Related
Hello, after updating my MT7 - TL10 unbootable .
At startup the screen remains black , the LED flashes orange one and a green three times ( three cycles). With a hard reset is the same except that the screen is white.
Someone already you had this problem ? I begin , thank you kindly help me.
Merlin-69 said:
Hello, after updating my MT7 - TL10 unbootable .
At startup the screen remains black , the LED flashes orange one and a green three times ( three cycles). With a hard reset is the same except that the screen is white.
Someone already you had this problem ? I begin , thank you kindly help me.
Click to expand...
Click to collapse
Which kind of update method did you used? 3bts? Or FORCED UPDATE?
Have you tried to go into STOCK recovery (volume up+power button)? Is it working?
Have you downloaded and put in the DLOAD folder the CORRECT firmware for Ur phone?
Please double check and, in case, better to re-download it (be sure it is the correct one for TL-10).
Then try 3btns again.
If procedure works, it' s always a good thing to gointo stock recovery AFTER UPDATE proceure, and apply a full WIPE CACHE AND WIPE DATA/FACTORY RESET.
Hello Tuddu .
I made a forced update .
The method of the three buttons does not work = more white screen LED flashing amber and green three times ( three cycles).
When I connect it to the charger , it is happening. I fear the worst .
Merlin-69 said:
Hello Tuddu .
I made a forced update .
The method of the three buttons does not work = more white screen LED flashing amber and green three times ( three cycles).
When I connect it to the charger , it is happening. I fear the worst .
Click to expand...
Click to collapse
Have you the stock recovery installed?
Does the recovery works (can you enter into recovery properly?). If not, you should try to re flash the stock recovery, of course if the HAM7 is recognised by Windows.
Differently, i fear, it could be an hardware problem...
Sent from my S5+ using XDA Free mobile app
The situation evolved !
I come now to start the phone mode " Fastboot & Rescuemode ." But then I do not know what to do.
Here you could if the bootloader is open, the respective imgs (boot, recovery cust, and system) or flash when closed, flashing with a Huawei HiSuite FW.
can I use fastboot to install : boot.img , recovery.img , system.img .
I extracted the .img from the firmware.
I would still flash the cust.img. Then fastboot reboot and hope it starts. The question is, what your battery still says.
If it does not start, then it is probably a case for the service.
I Flasher cust.img , boot.img , recovery.img , system.img . But it does not start. What can I do more for the mode " Fastboot and rescuemode " ?
You could still try the Huawei HiSuite. Furthermore you can flash a Stock Rom. Much more remains not.
Then I flash a ROMSTOCK using cmd fastboot
Only works with the HiSuite.
tuddu said:
Which kind of update method did you used? 3bts? Or FORCED UPDATE?
Have you tried to go into STOCK recovery (volume up+power button)? Is it working?
Have you downloaded and put in the DLOAD folder the CORRECT firmware for Ur phone?
Please double check and, in case, better to re-download it (be sure it is the correct one for TL-10).
Then try 3btns again.
If procedure works, it' s always a good thing to gointo stock recovery AFTER UPDATE proceure, and apply a full WIPE CACHE AND WIPE DATA/FACTORY RESET.
Click to expand...
Click to collapse
I also have the same problem. I wonder if you could help me out also. I've been having these problem for 3 weeks now. Here's the story. I was going to sell the phone to my friend, so I was unrooting and installing stock firmware on it. I downloaded the stock firmware from Huawei website. Flash the stock recovery extracted from the firmware update.app. Put the firmware in dload on a newly bought 8GB SanDisk, and forced update. The update failed saying that the update.app could not be found even tho it is under 'root of the sdcard'/dload/upload.app. So I flashed CWM and flash the repacked update.app using the Huawei Update Extractor. It was fine until I redo the forced update process. EMUI showed up half way and failed with the same reason, it could not find the update.app. I restart the phone and it is bricked.
Condition right now. BL is unlocked.
- Turn on normally: It flashes [Red Green Green Green] x 3 before turning off.
- Turn on with Vol+ + Power to get to the recovery: Same result as turning on normally.
- Turn on using 3BTNs: It shows "HUAWEI Ascend" logo and stays there for 48 hours. Then I figured it wasn't going to do anything.
- Turn on into bootloader with vol- + power works fine. I can get to the bootloader.
What I've done so far. Most are suggestion on XDA forum, somes are from other sources.
- fastboot flash boot, recovery, cust, userdata, and system of 3 different versions of firmware (MT7-TL10 for Global, Chinese, and MT7-TL09 Global). All firmwares are from Huawei website. None of them work.
- fastboot flash CWM recovery. Didn't work. I could not get to the recovery mode.
- fastboot flash many boot.img from custom roms hoping it would at least take me to the recovery. Didn't work.
- bought another micro sd card, which didn't matter since both cards work fine on other devices.
- Try using older version of Hi-Suite that has the restore function. This is the weird part. Hi-Suite would starts itself as soon as it detects the phone in bootloader mode, but it says "Phone is not connected." Unfortunately, this fails also.
I wish there were a way to force boot the phone into the recovery mode other than the button combos. What do you think I could do? I'll try anything. Thanks.
i have same problem too . anyone get working way ??????
Here's the story,
This is my dad's phone. He just recently bought it. Out of nowhere, it stuck in bootloop (screen only show phone's model). He asked me if I can fix it.
I tried recovery mode and failed. It can't enter recovery mode. So I should fix it via download mode, right?
The thing is, I don't even know the firmware's phone. So I'm assuming it is Indonesian, cause I live in Indonesia.
I flash using odin and it passed but the phone still stuck.
When rebooting, the boot screen flashing 3-5 times (show phone's model - black screen - show phone's model - black screen - and so on), then stuck at boot screen again.
This is weird. So I thought maybe wrong firmware. I tried India and Phillipines (global) firmware too but the problem still exist.
I don't know how to solve it. Please help.
Phone's model: SM-J700F/DS
Um if you bought it from a samsung store, then take it back there.
my sasmsung galxy sm-j700f suddenly reboot to samsung lable
my mobile unable to open it flash to me "sasmung galaxy j7 powered by android" and it refuse to open then i flash the custom firmware by odin many times but it did not work then it try to flash twrp recovery and wibe data (factory reset )it did not work
Help please
gitompak said:
Here's the story,
This is my dad's phone. He just recently bought it. Out of nowhere, it stuck in bootloop (screen only show phone's model). He asked me if I can fix it.
I tried recovery mode and failed. It can't enter recovery mode. So I should fix it via download mode, right?
The thing is, I don't even know the firmware's phone. So I'm assuming it is Indonesian, cause I live in Indonesia.
I flash using odin and it passed but the phone still stuck.
When rebooting, the boot screen flashing 3-5 times (show phone's model - black screen - show phone's model - black screen - and so on), then stuck at boot screen again.
This is weird. So I thought maybe wrong firmware. I tried India and Phillipines (global) firmware too but the problem still exist.
I don't know how to solve it. Please help.
Phone's model: SM-J700F/DS
Click to expand...
Click to collapse
try this guide I made for restoring stock firmware from Samsung sever with the smartswitch app for Windows.
http://forum.xda-developers.com/galaxy-j7/j700t-development/how-to-restore-j700t1-model-to-t3423455
but you NEED YOUR SERIAL# AND MODEL # of that phone!
Fix # I dont know - if it works
Try this if it helps....
You will need ( link unavailable due to my little amount of posting and not using this account):
Galaxy J7 USB Drivers for the phone
The stock ROM for the phone (exact firmware)
Odin
First install Samsung Galaxy J7 USB drivers on Windows PC. Then Download the Samsung Galaxy J7 Stock Firmware from the link above and extract the folder on your desktop.
Download ODIN flash tool to flash the firmware on your phone. Extract the folder and you will see the ODIN.exe file in the folder.
Now Turn off your Galaxy J7 and Boot in download mode.(Hold down Volume Down + Home + Power button at the same time)
Once your Galaxy J7 is in download mode. Connect it to the PC with USB cable and run the ODIN.exe file on your desktop.
If everything is right and drivers are working properly. You will see the blue box on the ODIN screen, if not reinstall the drivers again and reboot your PC.
Now select the AP option from the ODIN screen and select the firmware file that you extracted
Hit the Start button from the ODIN screen to start the flashing process.
Once completed you will see the PASS messages on the ODIN and Phone will reboot automatically. Now you can disconnect your phone.
IMPORTANT:. If your phone is still stuck on the boot loop or in the Samsung Android Logo, then turn off the phone and reboot in recovery mode. TO do this Hold down Volume Up + Home + Power button at the same time. Now from recovery select Wipe Data/Factory Reset and after that Wipe cache partition. Now reboot you phone. If you are using a custom recovery, just wipe data/factory reset and wipe cache partition again.
DONE!!!! You unbricked your Galaxy J7. Now your Phone is running the stock ROM. Check it on the setting. ENJOY..
What is the recommended firmware for
SM-J700F/DS?? Can I flash it with any SM-J700F ?
Thanks!
hazembadr00 said:
my mobile unable to open it flash to me "sasmung galaxy j7 powered by android" and it refuse to open then i flash the custom firmware by odin many times but it did not work then it try to flash twrp recovery and wibe data (factory reset )it did not work
Help please
Click to expand...
Click to collapse
Can you not hijack threads and make your own please?
Samsung J6 Touch Not Working
J6 touch not working after official update
gitompak said:
Here's the story,
This is my dad's phone. He just recently bought it. Out of nowhere, it stuck in bootloop (screen only show phone's model). He asked me if I can fix it.
I tried recovery mode and failed. It can't enter recovery mode. So I should fix it via download mode, right?
The thing is, I don't even know the firmware's phone. So I'm assuming it is Indonesian, cause I live in Indonesia.
I flash using odin and it passed but the phone still stuck.
When rebooting, the boot screen flashing 3-5 times (show phone's model - black screen - show phone's model - black screen - and so on), then stuck at boot screen again.
This is weird. So I thought maybe wrong firmware. I tried India and Phillipines (global) firmware too but the problem still exist.
I don't know how to solve it. Please help.
Phone's model: SM-J700F/DS
Click to expand...
Click to collapse
Try to install TWRP on the phone, then try to wipe out the stock firmware that installed. And of course, reinstall the original stock firmware that come on that region. Its actually came from Indonesia, so be sure to install the right one.
Sijaygamer said:
What is the recommended firmware for
SM-J700F/DS?? Can I flash it with any SM-J700F ?
Thanks!
Click to expand...
Click to collapse
i need to know the answer for this please
i"ve tried every j700f rom out there nothing worked for me
is there any OFFICIAL firmware for the j700f/ds model ?
I tried rooting my brand new Mate 9. I unlocked the bootloader, but the wipe that followed failed for some reason. In the eRecovery there's no option to Wipe Data / Factory Reset and when I try to log in at the start screen, the keyboard is not showing up, so I can't even log in. Tried wiping through ADB, but it doesn't even see the device. Any other way to wipe it, so I can proceed with installing TWRP and rooting this sucker. Thanks in advance!
You can boot to fastboot and flash twrp.
While the usb plugged in,hold volume down and power, when the phone vibrate remove power button and keep pressing volume down.
For stock recovery, remove the usb,hold volume up and power and when you see the logo, remove power and keep pressing volume up.
You can copy a keyboard apk on ur sd card and install when you are in the system,just skip the log in screens.
Thanks! I managed to install TWRP and boot to it to do a factory reset, thinking that it will resolve my login issue. Now I'm stuck in bootloop.
And if I try to boot into TWRP again by pressing Volume Up + Volume Down + Power it boots me into eRecovery that wants to perform an update, which after 5% fails saying: The update package does not exist.
So I can't even get back to TWRP nor the system.
Any advice to resolve this?
nomad667 said:
Thanks! I managed to install TWRP and boot to it to do a factory reset, thinking that it will resolve my login issue. Now I'm stuck in bootloop.
And if I try to boot into TWRP again by pressing Volume Up + Volume Down + Power it boots me into eRecovery that wants to perform an update, which after 5% fails saying: The update package does not exist.
So I can't even get back to TWRP nor the system.
Any advice to resolve this?
Click to expand...
Click to collapse
well to boot into recovery just use vol up+power and release once u see the huawei logo.btw when your factory reset fail during unlocking BL you can manually boot into the system and reset thru settings again.
Never do factory reset via twrp. It does not support huawei's data partition.
To avoid bootloop, just flash stock recovery and do factory reset with it. You need flash additional stock zips to restore additional apps and themes.
I had exactly the same problem as you. After rooting and start wipe, the factory reset seems had not finished well and the phone booted to lock screen with password field, but without keyboard...
Only procure that worked for me was rebranding the phone and installing another full room using Funky Huawei. Yes I know it is a paid service but I believe you will be happy to know it can help you.
Good luck
I was on Elite ROM v7 and I wanted to go back to stock with the official Honor 6X Rollback Package but failed. Now the phone stuck at boot screen. I can't boot into fastboot, no twrp, no stock recovery. 3 button dload method wont work any more. If I hold the power button long enough, the phone will reboot with two vibrations and go right back to "this device is booting" screen. I waited till the battery is depleted and tried every possible combination again, including volume down+plug in usb cable connecting to a pc, still boots into the same screen.
Here's what I have done that caused the brick.
1) while in Elite Rom v7, I power off the phone.
2) dload official intermediate package.
3) dload official 6.0. (it succeeded followed by restart and user reset.
4) the phone then stuck at the blue Honor screen.
5) I force the phone to reboot by holding the power button, the phone entered stock eRecovery. I did a factory reset. The phone still stuck upon reboot.
6) I reboot the phone to fastboot mode and unlock the bootload, after this step, the phone stuck at "this device is booting" screen and wont boot into anything else.
When looking back, I guess between 1 and 2, I should have booted into twrp and format data, which is ecryted.Since I missed this step, it caused the system hung at step 4.
I have a similar problem i thinck it has to do with the warning message i waited until battery was empty and then i got a little different screen wich allows you to enter recovery or boot the device if you get this screen booting will work.
In my case i get the broken screen only if i reboot if i shutdown i get the wirking screen. But my problem is a bir more tricky because the recovery dosent work properly it gives my the option o download stock rom and recovery but it allways failes wehn fetching package info...
The other option i get in the recovery is to shutdown or reboot nothing else
And i can't use fastboot because of the reboot problem...
Using the hardware keys dosent work too...
XelaaleX1234 said:
I have a similar problem i thinck it has to do with the warning message i waited until battery was empty and then i got a little different screen wich allows you to enter recovery or boot the device if you get this screen booting will work.
In my case i get the broken screen only if i reboot if i shutdown i get the wirking screen. But my problem is a bir more tricky because the recovery dosent work properly it gives my the option o download stock rom and recovery but it allways failes wehn fetching package info...
The other option i get in the recovery is to shutdown or reboot nothing else
And i can't use fastboot because of the reboot problem...
Using the hardware keys dosent work too...
Click to expand...
Click to collapse
What reboot problem? Is the usb cable in when your attempting to boot fastboot?
---------- Post added at 01:46 PM ---------- Previous post was at 01:45 PM ----------
shadowcliffs said:
I was on Elite ROM v7 and I wanted to go back to stock with the official Honor 6X Rollback Package but failed. Now the phone stuck at boot screen. I can't boot into fastboot, no twrp, no stock recovery. 3 button dload method wont work any more. If I hold the power button long enough, the phone will reboot with two vibrations and go right back to "this device is booting" screen. I waited till the battery is depleted and tried every possible combination again, including volume down+plug in usb cable connecting to a pc, still boots into the same screen.
Here's what I have done that caused the brick.
1) while in Elite Rom v7, I power off the phone.
2) dload official intermediate package.
3) dload official 6.0. (it succeeded followed by restart and user reset.
4) the phone then stuck at the blue Honor screen.
5) I force the phone to reboot by holding the power button, the phone entered stock eRecovery. I did a factory reset. The phone still stuck upon reboot.
6) I reboot the phone to fastboot mode and unlock the bootload, after this step, the phone stuck at "this device is booting" screen and wont boot into anything else.
When looking back, I guess between 1 and 2, I should have booted into twrp and format data, which is ecryted.Since I missed this step, it caused the system hung at step 4.
Click to expand...
Click to collapse
Follow this guide https://forum.xda-developers.com/honor-6x/how-to/how-to-to-stock-emui-5-0-flashing-twrp-t3679985
Got the solution
After the battery was empty it booted into a little different screen wich i was able to boot from, then i downloaded the firmware and put it into dload folder on external sd. Next i force updated by holding [volume up] [Volume down] and [Power button]. Now i have a working recovery boot and Rom. Everything is stock and the bootloader is locked again.
I discovered this this morbign and didnt had time to answer earlyer sorry for that...
Someone asked because of the bootloader the only thing i got was this broken screen didnt react to my input, cable plugged in plugged out. Maby the warning screen comes before everything or there is not enough time for the timout or whatever... The important thing is that you can fix it that way!:laugh::victory:
I have an A71 that is about a year and a half old. Last week it got stuck in a boot loop. The only screen that I could access was the download screen. So I downloaded Odin and flashed all the appropriate firmware onto the phone and it rebooted back into the boot loop. Am I out of luck? I have 200 bucks still owed on the phone, and dont really want to buy a new one, out of principle, if nothing else. Any thoughts on getting it back up and running?
I had the same problem just now.
So what I did to get to work was:
1. Hold the Volume Up + Power Button until it goes into the Android Recovery Menu
2. Select Wipe Cache Partition
3. Select Wipe Data/Factory Reset
4. Reboot System