hi everybody, I just try to repair the WiFI fix in my Zenfone V520KL, using the method described by the partner IDLeon, in the first way to put the phone in EDL mode, it indicates the following
Short guide.
1. You need be in EDL mode with installed drivers (Qualcomm HS-USB QDloader 9008).
I know 2 ways to do it.
a) Flash V520KL_all_WW_eng_T3.3.15 by AFT and reboot to EDL by adb command (adb reboot edl)
or
b)Use EDL cable.
I try to flash this archibe with AFT but the program tells me to set FRP Account, now that's? and where you get that key?
please help me, I don´t find nothing about that
Thank in advance
mi a3 hard bricked detects in edl mode. what to do next ?
Hey guys, i´m trying to access my phone via EDL mode.
I am able to enable the EDL Mode by shorting the board pins, the COM Port is correct (Qualcomm HS-USB QDLoader 9800), but the phone wont turn on when in EDL mode, i dont know if this is correct or not. It boots ok in normal mode.
I cant find a programmer either, i could find "prog_emmc_firehose_Sdm660" but i think the Note 6 Pro is "Sdm 636", not sure.
Any help?
Thanks
please read title and help
restore it with msm tool
how to connect the phone screen is black
If the screen is black it may already be in EDL mode. Plug it into a computer and check device manager for something like "Qualcomm HS-USB QDLoader." If that's there, you just need to get the MSM Tool for your model and make sure you have the right drivers.
If you can't get it into EDL mode, you will have to file a warranty claim with OnePlus, no other choice. Mess around with the buttons and see if you can get it to reboot or try the EDL key combo (hold volume up and down and while holding plug in the USB cable that's plugged into the computer). You don't have a chance of repairing it yourself if you can't get into EDL, end of story.
pc recognizing this Qualcomm HS-USB QDLoader in device manager but in msm tool it is showing n/a.and also in device manager it is showing triangle error on device.i am using official driver provided by msm tool poster.
Need some help unbricking (solved)
I bricked my OP9 doing some stuff today. It will not turn on, access bootloader, or anything. When I plug it into my computer, it makes a connecting sound, waits 10 seconds, then disconnect sound, then repeats the process. I tried using MSM...
forum.xda-developers.com
It's can help you
Well you're not the only one I guess. That happened to me as well. So perhaps, Alhamdulillah I can help you out
The screen still remains black that means your phone is in the EDL and you'll need to get it out of it and then get back to EDL again to use msm.
Anyway, hold the power + volume up + down all simultaneously for a while. It'll take you to the Fastboot mode. Don't worry, it definitely will take you to the Fastboot mode.
Then you can do the rest of the flashing as you wish
Hi,
I have tried to put a working Sony Xperia Tipo in EDL mode by the following:
- Rebooting into fastboot mode with "adb reboot fasboot". It just reboots the device in standard mode.
- Running "reboot fastboot" from a root shell also reboots to the normal mode.
- Shorting green and black cables in a USB cable. It also boots to standard mode.
It seems the only missing way to enter EDL mode is by shorting the test contacts in the motherboard.
Does somebody know which points need to be short, or can suggest another way to enter EDL?
Thanks.