Database Info

[MAGISK] Andromeda Enabler - Enable Andromeda ON DEVICE With a Command!

Hello, folks! I've written a Magisk Module which includes a modified version of the Linux activation script for Andromeda, allowing you to enable Andromeda with a single command (two, if you count su)! I was inspired by the OTHER local Andromeda enabler script here on XDA, as I had downloaded it but discovered that it only worked intermittently on my device. Now, I know, you may be thinking to yourself "OP, is there something wrong with you? Andromeda exists so you DON'T have to be rooted!" Yes, this is true. However, from what I've gathered, there is a speed boost from using Andromeda, and that alone makes this worth it for me, and hopefully others. Plus, I was bored and wanted to see if I could make it work.
This module is written to work with Magisk v15. It will NOT work on Magisk v14, however, it is a single binary, so you could very easily extract it and place it on your phone or make a v14 module yourself.
To activate Andromeda, all you have to do is install this module, reboot, launch a Terminal Emulator, and type:
Code:
su
andromeda
Substratum should launch with Andromeda permissions, as if you'd used the Desktop Application.
@saccentekennedy has made an app! Flash the module, install his app, and when you launch his app, it will grant Andromeda permissions! No commands needed! Be sure to thank his post!
https://forum.xda-developers.com/ap...ndromeda-enabler-enable-t3728325/post75053802
UPDATE 1/12/2018 - The script did not properly set SELinux back to Enforcing, this is now fixed. Please update! Thanks to @Floydfire for the heads up

Works perfectly!

I've created a Tasker task to run this... But I can't figure out how to trigger it. In other words, how can I get Tasker to detect that the Andromeda isn't properly running and connected? I know I get a notification when the service goes down. I suppose I could use this as a trigger? Any thoughts?

saccentekennedy said:
I've created a Tasker task to run this... But I can't figure out how to trigger it. In other words, how can I get Tasker to detect that the Andromeda isn't properly running and connected? I know I get a notification when the service goes down. I suppose I could use this as a trigger? Any thoughts?
Click to expand...
Click to collapse
You could potentially use AutoNotifications with Tasker to detect the notification but I'd probably just set the trigger to the device booting or being unlocked, or make a widget with an app, like SManager, so you can just tap it.

I created a little app with Tasker. It works. I've used Tasker plenty but never created an app. Anyway, I don't know if this will work for anyone else, but this works for me at least
You need the Magisk module installed, BTW.

saccentekennedy said:
I created a little app with Tasker. It works. I've used Tasker plenty but never created an app. Anyway, I don't know if this will work for anyone else, but this works for me at least
You need the Magisk module installed, BTW.
Click to expand...
Click to collapse
Works fine for me. I'm gonna link this in the OP, if that's okay with you. What's the code that went into it? Just executes 'andromeda' when you launch it?

PokemonTotalWar said:
Works fine for me. I'm gonna link this in the OP, if that's okay with you. What's the code that went into it? Just executes 'andromeda' when you launch it?
Click to expand...
Click to collapse
Yup! My first app. Lol.

So congrats this is very interesting!
I'm curious, though.. I'm rooted and I've got substratum and magisk 15.x installed (current version). I purchased and installed Andromeda. I downloaded and installed y'alls zip and the apk. Is there a way to check that it's working properly? What I do have is the module in magisk is enabled but the actual Andromeda app keeps closing when I tap it (wasn't sure if it was even supposed to be opened or if it was a background app)

lido said:
So congrats this is very interesting!
I'm curious, though.. I'm rooted and I've got substratum and magisk 15.x installed (current version). I purchased and installed Andromeda. I downloaded and installed y'alls zip and the apk. Is there a way to check that it's working properly? What I do have is the module in magisk is enabled but the actual Andromeda app keeps closing when I tap it (wasn't sure if it was even supposed to be opened or if it was a background app)
Click to expand...
Click to collapse
When you launch it, Andromeda mode should be activated and you can just launch Substratum. You can check if Andromeda mode is on by checking under the Substratum settings. Under System Certification it should say Andromeda mode (Certified). Substratum should also launch after you launch the Andromeda app included here
Sent from my OnePlus 5 using XDA Labs

Ah well sadly it's not activating for me....
I will keep my eye on this though!

lido said:
Ah well sadly it's not activating for me....
I will keep my eye on this though!
Click to expand...
Click to collapse
Have you tried running the commands in the terminal? It might be that the app just isn't working for you for some reason
Sent from my OnePlus 5 using XDA Labs

Yes the terminal emulator works. I was just hoping the app would work to survive a reboot (which I do frequently) I'm just lazy!

lido said:
Yes the terminal emulator works. I was just hoping the app would work to survive a reboot (which I do frequently) I'm just lazy!
Click to expand...
Click to collapse
Do you own Tasker? If you do, I actually made a profile to enable Andromeda whenever I launch Substratum, and I'll upload it if anyone is interested. I don't know how to make an application-triggered task into an app, though.
Sent from my OnePlus 5 using XDA Labs

I have noticed that I can't seem to use this module alongside anything else that also adds to /system/xbin (specifically "Busybox for Android NDK" by osm0sis). Only one seems to stick. I don't know if that's just a side effect of the way magisk works or an issue with one of the scripts. Could anyone provide any insight into this issue?

qwer777 said:
I have noticed that I can't seem to use this module alongside anything else that also adds to /system/xbin (specifically "Busybox for Android NDK" by osm0sis). Only one seems to stick. I don't know if that's just a side effect of the way magisk works or an issue with one of the scripts. Could anyone provide any insight into this issue?
Click to expand...
Click to collapse
I honestly have no idea, mine works
Sent from my OnePlus 5 using XDA Labs

qwer777 said:
I have noticed that I can't seem to use this module alongside anything else that also adds to /system/xbin (specifically "Busybox for Android NDK" by osm0sis). Only one seems to stick. I don't know if that's just a side effect of the way magisk works or an issue with one of the scripts. Could anyone provide any insight into this issue?
Click to expand...
Click to collapse
I honestly have no idea, mine works fine and I have both enabled. What's your Magisk version and other modules?
Sent from my OnePlus 5 using XDA Labs

PokemonTotalWar said:
I honestly have no idea, mine works fine and I have both enabled. What's your Magisk version and other modules?
Click to expand...
Click to collapse
Magisk Version: 15.2
Device: Pixel 2 XL (Taimen)
Modules:

qwer777 said:
Magisk Version: 15.2
Device: Pixel 2 XL (Taimen)
Modules:
Click to expand...
Click to collapse
I honestly have no idea. It might just be a quirk of the Pixels or something. I have no idea how to fix it. I'll look into it a little to see if something obvious is happening and I'm missing it, but no problems. Can you share your Magisk Log?
Sent from my OnePlus 5 using XDA Labs

Ran this script. Rebooted. My navbar disappeared and all icons went square with no option to change icons back to circle. Pixel 2. Magisk with factory Jan. 8.1. I'm not sure what could have caused this. I had to edit my build.prop to get the softkeys back. I guess no more OTAs for me. Anyone know how to get circle icons back?

btreu1 said:
Ran this script. Rebooted. My navbar disappeared and all icons went square with no option to change icons back to circle. Pixel 2. Magisk with factory Jan. 8.1. I'm not sure what could have caused this. I had to edit my build.prop to get the softkeys back. I guess no more OTAs for me. Anyone know how to get circle icons back?
Click to expand...
Click to collapse
I don't know what would have caused this issue, this script only enables Andromeda, nothing more. Did you do anything in Substratum before rebooting?
Sent from my OnePlus 5 using XDA Labs

[Question] DP 3 and shbstratum?

Hi guys, does anyone of you tried substratum on dp3?
Im running dp3 for a week. Quite stable and fast. So im happy woth it. Just one problem substratum not working at all. I install overlays, it installed successfully but after reboot nothing shows up in a manager tab.
Im rooted.
Susbtratum was working on stock 5.1.9 rooted

meistr91 said:
Hi guys, does anyone of you tried substratum on dp3?
Im running dp3 for a week. Quite stable and fast. So im happy woth it. Just one problem substratum not working at all. I install overlays, it installed successfully but after reboot nothing shows up in a manager tab.
Im rooted.
Susbtratum was working on stock 5.1.9 rooted
Click to expand...
Click to collapse
for me its not even working on stock 5.1.9 rooted... how its working for you
i just want to change my navigation keys and download a theme for substratum
what are the steps?

nitinvaid said:
for me its not even working on stock 5.1.9 rooted... how its working for you
i just want to change my navigation keys and download a theme for substratum
what are the steps?
Click to expand...
Click to collapse
I dont know i just installed over a rooted phone like always. Just not all themes are working for one plus 6, but it at least appear after reboot in overlay manager tab. On dp 3 nothing appears..
There is no speacial instructions for substratum, it installs from a playstore and if you're rooted it will work. Install a theme, configure an overlays, install it, reboot device, after reboot go to overlay manager tab select needed overlays, press Enable it.

nitinvaid said:
for me its not even working on stock 5.1.9 rooted... how its working for you
i just want to change my navigation keys and download a theme for substratum
what are the steps?
Click to expand...
Click to collapse
I used substratum on stock 5.1.9 without root & overlays work perfectly now i am using P beta no more substratum without root sad thing

nitinvaid said:
for me its not even working on stock 5.1.9 rooted... how its working for you
i just want to change my navigation keys and download a theme for substratum
what are the steps?
Click to expand...
Click to collapse
OnePlus navbar is different to stock Android. Themes tend not to work on it.
I'm using Substratum on 5.1.9 pretty successfully but the process for applying themes is more convoluted with the latest security patches. Swift Dark has good instructions included (see pic), but I can't get its inbuilt accent colours to apply

alimuhammadx said:
I used substratum on stock 5.1.9 without root & overlays work perfectly now i am using P beta no more substratum without root sad thing
Click to expand...
Click to collapse
Im on dp rooted substartum mot working. So what u mean by saying that is not wotking without root?

comicbookguy72 said:
OnePlus navbar is different to stock Android. Themes tend not to work on it.
I'm using Substratum on 5.1.9 pretty successfully but the process for applying themes is more convoluted with the latest security patches. Swift Dark has good instructions included (see pic), but I can't get its inbuilt accent colours to apply
Click to expand...
Click to collapse
the images are not loading....

nitinvaid said:
the images are not loading....
Click to expand...
Click to collapse
It's there but it took a while

comicbookguy72 said:
OnePlus navbar is different to stock Android. Themes tend not to work on it.
I'm using Substratum on 5.1.9 pretty successfully but the process for applying themes is more convoluted with the latest security patches. Swift Dark has good instructions included (see pic), but I can't get its inbuilt accent colours to apply
Click to expand...
Click to collapse
if this is the thing that nav bar is different ill try to create a theme for myself

Nope, it says that since the march security patch you have to select overlays, build and enable, reboot, enable overlays again, then reboot again to apply properly

comicbookguy72 said:
Nope, it says that since the march security patch you have to select overlays, build and enable, reboot, enable overlays again, then reboot again to apply properly
Click to expand...
Click to collapse
will try this apply from manager?

meistr91 said:
Im on dp rooted substartum mot working. So what u mean by saying that is not wotking without root?
Click to expand...
Click to collapse
Substratum work on rooted p devices i check in multiple themes but in Android p i can't able to use it without root if i root my device banking apps wouldn't work for me.In Android oreo i used it without root thanks to rootless theming.

I am using Substratum with Swift Black Substratum Theme on Android Pie DP3. Also do not try using systemUI related overlay as it will cause SystemUI Crash. You need to be rooted and TWRP recovery installed.
1. Always Backup.
2. Compile the app overlays in Substratum.
3. Boot into TWRP
4. Mount System Partition.
5. Goto Advanced and File manager.
6. Copy/Move the compiled overlays from /sdcard/.substratum to /system/system/app
7. Reboot the phone. Enable the overlays in Substratum.
P.S: If you accidentally stuck on SystemUI crash, just boot into TWRP file manager and delete the overlay from /system/system/app.
I have read it in Substratum thread. And it works perfectly
Happy Theming

alimuhammadx said:
Substratum work on rooted p devices i check in multiple themes but in Android p i can't able to use it without root if i root my device banking apps wouldn't work for me.In Android oreo i used it without root thanks to rootless theming.
Click to expand...
Click to collapse
Man is not working! There is themes in playstore which supports android p, but not an oxygen os P..
My banking apps working with root i was rooted 5.1.9+twrp, my banking app was working, I was using google pay and substratum...

meistr91 said:
Man is not working! There is themes in playstore which supports android p, but not an oxygen os P..
My banking apps working with root i was rooted 5.1.9+twrp, my banking app was working, I was using google pay and substratum...
Click to expand...
Click to collapse
Oh thanks for clarifying

[ROOT] Substratum on Android Pie Beta (Oxygen)

Any one tried substratum theme on Android pie open beta with success? If yes than explain how?
Edit: Works well now. Forget to uninstall Andromeda.
1.)Install substratum (uninstall Andromeda)
2.)Select theme (theming systemui and Android system should avoid it may cause crashes)
3.)Build & Enable
4.)Reboot
4.)Overlay manager
5.)Enable.
Enjoy Black Theme. (Or white or dark)
(Tested with Swift Black)

prins29 said:
Any one tried substratum theme on Android pie open beta with success? If yes than explain how?
Click to expand...
Click to collapse
AOSPui is working pretty good for me. Only quick settings isn't theming for me.
Open substratum
Install overlays
Reboot
Open substratum
Go to substratum manager
Enable overlays
Done.

prins29 said:
Any one tried substratum theme on Android pie open beta with success? If yes than explain how?
Click to expand...
Click to collapse
I also have this problem, seems like it installs fine but after reboot nothing is there anymore. Swift Dark is what I'm trying to use right now

guyverzero said:
I also have this problem, seems like it installs fine but after reboot nothing is there anymore. Swift Dark is what I'm trying to use right now
Click to expand...
Click to collapse
Happened to me on 5.1.11. All you have to do is go to the accent color. Switch it to something different then switch it back. IDK if it'll work for PIE but I would try that. Just flashed over to Pie and I'm just now getting up everything so I'm going to try myself.

guyverzero said:
I also have this problem, seems like it installs fine but after reboot nothing is there anymore. Swift Dark is what I'm trying to use right now
Click to expand...
Click to collapse
Same here. Able to see overlay installed but nothing in overlay manager.
Edit : old post . OP edited.

What did you pick in substratum for android version? Oxygen OS android 8? Or "others?"
It's still not working for me unfortunately, did an accent color change and I've actually never had Andromeda installed at all. Coming from stable Oreo build...

Thought Substratum was blocked in Pie...

Subs is working fine for me with pitch black. Followed the same procedure as in the OP.
tlxxxsracer said:
Thought Substratum was blocked in Pie...
Click to expand...
Click to collapse
Rootless is blocked AFAIK

guyverzero said:
What did you pick in substratum for android version? Oxygen OS android 8? Or "others?"
It's still not working for me unfortunately, did an accent color change and I've actually never had Andromeda installed at all. Coming from stable Oreo build...
Click to expand...
Click to collapse
I tried with others and without theming systemui and Android system. And theme not working on some system apps. May because of material 2 ui (new oxygen apps).

tlxxxsracer said:
Thought Substratum was blocked in Pie...
Click to expand...
Click to collapse
Rootless with Andromeda not supported.
Just flash magisk and acquire root and you are good to go.

justen7723 said:
AOSPui is working pretty good for me. Only quick settings isn't theming for me.
Open substratum
Install overlays
Reboot
Open substratum
Go to substratum manager
Enable overlays
Done.
Click to expand...
Click to collapse
I am on Pie Open Beta 1, did the above steps but after reboot, nothing appears in the manager. I am using AOSPui too. How did you get it to work?

+1
Using Swift Black.
Nothing shows in manager before and after reboot.

prins29 said:
I tried with others and without theming systemui and Android system. And theme not working on some system apps. May because of material 2 ui (new oxygen apps).
Click to expand...
Click to collapse
Ob pie substratum is buggy. Here instructions how to get it working:
1. Install latest beta of substartum i think it 1001
2. Disable all magisk modules!
3. Reboot
4. Install overlays that u need
5. Go to file explorer make show hidden files
6. Go to your main storage and there must be folder named . substratum in there will be all installed overlays
7. Copy them and paste into system/app
8. Reboot go to substartum app overlay manager and overlays will be there, enable them, reboot
9. Enable magisk modules
10. Reboot
Youre welcome!

meistr91 said:
Ob pie substratum is buggy. Here instructions how to get it working:
1. Install latest beta of substartum i think it 1001
2. Disable all magisk modules!
3. Reboot
4. Install overlays that u need
5. Go to file explorer make show hidden files
6. Go to your main storage and there must be folder named . substratum in there will be all installed overlays
7. Copy them and paste into system/app
8. Reboot go to substartum app overlay manager and overlays will be there, enable them, reboot
9. Enable magisk modules
10. Reboot
Youre welcome!
Click to expand...
Click to collapse
You don't need all this steps! I'm on Open beta 1 Pie, installed latest substratum beta from telegram channel and belo, mono/art are working great. Off course i'm rooted, you need only to build & compile theme, then reboot then apply it :good:

Without Root you can't use Substratum on Pie right, please change the topic of this thread its misleading!

Hitman478™ said:
You don't need all this steps! I'm on Open beta 1 Pie, installed latest substratum beta from telegram channel and belo, mono/art are working great. Off course i'm rooted, you need only to build & compile theme, then reboot then apply it :good:
Click to expand...
Click to collapse
Im on HOS beta 3, i thought it related to substartum on pie in general, cuz this steps I found on official substratum thread.

meistr91 said:
Im on HOS beta 3, i thought it related to substartum on pie in general, cuz this steps I found on official substratum thread.
Click to expand...
Click to collapse
Exactly my point was, these all steps are involved only if your OP6 is rooted, he should've written Root in the title!
Sent from my ONEPLUS A6000 using XDA Labs

jiatern said:
I am on Pie Open Beta 1, did the above steps but after reboot, nothing appears in the manager. I am using AOSPui too. How did you get it to work?
Click to expand...
Click to collapse
U have modules installed in magisk? Try disabling ALL of them first, then proceed to install substratum theme :good:

meistr91 said:
Im on HOS beta 3, i thought it related to substartum on pie in general, cuz this steps I found on official substratum thread.
Click to expand...
Click to collapse
I knew this steps, they're old for the first version of pie with old substratum... I've tested the way i write up, for me it's working without doing all that passages

Hitman478™ said:
I knew this steps, they're old for the first version of pie with old substratum... I've tested the way i write up, for me it's working without doing all that passages
Click to expand...
Click to collapse
On oxygen os yes, in hydrogen beta 3 we still need these steps. Cuz i tried to download latest beta from telegram beta chat, but after installing overlays it not apear in overlay manager, after reboot aswell, just nothing is there.
I found hydrogen os more stable in this beta race so for a while im sticking with it. But it is so annoying to disable everything, reboot, then overlays and all that **** steps

Nope.

Nope.
^Preemptively answering all PMs.

This sounds amazing, May i ask for a very wanted feature? Android 10(Q) battery! If you make this possible ill love you to the ends of the world and donate a bottle of something good lol ?

Thanks for this. Can you tell me if the transcripts for screened calls are available with this?

mikkis2k said:
This sounds amazing, May i ask for a very wanted feature? Android 10(Q) battery! If you make this possible ill love you to the ends of the world and donate a bottle of something good lol
Click to expand...
Click to collapse
What are you asking for?

lollyjay said:
Thanks for this. Can you tell me if the transcripts for screened calls are available with this?
Click to expand...
Click to collapse
I'm not sure if call screen saves the transcript, but I've interacted with live transcriptions with multiple responses. You can see my screenshots in the other call screen thread.

TotallyAnxious said:
What are you asking for?
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6/themes/magisk-aod-lockscreen-weather-mods-oos-t3847008
"v1.7 (23/04/2019)
- Add Android Q battery icon style"
This, if its possible tho, its weird that the oneplus 6 thats on pie can and we cant, you think its possible? ?

mikkis2k said:
https://forum.xda-developers.com/oneplus-6/themes/magisk-aod-lockscreen-weather-mods-oos-t3847008
"v1.7 (23/04/2019)
- Add Android Q battery icon style"
This, if its possible tho, its weird that the oneplus 6 thats on pie can and we cant, you think its possible? ?
Click to expand...
Click to collapse
No idea. I'll maybe look into it. But it's not something that immediately hits me as "hey I can do that". I'm incredibly lazy and stoned a lot (stage 3 colon cancer survivor). So keep that in mind lol

Well dang, I still can't get call screening even with this. That's the only feature I truly missed when I left pixel 2 xl for a op7pro. I just have the worst luck trying to get it back.
Also I had a super nice stable device on 9.5.13 with root and a lot of nice things and the only reason I even went to 10 was the other thread said it was working on 10 and xxx said it worked on 10 and now I've been on 10.0.1 for 3 days and it's the buggiest thing I've used ever
Sent from my OnePlus7Pro using XDA Labs

spart0n said:
Well dang, I still can't get call screening even with this. That's the only feature I truly missed when I left pixel 2 xl for a op7pro. I just have the worst luck trying to get it back.
Also I had a super nice stable device on 9.5.13 with root and a lot of nice things and the only reason I even went to 10 was the other thread said it was working on 10 and xxx said it worked on 10 and now I've been on 10.0.1 for 3 days and it's the buggiest thing I've used ever
Click to expand...
Click to collapse
It's incompatible with your set up or you didn't follow the directions. (I'm not angry). But I've posted screenshots proving it works
So try eliminating variables till it works.
https://forum.xda-developers.com/on...bling-google-pixel-call-t3946535/post80596215

TotallyAnxious said:
It's incompatible with your set up or you didn't follow the directions. (I'm not angry). But I've posted screenshots proving it works
So try eliminating variables till it works.
https://forum.xda-developers.com/on...bling-google-pixel-call-t3946535/post80596215
Click to expand...
Click to collapse
Well I am on the T-Mobile version converted to international so mine is the gm1915 which you already said might not work. I completely clearer out every magisk module I had, rebooted to a stock rooted phone and things were fine, installed your first module, rebooted things were fine, installed the companion module and get a bootloop. Thankfully I have twrp and uninstalled the companion module and now it boots. I just have a gut feeling it's not going to work on here and I REALLY hate wiping my data so I'm just going to wait and see if someone else makes a breakthrough on the gm1915 model
Sent from my OnePlus7Pro using XDA Labs

spart0n said:
Well I am on the T-Mobile version converted to international so mine is the gm1915 which you already said might not work. I completely clearer out every magisk module I had, rebooted to a stock rooted phone and things were fine, installed your first module, rebooted things were fine, installed the companion module and get a bootloop. Thankfully I have twrp and uninstalled the companion module and now it boots. I just have a gut feeling it's not going to work on here and I REALLY hate wiping my data so I'm just going to wait and see if someone else makes a breakthrough on the gm1915 model
Click to expand...
Click to collapse
Well you didn't follow the instructions. You didn't install Google phone. Please reread.
If you don't install Google phone before flashing the companion. It won't boot.
I provided clear instructions. Follow them and you'll get call screen.
How to install (Magisk Manager or TWRP):
0. Uninstall kirisakura kernel companion, it's included.
1. Install "Anxious7Pro_v*.zip".
2. Reboot.
3. Install google phone apk from apkmirror or just use the apk in the companion module.
4. Set up google phone, i.e. grant all permissions (including "Draw over other apps" and "Modify system settings"), set as default phone app, open app and set up available features.
5. Install "Anxious7ProCompanion_v*.zip".
6. Reboot.
7. Profit.
Also you should pretty much always have BusyBox installed if you're rooted.

TotallyAnxious said:
Well you didn't follow the instructions. You didn't install Google phone. Please reread.
If you don't install Google phone before flashing the companion. It won't boot.
I provided clear instructions. Follow them and you'll get call screen.
How to install (Magisk Manager or TWRP):
0. Uninstall kirisakura kernel companion, it's included.
1. Install "Anxious7Pro_v*.zip".
2. Reboot.
3. Install google phone apk from apkmirror or just use the apk in the companion module.
4. Set up google phone, i.e. grant all permissions (including "Draw over other apps" and "Modify system settings"), set as default phone app, open app and set up available features.
5. Install "Anxious7ProCompanion_v*.zip".
6. Reboot.
7. Profit.
Also you should pretty much always have BusyBox installed if you're rooted.
Click to expand...
Click to collapse
I have no idea what kirisakura kernel companion is, but is compatible with Smurf kernel? Could that be my problem?
I also had Google phone installed before I did this, I preferred it over oos dialer from the start
Sent from my OnePlus7Pro using XDA Labs

spart0n said:
I have no idea what kirisakura kernel companion is, but is compatible with Smurf kernel? Could that be my problem?
I also had Google phone installed before I did this, I preferred it over oos dialer from the start
Click to expand...
Click to collapse
You should follow the instructions. If it says install Google phone, you should do that. If it's already installed that means you should uninstall to install. And it's just a handful of shell script commands. It is NOT the issue.
I'm not trying to be difficult. But you've twice not followed the instructions. If you don't follow them. It won't work.
The instructions were set up specifically for this. The non-boot that is caused by Google phone being installed as a system app prior to being a user app. I have no idea why in hell that would cause a non-boot. But it does. As I said I am very lazy. I did everything I could to make this a one and done module. So I wouldn't have to provide much support.
Kirisakira companion is listed as feature but I actually rewrote it and that will probably be put into the original mod from freak07. It's just to emphasize not needing to install both.

I think it's ridiculous it requires instructions but it's the only consistent way I've found to get all the listed features working. Please please please ? ?? read them carefully and follow them. Meaning the below paragraph is the ridiculous part btw.
It makes no sense Google phone causes a non-boot when installed as system app first. Even in a module by itself. It causes that.
I spent a week figuring out the easiest way to do this. And I got it down to under 10 steps. Please follow them.
I even spent time leanring how the unity module template works ecause the companion module is unity. And I'm really lazy.
Simplified instructions
How to install (Magisk Manager or TWRP):
0. Uninstall Kirisakura kernel companion and Google Phone, if both/either are installed. Reboot if you uninstalled.
1. Install "Anxious7Pro_v*.zip".
2. Reboot.
3. Install google phone apk from apkmirror or just use the apk inside the companion module.
4. Set up google phone, i.e. grant all permissions (including "Draw over other apps" and "Modify system settings"), set as default phone app, open app and set up available features.
5. Install "Anxious7ProCompanion_v*.zip".
6. Reboot.
7. Profit.
If you don't follow the instructions, you'll probably end up in a non-boot/bootloop.

@TotallyAnxious I will post here. I will be doing clean install of Beta 4 in a couple of hours, and post feedback here. One question though... I am a beta tester for Google Phone. Should I not use it, and instead install the nodpi version of latest .APK that you linked?
Sent from my JiaYu S3 using XDA Labs

lollyjay said:
@TotallyAnxious I will post here. I will be doing clean install of Beta 4 in a couple of hours, and post feedback here. One question though... I am a beta tester for Google Phone. Should I not use it, and instead install the nodpi version of latest .APK that you linked?
Click to expand...
Click to collapse
Didn't you just confirm it works with that screenshot? And I use beta too. But I have stable in the companion module and you can use any verison. I just don't want to provide a non stable starting point. I get less issues reported that way haha you'll learn overtime I consider how to minimize the effort I need to put into support beyond the OP. I'm incredibly lazy.

TotallyAnxious said:
Didn't you just confirm it works with that screenshot? And I use beta too. But I have stable in the companion module and you can use any verison. I just don't want to provide a non stable starting point. I get less issues reported that way haha you'll learn overtime I consider how to minimize the effort I need to put into support beyond the OP. I'm incredibly lazy.
Click to expand...
Click to collapse
lol same here (lazy). But I think that testing your modules with clean beta 4 install is worth the time and effort.
Sent from my JiaYu S3 using XDA Labs

lollyjay said:
lol same here (lazy). But I think that testing your modules with clean beta 4 install is worth the time and effort.
Click to expand...
Click to collapse
I don't think it is but I haven't tried beta OnePlus software yet. But I doubt it's gonna be that different with a clean install. Can you post the screenshot here so people see it works? Until it's posted here, people can click the link to see it.
https://forum.xda-developers.com/on...-nolimits-7-0-speed-ram-t3933927/post80645203

TotallyAnxious said:
I don't think it is but I haven't tried beta OnePlus software yet. But I doubt it's gonna be that different with a clean install. Can you post the screenshot here so people see it works?
Click to expand...
Click to collapse
Sure, np
Sent from my JiaYu S3 using XDA Labs

Hi, Ive just followed the instructions and got this working.. but i previously had the google phone installed as system app so went to my uninstaller and uninstalled 3 things, phone, phone .com and android.phone i think it was and now i have no mobile data.
Any idea what i install again to get this back? Thanks!

looking for a good theme for status bar

Just looking for a good theme where i can change the status bar and change clock settings and mobile data settings if on status bar etc
Any suggestions?
Cheers

avid_droid said:
Use substratum.
There is kclock for clock and fonts
There is gravija and dark material OOS for signal Icons
These are substratum modules
Click to expand...
Click to collapse
Thanks
Does it work on Android 10?
Take it that download substratum from play store and then download themes and install them via substratum app?

avid_droid said:
Yes. Must be rooted
Click to expand...
Click to collapse
Yes rooted
Looking at play store now for some

funkyirishman said:
Yes rooted
Looking at play store now for some
Click to expand...
Click to collapse
Also, pretty sure you should use Substratum Lite with Android 10. I was having a few issues with the original Substratum on 10

avid_droid said:
Substratum works perfectly fine. App has been updated for 10 for a while now
Click to expand...
Click to collapse
So Substratum from the play store works on android 10 don't need lite or beta app?
So what's best theme to add date in status bar and show data connections
Mentioned in first reply some these on the play store?

Any themes that can add the date in the status bar?

did not work,substratum never works
---------- Post added at 09:51 AM ---------- Previous post was at 09:49 AM ----------
if you like themes install miui rom and enjoy,only auto rotate and fingerprint do not work

funkyirishman said:
Any themes that can add the date in the status bar?
Click to expand...
Click to collapse
K-Klock. I use xXx no limits magisk rom that has an option to install it. Works great for centering, adding date, changing font. Bunch of stuff you can do with it. You do need to open the app first and configure your settings, build the apk within K Manager then open substratum and install.
If you are not aware, I always get the best results by building and installing, reboot, then enable.
---------- Post added at 11:47 AM ---------- Previous post was at 11:46 AM ----------
ayhanaykut said:
did not work,substratum never works
---------- Post added at 09:51 AM ---------- Previous post was at 09:49 AM ----------
if you like themes install miui rom and enjoy,only auto rotate and fingerprint do not work
Click to expand...
Click to collapse
I've been using substratum for a while now and it always works. You must be doing something wrong to get it working.

GeekMcLeod said:
K-Klock. I use xXx no limits magisk rom that has an option to install it. Works great for centering, adding date, changing font. Bunch of stuff you can do with it. You do need to open the app first and configure your settings, build the apk within K Manager then open substratum and install.
If you are not aware, I always get the best results by building and installing, reboot, then enable.
Click to expand...
Click to collapse
Thanks
Are you talking about the below
https://play.google.com/store/apps/details?id=kpchuck.k_klock
I have xxxnolimits installed but can't find any module in magisk or am I looking in the wrong place?

funkyirishman said:
Thanks
Are you talking about the below
https://play.google.com/store/apps/details?id=kpchuck.k_klock
I have xxxnolimits installed but can't find any module in magisk or am I looking in the wrong place?
Click to expand...
Click to collapse
Looks right. I just had it installed with the xXx-nolimits profile.

Xposed and gravitybox is all you need and is the most reliable, fool proof method to get what you are requesting for clock, date, clock format, and clock locations. Plus I'm sure you will find other options useful as well. I use it for the clock, lock screen shortcuts, and to remove that god awe full blur that OP implemented on Android 10's lock screen music background art.

mookiexl said:
Xposed and gravitybox is all you need and is the most reliable, fool proof method to get what you are requesting for clock, date, clock format, and clock locations. Plus I'm sure you will find other options useful as well. I use it for the clock, lock screen shortcuts, and to remove that god awe full blur that OP implemented on Android 10's lock screen music background art.
Click to expand...
Click to collapse
Where can I get these
Tried themes using substratum but no good

funkyirishman said:
Where can I get these
Tried themes using substratum but no good
Click to expand...
Click to collapse
GravityBox
This is the version of EdXposed I use without issues.
Just curious, but what was wrong with K-klock?

GeekMcLeod said:
GravityBox
This is the version of EdXposed I use without issues.
Just curious, but what was wrong with K-klock?
Click to expand...
Click to collapse
Thanks will have a look at Gravity box. Is it beta version that works?
What exactly does Ed posed do and do I flash them via Magisk.
Tried Kclock and loaded it up via substratum. Then tried simple thing like put clock in status bar in the middle and no joy. Also no option to have date on status bar. Unless I'm missing something?

funkyirishman said:
Thanks will have a look at Gravity box. Is it beta version that works?
What exactly does Ed posed do and do I flash them via Magisk.
Tried Kclock and loaded it up via substratum. Then tried simple thing like put clock in status bar in the middle and no joy. Also no option to have date on status bar. Unless I'm missing something?
Click to expand...
Click to collapse
EdXposed is the xposed framework for Android 10 (maybe earlier too) it is installable through magisk. Which is kinda like magisk, you can download and use different modules. Use the 4.5.5 version I linked.
GravityBox is a module for EdXposed. Install it through EdXposed Manager. Only working version for A10 is the one I link. Beta 10.0.5.
So you have to go into K-Manager first before substratum. Select all your desired options, then hit the bottom right floating button. Now you have to go to substratum and install it.

GeekMcLeod said:
EdXposed is the xposed framework for Android 10 (maybe earlier too) it is installable through magisk. Which is kinda like magisk, you can download and use different modules. Use the 4.5.5 version I linked.
GravityBox is a module for EdXposed. Install it through EdXposed Manager. Only working version for A10 is the one I link. Beta 10.0.5.
So you have to go into K-Manager first before substratum. Select all your desired options, then hit the bottom right floating button. Now you have to go to substratum and install it.
Click to expand...
Click to collapse
TaiChi Xposed is also an option and actually better in my opinion because you can activate and deactivate modules on the fly.

GeekMcLeod said:
EdXposed is the xposed framework for Android 10 (maybe earlier too) it is installable through magisk. Which is kinda like magisk, you can download and use different modules. Use the 4.5.5 version I linked.
GravityBox is a module for EdXposed. Install it through EdXposed Manager. Only working version for A10 is the one I link. Beta 10.0.5.
So you have to go into K-Manager first before substratum. Select all your desired options, then hit the bottom right floating button. Now you have to go to substratum and install it.
Click to expand...
Click to collapse
These are the files that I have
GravityBox_Q_10.0.0-beta-5.apk
magisk-EdXposed-YAHFA-v0.4.6.0_beta.4471.-release.zip
magisk-riru-core-v19.5.zip
EdXposedManager-org.meowcat.edxposed.manager-4.5.2-452-release.apk
These are the right files to install as per the below.
Zip files installed via Magisk but don't reboot after each one
Installation
This procedure assumes you have working Magisk installation.
1) Install Riru and EdXposed modules using Magisk Manager
2) Install EdXposed Manager app
3) Reboot and open EdXposed Manager app to check if EdXposed works and is active
4) Install GravityBox and enable it in EdXposed Manager
5) Reboot