Related
This is a starter thread for getting Nintendo's latest Android app (which has finally come from iOS over three months later), Super Mario Run, to work on Android devices that have been rooted and possibly have no Google Play Store installed. Developers, please contribute your findings!
It worked with root but I got an error when I finished the tutorial. Then I saved my game with a Nintendo account and I cleared game data. I've used magisk hide with this game and I can play again
apfo said:
It worked with root but I got an error when I finished the tutorial. Then I saved my game with a Nintendo account and I cleared game data. I've used magisk hide with this game and I can play again
Click to expand...
Click to collapse
I used magisk too but I can't find where I can hide.. can you help me? Do I need to install a module?
n0m1s said:
I used magisk too but I can't find where I can hide.. can you help me? Do I need to install a module?
Click to expand...
Click to collapse
After you've installed Magisk you just need to go to the Settings in the Magisk Manager APP and enable Magiskhide and then you should See a new tab for Magisk hide in the Manager APP and just select the Apps you want to hide root.
(Sorry for my Bad English)
ApollosRage said:
After you've installed Magisk you just need to go to the Settings in the Magisk Manager APP and enable Magiskhide and then you should See a new tab for Magisk hide in the Manager APP and just select the Apps you want to hide root.
(Sorry for my Bad English)
Click to expand...
Click to collapse
Thanks for that, but it's not working too
ApollosRage said:
After you've installed Magisk you just need to go to the Settings in the Magisk Manager APP and enable Magiskhide and then you should See a new tab for Magisk hide in the Manager APP and just select the Apps you want to hide root.
(Sorry for my Bad English)
Click to expand...
Click to collapse
I did exactly what you did and it worked fine for me.
So do I flash via twrp the zip in the magisk post?
I use magisk to hide mario but when i pass the tutorial send error 804 5100 and have to delete the Account:.xml located in /data/data/com.nintendo.zara/sharedfolder and then log in with my account so brings my save but i complete 1 course and the same error again and have to do it all over again, does anybody find a solution for this?
Is magisk a supersu replacement or can I just install alongside? It also says it requires 5.x so no 4.4?
Magisk work great for me
simbin said:
Is magisk a supersu replacement or can I just install alongside? It also says it requires 5.x so no 4.4?
Click to expand...
Click to collapse
it is a supersu replacement but the magisk is great and has better functions and the moduls are great, forget the turning off part and the the recovery and flash the zip, the magisk do it all for you!
Mago6246 said:
it is a supersu replacement but the magisk is great and has better functions and the moduls are great, forget the turning off part and the the recovery and flash the zip, the magisk do it all for you!
Click to expand...
Click to collapse
Don't think magisk works with cm12 on Amzn Fire Phone bc bootloader isn't actually unlocked. They should limit SafetyNet to Leaderboards - pretty sure that's what all the fuss is about. Fine, Nintendont take my money!
Magisk Manager won't install Magisk on my rooted S7 Edge. I've read that it's not compatible with Samsung devices right now, don't know if that's true. How else can I make Super Mario Run work?
suhide give me bootloop with lineos so I will try magisk
simbin said:
Is magisk a supersu replacement or can I just install alongside? It also says it requires 5.x so no 4.4?
Click to expand...
Click to collapse
Yes, You can use it alongside with SuperSU.
Hi !
Same error for me... I installed Magisk, uninstalled SuperSU, set the Super Mario App to hide but i still get the error...
Did I miss something ?
Thanks
Rooted Nexus 5 running Cataclysm 6.0.1
Miitomo was patched using a special security bypasser made for it, and also with XPosed and RootCloak. Is there a similar method for those who seem to have issues using Magisk?
I myself haven't tried Magisk. I'll see how it works on my Galaxy S7. :fingers-crossed:
Xda, please merge this thread with the other thread that I made. I accidentally made a duplicate.
I do not have Google Play services installed, and it seems to need it.
I'm currently running Magisk with Magisk Hide on and RootCloak as well and it keeps erroring out. Currently the only workaround I've found is deleting the deviceAccount xml file in the app prefs folder. I have a feeling it has something to do with xposed or safetynet that's causing it to fail. I enjoy the game enough that I wouldn't mind buying it, but not if Nintendo is going to lock users out like this.
The opens and then closes automatically. I manually granted all the required permissions, magisk hide it. Still it isn't working. Currently Im running the latest Havos OS android 9 pie version.
Can anyone help?! Plz.
bank app cannot run on custom ROM and rooted devices
GourabX said:
The opens and then closes automatically. I manually granted all the required permissions, magisk hide it. Still it isn't working. Currently Im running the latest Havos OS android 9 pie version.
Can anyone help?! Plz.
Click to expand...
Click to collapse
Hide, magiskmanager setting, magisk hide and then wipe the app
joke19 said:
Hide, magiskmanager setting, magisk hide and then wipe the app
Click to expand...
Click to collapse
Nope. Not working.
GourabX said:
Nope. Not working.
Click to expand...
Click to collapse
U test this module?
joke19 said:
U test this module?
Click to expand...
Click to collapse
Ok let me try this. I was using the magisk hide option from the hamburger menu..
Edit: Well tried and got the same result as before. . ,??
yono lite working. use this app. i use it work well
Use YONO version 1.23.11, its working fine after hide magisk. After that latest version is not working with magisk hide.
use yono lite
Hello Guys, after I flashed the 20.7.9 EU Beta. I got Safety Net Failed. Is there any way to fix this issue? Thanks.
FYI. My phone is not rooted yet.
Now I already root my phone. And I got this
I wonder if this is related to hardware attestation?
https://www.xda-developers.com/safetynet-hardware-attestation-hide-root-magisk/
edward014 said:
Now I already root my phone. And I got this
Click to expand...
Click to collapse
Apparently, you forgot to hide your magisk with magiskhide in the option. That results in your basic integrity failed.
And for the ctsprofile part, since your evalType showed basic, you may give "Magiskhide props config" a try.
Or, you may just try eu dev 20.7.3, Several reported it passes safetynet check.
Hi all, I passed now the SafetyNet. I just use the MAGISK STABLE and use the command for Magisk Hide Props Config module.
Which commands you used and how exactly did you executed them?
Snah001 said:
Which commands you used and how exactly did you executed them?
Click to expand...
Click to collapse
Use termux and type su -c props and follow or choose the steps that will appear.
I understand but what choice you made in the props?
Snah001 said:
I understand but what choice you made in the props?
Click to expand...
Click to collapse
-Su -c props
-1
-F (Pick certified fingerprint)
-6
-21
-2
-Yes
-Yes
Snah001 said:
I understand but what choice you made in the props?
Click to expand...
Click to collapse
Btw.
Device: Poco F2 Pro
Rooted Magisk Stable 20.4
ROM: Latest beta EU 7.9
Unfortunately doesn't work.
I am on rooted EEA btw.
Tried several fp's but no luck.
The hardware attestation is messing with us.
Snah001 said:
Unfortunately doesn't work.
I am on rooted EEA btw.
Tried several fp's but no luck.
The hardware attestation is messing with us.
Click to expand...
Click to collapse
Give eu a try, they did some effort on the hw attestation or you may try alter some props to fake your phone to another model to get evalType basic.
Simply changing fp is not gonna help on this hw attestation thing.
edward014 said:
-Su -c props
-1
-F (Pick certified fingerprint)
-6
-21
-2
-Yes
-Yes
Click to expand...
Click to collapse
So you use poco X2 fingerprint?
valkyrjur said:
So you use poco X2 fingerprint?
Click to expand...
Click to collapse
I used google. Not Poco X2 or Poco f2 Pro. Dont use also magisk canary. Use stable one
Used Google XL3 and 4 and both did not work.
Also I tried to find in a logcat (after performing the safetynet check) if it states that attestation is hardware backed but couldn't find it in the logcat.
Edit: got Safetynet check to work.
In Playstore it still says "not certified" but safetynet check is now both ok.
Force closed manually Playstore app and it shows now "certified".
Used: https://forum.xda-developers.com/showpost.php?p=83028387&postcount=40658
Snah001 said:
Used Google XL3 and 4 and both did not work.
Also I tried to find in a logcat (after performing the safetynet check) if it states that attestation is hardware backed but couldn't find it in the logcat.
Edit: got Safetynet check to work.
In Playstore it still says "not certified" but safetynet check is now both ok.
Used: https://forum.xda-developers.com/showpost.php?p=83028387&postcount=40658
Click to expand...
Click to collapse
Try force closing, clearing data and cache for the playstore app then restart the app and check again.
pedro1977 said:
Try force closing, clearing data and cache for the playstore app then restart the app and check again.
Click to expand...
Click to collapse
Did you read my edit to my post?
Deleted all app data also as the dev of the zip file recommended.
Snah001 said:
Did you read my edit to my post?
Deleted all app data also as the dev of the zip file recommended.
Click to expand...
Click to collapse
I saw your modules provided about hardware. But I'm not using that one.
Just try Busy Box only and Magisk Hide Props Config Modules and try also to Hide Your magisk manager and Hide your Banking apps as well.
PS: Ignore this reply if you're successfully and no issue with your safetynet check now. Thank you!
As posted I used the zip to change the model name and it works perfect and it shows certified.
Snah001 said:
As posted I used the zip to change the model name and it works perfect and it shows certified.
View attachment 5059129View attachment 5059131
Click to expand...
Click to collapse
Using that module, Both CTS profile and Basicintegrity will True or verified? Also in Playstore? Right? Btw, thanks to this info bro!
Hello guys,
I have poco x3pro and it is running Lineag os 18. Now i have an app called HDFC netbanking but while installing it shows "app does not support rooted device". i have learnt that with Magisk app i can buy pass it. so, how can i do that ? do i have to flash again? yours suggestions are welcomed.
Dezun said:
Hello guys,
I have poco x3pro and it is running Lineag os 18. Now i have an app called HDFC netbanking but while installing it shows "app does not support rooted device". i have learnt that with Magisk app i can buy pass it. so, how can i do that ? do i have to flash again? yours suggestions are welcomed.
Click to expand...
Click to collapse
Did you root with magisk?
If old version
https://xiaomiui.net/how-to-use-magisk-hide-5610/
In Magisk settings, enable Zygisk and Enforce denylist, restart device, go to magisk settings again > configure denylist and check apps you want to hide from root.
NOSS8 said:
Did you root with magisk?
If old version
https://xiaomiui.net/how-to-use-magisk-hide-5610/
Click to expand...
Click to collapse
No i flash with Twrp
Popletenec said:
In Magisk settings, enable Zygisk and Enforce denylist, restart device, go to magisk settings again > configure denylist and check apps you want to hide from root.
Click to expand...
Click to collapse
This is the answer
samsungics1200 said:
This is the answer
Click to expand...
Click to collapse
ok.. but do ihave to flash magisk ?
i have installed app but in magisk app setting i cant see the option mentioned.
Comdirect photoTAN app detecting root
Since version 8.3.0 additional measures to detect root have been added, do not update as MagiskHide won't be able to prevent detection. Until a solution is found I would recommend staying on the previous version for as long as possible. Finding...
forum.xda-developers.com
here is a lengthy thread with another bank, where you can find many many suggestions on how to fix the problem.
i am having x3pro myself using the app mentioned there, but not using LOS18 A11 but Miui A12
with the newer magisk versions
- denylist active
- maybe try shamiko module (denylist enforce off)
- maybe try without shamiko (denylist enforce on)
- maybe magiskhide props config module
- universal safetynet fix
- magisk package renamed
- make sure to enable all options on your denylist application selection to hide all processes
- the application might get root info from google play services (GMS) or play store, where you should also delete cache after making changes and rebooting to see if your change does take effect.
Dezun said:
ok.. but do ihave to flash magisk ?
i have installed app but in magisk app setting i cant see the option mentioned.
Click to expand...
Click to collapse
you need to install the latest version of magisk app and flashable zip suitabe for your android version magisk 23 is for android 11 while magisk 24 is compatible upto latest but flash latest fpr maximum compatibility
Dezun said:
ok.. but do ihave to flash magisk ?
i have installed app but in magisk app setting i cant see the option mentioned.
Click to expand...
Click to collapse
Why don't you try ih8sn since you are on LineageOS.
Was this resolved? I am facing this issue myself at the moment with HDFC App.
ROM - Pixel experience 13 Plus
Device - OP7
Magisk v- 26.1
Universal Safety Net - 2.4.0
Deny List - enabled with many more apps
Example - Gpay, PhonePe, Paytm (All working fine)
YASNAC - Both checks passed
Hello everyone, I just installed another rom for my redmi note 11 which is Project Elixir.
I have successfully installed magisk module viper4android .
BUT when it comes to driver installation it shows error "Error: No such file or directory" and the installation is stuck at 11%.
I have tried many ways like reinstalling but it still doesn't work.
Does anyone know how to fix this error. Help me! I love listening to music so I really need this
What is Magisk V4A module version?
10.16.2020 ?​
jwoegerbauer said:
What is Magisk V4A module version?
10.16.2020 ?​
Click to expand...
Click to collapse
V2.7.2.1 . And magisk just released a new update which is 26.1 so i updated it
The module is heavily outdated: look here
GitHub - Magisk-Modules-Repo/ViPER4Android-FX
Contribute to Magisk-Modules-Repo/ViPER4Android-FX development by creating an account on GitHub.
github.com
It's because of the Magisk version, it also happened to me but I fixed it.
You must uninstall Magisk 26, if you don't know how, just rename "Uninstall.zip" the magisk that you flashed in your recovery, just after a previous version of Magisk is uninstalled, in my case I had Magisk 25 on my SD, with this you will not lose the modules that you had previously installed and you will be able to install Viper without problems.
This worked for me.
hgrocket said:
It's because of the Magisk version, it also happened to me but I fixed it.
You must uninstall Magisk 26, if you don't know how, just rename "Uninstall.zip" the magisk that you flashed in your recovery, just after a previous version of Magisk is uninstalled, in my case I had Magisk 25 on my SD, with this you will not lose the modules that you had previously installed and you will be able to install Viper without problems.
This worked for me.
Click to expand...
Click to collapse
Has been successful. Thank you very much
Ihave same problem, ater i installee magisk to 26 how to fix
fivux69 said:
Ihave same problem, ater i installee magisk to 26 how to fix
Click to expand...
Click to collapse
Looks like my answer above has worked, check it out.
fivux69 said:
Ihave same problem, ater i installee magisk to 26 how to fix
Click to expand...
Click to collapse
I'm too still having this issue despite downgrading to magisk 26
Mr.Blaze said:
Tôi vẫn gặp sự cố nà y mặc dù đã hạ cấp xuống magisk 26
Click to expand...
Click to collapse
try install magisk version 25.2
I had the same problem. I was able to solve with https://github.com/programminghoch10/ViPER4AndroidRepackaged under crdroid.
RichieXX said:
I had the same problem. I was able to solve with https://github.com/programminghoch10/ViPER4AndroidRepackaged under crdroid.
Click to expand...
Click to collapse
I already tried it + many different versions, but unfortunatelly no matter what version I use, i still didn't get it to work
I have a solution.
Install this magisk module
GitHub - programminghoch10/ViPER4AndroidRepackaged: A refined ViPER4Android installer.
A refined ViPER4Android installer. Contribute to programminghoch10/ViPER4AndroidRepackaged development by creating an account on GitHub.
github.com
And then open the app and turn off legacy and compatibility mode (if turned on)
Now still the app somehow doesn't work. To fix this, go to play store, install an app called wavelet. Now open it and set it to legacy mode. Tun it on and turn on some option in it which makes no impact to the sound output.
Now when you go to viper4 Android, it will show processing as yes and it will work.
****Make sure that Master Limiter is turned on
NikhilYT said:
I have a solution.
Install this magisk module
GitHub - programminghoch10/ViPER4AndroidRepackaged: A refined ViPER4Android installer.
A refined ViPER4Android installer. Contribute to programminghoch10/ViPER4AndroidRepackaged development by creating an account on GitHub.
github.com
And then open the app and turn off legacy and compatibility mode (if turned on)
Now still the app somehow doesn't work. To fix this, go to play store, install an app called wavelet. Now open it and set it to legacy mode. Tun it on and turn on some option in it which makes no impact to the sound output.
Now when you go to viper4 Android, it will show processing as yes and it will work.
****Make sure that Master Limiter is turned on
Click to expand...
Click to collapse
I tried your steps, but it doesn't work (version 69 from repo).
The problem is with the installation, not the sound processing.
So we can't do the step "And then open the app and turn off legacy and compatibility mode (if turned on)", because once we open the Viper4android app it tries to install the magisk module, and then it gets stuck.
phmha said:
try install magisk version 25.2
Click to expand...
Click to collapse
This seems to solve the stuck installation issue.
But now after every reboot it tries to install the driver again for me.
I tried different things to fix this (audio modification library, this: https://forum.xda-developers.com/t/...ndroid-10-11-12-devices.4213647/post-86907017 and this: https://forum.xda-developers.com/t/...ndroid-10-11-12-devices.4213647/post-86870983 and this:
https://www.reddit.com/r/Magisk/comments/x1f14z/_/imhmm1c
) but still no luck. Also different versions of viper don't solve this issue.
phmha said:
try install magisk version 25.2
Click to expand...
Click to collapse
This seems to solve the stuck installation issue.
But now after every reboot it tries to install the driver again for me.
I tried different things to fix this (audio modification library, this: https://forum.xda-developers.com/t/...ndroid-10-11-12-devices.4213647/post-86907017 and this: https://forum.xda-developers.com/t/...ndroid-10-11-12-devices.4213647/post-86870983 and this:
https://www.reddit.com/r/Magisk/comments/x1f14z/_/imhmm1c
) but still no luck. Also different versions of viper don't solve this issue.
Edit: This V4A works for me partially (some options are greyed out) with magisk 25.2 (didn't test newer) and legacy mode enabled:
viper4android 0.3.0 - Google Search
RichieXX said:
I had the same problem. I was able to solve with https://github.com/programminghoch10/ViPER4AndroidRepackaged under crdroid.
Click to expand...
Click to collapse
Works perfectly dude, thank you so much
Tested on Android 13, Xiaomi Mi 9T Pro, bootleggers v7.1
Mr.Blaze said:
This seems to solve the stuck installation issue.
But now after every reboot it tries to install the driver again for me.
I tried different things to fix this (audio modification library, this: https://forum.xda-developers.com/t/...ndroid-10-11-12-devices.4213647/post-86907017 and this: https://forum.xda-developers.com/t/...ndroid-10-11-12-devices.4213647/post-86870983 and this:
https://www.reddit.com/r/Magisk/comments/x1f14z/_/imhmm1c
) but still no luck. Also different versions of viper don't solve this issue.
Edit: This V4A works for me partially (some options are greyed out) with magisk 25.2 (didn't test newer) and legacy mode enabled:
viper4android 0.3.0 - Google Search
Click to expand...
Click to collapse
So the issue was Magisk 26?
NikhilYT said:
I have a solution.
Install this magisk module
GitHub - programminghoch10/ViPER4AndroidRepackaged: A refined ViPER4Android installer.
A refined ViPER4Android installer. Contribute to programminghoch10/ViPER4AndroidRepackaged development by creating an account on GitHub.
github.com
And then open the app and turn off legacy and compatibility mode (if turned on)
Now still the app somehow doesn't work. To fix this, go to play store, install an app called wavelet. Now open it and set it to legacy mode. Tun it on and turn on some option in it which makes no impact to the sound output.
Now when you go to viper4 Android, it will show processing as yes and it will work.
****Make sure that Master Limiter is turned on
Click to expand...
Click to collapse
I did it and it works. thank you!
FJiron75 said:
I did it and it works. thank you!
Click to expand...
Click to collapse
Your welcome!