S6 Stuck at Samsung Logo Odin doesn't recognize Smartphone - Galaxy S6 Q&A, Help & Troubleshooting

Hello XDA Members!
I have a Problem with my Samsung Galaxy S6.
Whenever i try to boot it, i'm stuck at the Samsung logo and when i try to reflash the Firmware with Odin Windows says that the device could not be recognized. (I attached a screenshot of the error message it's german unfortunately, sorry for that.)
I also entered the (stock) recovery and wiped everything and also tried the "apply update from ADB" option to test if my PC would recognize my S6 then. Same error message.
What i've tried already:
- Reinstalling the USB drivers multiple times.
- Installing Smart Switch & Kies
- Cleaning the micro USB port of my S6 to check if there's any dirt inside
- Trying multiple USB Ports of my PC (USB 2.0 & 3.0)
I'm out of options right now and wanted to ask you guys if you could help me!
Thanks in advance & greetings from Germany! :highfive:

picohehe said:
Hello XDA Members!
I have a Problem with my Samsung Galaxy S6.
Whenever i try to boot it, i'm stuck at the Samsung logo and when i try to reflash the Firmware with Odin Windows says that the device could not be recognized. (I attached a screenshot of the error message it's german unfortunately, sorry for that.)
I also entered the (stock) recovery and wiped everything and also tried the "apply update from ADB" option to test if my PC would recognize my S6 then. Same error message.
What i've tried already:
- Reinstalling the USB drivers multiple times.
- Installing Smart Switch & Kies
- Cleaning the micro USB port of my S6 to check if there's any dirt inside
- Trying multiple USB Ports of my PC (USB 2.0 & 3.0)
I'm out of options right now and wanted to ask you guys if you could help me!
Thanks in advance & greetings from Germany! :highfive:
Click to expand...
Click to collapse
try to reconnect with a different usb port and cable even try on a different pc/laptop

sakib98islam said:
try to reconnect with a different usb port and cable even try on a different pc/laptop
Click to expand...
Click to collapse
Tried both, the other PC i've tried didn't had the Samsung Drivers installed though. I don't have access to that PC that often because it's the PC of a friend of mine.
I really run out of ideas right now.

picohehe said:
Tried both, the other PC i've tried didn't had the Samsung Drivers installed though. I don't have access to that PC that often because it's the PC of a friend of mine.
I really run out of ideas right now.
Click to expand...
Click to collapse
does the phone boot into recovery or download mode

sakib98islam said:
does the phone boot into recovery or download mode
Click to expand...
Click to collapse
When i boot it, it goes into update mode (picture attached) and this results in a a "no command" screen (also attached).
I can get to the Samsung Logo by choosing the option "Reboot to bootloader" or "Reboot System now" at the Recovery screen.
But then it gets stuck at the Samsung Logo.
I'm guessing that something is messed up here and i would reflash everything via Odin but i just can't get the phone to be recognized by the PC.
Really silly situation.

sakib98islam said:
does the phone boot into recovery or download mode
Click to expand...
Click to collapse
Sorry i forgot to attach the pictures, here they are.

picohehe said:
Sorry i forgot to attach the pictures, here they are.
Click to expand...
Click to collapse
try holding down all the buttons for a couple of seconds

sakib98islam said:
try holding down all the buttons for a couple of seconds
Click to expand...
Click to collapse
Sorry i think you didn't get me correctly.
I've already been in the download mode, but Windows doesn't recognize my S6 if I'm in this mode.
And when i start my phone normally via the power button, these 2 screens that i posted above appear.
Sorry for the confusion.

picohehe said:
Sorry i think you didn't get me correctly.
I've already been in the download mode, but Windows doesn't recognize my S6 if I'm in this mode.
And when i start my phone normally via the power button, these 2 screens that i posted above appear.
Sorry for the confusion.
Click to expand...
Click to collapse
im not too sure on what else it could be sorry

Related

Problem during the root of Samsung Galaxy S2

Hi everyone,
I tried to root my Samsung Galaxy following the guide from xda developers (http://forum.xda-developers.com/showthread.php?t=1056334).
I forgot to enable the USB debugging mode on the device (Settings -> Applications -> Development -> USB debugging)
I started ODIN, then my device rebooted. I started SuperOneClick and I received a message saying "device not found".
Then I went to check the guide, and I saw that I forgot to enable the USB debugging mode on the device (Settings -> Applications -> Development -> USB debugging).
Can anyone help me to fix this?
I'm from Portugal. If I wrote anything wrong sorry for my mistake and for any inconvenience.
Thank you for any help.
Not sure if you're just having problems with Odin recognizing your phone or not but the basics are to ensure you have the phones drivers installed and enable usb debugging. Afterwards you make sure your phone gets recognized fully from your computer once plugging it in. If so you start Odin AND THEN plug in your phone with the directions for getting to download mode (removing battery and holding volume button etc) and in Odin it should show a connection on a com port tile. Then you load up your files and send them. If anything I am sure you just may have a problem by not being in download mode?
Sent from my SGH-T989 using xda premium
Do you have the latest drivers? Have you killed all KIES apps?
hompsar said:
Not sure if you're just having problems with Odin recognizing your phone or not but the basics are to ensure you have the phones drivers installed and enable usb debugging. Afterwards you make sure your phone gets recognized fully from your computer once plugging it in. If so you start Odin AND THEN plug in your phone with the directions for getting to download mode (removing battery and holding volume button etc) and in Odin it should show a connection on a com port tile. Then you load up your files and send them. If anything I am sure you just may have a problem by not being in download mode?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
The only thing that my device do it's when I press power on it appears the image of samsung galaxy and the yellow triangle above. It doesn't do anything more. it is blocked on that image. I can ear in my computer the sound of some device plugged to the usb port, but don't detect any device. It only makes the sound of some device that was plugged to the usb port.
But I can put my device in download mode. What files I have to send? but I don't know what files I should send to the device. Can you please help me?
What I have to do in odin?
thanks
heretix said:
Do you have the latest drivers? Have you killed all KIES apps?
Click to expand...
Click to collapse
I have the latest drivers from my cell phone operator. I can only have access to Kies on my pc (but now, kies doesn't recognize any device plugged to the pc), my phone don't let me gain access to the menu and to any application.
Get into download mode and go into keis and start a firmware upgrade and initialization. (you will need model number and serial number behind the battery) and go through the process it tells u to. Then you will be back to stock, then try to root from there the proper way.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
utahst8 said:
Get into download mode and go into keis and start a firmware upgrade and initialization. (you will need model number and serial number behind the battery) and go through the process it tells u to. Then you will be back to stock, then try to root from there the proper way.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
I did what you said, I get into download mode, then pressed the volume up key to continue. I started KIES on PC and it doesn't recognize any phone plugged in USB port. I tried to start the firmware upgrade and initialization and then KIES show me the message: "GALAXY SII (GT-I9100) does not support initialization".
Any suggestion o fix this?
Thanks for the help.
mrmister2010 said:
I did what you said, I get into download mode, then pressed the volume up key to continue. I started KIES on PC and it doesn't recognize any phone plugged in USB port. I tried to start the firmware upgrade and initialization and then KIES show me the message: "GALAXY SII (GT-I9100) does not support initialization".
Any suggestion o fix this?
Thanks for the help.
Click to expand...
Click to collapse
What carrier are you going through? Some of the carriers the phones wont do this in keis
utahst8 said:
What carrier are you going through? Some of the carriers the phones wont do this in keis
Click to expand...
Click to collapse
I don't know what you mean with "carrier".
Is there any chance to copy a tar file with ODIN that let me gain access to the cell phone?
beacuse this happened when I use Odin to copy the XWKDD_insecure.tar to the phone.
thnaks for the help.
mrmister2010 said:
The only thing that my device do it's when I press power on it appears the image of samsung galaxy and the yellow triangle above. It doesn't do anything more. it is blocked on that image. I can ear in my computer the sound of some device plugged to the usb port, but don't detect any device. It only makes the sound of some device that was plugged to the usb port.
But I can put my device in download mode. What files I have to send? but I don't know what files I should send to the device. Can you please help me?
What I have to do in odin?
thanks
Click to expand...
Click to collapse
You could find a stock ROM first (depends on where you bought your phone / country, provider) and flash through Odin. Unplug your phone from your PC > task manager > kill all KIES apps > turn on your phone into download mode > open ODIN > connect phone to PC
Then ODIN should show your phone is connected with a yellow box, depending on what ROM you downloaded you put the needed file in the PDA box (file with the name such as I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME.tar.md5), click START and wait until that box goes from yellow to green. Phone should reboot now. If it gets stuck, get into the recovery mode (Vol UP + home + power) and wipe everything.
+1
Sent from my SGH-T989 using xda premium
heretix said:
You could find a stock ROM first (depends on where you bought your phone / country, provider) and flash through Odin. Unplug your phone from your PC > task manager > kill all KIES apps > turn on your phone into download mode > open ODIN > connect phone to PC
Then ODIN should show your phone is connected with a yellow box, depending on what ROM you downloaded you put the needed file in the PDA box (file with the name such as I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME.tar.md5), click START and wait until that box goes from yellow to green. Phone should reboot now. If it gets stuck, get into the recovery mode (Vol UP + home + power) and wipe everything.
Click to expand...
Click to collapse
Thanks a lot. Done and fixed. It's all ok now.
Thank you very much.
No problem mate, as long as it works.
Sent from my GT-I9000 using Tapatalk 2
Forgot to enable usb debugging while flashing, got s2 bricked
heretix said:
You could find a stock ROM first (depends on where you bought your phone / country, provider) and flash through Odin. Unplug your phone from your PC > task manager > kill all KIES apps > turn on your phone into download mode > open ODIN > connect phone to PC
Then ODIN should show your phone is connected with a yellow box, depending on what ROM you downloaded you put the needed file in the PDA box (file with the name such as I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME.tar.md5), click START and wait until that box goes from yellow to green. Phone should reboot now. If it gets stuck, get into the recovery mode (Vol UP + home + power) and wipe everything.
Click to expand...
Click to collapse
Hi,
me too dug deep into the same situation, but when i followed the above step,it didnt get fixed only difference was my yellow triangle got disappeared but still bricked.i did factory reset and cache wipe , no help.
Phone Info:-
S2 - India
stock rom XWKE8 GingerBread
Forgot to enable USB Debugging( since got carried away with my concentration on fixing usb drivers with kies) while doing my first rooting.
i am able to goto download mode and recovery mode as well.
Please do provide me with suggestions..
Regards
Newbie
Galaxy GT-S5660 GIO break
newbie24 said:
Hi,
I have (had ) samsung galaxy gio, i tried to root it then install android 4.2.
1- I forgot to set "Debugging mode" on from the setting.
2- During upgrading from zip file from SD card, battery finished (I know I screwed it up, that day was terrible).
phone does not work. when i turn it on, i have got double boot logos "Galaxy Gio GT-S5660". i mean two startup logo alongside eachother on the top of screen in decreased size. and phone hang on this state. when i try (power + home button) i get normal recovery mode with android sign and alert sign in triangle.
of course any help will be appreciated.
Click to expand...
Click to collapse

[Q] Problem rooting GT-P5110

I'm trying to root a GT-P5110 with Android version 4.2.2 following the instructions at http://forum.xda-developers.com/showthread.php?t=1980683
Odin seems to be running ok, but Odin doesn't seem to be able to detect my device.
When I boot into recovery mode, I have a menu on the screen with the items "reboot system now", "apply update from adb", "apply update from external storage", "wipe data/factory reset", "wipe cache partition", and apply update from cache". Do I need to select one of them? I took a gamble on "apply update from adb", but Odin still doesn't see the device.
Can anybody give me any hints on what to try next?
Thanks,
digitig said:
I'm trying to root a GT-P5110 with Android version 4.2.2 following the instructions at http://forum.xda-developers.com/showthread.php?t=1980683
Odin seems to be running ok, but Odin doesn't seem to be able to detect my device.
When I boot into recovery mode, I have a menu on the screen with the items "reboot system now", "apply update from adb", "apply update from external storage", "wipe data/factory reset", "wipe cache partition", and apply update from cache". Do I need to select one of them? I took a gamble on "apply update from adb", but Odin still doesn't see the device.
Can anybody give me any hints on what to try next?
Thanks,
Click to expand...
Click to collapse
try latest usb samsng drivers
also if you are on win 8.1 then it might be a problem cos in win 8.1 odin is not recognizing nor my tab or phones[ ace and grand duos}
but install latest usb drivers it might work
aditya rathee said:
try latest usb samsng drivers
also if you are on win 8.1 then it might be a problem cos in win 8.1 odin is not recognizing nor my tab or phones[ ace and grand duos}
but install latest usb drivers it might work
Click to expand...
Click to collapse
The drivers seem to be up-to-date (I installed them from the Samsung website yesterday. I'm using Windows 8 (not 8.1, which won't play nicely with my laptop) so maybe that's the problem. Time to dig out an older computer, perhaps.
digitig said:
The drivers seem to be up-to-date (I installed them from the Samsung website yesterday. I'm using Windows 8 (not 8.1, which won't play nicely with my laptop) so maybe that's the problem. Time to dig out an older computer, perhaps.
Click to expand...
Click to collapse
try vmware ! with windows 7
download mode
i think your going. to recovey .try. pressing power+volume down.the your gonna get to th e download.its whre odin will flash
dharisd2 said:
i think your going. to recovey .try. pressing power+volume down.the your gonna get to th e download.its whre odin will flash
Click to expand...
Click to collapse
I am pressing power + volume down. I agree that the menu doesn't look like the one described.
(Incidentally, why do we need a captcha to post when we're logged in? I had to run through about 30 before I could find one I could even attempt, and the audio ones are even harder to decipher!)
You are doing it wrong.
Power on and push the volumebuton ( on the same time ) to the right.( UP )..and keep it that way til it boots up.
Than you get this screen
Then push the volumebuton to the left ( DOWN ), and then you are good to go
anabhi said:
try vmware ! with windows 7
Click to expand...
Click to collapse
Bro can you tell me what is the use of vmalware here the person is asking for help in rooting
aditya rathee said:
Bro can you tell me what is the use of vmalware here the person is asking for help in rooting
Click to expand...
Click to collapse
his pc isn't able to detect device(driver) ! winodows 8 have some driver installation issue ! that's why am saying vmware or virtual machine with win7 !
anabhi said:
his pc isn't able to detect device(driver) ! winodows 8 have some driver installation issue ! that's why am saying vmware or virtual machine with win7 !
Click to expand...
Click to collapse
That doesn't changes the way on how to come in the menu's of his tablet.
anabhi said:
his pc isn't able to detect device(driver) ! winodows 8 have some driver installation issue ! that's why am saying vmware or virtual machine with win7 !
Click to expand...
Click to collapse
But we can install sam usb drivers with compatibility settings i also do that
Odin will only flash when the device is in download mode. Flashing via recovery requires that you flash via .zip
Connection issue with GT P5110?!
Hi Guys,
trying to stick CWM on my gt 95110. got it into download mode but windows is no recognising the device? Have installed and reinstalled the drivers many time but nothing works. I've used different cables, run odin as admin.
Running on Windows 7
Please help!
If you have Kies installed try removing Kies from pc, restart pc, reload Samsung drivers then with Odin started hook up tab to pc.
If not recognized still, while tab is still plugged to pc reboot tab, it should do it.
Pp.
Already tried that and have just tried again. No luck
More info, what rom, what recovery what Odin. Is tab working properly.
Did you try a factory reset?
Pp.
It's the most recent version of odin I could find. I'll check the version number late when I get home later. With recovery do you mean cwm or the stock recovery on the tab?
I have restored tab to factory settings and tried what you suggested again this morning. Windows keeps on saying unrecognised device your device may have a fault. Can't see why this is the first time I've ever connected it to a pc since I got it. Tried every combination of kies and drivers installed and un-installed. Been through all the windows help suggestions. Have contacted samsung support but they take a lot longer to respond than the good people on xda.
Chezgals said:
It's the most recent version of odin I could find. I'll check the version number late when I get home later. With recovery do you mean cwm or the stock recovery on the tab?
I have restored tab to factory settings and tried what you suggested again this morning. Windows keeps on saying unrecognised device your device may have a fault. Can't see why this is the first time I've ever connected it to a pc since I got it. Tried every combination of kies and drivers installed and un-installed. Been through all the windows help suggestions. Have contacted samsung support but they take a lot longer to respond than the good people on xda.
Click to expand...
Click to collapse
Many times this is a bad cable or USB port on the computer. You might try changing those just to make sure. Then if that doesn't help you might even have to change computers.
Try a different cable, try a different pc.
Have seen cable that works with charger but not with pc.
Pp.
Thanks, have tried 2 cables. One was the original cable that's been in the box since I first got it. Have tried all usb slots and will try my girlfriends laptop tomorrow. I'll let you know how it goes.
I've also got a support ticket open with Samsung and they have offered a remote support session to try to resolve. Anyone had any experience with them? Hopefully one of these would resolve this.

Ultra Hard Bricked OPO

Hey guys how are you?
Well a friend gave me an OPO that is really bricked.
Seems like it went to 0% of battery. I charged it to 100% but it does not boot. It stays in loop with the "cyanogen" logo
I tried every solution in every "hard brick resolution" thread.
Instaled ColorOS drivers, Samsung drivers, etc etc etc. nothing works, why? Well..
When i plug the phone on my computer, its recognized has MTP device. The "update driver" option is disabled. Its never recognized as qhsusb_bulk our adb or anything.
It does not seems to enter in fastboot mode ether, has i press vol up + power and it goes to the cyanogen logo again.
Im trying to do this recovery with an windows 10 64bit computer.
I tried to install qualcomm drivers also, but not compatible with my OS.
Not really sure what to do next..
I had the same issue. Tried VOLUME+DOWN multiple times until it worked and showed up as "QHSUSB_BULK" and then used the OnePlusRestoreTool to unbrick the phone.
Manually selected these drivers for Windows 10 64bit through the Device Manager here:
Qualcomm HS-USB QDLoader 9008 2.1.0.5
x86: http://download.windowsupdate.com/ms...af53d237ff.cab
x64: http://download.windowsupdate.com/ms...ac311facc0.cab <-------- this one if you are on 64bit Windows 10
http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Good luck.
hea9vy said:
I had the same issue. Tried VOLUME+DOWN multiple times until it worked and showed up as "QHSUSB_BULK" and then used the OnePlusRestoreTool to unbrick the phone.
Manually selected these drivers for Windows 10 64bit through the Device Manager here:
Qualcomm HS-USB QDLoader 9008 2.1.0.5
x86: http://download.windowsupdate.com/ms...af53d237ff.cab
x64: http://download.windowsupdate.com/ms...ac311facc0.cab <-------- this one if you are on 64bit Windows 10
http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Good luck.
Click to expand...
Click to collapse
Thank you! But the download links aren't working
cheveux_ said:
Thank you! But the download links aren't working
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=58145465&postcount=48
You can find them in the post above. :fingers-crossed:
hea9vy said:
http://forum.xda-developers.com/showpost.php?p=58145465&postcount=48
You can find them in the post above. :fingers-crossed:
Click to expand...
Click to collapse
yeah i searched and downloaded the x64 version of qualcomm
But i tried 20 something times to power on the mobile phone with vol up and no luck. still appears in the device manager as MTP device
Steps im taking:
1- Connect the phone with USB cable. Its starts charging.
2-let the screen go off then power + vol up. I let go power button has soon as the phone vibrates.
3-goes to cyanogen log and appears on the device manager as mtp usb device
tried that for 20 times
cheveux_ said:
yeah i searched and downloaded the x64 version of qualcomm
But i tried 20 something times to power on the mobile phone with vol up and no luck. still appears in the device manager as MTP device
Steps im taking:
1- Connect the phone with USB cable. Its starts charging.
2-let the screen go off then power + vol up. I let go power button has soon as the phone vibrates.
3-goes to cyanogen log and appears on the device manager as mtp usb device
tried that for 20 times
Click to expand...
Click to collapse
Try it on a native USB port, so try different ports. Or if you have access to more than one pc/laptop try it on different ones.
I had the same issue a couple of months ago on my wife's oneplus. Spent an hour on my laptop and no go. Fired up the desktop and worked first time.
cheveux_ said:
yeah i searched and downloaded the x64 version of qualcomm
But i tried 20 something times to power on the mobile phone with vol up and no luck. still appears in the device manager as MTP device
Steps im taking:
1- Connect the phone with USB cable. Its starts charging.
2-let the screen go off then power + vol up. I let go power button has soon as the phone vibrates.
3-goes to cyanogen log and appears on the device manager as mtp usb device
tried that for 20 times
Click to expand...
Click to collapse
Read the answers that people give you " Tried VOLUME+DOWN " , did you try that ?
Cholerabob said:
Read the answers that people give you " Tried VOLUME+DOWN " , did you try that ?
Click to expand...
Click to collapse
Yes. i Tried both :/
1st thing if it shows the cyanogen logo its not hard brick as per my knowledge.
Yes as suggested try different ports.
hea9vy said:
I had the same issue. Tried VOLUME+DOWN multiple times until it worked and showed up as "QHSUSB_BULK" and then used the OnePlusRestoreTool to unbrick the phone.
Manually selected these drivers for Windows 10 64bit through the Device Manager here:
Qualcomm HS-USB QDLoader 9008 2.1.0.5
x86: http://download.windowsupdate.com/ms...af53d237ff.cab
x64: http://download.windowsupdate.com/ms...ac311facc0.cab <-------- this one if you are on 64bit Windows 10
http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Good luck.
Click to expand...
Click to collapse
hi. my friend. will this work for a 100% bricked? the phone cannot even show anything on screen
Sent from my ONE A2003 using Xparent BlueTapatalk 2
https://m.youtube.com/watch?v=O2_x9SnJ1Ak
This guide helped me in getting my dead opo back....
sanjeev7 said:
https://m.youtube.com/watch?v=O2_x9SnJ1Ak
This guide helped me in getting my dead opo back....
Click to expand...
Click to collapse
not working for me.
my PC cannot detect my opo
Sent from my ONE A2003 using Xparent BlueTapatalk 2
Can you get to fastboot?
evertking said:
Can you get to fastboot?
Click to expand...
Click to collapse
no. 100%bricked. go see the YouTube link above my pervious post
Sent from my ONE A2003 using Xparent BlueTapatalk 2
thx. my opo is un bricked. but now back to the problem before I bricked it.
the phone baseband is unknown (no efs save)
and the opo keeps rebooting every few second. is there a way to fix it?
Sent from my ONE A2003 using Xparent BlueTapatalk 2
So still no luck.
I have no fastboot and no recovery.
Has i connect the cable, it starts to charge.
If i click vol up + power it goes to the cyanogen logo and stays there...forever..
The problem is it is always recognized has "mtp device". I'm using an windows xp installation now...
Send me a PM and I'll try to help you!
Jeffrey98 said:
Send me a PM and I'll try to help you!
Click to expand...
Click to collapse
I think i can't send you messages, so here it goes
Hey Jeffrey! Has you asked, here is the pm.
So, in advance, thanks for your help. font know if this can be solved but its nice having someone interested in helping.
So, what i have:
- An OPO that doesn't boot.
- When i press the power button, it shows the one plus logo, and then the cyanogen logo, staying there forever..
- When i press vol up + power, it does the exactly same thing, never entering fastboot
- When i press vol down + power, it does the same thing. never entering recovery
I've prepared an old notebook with windows xp to unbrick the opo. Its completly clean.
The phone is always recognized has mtp device. I've installed all drivers on the internet. ColorOS, samsung, qualcomm, etc etc, everything. nothing works has its never detected in msm8974 or anything.
what can i do?
Thanks in advance
This might help!
If nothing works email oneplus and request for a remote session i did that and they flashed the os, and ps. while doing that they will tell you to download some files and in that some will be password protected and after completing the process they will delete the file so that we cant use it. If possible, after installing drivers they will tell u to reboot the system and log in back but after rebooting just copy the file to another place and then log in back so they can continue the process. Those files may be helpful for a lot of people.I have attached screen shots. Never mind the first folder, the remaining zip files are to be downloaded and in that two are password protected.

[Completed] HELP me unbrick my GT-I9300

Hello xda members
I have an GT-I9300 device which stucks on TWRP Recovery (teamwin logo excatly) and flashes about after 4 or 5 seconds.
No twrp options , my pc doesnt react when i plug in my phone , only download mode available and an SD Card.
Can i unbrick my phone or not ?
Hello,
Yes, you can flash your stock firmware through Odin 3.10 and fix your device. Look in the thread linked below for instructions, if the download link for your stock firmware is dead then try going to Sammobile.com and search for your stock firmware using your model number GT-I9300, download it and then follow the instructions below.
http://forum.xda-developers.com/galaxy-s3/general/restore-to-stock-rom-galaxy-s3-i9300-t2187081
Good luck.
styno said:
Hi,
you can recover the GT-I9300 completely with Samsung's own Kies. It will ask for the serial number of the phone and will download all files needed and flash it for you.
You'll end up with a complete stock phone (but with latest modem )
Good luck!
Click to expand...
Click to collapse
Kies and Odin dont recognize my device
Any other suggestions?
Edixh said:
Kies and Odin dont recognize my device
Any other suggestions?
Click to expand...
Click to collapse
Have you verified that your drivers are installed correctly?
Post your issue in the forum I gave you the link to.
Droidriven said:
Have you verified that your drivers are installed correctly?
Post your issue in the forum I gave you the link to.
Click to expand...
Click to collapse
Yes bro i have installed them so many times and restarted PC but nothing happens when i plug in my device
styno said:
Just to be sure: you used kies3 - emergency recovery and got the phone into download mode?
Click to expand...
Click to collapse
Yes but kies and also kies3 doesnt start the process .
TDizzle329 said:
Are you putting the device into download mode?
Power the device off (pull the battery, then put the battery back in), then hold VOL DOWN + HOME KEY + POWER KEY
Once in download mode plug into your PC. Also make sure that you have the Samsung drivers installed. Check your device manager on your PC to make sure Windows is seeing the device.
Click to expand...
Click to collapse
I have done that but my pc doesnt even show any signs of my phone when i plug it in.
I looked at Device Manages also
Edixh said:
I have done that but my pc doesnt even show any signs of my phone when i plug it in.
I looked at Device Manages also
Click to expand...
Click to collapse
Try different USB ports, make sure you have the stock cable.

PLEASE HELP ME samsung galaxy note 4 ISSUE

Hi guys,
Please help me my note 4 n910c just got updated to Marshmellow 6.0
and after the update the fast charging is not working
I have tried everything I also have an s7 and that shows fast charging but my phone doesnt show fast charging
its taking 6 7 hours and its still 60 percent
i also did a factory reset no solution
then i thought of downgrading TO LOLLIPOP 5.1.1 would solve the solution
So i tried to connect my note 4 to pc it wont connect to pc
it says not recognised
but my other phones do get connected
all my drivers are updated and tried everything but nothing is happening
so i thought maybe it would connect to odin in download mode but it wont show up
Now help me please of what to do
if i normally use the 6.0 it wont fast charge and if i want to downgrade it wont connect to odin
HELP MEEEE IM HELPLESS
PLEASE TELL ME if i can flash the old lollipop 5.1 some other way than connecting to odin
or is there any other way to downgrade?
Please someone who knows comment and let me know ASAP
5arhan said:
Hi guys,
Please help me my note 4 n910c just got updated to Marshmellow 6.0
and after the update the fast charging is not working
I have tried everything I also have an s7 and that shows fast charging but my phone doesnt show fast charging
its taking 6 7 hours and its still 60 percent
i also did a factory reset no solution
then i thought of downgrading TO LOLLIPOP 5.1.1 would solve the solution
So i tried to connect my note 4 to pc it wont connect to pc
it says not recognised
but my other phones do get connected
all my drivers are updated and tried everything but nothing is happening
so i thought maybe it would connect to odin in download mode but it wont show up
Now help me please of what to do
if i normally use the 6.0 it wont fast charge and if i want to downgrade it wont connect to odin
HELP MEEEE IM HELPLESS
PLEASE TELL ME if i can flash the old lollipop 5.1 some other way than connecting to odin
or is there any other way to downgrade?
Please someone who knows comment and let me know ASAP
Click to expand...
Click to collapse
Have you tried uninstalling all the USB drivers for your device, restarting PC, re-installing drivers then restart PC and then try connecting your device.
When you updated, did you boot to stock recovery and factory reset and wipe cache partition then reboot? Sometimes failing to wipe during update can cause things to not work correctly.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Have you tried uninstalling all the USB drivers for your device, restarting PC, re-installing drivers then restart PC and then try connecting your device.
When you updated, did you boot to stock recovery and factory reset and wipe cache partition then reboot? Sometimes failing to wipe during update can cause things to not work correctly.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Yes I tried everything uninstalling and reinstalling all the drivers and dozens of restarts nothing helps.
Nope when it got updated I didnt factory reset or wipe cache partition cuz i didnt want to loose my data.
It was an official update.
Now I just did the factory reset and cache partition wipe nothing helps
My pc still wont recognise my note 4.
5arhan said:
Yes I tried everything uninstalling and reinstalling all the drivers and dozens of restarts nothing helps.
Nope when it got updated I didnt factory reset or wipe cache partition cuz i didnt want to loose my data.
It was an official update.
Now I just did the factory reset and cache partition wipe nothing helps
My pc still wont recognise my note 4.
Click to expand...
Click to collapse
Does the device show anything at all in device manager on PC?
Droidriven said:
Does the device show anything at all in device manager on PC?
Click to expand...
Click to collapse
When i connect it makes a sound in pc
And my phone starts charging
And it says usb device not recognised.
And in device manager it shows with a yellow warning triangle that unknown usb device ( device descriptor request failed)
5arhan said:
When i connect it makes a sound in pc
And my phone starts charging
And it says usb device not recognised.
And in device manager it shows with a yellow warning triangle that unknown usb device ( device descriptor request failed)
Click to expand...
Click to collapse
And when you right click on the driver with the yellow triangle and select update driver, it does nothing?
Have you tried manually updating the driver and choosing the option to select from files on your PC instead of the auto-update feature? You can use this method to navigate to the folder that the Samsung drivers are installed in and select them from there, this should load the drivers.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
And when you right click on the driver with the yellow triangle and select update driver, it does nothing?
Have you tried manually updating the driver and choosing the option to select from files on your PC instead of the auto-update feature? You can use this method to navigate to the folder that the Samsung drivers are installed in and select them from there, this should load the drivers.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
When i try to update it says it is up to date and the manually installing of drivers.
Done with that too
The problem is just with the note 4
I have an s7 edge too and a note 3
They connect without any hassle to my pc
5arhan said:
When i try to update it says it is up to date and the manually installing of drivers.
Done with that too
The problem is just with the note 4
I have an s7 edge too and a note 3
They connect without any hassle to my pc
Click to expand...
Click to collapse
Have you connected to Odin While in download mode and it isn't recognized? Or have you only connected to PC while the phone is running in system and the PC doesn't recognize it?
Try these troubleshooting steps:
https://www.drivereasy.com/knowledg...ice-descriptor-request-failed-for-windows-10/
Follow the steps but don't install the crappy driver easy program.
Here's a video
https://m.youtube.com/watch?v=hKwRUdfRN2s
There are actually a lot of tricks that can be used to solve the "device descriptor failed/not recognized" error.
A Google search for:
"USB device descriptor failed"
Will give you plenty of tips.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Have you connected to Odin While in download mode and it isn't recognized? Or have you only connected to PC while the phone is running in system and the PC doesn't recognize it?
Try these troubleshooting steps:
https://www.drivereasy.com/knowledg...ice-descriptor-request-failed-for-windows-10/
Follow the steps but don't install the crappy driver easy program.
Here's a video
https://m.youtube.com/watch?v=hKwRUdfRN2s
There are actually a lot of tricks that can be used to solve the "device descriptor failed/not recognized" error.
A Google search for:
"USB device descriptor failed"
Will give you plenty of tips.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
It doesnt recognise at all neither on download mode in odin or in pc.
Haha guess what I did everything on that site even installed the crappy program for the extra drivers.
Tried everything man it just wont show up.
The solution everywhere is normally is about when no usb or phone connects
I want a solution to my problem which is all other usbs or phones get connected
Except my note 4
Hope you can help me out man
5arhan said:
It doesnt recognise at all neither on download mode in odin or in pc.
Haha guess what I did everything on that site even installed the crappy program for the extra drivers.
Tried everything man it just wont show up.
The solution everywhere is normally is about when no usb or phone connects
I want a solution to my problem which is all other usbs or phones get connected
Except my note 4
Hope you can help me out man
Click to expand...
Click to collapse
You changed the USB settings as suggested and nothing changes?
You disabled anti-virus before installing the drivers?
You disabled fast startup? (If your PC has this feature)
How USB works on your note 4 versus how it works on your other devices may have slight differences, that would explain why your others connect and the note 4 doesn't.
Have you enabled USB debugging developer options?
99% of the time this is a PC hardware/driver issue, not an issue with the android device in question.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
You changed the USB settings as suggested and nothing changes?
You disabled anti-virus before installing the drivers?
You disabled fast startup? (If your PC has this feature)
How USB works on your note 4 versus how it works on your other devices may have slight differences, that would explain why your others connect and the note 4 doesn't.
Have you enabled USB debugging developer options?
99% of the time this is a PC hardware/driver issue, not an issue with the android device in question.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Hey just did everything again (cuz i did it all earlier)
No luck
Except BIOS update
Was just reading about it
Kinda afraid to do it because it seems if anything goes wrong then I wont be able to boot my pc

Categories

Resources