I have twrp...I got update..but I can't flash with twrp. So need stock recoveryi.img file ..how to get ..h:eekelp me :crying:
my honor 9i rne l22 showing no os installed on device can anyone solve this
sushil1727828 said:
I have twrp...I got update..but I can't flash with twrp. So need stock recoveryi.img file ..how to get ..h:eekelp me :crying:
Click to expand...
Click to collapse
my honor 9i rne l22
is not working from 1 month i am very disturbed please help
Steps on how to flash the stock recovery on your RNE-L22/RNEL02 devices
sushil1727828 said:
I have twrp...I got update..but I can't flash with twrp. So need stock recoveryi.img file ..how to get ..h:eekelp me :crying:
Click to expand...
Click to collapse
Hi Sushi!
Here's the guide on how to flash the stock recovery for your devices.
Step 1. Download the Necessary files.
Stock Rom For RNE-L02 - ASIA
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2722/g1699/v170811/f1/full/update.zip
Stock Rom for RNE-L22 - ASIA
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2722/g1699/v170811/f1/full/update.zip
Huawei Update Extractor Tool
https://openkirin.net/user_guide/how-to-extract-partition-images-from-stock-emui-firmware/
ADB Tools - There's a tutorial on the link on how to install
https://forum.xda-developers.com/showthread.php?t=2588979
Step 2. Extracting the stock recovery (recovery.img) to a stock ROM.
1. Unzip the update.zip to any folder on your desktop. Then Run the huawei update extractor tool with administrator privileges.
2. Go to settings tab and uncheck the Verify header checksum.
3. go back to extract tab and locate the button with ".." on it. It is the find target button, just click it.
4. Now locate the folder where you have unzip the update.zip and choose the UPDATE.APP, then click open. It should show the files inside the update.app.
5. Look for the RECOVERY_RAMDIS.img or sometimes it is named as RECOVERY.IMG - That's what your are looking for!! :good:
6. Select that RECOVERY_RAMDIS.img or RECOVERY.IMG and press right-click then click "extract selected". Extract it on any folder on your desktop. IT will load but the windows won't close so you would press the close button on the "extracting files..." window.
7. Now we have what you are looking for, the stock recovery!!! Let's get to Step 3.
Step 3. Flashing the stock recovery on your phone.
1. Install the ADB Tools. It will open a command prompt window just press Y three times.
2. Go back to the folder where you have put the recovery. Press SHIFT KEY and Right-click anywhere on the folder then click 'Open Command Windows Here" or Open Powershell command here"
3. On your phone, you should have enabled the USB debugging and Allow ADB debugging mode in charge only mode.
4. On the terminal (Powershell or CMD) type "adb devices" without this --> ". After that you should see your devices build number on the list. IF not try to revoke the adb previleges on your device.
5. Now type "adb reboot bootloader". Your device should be rebooting to bootloader.
6. Type "fastboot flash recovery_ramdisk RECOVERY_RAMDIS.img. Note that if you have already renamed the stock recovery file then rename the RECOVERY_RAMDIS.img too.
7. It should show on the terminal " OK" and there you have it!! YOU HAVE SUCCESSFULLY flashed the stock recovery.
8. Now type "adb reboot recovery" to test if your custome recovery has been replaced with the stock recovery. CHEERS! :good::highfive:
I really hope this will help you guys! If you have any concern just email me!:good: [email protected]
Related
Guys I'm on global Miui 8 Global 6.7.5 beta. I tried to root and install twrp using mi4i rooting toolkit version 4. But it doesn't work. Previously on miui6 and miui7, I can root and install twrp using the mi4i toolkitV4. But now it doesn't work anymore when I upgraded to miui8.
Does anyone knows how to root miui8 global 6.7.5 beta?
Rooting
First you have to enable developer options. Then in developer options under debugging section turn on USB debugging and Fastboot Mode.
Then download TWRP. Rename it to twrp.img for ease.
https://dl.twrp.me/ferrari/twrp-3.0.2-0-ferrari.img.html
Install fastboot and adb drivers.
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Download root zip file, and place it on internal storage.
https://download.chainfire.eu/696/supersu/
Open the folder on PC where twrp image is downloaded. Hold shift and right click on the window(not the file or folder). Then select open command window here. CMD will open.
Long press power button and volume down to boot into fastboot mode, connect it by USB.
Type in CMD: fastboot devices
If it shows a device is connected you are good to go! If not verify if the drivers are properly installed.
To just root and preserve Mi Recovery for OTA:
Type in CMD: fastboot boot twrp.img
this will boot into twrp to flash supersu.zip file and reboot.
To flash TWRP permanently:
type: fastboot flash recovery twrp.img
then reboot by long pressing power button then open TWRP by power button + vol up. Then flash supersu.zip
Thanks
Sent from my Mi 4i using XDA-Developers mobile app
Worked?
Did it work?
Sitaa said:
Did it work?
Click to expand...
Click to collapse
Yape!
Thanks for the article - will update and root tonight
The process:
update via OTA (hate this as my 16GB is insufficient - love all things M1 but hate the lack of external SD capability)
Reboots - it enters my old TWRP, and auto install update
Once it installs, and auto powerup, I turn on "fastboot mode" (developer option was already on) - a pain in the a55 due to the security prompt...
Power-off the device. Reboot to fastboot mode as per instruction above
I chose to retain M1 recovery, and so fastboot into TWRP to install SU.
Reboot
Tested with titanium backup - root works!
Thanks!!!
Love the new notification drawer, and memory management...
can i root my mi4i without instal twrp and still habe ota update if my phone rooted ?
thanks
Yes.
The OP posted 2 methods for using twrp near the end of his post.
For v7++, I could always ota despite having twrp onboard, instead of mi recovery. Not sure about this recent v8. Hence I used the first method above, preserving my recovery. Also, from my history of use. I never use twrp or recovery anymore, after rooting. No point having recovery backup as mi issues updates ofyen. I use titanium for backup of third party software only. Even then this is redundant since ota preserves software.
sharan.nyn said:
First you have to enable developer options. Then in developer options under debugging section turn on USB debugging and Fastboot Mode.
Then download TWRP. Rename it to twrp.img for ease.
https://dl.twrp.me/ferrari/twrp-3.0.2-0-ferrari.img.html
Install fastboot and adb drivers.
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Download root zip file, and place it on internal storage.
https://download.chainfire.eu/696/supersu/
Open the folder on PC where twrp image is downloaded. Hold shift and right click on the window(not the file or folder). Then select open command window here. CMD will open.
Long press power button and volume down to boot into fastboot mode, connect it by USB.
Type in CMD: fastboot devices
If it shows a device is connected you are good to go! If not verify if the drivers are properly installed.
To just root and preserve Mi Recovery for OTA:
Type in CMD: fastboot boot twrp.img
this will boot into twrp to flash supersu.zip file and reboot.
To flash TWRP permanently:
type: fastboot flash recovery twrp.img
then reboot by long pressing power button then open TWRP by power button + vol up. Then flash supersu.zip
Click to expand...
Click to collapse
i followed the procedure, but it shows fastboot boot twrp.img can not be found
vijayk12 said:
i followed the procedure, but it shows fastboot boot twrp.img can not be found
Click to expand...
Click to collapse
Are you sure you installed ADB Fastboot drivers? and make sure you 'cd' to the directory where twrp.img is located or else it will say the file is not found.
You need to put the both fastboot and image files together in the same directory. Then open a MS prompt in this directory, and type the syntax to flash.
twrp not found??
sharan.nyn said:
Are you sure you installed ADB Fastboot drivers? and make sure you 'cd' to the directory where twrp.img is located or else it will say the file is not found.
Click to expand...
Click to collapse
twrp.img not found. now i have installed the adb drivers and verified as well by the "fastboot devices" command. now when i go to the this "fastboot devices twrp.img" command it says twrp not found. what to do?
Found the solution
monishalria said:
twrp.img not found. now i have installed the adb drivers and verified as well by the "fastboot devices" command. now when i go to the this "fastboot devices twrp.img" command it says twrp not found. what to do?
Click to expand...
Click to collapse
Rename the TWRP downloaded file to 'twrp' not 'twrp.img' as mention. and in command write ' fastboot boot twrp.img' as the downloaded file is already img i did it and worked for me.
Hi,
I manage to flash TWRP (i.e. sending recover =OKAY & writing recovery= OKAY).
Yet I could not manage to reboot by long pressing power button then open TWRP by power button + vol up.
Someone can help me?
Thank you in advance
sharan.nyn said:
First you have to enable developer options. Then in developer options under debugging section turn on USB debugging and Fastboot Mode.
Then download TWRP. Rename it to twrp.img for ease.
https://dl.twrp.me/ferrari/twrp-3.0.2-0-ferrari.img.html
Install fastboot and adb drivers.
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Download root zip file, and place it on internal storage.
https://download.chainfire.eu/696/supersu/
Open the folder on PC where twrp image is downloaded. Hold shift and right click on the window(not the file or folder). Then select open command window here. CMD will open.
Long press power button and volume down to boot into fastboot mode, connect it by USB.
Type in CMD: fastboot devices
If it shows a device is connected you are good to go! If not verify if the drivers are properly installed.
To just root and preserve Mi Recovery for OTA:
Type in CMD: fastboot boot twrp.img
this will boot into twrp to flash supersu.zip file and reboot.
To flash TWRP permanently:
type: fastboot flash recovery twrp.img
then reboot by long pressing power button then open TWRP by power button + vol up. Then flash supersu.zip
Click to expand...
Click to collapse
Ia these steps can root my mi4i miui 8.0.1.0 global stable too?
farid0019 said:
Ia these steps can root my mi4i miui 8.0.1.0 global stable too?
Click to expand...
Click to collapse
Yeah of course it will work
same problem twrp.img
sharan.nyn said:
Are you sure you installed ADB Fastboot drivers? and make sure you 'cd' to the directory where twrp.img is located or else it will say the file is not found.
Click to expand...
Click to collapse
hey im facing the same problem that no such file or directory. U said cd to the directory. how do you do it. Please can u be specific. i dont know how to do it
zaid siddique said:
hey im facing the same problem that no such file or directory. U said cd to the directory. how do you do it. Please can u be specific. i dont know how to do it
Click to expand...
Click to collapse
https://www.google.co.in/amp/m.wikihow.com/Change-Directories-in-Command-Prompt?amp=1
Use this guide.
Tks for this great Rooting guid and twrp install on my mi4 \w/
TWRP 3.0.2 for Acer Predator 8 ported by Ruben. - If you like my work please donate here, it will also give me a boost to make more things for this device : https://www.paypal.me/RubenCraveiro
----------- -----------
IMPORTANT NOTE ABOUT ROOTING AND UNLOCKING BOOTLOADER:
After flashing TWRP 3.0.2, use the SuperSU 2.46 flashable zip, do NOT use latest version or will result in a bootloop. Good Luck and have fun with rooting. Unlocking bootloader will delete all your data, so please make a backup first. Thank you.
----------- -----------
CREDITS
And also, before anything i would like to say thanks to @arjaylzo for telling me the name of a device with TWRP which helped making this update possible.
REQUIREMENTS
1- Fastboot/ADB Drivers and ADB folder
For drivers: http://adbdriver.com - Download ADB Driver Installer (universal) from the website, extract it, connect device it should detect device(if not, enable USB Debugging and reconnect), and press install, it should install drivers.
For ADB Folder: download this and extract to your main drive(C:/): https://goo.gl/ZTrfBb
2- Unlocked Bootloader (you need requirement 1 to do this)
Instructions for Unlocking bootloader: Go on settings, about device, press build version several times till it says your a developer, go back to settings, press Developer Options, and enable OEM Unlocking. Power off, then press at same time Power and Vol+ button, then connect to pc and open a cmd and write cd c:\\adb and write fastboot oem unlock, then accept the prompt it will give on tablet, and follow the rest of the steps.
----------- -----------
New TWRP bugfix update! Now you can flash stock rom on TWRP without bricking! Download Page updated!
----------- -----------
BUGS:
1- adb shell command needs to be sent before system partition is mounted or it will give an error, after doing adb shell you can mount system and do all the modifications you need.
2- You cant flash any img on twrp it gives an error, im trying to fix.
3- Backups do work, but everytime twrp restarts, the device name seems to change (which means that on /TWRP/BACKUPS/devicename/backupsinside/ changes every reboot so you have to go get the backup inside the old devicename folder and put on the new devicename folder).
----------- ADITIONAL NOTES -----------
Im leaving an unsecured boot image because system seems not want to boot android if anything seems changed. So please if system does not boot after flashing twrp/rooting, flash the unsecured boot img on fastboot
----------- -----------
Steps TO INSTALL TWRP AND ROOT
1. Download and extract the files: https://drive.google.com/file/d/0BxzG5iupOOSKNTdlRC1Wd0VmTlk/view?usp=drivesdk
2. Power off the tablet.
3. Enter fastboot mode by pressing the power button while holding down Vol -
4. Open up command prompt and navigate to the directory where fastboot.exe is located.
5. Pass the following commands:
fastboot flash boot unsecuredboot.img
fastboot flash recovery TWRP.img
6. Reboot into recovery (TWRP) and install SuperSU v2.46.zip
----------- -----------
Acer Predator 8 Support website(sourcecode, manuals, drivers, stockrom):
http://www.acer.com/ac/en/US/content/support-product/6400?b=1
----------- -----------
SCREENSHOTS:
http://imgur.com/s7CgJPR
I stuck at step 4.
is this the directory where fastboot.exe is located -> C:\adb... I have 4 files there and 1 of them is named fastboot.
Also the files i downloaded and extracted from step 1 , do i need to put them in my device or they need to stay on my pc.
goleoldark said:
I stuck at step 4.
is this the directory where fastboot.exe is located -> C:\adb... I have 4 files there and 1 of them is named fastboot.
Also the files i downloaded and extracted from step 1 , do i need to put them in my device or they need to stay on my pc.
Click to expand...
Click to collapse
C:\adb is where my adb and fastboot commands are.. on the downloaded files from Step 1 only the SuperSU zip is needed on the tablet so that you can flash it later on with twrp, the rest you leave on pc and use fastboot to flash TWRP, unsecured boot image, etc...
Ruben Craveiro said:
C:\adb is where my adb and fastboot commands are.. on the downloaded files from Step 1 only the SuperSU zip is needed on the tablet so that you can flash it later on with twrp, the rest you leave on pc and use fastboot to flash TWRP, unsecured boot image, etc...
Click to expand...
Click to collapse
Ok so in "C:\adb" i put all files i downloaded from step 1 then I opened cmd in that folder , then i typed "fastboot flash boot unsecboot.img" and it said that i cant load or open unsecboot.img
Any idea why or where is my mistake ????
goleoldark said:
Ok so in "C:\adb" i put all files i downloaded from step 1 then I opened cmd in that folder , then i typed "fastboot flash boot unsecboot.img" and it said that i cant load or open unsecboot.img
Any idea why or where is my mistake ????
Click to expand...
Click to collapse
make sure you didnt put a folder inside the adb folder instead of the actual file and make sure your writing the right name of the file..
goleoldark said:
Ok so in "C:\adb" i put all files i downloaded from step 1 then I opened cmd in that folder , then i typed "fastboot flash boot unsecboot.img" and it said that i cant load or open unsecboot.img
Any idea why or where is my mistake ????
Click to expand...
Click to collapse
also its not unsecboot, the name i added on this thread was just so it would be faster, the name is unsecuredboot.img and not unsecboot.img i guess ill have to edit that in order for people following the tutorial by line dont make these mistakes..
how do i flash the stock rom came from Acer Predator 8 Product Support Page.
can i just flash this Android 5.1 Lollipop Image via TWRP???
TIA
xdadevelopers13 said:
how do i flash the stock rom came from Acer Predator 8 Product Support Page.
can i just flash this Android 5.1 Lollipop Image via TWRP???
TIA
Click to expand...
Click to collapse
yes
thanks. will i have to flash the stockboot.img and P8AcerRecovery.img via fastboot?
tried flashing the stock rom via TWRP but to no avail.
still cant pass the boot logo
xdadevelopers13 said:
thanks. will i have to flash the stockboot.img and P8AcerRecovery.img via fastboot?
tried flashing the stock rom via TWRP but to no avail.
still cant pass the boot logo
Click to expand...
Click to collapse
If you flash stock rom, i think you have to reinstall stock recovery, the rom itself already brings stock boot.. after flashing stock recovery it should boot since no modifications have happend
Wow good job! Now i have a recovery where i can flash my custom rom for the Predator 8.
p8tgames said:
Wow good job! Now i have a recovery where i can flash my custom rom for the Predator 8.
Click to expand...
Click to collapse
no custom roms yet
How to enter the command ?
Hi i am not so sure how to execute those info in my head and act on it so can anyone teach me ? how to root my Predator 8 GT-810 Android 5.1
i saw the instruction i dk how do i Unlock Bootloader (Fastboot) i search all over google and i dont really got the solution to the question so anyone can teach me ? and "4. Open up command prompt and navigate to the directory where fastboot.exe is located." do i extract the whole file i downloaded into my Acer predator 8 or ?... im stupid sorry ...
ZaineJJ said:
Hi i am not so sure how to execute those info in my head and act on it so can anyone teach me ? how to root my Predator 8 GT-810 Android 5.1
i saw the instruction i dk how do i Unlock Bootloader (Fastboot) i search all over google and i dont really got the solution to the question so anyone can teach me ? and "4. Open up command prompt and navigate to the directory where fastboot.exe is located." do i extract the whole file i downloaded into my Acer predator 8 or ?... im stupid sorry ...
Click to expand...
Click to collapse
On step 4 You need the fastboot files, (adb & fastboot) just search how to install adb and fastboot drivers, choose the directory where to install them and place the needed files inside that folder and open a command prompt on that folder so you can flash the files.
Ruben Craveiro said:
On step 4 You need the fastboot files, (adb & fastboot) just search how to install adb and fastboot drivers, choose the directory where to install them and place the needed files inside that folder and open a command prompt on that folder so you can flash the files.
Click to expand...
Click to collapse
ir I tried finding how to install fastboot driver on Google all showed me downloads links must do survey or download or purchase item to unlock the download files ... So I don't trust it so I kept searching "how to unlock fastboot Acer predator 8"
So for ADB I can search on Google and install it on my tablet ?
ZaineJJ said:
ir I tried finding how to install fastboot driver on Google all showed me downloads links must do survey or download or purchase item to unlock the download files ... So I don't trust it so I kept searching "how to unlock fastboot Acer predator 8"
So for ADB I can search on Google and install it on my tablet ?
Click to expand...
Click to collapse
no, Search how to unlock bootloader, it should show the method that works for most devices and give necessary drivers..
Ruben Craveiro said:
no, Search how to unlock bootloader, it should show the method that works for most devices and give necessary drivers..
Click to expand...
Click to collapse
http://gsmusbdriver.com/acer-predator-8
Does this work ?
Or
https://www.howtogeek.com/239798/how-to-unlock-your-android-phones-bootloader-the-official-way/
ZaineJJ said:
http://gsmusbdriver.com/acer-predator-8
Does this work ?
Or
https://www.howtogeek.com/239798/how-to-unlock-your-android-phones-bootloader-the-official-way/
Click to expand...
Click to collapse
Yes, and after you unlock the bootloader, you put the necessary files in adb folder and flash them according to the stepts
Ruben Craveiro said:
C:\adb is where my adb and fastboot commands are.. on the downloaded files from Step 1 only the SuperSU zip is needed on the tablet so that you can flash it later on with twrp, the rest you leave on pc and use fastboot to flash TWRP, unsecured boot image, etc...
Click to expand...
Click to collapse
Hi Ruben Craveiro is this the correct way ? i plugin usb cable into Predator 8 but it says its waiting for device is it the correct way ? after typing those Commands i go over to recovery mode to install SU from there then restart and its rooted ?
ZaineJJ said:
Hi Ruben Craveiro is this the correct way ? i plugin usb cable into Predator 8 but it says its waiting for device is it the correct way ? after typing those Commands i go over to recovery mode to install SU from there then restart and its rooted ?
Click to expand...
Click to collapse
That means adb drivers arent corrently installed, but i can see you have the folder with adb, all you have to now is download this(drivers): http://dl.adbdriver.com/upload/adbdriver.zip
Extract and open the software eith the tablet plugged in, it should tell of drivers is installer properly or not, and if not you can install, after installing it should work on the cmd the commands..
Hi Everyone
I will show you how to unlock bootloader, install TWRP and ROOT on
ASUS Zenfone 3 Max 5.5 ZC553KL (X00D).
Before you remember to backup data carefully.
All needed files will be in this folder:
Please edit all the link to be form of google shorterner
goo. gl/xCAUAB
1. We downloaded two driver compression files on:
Adb: goo. gl/SBVPVG
Intel Android Driver: goo. gl/oYN7mG
2.Download this file:
goo. gl/5yA6yp
3. After you download all the necessary files, you unzip them all and start installing.
Run file adb-setup-1.4.2.exe to setup adb
Adb is now installed Intel Android Driver next next time as usual.
That is the driver. Now copy the two files (frp.BIN and twrp-3.1.1-0-X00D-20171020-5.img) into the C: \ adb folder.
4. Brother downloaded this file supersu and then copy to phone memory card.
goo. gl/jLmknM
5. Now start using adb to flashboot
After copying, we go to PowerShell (Admin) if using windows 10
You guys use win7 and 8 then run cmd with admin rights.
After open brother type the following commands in turn order:
cd C: \ adbadb reboot bootloader
The command to enter the bootloader, wait for the machine and then reset then type.
fastboot flash config frp.bin
Waitt for the copy to complete the command to reset.
fastboot reboot-bootloader
After resetting, type the following command:
fastboot oem unlock-go
Once done, type in the following command:
fastboot reboot
After the reboot finishes the power off.
Then press the volume key + before pressing the power button, wait for the screen, then release the power button to keep the volume + key to bootloader.
Please enter the order fastboot flash recovery
twrp-3.1.1-0-X00D-20171020-5.img
Wait for the file to finish typing the command below to enter the TWRP
fastboot oem reboot-recovery
After entering the TWRP, the brothers swipe the left "Swipe modified system".
Next select Install -> Select Storage under -> Micro SDCard -> OK
Youu will see the file SuperSU-V2.82.zip you just copied to the memory card.
Click on this file -> Swipe to Right Swipe to confirm Flash Finished, now sit back to finish running and reset the machine.
So is root finished.
Wishing you success.
LOL? You made this method yourself? I saw this in somewhere on this forum.
https://forum.xda-developers.com/zenfone-3/how-to/zenfone-3-max-zc553kl-bootloader-unlock-t3691837
After installing twrp recovery. Will my phone resets its phone data?
hello, i try to unlock bootloader and in adb when i type: fastboot flash config frp.bin it say error: cannot load 'frp.bin' : no such file or directory but 'frp.bin is in the same folder of adb i don't understand why it do this error i'm in fastboot mode i tryed de reboot my pc but it do the same error can you help me please thanks a lot!!
Does this method work on zenfone 3 max zc553kl with android 7.1.1? Thank you
is this tut is working for 7.1.1 version?
Revert to stock
How i can remove TWRP e revert to stock recovery ?
ZC553KL
hello its been a while is it available for Android 8.1?
Hello, I could not download the files. Could you please submit a new link? Thank you very much in advance.
Hi . ppl. The noob question. So i just rooted my device and now i need to install recovery menu? Everybody says on internet that i should get recovery app by gnufobio, but the problem is thats its impossible to find it? is there any other way to install clockwork or twrp??
1. Download Adb and fastboot tools(platform-tools) by google in PC.
2. Download TWRP recovery
3. Switch off the phone and press power and volume up key together. Phone will be boot in fastboot mode.
4. Connect phone with PC
5. Move TWRP in se folder of ADB tools
6. Hold shift and press right click in ADB folder in PC.
7. A new option window open search for "Open Command prompt here" or "Open Powershell Here" and click on which is available.
8. Write this command "fastboot flash recovery <recoveryfilename>.img
If open powershell window than this command ".\fastboot flash recovery <recoveryfilename>.img"
Recovery file name is copied or same name of TWRP file name by which it is saved in your PC.
Hi this is my first post on XDAdevelopers and I would like to share my success on making this possible by helping everyone who has the same problem as mine. I hope this helps
Things you will need:
*Huawei Mate9
* a Windows PC
*Huawei Mate9 stock firmware
*Huawei Firmware Extractor (credits to worstenbrood for the download link)
*adb tools
How to uninstall TWRP (Huawei Mate 9)
1. go to settings > about phone
2. know your device model
3. open your browser and go to https://romfirmware.com/stock-rom/huawei/huawei-mate-9-mha-l29/ and find your device's model then press download
4. download huawei firmware extractor from https://forum.xda-developers.com/showthread.php?t=2433454
5. extract the update.zip using your extracting tool
6. using your PC download adb tools as well
7. open huawei firmware extractor then locate your extracted update file
8. select the recovery.img then choose the same directory of the downloaded adb tools
9. on any space inside the adb tools directory press shift + right click to create a command prompt in it
10. reboot phone to fast boot
11. on the command prompt type in "adb devices" without the quotation marks
12. if the entered command detects your device, type in "fastboot flash recovery recovery.img"
13. if success type in "fastboot reboot"
that should successfully install your device stock recovery and removing TWRP in the process