Related
Redmi Note 5/Pro Miui ROMs without firmware
We all know that Xiaomi added Anti roll-back to latest Stable/Beta ROMs and many users bricked their phones because of it, check my thread about ARB Here, then check out this one
Here ill provide Miui ROMs fully stock but without "firmware-update", to prevent any potential bricking while switching between Miui Based ROMs
Download Folders:
Here
Notes:
After flashing any of the builds above you cant go and flash FULL Miui ROMs to downgrade, just stick to my modded versions if you want to use older MIUI builds
No matter which Anti (3/4) you have, you can flash any of those ROMs with TWRP
Those ROMs doesnt affect your phone bootloader in any way, so you can roll back to your old ROM after Flashing any of the above builds
Old builds might get removed, so keep what you need locally, we will keep the latest 3 builds from every branch
Dont answer with false info's, i saw more than one reply with false statements
Be Nice to each other, no need for flaming in here
Dont post links to other ROMs here, i saw miuipro & eu links couple of posts back ( it could come with fw/bl)
Read OP, Search before posting
One more time, those ROMs wont remove or change your anti, if you come from anti 3 it will stay anti 3 after flashing, and same goes for anti 4
Again, if your phone is anti 4, you cant just simply go and flash FULL older ROM, even after flashing Modded builds, so stick with my builds
Anti 4 users can flash any of those builds just fine
[*]All the notes Above applies for My Modded builds only, do go and share it as facts for all Miui ROMs
Credits:
Me for the idea/testing
@akhilnarang for the script and mirroring @yshalsager for the script and mirroring
Note for CN Users
Note for CN Users:
before flashing any Global ROMs, you guys have to flash Global Cust from fastboot
Download Global Cust Here
Donwload dummy.img Here or attachments
then follow these steps:
Flash dummy.img from Fastboot to Enable Fastboot Commands
fastboot flash antirbpass dummy.img
then Flash cust-global.img
fastboot flash cust cust-global.img
Then Reboot into TWRP & Flash Global ROM
and this thx
so i can flash this over miui 8.7.12 and all the miui roms. doesn't matter if they are on anti v3 or anti v4?
Kapiljhajhria said:
so i can flash this over miui 8.7.12 and all the miui roms. doesn't matter if they are on anti v3 or anti v4?
Click to expand...
Click to collapse
Read Notes!!
i'm on 8.7.12 can i flash 8.7.12 in this thread and downgrade to miui9 like 9.5.6.0
mxilil said:
i'm on 8.7.12 can i flash 8.7.12 in this thread and downgrade to miui9 like 9.5.6.0
Click to expand...
Click to collapse
No!!, read notes please, those builds contain system, boot & vendor only, doesn't have anything to do with bootloader or anti
Wait for Modded Miui 9 builds!
?
Excellent thought. Keep it going!
Stable builds are UP!!
Enjoy
Thanks! Are these flashable through updater app? I mean since I can't flash official v9.5.17.0 global over v8.7.5 beta now as we have newer stable version 9.5.19.0 with ARB which I don't wanna flash yet. Also I have locked bootloader still 165 hrs to go until I can fastboot flash and downgrade but i really wanna go to stable ROM asap.
@AL_IRAQI
Hello, I am currently in an AOSP and TWRP installed, I am wanting to install to EU 8.7.12. If I do, can I go back to an AOSP again?
Obs: I read the notes but I still have doubts
thankful
For now i'm on 8.7.5 global official with bootloader locked (5 day left to unlock the bootlader) ! can i update to 8.7.12 global with the updater app ?
And will i stay on "Anti 3" or will i be on Anti 4 like it would if i update normally ?
I read the note too but these wasn't answered
ashishkotnala29 said:
Thanks! Are these flashable through updater app? I mean since I can't flash official v9.5.17.0 global over v8.7.5 beta now as we have newer stable version 9.5.19.0 with ARB which I don't wanna flash yet. Also I have locked bootloader still 165 hrs to go until I can fastboot flash and downgrade but i really wanna go to stable ROM asap.
Click to expand...
Click to collapse
TWRP Only, and it wont change your bootloader
eulipereira said:
@AL_IRAQI
Hello, I am currently in an AOSP and TWRP installed, I am wanting to install to EU 8.7.12. If I do, can I go back to an AOSP again?
Obs: I read the notes but I still have doubts
thankful
Click to expand...
Click to collapse
Yeah, it wont change your bootloader
tlf55 said:
For now i'm on 8.7.5 global official with bootloader locked (5 day left to unlock the bootlader) ! can i update to 8.7.12 global with the updater app ?
And will i stay on "Anti 3" or will i be on Anti 4 like it would if i update normally ?
I read the note too but these wasn't answered
Click to expand...
Click to collapse
Nope, you need TWRP to flash modded Zip's
Great work brother ???? you are life saver
AL_IRAQI said:
TWRP Only, and it wont change your bootloader
Yeah, it wont change your bootloader
Nope, you need TWRP to flash modded Zip's
Click to expand...
Click to collapse
Is it necessary to pass lazyflasher-no-verity-opt-encrypt?
Thanks for answering
thanks
Thank you. Works like a charm.
Still anti 3.
wabba1 said:
Thank you. Works like a charm.
Still anti 3.
Click to expand...
Click to collapse
Friend, did you pass lazyflasher-no-verity-opt-encrypt?
I flashed with Redwolf. Dm-verity and encryption both disabled in Options of Redwolf
Nice work bro.Keep up the good work
Hi, I just found a thread on MIUI forum which inspire me
http://en.miui.com/thread-3450268-1-1.html
Kudos to the OP in that thread
I tried the tutorial to one of my friend's Note 5, the tutorial works, so now we know that DOWNGRADING FROM 8.82 GLOBAL TO 8.7.26 GLOBAL IS POSSIBLE
Now I need someone with bricked devices because of downgrading to try it, you must download fastboot room first and sideload it to your redmi note 5
Here is the summary and the short version of the already short tutorial (lol), also some fixes needed, for those stuck in "MIUI CANT BE INSTALLED ON THIS DEVICE" error AND NEED AUTHORIZATION CODE TO FLASH
ALSO FOR THOSE IN ANTI 4 WITH FAKE UBL (MAINLY DEVICES SOLD IN INDONESIA), WHO WANT TO FLASH CHINA ROM AND BIND THE MI ACCOUNT TO THE DEVICE TO LATER REQUESTING UNLOCK TO XIAOMI
FOR THOSE WHOSE DEVICES ARE BRICKED BECAUSE OF DOWNGRADING, YOU CAN TRY TO DOWNLOAD THE FASTBOOT ROM AND FLASH IT WITH THE SAME STEP, NEVER TESTED IT WITH EDL MODE, SO ANYONE?
1. Xiaomi Tool
2. XiaomiTool ADB
3. MI FLASH PRO
4. ROM GLOBAL 9.5.19
5. ROM GLOBAL 8.7.26
6. ROM GLOBAL 8.8.2
7. ROM CHINA 8.7.26
8. DRIVER2 QUALCOM, ADB DLL YG BISA DICARI DI POST LAIN
THE STEPS :
1. FLASH YOUR NOTE 5 TO 8.8.2 GLOBAL ROM USING MI FLASH PRO
2. OPEN CMD AND SIDE LOAD USING XIAOMITOOL ADB, COMMAND IS xiaomiadb sideload_miui<spasi>namafile.zip. WHICH IS miui_HMNote5HMNote5ProGlobal_8.7.26_d7fb438aef_8.1.zip. YOUR DEVICE WILL BE DOWNGRADED TO 8.7.2.6 GLOBAL ROM
3. NOW FLASH YOUR PHONE USING ANY TOOL LIKE XIAOMITOOL TO 8.7.2.6 CHINA
4. VOILA, IT WORKS NOW
don't know when Xiaomi will close this bug hole, so try it while you can
Tried to downgrade from 8.82 Global Rom to 8.726 Rom Global, later flashed the China 8.726 rom and it worked
It means we still can downgrade, I think this is a bug in xiaomi server, can anyone use this bug for our advantage?
Thanks
codearm2 said:
FOR THOSE WHOSE DEVICES ARE BRICKED BECAUSE OF DOWNGRADING, YOU CAN TRY TO DOWNLOAD THE FASTBOOT ROM AND FLASH IT WITH THE SAME STEP, NEVER TESTED IT WITH EDL MODE, SO ANYONE?
Click to expand...
Click to collapse
1. if your device was on china rom from the very begining. you flashed global rom over china rom without unlocking BL, and phone got bricked (This MIUI version can not be installed on this device)
Click to expand...
Click to collapse
There should have been note posted about that guide: -
NOT FOR DEVICES HARD BRICKED BY DOWNGRADING ON ARP!
You still need access to recovery/fastboot for that tutorial to work.
i really want to downgrade my redmi note 7 pro. but there is arb. in mi community one person said if you want to downgrade then " download adb and fastboot and extract it , also copy the rom files into adb folder, then just run flashall.bat" is it true ? anyone tried? by this way can i use old miui version 10.2.8.0 (fastboot rom)? also may i lock bootloader after flashing this old version? please anyone help me ?
Please share downgrade process.
Abinesh2808 said:
i really want to downgrade my redmi note 7 pro. but there is arb. in mi community one person said if you want to downgrade then " download adb and fastboot and extract it , also copy the rom files into adb folder, then just run flashall.bat" is it true ? anyone tried? by this way can i use old miui version 10.2.8.0 (fastboot rom)? also may i lock bootloader after flashing this old version? please anyone help me ?
Click to expand...
Click to collapse
I also need to downgrade
Yes you can downgrade i already posted on xda named downgrade when mi flash fails
navi_58861170 said:
Yes you can downgrade i already posted on xda named downgrade when mi flash fails
Click to expand...
Click to collapse
bro I think you may be test this method with us. you said this same thing in all posts. (in mi community also). but there is no "clean & flash all.bat". i checked two versions of fastboot rom. they have only
1.flash all.bat
2.flash all except storage.bat
3.flash all lock.bat
sorry if i said anything inappropriate......?
navi_58861170 said:
Yes you can downgrade i already posted on xda named downgrade when mi flash fails
Click to expand...
Click to collapse
thank you bro. it works
Could anybody share how can I move from MiUI EU ROM for K30 11.0.15.0 to Poco X2 official build 11.0.7.0?
I installed EU ROM as I found flashing ROM with TWRP was easier than using Mi Flash tool, in case we want to switch between ROM's. But, after I installed 11.0.15.0 I figured lot of the custom ROM's do not boot after flashing them and phone boots into fastboot mode (except couple of ROM's). So, I have been looking at how switch back EU MiUI ROM from 11.0.15.0 to Poco X2 11.0.7.0. The issue am facing while flashing using Mi Flash tool is that it gives error of ARB (Anti rollback error: 2, also I checked the same by issuing fastboot getvar anti, it says 2), and I am not sure how to get past this.
Could someone please help me with this?
I think your device is triggered with anti-rollback. So you cannot install any rom with build less than 11.0.15.0 that is poco x2 11.0.7.0 cant be flashed. So, you have to wait until new poco build greater than 11.0.15.0 and then flash it. Until then, flash your existing rom or some custom rom. Do it carefully and dont ever flash older roms from now, if something goes wrong, your device will hardbrick and you will have to go to service center where they have authorized EDL access to your device to flash things. Best of Luck.
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
eagle06 said:
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
Click to expand...
Click to collapse
Bro, but what about anti-rollback hardbrick?.. new miui wont allow downgrade right? he has very newer build than 11.0.7.
eagle06 said:
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
Click to expand...
Click to collapse
vivek12341 said:
Bro, but what about anti-rollback hardbrick?.. new miui wont allow downgrade right? he has very newer build than 11.0.7.
Click to expand...
Click to collapse
@eagle06 am worried about 11.0.15.0 > 11.0.7.0 which will trigger ARB as @vivek12341 has pointed out and it will hard brick the device, from what I have read around, hence this post if anybody knows a way out. There seemed to be workarounds initially when Xiaomi introduced ARB, I have not seen anybody mentioning such things in recent times especially for MiUI 11.
The reason why I moved to 11.0.15.0 is was, as it has no bloatware etc, and I did NOT know about ARB, now that I have 11.0.15.0 most of the custom ROMs are based on Poco X2 11.0.7.0 and I am facing issues flashing ROMs based on 11.0.7.0, as the format data from TWRP does not wipe properly + I see 98% of the time device goes to fastboot mode even if I flash Poco stock recovery and clear the data, seems like 11.0.15.0 is also an issue
May be I will have to wait till Poco releases updates > 11.0.15.0 or for MiUI 12. Actually I still dont know, not many know much on this subject.
crDroid works without any issues (which is what my current daily driver, its a very stable ROM), flashing on 11.0.15.0 after clearing data, also any ROM whose dev releases fastboot ROM's those also I can flash and boot without issues, rest all ROM's dont and end up back in fastboot mode
coolcorner said:
Could anybody share how can I move from MiUI EU ROM for K30 11.0.15.0 to Poco X2 official build 11.0.7.0?
I installed EU ROM as I found flashing ROM with TWRP was easier than using Mi Flash tool, in case we want to switch between ROM's. But, after I installed 11.0.15.0 I figured lot of the custom ROM's do not boot after flashing them and phone boots into fastboot mode (except couple of ROM's). So, I have been looking at how switch back EU MiUI ROM from 11.0.15.0 to Poco X2 11.0.7.0. The issue am facing while flashing using Mi Flash tool is that it gives error of ARB (Anti rollback error: 2, also I checked the same by issuing fastboot getvar anti, it says 2), and I am not sure how to get past this.
Could someone please help me with this?
Click to expand...
Click to collapse
You should flash back to China rom (V11.0.15.0.QGHCNXM) using miflash and install TWRP-3.4.1B-0322 using fastboot. After that you can flash all custom roms as normal. I have tried almost all the custom roms and they all work without any problem.
Lol.. Bro i am on miui 12 beta and went back to 11.0.0.7 via twrp flash...
Just download this http://bigota.d.miui.com/V11.0.7.0....NGlobal_V11.0.7.0.QGHINXM_9c232b802a_10.0.zip
Open that in pc, modify the script and rename device name to phoenix from phoenixin.
On twrp format data.. Then reboot to twrp again, tranfer that zip file and just flash. You will be back on stock global 11.0.0.7
Also crdroid as you mentioned has custom vendor which is different from china eu or global one.
If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error.
eagle06 said:
Lol.. Bro i am on miui 12 beta and went back to 11.0.0.7 via twrp flash...
Just download this http://bigota.d.miui.com/V11.0.7.0....NGlobal_V11.0.7.0.QGHINXM_9c232b802a_10.0.zip
Open that in pc, modify the script and rename device name to phoenix from phonenixin.
On twrp format data.. Then reboot to twrp again, tranfer that zip file and just flash. You will be back on stock global 11.0.0.7
Also crdroid as you mentioned has custom vendor which is different from china eu or global one. e
If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error.
Click to expand...
Click to collapse
1. Which script are you talking about? I could not find any script. check attached snapshot.
2. And to do this step from TWRP to flash 11.0.7.0, do I need to be on MIUI EU ROM or I can flash from any custom ROM too?
3. You were on MIUI 12 beta (official global) and changed devicename from phoenixin to phoenix and flashed using TWRP after formatting data, without hitting ARB issue? Wow!
4. You mentioned https://forum.xda-developers.com/showpost.php?p=82502389&postcount=3 Telegram/Github where we can get official vendor zip which we can flash from TWRP, any links to that?
5. Is there a Redmi K30 global ROM which I can use instead of Poco X2, they should be same right?
eagle06 said:
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
Click to expand...
Click to collapse
Please share telegram or github link for vendor.zip which I can flash using TWRP. As crDroid has custom vendor may be that is why it works for me on EU ROM and I see other custom ROMs do not have vendor installed while flashing using TWRP.
jngiag said:
You should flash back to China rom (V11.0.15.0.QGHCNXM) using miflash and install TWRP-3.4.1B-0322 using fastboot. After that you can flash all custom roms as normal. I have tried almost all the custom roms and they all work without any problem.
Click to expand...
Click to collapse
As a final resort will go to China ROM V11.0.15.0.QGHCNXM (this will be chinese right?) or this itself is global K30 ROM? Any links to global official MIUI K30 ROM, all I get is K30 chinese ROM
Sorry, I am asking too many questions, I do not want to brick phone in these times and go stand in queue at Mi service center during these times, when the servicing engineer will touch my phone all over
coolcorner said:
1. Which script are you talking about? I could not find any script. check attached snapshot.
Its in META-INF/com/google/android/ file name updater-script. Change getprop("ro.product.device") == "phoenixin" || this to getprop("ro.product.device") == "phoenix" || . Why we are doing this? because we are using k30 twrp.. there is no special twrp for poco x2. phoenix = k30, phoenixin=poco x2
2. And to do this step from TWRP to flash 11.0.7.0, do I need to be on MIUI EU ROM or I can flash from any custom ROM too? Any rom
3. You were on MIUI 12 beta (official global) and changed devicename from phoenixin to phoenix and flashed using TWRP after formatting data, without hitting ARB issue? Wow! Yes with twrp. When you flashed twrp recovery , your device is now treated as K30 in twrp space
4. You mentioned https://forum.xda-developers.com/showpost.php?p=82502389&postcount=3 Telegram/Github where we can get official vendor zip which we can flash from TWRP, any links to that?check Pm , cant post telegram links here
5. Is there a Redmi K30 global ROM which I can use instead of Poco X2, they should be same right?Theres no K30 global.., poco x2 rom is global, k30 roms is china and there is eu custom rom based on chinese roms
Please share telegram or github link for vendor.zip which I can flash using TWRP. As crDroid has custom vendor may be that is why it works for me on EU ROM and I see other custom ROMs do not have vendor installed while flashing using TWRP.
Whenever you want to use custom rom without vendor , you need to flash either 11.0.0.7 zip or 11.0.0.7 vendor zip before flashing that custom rom
As a final resort will go to China ROM V11.0.15.0.QGHCNXM (this will be chinese right?) or this itself is global K30 ROM? Any links to global official MIUI K30 ROM, all I get is K30 chinese ROM
Sorry, I am asking too many questions, I do not want to brick phone in these times and go stand in queue at Mi service center during these times, when the servicing engineer will touch my phone all over
Click to expand...
Click to collapse
Check my replies in blue
coolcorner said:
As a final resort will go to China ROM V11.0.15.0.QGHCNXM (this will be chinese right?) or this itself is global K30 ROM? Any links to global official MIUI K30 ROM, all I get is K30 chinese ROM
Sorry, I am asking too many questions, I do not want to brick phone in these times and go stand in queue at Mi service center during these times, when the servicing engineer will touch my phone all over
Click to expand...
Click to collapse
It is a chinese rom. You can select english as your default language. It really doesn't matter as you are going to wipe it anyway if your purpose is to use it for flashing custom roms.
[Deleted]
coolcorner said:
Just now I tried flashing V11.0.15.0.QGHCNXM using Mi Flash tool, and I hit Anti Roll back error again. Not sure what I am missing here I am on same version 11.0.15.0 EU ROM which has same Anti 2, not sure why the error this time?
Click to expand...
Click to collapse
Bro If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error. Connect device and enable usb debugging and proceed.
Mi flash tool doesnt work for poco.....you always get that rollback error.
For fastboot zips use above tool.
For recovery zips use twrp.
Both methods flash the same thing and twrp will be replaced with stock recovery.
---------- Post added at 08:36 AM ---------- Previous post was at 08:20 AM ----------
Vendor only zip.
[ fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
Size : 1.12 GiB
Download : fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
https://drive.google.com/uc?id=1-mIvf3EhtZwLl_rg1cFgZIp5Zz4QlQZu&export=download
Flash via twrp. If you get error 7/wrong device check updater script and change name
eagle06 said:
Bro If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error. Connect device and enable usb debugging and proceed.
Mi flash tool doesnt work for poco.....you always get that rollback error.
For fastboot zips use above tool.
For recovery zips use twrp.
Both methods flash the same thing and twrp will be replaced with stock recovery.
Click to expand...
Click to collapse
Thanks, really appreciate your quick revert. I am trying out with xiaomitool now. I know TWRP method is simple, just edit/change the devicename. But, I am **** scared after seeing ARB error so many times. So using xiaomitool as you mentioned use it to overcome ARB error. I will update how it goes.
I thought Xiaomi is dev/custom dev friendly, seeing all these errors, no wonder why people resent MiUI so much, of course the hardware + price is good. From my search even Google on their devices is not this harsh about ARB blocking after unlocking bootloader.
eagle06 said:
Bro If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error. Connect device and enable usb debugging and proceed.
Mi flash tool doesnt work for poco.....you always get that rollback error.
For fastboot zips use above tool.
For recovery zips use twrp.
Both methods flash the same thing and twrp will be replaced with stock recovery.
---------- Post added at 08:36 AM ---------- Previous post was at 08:20 AM ----------
Vendor only zip.
[ fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
Size : 1.12 GiB
Download : fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
https://drive.google.com/uc?id=1-mIvf3EhtZwLl_rg1cFgZIp5Zz4QlQZu&export=download
Flash via twrp. If you get error 7/wrong device check updater script and change name
Click to expand...
Click to collapse
Thanks for the vendor image link.
Oh! yeah I am back in Poco 11.0.7.0 image, xiaomitool worked without issues. Thanks to you!!
@eagle06 do you know in this entire image (attached file) list (from tgz file) which is fastboot file? The reason I ask is, in Poco X2 in fastboot mode I see a single deadpixel, whereas when I was in EU MIUI I never saw that dead pixel. I plan to replace that file with EU MIUI fastboot image file, so when am in fastboot, it is clean without any dead pixels.
That small white pixel in fastboot is normal. All users have it including me.
Pic
eagle06 said:
Pic
Click to expand...
Click to collapse
Yep right that is the one. When I was on EU Miui, that one did not have, hence asked which is the image file for fastboot, thought I would flash that or replace next time I flash Poco stock when I am installing new custom ROM.
Yes, its a trivial thing can be ignored, does not really bother or harm.
BTW, so now that I am back in Poco X2 stock (On top of that I have installed BlissROM), next time I have to flash I can use either TWRP or Xiaomitool/V2.
1. For TWRP, I need to rename devicename to phoenix from phoenixin in updater-script and flash it using TWRP after clearing data
OR
2. I can use Xiaomitool/V2 with ADB debugging on (same step as last time)
Just check fastboot getvar anti for my phone, it also says 2. There is no problem for me flashing china rom with miflash. I have successfully flashed it 4 times before.
Good to have another way of flashing - will try the xiaomitool next time. :good:
jngiag said:
Just check fastboot getvar anti for my phone, it also says 2. There is no problem for me flashing china rom with miflash. I have successfully flashed it 4 times before.
Good to have another way of flashing - will try the xiaomitool next time. :good:
Click to expand...
Click to collapse
Woah! Miflash tool kept throwing errors at me and you are saying it worked for you? Phew!!
If I had flashed using TWRP, I might have been holding a 200gm brick in my hands LOL. Got lucky by using Xiaomitool/v2 then Thanks to you. I will stick to Xiaomitool for flashing stock ROMs hence forth.
Downloads:
- SP Flash Tool (Windows) https://spflashtools.com/windows
- SP Flash Tool (Linux) https://spflashtools.com/linux
Alternative Downloads:
If you are having problems for flashing on Windows with sp flash tool, give a try on these versions:
- SP Flash Tool v5.2020 https://spflashtools.com/windows/sp-flash-tool-v5-2020
- SP Flash Tool v5.1920 https://spflashtools.com/windows/sp-flash-tool-v5-1920
- SP Flash Tool v5.1916 https://spflashtools.com/windows/sp-flash-tool-v5-1916
It works with:
- Xiaomi Redmi 10X 4G
- Xiaomi Redmi Note 9
- Probably some others Xiaomi devices
Build dates:
- 2020/07/14
- 2020/03/06
- 2019/12/18
MD5 Hashes:
2020/07/14: c0189752968408c8009303d719c06494
2020/03/06: ffc2a1dbd2eb273ef4cd2fc6377b07a1
2019/12/18: 4f250e0a6a57255b037ac0de0ab98d5e
How to solve "LIB DA not match" error ?
Please, follow the guide "How to properly use the SP Flash Tool": https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4229939/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
#DownloadAgent #Download-Agent #NoAuth #NoAuthentication #No-Auth #No-Authentication
Does This DA need unlocked bootloader ?
Thank
empty.cad said:
Does This DA need unlocked bootloader ?
Thank
Click to expand...
Click to collapse
No. You can flash even with locked bootloader. But they may fail if you try to flash to any phone with V12.0.5.0 or higher already installed. I suggest you to flash to V12.0.4.0 using fastboot before. And then, try to flash using DA files. Keep atention if you flash any custom partition, it will not boot with locked bootloader. For customization, you will need unlocked bootloader.
You can backup your unlocked bootloader and then restore it too, using this guide: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4221065/
Good luck
VD171 said:
No. You can flash even with locked bootloader. But they may fail if you try to flash to any phone with V12.0.5.0 or higher already installed. I suggest you to flash to V12.0.4.0 using fastboot before. And then, try to flash using DA files. Keep atention if you flash any custom partition, it will not boot with locked bootloader. For customization, you will need unlocked bootloader.
You can backup your unlocked bootloader and then restore it too, using this guide: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4221065/
Good luck
Click to expand...
Click to collapse
Thank broather
does this work on 10x 5g? cuz my device is bricked and can't go either fastboot or recovery.
I tried all the things possible still no avail on fixing it after I used SP flash tool without any support MT68 on it
kurosaberex said:
does this work on 10x 5g? cuz my device is bricked and can't go either fastboot or recovery.
I tried all the things possible still no avail on fixing it after I used SP flash tool without any support MT68 on it
Click to expand...
Click to collapse
Yes. Try this: https://forum.xda-developers.com/t/...omi-redmi-10x-4g-xiaomi-redmi-note-9.4209295/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
VD171 said:
Downloads:
- SP Flash Tool (Windows) https://spflashtools.com/windows
- SP Flash Tool (Linux) https://spflashtools.com/linux
Alternative Downloads:
If you are having problems for flashing on Windows with sp flash tool, give a try on these versions:
- SP Flash Tool v5.2020 https://spflashtools.com/windows/sp-flash-tool-v5-2020
- SP Flash Tool v5.1920 https://spflashtools.com/windows/sp-flash-tool-v5-1920
- SP Flash Tool v5.1916 https://spflashtools.com/windows/sp-flash-tool-v5-1916
It works with:
- Xiaomi Redmi 10X 4G
- Xiaomi Redmi Note 9
- Probably some others Xiaomi devices
Build dates:
- 2020/07/14
- 2020/03/06
- 2019/12/18
MD5 Hashes:
2020/07/14: c0189752968408c8009303d719c06494
2020/03/06: ffc2a1dbd2eb273ef4cd2fc6377b07a1
2019/12/18: 4f250e0a6a57255b037ac0de0ab98d5e
How to solve "LIB DA not match" error ?
Please, follow the guide "How to properly use the SP Flash Tool": https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4229939/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
#DownloadAgent #Download-Agent #NoAuth #NoAuthentication #No-Auth #No-Authentication
Click to expand...
Click to collapse
Sir, is there a thread where I can understand how to choose the proper files.
Like I don't understand how to match scatter files to the DA files in the sp flash tools.
Actually? What is a scatter file and what is a DA file, and how to I put the Stock rom i downloaded on the SP flash tool.
Which files to choose.
Please help, my mi account is locked and i have no access to the old phone number.
kotta91 said:
Sir, is there a thread where I can understand how to choose the proper files.
Like I don't understand how to match scatter files to the DA files in the sp flash tools.
Actually? What is a scatter file and what is a DA file, and how to I put the Stock rom i downloaded on the SP flash tool.
Which files to choose.
Please help, my mi account is locked and i have no access to the old phone number.
Click to expand...
Click to collapse
If you never experienced sp flash tool, I strongly suggest you to watch some videos on youtube.
Brother,
Which one of your threads should I go to, if i did a factory reset, and I can't open the phone because it requires me to login with my MI account and it's locked and i have created a MI account with a phone number that I no longer have access to.
kotta91 said:
Brother,
Which one of your threads should I go to, if i did a factory reset, and I can't open the phone because it requires me to login with my MI account and it's locked and i have created a MI account with a phone number that I no longer have access to.
Click to expand...
Click to collapse
Try:
[GUIDE] How to remove and clear GOOGLE ACC and Mi ACC / MiCloud for MERLIN (Redmi Note 9 / Redmi 10X 4G)
WARNINGS: NEVER try to flash in "format all" mode ! Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI. USE AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR YOUR ACTIONS. Works with: - Xiaomi Redmi Note 9 - Xiaomi...
forum.xda-developers.com