Possible to disable Band 4 on unrooted Verizon Pixel? - Google Pixel Questions & Answers

Recently I've started to experience exponential increase in dropped signal/phone rebooting/radio cycling on/off. It looks like my home is at the edge of verizon's band 4 coverage. They must have switched on or changed tower config over the past couple months, as that's when it started.
Essentially, my pixel is trying to connect to band 4, which is around -105 to -115 dBm. As a result, signal drops frequently. It'll connect to band 13 sometimes, which is great at -85 to -95 dBm. The thing is, seems like band 4 has priority, as the phone constantly drops the more stable band 13 connection in search of band 4.
Speedtest shows no benefit to me the enduser, as I am getting around 100/18 connection on both band 4 and 13. It's gotten to the point where this would happen every couple minutes, making the phone unusable.
Staying on wifi solves the data issue, but that's not ideal. And I still see the radio cycling on/off trying to search for signal even on wifi, which means I could potentially lose calls and texts.
Any suggestions on how to temp disable band 4, or at least prioritize band 13 over it? Thanks!

Related

Weak Wifi reception

A few users reported weak WiFi signal strength on N5. Good WiFi signal strength is very important for me and this is one of things I like on my current SGS, so Im wondering how good is Wlan strength on yours N5 ?
Also Androidizen posted video about WiFi problem:
I received my N5 yesterday and i am facing this weak WiFi signal problem.
I compared it with my Iphone 5.
i was 8 feet away having my back to router, iphone 5 showed full strength signals while N5 showed 3/4 signal strength.
Ive had my nexus 5 for a few days now, and the main thing that is annoying me is the wifi, the signal is so flaky one minute im on full bars, next minute its on 1 or 2, then back to full. this can be in line of sight with the router. Ive tried a few routers at home and at work, same issue. I have tried an iphone, nokia and samsung and they all have a much better range. I'm contemplating taking this back now and getting a refund, as i don't think its acceptable. does anyone else get this constant fluctuation?
I have also noticed when you put your hand over the top of the phone the signal can drop completely. Not taht i do this, but other phones i have do not suffer with this.
i take it not many people are seeing this issue, are others with the phone able to check the wifi range and fluctuations in comparison with other devices. How can it go from full bars to 2, then back to full constantly when other phones are solid. Trying to work out if its worth exchanging for another. Speeds just change from say 72mbs to like 19mbs non stop. Thanks
Side by side with my Nexus 4 I'm getting the same strength and speed.
Sent from my Nexus 5 using Tapatalk 2
mintume said:
I received my N5 yesterday and i am facing this weak WiFi signal problem.
I compared it with my Iphone 5.
i was 8 feet away having my back to router, iphone 5 showed full strength signals while N5 showed 3/4 signal strength.
Click to expand...
Click to collapse
Do not use the bars when comparing signal.
Download an app that shows you the actual signal level in dbm. Bars can be set to whatever the developer wants. I could make you have full bars at -110 dbm which would be a useless connection, but still show full bars. For the most part, you should disregard them.
Would be possible to boost WiFi reception with a software tweak? Even if Google doesnt provide a fix, could be WiFi signal strength increased in custom roms? I hope some developer will know to answer this.
I have chance to get N5 32gb next week and I really want it, but since Im a lot in other countries, good WiFi signal strength is very important for me (to connect on WiFi hotspots)
Thanx
Is it an issue of signal strength only? Does it ever disconnect you completely? "Strength" would be much less of a concern than disconnects, now THAT would be annoying.
Spitfire said:
Is it an issue of signal strength only? Does it ever disconnect you completely? "Strength" would be much less of a concern than disconnects, now THAT would be annoying.
Click to expand...
Click to collapse
I have read that some N5 owners lost WiFi connection when they were about 10 m away from router. This is unacceptable IMO. I hope software tweak can boost WiFi reception.
I confirm the weak wifi too.
signal
i have nexus 5 16gb white, signal is very very weak!!! i have N4 and GN and have perfect signal!
the problem of weak wifi, is all about the nexus? we have to wait for a fix or should call google and give it back?
I'm facing the same issue. I'm few feets from AP and I'm getting weak and unstable signal. The worse thing is that it is not picking up signal from my main AP (Edimax) at home... It does not "see" the network at all even all other devices at home use it fine.
Very weak signal with this phone, I got full bars on my previous phones in my office but now only 2 bars. If you put your hand near the top of the phone the signal completely drops.
Same issue here, very weak reception. No issues with may tablet or laptops, but Nexus isnt getting good signal. White 32GB.
Yup weak signal. Initially it didn't want to connect to 3g but that was fixed with the service menu. And now I am noticing weak WiFi signal.
I'm guessing this has to do with the antenna.
Its easy to open the phone I'm going to crack it open and see what I find.
Have you folks tried going into your N5's WiFi settings & look under the Advanced submen (press the 3 dots on the lower right of screen)
Tried turning off 5 Ghz band if your router is on the typical 2.4 Ghz band - and if you have the newer dual band N router, enable your 5 Ghz band - could be interferences from other nearby devices or AP ??
Install the free app, Wifi Analayzer from Play Store & run it - take a look at your AP's signal strength, try switching to a less congested channel since the airwaves are shared, regardless which of the 11 channels you are defaulting to ...
Mine is running just fine, -60 to -50 dBm with the N home router behind 2 sheetrock walls.
Compared to my Galaxy Nexus and Galaxy SIII, I have superior Wifi Signal on my Nexus 5 to a very positive surprise...however network drop outs for Cellular connection is quite annoying...
guys try to disable the wifi optimization under advanced wifi setting and set the band to 2.4 . it worked with me :good:
I have to use my 2.4GHz connection because the phone didn't work at all on the 5GHz.
Sent from my Nexus 5
I have this problem too. Sometimes my signal is so weak that it disconnects with the router and falls back on 3G.
I tried everything. Just went into Safe Mode, but Wifi is still weak, it doesnt matter.
I tried to only use 2,4GHz and turned Wifi optimalisation off. Still the same weak signal.
I tested it with the app "Wifi Analyzer" If I stand next to the router it gets about -50dBm. Then I tested it with my brothers Galaxy S2, he got -40dBm. Thats a difference of 10dBm. -40dBm is a stronger signal.
We tried it at the 2nd floor, and he got a better signal again. So it's obviously my Nexus.
Android 4.4.2, stock, no root or something. Google come with a solution please. My previous phone had the same ****ty Wifi (HTC One X).

Call Quality and Signal Reception

I live less than 3 miles from Center city Philadelphia and I get terrible cell reception. My radio goes nuts constantly trying to keep a stable radio signal. It jumps from H to H+ to LTE constantly. I can stand in one place and watch it jump around all day. If I force LTE, LTE just drops out constantly. What is going on?
I have a few friends who all use the same carrier(T-Mobile) with different phones and don't report the same issue. I even have a buddy using a Gnex and he gets better reception than I do. Call quality is not very good either. I was making a call while walking home from class and had the other persons voice drop in and out when the wind started to blow. I dont believe that Wind was effecting my call. That makes no sense, but there was a correlation that went on for 20 minutes.
Anyone else having call quality/ signal strength issues? I am not talking about your data speeds, we have a thread for that. I am talking about tower connectivity and stability .
I don't use my phone for calling, but I'm trying out T-mobile in Janesville and Beloit Wisconsin and I notice that my signal bounces between GPRS, EDGE, 3g and H constantly as well. I have no other phone on T-Mobile to compare to though. Granted all signals have 1-2 bars in most places.
Use the app Sensorly to see what other users are reporting for signal coverage.

Nexus 5 poor signal strength on Ting...

Hello,
I have been seeing horrible quality of network service in my area on Ting. I have a white 32GB Nexus 5. I work in a three story building that seems to turn my phone into Digital roaming/CDMA 1xRTT network only going outside I barely get 3G. I have mapped it out and see more service in the area where people on Sprint are getting 4G LTE in the area or WIMAX. I was wondering if anyone on Ting/Sprint has the same issue.
I do see 3G on my commute and downtown Sacramento, California where I should see 4G LTE I am barely getting 3G 2 to 3 bars. Most of my day at work in Folsom, California area is all 1xRTT 2G or Roaming when inside my office, and lower end 3G outside. I have two 3G/WIMAX towers next to my area at work in Folsom and I should be getting some 3G.
I went through the cell network code to enable band 26, and band 41 and changed priorities on the band from 1 to 0 and individually tested each band in my area. band 41 seems to be the best and the others are pretty bad. Band 41 gets me -100 dBm, 99asu, 950ms ping on CDMA 1xRTT.
I now have it back to all priority 1 (Bands: 25/26/41) Band 26 and 41 enabled. I have updated my Profile and PRL multiple times.
I am running 4.4.2 with Xposed Framework version 1.5, with Franco kernel r33. I did see Franco kernel r34 and will probably flash the update ASAP to see if it works any better. I am not using any power save settings for cell network quality. I am also using a Spiegen slim-armor case and tried to see if it was interfering with signal strength, it wasn't.
So my question comes down to has anybody known a fix for getting solid 3G in an area where I should be seeing some LTE and atleast full strength 3G. I am barely seeing 2G most of the time. I am just crossing my finger it isn't an antenna issue with the phone itself.
Any help, tips, or tricks would be greatly appreciated!!!
adramalech707 said:
Hello,
I have been seeing horrible quality of network service in my area on Ting. I have a white 32GB Nexus 5. I work in a three story building that seems to turn my phone into Digital roaming/CDMA 1xRTT network only going outside I barely get 3G. I have mapped it out and see more service in the area where people on Sprint are getting 4G LTE in the area or WIMAX. I was wondering if anyone on Ting/Sprint has the same issue.
I do see 3G on my commute and downtown Sacramento, California where I should see 4G LTE I am barely getting 3G 2 to 3 bars. Most of my day at work in Folsom, California area is all 1xRTT 2G or Roaming when inside my office, and lower end 3G outside. I have two 3G/WIMAX towers next to my area at work in Folsom and I should be getting some 3G.
I went through the cell network code to enable band 26, and band 41 and changed priorities on the band from 1 to 0 and individually tested each band in my area. band 41 seems to be the best and the others are pretty bad. Band 41 gets me -100 dBm, 99asu, 950ms ping on CDMA 1xRTT.
I now have it back to all priority 1 (Bands: 25/26/41) Band 26 and 41 enabled. I have updated my Profile and PRL multiple times.
I am running 4.4.2 with Xposed Framework version 1.5, with Franco kernel r33. I did see Franco kernel r34 and will probably flash the update ASAP to see if it works any better. I am not using any power save settings for cell network quality. I am also using a Spiegen slim-armor case and tried to see if it was interfering with signal strength, it wasn't.
So my question comes down to has anybody known a fix for getting solid 3G in an area where I should be seeing some LTE and atleast full strength 3G. I am barely seeing 2G most of the time. I am just crossing my finger it isn't an antenna issue with the phone itself.
Any help, tips, or tricks would be greatly appreciated!!!
Click to expand...
Click to collapse
Go to about phone and check your Baseband version, if your modem driver is older you may want to upgrade it. Or if it is newer, potentially a downgrade has shown better performance as well. All depends.
Read this thread thoroughly and make sure you do a backup before doing anything and see if this helps.
http://forum.xda-developers.com/showthread.php?t=2514095
adramalech707 said:
Hello,
I have been seeing horrible quality of network service in my area on Ting. I have a white 32GB Nexus 5. I work in a three story building that seems to turn my phone into Digital roaming/CDMA 1xRTT network only going outside I barely get 3G. I have mapped it out and see more service in the area where people on Sprint are getting 4G LTE in the area or WIMAX. I was wondering if anyone on Ting/Sprint has the same issue.
I do see 3G on my commute and downtown Sacramento, California where I should see 4G LTE I am barely getting 3G 2 to 3 bars. Most of my day at work in Folsom, California area is all 1xRTT 2G or Roaming when inside my office, and lower end 3G outside. I have two 3G/WIMAX towers next to my area at work in Folsom and I should be getting some 3G.
I went through the cell network code to enable band 26, and band 41 and changed priorities on the band from 1 to 0 and individually tested each band in my area. band 41 seems to be the best and the others are pretty bad. Band 41 gets me -100 dBm, 99asu, 950ms ping on CDMA 1xRTT.
I now have it back to all priority 1 (Bands: 25/26/41) Band 26 and 41 enabled. I have updated my Profile and PRL multiple times.
I am running 4.4.2 with Xposed Framework version 1.5, with Franco kernel r33. I did see Franco kernel r34 and will probably flash the update ASAP to see if it works any better. I am not using any power save settings for cell network quality. I am also using a Spiegen slim-armor case and tried to see if it was interfering with signal strength, it wasn't.
So my question comes down to has anybody known a fix for getting solid 3G in an area where I should be seeing some LTE and atleast full strength 3G. I am barely seeing 2G most of the time. I am just crossing my finger it isn't an antenna issue with the phone itself.
Any help, tips, or tricks would be greatly appreciated!!!
Click to expand...
Click to collapse
Look for the modem thread (didn't see you post it so if you did, sorry), and try flashing the .15 radio. That seems to be the best. The stock 4.4.2 radio (.21 or .23 can't remember) sucks. I could be halfway between towers and drop to 3g and not get LTE at all. The .15 holds LTE as long as there is really an LTE signal just fine.
i just read that ting uses sprints network. that might be the issue there, as sprint isnt known to have great coverage nor great data speeds.
adramalech707 said:
Hello,
!
Click to expand...
Click to collapse
Sacramento is entirely legacy lucent equipment. Basically **** sucks and won't get better anytime soon till they cluster launch the area. They won't fire up anything (3g / 800 mhz / 4G LTE) until they cluster launch. They can't cluster launch the area until all 200 or so sites are fully upgraded which is a ways off.
B41 is running of old Clearwire sites for now and should be mostly done by around may but you cannot connect to them unless you force LTE only mode and do the PRL update work around (i.e. PRL update every time you reboot the radio) and even then it leaves much to be desired.
So your option is to stick it out on the ****ty legacy network or find another provider that suits your needs. ATT is running 5 mhz on LTE 700 B, Tmobile has a 10x10 FDD-LTE network on AWS that is spotty as **** in around south sac area and drops to Edge when you go indoors which is probably a no go for you.
Probably the best option for you is an ATT MVNO considering your needs are inside a building.
-- Though if you do stick it out Sprint has quite an amazing portfolio in the Sacramento area with full access to eSMR 800 (5x5 mhz FDD-LTE band 26) + eSMR 800 1xAdvance, 20 mhz of PCS A-F + the 10mhz of PCS G (5x5mhz FDD-LTE Band 25) along with 55mhz of BRS (2500) + innumerable EBS (2600). Right now they're running B41 on EARFCN 40978 which is about 2630mhz or smack dab in the EBS block.
Tmobiles is here at 40mhz of AWS and ~30 mhz of PCS + the 700A later this year. They run 10x10 for FDD-LTE Band 4 and DC-HSPA+ on the other 20 mhz of AWS. They run a single PCS 5 mhz WCDMA 3G carrier and the rest of the PCS is GSM. Their 700A Band 12 will be limited to about 3x3mhz FDD-LTE when they deploy later.
ATT has quite a mishmash of spectrum. 12 mhz of 700B Band 17 (5x5 mhz FDD-LTE), 700D block Band 29 which is unpaired and unusable, the Cell 850 A block, 10mhz of AWS good for 5x5 FDD-LTE on Band 4, and 20 mhz of PCS A + D which is split for numerous WCDMA 3G + GSM carriers. So they're probably going to run AWS LTE and aggregate it with their 700B block LTE and then moving onto refarming PCS carriers later. IE -a nightmare.
Take your poison.
I'm not in your area, but Ting has been swell for me in Minnesota. Sprint's coverage map shows NO LTE in the Twin Cities of Minneapolis & St. Paul, though it exists well to the west in rural MN. Imagine my surprise to get it at my home in Hopkins, at least 75 miles away from Sprint's nearest report of coverage. Phone service is unchanged from when I was a Sprint customer.
SomeTing wong
Sent from my Nexus 5
Yes som ting is wong
Firstly it looks like when you got your service you only provided them the ESN number which they can provide you 3G and 1X
however you need a sprint 4G lte sim to actually get LTE along with 3G and 1X ask ting about it.

Is there a way to force Band 26?

So I live on the edge of LTE. At home, I tether. I have to have my phone set in certain spots to get a usable signal. I've noticed that sometimes I'll connect to Band 26 with a significantly better signal. I've also noticed that Band 25 has gotten worse... 25 gets a signal of - 114 in a really good spot and bounces to - 115 which stops working. Band 26 gets - 105ish.
So, is there a way to force the phone to connect to Band 26?

Wifi Calling and Signal Strength

Has anyone tested Wifi Calling on ATT with the v60 yet? I find on my Pixel series phones that wifi calling won't start until the call has already been established on the network, witch results in a 'blip' in the audio that cuts out for 1-2 seconds. The pixel will park on Wifi calling during standby if the signal is terrible, which I don't see too often. Is there a wifi calling preferred setting on the v60? I'm hoping it acts like the iPhone and just parks on Wifi calling during standby unless there is very good service, say -105 or better signal.
Second question, how is the signal strength on low band 5g on ATT vs band 12 LTE? Do you find it comparable? How is the signal strength in general on this phone compared to others? I'm looking to switch to ATT from Verizon, but band 12 is very congested here.

Categories

Resources