[Q] How to update Open Kirin LOS GSI - Honor 6X Questions & Answers

I am running LOS Beta 4 from openkirin. They've released Beta 5. How do I update to it. I assume I'm using the fastboot command like I did to install Beta 4. Do I need to do the factory reset? Is there a way to update without losing all my data?

No wipe or reset is needed when you update. Just flash the new version via fastboot. If you switch to another rom like Omnirom you need a factory reset and stock ramdisk (if you have installed Magisk).

What if i have installed magisk with twrp? Can i update ROM ir do i have yo flash stock ramdisk first?

Related

Updating to 9.0.2 on a rooted device

Will there be any incompatibility issues with magisk and xposed?
No problem with rooted device on updating, althought you will get unrooted once you update with OTA.
Also, there is no xposed for Pie.
Not yet faced any issues. After OTA update done don't reboot the device. just come to Magisk manager -> install -> select install after OTA option and reboot so that you won't lose root.
Ok, I will stay on oreo for now then. Does Pie run better than Oreo on stock?
Should've read this **** before updating to Pie.
Currently in a bootloop after going from oreo to Pie :'(
What is the latest version of Oreo I should be able to get to with Xposed on OP6?
I faced some issues. After updating to 9.0.2 TWRP and Magisc were gone. So had to reroot and reinstall TWRP via fastboot.
Yes.. this will ALWAYS happen. if you want to keep root when doing OTA you have to do this after install is done, but before reboot!
open magisk app
press downloads
search for TWRP A/B
Install that module ( :::::...:.:..:...::::O NOT REBOOT:::::...:.:..:...::::
Go to main screen of magisk again
press install
press install to inactive slot (after ota)
NOW you can reboot and all will be kept.
If you do it from TWRP (like i prefer, since its just faster)
Flash full rom
flash Twrp (blu_spark latest)
reboot to twrp
flash magisk (latest)
done.
flashing roms will ALWAYS override recovery and boot partition
If I understand you precisely, you say, that this is a question of OTa roms. I am not very keen for OTA. Would TWRP and Magisk stay when flashing a non-OTA rom? If yes, are there non-OTAs of OOS?
No what I ment was using the update function from within android.
You will ALWAYS override recovery and Magisk. Follow the steps above when you flash..
Always like this from twrp
Flash Rom
Flash Recovery
Reboot to twrp
Flash magisk
And u be good...
OK thanks. I did wrongly to accept the automatic update instead of downloading the zip and install it via TWRP.

Losing TWRP and Magisk after update

I'm running stock ROM on unlocked bootloader with root through Magisk. I've been using TWRP, but changed over to Blu_spark TWRP recently.
Every time I update my OS Ota, I lose TWRP and Magisk. The Magisk app is installed, but the ROM is not rooted. If course, if I try to install patch the system so it's rooted through the Magisk app, it says that it can't unpack the file. If I reboot to recovery to install from there, I get the stock recovery, not TWRP.
I tried to re-install TWRP and Magisk once before, and borked my phone. I had to quote and start from scratch. I lost all data since I wasn't rooted and Titanium Backup would not run.
What is the proper way to get TWRP and Magisk back after an OTA update?
Flash them after you flash update zip. If you don't you will lose recovery and root every time. Gets overwritten by stock recovery. Normal behavior
Sent from my ONEPLUS A6003 using Tapatalk
So you're saying that instead of doing the OTA update, I should download the update from here, and manually update it ? Can I just install the update? I'm rooted, (well, I was) so the OTA will only download the full update. Is that required instead of the update?
I really have to do a full re-install for every update? That sucks. A lot.
Full reinstall? No. You just have to flash the full ROM. This doesn't mean, you'll loose all your data: Just TWRP, Magisk and (if you have it) your custom kernel. You only have to flash TWRP (or simply boot into it), Magisk and kernel (again: if you have it) after the update. Done.
MickyFoley said:
Full reinstall? No. You just have to flash the full ROM. This doesn't mean, you'll loose all your data: Just TWRP, Magisk and (if you have it) your custom kernel. You only have to flash TWRP (or simply boot into it), Magisk and kernel (again: if you have it) after the update. Done.
Click to expand...
Click to collapse
Ok. Cool. I tried that last time, but it failed. As a result, I'm a bit anxious about doing it again. Hopefully, I won't have any problems this time.
Thanks for the info.
I have had similar troubles as you, here's an overview of how to solve those problems.
OTA through OS:
Download and install OTA
Use Magisk Manager to download the TWRP A/B retention script and install it
Install Magisk to current and inactive slot
Reboot
Guys I am using latest blu_spark twrp. my bootloader is unlocked and I am running oxygenOS openbeta23. Following is my problem.
My flash order: (Note: already I have bue_spark twrp recovery running without issues)
1. Flash the full OTA(openbeta)
2. Flash the blu_spark twrp zip file on both active and non active slots.
3. Flash the latest magisk zip file. If step 3 is not successful means I will try to reboot in to recovery and again flash the magisk installer zip.
Until some time back all this worked fine. But for last 2-3 times although the flashing process of twrp zip on both slots ends with success message, when I reboot to recovery from twrp in order to flash magisk, the device boots in to stock recovery. I don't know how even after flashing twrp zip on both slots successfully why the devices bootbback to stock recovery. Then to have blu_spark twrp I have to connect my device to a computer in fastboot mode and then boot in to custom recovery using the blu_spark twrp image file and again flash the blu_spark twrp zip file which is inconvenient and also requires a computer.
Am I missing anything here?? If yes why this method was working perfectly before? Please somebody help.
Regards,
Sivabalan K
I flash in following order my stable updates
Flash full rom zip
Flash bluespark recovery
Restart into bluespark recovery
Flash magisk
Restart into Android
Everything works flawless. Magisk installed with all the modules running
Hi guys,
Don't you need to disable lock pattern/PIN or fingerprint/face ID? And don't need to uninstall magisk modules?
I never update my OP6 from my initial unlock/twrp/magisk and I'm a bit anxious to do it now...
Thanks
PS : I'm using original twrp (3.2.3-1), is this a problem?

Ota and twrp

Hello guys, i have a question. What is the proper way of flashing miui updates from twrp. Atm i am on 10.2.2.0 but a new pie udpate has been released and i want to update to it. Also, do i need a certain recovery? I am on pitchblack atm.
I just don't want to brick my phone. Thanks in advance.
You can flash with no problem.
But after flash you lose twrp (it will be stock recovery). Need it reflash.
I successfully updated to pie, but a problem emerged. I can no longer flash magisk. Flashing magisk results in a bootloop and when i uninstall it from the recovery, the phone boots normally.
Any suggestions?
Did you flash that zip "lazyflasher"? For the dm verification thing.

How to revert OnePlus 7 Pro to official stock ROM ?

I installed LineageOS 18.1 using the official LineageOS installation guide .. How can I revert OnePlus 7 Pro to official stock ROM ?
spacecc said:
I installed LineageOS 18.1 using the official LineageOS installation guide .. How can I revert OnePlus 7 Pro to official stock ROM ?
Click to expand...
Click to collapse
I just did this today. I was coming from Pixel Experience. It's super simple. You will lose all your data.
Download the FULL OTA to your computer: (This is a link to global version)
REMOVE any security settings you have -- pin, etc. (not sure if this is necessary, but i did it anyways)
Reboot to TWRP / Recovery
Wipe system / data
Reboot recovery again (don't worry if you cannot access the internal storage from your computer, that will get fixed after flashing)
Plugin phone to computer
Enable sideloading
Install the OTA zip by sideloading with ADB
Bash:
adb sideload OTAFilename.zip
Reboot after flash and wait several minutes
Done.
slgooding said:
I just did this today. I was coming from Pixel Experience. It's super simple. You will lose all your data.
Download the FULL OTA to your computer: (This is a link to global version)
REMOVE any security settings you have -- pin, etc. (not sure if this is necessary, but i did it anyways)
Reboot to TWRP / Recovery
Wipe system / data
Reboot recovery again (don't worry if you cannot access the internal storage from your computer, that will get fixed after flashing)
Plugin phone to computer
Enable sideloading
Install the OTA zip by sideloading with ADB
Bash:
adb sideload OTAFilename.zip
Reboot after flash and wait several minutes
Done.
Click to expand...
Click to collapse
I am trying now since 5 over 5 hours to get stock OS for my 7T (hotdogb) with LOS 20 back to stock OS cause of safety net not working as well as some other stuff which i want to reset… But i am unable to install neither TWRP nor default stock OS. I am stuck with LOS recovery and cant install stock OS cause LOS is newer, and it would be a downgrade, letting it fail the upgrade via ADB. I tried with payload dumper and there the partitions are locked even tho oem is unlocked. I ran out of ideas, anything I can try?
Regarding TWRP: i tried both stock and other rom version, it did not work.
hypethetime said:
I am trying now since 5 over 5 hours to get stock OS for my 7T (hotdogb) with LOS 20 back to stock OS cause of safety net not working as well as some other stuff which i want to reset… But i am unable to install neither TWRP nor default stock OS. I am stuck with LOS recovery and cant install stock OS cause LOS is newer, and it would be a downgrade, letting it fail the upgrade via ADB. I tried with payload dumper and there the partitions are locked even tho oem is unlocked. I ran out of ideas, anything I can try?
Regarding TWRP: i tried both stock and other rom version, it did not work.
Click to expand...
Click to collapse
I think you need MSM tool,it's pretty straight forward.Why bothering with trwp.

Question Install official RUI updates from TWRP?

So, I rooted my phone, for which I needed to unlock the bootloader and install TWRP. Now, when I want to install an update on my phone, it downloads and when I want to install it, it jumps to TWRP recovery instead of the phone's recovery, so I can't update my phone. Does anyone know how can I install the updates from TWRP?
Else, reinstall the default recovery. (Only the recovery, not the entire OS since that would un-root my phone)
Thanks.
Edit: After it boots to TWRP, it apparently tries to install the update, since I can see it on the log, but when I reboot my phone it has not installed. It errors: "E3994: This package is for "2169B" devices; this is a "". Updater process ended with ERROR: 1. Error installing zip file '/data/ota_package/OTA/.otaPackage/my_manifest_RMX3370_11.F.04_3040_202302282047.44.36402b59_all.zip'
Edit 2: After failing to install it, it prompts me to re-download it and re-install it, but it jumped from ~500MB update to 4.76GB update.
( may loose data)
I read in telegram channels, this twrp: https://www.pling.com/p/1922292 support installation latest zip. but I haven't tried.
one more thing you can do is ( may loose data)
1. restore twrp backup for recovery partition ( if you don't have backup. search recovery.img in upgrade zip )
2. reboot to recovery to check stock recovery is installed
3. install update
4. then follow steps to install twrp and magisk ( root again )
SanOne+1 said:
( may loose data)
I read in telegram channels, this twrp: https://www.pling.com/p/1922292 support installation latest zip. but I haven't tried.
one more thing you can do is ( may loose data)
1. restore twrp backup for recovery partition ( if you don't have backup. search recovery.img in upgrade zip )
2. reboot to recovery to check stock recovery is installed
3. install update
4. then follow steps to install twrp and magisk ( root again )
Click to expand...
Click to collapse
Your guide is incorrect and will definitely put the device into bootloop.
** The twrp link that you shared doesn't allow system updates to install, it is just a A13 compatable twrp recovery.
1) What if that person has not created any twrp backup of all system partitions? According to his explanation, I'm pretty sure he has not created any backup of the partitions.
2) only flashing recovery image and installing the update will again put the device into bootloop because as confirmed by the OP that his device is rooted and due to root the boot image of the device gets modified so it will put the device into bootloop.
3) unless the OP has stock boot and recovery images at his disposal he should not attempt to install the update to avoid bootloop.
** Kindly avoid sharing incorrect information you aren't sure about the correct procedure.
procedure that I follow to flash updates :
1) in magisk - uninstall magisk - restore images
2) boot device into bootloader and flash stock boot and recovery.
3) boot device and install update.
4) put device again in bootloader and flash twrp and within twrp flash magisk and reboot.
I haven't found any easier way than this. If anyone has, kindly put it below.
There's a way
Rui 4.0 Android 13 f.02
So, any verdict on this new update for the people that did update to it?
forum.xda-developers.com
Recetly I succesfully updated my Realme GT Neo 2 5G via TWRP recovery, the latest version support OTA.
Attention! After update TWPR and Magisk gone. Just reflash twrp and flash magisk normally. No need to reflash modules etc. (Just update from settings, no need to manually flash ota package from TWRP)
Hello mate can u help me with something real quick. Y are there no recent updates for gt neo 2 and if u r using a custom rom based gt neo 2 hows ur experience so far. Thanks in advance
Xemi_KryTeT.pl said:
Recetly I succesfully updated my Realme GT Neo 2 5G via TWRP recovery, the latest version support OTA.
Attention! After update TWPR and Magisk gone. Just reflash twrp and flash magisk normally. No need to reflash modules etc. (Just update from settings, no need to manually flash ota package from TWRP)
Click to expand...
Click to collapse
Which rom r u running and is it good?
Sabirsayed09 said:
Hello mate can u help me with something real quick. Y are there no recent updates for gt neo 2 and if u r using a custom rom based gt neo 2 hows ur experience so far. Thanks in advance
Which rom r u running and is it good?
Click to expand...
Click to collapse
Latest stock (4.0), I'm not going to flash custom roms for now

Categories

Resources