[ROM][addison] Android Open Source Project 9 - Moto Z Play ROMs, Kernels, Recoveries, & Other Dev

[ROM][addison] Android Open Source Project 9 - Moto Z Play ROMs, Kernels, Recoveries, & Other Dev

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Moto Mods are not supported, fork my sources and add the support yourself if this is so important to you
AOSP is Android as Google release without other modifications, similar to Pixel/Nexus stock rom but without gapps.
Features such as Chop Chop, Double Twist, Fingerprint sleep and Ambient display gestures are kept.
Google does not release an AOSP Browser anymore since Marshmallow, thus there isn't a default browser. If I find the time I might port and revamp it in the future.
Working
Audio playback
RIL (Calls, SMS, Data)
Wifi
Bluetooth
Hotspot
Video Playback
LED Notifications
Camera
GPS
NFC
Biometric sensor
Night Mode
Not Working/Bugs
-
Camera2 APIs disclaimer
If you decide to enable Camera2 APIs, be aware that in certain conditions photos and videos quality might be extremely low.
This happens because Motorola on our device officially supports only the old camera apis.
For this reason old camera apis are currently enabled by default.
Preconditions
Unlocked bootloader
TWRP (3.2.1 or newer)
Oreo modem and bootloader
Installation
Place ROM & Gapps in your virtual SD
Reboot in Bootloader Mode
Go to "Recovery" (Vol +/Vol -) and confirm (power)
Wipe system if you're coming from a different Android version
Wipe Data (only if you come from a different ROM/Android version, not required while updating)
Wipe Dalvik cache
Install the ROM zip
DO NOT REBOOT
Install the Gapps zip (optional)
Reboot
Downloads
arm builds
arm64 builds (No more supported)
Sources
Device Tree
Kernel
Sensor HAL
XDA:DevDB Information
Android Open source Project 9, ROM for the Moto Z Play
Contributors
Alberto97
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
Based On: AOSP
Version Information
Status: No Longer Updated
Created 2018-08-15
Last Updated 2020-01-06

Changelog
09/08/2019
August security patches
Enabled IMS carrier settings in Brazil as per latest stock oreo (you still need to insert yourself the IMS apn)
Android for Work Profiles should work properly now
02/07/2019
July security patches
09/06/2019
June (and May) security patches
Vibration intensity is now adjustable on three levels from accessibility settings
Occasional crashes at boot/bootloops caused by the sensor hal are now fixed
Exposed through sysfs some SD infos (SD status register + speed class + uhs speed grade) and internal storage health
05/04/2019
April security patches
Fixed adopted storage
09/03/2019
March security patches
Device now goes in deep sleep mode when using Always on Display
09/02/2019
February security patches
Device correctly boots when setting pin/password/pattern *at boot* now
19/01/2019
January security patches
Device specific gestures entry points in Settings have been reworked to be consistent with the rest of UI
LZ4 kernel-side improvements from Pixel 2 kernel
Back to Moto's F2FS kernel sources
Video stablization is now working
---- From now on all builds will be 32bit, wipe data is required if you're updating on the top of a 2018 build ----
Old ARM64 builds changelog
28/12/2018
Lags and slowdowns have been fixed
Bootanimation does not crash anymore
22/12/2018
exFAT support for sdcards
Rebased kernel on the top of Moto pie sources
Now using stable f2fs kernel sources instead of Moto's fork
09/12/2018
IMS related stability issues should have been fixed now
07/12/2018
December security patches
Low speaker volume is now fixed
Proprietary stacks have been upgraded to pie
BFQ is the default IO scheduler
Enforcing selinux
Flip to Mute: the phone now vibrates when you mute/unmute it, just like Google's Flip to shhh
10/11/2018
November security patches
IMS is possibly working now
4K video recording is now available on AOSP an third party cameras
1080p and 720p video recording on Moto Camera is now fixed
Camera2 APIs are now working
Prima wlan update to LA.UM.7.6.r1-03400-89xx.0 CAF release
03/10/2018
October security patches
Reboot to recovery is now working
Wifi - BT crash fix from the experimental build included
Moto kernel patches from 28.85-13 release included
Blobs updated to OPNS27.76-12-22-9 moto release
Added some padding between mobile signal groups (before - after)
15/09/2018
September security patches
Flashlight now works in DND mode too
Rebased kernel (again) on the top of qcom pie sources
26/08/2018
Auto brightness fixed
Encryption support implemented
Removed wifi display support (reason here)
Added Google Sans font
MAC address is properly set now
Added missing F2FS moto changes in kernel rebase
15/08/2018
Initial Release

Do I need to update modem and bootloader?
Download DevCheck or CPU-Z or any other app that let you see your bootloader version.
If the reported version is not 0xC180 or 0xC182, you need to update them.
Anyway before installing the rom TWRP will do this check for you and will stop you if your device is not compatible.
How do I update modem and bootloader?
This does not wipe your data if you closely follow these steps
Download the latest firmware for addison (available here, lolinet.com mirror, moto.netlib.re mirror).
Alternatively I made a package (up here) that only contains the required images if you're short on data/have bad speed.
Once you have made sure adb/fastboot properly detects the device, open a terminal in the folder where you have extracted the firmware and run the following commands:
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash oem oem.img

Holy COW! Thanks Alberto! I will try it now! Best thing to do, flashing before sleeping! Saved my evening. I am very glad that you take your time and support our Phone and make us happy!

@Alberto97 which gapps do you recommend?

Milly7 said:
@Alberto97 which gapps do you recommend?
Click to expand...
Click to collapse
Good question? Are they build-in like in GSI P builds?
Wysłane z mojego XT1635-02 przy użyciu Tapatalka

When i want to start in the system it asks for a pattern, but i got a code to unlock, What should i do?

Thank you @Alberto97 :good:

Pie gapps unofficial :
https://builds.nezorfla.me/?dir=opengapps/pie/arm64
Wysłane z mojego XT1635-02 przy użyciu Tapatalka

Svensemann said:
When i want to start in the system it asks for a pattern, but i got a code to unlock, What should i do?
Click to expand...
Click to collapse
You have to format data in twrp. Doing that will disable encryption but it will wipe all your internal storage, so make a backup before doing it.

tomy1802 said:
You have to format data in twrp. Doing that will disable encryption but it will wipe all your internal storage, so make a backup before doing it.
Click to expand...
Click to collapse
Yes read it now! Was my fault, sorry!

Ok I'm going to flash it now [emoji846] see you soon I hope [emoji39]
So I restoring now my apps from titanium backup, those gapps from my link works but they are must flashed after rom booted at last one time ,so reboot is need after rom flash.Otherwise setup fc constantly.
Magisk 16.7 works [emoji846]
Bluetooth music playback via headphones works perfectly [emoji3]
Even Moto Camera works [emoji41]
Wysłane z mojego XT1635-02 przy użyciu Tapatalka

Not bad, you are fast

Good job!!

downloading now, soon i will post some reviews!
ps: AMAZING WORK, ALBERTO! U R A F***ING GENIUS!

sebx_g1 said:
Ok I'm going to flash it now [emoji846] see you soon I hope [emoji39]
So I restoring now my apps from titanium backup, those gapps from my link works but they are must flashed after rom booted at last one time ,so reboot is need after rom flash.Otherwise setup fc constantly.
Magisk 16.7 works [emoji846]
Bluetooth music playback via headphones works perfectly [emoji3]
Even Moto Camera works [emoji41]
Wysłane z mojego XT1635-02 przy użyciu Tapatalka
Click to expand...
Click to collapse
Can't seem to get the ROM to boot with gapps. Even when booting first before installing then. What else can I try?

Milly7 said:
Can't seem to get the ROM to boot with gapps. Even when booting first before installing then. What else can I try?
Click to expand...
Click to collapse
Does your phone ask for a password or it just keeps trying to boot?

It boots without gapps. No password being asked for as I decrypted.

Milly7 said:
It boots without gapps. No password being asked for as I decrypted.
Click to expand...
Click to collapse
Try with these gapps https://forum.xda-developers.com/re...development/arm64-bitgapps-pie-9-0-0-t3828515

Here are some screenshots of the rom

Related

[9] LineageOS 16.0 for z3c

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
LineageOS, an open-source Android distribution, is available for several devices,
with more being continuously added thanks to the biggest, yet ever growing, Android open-source community.
Join us and breathe new life in your device, be it old or new.
Click to expand...
Click to collapse
If you don't know LineageOS and would like to read about it before installing it you can take a look at the official Website.
Images
Here are some Screenshots of this ROM.
Features
Individuality
Customization is paramount to productivity.
That’s why LineageOS promises to push for user personalization and preference.
Everyone is unique and your device should be too.
Click to expand...
Click to collapse
Security
Your data, your rules. With powerful tools such as Privacy Guard, you are in control of what your apps can do whenever you want.
Trust will help you understand the security of your device and warn you about possible threats.
We take security very seriously: that’s why we deliver security updates every month to all our supported devices.
And to make your device more secure, lock everything behind an enhanced lock screen.
Click to expand...
Click to collapse
Longevity
LineageOS extends the functionality and lifespan of mobile devices from more than 20 different manufacturers thanks to our open-source community of contributors from all around the world.
Click to expand...
Click to collapse
Installation instructions
Prerequisites:
Unlocked Sony Xperia Z3 Compact
Fastboot drivers to install TWRP
Micro-USB Cable to connect your phone to your computer
Install:
Reboot to TWRP. *
Wipe cache, dalvik cache, data and system.
Format data to get rid of encryption.
Install ROM.
Install 9.0 Gapps for ARM. **
* recommended TWRP: Post #2
** optional
Update:
Get the latest build
Boot into TWRP
Flash the downloaded build
Reboot, if you don't wipe system backuptool will handle to reapply your modifications, for example: GApps.
Changelog
Code:
Changelog 2019-10-07
* Fixed offmode charging at Wall chargers (previously bright screen)
* Fixed offmode charging at computers (previously reboot loop)
Old Changelogs
Code:
Changelog 2019-10-06
* Fixed camera for everyone
* Set media volume steps to 25 and voice call volume steps to 7
* Actually use our cache partition, previously we were using a link to /data/cache instead of mounting the cache partition as /cache
* Cleanup of rootdir scripts
Code:
Changelog 2019-08-28
* Rolled fingerprint back to Sony's 5.1.1 fingerprint
-> safetynet CTS check works again
* Set original shipping API level to KitKat
* Minor cleaning
Code:
Changelog 2019-08-14
* Singificantly improved GPS
* August Android Security Bulletin
* Cleaned, script generated vendor
Code:
Changelog 2019-08-05
* Attempt to fix ANT+
* Added settings to control the camera button
Code:
Changelog 2019-07-08
* July Android Security Bulletin
* Rebased Linux 3.4.113 Kernel
-> Solved video recording lags with Snap
Code:
Changelog 2019-06-15
* Fixed Audio problems
* LED Notifications work again
* Manual Network selection fixed
Code:
Changelog 2019-06-07
* June Android security Bulletin
* LED seems to work with notifications now
* 4.0 Audio HAL -> NO, this does NOT fix our problems :/
Code:
Changelog 2019-05-10
* Enforcing sepolicy
* Fixed sensors
* Fixed FM Radio
* Fixed EXFat, sdfat and vfat
* Camera works fine
* May Android Security Bulletin
* Sound seems fixed - Maximum Volume still decreases still after a few seconds when using internal speakers
Code:
Changelog 2019-05-06
* Fixed AudioFX
* Fixed Camera
Code:
Changelog 2019-04-24
* Fixed Notification LED
Code:
Changelog 2019-02-19
* Fixed GPS
* Fixed Video Playback
Code:
Changelog 2019-01-09
* Fixed Bluetooth
Downloads
Download the ROM
Sources
DEVICE:
https://github.com/z3c-pie/device_sony_z3c
https://github.com/z3c-pie/device_sony_msm8974-common
https://github.com/z3c-pie/device_sony_shinano-common
KERNEL:
https://github.com/z3c-pie/kernel_sony_msm8974
Addons
OpenGapps
Magisk
SU-Addon
Thanks
Whole LineageOS Team for this amazing ROM
@rcstar6696
@Myself5
@drakonizer
@tomascus
@koron393
@nailyk
@SpiritCroc
I hope I haven't forgot anyone
Bugs
WHAT'S BROKEN
4K Video recording doesn't work in stock camera, but works for example in OpenCamera.
You tell me.
FAQ
Q: Why i can't reboot into the recovery from advanced reboot?
A: Because you have installed Magisk 19.1 which breaks it. Keep up to date here: https://github.com/topjohnwu/Magisk/issues/1418 - fixed by @Myself5 since 2019.05.20
XDA:DevDB Information
[9] LineageOS 16.0 for z3c, ROM for the Sony Xperia Z3 Compact
Contributors
NeoArian
Source Code: https://github.com/LineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: lineage-16-20190510
Stable Release Date: 2019-05-10
Created 2019-01-05
Last Updated 2019-10-10

TWRP 3.3.1 for our z3c out of an Android 9.0 environment!
Changes:
Code:
3.3.1-0.4-z3c
* Fixed fastboot boot
* Added bootlogo
* Dropped TWRP App
Code:
3.3.1-0.3-z3c
* Fixed encryption when security patch level doesn't match the recovery's
- [url]https://github.com/z3c-pie/twrp_device_sony_z3c/commit/411862532c247aea2c7b48d52aa596b40305e9ea[/url]
Code:
3.3.1-0.2-z3c
* Added a script to handle the CPU
-> increased the battery life significant ([url]https://github.com/z3c-pie/twrp_device_sony_z3c/commit/63f864068ad2f17ae2f1202b4edc311d74e2803d[/url])
Code:
3.3.1-0.1-z3c
* Fixed time
* Further Clean up's
Code:
3.3.1-0-z3c
* Switched from Android 6.0 to Android 9.0 environment
* Completely reworked tree
* Working decryption
The latest build is attached to this post.
Old builds are available here: https://sourceforge.net/projects/ephedraceae/files/z3c/twrp/
Source is available at: https://github.com/z3c-pie/twrp_device_sony_z3c/tree/android-9.0
How to install this build:
Rename the downloaded twrp image to twrp.img
Reboot to fastboot by holding volume up while connecting your device to your computer
Open a terminal and move to the directory with TWRP in it
Type
Code:
fastboot flash recovery twrp.img
Boot into TWRP while the device is powered off press the power and volume down button
Feel free to ask questions or give feedback about TWRP here .
Have a nice day!
Additional information about the recovery on this device:
First of all we should make the basics clear: On our Z3 Compact we have got a bootloader update which can boot a recovery from powered off state by pressing volume down and the power button. Because we haven't ever had this updated bootloader and not all sony devices received the update, there have been some intelligent people who brought a special init binary which can handle recovery boots during a normal boot. This means when using advanced reboot from the ROM or pressing a volume key while the sony logo appears at boot. https://github.com/LineageOS/android_device_sony_common/commits/lineage-16.0
To make this work there is this method to extract the ramdisk: https://github.com/LineageOS/androi...eage-16.0/extract_ramdisk/extract_ramdisk.cpp which uses zlib to decompress it. So far so good, zlib can decompress the default compression for recovery ramdisk which is gzip. However LZMA is more effective to reduce the size so we took it's advantage: https://github.com/omnirom/android_...mmit/885b01223a460d3f2500155ea415bdc8573679bc in order to fit recoverys compiled from recent environments (android-9.0 in my case) into our small FOTAKernel partition.
According to this change the init_sony can't handle the recovery boot anymore because it can't decompress the recovery's ramdisk so nailyk and Diewi (as far as i know) added support to decompress LZMA compressed ramdisk's with this chain: https://github.com/sonyxperiadev/device-sony-common-init/pull/20/commits
However these commits have never been merged into the LineageOS/android_device_sony_common nor the sonyxperiadev/device-sony-common-init. Since your ROM, CarbonROM, is using a fork of LineageOS/android_device_sony_common is missing these commits the recovery boot fails with a kernel panic, like this: https://del.dog/egawososux.htm
So you can either use a recovery which doesn't compress the ramdisk with LZMA (for example the one from here: https://forum.xda-developers.com/z3-compact/development/recovery-twrp-3-2-3-0-aries-t3837192 or ask your ROM developer to pick the according commits into the sony_common tree/use my fork of LineageOS's one https://github.com/z3c-pie/android_...mits/fa85dfcc07f42d73f9a1abf1f4c82d8bf0486a93 which would enable you to use recent TWRP builds with a LZMA compressed ramdisk.
I hope i presented it clearly and in the right way,
Have a nice day!
EDIT: Minimized patch for LZMA is available here: https://review.lineageos.org/c/LineageOS/android_device_sony_common/+/252923
Click to expand...
Click to collapse

Reserved

Hi, I can't open your thread in XDA Labs app, I suppose that's the case of many people and that's why there is not much views and comments on this thread.
I didn't tried yet your ROM but it sound great and will try it ASAP.
Also which recovery do you recommend to avoid errors like error 7 (if I remember) ?
Also will you continue to work on RR ?
EDIT : after posting this comment via browser, I can now open this thread in XDA Labs
EDIT 2 : everything is working

SUPER KOKA said:
Hi, I can't open your thread in XDA Labs app, I suppose that's the case of many people and that's why there is not much views and comments on this thread.
I didn't tried yet your ROM but it sound great and will try it ASAP.
Also which recovery do you recommend to avoid errors like error 7 (if I remember) ?
Also will you continue to work on RR ?
EDIT : after posting this comment via browser, I can now open this thread in XDA Labs
Click to expand...
Click to collapse
I use twrp-3.2.3 from here: https://forum.xda-developers.com/z3-compact/development/recovery-twrp-3-2-3-0-aries-t3837192.
I don't know yet about RR. I wanna see first whether we can get Bluetooth and gps working as soon as possible.

https://sourceforge.net/projects/ep...age-16.0-20190109-UNOFFICIAL-z3c.zip/download
Another build was uploaded with the latest lineageos updates including the January android security bulletin. On the device side Bluetooth was fixed

Installed without any problems
You did a great job!
Installed without any problems. It seems all functions work fine!

update
I've been in lineage, whether for the latest version update I have to hard reset or like the ota update

SUPER KOKA said:
EDIT 2 : everything is working
Click to expand...
Click to collapse
Great to hear!
CDLion said:
You did a great job!
Installed without any problems. It seems all functions work fine!
Click to expand...
Click to collapse
Thanks!
muhibbuddin irsyad said:
I've been in lineage, whether for the latest version update I have to hard reset or like the ota update
Click to expand...
Click to collapse
To be honestly I can't follow you. Do you mean that you don't know how to update the build? For this case you have to download manually and flash it in TWRP. There are no wipes needed.

Hi, thanks for this and how is the battery performance?

Any plans for making an LineageOS for microG rom?

Thanks for the ROM, I am using it right now, everything is working good except the camera. Can take photos, but video is not working. When I'm switching to video, the app is freezing and stuck. I tried to use the stock camera with magisk, it can't take photos or video neither. Tried manual camera too, it can take photos but no video.

etram said:
WOW ... !!!
Great Job.
What about the notification LED?
Click to expand...
Click to collapse
Just tested shortly, it seems to be broken, I will add to broken things list. Thanks to notify (?)

I flash the recovery and I delete assers but I can not install this rom every time updater process ended with error 255 .Can you help me?
my log

frht5382 said:
I flash the recovery and I delete assers but I can not install this rom every time updater process ended with error 255 .Can you help me?
my log
Click to expand...
Click to collapse
I try and I install 20180105 build but I cant install new build why ?
twrp 255 error

frht5382 said:
I flash the recovery and I delete assers but I can not install this rom every time updater process ended with error 255 .Can you help me?
my log
Click to expand...
Click to collapse
frht5382 said:
I try and I install 20180105 build but I cant install new build why ?
twrp 255 error
Click to expand...
Click to collapse
Are you sure that you use the recovery from here?
https://forum.xda-developers.com/z3-compact/development/recovery-twrp-3-2-3-0-aries-t3837192

NeoArian said:
Are you both sure that you use the recovery from here?
https://forum.xda-developers.com/z3-compact/development/recovery-twrp-3-2-3-0-aries-t3837192
Click to expand...
Click to collapse
Solved.I dowloaded false file which 632 mb.Now I re download true file and it work thank you

frht5382 said:
Yes I am sure.I install 2019 01 05 build it work but I try 20190109 fail everytime error code 255
edit
I've just realized I clik download button and if I download latest version green color button I download 631 mb but down of button lineage-16.0-20190109-UNOFFICIAL-z3c.zip 448 mb which one should I download ?
why different size ?
Click to expand...
Click to collapse
The 631mb Rom is for my Xiaomi Mi 6, you have to use the one for z3c

NeoArian said:
Tue 631mb Rom is for my Xiaomi Mi 6, you have to use the one for z3c
Click to expand...
Click to collapse
I installed thank you .How to enable root access? Or magisk work ?

frht5382 said:
I installed thank you .How to enable root access? Or magisk work ?
Click to expand...
Click to collapse
Magisk works.

[ROM][UNOFFICIAL][8.1] LineageOS 15.1 for Amazon Fire HD8 7/6th gen (douglas/giza)

⏱ Change log / Release Notes
2022-06-14 [douglas] [giza]
Updated sdcardFS to 2.0.
Updated the exFAT driver.
Fixed detection of external SDs.
2022-06-13 [douglas] [giza]
Rebased the entire tree, did a general cleanup
Fixed MicroG support (Signature Spoofing)
Fixed and re-enabled sdcardFS
Fixed direct Magisk installation/update
Enabled USB MIDI support
Enabled OTG ethernet support
Disabled binder logging
Enabled OpenGLES AEP
2022-01-02 [douglas] [giza]
Fixed USB tethering.
Added mediatek perf support.
Updated vendor blobs to the latest FireOS version.
Defined the vendor security patch.
2021-11-07 [douglas] [giza]
Fixed video recording on douglas.
2021-10-31 [douglas] [giza]
Fixed some DRM leftovers.
Added initial microG support.
Added exFAT support.
Fixed audio stream.
Added ged support.
Updated security patch to October 2021.
2021-10-03 [douglas] [giza]
Completely disabled sdcardfs.
Purged a lot of mtk/amazon logging.
Fixed missing symbols/libraries.
Reworked the audio configurations.
Fixed all the sensors.
2021-09-16 [douglas] [giza]
Fixed camera on douglas.
2021-09-12 [douglas] [giza]
Cleaned up wi-fi blobs/configs/service definitions.
Kanged the wi-fi HAL from a 8.1 mediatek device.
2021-09-07 [douglas] [giza]
Fixed swapped volume keys.
Show internal storage by default in the file manager.
Added option to reboot to hacked bootloader using ADB.
Disabled the update recovery function.
Added support for more SDs/USBs with other formats.
2021-09-05 [douglas] [giza]
Fixed over the air (OTA) updates.
Fixed Magisk/GAPPs installation.
The build is now signed with dev-keys.
Fixed installation of the ROM on giza.
Addressed a few SELinux denials.
2021-09-03 [douglas] [giza]
Audio works fine, incuding the mic.
DRM works fine, reports L1.
Video playback works partially fine.
Disabled camera as it doesn't work.

Reserved

Reserved

Rortiz2 said:
Magisk
For some weird reason, Magisk zip won't work (because of shims, wtf) so you'll need to manually patch your boot image with the Magisk Manager app and you'll need to flash it to boot_x with hacked fastboot mode or to boot with TWRP.
Click to expand...
Click to collapse
Fastboot is informed of the exploit so fastboot flash boot <path> will work.

SamDungUser said:
Fastboot is informed of the exploit so fastboot flash boot <path> will work.
Click to expand...
Click to collapse
No, fastboot isn't informed of the exploit, fastboot flash boot will overwrite the microloader and will brick the device.

Rortiz2 said:
No, fastboot isn't informed of the exploit, fastboot flash boot will overwrite the microloader and will brick the device.
Click to expand...
Click to collapse
Didn't know that. I think that's why I had to erase the boot partition just so I can install a rom again. it was able to boot to twrp so I just rebooted to hacked BL and erased then boot back and flash a rom in twrp

SamDungUser said:
Didn't know that. I think that's why I had to erase the boot partition just so I can install a rom again. it was able to boot to twrp so I just rebooted to hacked BL and erased then boot back and flash a rom in twrp
Click to expand...
Click to collapse
Yes that's possible, because TWRP restores the microloader (boot-exploit). Great to hear that you could recover it.

if you need to check the md5 upload the file and use https://emn178.github.io/online-tools/md5_checksum.html

The rom is abnormally large? When selecting the aroma package barely anything fits, in 7.1.2 it fit 5x more apps using th aroma package also 400 MB for the rom? what's causing this? how can I make the system partition bigger?

SamDungUser said:
The rom is abnormally large? When selecting the aroma package barely anything fits, in 7.1.2 it fit 5x more apps using th aroma package also 400 MB for the rom? what's causing this? how can I make the system partition bigger?
Click to expand...
Click to collapse
If I'm allowed to ask, what's aroma? And yeah, the ROM size it's quite normal since Android O includes vndk and hidls.

It feels really snappy compared to 14.1. I guess that's because of a different launcher?

dontpanic-xda said:
It feels really snappy compared to 14.1. I guess that's because of a different launcher?
Click to expand...
Click to collapse
I don't think the launcher has something to do with the snappiness. I guess Android Oreo it's more optimized than Android 7. You also need to keep in mind that I've updated the GPU drivers (kernel-side, mali).

Wow, great job @Rortiz2 ! Respect and thank you!

Rortiz2 said:
If I'm allowed to ask, what's aroma? And yeah, the ROM size it's quite normal since Android O includes vndk and hidls.
Click to expand...
Click to collapse
Aroma is an open gapps installer it includes all apps and offers a gui installer. Also, I found out what causes the screen issue. Apparently just installing a SELinux switcher app will cause the issue where if you put it to sleep by pressing the power button and you press the power button again to take it out of sleep nothing happens. I don't know how just installing a selinux switcher causes the screen issue and the Bluetooth crashes

SamDungUser said:
Aroma is an open gapps installer it includes all apps and offers a gui installer. Also, I found out what causes the screen issue. Apparently just installing a SELinux switcher app will cause the issue where if you put it to sleep by pressing the power button and you press the power button again to take it out of sleep nothing happens. I don't know how just installing a selinux switcher causes the screen issue and the Bluetooth crashes
Click to expand...
Click to collapse
Why would you set SELinux to enforcing..? Sepolicies aren't yet prepared to do so... Anyway, I don't have any clue about aroma, use the standard gapps package I guess.

Rortiz2 said:
Why would you set SELinux to enforcing..? Sepolicies aren't yet prepared to do so... Anyway, I don't have any clue about aroma, use the standard gapps package I guess.
Click to expand...
Click to collapse
I want to have it on enforcing to get safetynet to pass

SamDungUser said:
I want to have it on enforcing to get safetynet to pass
Click to expand...
Click to collapse
Alright, I guess I'll try to fix sepolicies then. Don't expect it to be quick though, this takes a lot of time.

I'm really impressed with this ROM. Running Services reports nearly 800 MB free after boot and it's definitely snappier. Also, viewing Settings with a pure black background is probably my favorite feature.
One thing I did run into was that during the install of GApps, it seemed to stall after the Installation Complete message. I just rebooted manually and it was all fine. Great job, Rortiz2

rom installs fine but it looks like it freezes after "installation compete" for opengapp.
Used the link above for openapp. Did not choose a different variation.

[ROM][11] crDroid 7x for Huawei P8 Lite 2017 and P10 Lite

Non-Official crDroidAndroid 11 v7.x for Huawei (prague)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changelog :
Febrary 2022
Update to crDrom Febrary version by eremitein (change log) :
crDroid 7.15 base
February 2022 SPL
to the Phh settings > Misc added new options: Restart systemUI and Dump system logs
SuperUser app replaced by updated new one (special thanks for contributors ponces and Amy). if you have problems after dirty update you should first remove app from Apps settings then disable/enable Superuser in Phh settings
patch for vold timeout applied for real now
January 2022
Update to crDrom January version by eremitein (change log) :
January 2022 SPL
crDroid 7.14 base
implemented Huawei IMS patches from Iceows
fixes for for some devices (mainly with Oreo vendor, A-only) access for media files from some apps like WhatsApp or Telegram (based on Iceows's patch)
backported changes from v400h device_phh_treble: All devices support unprocessed audio source, Fix audio for Umidigi X and Gome U9, Add Netflix ID for Mi 11 lite 5G
patch for vold timeout (by Iceows)
opt-out cringe TCP info parsing error (AAAAA....) on legacy kernels (commit)
libprocessgroup: Do not remove uid cgroups directory (commit)
added patch for Huawei RIL signal indicator (by Iceows)
launcher replaced with Trebuchet from LineageOS 18.1
Fix sdcard format internal storage
December 2021
Integrate NFC, Miracast/cast , Live Display patches
Add media patch (Fix "Error loading media" in social apps like instagram, messenger..)
Add support of RNE-L21 (P10 Mate)
Update to crDrom December version by eremitein (change log) :
crDroid 7.13 base
December 2021 SPL
phh patches v313 + some stuff backported from v400 device_phh_treble: fixes for Xiaomi Mi 11 Lite 5G, Motorola One Fusion Plus, Huawei P10, Realme GT ME, Blackview BV9500Plus etc
trying to fix screen recorder bug on some devices (onemoretime..), thanks Iceows for the points
added Phh option for enabling old cutout covering behavior in fullscreen mode
Umidigi A7 Pro: put notch value from stock framework-res
hide OTA menu, that's the way
November 2021
Initial build based on release crDRom11 October 2021 (thanks to *eremitein)
Transform A-Only crDRom11 ROM to Huawei P8 lite 2017 or Huawei P10 lite ROM
Fix AGPS, NFC, Cast/MiraCast and Lineage LiveDisplay
Pre-requisite :
You must have TWRP installed, use this one (make sure to have the unofficial Android 11 one ! )
You must be decrypted before installing it otherwise it won't boot
Installation :
Download image file of the rom crdrom-v315+220202-iceows-pra.7z
go to TWRP
format data
reboot to TWRP again
do a full wipe (system, data, cache, dalvik/art cache) !
reboot to bootloader
extract crdrom-v315+220202-iceows-pra.7z
run: fastboot flash system <drag system.img here>
reboot to TWRP
resize system
(optional) flash patches :
1 - Google Apps lite : [RECOVERY]LiteGapps_arm64_11.0_v2.6_official.zip
2 - Enable AGPS : 7-AGPS-FIX-AltairVendor-v3.6-signed.zip
3 - If you are on EMUI 8.0.0.408 or sup : 8-Huawei-PRA-FixPreav-A-v1.1-signed.zip
reboot to System
Enjoy !!!
Not Working :
VoLTE
ROM OS Version: Android 11
ROM Kernel: Linux 4.4.x (stock 4.4.26 or Siberia_4.4.300.zip)
ROM Firmware Required: EMUI 8
Based On: crDroid
Credits:
@eremitein
And all the others who tested my patches and helped me improve this ROM
https://github.com/eremitein/treble-patches/wiki/crDRom11-Project#changes

Installation went just fine but:
Installing NikGapps-Core ok
Installing NikGapps-SetupWizard failed: "Looks like storage space is full"
Nexst step was Magisk then i was done

Have you resized the partition system?

AltairFR said:
Have you resized the partition system?
Click to expand...
Click to collapse
Of course yes

Fixed, kinda, with OpenGapps Pïco it worked.

Well it boots but I get stuck in a weird loop during the initial setup. I'm stuck in the "Checking for updates" -> "Just a sec..." screens just switching and looping forever. Or when I proceed to do the setup offline without connecting to WiFi, it just sits on the "Just a sec..." loading screen forever.
It seems like some background processes are timing out during the setup process or failing to run properly, I could see the messages pop up for a split second before disappearing, "Speech services by Google keeps stopping" being one of them for example, the others pop up so fast that I wasn't able to read them, but something regarding Google play services or something.
Can I just reinstall the Gapps or...? Or do you think this is an issue with something else? Or is it supposed to take extremely long?

Only google apps before 31/01/2021 are supported by all A11 ROM. Which version did you install?

The same version that I used for the DarkJoker Lineage 18.1 ROM, ogapps-nano-20210803 which worked fine(?) with that ROM, apart from some other unrelated issues with audio/microphone.

Got the gapps working by first booting into system without gapps and completing the initial setup, then going back to recovery and installing the gapps.

So far so good, boot time seems a lot faster than LOS 18.1 from DarkJoker360, but camera isn't synchronized with flash lght(same as in LOS 18.1).
Thank You.
RNE-L21 Here.

Yes I have fixed slow boot. For the synchronisation of the camera I will try to fix it. Perhaps with the stock rom apk camera

PRXVISION said:
The same version that I used for the DarkJoker Lineage 18.1 ROM, ogapps-nano-20210803 which worked fine(?) with that ROM, apart from some other unrelated issues with audio/microphone.
Click to expand...
Click to collapse
What are these other problems? I correct the problems that are pointed out to me in the ROM that I maintain and afterwards I distribute my fixes.
Here is an XDA link on my version of lineage 18 :
[ROM][Huawei][11] LeaOS - Lineage 18.1 for Huawei device (EMUI 8)
Non-Official Lineage 18.1 for EMUI 8 hi6250 Huawei (prague, mediapad, warsaw, rhone) - LeaOS LeaOS is a project which based on LineageOS 18.1 with Andy Yan's and phhusson's Treble GSI patches. I have added my personnals patches for Huawei...
forum.xda-developers.com

Thank you for trying to fix the camera bug.
Also I forgot to mention that I had to copy the 1080x2160 folder with the offline charger status since my phone screen differ.
I think the only differences between the p10 Lite and Mate p10 Lite(RNE-L21) is screeen size, amount of ram and cpu clock.
I don't use gapps so cannot comment on this tough.
Regards,
P.

Hello
If you are interested I fixed an issue that affects all Huawei A11 ROMs last night. This is a rights issue that prevents applications from reading and writing to the directory that contains the photos. The patch is on the LeaOS thread but it must also work on the crDroid. I will integrate your offline loading images in my next patch. You can send me the zip in MP
Thanks, have a good day

AltairFR said:
What are these other problems? I correct the problems that are pointed out to me in the ROM that I maintain and afterwards I distribute my fixes.
Here is an XDA link on my version of lineage 18 :
[ROM][Huawei][11] LeaOS - Lineage 18.1 for Huawei device (EMUI 8)
Non-Official Lineage 18.1 for EMUI 8 hi6250 Huawei (prague, mediapad, warsaw, rhone) - LeaOS LeaOS is a project which based on LineageOS 18.1 with Andy Yan's and phhusson's Treble GSI patches. I have added my personnals patches for Huawei...
forum.xda-developers.com
Click to expand...
Click to collapse
Awesome I'll look into that.
The problems I've experienced indeed occur on all of the A11-based ROMs as you mentioned, so perhaps this will fix that.
But just to bring out my problems with the ROM, there seems to be some kind of a conflict with how apps access the camera/microphone:
Sometimes (most frequently when using something like Snapchat) the camera stops working completely (it says that the camera could not be connected to) and you have to exit the app and reopen it to make the camera work again. This is the only issue that also happens on the stock camera app in addition to all of the third party apps.
Also on Snapchat, you're not able to record any videos, only take pictures. When you try to record a video the video preview just freezes and essentially all it will be able to do is just capture a picture of the first frame of the "video" you were trying to take. After that if you try to go back the camera crashes and will only display black image until you close the app and open it again.
When using the camera on Instagram, Twitter, Facebook, you can record videos, but the audio in the captured video is kind of distorted or bad quality.
However when using the stock camera app or the stock audio recorder app the audio was fine, on all of the A11 ROMs I've tried.
So far I've tested Darkjoker Lineage 18.1 ROM and AOSP 11 ROM and also latviandudes Descendant XI and the distorted audio issue has been present on each one of them.
Since nobody has reported these bugs on any of those ROMs, and since it happens for me on all of the ROMs I suspected that maybe it's just my device that is broken but I reverted back and reinstalled original EMUI OS from the Huawei recovery thing, and when testing it on EMUI everything works fine, audio is good, camera works.
So idk, it must have something to do with A11 ROMs?
I havent tested other non-A11 ROMs, so idk if there's any difference there but yeah.
One of the other problems is that applications aren't able to preview photos when you're trying to select photos to send. On FB Messenger for example, it says "Error loading media" for all of the images. On other apps like Discord/Twitter all images appear black/won't load.
This probably has to do with this what you posted:
AltairFR said:
This is a rights issue that prevents applications from reading and writing to the directory that contains the photos.
Click to expand...
Click to collapse
But yes, I really don't have a clue what the other issues are related to but let me know and I can send some more proper examples and explanations or something

I have fix the error "Error loading media". See my thread LeaOS and install the last fix

To download media fix : https://forum.xda-developers.com/t/rom-huawei-11-leaos-lineage-18-1-for-huawei-device.4371629/
I will see if I can reproduce and correct the other problems

11spqr said:
So far so good, boot time seems a lot faster than LOS 18.1 from DarkJoker360, but camera isn't synchronized with flash lght(same as in LOS 18.1).
Thank You.
RNE-L21 Here.
Click to expand...
Click to collapse
Hi,
I manage to reproduce the problem on my version of lineage 18.1 and on my PRA-LX1 . I will try to fix it.
Thanks,

I've updated my phone, "Rhone", to the latest version of crDroid by AltairFR.
My update curve was although different.
I HAVE had installed previous version of crDroid on my phone.
I've booted to TWRP, cleaned cache/dalvik cache, rebooted to bootloader, flashed latest system image via fastboot, rebooted to TWRP again, flashed AGPS patch, resized system partition.
After that phone rebooted to system normally.
I've had all my apps installed and working fine, my sdcard was mounted properly and all my files was still there(phone is using it as an extension to internal system memory).
The only thing I've noticed after first boot was a progress bar with sign "performing system update"!
The offline charging is working grate(no more reboots), thanks AltairFR.
With Syberia 4.4.280 kernel battery life improved significantly, IMHO + 1/3 of initial life on stock huawei kernel, yes it is "one day+" extra time!
What bothers me is the phone model in "about phone" information center.
If any one knows what files have to be edited to change it to RNE-L21 instead PRA-LX1 would be grateful. If it is impossible I'm fine with it.
Thank you very much,
Bests,
P.

11spqr said:
I've updated my phone, "Rhone", to the latest version of crDroid by AltairFR.
My update curve was although different.
I HAVE had installed previous version of crDroid on my phone.
I've booted to TWRP, cleaned cache/dalvik cache, rebooted to bootloader, flashed latest system image via fastboot, rebooted to TWRP again, flashed AGPS patch, resized system partition.
After that phone rebooted to system normally.
I've had all my apps installed and working fine, my sdcard was mounted properly and all my files was still there(phone is using it as an extension to internal system memory).
The only thing I've noticed after first boot was a progress bar with sign "performing system update"!
The offline charging is working grate(no more reboots), thanks AltairFR.
With Syberia 4.4.280 kernel battery life improved significantly, IMHO + 1/3 of initial life on stock huawei kernel, yes it is "one day+" extra time!
What bothers me is the phone model in "about phone" information center.
If any one knows what files have to be edited to change it to RNE-L21 instead PRA-LX1 would be grateful. If it is impossible I'm fine with it.
Thank you very much,
Bests,
P.
Click to expand...
Click to collapse
Yes I have hardcode this properties in my version of crDroid. I can make several version, one for PRA and one for RNE ? Instead make a patch to change after

[ROM][UNOFFICIAL][12] LineageOS 19 for Xperia X Compact [FINAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.LineageOS is based on the Android Open Source Project, with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.All the source code for LineageOS is available in the LineageOS GitHub organization.And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.You can also view the changelog for a full list of changes & features.Official LineageOS website : http://lineageos.orgAbout LineageOS Legal : http://lineageos.org/legal
Important Information
1. This ROM operates without ODM images, just follow the installation instructions.2. This ROM does not intended to support Google Camera, but you can try some mods.Downloads Links
LineageOS 19:Unofficial: https://sourceforge.net/projects/loire-development/files/lineageos-19.1/kugoGoogle Applications (optional):MindTheGapps: https://androidfilehost.com/?w=files&flid=322935 (Android 12.1 -> arm64)XDA post about GApps: https://xda-developers.com/download-google-apps-gappsRecommended Recovery (optional):TWRP 3.x: https://forum.xda-developers.com/-/-t3793837
Flashing and updating
Please install the latest version of TWRP to avoid further issues with recovery!
LineageOS clean install:
Download the latest build of LineageOS ROM
Full wipe and factory reset (recommended / backup to make sure not to loose data)
Flash the LineageOS ROM zip from the Recovery
Flash the GApps to have the Google Applications (optional)
Every additional zip you want to flash (optional)
Reboot
LineageOS update/upgrade:
Download the latest build of LineageOS ROM
Wipe cache and dalvik cache
Flash the latest LineageOS ROM zip from the Recovery
Every additional zip you want to flash (optional)
Reboot
You can also update using the built-in Updater (requires at least TWRP 3.6.x or LineageOS Recovery)
About the builds:
Kernel sources: https://github.com/Chippa-a/android_kernel_sony_msm8956
Issues and reports
Report issues only if you are using the ROM kernel
If an additional mod is installed, make sure it's unrelated, and mention it
Make sure the issue wasn't discussed earlier in the threads
Grab a logcat right after the problem has occurred
(Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0
(Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Also thanks to:
The LineageOS Team
The SODP Team
Everyone involved in working and testing
Contributors
Chippa_a
ROM OS Version: 12.x
ROM Kernel: Linux 4.9.x
Version Information
Status: Stable

FEATURES AND ISSUES
Boot: Ok
Bluetooth: Ok
WiFi: Ok
WiFi Hotspot: Ok
RIL - Phone - Data: Ok
GPS: Ok
Camera: Ok
Camcorder: Ok
Lights: Ok
MicroSD: Ok
Accelerometer: Ok
Compass: Ok
Gyroscope: Ok
QTI sensors: Ok
Touchscreen: Ok
FM Radio: N/A
Fingerprint: Ok
Vibrator: Ok
Microphone: Ok
Audio & music: Ok
Bluetooth audio: Ok
NFC: Unknown (HCE: Unknown)
Kernel: Ok
Graphics: Ok
3D Rendering: Ok
Clock: Ok
DRM: Unknown
Offline Charging: Ok
USB: Ok
USB Tethering: Ok
USB OTG: Ok
Encryption: Ok
SEPolicies: Enforcing

what the ...!?
i downloaded los18 just yesterday, installed it this morning and now i see los19 sneaked by
thank you so much chippa_a, i will try it out tomorrow
unbelievable what your doing to this oldschool device.

Gcam works perfectly on it. Thanks a lot for this device!!!

This works beautifully and is really smooth. Never thought I'd see another rom for the XC again.
Can confirm that GCam 8.x with HDR actually works! (No crashes, or stuttering) Unlike previous roms with the most recent kernel before this new one. I don't know what magic you pulled to make this happen but thank you!

Thanks for this rom! It is very fast.... Only Chrome browser is laggy...

decsimon said:
Thanks for this rom! It is very fast.... Only Chrome browser is laggy...
Click to expand...
Click to collapse
I haven't experienced this. For me normal browsing was pretty smooth.
Have you also flashed the kernel from the .zip?
I must say that for now everything seems to work fine for me (incl. Gapps).
Tested fingerprint reader, 4G, DRM with Tidal, smooth and responsive Maps / Android Auto, smooth Chrome. No sudden reboot for now.

konstruktor said:
I haven't experienced this. For me normal browsing was pretty smooth.
Have you also flashed the kernel from the .zip?
I must say that for now everything seems to work fine for me (incl. Gapps).
Tested fingerprint reader, 4G, DRM with Tidal, smooth and responsive Maps / Android Auto, smooth Chrome. No sudden reboot for now.
Click to expand...
Click to collapse
Ok, what steps for flash kernel i must to follow? Rom, gapps, kernel? Magisk is a problem or i can flash it? (i need it for apk bank)

decsimon said:
Ok, what steps for flash kernel i must to follow? Rom, gapps, kernel? Magisk is a problem or i can flash it? (i need it for apk bank)
Click to expand...
Click to collapse
You won't need to flash the kernel separately, it's included in the zip:
1. Boot to TWRP.
2. Install the Lineage zip file.
3. Reboot to recovery.
4. Optional: In TWRP, install/flash Magisk 24.1 and/or MindThe GApps.
That's it. No issues with Chrome lag either. I've tried a few browsers and they all work well.

I've tested a few GCams, I find these two work best so far:
Parrot043: MGC_7.6.008_Parrot043_V7.apk
Download MGC_7.6.008_Parrot043_V7.apk by Parrot043.
www.celsoazevedo.com
Parrot043: PMGC_7.2.014_Relesed_V1.apk
Download PMGC_7.2.014_Relesed_V1.apk by Parrot043.
www.celsoazevedo.com
In the Advanced Settings, make sure to change AI White Balance to "Pixel 3 XL" for best colour accuracy.
Note: For the front selfie cam to work, you'll need to disable HDR first.
Please post here if you find any other good ones!

how if i try nfc on ex japan S0-02 j ?

Little adventure said:
how if i try nfc on ex japan S0-02 j ?
Click to expand...
Click to collapse
Not sure what you're asking but NFC is located under:
Settings > Connected Devices > Connection Preferences > NFC
If it doesn't turn on, you might have to flash the last Sony stock firmware first then install this rom.
Someone with the JA model might be able to help.

It works great! Very fast boot time. Everything is smooth, so far haven't noticed any bugs. Fingerprint unlock is faster than on stock and LOS 16.
Camera quality with the first GCam is also the best out of all custom ROMs I've tested. Great job! A new life for my old Xperia.
betacrypt said:
I've tested a few GCams, I find these two work best so far:
Parrot043: MGC_7.6.008_Parrot043_V7.apk
Download MGC_7.6.008_Parrot043_V7.apk by Parrot043.
www.celsoazevedo.com
Parrot043: PMGC_7.2.014_Relesed_V1.apk
Download PMGC_7.2.014_Relesed_V1.apk by Parrot043.
www.celsoazevedo.com
In the Advanced Settings, make sure to change AI White Balance to "Pixel 3 XL" for best colour accuracy.
Note: For the front selfie cam to work, you'll need to disable HDR first.
Please post here if you find any other good ones!
Click to expand...
Click to collapse

First , thanks for this Rom I'm very happy to See Android 12 on my phone.
I have tried Encryption and it doesn't work for me. I have a bootloop.
Has anyone else tested it?
And on the Encrypt page , I had astrange bug : I wasn't able to access to the"Encrypt" button at the bottom of the page . I had to set the police size at the smallest size to see it.

Maciek602 said:
It works great! Very fast boot time. Everything is smooth, so far haven't noticed any bugs. Fingerprint unlock is faster than on stock and LOS 16.
Camera quality with the first GCam is also the best out of all custom ROMs I've tested. Great job! A new life for my old Xperia.
Click to expand...
Click to collapse
Agree, fingerprint detection and unlocking is incredibly fast, didn't think it could ever be improved this much.

betacrypt said:
Not sure what you're asking but NFC is located under:
Settings > Connected Devices > Connection Preferences > NFC
If it doesn't turn on, you might have to flash the last Sony stock firmware first then install this rom.
Someone with the JA model might be able to help.
Click to expand...
Click to collapse
thanks for the answer sir
I have ex japan status bootloader yes, now position in custom rom lineage 16.0 android pie, this rom very smooth in my old device , i try turn on nfc in this rom, nfc doesnt turn on , but nfc working fine in ex global
Maybe hardware nfc ex japan different with ex global , so that maybe build tree and config specific for ex japan , correct me if i wrong sir

my experience with gapps 12.1 12L
open gapps stock - not working (endless bootanimation)
open gapps pico - unusable (loop before setting up fingerprint)
flame gapps full - unusable (loop before setting up fingerprint)
flame gapps basic - unusable (loop before setting up fingerprint)
mindthegapps - working
nik gapps omni - working
nik gapps stock - working fine so far

I have this problem...my bank apk its OK with last magisk (and fingerprints setting and Hide zygisk), but gpay dont work when i insert my card code cvv, it say that is not possibile continue because possible root phone....i try to hide all with zygisk of magisk .....
OK i resolved with module safetynet....

Toggles for me is too big, ....is possible return to standard lineageos toggles 16/17/18?
So when swipe down one time, i can see 6 toggles and not only 4....

decsimon said:
Toggles for me is too big, ....is possible return to standard lineageos toggles 16/17/18?
So when swipe down one time, i can see 6 toggles and not only 4....
Click to expand...
Click to collapse
That's Android 12. I wouldn't hold my breath that someone could port an older System UI over. You would have to get used to it I'm afraid.

[ROM][Huawei][12] LeaOS - Lineage 19.1 for Huawei device (EMUI 9)

Non-Official Lineage 19.1 for EMUI 9 hi6250 Huawei (anne) - LeaOS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LeaOS is a project which based on LineageOS 19.1 with Andy Yan's and phhusson's Treble GSI patches. I have added my personnals patches for Huawei devices : Assisted GPS, NFC, CAST/Miracast, Default Sound etc..) and some eremitein patch
Changelog :
LeaOS September 2022 version
September 2022 SPL
Synchronize with last Lineage Source
Add /splash2 and /modem_log support
Add kirin and huawei properties
Support permissive or enforce kernel
Update Lite Google Apps to 2.6
LeaOS August 2022 version
Jul + Aug 2022 SPL
Synchronize with last Lineage Source and v415 phh
Port new functionnalities Treble Setting from 18.1 version (Dump log, restart ui, dynamic root, safetynet, auto run, nolog)
Add miracast support
Add scanner QR support
LeaOS Jun 2022 version
Jun 2022 SPL
Synchronize with last Lineage Source and v414 phh
Fix MediaScanner crash and no default sound (ringtone, alarms..)
Add support of EMUI 9.1.0.405 (preav partition)
Pre-requisite :
You must have TWRP installed if you want install patch. and a phone with unlock bootloader
Installation (crypt or uncrypt)
Download file : “LeaOS-19.1-20220911-iceows-ane.7z" and extract img file
Flash system image : fastboot flash system <drag system.img here>
Flash twrp image: fastboot flash recovery_ramdisk <drag twrp img here>
Boot into twrp: power + vol+ while NOT connected to pc
Resize system: Wipe > Advanced Wipe > System > Repair or Change File System > Resize File System > Swipe
Wipe cache, dalvik/art cache, internal storage, data
(optional) install AGPS patch : 4-Huawei-AGPS-AB-v1.1-signed.zip
(optional) install DRM patch for EMUI 9.1.0.405 : 8-Huawei-FixPreav-AB-v1.0-signed.zip
(optional) install now Google Apps Lite : LiteGapps_arm64_12.1_v2.6_official.zip
reboot to System and set up the phone with Lineage first start assistant. You can also add most user
Enjoy !!!
More informations to install here : https://forum.xda-developers.com/t/guide-emui9-p20-lite-basics.4341373/
Not working :
Offline charging
Bluethooth pairing with code (use app)
Source Code:
https://github.com/Iceows
ROM OS Version: Android 12L (12.1)
ROM Kernel: Linux Huawei 4.9.148 or Phenix 4.9.319
ROM Firmware Required: EMUI 9
Based On: Lineage 19.1
Credits:
@Frax3r (Testing)
@PHH
@eremitein
@RakinTheGreat (GCam)
@TureX (Kernel)
And all the others who tested my patches and helped me improve this ROM
Support Group

Screencopy

Hello, exciting to see android 12 on this phone! A few questions:
* is this good enough to be used as daily driver?
* i remember previous lineage versions having problems with signal strength icon. Do your fixes include fix for this?
* i read some people having problems with wifi and fingerprint on lineage, but fixed them by going to previous stock version with better drivers, is that correct and not related to rom?
* do payments work with this rom? Google Pay and banking apps
* according to your instructions, we have to flash image through fastboot and not twrp as explained in other threads? will twrp flash produce the same result? maybe that's trivial, but i still do not understand the concept fully
* in other threads i read that you need to do factory reset from eRecovery after flashing lineage, do you not have to do that here?
* i could not find information about what this a/ab version is. can you explain?

Signal strengh and wifi are fixes by me since Lineage 18.1. I gave my patches to all the main developers of the GSI
This version of lineage 19.1 have for the moment two problems :
- offline charging
- bluetooth pairing not working
For daily use , use LeaOS Lineage 18.1 please

Betrakiss said:
Hello, exciting to see android 12 on this phone! A few questions:
* is this good enough to be used as daily driver?
* i remember previous lineage versions having problems with signal strength icon. Do your fixes include fix for this?
* i read some people having problems with wifi and fingerprint on lineage, but fixed them by going to previous stock version with better drivers, is that correct and not related to rom?
* do payments work with this rom? Google Pay and banking apps
* according to your instructions, we have to flash image through fastboot and not twrp as explained in other threads? will twrp flash produce the same result? maybe that's trivial, but i still do not understand the concept fully
* in other threads i read that you need to do factory reset from eRecovery after flashing lineage, do you not have to do that here?
* i could not find information about what this a/ab version is. can you explain?
Click to expand...
Click to collapse
-I can't say that for any gsi for our device but it is subjective nonetheless.
-Signal strength is fixed by AltairFR (iceows). Darkjoker360 (Simone) included his fix in his latest emui 8 los 18.1 build as well.
-Fingerprint as in sensor or build fingerprint? Fingerprint sensor will say failed to enroll if you had fingerprint enrolled in emui but did not remove it from emui settings. Factory reset should remove it as well. As for wifi, if you install this rom on top of latest emui build wifi will work just fine. But if you switch your kernel to something else other than stock or harmonyos based kernel it will not connect to wifi. This is not related to rom.
Emui version <9.1.0.300 : You can use any kernel
Emui version >9.1.0.300 : You can only use stock kernel from your emui version or harmonyos based ones. (Turex posted a test kernel in his thread) if you want functioning wifi.
-Google pay is not present in my country so I can't test but it is possible to pass safetynet which should allow you to use it ig.
-As long as twrp you use works properly it shouldn't matter.
-Instructions is missing a step atm, you don't need to do a factory reset if you flash an additional zip file before flashing AGPS patch. 1-Huawei-DataPrep-Crypt-AB to keep encryption or 1-Huawei-DataPrep-DeCrypt-AB to remove it. These zips replicate folder structure of factory reset so you don't need to "reboot, flash stock recovery, factory reset, reboot, flash twrp". Wait for updated instructions or check the link below instructions (Vanilla GSI steps in Flashing Any GSI part).
-AB in gsi builds means system-as-root which p20 lite is. AB in device means a and b slots for each image which isn't present in p20 lite. In short you use A-only builds in emui 8 vendor but use AB builds in emui 9 vendor. Since AltairFR builds for both vendors his sourceforge includes a and ab zips and builds. If it says A, it's not for emui 9 vendor.

Update AGPS fix and Google Apps

hi thanks for the ROM but, i putted correct wifi password but it doesn't work. Why?

freddie993 said:
hi thanks for the ROM but, i putted correct wifi password but it doesn't work. Why?
Click to expand...
Click to collapse
Wifi password on wpa3 ?

AltairFR said:
Wifi password on wpa3 ?
Click to expand...
Click to collapse
No wpa2, I also tried to Hotspot from another device without protection and doesn't work again

I've had this kind of problem before. It usually comes from the kernel or the emui version. What version are you on?

AltairFR said:
I've had this kind of problem before. It usually comes from the kernel or the emui version. What version are you on?
Click to expand...
Click to collapse
i have emui 9

freddie993 said:
i have emui 9
Click to expand...
Click to collapse
Ok but indicate minor version please

scuse me, what does minor version means? i read android 12, version lineageOS: LeaOS i don't have other information.
When i go to the update section, it gives me an error "your device does not support OTA updates!"

freddie993 said:
scuse me, what does minor version means? i read android 12, version lineageOS: LeaOS i don't have other information.
When i go to the update section, it gives me an error "your device does not support OTA updates!"
Click to expand...
Click to collapse
Minor version of emui 9. my version is 9.1.0.405 and you?
Please exec to have exact of your emui version :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION

ah ok, i didn't understand, i already have those information . Please check this thread , in one post i had attached the image with those information.
Thank you

Ok , try phenix kernel please , version 4.9.235 phenix 1.0, it is my kernel on my ANE-LX1:
[GUIDE] [EMUI9] P20 Lite Basics
Special key combos: Power + Vol+ = Recovery Mode While USB connected, Power + Vol+ = Erecovery Mode While USB connected, Vol- = Fastboot Plug USB while holding down Vol+ + Vol- = Download Mode Power + Vol+ + Vol- = Force Dload Flashing Any GSI...
forum.xda-developers.com
Because you have version emui > 300
[KERNEL][EMUI 9][P20 lite] Phenix kernel
PHENIX KERNEL Disclaimer: Use this kernel at your own risk. Flashing it may brick your device. I'm not responsible for any software/hardware and any kind of damages/losses. NOTE : Use only on EMUI9 base(stock or custom) REQUIREMENTS ...
forum.xda-developers.com

Ok, I must follow the first link??

freddie993 said:
Ok, I must follow the first link??
Click to expand...
Click to collapse
Yes or just flash kernel in the attachment of the second link

What does "DRM patch for EMUI 9.1.0.405" do?
Another question: I can not pass SafetyNet. I have tried to remove root using PHH Settings => Misc Settings => Securize, but it does nothing. Even if I install PHH's SuperUser app (the Google Play does not have one any more, so I used v.1.0.3.3 from another source) I can not get it to work. I understand I am missing something, but do not know what. Any help would be appreciated.

luka_bubi said:
What does "DRM patch for EMUI 9.1.0.405" do?
Another question: I can not pass SafetyNet. I have tried to remove root using PHH Settings => Misc Settings => Securize, but it does nothing. Even if I install PHH's SuperUser app (the Google Play does not have one any more, so I used v.1.0.3.3 from another source) I can not get it to work. I understand I am missing something, but do not know what. Any help would be appreciated.
Click to expand...
Click to collapse
DRM allows you to play protected videos in Chrome or Netflix. Without this chrome patch freeze as soon as there is a video. If you need to be root use the dynamic root option (treble setting) If you want to pass safetynet install the pixel experience instead

Database Info

welcome