[Q] Bricked. Erased/messed up bootloader. Win recognized as "HS-USB QDLoader 9008".
Hello.
Finally I hard bricked my Photon Q. I think I erased an unlocked bootloader. Right now phone cannot boot into fastboot mode. Power+Vol up, Power+Vol down held long do nothing. After connecting to Windows PC, phone is recognized as "HS-USB QDLoader 9008". I found drivers on the net. RSDlite recognizes device, but flashing fails with message that it cannot switch phone from download mode. I found QPST service software used to flash bootloader. Right now I think the problem is that I don't have proper bootloader images for Photon Q, and to be honest, I don't really know what options to use (the software seems quite complicated).
Has anyone encoutered (and solved) similar issues? Do you have any ideas, what to do? I tried some generic Qualcomm files, but couldn't flash them.
Anyone, please, help me, if you can.
Chris
Hi,
I have hard bricked my new yuphoria yu5010 mobile phone while trying to install stock ROM of yuphoria yu5010A.
Now, my phone is dead, does not blink LED, no charging.
Only, Device Manager showing port ::: Qualcomm HS-USB QDLoader 9008
Tried to recover using help from website :::
But, failed, as QFIL unable to download necessary MBN files using SAHARA protocol.
So, please send me MPRG8939.mbn or MPRG8936.mbn or MPRG8916.mbn and all necessary files to recover my dead yuphoria yu5010.
Please reply urgently.
Thanks.
@abhijeets
First you need to calm down. Don't post same topics/threads multiple time.
Follow this guide. All you need is a 16 GB memory card. If you face any problems reply with detailed information for solutions.
abhijeets said:
Hi,
I have hard bricked my new yuphoria yu5010 mobile phone while trying to install stock ROM of yuphoria yu5010A.
Now, my phone is dead, does not blink LED, no charging.
Only, Device Manager showing port ::: Qualcomm HS-USB QDLoader 9008
Tried to recover using help from website :::
But, failed, as QFIL unable to download necessary MBN files using SAHARA protocol.
So, please send me MPRG8939.mbn or MPRG8936.mbn or MPRG8916.mbn and all necessary files to recover my dead yuphoria yu5010.
Please reply urgently.
Thanks.
Click to expand...
Click to collapse
Were you able to fix the issue
Can anyone please share the buil.prop for YU5010, as i accidentally deleted mine and don't have a backup, please
Help Me With Necessary Files
i am having the same issue. were you able to fix your YU5010? please help. sahara protocol fail its shows this always at last. it is unable to download files from sahara protocol. my YU5010 is hardbricked. its shows itself as Qualcomm HS-USB QDLoader 9008 in ports in laptop. it doest not switch on neither it starts into fastboot mode nor it charges.
please send me the neccessary files.
please mail me the neccesary files on mail id
E-Mail: [email protected]
Same problem is here in my yuphoria . it doesnt showing anyone .I mean its not starting or not going into recovery mode or fastboot mode.!
parit_sharma said:
i am having the same issue. were you able to fix your YU5010? please help. sahara protocol fail its shows this always at last. it is unable to download files from sahara protocol. my YU5010 is hardbricked. its shows itself as Qualcomm HS-USB QDLoader 9008 in ports in laptop. it doest not switch on neither it starts into fastboot mode nor it charges.
please send me the neccessary files.
please mail me the neccesary files on mail id
E-Mail: [email protected]
Click to expand...
Click to collapse
were u able to solve the problem ?
dewankpant said:
Can anyone please share the buil.prop for YU5010, as i accidentally deleted mine and don't have a backup, please
Click to expand...
Click to collapse
just dirty flash your rom and it'll fix the issue.
Yuphoria not detected as QHSUSB_BULK
saurav007 said:
@abhijeets
First you need to calm down. Don't post same topics/threads multiple time.
Follow this guide. All you need is a 16 GB memory card. If you face any problems reply with detailed information for solutions.
Click to expand...
Click to collapse
Bro when I connect my yuphoria to pc its not even showing qhsusb_bulk or anything plz help me. Give ur whatsapp no plz.
Were you able to get qfil files?
parit_sharma said:
i am having the same issue. were you able to fix your YU5010? please help. sahara protocol fail its shows this always at last. it is unable to download files from sahara protocol. my YU5010 is hardbricked. its shows itself as Qualcomm HS-USB QDLoader 9008 in ports in laptop. it doest not switch on neither it starts into fastboot mode nor it charges.
please send me the neccessary files.
please mail me the neccesary files on mail id
E-Mail: [email protected]
Click to expand...
Click to collapse
Hi,
Were you able to get QFIL files for Yuphoria 5010? If "yes", please share the link.
Friends while flashing from bootloader
There was power cut
Yu5010a hardbrick
While connecting to pc
It takes drive 9008
But no com port
I created com port
OK
But if phone disconnected
Drive of pc don't disconnect
Pc hangs
On restart pc works fine
Not able to flash
Qfil don't take com port
Hard brick
Tested on win 7
Win 8.1
And win 10
No luck
Pc sucks
HELP ME PLEASE
hi everybody, I just try to repair the WiFI fix in my Zenfone V520KL, using the method described by the partner IDLeon, in the first way to put the phone in EDL mode, it indicates the following
Short guide.
1. You need be in EDL mode with installed drivers (Qualcomm HS-USB QDloader 9008).
I know 2 ways to do it.
a) Flash V520KL_all_WW_eng_T3.3.15 by AFT and reboot to EDL by adb command (adb reboot edl)
or
b)Use EDL cable.
I try to flash this archibe with AFT but the program tells me to set FRP Account, now that's? and where you get that key?
please help me, I don´t find nothing about that
Thank in advance
Can anyone help me with my lg k9? it has a boot error and does not enter download mode, it appears on the pc qualcomm 9008
Does anyone know a way to solve or how to create a firehose for this device? I can't find it anywhere on the internet
Hello I have a moto edge I had havoc on there and TWRP but I don't even really know what happened but I ended up bricking well not really bricked I can get in yo fastboot but the computer doesn't recognize the device I've switched cords computers tried every driver I can find I even went as far as to make my own edl cable to try to get it to edl more which one of the times playing with the edl cable i got it to say unknown device but haven't been able to since then if i boot to recovery it boot loops and same with just trying to boot I'm at a loss of what to try to do test points? To force edl? Please help
no need for EDL mode if you can still access fastboot. you can just install the drivers.
in fastboot mode format cache partition, that will fix TWRP boot-loop.
How to do that tho ?it doesn't recognize my device at all but it recognizes any other device I plug in
in device manager find the device with yellow triangle exclamation mark
Yeah no it's not there and when I can get it to make the noise it's from my home made edl Cable it says device descriptor error or something like that I'll look to see what it comes up as but I've installed drivers of uninstalled all the drivers I've got Qualcomm drivers I've got Motorola drivers I've got I've done all that or else I would have had it solved already I don't know what's going on with it and that's why I was asking about the edl test points because the computer won't read it whatsoever now it won't even get into fastboot but it won't get into edl neither I'm lost
try in linux lsusb (no virtual machine)
I had tried on Ubuntu with no luck it doesn't do anything at all now unless I edl Cable it and it says unknown USB device device descriptor request failed
does not sound like Ubuntu error message.
No that error is from windows I do not have access to my Ubuntu atm