Custom binary blocked by FRP lock? - Samsung Galaxy S8+ Questions & Answers

Hello,
I have a Samsung Galaxy S8 phone (with TWRP rooted). When I turn on my phone, I get a message 'Custom binary blocked by FRP lock'. I can only access the download mode. I tried to flash to the latest stock firmware with odin but when I click start, it says PASS!! but nothing happens. It just gets back and reboots again with the same message. I tried so many things, but now I give up because I can't find any solution. Can someone please help me?
When I open download mode I see:
Odin mode
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G950F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: On
OEM LOCK: ON
Secure download: Enabled
(If you guys want to see more, I will post it)
This is what I get in Odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> sboot.bin.lz4
<ID:0/003> param.bin.lz4
<ID:0/003> up_param.bin.lz4
<ID:0/003> cm.bin.lz4
<ID:0/003> boot.img.lz4
<ID:0/003> recovery.img.lz4
<ID:0/003> system.img.lz4
<ID:0/003> userdata.img.lz4
<ID:0/003> modem.bin.lz4
<ID:0/003> modem_debug.bin.lz4
<ID:0/003> cache.img.lz4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
After this I get PASS!! on odin.
Please help me.
Thank you

Another FRP locked mobile.
Is boot locked?
Try this

bluheart said:
Another FRP locked mobile.
Is boot locked?
Try this
Click to expand...
Click to collapse
Thank you for your reply. Unfortunately it didn't work. In odin it gives FAIL!:
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 1996 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't know what my PDA is. Is that a problem?

With OEM lock and FRP lock, you should be able to flash latest stock and reboot.
Maybe you should unzip the downloaded file then see for the contents and then flash.

Related

[Q] Need help in selling!!! odin 1.85

] Need help! odin 1.85
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500DXLH1_S7500OLBLF1_S7500DXLH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
thank

Samsung w8 cant install bootloader/modem for SuperHero Rom

Hi
Is it possible to install a new bootloader (ex: the G930F) on my G930W8 (S7)? Because I want the SuperHero Rom on my device and Odin is showing me an error
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Note: I want to install the G930F modem too
Also, can't post in DevDB, I don't know why
No you can't flash a bootloader (or modem afaik) for a different model S7
If you had managed, you would be the proud owner of a brick atm

Trying to unbrick G930T and return to stock.

Hey, I'm trying to return to stock firmware but all I can do is enter recovery or download mode. I tried to download odin 3.11 and previous user used and flash latest stock firmware from sammobile but all I get in odin is fails.
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I'm flashing all 4 files CP,BL,AP,CSC
Sometimes I also get error FUSE 1 Binary or PIT
Any clues?
EDIT: WORKS!!! 3.11v of ODIN + SAMMOBILE latest Firmware. + restart of PC

stuck on sboot.bin when try to flash stock firmware SM-G955FD

First I got stuck in the "custom binary blocked FRP lock". and when i try to flash stock firmware, odin fails with some sboot.bin error...please help me someone
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
assassin410 said:
First I got stuck in the "custom binary blocked FRP lock". and when i try to flash stock firmware, odin fails with some sboot.bin error...please help me someone
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Stuck at the same issue, the problem probably is that the bootloader is the newest V3 version, which is not Downgradeable for now.
RapsodyR55 said:
Stuck at the same issue, the problem probably is that the bootloader is the newest V3 version, which is not Downgradeable for now.
Click to expand...
Click to collapse
I got the same problem, so do we have to wait for a new Odin Version?
I am also stuck at this situation. Completed the rooting process on my S8 950FD after installing some custom apps, it force reboot and is stuck in a boot loop with (only official release binaries are allowed to be flashed). I then try to flash it back to stock firmware but was successful, and had the same log messages as thread starter.
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I use:
Odin3 v3.13.1
Samsung firmware: Galaxy S8 SM-G950FD 8.0.0 June 15, 18 Singapore (XSP) G950FXXU2CREH
Stuck here as well!

galaxy a13 unable to flash stock firmware

half the time it errors the other half it gets stuck on setup connection
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1401)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 6882 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009>
<ID:0/009> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Odin engine v(ID:3.1401)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 6882 M
<ID:0/009> SetupConnection..
Which Galaxy a13?
Why Odin 3.14 and not 3.13.1?
What file are you flashing?
How did you set up Odin?
ze7zez said:
Which Galaxy a13?
Why Odin 3.14 and not 3.13.1?
What file are you flashing?
How did you set up Odin?
Click to expand...
Click to collapse
whats the difference?
stock rom
default settings
]
edit: tried again with 3.13
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 6958 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> up_param.bin
<ID:0/005> ldfw.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Categories

Resources