Related
As the name suggests, I being a very smart person decided to flash a KDZ for the T-Mobile version at 25% battery. It either died during the flashing or wasn't going to work in the first place, about 80% through the flashing the screen went black and I was left with QHSUSB_BULK. The screen does not turn on, also while charging the LED doesn't turn on. Can anyone help me
P.S, I am with Wind
Did you tried entering the recovery mode?
,,
first of all, can you get back into download mode, or boot into safe mode at all? If so then it's definitely not a hard brick, which means that you might have some hope. So long as you can get it back into download mode, and if you're able to find an appropriate KDZ for your specific model (H636), it might be possible to undo the damage and get your device working again.
But from the sound of it, with the fact that your display doesn't come on, nor does your LED light, it sounds like it's a hard brick. Which means that you're now the proud owner of an LG branded paperweight. If you tried flashing the KDZ from the unbricking guide on the forums, it will only work if your device is already a US T-Mobile or MetroPCS model (H631 or MS631, respectively). Any other model (like the US Boost/Virgin/Cricket models, or non-US variants) will just result in failure, and ultimately a hard brick.
Mines also brick
Hello my lg g stylo also went hard bricked but mine's is a us how can i fix it do i have hope.
Hi I have a canadian LG G stylo (H636) with fido mobile. I want to install a custom ROM as I am sick of the stock ROM. I am pretty new to this area but very excited to learn. Could you provide me the steps and links to the files which I need for this. I appreciate your answers. THanks,
@nicegamer7 There is no known KDZ for the H636 -- you do have a hard bricked device.
@Mike238601 If you have a model that is in the unbrick thread, that has a KDZ available, you can save your device. If there isn't a KDZ available, then you probably have a brick.
Maybe this is useful
runningnak3d said:
@nicegamer7 There is no known KDZ for the H636 -- you do have a hard bricked device.
@Mike238601 If you have a model that is in the unbrick thread, that has a KDZ available, you can save your device. If there isn't a KDZ available, then you probably have a brick.
Click to expand...
Click to collapse
May be check this out for kdz files http://forum.xda-developers.com/android/development/read-trying-to-root-kdz-files-kdz-tmo-t3152531/
http://lg-firmwares.com/lg-h636-firmwares/
Sent from my LG-H636 using XDA-Developers mobile app
I saw a lot of place saying how to re-flash V10. but can't find the TOT file. i am thinking if H900 can flash with H901 firmware
Hello,
Problem : my phone randomly taps anywhere he likes to. random loss of network
Situation: After firmware update via Wi-Fi to marshmallow(6.0) from Lollipop (5.0) starter random network loss and quick depletion of the battery. Incidentally I broke my screen and had to replace it( screen was bought from ebay 60euros). After screen change started those random taping.
Fallowing .TOT guide (want to downgrade firmware) downloaded appropriate .tot file and .dll but system fails to check phone model and lg flashtool cant do anything. tried couple usb cables but result was the same.
I don't know if my phone is rooted or not or bricked or what....
Maybe someone knows is this is software or hardware problem or what ?
Thanks!
ssmikis said:
Hello,
Problem : my phone randomly taps anywhere he likes to. random loss of network
Situation: After firmware update via Wi-Fi to marshmallow(6.0) from Lollipop (5.0) starter random network loss and quick depletion of the battery. Incidentally I broke my screen and had to replace it( screen was bought from ebay 60euros). After screen change started those random taping.
Fallowing .TOT guide (want to downgrade firmware) downloaded appropriate .tot file and .dll but system fails to check phone model and lg flashtool cant do anything. tried couple usb cables but result was the same.
I don't know if my phone is rooted or not or bricked or what....
Maybe someone knows is this is software or hardware problem or what ?
Thanks!
Click to expand...
Click to collapse
Greetings and welcome to assist. The random taps sounds like a faulty digitiser when you replaced the screen, either it is faulty or just not connrected properly. If you want to change your rom try asking here
http://forum.xda-developers.com/lg-g3/help
and the experts there will guide you
Good Luck
Sawdoctor
I bought a V10 H901 in Aliexpress and the IMEI sayd that was a H901BK. It was with the T-Mobile software and Android 6 MM. In PC it said the H90121j and I wanted to upgrade to 7 Nougat and I put the phone in the PC and after the update with LG Bridge it just bricked. Died and do not back to life. I unbreacked my phone with this tutorial:
https://forum.xda-developers.com/att-lg-v10/help/lg-h900-unbrick-via-qfil-t3739309
The Unbrick H901 SD card didn't work, but this worked.
After that, I tried to install all H901 firmwares and didn't work. So I decided to install the H900 firmware and the phone finelly worked. It's working everything fine with no malfunction. Just the Android back to 6 MM, but with the AT&T apps.
I didn't understand nothing. My phone was a fake H901, because is a Refurbished phone. I'd like to install the Nougat update. Is it possible?
wesley_fg said:
I bought a V10 H901 in Aliexpress and the IMEI sayd that was a H901BK. It was with the T-Mobile software and Android 6 MM. In PC it said the H90121j and I wanted to upgrade to 7 Nougat and I put the phone in the PC and after the update with LG Bridge it just bricked. Died and do not back to life. I unbreacked my phone with this tutorial:
https://forum.xda-developers.com/att-lg-v10/help/lg-h900-unbrick-via-qfil-t3739309
The Unbrick H901 SD card didn't work, but this worked.
After that, I tried to install all H901 firmwares and didn't work. So I decided to install the H900 firmware and the phone finelly worked. It's working everything fine with no malfunction. Just the Android back to 6 MM, but with the AT&T apps.
I didn't understand nothing. My phone was a fake H901, because is a Refurbished phone. I'd like to install the Nougat update. Is it possible?
Click to expand...
Click to collapse
Just check at&t website= https://www.att.com/devicehowto/tut...bystep_KM1134561?make=LG&model=LGH900&gsi=oyB
at&t is just behind as always with updates. The other carriers like Verizon, T-mobile etc just push the updates to the devices without sim card or other crap steps
wesley_fg said:
I bought a V10 H901 in Aliexpress and the IMEI sayd that was a H901BK. It was with the T-Mobile software and Android 6 MM. In PC it said the H90121j and I wanted to upgrade to 7 Nougat and I put the phone in the PC and after the update with LG Bridge it just bricked. Died and do not back to life. I unbreacked my phone with this tutorial:
https://forum.xda-developers.com/att-lg-v10/help/lg-h900-unbrick-via-qfil-t3739309
The Unbrick H901 SD card didn't work, but this worked.
After that, I tried to install all H901 firmwares and didn't work. So I decided to install the H900 firmware and the phone finelly worked. It's working everything fine with no malfunction. Just the Android back to 6 MM, but with the AT&T apps.
I didn't understand nothing. My phone was a fake H901, because is a Refurbished phone. I'd like to install the Nougat update. Is it possible?
Click to expand...
Click to collapse
I have same exact problem with same refurbished phone h90121j I unbricked with the same method but I cant install AT&T software because LGUP says that I can't go from H901 to H900. I can flash any other H901BM firmware but my phone bricks again and again.
skytale1 said:
I have same exact problem with same refurbished phone h90121j I unbricked with the same method but I cant install AT&T software because LGUP says that I can't go from H901 to H900. I can flash any other H901BM firmware but my phone bricks again and again.
Click to expand...
Click to collapse
You'll probabilly need an Octopus box to reinstall the firmware. Try to find someone who can help you with that.
wesley_fg said:
You'll probabilly need an Octopus box to reinstall the firmware. Try to find someone who can help you with that.
Click to expand...
Click to collapse
I have opened the phone and find that the motherboard is from VS990 (Verizon). What a scam!
skytale1 said:
I have opened the phone and find that the motherboard is from VS990 (Verizon). What a scam!
Click to expand...
Click to collapse
Did you fix?
wesley_fg said:
Did you fix?
Click to expand...
Click to collapse
Yes. I have used this method to unbrick from 9008 mode and get download mode https://forum.xda-developers.com/att-lg-v10/help/lg-h900-unbrick-via-qfil-t3739309
Then extracted dz from AT&T H90021w.kdz using LGExtract.exe
And then flashed dz to phone via LGUP.
It's strange but AT&T firmware is only one that working in this case. On my phone without any bugs, fingerprint working, can install apps from play store etc. Only downside is that you will be stuck on Android Marshmallow but at least you'll get working phone.
scytalemk said:
Yes. I have used this method to unbrick from 9008 mode and get download mode https://forum.xda-developers.com/att-lg-v10/help/lg-h900-unbrick-via-qfil-t3739309
Then extracted dz from AT&T H90021w.kdz using LGExtract.exe
And then flashed dz to phone via LGUP.
It's strange but AT&T firmware is only one that working in this case. On my phone without any bugs, fingerprint working, can install apps from play store etc. Only downside is that you will be stuck on Android Marshmallow but at least you'll get working phone.
Click to expand...
Click to collapse
i followed your same method, mine was a tmobile h901 with korean mobof600l , no other firmware worked except this one, so now my tmobile became a at&t with bugs, fingerprint ,vpn, even imei is zero cant make calls, . i didnt use dz just the kdz directly and it work, can someone tell if using dz brings back the radio and fingerprint,
last gspian said:
i followed your same method, mine was a tmobile h901 with korean mobof600l , no other firmware worked except this one, so now my tmobile became a at&t with bugs, fingerprint ,vpn, even imei is zero cant make calls, . i didnt use dz just the kdz directly and it work, can someone tell if using dz brings back the radio and fingerprint,
Click to expand...
Click to collapse
Probably this method wont work on korean models without bugs. Not sure about kdz and dz. You can try.
Thank you so much!! I tried for a long time to restore the phone, finally the phone works, YOU ARE DIRECTLY HERO))
Good day everyone!
so i got an LG V20 for a sale price in AliExpress.
I bought the H910 variant, which is ATT
After 20 days on shipment, i got the phone as described, but after i did a little digging it turns out to be a confusing variant
Here's what i found:
> The phone boots with a Claro animation, Claro is from Puerto Rico, Right?
> on the "about device" the appearing model is an H910PR. PR is, again, puerto rico
> LG Bridge can't identify the model, will try soon on LGUP
To settle things, i looked up the hardware instead...but it just got more confusing
> I ordered an H910 ATT variant, the back label behind the battery of the phone also shows H910
> looked up the IMEI and it shows as H910 ATT LG V20, both IMEIs from the firmware and the back of the phone is the same
> i teardown the phone to look for the board model number of the device, and it says "VS995"...... the board is a Verizon variant
> again, i bought an ATT variant, the model says it is H910, but the back cover of the phone is written Verizon (i know it's not solid proof that this phone is Verizon or not cuz you can swap back covers, but still)
My purpose for this phone is to unlock and root it, but sadly i can't cuz i might end up bricking it for flashing the wrong stuff because of the confusing models
And even just restoring the firmware could be risky
So how can i root this phone?
Will DirtySanta work?
What firmware should i flash in case i need to restore it?
Any kind people out there to help would be greatly appreciated
MEMO#22 said:
Good day everyone!
so i got an LG V20 for a sale price in AliExpress.
I bought the H910 variant, which is ATT
After 20 days on shipment, i got the phone as described, but after i did a little digging it turns out to be a confusing variant
Here's what i found:
> The phone boots with a Claro animation, Claro is from Puerto Rico, Right?
> on the "about device" the appearing model is an H910PR. PR is, again, puerto rico
> LG Bridge can't identify the model, will try soon on LGUP
To settle things, i looked up the hardware instead...but it just got more confusing
> I ordered an H910 ATT variant, the back label behind the battery of the phone also shows H910
> looked up the IMEI and it shows as H910 ATT LG V20, both IMEIs from the firmware and the back of the phone is the same
> i teardown the phone to look for the board model number of the device, and it says "VS995"...... the board is a Verizon variant
> again, i bought an ATT variant, the model says it is H910, but the back cover of the phone is written Verizon (i know it's not solid proof that this phone is Verizon or not cuz you can swap back covers, but still)
My purpose for this phone is to unlock and root it, but sadly i can't cuz i might end up bricking it for flashing the wrong stuff because of the confusing models
And even just restoring the firmware could be risky
So how can i root this phone?
Will DirtySanta work?
What firmware should i flash in case i need to restore it?
Any kind people out there to help would be greatly appreciated
Click to expand...
Click to collapse
Sounds like you got a H910 with Claro firmware on it, could be a refurb phone
Sent from my LG-H910 using XDA Labs
I'm not surprised that the board says vs995, heck my first v20, a us996 I unlocked through LG (means it was indeed a legit unlocked us996, which I bought new) said vs995 on it inside. The single sim v20s are all nearly identical, mostly its just modem and cpu fuse configuration, note that we can't super easily change the actual modem config now that its actually assembled and fuses are popped, but there is some degree that modem firmware sorta works even with cross flashed firmware).
It might just be that the imei tool used couldn't bother to distinguish h910 and h910pr and just labeled them both ATT.
cnjax said:
Sounds like you got a H910 with Claro firmware on it, could be a refurb phone
Sent from my LG-H910 using XDA Labs
Click to expand...
Click to collapse
So is it ok if i flash a regular H910 firmware on this phone? and even use dirty santa?
Phoenix591 said:
I'm not surprised that the board says vs995, heck my first v20, a us996 I unlocked through LG (means it was indeed a legit unlocked us996, which I bought new) said vs995 on it inside. The single sim v20s are all nearly identical, mostly its just modem and cpu fuse configuration, note that we can't super easily change the actual modem config now that its actually assembled and fuses are popped, but there is some degree that modem firmware sorta works even with cross flashed firmware).
It might just be that the imei tool used couldn't bother to distinguish h910 and h910pr and just labeled them both ATT.
Click to expand...
Click to collapse
so basically LG is using the same single sim board but with different modems? That's something
Phoenix591 said:
I'm not surprised that the board says vs995, heck my first v20, a us996 I unlocked through LG (means it was indeed a legit unlocked us996, which I bought new) said vs995 on it inside. The single sim v20s are all nearly identical, mostly its just modem and cpu fuse configuration, note that we can't super easily change the actual modem config now that its actually assembled and fuses are popped, but there is some degree that modem firmware sorta works even with cross flashed firmware).
It might just be that the imei tool used couldn't bother to distinguish h910 and h910pr and just labeled them both ATT.
Click to expand...
Click to collapse
So would it be fine if i flashed a regular ATT firmware on this variant?
MEMO#22 said:
So would it be fine if i flashed a regular ATT firmware on this variant?
Click to expand...
Click to collapse
Most likely.
Att decided to be special snowflakes and did otas in a way that means theres no firmware files that can be flashed through the regular lg up/lgbridge tools though. So the best way imo to get att firmware is to downgrade to the dec 2016 security patch and root and grab an att rom. If you cant find an old enough h910pr firmware then just follow the regular h910 guide involving crossflashing to h910. Regardless I'd at least follow the bit about dumping your modem related files (because if anything is going to get funky, it will be the cell service)
MEMO#22 said:
So would it be fine if i flashed a regular ATT firmware on this variant?
Click to expand...
Click to collapse
Follow Phoenix's advice and back up your modem, others who flashed att firmware on the pr variant others had issues with cellular service, also you might want to verify what bands that variant supports to see if it will work with your carrier
Sent from my LG-H910 using XDA Labs
cnjax said:
Follow Phoenix's advice and back up your modem, others who flashed att firmware on the pr variant others had issues with cellular service, also you might want to verify what bands that variant supports to see if it will work with your carrier
Sent from my LG-H910 using XDA Labs
Click to expand...
Click to collapse
Will do, thank you all for your response