Database Info

[EOL][ROM] CAF CyanogenMod 12.1 for V400 (LG G Pad 7.0 WiFi) [October 13, 2015]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
This is an unofficial CyanogenMod 12.1 ROM for the LG G Pad 7.0 (WiFi) with a very shiny CAF-based kernel.
All of the basics should be working (video playback, WiFi, etc.).
Installation instructions:
Download ROM and save to sdcard
Boot into TWRP
Perform a full backup
Factory reset, wipe cache and system
Flash ROM, Flash GAPPS (Optional)
Reboot
Enjoy! (Optional)
Source code:
Kernel (cm-12.1 branch): https://github.com/sultanxda/android_kernel_lge_v400
Local manifest (contains the rest of the sources): https://github.com/sultanxda/android/blob/master/v400/cm-12.1/local_manifest.xml
Credits (in no particular order):
The CyanogenMod team
CyanogenMod contributors
CAF
bangprovn
invisiblek
timmytim
If I forgot you, slap me and force me to use an iPhone 4 running iOS 8
Downloads:
ROM: https://www.androidfilehost.com/?w=files&flid=29692&sort_by=date&sort_dir=DESC
XDA:DevDB Information
CAF CyanogenMod 12 for V400, ROM for the LG G Pad 10.1
Contributors
Sultanxda
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Created 2015-04-05
Last Updated 2018-01-20

Changelog:
October 13, 2015:
ROM:
*Switched to stable CyanogenMod branch
*Latest upstream (stable/cm-12.1-YOG7D) CyanogenMod changes
*Removed built-in superuser (use SuperSU instead)
*Disabled strict mode (fixes the flashing red borders that occur randomly, especially in Chrome)
*SELinux is now enforcing
*Changed I/O scheduler to Deadline
*Switched back to old WiFi firmware and configuration
Kernel:
*Updated CPU input boost driver (better performance now)
*Enabled CPU boosting on thread migration (gives much better performance)
*Switched back to old WiFi drivers
*Improved eMMC performance
*Added patches for SELinux
July 23, 2015:
ROM:
*Latest upstream CyanogenMod changes
*ROM is now compressed with LZMA (ROM zip is 50MB smaller as a result, and takes much less time to upload/download)
Kernel:
*Synced with CAF LA.BF.1.1.1_rb1.26
*Updated prima WiFi drivers from CAF LA.BF.1.1.1_rb1.26
*Enabled dynamic FPS feature for the display (this will reduce the power consumed by the display in some usecases)
July 6, 2015:
ROM:
*Latest upstream CyanogenMod changes
*Synced audio HAL with CAF LA.BF.1.1.1_rb1.25
*Synced display HAL with CAF LA.BF.1.1.1_rb1.25
*Updated WCNSS WiFi configuration from V40020a update
*Updated WCNSS WiFi firmware from V40020a update
*Updated venus video firmware from V40020a update
*Reduced time needed to optimize apps at boot
Kernel:
*Synced with CAF LA.BF.1.1.1_rb1.25
*Updated prima WiFi drivers from CAF LA.BF.1.1.1_rb1.25
*Vibrator is disabled while recording videos (so the noise can't enter videos)
*Misc. fixes
June 14, 2015:
ROM:
*Latest upstream CyanogenMod changes
*Synced audio HAL with CAF LA.BF.1.1.1_rb1.24
*Synced display HAL with CAF LA.BF.1.1.1_rb1.24
*Synced media HAL with CAF LA.BF.1.1.1_rb1.24
Kernel:
*Synced with CAF LA.BF.1.1.1_rb1.24
May 24, 2015:
ROM:
*Latest upstream CyanogenMod changes
*Synced display and media HALs with CAF LA.BF.1.1.1_rb1.22
*Two CPUs are always kept online instead of one (better performance and unnoticeable change to battery life)
*Switched to vanilla CAF LA.BF.1.1.1_rb1.22 audio HAL (better audio quality)
Kernel:
*Synced with CAF LA.BF.1.1.1_rb1.22
*Updated core logic of the CPU input boost driver again (less aggressive and smarter now)
*Added some updates to the Interactive CPU governor
May 9, 2015:
ROM:
*Latest upstream CyanogenMod changes
*Updated Adreno graphics libraries
*Updated display and media HALs from CAF
Kernel:
*Synced with CAF LA.BF.1.1.1_rb1.21
*Updated core logic of the CPU input boost driver
*Fixed high CPU load caused by uninterruptible threads (myfluxi)
April 22, 2015:
ROM:
*Latest upstream CyanogenMod changes
*Android 5.1.1
*Increased speaker volume
*Updated display HAL to CAF LA.BF.1.1.2_rb1.18
*Added proper color-calibration interface for LiveDisplay (invisiblek)
*Disabled active fstrim (invisiblek)
Kernel:
*Synced with CAF LA.BF.1.1.2_rb1.18
*Added CPU input boost driver I wrote myself (makes the device feel smoooooth)
*Removed zRAM
*Disabled DSI burst mode (caused graphical glitches and made the display feel laggy)
*Limited vibrator to max of 1865mV (previous max of 3100mV was insane)
April 16, 2015:
ROM:
*CyanogenMod 12.1
*Android 5.1
*Updated Adreno graphics libraries from the official 20A Lollipop update
Kernel:
*Rebased kernel to CAF LA.BF.1.1.2_rb1.17
*Added back magnetic-cover support
*Added back dt2w support
April 5, 2015:
ROM:
*Initial release
Kernel:
*Initial release of kernel based on CAF LA.BF.1.1.1_rb1.17

Reserved

Like I said in the OP, some kernel features may be missing (as I removed a bunch of stuff that my dad will never use). I'm not sure if you guys had F2FS before, but this build does not have F2FS. Have fun.

Thanks for you work @Sultanxda , this build is much smoother than bangprovn's, nearly everything works, camera works, wifi is stable, performance is better

Awesome , downloading .... It's still not the CM12.1, right? Would not be stable yet? Why on my S4 also is not with CM 12.1...

thank Sultanxda : D: D: D

Does it have support for the magnetic smart case?
Thanks btw

Smoth Rom, but tap to wake seems to not work
---------- Post added 6th April 2015 at 12:04 AM ---------- Previous post was 5th April 2015 at 11:59 PM ----------
izzet3838 said:
Does it have support for the magnetic smart case?
Thanks btw
Click to expand...
Click to collapse
Mine doesn't work.

Touch unlock does not work.
Netflix does not run.
Kernel max, mini does not change.

My first try to modify my tablet was today with this ROM.
After a little time playing with it, I noticed that the screen brightness does not change, so it is a little tiring for the eyes.
I hope these little things to be fixed in the future.
But thanks for the effort to get the CM on our little tablets!

one question
Sorry for question) But tell whether another update cm 12.1 for our violent tablet?

There is another kernel for this rom.

evripidis said:
My first try to modify my tablet was today with this ROM.
After a little time playing with it, I noticed that the screen brightness does not change, so it is a little tiring for the eyes.
I hope these little things to be fixed in the future.
But thanks for the effort to get the CM on our little tablets!
Click to expand...
Click to collapse
Screen brightness can change. I just checked it and it works.
gusmao100 said:
There is another kernel for this rom.
Click to expand...
Click to collapse
No... Using a different kernel anyway wouldn't make sense, as you'd lose all the benefits of the CAF kernel.

I was preparing to install this rom more just received the official update to Android 5.0.2. I will test for a few days and evaluate whether it is the best option.

Sultanxda said:
Screen brightness can change. I just checked it and it works.
Click to expand...
Click to collapse
Mine doesn't work...
What can I do?
I have checked this many times...
The brightness change through Bs player but inside the OS.
Update
After a clean install the problem solved

installed the official update to Android 5.0.2, but now as rootear ???

gusmao100 said:
installed the official update to Android 5.0.2, but now as rootear ???
Click to expand...
Click to collapse
Activate Developer options (opções de desenvolvedor) , settings (configurações), Developer options, root access (acesso root), select only apps or apps and adb.

braulio_holtz said:
Activate Developer options (opções de desenvolvedor) , settings (configurações), Developer options, root access (acesso root), select only apps or apps and adb.
Click to expand...
Click to collapse
I'm talking about the official update today towelroot does not work !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

gusmao100 said:
I'm talking about the official update today towelroot does not work !!!
Click to expand...
Click to collapse
Here is better http://forum.xda-developers.com/g-pad-10/general/dev-thread-lg-g-pad-7-0-8-0-10-1-t2838995

[KERNEL][8.1.0][3.10.108] PureZ-Kernel-5.8 for LG Nexus 5X [15/10/2018]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PureZ Kernel​INTRODUCTION
Hello...Nexus 5X Users,
I want to present to you my PureZ Kernel Project. I will continue kernel development with this Thread. This is my PureZ Kernel build for Nexus 5X. Based on Google's Kernel Source and Added any Kernel Features. Compiled with Google GCC PrebuiltToolChain. Built FlashableZip with AnyKernel2 and thanks to @osm0sis.
I am trying to add special Kernel Features to my PureZ Project.
I hope you will Love it.
REQUIREMENTS
• Android 8.0.0 / 8.1.0
• Nexus 5X
• TWRP Recovery
FEATURES
Latest Android Security Patch on the Latest Android Version 8.1.0
Easy Installation with TWRP FlashableZip
Compiled with Google's GCC PrebuiltToolChains
Built Flashable with AnyKernel2
Android Oreo 8.1.0 Support
Update to Date Android Security Patch (October, 2018)
Update to Date Linux Kernel Version (3.10.108)
Screen Off Volume Control
KCAL Advanced Color Control
MultiROM Support
Thermal Core Control
Wake Gestures : DoubleTap2Wake/Sleep. Sweep2Wake/Sleep.
F2FS Support
SafetyNet Pass
Disable Forced Encryption and dm-verity
Supported Spectrum Kernel Manager
Included Spectrum's Kernel Profile Settings
Spectrum Kernel Profile Settings : Balance, Performance, Battery and Gaming
Backlight Dimmer Option
Faux Sound Control with High Performance Audio
GPU Governors : userspace, powersave, performance, simple_ondemand, msm-adreno-tz, cpufreq.
CPU Governors : interactive, ondemand, userspace, powersave, conservative, performance
CPU Governors : zzmoove, elementalx, chill, intelliactive
I/O Scheduler : noop, deadline, row, cfq, test-iosched.
and More Features.
INSTALLATION
• Download PureZ Kernel Zip
• Reboot to Recovery
• Flash PureZ Kernel Zip
• Reboot
• Done
KERNER MANAGER
For Kernel Management,
You can use Kernel Auidtor App.
OR
Other Kernel Manager Apps.
OR
Can use Spectrum Kernel Manager ( Supported )
DOWNLOAD
AndroidFileHost: PureZ-Kernel-bullhead-5.8
KERNEL SOURCE
https://github.com/purez-kernel/bullhead
THANKS TO
@google for Kernel Source
@The Flash for Kernel Guides and Tutorials
@osm0sis for AnyKernel2
@frap12w9 for Spectrum Kernel Manager and Supporting
@flar2,
@jollaman999,
@Sovaca,
@franciscofranco,
@Sultanxda and
@rachanta for your Kernel commits and helps.
Thank You Sirs.
XDA:DevDB Information
PureZ Kernel Project, Kernel for the LG Nexus 5X
Contributors
ZawZaw
Source Code: https://github.com/purez-kernel/bullhead
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 5.8
Stable Release Date: 2018-10-15
Created 2017-06-24
Last Updated 2018-10-15

CHANGE LOG
Version 1.0 :
• Initial Release
Version 2.0 :
• Add SafetyNet Pass
• Add Wake Gestures Features
• Add ScreenOff Volume Control
Version 3.0 :
• Updated Linux version 3.10.107
Version 3.1 :
• Add Backlight Dimmer Option
• Add CPU Overclocking
• Add Sound Controls
Version 3.2 :
• Add KCAL Advanced Color Control
Version 3.3 :
• Merge July Android Security Updates
Version 3.5 :
• Add F2FS Support
• Bugs fix
Version 3.6 :
• Update to August Android Security Patch (August, 2017)
Version 4.0 :
• Merged android-8.0.0_r2
• Updated Latest Android Security Patch on the Latest Android Version ( Oreo 8.0.0 )
• Supported Android 8.0.0 Oreo
Version 4.2 :
• Add Supported Spectrum Kernel Manager
• Added Kernel Profiles on ramdisk
• Included 4 Kernel Profile Settings
• 4 Kernel Profile Settings : Balance, Performance, Battery and Gaming
• Bugs fix
Version 4.5 :
• Add CUP Governors
• CPU Governors : zzmoove, elementalx, chill, intelliactive, conservative
• Bugs fix
Version 4.6 :
• Update to October Android Security Patch (October, 2017)
Version 4.7 :
• Update to November Android Security Patch (November, 2017)
Version 4.8 :
• Update to December Android Security Patch (December, 2017)
• Supported Android Oreo 8.1.0
• Bugs fix
Version 4.9 :
• Update to January Android Security Patch (January, 2018)
• Merged android-8.1.0_r17
• Bugs fix
Version 5.0 :
• Update to February Android Security Patch (February, 2018)
• Merged android-8.1.0_r22
• Bugs fix
Version 5.1 :
• Fixed some miss upstream Linux kernel patches
• Big merge Linux 3.10.74-to-108 (Completed)
• Successfully merged upstream Linux kernel patches
Version 5.2 :
• Update to March Android Security Patch (March, 2018)
Version 5.3 :
• Update to April Android Security Patch (April, 2018)
Version 5.4 :
• Update to May Android Securtiy Patch (May, 2018)
Version 5.5 :
• Update to June Android Security Patch (June, 2018)
Version 5.6 :
• Update to July Android Security Patch (July, 2018)
• Merge android-8.1.0_r81 into Oreo
Version 5.7 :
• Update to August Android Security Patch (August, 2018)
• Update to September Android Security Patch (September, 2018)
• Update to Android 8.1.0 Release 92 (bullhead)
• Update to Android 8.1.0 Release 102 (OPM6.171019.030.K1,bullhead)
Version 5.8 :
• Update to Android 8.1.0 Release 0.112 (bullhead)
• Update to October Android Security Patch (October, 2018)
•••

SCREENSHOTS

Reserved.

Thanks
Sent from my Nexus 5X using XDA-Developers Legacy app

mataflakitas said:
Thanks
Click to expand...
Click to collapse
Yeah,
Thanks for your support.
•••
Sent from my Google Nexus 5X using XDA Labs

Awesome! Thanks!

TW1ST3D1NS4N3 said:
Awesome! Thanks!
Click to expand...
Click to collapse
Thank You very Much.
•••
Sent from my Google Nexus 5X using XDA Labs

Will this work for stock 7.1.2?

tactical bacon said:
Will this work for stock 7.1.2?
Click to expand...
Click to collapse
Yes Bro,
I am now using my PureZ Kernel with PureZ StockBased ROM 7.1.2 Latest Build No.
•••
Sent from my Google Nexus 5X using XDA Labs

***UPDATE***
Updated to v3.0
Changelog:
https://forum.xda-developers.com/showpost.php?p=72805964&postcount=2
Download:
https://www.androidfilehost.com/?fid=673368273298967956
//Happy Flashing

How you cherry picked the upstream and Security patch?

Do you also plan to support O?

AFK269 said:
How you cherry picked the upstream and Security patch?
Click to expand...
Click to collapse
I used The Flash's Guides.
Here...
https://forum.xda-developers.com/showpost.php?p=68138969&postcount=3
and,
here...
https://forum.xda-developers.com/an...rence-how-to-upstream-android-kernel-t3626913
Thank You!
Sent from my Google Nexus 5X using XDA Labs

CyberCodeDroid said:
Do you also plan to support O?
Click to expand...
Click to collapse
Yes Bro,
Coming soon...
•••
Sent from my Google Nexus 5X using XDA Labs

***UPDATE***
PureZ Kernel Updated to v3.1
Changelog:
https://forum.xda-developers.com/showpost.php?p=72805964&postcount=2
Download:
https://www.androidfilehost.com/?fid=889764386195912899
•••

UPDATE
********
Updated to v3.2.
Changelog:
https://forum.xda-developers.com/showpost.php?p=72805964&postcount=2
Download:
https://www.androidfilehost.com/?fid=673368273298968525
If you have any bugs,
Please report bugs to me.
Thank You.
•••

Hey...friends,
If you have bugs, report back to me.
Thanks!

Merged : July Android Security Patch
Coming soon....
//PLAYER

I don't have make this ROM

[OFFICIAL][9.0.0_r46][ASB_2019-11][mido] XenonHD 9.0 (15-11-2019)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TeamHorizon's XenonHD ROM builds for Xiaomi Redmi Note 4(X) Snapdragon (mido)
https://www.xenonhd.com/
XenonHD is a custom firmware aka ROM for various Android devices. It is based on LineageOS 16.0 with additional features, performance and battery life improvements.
The idea behind XenonHD is to give users a ROM that is "blazing fast, rock stable and buttery smooth".​
Device Source:
android_device_xiaomi_mido
device_xiaomi_msm8953-common
kernel_xiaomi_msm8953-3.18
vendor_xiaomi_mido
vendor_xiaomi_msm8953-common
Download Links:
Recovery: Unofficial TWRP 3.3.1-0 (OSDN mirror)
ROM: Experimental | Official
Gapps: opengapps.org
Changelog: Experimental | Official​
Flashing Instructions:
To install this ROM you will need to have a latest custom Recovery such as TWRP installed.
Copy the downloaded ROM to your phone.
Boot into your recovery
Back up your ROM
Make a full wipe (system, data, cache, dalvik)
Install the ROM
Install GAPPS package
Reboot - the first boot can take up to 5 minutes
Installing updates:
Copy the downloaded update to your phone.
Boot into your recovery
Back up your ROM
Install the update
Optionally wipe caches
Reboot
Other Links:
GitHub
Telegram
XDA:DevDB Information
Official XenonHD 9.0 ROM by TeamHorizon, ROM for the Xiaomi Redmi Note 4
Contributors
krasCGQ, dadi11
Source Code: https://github.com/TeamHorizon
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2019-11-15
Beta Release Date: 2019-06-13
Created 2018-10-08
Last Updated 2019-11-16

[SIZE=+1]Notes[/SIZE]​WARNING: Starting from April 9 build, this ROM will encrypt your device. If you get stuck in bootloop, it means that your data partition doesn't have 16 kB preserved for crypto footer. Either format your data partition with TWRP linked in OP or flash any zip that removes force encryption. Even if you don't have any issues, make sure you have a working backup in case encryption fails. If you're already encrypted, you don't need any of extra steps mentioned here.
[SIZE=+1]Changelogs[/SIZE]​19-08-2019 (UTC+8) – Official
Synced with XenonHD and LineageOS sources up to August 19, 2019 1:00 PM (UTC+8).
Android 9.0.0_r46 (August security patch)
Updated CAF sources to LA.UM.7.4.r1-05400-8x98.0 / LA.UM.7.6.r1-05500-89xx.0.
Some minor changes.
kernel: Updated to CAF LA.UM.7.6.r1-05500-89xx.0.
kernel: Merged android-3.18 changes up to August 10, 2019 UTC+8.
08-07-2019 (UTC+8) – Official
Synced with XenonHD and LineageOS sources up to July 8, 2019 (UTC+8).
Android 9.0.0_r44 (July security patch)
kernel: Merged android-3.18 changes up to June 28, 2019 UTC+8.
22-06-2019 (UTC+8) – Official
Synced with XenonHD and LineageOS sources up to June 22, 2019 4:00 PM (UTC+8).
Shipped with MIUI Camera instead of LineageOS Snap Camera.
Updated CAF sources to LA.UM.7.5.r1-05300-8x96.0.
kernel: Updated to CAF LA.UM.7.5.r1-05300-8x96.0.
kernel: Merged android-3.18 changes up to June 20, 2019 UTC+8.
13-06-2019 (UTC+8) – Experimental
Synced with XenonHD and LineageOS sources up to June 12, 2019 12:00 AM (UTC+8).
Android 9.0.0_r40 (June security patch)
Synced common tree with LineageOS changes.
Merged camera HAL changes from ZeeLog.
Updated camera blobs from MIUI China developer 9.5.30.
Updated common blobs from tissot V10.0.9.0.PDHMIXM.
Updated CAF sources to LA.UM.7.3.r1-07800-sdm845.0 / LA.UM.7.4.r1-05300-8x98.0.
kernel: Merged android-3.18 changes up to June 13, 2019 UTC+8.
25-05-2019 (UTC+8) – Experimental
Synced with XenonHD and LineageOS sources up to May 25, 2019 1:00 AM (UTC+8)
Android 9.0.0_r37 (May security patch)
Synced common tree with LineageOS changes.
Updated GPS blobs/HALs from CAF LA.UM.7.6.r1-04300-89xx.0.
Updated display, graphics, media and postprocessing blobs from OnePlus 3 Community Beta.
Updated audio-related configurations.
Don't start biometrics service if Goodix fingerprint isn't ready (nichcream).
kernel: Updated to Linux 3.18.140 (EOL) and CAF LA.UM.7.5.r1-04800-8x96.0.
kernel: Reverted LMK driver to android-3.18 version.
kernel: Built with Clang 9.0.3.
14-04-2019 (UTC+8) – Official
Synced with XenonHD and LineageOS sources up to April 14, 2019 06:30 PM (UTC+8)
Synced common tree with LineageOS changes.
Restored missing IQtiRadio 1.0 entry again (forgotten during rebase).
kernel: Some stuffs...
10-04-2019 (UTC+8) – Official
First Official build.
Synced with XenonHD and LineageOS sources up to April 10, 2019 10:30 AM (UTC+8).
Updated audio/display/media HALs and cryptfs_hw to LA.UM.7.5.r1-04500-8x96.0.
kernel: Updated to CAF LA.UM.7.5.r1-04500-8x96.0.
09-04-2019 (UTC+8) – Experimental
Synced with XenonHD and LineageOS sources up to April 9, 2019 12:00 PM (UTC+8).
Android 9.0.0_r35 (April security patch)
Synced common tree with LineageOS changes.
Enabled forced encryption (see warning above).
kernel: Partially reverted fixes to FT5435 driver.
kernel: Updated to Linux 3.18.138.
26-03-2019 (UTC+8) – Experimental
March 12 build has been taken down due to issues; this build replaces it instead. Sorry for the inconvenience.
Synced with XenonHD and LineageOS sources up to March 26, 2019 12:00 AM (UTC+8).
Fixed RIL instability that causes the device to go dead by dropping Qualcomm's variant of RIL daemon.
kernel: Reverted an upstream Prima WLAN patch that causes issues with WiFi not turning on after driver restart.
kernel: Updated to Linux 3.18.137.
12-03-2019 (UTC+8) – Experimental
Synced with XenonHD and LineageOS sources up to March 12, 2019 5:45 PM (UTC+8).
Android 9.0.0_r34 (March security patch)
Brought up fingerprint HAL changes from zeelog's device tree.
Upstreamed CAF HALs to their latest respective tags.
Any other under the hood changes.
kernel: Updated to CAF LA.UM.7.5.r1-04300-8x96.0.
24-02-2019 (UTC+8) – Experimental
Synced with XenonHD and LineageOS changes up to February 23, 2018 9:00 PM (UTC+8).
Fixed RIL doesn't work after boot 2/3 of the time.
Fixed Touch HW didn't build causing KeyDisabler to not work.
Voice call volume steps set to 7 and media volume steps set to 25.
Added ClearKey DRM plugin.
kernel: Updated to Linux 3.18.136.
15-02-2019 (UTC+8) – Experimental
Synced with XenonHD and LineageOS changes up to February 14, 2018 12:00 AM (UTC+8).
Android 9.0.0_r31 (February security patch)
Merged common tree changes from LineageOS.
Upstreamed CAF HALs to their latest respective tags.
kernel: Updated to Linux 3.18.134 and CAF LA.UM.7.5.r1-04100-8x96.0.
28-01-2019 (UTC+8) – Experimental
Synced with XenonHD and LineageOS changes up to January 28, 2018 (UTC+8).
Merged common tree changes from LineageOS.
Updated graphics blobs from CAF LA.UM.7.6.r1-03700-8x96.0.
SELinux Enforcing.
kernel: Updated to Linux 3.18.132 and CAF LA.UM.7.5.r1-04000-8x96.0.
09-01-2019 (UTC+8) – Experimental
Synced with XenonHD and LineageOS changes up to January 9, 2018 1:00 PM (UTC+8).
Android 9.0.0_r30 (January security patch)
Updated SDM blobs from D1C.
Included display wakeup fix from LilBlinx.
08-01-2019 (UTC+8) – Experimental
Rebased common tree again over LineageOS tree. Changes should be negligible, WiFi Display blobs are intact.
Updated few more blobs from tissot.
06-01-2019 (UTC+8) – Experimental
Synced with XenonHD and LineageOS changes up to January 5, 2019 11:30 PM (UTC+8).
Android 9.0.0_r21 (December security patch)
Rebased to Flex1911-based common tree compatible with both 3.18/4.9 kernel setup, plus my own changes from previous builds.
Also rebased kernel to use reworked defconfig with CAF base updated to LA.UM.7.5.r1-04000-8x96.0 and Linux 3.18.131.
Switched to data-ipa-cfg-mgr from LA.UM.7.3.r1-06600-sdm845.0.
Updated mido stock blobs to MIUI Developer 8.11.8.
Updated audio CAF HAL to LA.UM.7.6.r1-03900-89xx.0.
Updated display CAF HAL to LA.UM.7.6.r1-03700-89xx.0.
Updated media CAF HAL to LA.UM.7.5.r1-04000-8x96.0.
Updated bluetooth and WLAN CAF HALs to LA.UM.7.4.r1-04100-8x98.0.
Updated dataservices HIDL and CAF SEPolicy to LA.UM.7.4.r1-04600-8x98.0.
Updated display interfaces to LA.UM.7.3.r1-06600-sdm845.0.
Updated libaudiopolicymanager to LA.UM.7.5.2.r1-00500-8x96.0.
02-12-2018 (UTC+8) – Experimental
Changelog for this release is skipped because it was a test over a new base that was dropped later. Moreover, I already forgot what I changed here. :silly:
20-11-2018 (UTC+8) – Experimental
Synced with XenonHD and LineageOS sources up to November 20, 2018 8:45 AM (UTC+8).
Android 9.0.0_r16 (November security patch)
Updated most of common blobs from tissot V9.6.7.0.ODHMIFE.
Updated audio, display, and media CAF HALs to LA.UM.7.6.r1-03400-89xx.0.
Updated CAF HIDLs to LA.UM.7.3.r1-05900-sdm845.0.
Switched and updated libaudiopolicymanager to LA.UM.7.3.r1-06300-sdm845.0 rather than using LineageOS' fork.
Merged CAF's SEPolicy changes from LA.UM.7.4.r1-03900-8x98.0.
Initial import of Dirac blobs.
Synced common tree with Flex's changes from tissot.
kernel: Updated to Linux 3.18.125 and LA.UM.7.6.r1-03400-89xx.0.
03-11-2018 (UTC+8) – Experimental
Synced with XenonHD and LineageOS sources up to November 3, 2018 12:00 AM (UTC+8).
Upstreamed audio, display, and media CAF HALs to LA.UM.7.6.r1-03100-89xx.0.
Upstreamed BT CAF HAL to LA.UM.7.4.r1-03600-8x98.0.
Upstreamed WLAN CAF HAL to LA.UM.7.4.r1-03800-8x98.0.
Removed VR service.
kernel: Updated to Linux 3.18.124 and LA.UM.7.6.r1-03100-89xx.0.
09-10-2018 (UTC+8) – Experimental
Synced with XenonHD and LineageOS sources up to October 9, 2018 8:00 AM (UTC+8).
Android 9.0.0_r10 (October security patch)
Various miscellaneous changes.
07-10-2018 (UTC+8) – Experimental
First Experimental build.

[SIZE=+1]Known issues[/SIZE]​
LineageOS issues

Awesome!
Few Screenies!
Bluetooth and Wifi works,
Manual Call recording is there,
Rom is smooth!

mido's back to the party

SS please

Another pie roms :good:
Mido's are partying i guess:victory:
This rom so god damn stable:good:
Thanks dev:angel:

i had to give krasCGQ some thumbs up. so i logged in. thats all i can afford right now. he has done a lot for our beloved mido. thanks a lot man !!!
now some rant... not directed towards anyone in particular
i would love a regularly updated not too clutterred oreo rom. using aex 8.1 for some months. now that is not being updated anymore. pie roms have some naggings issues. signal, bluetooth, volte or maybe sim selection, network locking, sim turn off option not working or missing... and a lot of other small things that hurt peace of mind (i must check for OCD lol). i also hate the performance profile selections of los and derived roms. i would like to do my own or would use spectrum. thats why i love clean roms.
by the way, what is the security patch date of this rom ?? does sim turn off and network/band locking manual mode work in it??

??

Good Efforts
Very Stable and Smooth
Thanks for this ROM DEV!!

Thank you dev, downloading now

Hey @krasCGQ I tried to install with encrypted data, and says that password was correct but data was damaged. But isn't true, I inmediatly rebooted to TWRP and was able to see my files.

thanks ?

Stack_Overflow said:
Hey @krasCGQ I tried to install with encrypted data, and says that password was correct but data was damaged. But isn't true, I inmediatly rebooted to TWRP and was able to see my files.
Click to expand...
Click to collapse
Encrypted storage isn't supported at this moment.
Sent from my ASUS_X00TD using XDA Labs

Is the security patch October?

Feels promising great ROM dev just installed ROM is smooth

Updates
Will be there more updates? I have test other roms yours and there are always fantastic. Thanks for a great job

antony felix said:
Is the security patch October?
Click to expand...
Click to collapse
Not yet. When it's merged, expect another build. It's merged, time to build. :silly:
jj27_6 said:
Will be there more updates? I have test other roms yours and there are always fantastic. Thanks for a great job
Click to expand...
Click to collapse
I'll maintain as long as I have resources to do so.
Sent from my ASUS_X00TD using XDA Labs

krasCGQ said:
Screen might take about a second to properly wake up. This is normal and nothing to worry about. This is due to our blobs.
Click to expand...
Click to collapse
Does that mean, we will always have this issue? Since our blobs are old and xiaomi is not going to update them!

Nikhil said:
Does that mean, we will always have this issue? Since our blobs are old and xiaomi is not going to update them!
Click to expand...
Click to collapse
I currently use SDM blobs from payton to resolve screen blinking issues with CAF's Pie display tag, at least until Pie firmware for devices with similar SoC with us start to pop up.
Sent from my ASUS_X00TD using XDA Labs

[Closed][Kernel] Orokin Prime Kernel for AOSP Android 11

Code:
/*
* By flashing this kernel, you understand that:
*
* You are flashing it on the right device.
* This kernel is flashed on a compatible ROM.
* I am not held responsible for any damage nor negative side effect that appears on your device.
This is a no-frills custom kernel for the Mi 9T and K20 designed to be used with the custom Android 10 ROMs. It's intended to be a simple alternative for the stock kernel that brings several under-the-hood enhancements.
Changelogs can be found in the second post of this thread.
Features:
Upstreamed with Linux and CAF tag
Compiled with Proton Clang by kdrag0n
Updated Energy Model and frequencies courtesy of kerneltoast and kdragon
K-Lapse support with recommended value hard-coded
Simple LMK, a custom low memory killer that improves memory management
GPU Boost
Debugging removed for increased performance
Credits:
osm0sis (for AnyKernel3)
kdrag0n (for a better compiler)
various devs for their help (Mi 9T devs and other devices, you know who you are)
Xiaomeme (because they are what they are)
Everyone else that I'm too lazy to call out on
Download link:
Removed
XDA:DevDB Information
Project Oberon, Kernel for the Redmi K20 / Xiaomi Mi 9T
Contributors
Watanabe_You
Source Code:
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2021-08-28
Created 2020-05-17
Last Updated 2021-08-28

Changelog:
August 28th 2021
Upstreamed F2FS
Upstreamed CAF to LA.UM.9.1.r1-10700-SMxxx0.QSSI12.0
Upstreamed kernel to 4.14.245
Fixed Little CPU boosting to max frequently
Fixed some minor errors during compile
Adjusted all frequencies for more efficiency
Under-the-hood fixes and optimizations
Older changelogs:
July 19th 2021
Updated for Android 11, if it works on Android 10 then let me know but I doubt it will.
Debugging removed
No more BSOD
Updated toolchain
Added some of the optimization codes
Boosted GPU and fingerprint stuff
Used effective frequencies, inefficient ones removed
Switched to Simple LMK for better memory management
March 14th 2021:
Updated to Linux Kernel 4.14.225
Updated CAF tag to LA.UM.8.1.r1-16900-sm8150.0
Removed more debugging
Reverted some changes for upstream kernel updates
Updated toolchain
Updated some of the optimization codes used
October 20th 2020:
Orokin-MiUI update will be on hold until I sort out a few issues
Orokin-AOSP:
Updated to Linux Kernel 4.14.200
Updated CAF tag to LA.UM.8.1.r1-16000-sm8150.0
Reworked Energy Model and frequencies for better efficiency
Removed more debugging for faster boot time
Updated ION and IOMMU
Device specific optimizations
Various under the hood changes
Built with updated Proton Clang
June 26th 2020:
Fixed random reboot issue
Orokin-AOSP:
Upstreamed Linux and CAF tag
Updated Simple LMK
Removed debugging code
Redo Simple LMK for better compatibility
Optimized Input Boost
Optimized cpuidle
Orokin-MiUI:
Upstreamed Linux and CAF tag
Reworked Simple LMK
Reworked CPU Input Boost
Relaxed Devfreq Boost frequency
Kernel-wide debugging removed
Improved fingerprint speed
Improved cpuidle power draw
June 1st 2020:
Fixed an issue where device boots into download mode
Reworked cpu input boost values
Disable debug configs
Fixed more build warnings for code stability
May 24th 2020:
Orokin:
Upstreamed Linux and CAF tag
Updated Simple LMK
Upstreamed F2FS
Added and tuned Devfreq Boost
CPU-specific optimization
Clean up ugly kernel name
Orokin-MiUI:
Added Simple LMK and Devfreq Boost
Upstreamed Linux and CAF tag
Upstreamed F2FS
Optimized for our device CPU
Switched to LZ4 compression
Various code fixes here and there
Upstreamed RCU for fast app launch
Enable Ultra Low-Power State
May 17th 2020:
Initial release

so it is the same as vantom kernel you didn't change much
thank you anyway for your work

Teslapela said:
so it is the same as vantom kernel you didn't change much
thank you anyway for your work
Click to expand...
Click to collapse
Yup, I'll be adding more when I get the time to.

any chance to core off and undervolting ?

wars045 said:
any chance to core off and undervolting ?
Click to expand...
Click to collapse
Nope, it won't be much of an improvement.

core off olsow?
volume bost?

I'd really appreciate audio level control if you are able to add it!

You can increase the charge current while charging faster?

Is it possible to overclock the device?

thi2812 said:
Is it possible to overclock the device?
Click to expand...
Click to collapse
No, it is already fast enough.
efr07 said:
You can increase the charge current while charging faster?
Click to expand...
Click to collapse
You need a good charger to hit faster charging, any modification isn't recommended.

Fingerprint doesnt work on latest Xiaomi.eu 20.05.21.
Wysłane z mojego Redmi K20 przy użyciu Tapatalka

bartosz066 said:
Fingerprint doesnt work on latest Xiaomi.eu 20.05.21.
Wysłane z mojego Redmi K20 przy użyciu Tapatalka
Click to expand...
Click to collapse
That is MiUI 12, all FOD are broken for custom kernels. Wait for xiaomeme to release a fix

Watanabe_You said:
No, it is already fast enough.
You need a good charger to hit faster charging, any modification isn't recommended.
Click to expand...
Click to collapse
I have a charger at 27w. Please make a modification for faster charging.

I have continuous restarts after starting the phone - coltos v5.9

wars045 said:
I have continuous restarts after starting the phone - coltos v5.9
Click to expand...
Click to collapse
Is that the ROM with Mi 9 FoD?
I'm troubleshooting that problem right now.

i dont know, how to check?

wars045 said:
i dont know, how to check?
Click to expand...
Click to collapse
Which kernel did you use?

vantom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

wars045 said:
vantom View attachment 5028057
Click to expand...
Click to collapse
Uh, please bring it up with the ROM developer and pray he talks to vantom about it.
If I ever find the cause I'll let him know, if someone unbans me from the telegram group.

[Note10 / +][KERNEL][12] NobodyKernel v2.0.7 [AOSP][RAMDISK][Exynos ONLY][18/01/2022]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NobodyKernel by MЯ.ИФБФDУ
for Samsung Galaxy Note10/+
N970F - d1
N975F - d2s
N976B - d2x
This Kernel is for AOSP ROMs with Kernel Ramdisk support only.
Supported ROMs:
v1.3.4 ( Android 11 ) EOL
Project Sakura by ExtraLib
Cherish OS by ExtraLib
LineageOS Official by Linux4
LineageOS Unofficial by Linux4
* Maybe more
v2.0.1+ ( Android 12 )
LineageOS 19.0 by Linux4
LineageOS 19.0 by Ivan_Meler
PixelExperience 12 by ExpressLuke
* Maybe more
Don't try to use it on Samsung OneUI, GSI, or any other ROM.
Exynos ONLY
IMPORTANT INFORMATIONS:
YOU UNDERSTAND THAT INSTALLING CUSTOM FIRMWARE/ROM/KERNEL IS AT YOUR OWN RISK!!!
YOUR WARRANTY CAN BE VOID.
I am not responsible for bricked devices, dead SD cards.
Kernel Features:
- Kernel 4.14.260
- Base U7GULD
- Clang 12.0.7
- CPU OC / UC
* Big OC 2912mhz
* Middle UC 377mhz
* Little UC 130mhz
- CPU UV
* UV -35
- CPU Scheduler
* nobody_sched ( default )
* blu_schedutil
* ondemand
* performance
- I/O Scheduler
* CFQ
* Noop
* Maple
* Fiops
* Sio
* Zen
* Anxiety ( default )
- Boeffla Wl Blocker
- Battery Saver mod
- CPU Mask ( disabled Freqvar )
- Idle optimization
- Perf optimization
- Pelt 8 ( stock is 16 )
- Moro Sound Module
- fsync switch
- CRC Control switch
- 200hz interrupt clock freq
- noatime mount option
- Wireguard v1.0.20211208
Kernel Link
G-Drive
ZImage Installer zip
You need to be on any default Kernel with Magisk of the supported ROMs above or on previous NobodyKernel
How to:
Instructions ( Linux4 ROMs )
- boot Lineage Recovery
- flash "NobodyKernel-AOSP-v......zip (latest)
- reboot to System
Instructions ( ExpressLuke ROMs )
- boot TWRP
- flash "NobodyKernel-AOSP-v......zip (latest)
- reboot to System
PayPal
MЯ.ИФБФDУ
Donations are not required, but they are very appreciated
osm0sis - for Image Kitchen Tool
corsicanu - for ZImage Installer Script
topjohnwu - for Magisk
linux4 - for Lineage Kernel Source
evdenis - for some mods and help
(Please tell me if i've forgotten someone)
Channel
Support Group​
Kernel Source
https://github.com/MrNobody206/android_kernel_samsung_exynos9820
Contributors
MЯ.ИФБФDУ
Version Information
Status: Stable
Stable Release Date: 2022-01-18
OS Version: Android 11
Kernel: Linux 4.14.xxx
Created 2021-08-24
Last Updated 2022-01-18

2022-01-18 v2.0.7
- upstream to 4.14.260
- update toolchain to Clang 12.0.7
- some other fixes
2022-01-17 v2.0.5
- Base U7GULD
- blocked NETLINK wakelock
- updated wireguard to v1.0.20211208
- enabled thermal
- removed Little CPU OC
- added support for d1, d2x (untested)
2021-12-28 v2.0.1
- initial Android 12 release
- Linux 4.14.253
2021-09-05 v1.3.4
- 200hz interrupt clock freq
- noatime mount option
- Wireguard v1.0.20210606
2021-09-03 v1.3.3
- updated to 4.14.245
- updated base to FUH3
2021-08-28 v1.3.2
- Clang 11.0.5
- added Moro Sound
- added fsync switch
- added CRC switch
2021-08-24 v1.3
- initial xda Release
( read features )
​

reserved...

Is there any part of Qualcomm? Which big guy transplants a Qualcomm?

Kernel Update
v1.3.2
Changelog:
- Clang 11.0.5
- added Moro Sound
- added fsync switch
- added CRC switch

[email protected] said:
Is there any part of Qualcomm? Which big guy transplants a Qualcomm?
Click to expand...
Click to collapse
No, never

Kernel Update
v1.3.3
Changelog:
- updated to 4.14.245
- updated base to FUH3

how can i install magisk .
every time i install magisk, it does not reboot . it hung on splash screen.
can some one please guide me step by step installing magisk

pnjboyzz said:
how can i install magisk .
every time i install magisk, it does not reboot . it hung on splash screen.
can some one please guide me step by step installing magisk
Click to expand...
Click to collapse
which ROM do you use?

Kernel Update
v2.0.1
Changelog:
- initial Android 12 release
- Linux 4.14.253
Don't try to flash it on Android 11. Latest Kernel for Android 11 is v1.3.4 and will be discontinued.

simonk206 said:
Supported ROMs:
v1.3.4 ( Android 11 ) EOL
Project Sakura by ExtraLib
Cherish OS by ExtraLib
LineageOS Official by Linux4
LineageOS Unofficial by Linux4
v2.0.1 ( Android 12 )
LineageOS 19.0 by Linux4
PixelExperience 12 by ExpressLuke
Click to expand...
Click to collapse
These ROMs support N976B. Can I use this kernel or even there it is limited to N975?

AOSP Kernel Update
v2.0.5
Changelog:
- Base U7GULD
- blocked NETLINK wakelock
- updated wireguard to v1.0.20211208
- enabled thermal
- removed Little CPU OC
- added support for d1, d2x (untested)
Don't try to flash it on Android 11. Latest Kernel for Android 11 is v1.3.4 and will be discontinued.

Vdm1 said:
These ROMs support N976B. Can I use this kernel or even there it is limited to N975?
Click to expand...
Click to collapse
limited to N975F. ( maybe i'll add support for other devices in future )
edit:
added support for N970F, N976B. It's untested so please test and report

And what about n976n 5g version

ochipapa said:
And what about n976n 5g version
Click to expand...
Click to collapse
No. And I didn't see an Android 12 AOSP ROM for your device anyway

What I mean is that does your rom one ui4 supports n976n 5g

ochipapa said:
What I mean is that does your rom one ui4 supports n976n 5g
Click to expand...
Click to collapse
You're in the wrong thread for that.
Please don't mix Oneui and AOSP threads

AOSP Kernel Update
v2.0.7 - AOSP - Ramdisk
Devices:
- N970F - d1
- N975F - d2s
- N976B - d2x
Changelog:
- upstream to 4.14.260
- update toolchain to Clang 12.0.7
- some other fixes
Don't try to flash it on Android 11. Latest Kernel for Android 11 is v1.3.4 and will be discontinued.

Thread closed per OP request.