Database Info

[ROM] SU4TL-44 100% Stock

SU4TL-44 Stock Image for XT1254: https://mega.nz/#!v4QWiITb!_0jWWzE4KWCEgT__C36rYe0vaTzGKcEFsZm0vvBtLBg
Flash with TWRP.
This package will flash every image in the SU4TL-44 firmware package except for recovery. It should bring your phone to almost 100% stock. The only image that is not included is the recovery image, because that would overwrite TWRP. If you need the stock recovery, revert to stock by following section 0 of my guide: http://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684.
Yes, it does include modems.
No, it will not re-lock your bootloader.
No, it won't erase your data, but you should do a factory reset in TWRP after flashing this. You might be able to get away without it if you're coming from a modified stock rom, but if you leave out the factory reset after coming from a CM-based rom, you're gonna have a bad time.
Thanks to @firstEncounter for letting me incorporate his flashable zip into this package.

Will have to download this later. Looked to go back to stock and wait for mm to come out.
Sent from my XT1254 using Tapatalk

Just to be clear, this doesn't flash re-lock the bootloader, right? So it's just the ROM... correct?

schwinn8 said:
Just to be clear, this doesn't flash re-lock the bootloader, right? So it's just the ROM... correct?
Click to expand...
Click to collapse
No it won't relock boot loader just installed it you will not be rooted and twrp will ask you if you want to root before reboot if you click no and want to at a later point just go back into boot loader by doing vol down power combo from power off and select open boot loader and when you click to reboot it will ask you again if you want to root then you can just slide to install

schwinn8 said:
Just to be clear, this doesn't flash re-lock the bootloader, right? So it's just the ROM... correct?
Click to expand...
Click to collapse
Correct

Can I install viper and su along with this?

MazinDLX said:
Can I install viper and su along with this?
Click to expand...
Click to collapse
Sure. Just flash the rom first and the mods second.

TheSt33v said:
Sure. Just flash the rom first and the mods second.
Click to expand...
Click to collapse
Ok last night I tried this in this order.
TWRP Backup & ADB Pulled Back-up folder
I then went into TWRP and wiped everything
ADB Pushed the image onto the phone
Installed, wiped dalvik & rebooted into a bootloop of the Motorola Symbol

MazinDLX said:
Ok last night I tried this in this order.
TWRP Backup & ADB Pulled Back-up folder
I then went into TWRP and wiped everything
ADB Pushed the image onto the phone
Installed, wiped dalvik & rebooted into a bootloop of the Motorola Symbol
Click to expand...
Click to collapse
I've never tried to install an image via ADB before. Did you mount the image elsewhere and extract the system folder, and then ADB-pushed that? If not, your bootloop is probably because there's just a big, unextracted system.img on your system partition, and not the actual files within it. Why not just flash it with TWRP? When I tested it, I flashed it via TWRP and it worked.
If you really don't want to flash it via TWRP for some reason, you can extract the system.img from the zip and flash it using fastboot (fastboot flash system system.img).
EDIT: Oh wait, I think I understand now. You just used ADB to put the zip on your phone, and then you installed it with TWRP. Got it. Well my next question is why use ADB at all? Why not just plug in your phone while it's booted into TWRP and use the native MTP to transfer files?

Its chromeos ****, and I'm just a fan of cmd line.
---------- Post added at 10:49 PM ---------- Previous post was at 10:48 PM ----------
I'm going to try again later, after wiping everything X5 and reinstalling CM12.1.
Its flawless.
---------- Post added at 10:50 PM ---------- Previous post was at 10:49 PM ----------
CM12.1 is flawless that is.

The boot.img should probably be included as well for people flashing this from a custom ROM, otherwise they will experience a boot loop.

MazinDLX said:
Its chromeos ****, and I'm just a fan of cmd line.
---------- Post added at 10:49 PM ---------- Previous post was at 10:48 PM ----------
I'm going to try again later, after wiping everything X5 and reinstalling CM12.1.
Its flawless.
---------- Post added at 10:50 PM ---------- Previous post was at 10:49 PM ----------
CM12.1 is flawless that is.
Click to expand...
Click to collapse
This package only flashes /system. CM flashes its own boot.img, which is why this isn't working for you. I'll try to find some time tonight to add in the other images in the stock firmware to this package. Sorry about that.

firstEncounter said:
The boot.img should probably be included as well for people flashing this from a custom ROM, otherwise they will experience a boot loop.
Click to expand...
Click to collapse
Great minds think alike. Do you know if boot.img will cover it, or are there other partitions that are flashed by CM that need to be included as well?

TheSt33v said:
Great minds think alike. Do you know if boot.img will cover it, or are there other partitions that are flashed by CM that need to be included as well?
Click to expand...
Click to collapse
Nope, just boot and system.
Feel free to include the bootloader/radio package from my thread into your zip if you'd like to make this equivalent to flashing a full stock firmware.

MazinDLX said:
Its chromeos ****, and I'm just a fan of cmd line.
---------- Post added at 10:49 PM ---------- Previous post was at 10:48 PM ----------
I'm going to try again later, after wiping everything X5 and reinstalling CM12.1.
Its flawless.
---------- Post added at 10:50 PM ---------- Previous post was at 10:49 PM ----------
CM12.1 is flawless that is.
Click to expand...
Click to collapse
I updated the link. It now flashes boot.img in addition to system.img. It should work for you now.

firstEncounter said:
Nope, just boot and system.
Feel free to include the bootloader/radio package from my thread into your zip if you'd like to make this equivalent to flashing a full stock firmware.
Click to expand...
Click to collapse
I'm not entirely sure how to write a script to flash those in TWRP. For boot and system, it's easy because the devices that they are flashed to match the names used by fastboot. Bootloader and radio seem to be a little different though. When I list the contents of /dev/block/bootdevice/by-name, there is no "motoboot" or "radio," which is what fastboot uses when you flash these. I do see "aboot" and "modem," and I'm pretty sure those are the targets I'm looking for, but I don't want to go flashing things unless I'm 100% sure. Since there's not a huge demand for figuring that out, and boot + system is all people will need in 99% of cases, I'll leave them out. Thanks though!

Downloading, my XDA hasn't been functioning right lately and I don't get get notified of the 3778328 threads I'm subscribed too lol
---------- Post added at 10:15 PM ---------- Previous post was at 10:13 PM ----------
Thanks for the quick responses, you got a tip jar link?

MazinDLX said:
Downloading, my XDA hasn't been functioning right lately and I don't get get notified of the 3778328 threads I'm subscribed too lol
---------- Post added at 10:15 PM ---------- Previous post was at 10:13 PM ----------
Thanks for the quick responses, you got a tip jar link?
Click to expand...
Click to collapse
No, but I appreciate the thought. Donate to this guy instead. He does way more than me and also needs it way more than me: http://forum.xda-developers.com/droid-turbo/development/computerfreekunlocked1-0-t3255945

TheSt33v said:
I updated the link. It now flashes boot.img in addition to system.img. It should work for you now.
Click to expand...
Click to collapse
Thus really helped for whatever reason after altering the fxz xml so I wouldn't lose data rsd lite said the xml files didn't match. I have done this before with no issues. I couldn't take the recent Ota because somehow the system was modified. I am guessing it was something from sunshine. I never rooted the phone just unlocked so I don't know how anything was modified. This made it so much easier flashed it flashed stock recovery and took ota thanks.

bigv5150 said:
Thus really helped for whatever reason after altering the fxz xml so I wouldn't lose data rsd lite said the xml files didn't match. I have done this before with no issues. I couldn't take the recent Ota because somehow the system was modified. I am guessing it was something from sunshine. I never rooted the phone just unlocked so I don't know how anything was modified. This made it so much easier flashed it flashed stock recovery and took ota thanks.
Click to expand...
Click to collapse
Awesome! That's why we do this

[ROM] LG G Stylo (H631) v20b Stock Restore and Update (Flashable Zips via TWRP)

Hi everyone,
Here i bring a quick way to FULL Restore/Update Stock to v20b (Marshmallow) as promise , no matter from which version you are coming from. (E.g...v10e,v10d,v10i,v10j,v10l)
- Base on Metro PCS user (MS631) you can use this Flashable Update files to update to Marshmallow, but don't quote me on that. -
- I have a report about Metro user who is stuck in LG Logo after flashing this so this mean any METRO PCS USERS DON'T Flash this till further notice. -​
This will restore or update your phone to full stock v20b (Marshmallow) deleting all trace of root and TWRP Custom Recovery (you can reflash if needed), your internal storage will be untouch.
but if you Unlock the Bootloader via Fastboot to get root again your Internal Storage is going to get WIPE / FACTORY RESET.
READ AND UNDERSTAND BEFORE PROCEEDING , YOU HAVE BEEN WARNED
DON'T BLAME YOUR DEVICE OR OP IF SOMETHING GOES WRONG AND YOU CREATE A ATOMIC EXPLOSION INSTEAD OF UPDATE A SIMPLE DEVICE :cyclops:
- YOU KNOW THE DRILL - I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE
- FINAL NOTE ....... THIS IS UNTESTED, REASON " I DON'T OWN A STYLO ANYMORE -
​
--------------------------------------------------------------------------------------------------------​
STEPS :
---------
1- Download BootStack zip (- Click Here for H63120b_Marshmallow_Bootstack.zip -)
(Thank you for the fix stack @TURBO2012 )
2- Download Return2Stock zip (Click Here for H63120b_Marshmallow_Return2Stock.zip)
3- Reboot to TWRP (Custom Recovery)
4. Flash LG G STYLO BOOTSTACK Zip file
5. Flash LG G STYLO Return 2 Stock Zip file
6. Wipe CACHE and DALVIK
7. Reboot (at this point you no longer have Root and TWRP and if were in LP, well you are in Marhmallow now -EVERYTHING WILL BE RESET BACK TO STOCK-)
-------------------------------------------------------------------------------
Thanks to @asialove2013 for posting/finding the H63120b KDZ which is the source for my Flashable Zip files
-------------------------------------------------------------------------------​
* Unlocking Bootloader and Root Guide By @T-Macgnolia
if that is little complicated to understand lemme know and i'll post my LG G4 Guide which is the same Steps for this Device, i just need to modified it a little , you know different files and such of course
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------​

Reserve for something else

Reserve if need after my last reserve

I have a metro pcs stylo on the stock 10j. Metro rom
Based on what i read i need to root and install twrp on my 10j 5.1.1 rom and then download the files you specified and flash as you instructed us to do?
If yes what root and twrp method do you recommend?
And THANK YOU!

xyourxhighnessx said:
I have a metro pcs stylo on the stock 10j. Metro rom
Based on what i read i need to root and install twrp on my 10j 5.1.1 rom and then download the files you specified and flash as you instructed us to do?
If yes what root and twrp method do you recommend?
And THANK YOU!
Click to expand...
Click to collapse
i recommend you going for the KDZ process, instead of Rooting and TWRP....
you can find the KDZ here and download the LG UP Tool to flashed and just follow the Unlock Bootloader / Root Guide from the link in the OP.
EDIT : I'll hold my self on this, someone using metro try my flashable zip and got stuck in LG Logo, just hold on there till we figure out what is going on.
EDIT 2 : anyone who have downloaded the Bootstack please Redownload the new file it say FIX at the end and DON'T use the old one cuz won't work ...sorry about that.

I am rooting as i write this then will install twrp and try with the Fix u posted , will report back shortly..
thanks!
Louie
---------- Post added at 10:07 PM ---------- Previous post was at 09:59 PM ----------
gives me an error when i try and flas the *,fix file.
it says Error executing updater binary in zip '/external_sd/ H63120b_Marshmallow_BootstackFIX.zip
error flashing zip
Louie

lmarisy said:
I am rooting as i write this then will install twrp and try with the Fix u posted , will report back shortly..
thanks!
Louie
---------- Post added at 10:07 PM ---------- Previous post was at 09:59 PM ----------
gives me an error when i try and flas the *,fix file.
it says Error executing updater binary in zip '/external_sd/ H63120b_Marshmallow_BootstackFIX.zip
error flashing zip
Louie
Click to expand...
Click to collapse
So your saying the latest bootstack fixed zip is not working as well ? I cant afford right now to be a guinea ? thats why im asking

xxbabiboi228xx said:
So your saying the latest bootstack fixed zip is not working as well ? I cant afford right now to be a guinea ? thats why im asking
Click to expand...
Click to collapse
No it's giving me an error whenever i try and flash it, i downloaded it 3 times incase i had a bad download but that was not the problem.
Louie

lmarisy said:
No it's giving me an error whenever i try and flash it, i downloaded it 3 times incase i had a bad download but that was not the problem.
Louie
Click to expand...
Click to collapse
What your saying its saying is there is something wrong with the binary file in the meta-inf folder of the flashable zip should be a easy fix for draken

xxbabiboi228xx said:
What your saying its saying is there is something wrong with the binary file in the meta-inf folder of the flashable zip should be a easy fix for draken
Click to expand...
Click to collapse
yes something is wrong with the actual *.Zip file...
Louie

Womp womp womp. Glad i kept my pants on. I was so ready to jump right in and flash it but i dont have a backup phone in the event i brick so I'll be waiting to see what comes of this.

I just got a note 3 and gave my son my stylo. It is the 10j version (new screen, more mp camera, ect.) I rooted with kingroot way back when I first got the stylo. Glad to see someone doing this. I want to update his phone to MM. But l learned from past mistakes not to just trust the kingroot "unroot" tool. So I knew I couldn't OTA anymore. I will be watching this thread to keep up with how this progresses.
Thanks for making this even though you don't have the device anymore.
Also glad I checked over here. Seems development has died on this device on Androidforums.com where I had to get my info about my Zmax.
Sent from my SM-N900T using Tapatalk
---------- Post added at 07:35 AM ---------- Previous post was at 07:12 AM ----------
DrakenFX said:
Hi everyone,
Here i bring a quick way to FULL Restore/Update Stock to v20b (Marshmallow) as promise , no matter from which version you are coming from. (E.g...v10e,v10d,v10i,v10j,v10l)
- Base on Metro PCS user (MS631) you can use this Flashable Update files to update to Marshmallow, but don't quote me on that. -
- I have a report about Metro user who is stuck in LG Logo after flashing this so this mean any METRO PCS USERS DON'T Flash this till further notice. -​
This will restore or update your phone to full stock v20b (Marshmallow) deleting all trace of root and TWRP Custom Recovery (you can reflash if needed), your internal storage will be untouch.
but if you Unlock the Bootloader via Fastboot to get root again your Internal Storage is going to get WIPE / FACTORY RESET.
READ AND UNDERSTAND BEFORE PROCEEDING , YOU HAVE BEEN WARNED
DON'T BLAME YOUR DEVICE OR OP IF SOMETHING GOES WRONG AND YOU CREATE A ATOMIC EXPLOSION INSTEAD OF UPDATE A SIMPLE DEVICE :cyclops:
- YOU KNOW THE DRILL - I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE
- FINAL NOTE ....... THIS IS UNTESTED, REASON " I DON'T OWN A STYLO ANYMORE -
​
--------------------------------------------------------------------------------------------------------​
STEPS :
---------
1- Download BootStack zip (- Click Here for H63120b_Marshmallow_BootstackFIX.zip -)
2- Download Return2Stock zip (Click Here for H63120b_Marshmallow_Return2Stock.zip)
3- Reboot to TWRP (Custom Recovery)
4. Flash LG G STYLO BOOTSTACK Zip file
5. Flash LG G STYLO Return 2 Stock Zip file
6. Wipe CACHE and DALVIK
7. Reboot (at this point you no longer have Root and TWRP and if were in LP, well you are in Marhmallow now -EVERYTHING WILL BE RESET BACK TO STOCK-)
-------------------------------------------------------------------------------
Thanks to @asialove2013 for posting/finding the H63120b KDZ which is the source for my Flashable Zip files
-------------------------------------------------------------------------------​
* Unlocking Bootloader and Root Guide By @T-Macgnolia
if that is little complicated to understand lemme know and i'll post my LG G4 Guide which is the same Steps for this Device, i just need to modified it a little , you know different files and such of course[emoji14]
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------​
Click to expand...
Click to collapse
Forgot to ask, is there anyway you could you please post md5 checks in your OP? Better to be safe than sorry when it comes to flashing files.
Again, thank you so much for this, especially since you no longer have the device.
Sent from my SM-N900T using Tapatalk

lmarisy said:
yes something is wrong with the actual *.Zip file...
Louie
Click to expand...
Click to collapse
xxbabiboi228xx said:
What your saying its saying is there is something wrong with the binary file in the meta-inf folder of the flashable zip should be a easy fix for draken
Click to expand...
Click to collapse
xxbabiboi228xx said:
So your saying the latest bootstack fixed zip is not working as well ? I cant afford right now to be a guinea thats why im asking
Click to expand...
Click to collapse
ok i updated the Binary on the zip file should work now, This is why i don't like posting without having Device for testing :crying:

auburn2eugene said:
I just got a note 3 and gave my son my stylo. It is the 10j version (new screen, more mp camera, ect.) I rooted with kingroot way back when I first got the stylo. Glad to see someone doing this. I want to update his phone to MM. But l learned from past mistakes not to just trust the kingroot "unroot" tool. So I knew I couldn't OTA anymore. I will be watching this thread to keep up with how this progresses.
Thanks for making this even though you don't have the device anymore.
Also glad I checked over here. Seems development has died on this device on Androidforums.com where I had to get my info about my Zmax.
Sent from my SM-N900T using Tapatalk
---------- Post added at 07:35 AM ---------- Previous post was at 07:12 AM ----------
Forgot to ask, is there anyway you could you please post md5 checks in your OP? Better to be safe than sorry when it comes to flashing files.
Again, thank you so much for this, especially since you no longer have the device.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
md5 is located in the download page, right next to where it say " Begin Download " check image

DrakenFX said:
ok i updated the Binary on the zip file should work now, This is why i don't like posting without having Device for testing :crying:
Click to expand...
Click to collapse
Any info on if it will work on the metro version yet?
Sent from my LGMS631 using Tapatalk

DrakenFX said:
md5 are the download link, right next to where it say " Begin Download " check image
Click to expand...
Click to collapse
Lol, sorry man. When I saw that it wasn't quite working yet, I didn't even click on them. Thanks a ton!
Sent from my SM-N900T using Tapatalk
---------- Post added at 08:21 AM ---------- Previous post was at 08:18 AM ----------
lmarisy said:
I am rooting as i write this then will install twrp and try with the Fix u posted , will report back shortly..
thanks!
Louie
---------- Post added at 10:07 PM ---------- Previous post was at 09:59 PM ----------
gives me an error when i try and flas the *,fix file.
it says Error executing updater binary in zip '/external_sd/ H63120b_Marshmallow_BootstackFIX.zip
error flashing zip
Louie
Click to expand...
Click to collapse
I can't afford to test, but am anxiously awaiting your test. Please report back after trying the new files!
Thanks to everyone working on this!
Sent from my SM-N900T using Tapatalk

Binary still wrong
Boot stack wont flash. Binary still wrong

Idk if this is against the rules or not (and if it is remove the link. And i apologize) but in the event its not someone may want to try this method if they are impatient about getting marshmallow on their metro stylo.
http://androidforums.com/threads/metro-pcs-lg-g-stylo-users-update-to-marshmallow.1011917/
I take no credit for this. Wasnt my work or idea. (Credit is given in op by the original poster)
Its many extra steps but supposedly works. Let me know what your experience was

I got my Metro Stylo up running 6.0 root and everything?

Using which method?

[ROM] MCG24.251-5 100% Stock

Flash using TWRP. This will flash all files in the MCG24.251-5 update except for recovery.
New features in this update that I've noticed:
-Marshmallow, aged to perfection in Verizon's own servers. Only one major release version obsolete, and with outdated security patches!
-WiFi calling (woooooo! Those custom roms just got another carrier-specific, unportable feature to compete with)
-The command center widget has been replaced with the Droid Turbo 2 version
Get it here: https://mega.nz/#!G1xg1aYa!fm2hUL7hDDVaxTAj_iPbtY61P-8VrQEvoOJiVsDtdho
Here's the stock recovery image if you want it: https://mega.nz/#!r1wDQRCJ!KHbo_Q6L-WE_VyB1x8W4FbT6PrerPEyn9H1C6VUAyf8
Flashing this rom updates the bootloader to a version that can communicate with the kernel to tell SafetyNet that it is unlocked, causing it to fail. Fret not, however, as there are two options to fix this:
OPTION 1: Flash the SU4TL-49 bootloader using the following TWRP package: https://mega.nz/#!6logEaIQ!q8qPJw65Upt38Hxiu1JyxErmwbgL7CBzuGzzPC0C9pQ
OPTION 2: Flash this patch made by @bhb27: https://www.androidfilehost.com/?fid=745425885120696423
Wipe cache and dalvik/art cache after either of these options.
NOTE that these options only fix failures due to SafetyNet checking the bootloader status. It will still fail due to root, xposed and the like. There are no known consequences or side effects to either of these options, so just pick whichever one you feel like.
If you notice weird things after you flash this rom (long boots other than the first one which is supposed to be long, random reboots, etc.) try flashing the stock recovery image and factory resetting.
If you want root, flash this version of SuperSU first, then flash whatever newer version you want: https://download.chainfire.eu/751/SuperSU/
If you have trouble flashing this, try TWRP Mod 3 instead of Mod 4.

Ouch, you have almost full flash inside archive, with bootloader too... Who is the most brave, introduce yourself ))
+ mirror

I can confirm that it works on old bootloader.
I had SULT-49 5.1 installed before and I just flashed this via TWRP. I haven't taken the OTA. It works perfectly. Thank you.
PS: My bootloader now is moto-apq8084-70.95 (2016-06-29). Do you have same version after taking OTA?

Did you have to wipe the system, data and cache first like you would with a new ROM or just dirty flash it?
Sent from my XT1254 using Tapatalk

Thanks OP

rickyblaze13 said:
Did you have to wipe the system, data and cache first like you would with a new ROM or just dirty flash it?
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
When in doubt, always wipe.

Hey everyone, what is your safetynet status with this rom? It's failing for me, and I can't figure out why.

rickyblaze13 said:
have to wipe the system, data and cache first
Click to expand...
Click to collapse
It works w/o, but, IMO, better wipe, than not. You don't need extra bugs, right )

It's completing setup now, I did a wipe after I backed up my phone. It's unlocked and rooted before I flashed the zip
Sent from my QMV7A using Tapatalk

Can we get this ULed to Dropbox or Google Drive? The Mega link and the mirror are taking forever...

Crowick said:
Can we get this ULed to Dropbox or Google Drive? The Mega link and the mirror are taking forever...
Click to expand...
Click to collapse
My google drive is full and I don't have Dropbox. But if you wanted to mirror it, I will gladly add the link to the OP.

Sure, I'll throw it up on Google Drive. Do you have just the MM stock recovery kicking around?
---------- Post added at 04:08 AM ---------- Previous post was at 03:50 AM ----------
Google Drive link to the TWRP Flashable version in your OP hosted on Mega.
https://drive.google.com/open?id=0BzQJqGBWW9ViQzFjTWJVUVZNazg

Crowick said:
Sure, I'll throw it up on Google Drive. Do you have just the MM stock recovery kicking around?
---------- Post added at 04:08 AM ---------- Previous post was at 03:50 AM ----------
Google Drive link to the TWRP Flashable version in your OP hosted on Mega.
https://drive.google.com/open?id=0BzQJqGBWW9ViQzFjTWJVUVZNazg
Click to expand...
Click to collapse
thanks for gdrive mirror

Crowick said:
Sure, I'll throw it up on Google Drive. Do you have just the MM stock recovery kicking around?
---------- Post added at 04:08 AM ---------- Previous post was at 03:50 AM ----------
Google Drive link to the TWRP Flashable version in your OP hosted on Mega.
https://drive.google.com/open?id=0BzQJqGBWW9ViQzFjTWJVUVZNazg
Click to expand...
Click to collapse
I don't. I don't know how I would get it since I need root access to get it, and I can't get root access without TWRP, and I have to overwrite the stock recovery to get TWRP.

TheSt33v said:
I have to overwrite the stock recovery to get TWRP.
Click to expand...
Click to collapse
fastboot boot TWRP.img

s5610 said:
fastboot boot TWRP.img
Click to expand...
Click to collapse
Nice! Good call.
https://mega.nz/#!r1wDQRCJ!KHbo_Q6L-WE_VyB1x8W4FbT6PrerPEyn9H1C6VUAyf8

Is anyone else having exceptionally long reboot/start times for their phone after flashing this rom?

Just the first boot after flashing
Sent from my XT1254 using Tapatalk

Thanks for that! Did anybody try to install it right over SU4TL-44? Just in case, I'm rooted, using xposed and twrp.

TheSt33v said:
Hey everyone, what is your safetynet status with this rom? It's failing for me, and I can't figure out why.
Click to expand...
Click to collapse
Perhaps this:
https://www.xda-developers.com/android-safetynet-now-reportedly-tripped-by-unlocked-bootloaders/
I just tried using AP a few hours ago and it failed with the screen in the article. OTA with unlocked bootloader.

[DISCONTINUED] ROOT Method For Nougat

DISCONTINUED​New Thread Found Here ​
This Root Method For S7 Nougat
Nougat_S7_Root_2_82_All_Carriers_V2.zip Includes Fingerprint Fix [Latest Verison]
Nougat_S7_Root_2_81_All_Carriers_V2.zip Includes Fingerprint Fix
Nougat_S7_Root_2_79_All.zip For Ufirm Includes Fingerprint Fix
Download Nougat Eng Boot.img Flash in odin
S7_SU_2_79_Root_Unroot_WO_Tweaks_V3.zip Old method
S7_VOLTE_ICON_FIX_ALL_VARIANTS.zip
HotSpot_Fix_VZW_QA2.zip
HotSpot_Fix_VZW_QA4.zip
HotSpot_Fix_VZW_QC5.zip
HotSpot_Fix_VZW_QC9.zip
HotSpot_Fix_VZW_QF2.zip
Directions:
1. Shut off the phone and boot into download mode (volume down, home, and power). Use Odin And Flash Nougat_S7_Edge_EngBoot.tar.md5 In AP Slot
2. When the phone reboots, plug in phone to computer unlock developer options and enable USB debugging and Disable Verify Apps Over USB.
3. Unzip the Nougat_S7_Root_2_82_All_Carriers_V2.zip and run root.bat from your PC. If you Have Windows 10 from inside the Nougat_S7_Root_2_82_All_Carriers_V2 folder you may need press and hold shift and right click and click open command window here from the dialog box then in command prompt type name of the root bat you want to run and hit enter
4. This will install root when done phone will reboot
5. The process wipes dalvik cache so it will take a few minutes to reboot
6. If having problems getting Grant SuperSU dialog to come up you can delete the SuperSU app and root will be granted instantly to all root request
Give phone a few min to settle open developer options set animation scales .05 and others to .05
@JUSMEJOSE for Eng Boot.img
Original Thread

jrkruse said:
Well its in early stages but here you go
Download Nougat Eng Boot.img Flash in odin
Download Adb Root method S7Root_Unroot_SR3_2_78.zip
Give phone a few min to settle open developer options set animation scales .05 and others to .05
Do it just like old root method was done
@JUSMEJOSE for Eng Boot.img
Original Thread
Click to expand...
Click to collapse
Will this have the same lag issues? Just curious

nitroevo said:
Will this have the same lag issues? Just curious
Click to expand...
Click to collapse
Eng root will always have some sort of lag doesnt matter what device it is even with the s6/note5/s6 edge+
These are not supposed to be for public usage as i stated on other thread they are used for technicians "me" give us adb root to unlock devices ...

JUSMEJOSE said:
Eng root will always have some sort of lag doesnt matter what device it is even with the s6/note5/s6 edge+
These are not supposed to be for public usage as i stated on other thread they are used for technicians "me" give us adb root to unlock devices ...
Click to expand...
Click to collapse
Ugh Ok :-/ hopefully there will be a more stable root later on. After all the fixes n all that still lagged

nitroevo said:
Ugh Ok :-/ hopefully there will be a more stable root later on. After all the fixes n all that still lagged
Click to expand...
Click to collapse
Its better than the MM eng kernel was The root bat fixes the cpu governors its really not that bad

Anyone have the stock boot IMG so we can root then go do our thing then unroot? Or could we just flash the BL in Odin and be unroot?
Sent from my SM-G935T using XDA-Developers Legacy app

Quickvic30 said:
Anyone have the stock boot IMG so we can root then go do our thing then unroot? Or could we just flash the BL in Odin and be unroot?
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
That doesnt work once the system has been mounted it fails dm check

jrkruse said:
That doesnt work once the system has been mounted it fails dm check
Click to expand...
Click to collapse
So to unroot we just flash your unroot package in the OP? Or would a guy just have to re-flash the stock firmware files?
Sent from my SM-G935T using XDA-Developers Legacy app

Quickvic30 said:
So to unroot we just flash your unroot package in the OP? Or would a guy just have to re-flash the stock firmware files?
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
If your wanting to run stock boot.img you would have to reflash full tar image

updated the Root file to Flash SuperSu 2.79 The latest official build

jrkruse said:
Its better than the MM eng kernel was The root bat fixes the cpu governors its really not that bad
Click to expand...
Click to collapse
well i remember doing the fixes with the cpu governor, doing sefix for entropy, doing tweaks with lspeed and it would still randomly lag quite a bit at times it made me give up

nitroevo said:
well i remember doing the fixes with the cpu governor, doing sefix for entropy, doing tweaks with lspeed and it would still randomly lag quite a bit at times it made me give up
Click to expand...
Click to collapse
Then dont do it

Do we have to flash the anything else after these files
---------- Post added at 01:34 PM ---------- Previous post was at 01:32 PM ----------
Will the same s7 fixes work

chuckboy1129 said:
Do we have to flash the anything else after these files
---------- Post added at 01:34 PM ---------- Previous post was at 01:32 PM ----------
Will the same s7 fixes work
Click to expand...
Click to collapse
The fixes are flashed when you flash the root file

jrkruse said:
The fixes are flashed when you flash the root file
Click to expand...
Click to collapse
How to remove volte symbol

Does this root method work with the Nougat beta2, the t-mobile ROM or both??

chuckboy1129 said:
How to remove volte symbol
Click to expand...
Click to collapse
Flash the zip with flashfire

ChadH42 said:
Does this root method work with the Nougat beta2, the t-mobile ROM or both??
Click to expand...
Click to collapse
Both

jrkruse said:
Both
Click to expand...
Click to collapse
Are you going to provide a fix for Samsung pay
Sent from my hero2qltetmo using XDA Labs
---------- Post added at 06:29 PM ---------- Previous post was at 06:01 PM ----------
Sorry last question when you root do you loose your data and vice versa when you unroot.
Sent from my hero2qltetmo using XDA Labs

Samsung pay will never work on a rooted device

MIUI V10.2.2.0 PDGMIXM stable - Global

available OTA
MIUI V10.2.2.0 PDGMIXM stable - Global
504 MB
update:
- SYSTEM
Fix: Updated Android Security Patch

dxdy said:
available OTA
MIUI V10.2.2.0 PDGMIXM stable - Global
504 MB
update:
- SYSTEM
Fix: Updated Android Security Patch
Click to expand...
Click to collapse
Security patch 2019-02-01

https://bigota.d.miui.com/V10.2.2.0.PDGMIXM/miui_MIMIX2SGlobal_V10.2.2.0.PDGMIXM_7bb6553bad_9.0.zip

very strange. I just got a new Mix 2S, it's still on MIUI 9, then I unlocked it with official tool, after unlocking (waited 72 hours), the stock rom also updated to MIUI 10. but it's the stock chinese version not global version. And I downloaded this Global version onto the root of phone's memory, follow twrp's official guide, and in the recovery I can't see the zip file. and can't flash it. everything under /sdcard are random folder with long name of string of letters. It's nothing like other phones I've flashed with TWRP.

zhourj said:
very strange. I just got a new Mix 2S, it's still on MIUI 9, then I unlocked it with official tool, after unlocking (waited 72 hours), the stock rom also updated to MIUI 10. but it's the stock chinese version not global version. And I downloaded this Global version onto the root of phone's memory, follow twrp's official guide, and in the recovery I can't see the zip file. and can't flash it. everything under /sdcard are random folder with long name of string of letters. It's nothing like other phones I've flashed with TWRP.
Click to expand...
Click to collapse
The random folder and file names indicate that TWRP did not manage to decrypt your phone. It is supposed to ask for your password when you enter recovery. A workaround is using adb from a pc and sideload the zip.

zhourj said:
very strange. I just got a new Mix 2S, it's still on MIUI 9, then I unlocked it with official tool, after unlocking (waited 72 hours), the stock rom also updated to MIUI 10. but it's the stock chinese version not global version. And I downloaded this Global version onto the root of phone's memory, follow twrp's official guide, and in the recovery I can't see the zip file. and can't flash it. everything under /sdcard are random folder with long name of string of letters. It's nothing like other phones I've flashed with TWRP.
Click to expand...
Click to collapse
It happen also to me just retry to download and you see you don't download the ota 540mb but the full 1.7gb then you can upgrade..

hocuspocus69 said:
It happen also to me just retry to download and you see you don't download the ota 540mb but the full 1.7gb then you can upgrade..
Click to expand...
Click to collapse
yes it is the 1.7GB zip
---------- Post added at 09:46 PM ---------- Previous post was at 09:44 PM ----------
M1chiel said:
The random folder and file names indicate that TWRP did not manage to decrypt your phone. It is supposed to ask for your password when you enter recovery. A workaround is using adb from a pc and sideload the zip.
Click to expand...
Click to collapse
Oh, I see. so how should I do that? I'm not familiar with the command line commands in fastboot.
I think I saw one post around here but didn't memorize it.
---------- Post added at 09:47 PM ---------- Previous post was at 09:46 PM ----------
M1chiel said:
The random folder and file names indicate that TWRP did not manage to decrypt your phone. It is supposed to ask for your password when you enter recovery. A workaround is using adb from a pc and sideload the zip.
Click to expand...
Click to collapse
Thank you very much. And is it possible that I can let TWRP decrypt the phone somehow? when should it ask for password? it's still a fresh system, I didn't set any password yet. Or is there a universal one?

zhourj said:
yes it is the 1.7GB zip
---------- Post added at 09:46 PM ---------- Previous post was at 09:44 PM ----------
Oh, I see. so how should I do that? I'm not familiar with the command line commands in fastboot.
I think I saw one post around here but didn't memorize it.
---------- Post added at 09:47 PM ---------- Previous post was at 09:46 PM ----------
Thank you very much. And is it possible that I can let TWRP decrypt the phone somehow? when should it ask for password? it's still a fresh system, I didn't set any password yet. Or is there a universal one?
Click to expand...
Click to collapse
If you haven't set a PIN or password your data are not supposed to be encrypted, but maybe MIUI has a different approach. I suppose you use the latest twrp from the twrp.me site? Older unofficial versions cannot decrypt. Maybe you can set PIN and see what happens if you reboot in twrp?
A good instruction on how to use sideload is on the LineageOS site: https://wiki.lineageos.org/devices/polaris/install

M1chiel said:
If you haven't set a PIN or password your data are not supposed to be encrypted, but maybe MIUI has a different approach. I suppose you use the latest twrp from the twrp.me site? Older unofficial versions cannot decrypt. Maybe you can set PIN and see what happens if you reboot in twrp?
A good instruction on how to use sideload is on the LineageOS site: https://wiki.lineageos.org/devices/polaris/install
Click to expand...
Click to collapse
Thank you very much.
I might try using Lineage actually. My nexus galaxy was on cyangen rom all the time.
this Mi phone is really difficult now. I tried to use MIUI's own flash tool with the global rom, but it didn't recognize the zip file. And after unzipping it, it didn't find any "flash all.bat". Is that really a problem for this rom?

zhourj said:
Thank you very much.
I might try using Lineage actually. My nexus galaxy was on cyangen rom all the time.
this Mi phone is really difficult now. I tried to use MIUI's own flash tool with the global rom, but it didn't recognize the zip file. And after unzipping it, it didn't find any "flash all.bat". Is that really a problem for this rom?
Click to expand...
Click to collapse
You have to look for a flashable version. I downloaded one from here: http://en.miui.com/a-234.html. If I remember correctly you have to unzip it twice. Make sure you do not use the bat file that relocks your bootloader.

M1chiel said:
You have to look for a flashable version. I downloaded one from here: http://en.miui.com/a-234.html. If I remember correctly you have to unzip it twice. Make sure you do not use the bat file that relocks your bootloader.
Click to expand...
Click to collapse
i didn't know there are different version of the bat files there.

I don't know why this unit can't be flashed with it. And also I want to use lineage OS rom, however that zip file can't be seen under TWRP recovery. still the same thing.
Even it's the latest version for this model, and I flashed the recovery onto the phone memory, it still can't work.
Have you encountered such problem before?
M1chiel said:
You have to look for a flashable version. I downloaded one from here: http://en.miui.com/a-234.html. If I remember correctly you have to unzip it twice. Make sure you do not use the bat file that relocks your bootloader.
Click to expand...
Click to collapse

zhourj said:
very strange. I just got a new Mix 2S, it's still on MIUI 9, then I unlocked it with official tool, after unlocking (waited 72 hours), the stock rom also updated to MIUI 10. but it's the stock chinese version not global version. And I downloaded this Global version onto the root of phone's memory, follow twrp's official guide, and in the recovery I can't see the zip file. and can't flash it. everything under /sdcard are random folder with long name of string of letters. It's nothing like other phones I've flashed with TWRP.
Click to expand...
Click to collapse
not needed to unlock device to flash (upgrade with) official global ROM
download http://en.miui.com/download-343.html and just copy zip file to downloaded_rom folder and run update

fps on video settings
subboxcb said:
Security patch 2019-02-01
Click to expand...
Click to collapse
i noticed the fps on video setting is now only in 30fps in previous updates i can still see the 60fps on 4k and 1080p, you guys noticed it too? and also adaptive battery has been added and my battery life have been so good after this update since 10.2.1, i hope they fix the video setting soon if im the only one experiencing this problem.

Hello, I come to ask for help, I have my mi mix 2s that offers me the update v10.2.2.0 PDGMIXM stable 1.7G the problem is once download with the phone it tells me impossible to check the source of the file and does not update I tried to download the rom from here: http://en.miui.com/download-343.html the problem is the same. do you have an idea of the solution?
I am currently with the rom MIUI GLOBAL STABLE 10.0.2.0 ODGMIFH
EDIT : solved

New updated 10.3.3.0 stable

miras65000 said:
New updated 10.3.3.0 stable
Click to expand...
Click to collapse
Where ? Link ?