I have an 950U running N950USQS2BQL5 firmware but the boot screen and software is ATT branded.
It's stuck on 7.1.1 for obvious reasons. Is there any way to get it to Oreo besides flashing ATT firmware on it?
Thanks for all help!
If I remember right, the files from Samsung look at the installed sim card and install the correct version from that. You "should" be able to Oden the latest firmware and it will correct itself. It will wipe everything on the phone, so make a backup.
Related
I recently received a T-Mobile Galaxy S6, and it was rooted and had a custom kernel, which was a complete mess (the person who owned the phone previously clearly did not know what they were doing) so I just wanted to restore it back to full stock.
I am decently experienced with ODIN, rooting, custom firmware etc, but I have just done one of the biggest rookie mistakes I have ever done. I had accidentally downloaded the most recent firmware for my G920T, not realizing that the file was not for T-Mobile. It was the (XAR) carrier (I believe that is C-Spire but i could be wrong) and the latest was PK1.
It flashed perfectly and all seemed fine until I decided to unlock the device. The T-Mobile S6 requires the use of the "Device Unlock" app and since I had flashed the wrong ROM, the phone thinks the Device Unlock app is not compatible. When I put a different GSM SIM card in the phone, it prompts me to use the Device Unlock app.
I do not have a previous NANDROID backup from the original T-Mobile ROM, and now that I am on the lastest Bootloader for XAR, it will not let me downgrade. I have tried flashing pretty much every MM bootloader and TWRP for both T-Mobile and XAR and none will work (except for what is currently on the device of course) I always get the error "Device: 5 Binary: 4" (sometimes the binary is 3, depending on which version of MM rom or BL I try)
To sum it all up, I am on PK1 (latest for XAR) and I need a way to get back to the official T-Mobile ROM (latest is PD1). Is there a magic method to get this figured out or am I pretty much stuck with what I got until T-Mobile releases an update that is PK1 or higher?
Thank you in advance to all of you that take your time to help (and I am sincerely sorry if I am posting in the wrong section)
I rooted my note 5 (sm-n920w8) and installed sick as hell rom. Apparently, I installed the t-mobile version of the rom (sm-n920t), as this is what the model number of my phone now says.. I am now trying to unroot my phone, but odin fails to flash the stock firmware for model sm-n920w8. I dont want to just flash the t-mobile firmware, as I am worried it will make the phone useless in my area. Any solutions to this problem?
Was on ATT, unlocked, now on T-Mobile. Phone is 3 yrs old, sketchy; shuts off randomly, has issues. Want to flash firmware, but Sammobile doesn't have 915a. Since it's unlocked and on t-mobile network, can I flash with t-mobile firmware? Can you put any carrier's rom on an unlocked phone? Sammobile has "usa" firmware with no carrier designation.
https://www.sammobile.com/firmwares/galaxy-note-edge/SM-N915R4/USC/
Thanks.
How did it go??
Same phone same problem also on Tmobile now... what did you do??
Use firmware uploaded by makki666
drivesavw said:
Same phone same problem also on Tmobile now... what did you do??
Click to expand...
Click to collapse
Did you find a solution? I flashed the firmware uploaded by makki666 found in another thread on updates for Note Edge from at&t. Right now am using 6.0.1 but may revert to basic 5.1 1 to get temporary root & get rid of bloatware (have not figured out what is worse, outdated OS or bloatware). If you found a better solution, please posr
Getting a new-in-box Note10+ today from Swappa, so I assume it will be on some Android 9.0 TMO firmware. I need to get it onto the Verizon firmware.
SamFirm only gives the latest Android 10 firmwares. (It may be important to note that the VZW and XAA files both have the exact same filename: SM-N975U1_10_20200118102941_hj8esiossq_fac)
Is it safe to open the box > go straight into download mode > flash the newest VZW firmware via Odin?
Or are there other things I should do first? For example (in no particular order):
- first boot
- updating the software via settings
- flashing XAA firmware, THEN first boot with verizon sim already in phone per this thread, THEN flash VZW firmware
Thank you. Also any other suggestions are welcomed.
finshan said:
Getting a new-in-box Note10+ today from Swappa, so I assume it will be on some Android 9.0 TMO firmware. I need to get it onto the Verizon firmware.
SamFirm only gives the latest Android 10 firmwares. (It may be important to note that the VZW and XAA files both have the exact same filename: SM-N975U1_10_20200118102941_hj8esiossq_fac)
Is it safe to open the box > go straight into download mode > flash the newest VZW firmware via Odin?
Or are there other things I should do first? For example (in no particular order):
- first boot
- updating the software via settings
- flashing XAA firmware, THEN first boot with verizon sim already in phone per this thread, THEN flash VZW firmware
Thank you. Also any other suggestions are welcomed.
Click to expand...
Click to collapse
100% safe to immediately flash VZW firmware. The phone wont know any difference if you booted it first or not.
Youdoofus said:
100% safe to immediately flash VZW firmware. The phone wont know any difference if you booted it first or not.
Click to expand...
Click to collapse
Thank you. And I just noticed this is the Note 10 forum not the 10+ forum (thanks google)...
What about concerns per the thread I linked where flashing VZW firmware is still recognized as a TMO device unless you boot the XAA firmware with the verizon sim before flashing the VZW firmware? Is that an old issue that's no longer a problem now?
The device won't mind that I'm jumping from an older version of Android to a newer version? What about the bootloader version, when does that get updated, as I understand it's currently on version 2 and how will that affect this process?
Thanks again, you post was short and being an $800 device I obviously am trying to have all my bases covered before messing with it.
finshan said:
Thank you. And I just noticed this is the Note 10 forum not the 10+ forum (thanks google)...
What about concerns per the thread I linked where flashing VZW firmware is still recognized as a TMO device unless you boot the XAA firmware with the verizon sim before flashing the VZW firmware? Is that an old issue that's no longer a problem now?
The device won't mind that I'm jumping from an older version of Android to a newer version? What about the bootloader version, when does that get updated, as I understand it's currently on version 2 and how will that affect this process?
Thanks again, you post was short and being an $800 device I obviously am trying to have all my bases covered before messing with it.
Click to expand...
Click to collapse
you cannot go backwards in bootloader revisions, but you can go backwards in android versions as long as theyre on the same BL revision(not likely, but who knows? I didnt look yet). Also, the worst thing that could happen if you try to flash an older BL version is that itll fail in Odin and will still allow the phone to boot normally (usually, and if it doesnt, its still fixable). The only issue with booting it after flashing new firmware with your current sim is that itll install the carrier specific stuff on the phone so long as the CSC needed for that is in the multi CSC pack you flashed on the phone, and if it does install the carrier crap you dont want, just factory reset it and reboot with the actual sim you want you use
no problem man, thats what we are here for
So both my phone and vzw branded phone are same model, and android 11 firmware is out for verizon and my phone received the G715U1UEU7BUC3 ota 11. Is the latest Odin software and verizon G715USQU7BUC1 firmware what i need to get it done?
Also, do i need to do the full flash or can i get by with just one file that includes all the vzw bloatware. From what ive read i can get by with flashing just the userdata file. Once complete ive also read i need to do a factory reset and that it can be done i DL mode. Is that true? Finally can i leave my sim in for this or should it be out
?
?
Anybody??
Not even a response from Europe where they must hand these xcover pro's out with every gas tank fillup.
I have the latest version of odin installed and downloaded the verizon ota firmware G715USQU7BUC1 and am ready to give it a shot. I would just like a little confirmation im on the right track. Bootloader versions are the same. (bootloader is still locked) Even a grunt would do..........