning to install a Havoc OS on my phone with TWRP and Magisk
So my question is in the event that the install doesnt work out for me or that I dont like the rom (no rearson why I shouldnt) how do I get back to the original A10 rom?
I have downloaded the OxygenOS 10.0.6 [EU] OnePlus 7 Pro 5G.zip file from here already. Would I be able to go ahead boot into TWRP and flash this ifneeded?
TIA Bart
bartjunited said:
Hi all so I am planning to install a Havoc OS on my phone with TWRP and Magisk
So my question is in the event that the install doesnt work out for me or that I dont like the rom (no rearson why I shouldnt) how do I get back to the original A10 rom?
I have downloaded the OxygenOS 10.0.6 [EU] OnePlus 7 Pro 5G.zip file from here already. Would I be able to go ahead boot into TWRP and flash this ifneeded?
TIA Bart
Click to expand...
Click to collapse
Hi Bart,
Make sure you keep TWRP recovery after flashing custom Rom.
Then if you want to go back, flash official Rom zip on both slots after formatting data otherwise it won't boot.
Thanks for that.
Only thing I'm not sure is what you mean by flashing to both slots?
If for example you get a boot loop can you still get into TWRP?
I assume this is a yes as this is before it boots into the phones OS?
bartjunited said:
Thanks for that.
Only thing I'm not sure is what you mean by flashing to both slots?
If for example you get a boot loop can you still get into TWRP?
I assume this is a yes as this is before it boots into the phones OS?
Click to expand...
Click to collapse
When returning to stock,
format data
Flash stock zip
Flash TWRP
Reboot into recovery which is TWRP
Follow the same steps again and reboot...
If you end up in boot loop, don't stress. You can always flash TWRP recovery again via fastboot.