Database Info

How to Root Desire w/ HBoot 1.06

Have a US Cellular HTC Desire CDMA.
Android 2.2
HBoot - 1.06.0000
Radio - 2.15.00.11.16
Unrevoked method of Rooting fails.
Other thoughts?

Unfortunately, I do not have an answer. I am having the same issue. If I find anything I will pass it on.

Okay I've got temporary root at least. An app called visionary, not available on the market so google that to find a download, it is a one click solution. Temp Root option works but Permanent Root does not. It takes longer to boot and has to run every time you turn your phone on. Kinda a pain but its steps in the right direction.

So as I was searching the Cyanogen forums I got a suggestion. It ended up working great for me. I ran Z4root. I ran the app selected the permanent option and let it run for about 2 min. It will just stay "rooting". I shut the phone off and restarted it. Once the phone was loaded I ran SuperUser and it ran fine. I ran AdFree, Quickboot, and Titanium backup. the only issue is with Titanium back up and it only restored some apps before closing. Not a big deal because I only wanted a few. I think it would work if I backed up on 2.2 rather than bringing 2.1 saved app with data and try to restore on 2.2. All credit goes to dontbrickit on cyanogen forums. I used the quickboot and rebooted the phone and I still had root, so it does not seem to be temporary.

I tried z4root with no results. It says rooting, goes through the whole process then reboots. No root after. Temp root feature doesn't function either. Are you running the newly released uscell rom?

HBOOT 1.06 fail
Although I have never posted I have followed the works and efforts of the very skilled developers and pro-active user for some time now and I would like to say my hats off to you all, this is by far one of the most productive and progressive communities have seen yet, I digress. I’m having an issue with hboot 1.06 also, I was running CM6 (very happy with it I might add) but when uscc came with the OEM 2.2 I rolled back to 2.1 so that I could go forward with the provider update. This process went fine, I cleared tcash and sys cash wiped and installed OEM. Turns out uscc OEM sucks bad. I only did it for htc sense and it s NOT WORHT IT. HTC sense is cool but not worth the internal memory loss I have taken. CM6 had me at over 275mb free on fresh install, OEM 145ish….FAIL. not to mention its laggy as hell on the surface. So want to go to CM7 the issue is when did the OEM it broke my hboot, when go to recovery it takes me to some blue text I can choose but its update.zip CC, reboot and factory reset. I have used clockwork 15 ways, tried 3 htc syncs that all connect but the same thing happens,,,, when any of these apps get to the hboot it does the same thing BLUE TEXT, I have tried to port old backups as well and nothing can get past this broken hboot 1.06. any suggestions?

have a thread for this going here

rhoover said:
have a thread for this going here
Click to expand...
Click to collapse
.......had

This is how I rooted mine
Guide to rooting Branded 2.2 Froyo Desire with 1.06 HBoot
My Software Information
Android Version - 2.2
Baseband Version - 2.15.00.11.16
Kernal Version - 2.6.32.21-g7a207a4 | [email protected] #1
Build Number - 2.11.573.5 CL325935 release-keys
Software Number - 2.11.573.5
Browser Version - Webkit 3.1
PRI Version - 1.70_027
PRL Version – 15106
My HBoot Information
Bravoc DVT2 SHIP S-OFF
HBOOT-1.06.0000
Microp-051e
Touch Panel-Synt0101
Radio-2.15.00.11.16
Dec 22 2010, 16:16:39
Info - I have a US Cellular Branded CDMA Desire. I have owned it for 3 months. Came with 2.1 Eclair, I was unhappy waiting for 2.2 so I rooted and flashed a couple different roms. I ended up with a Custom Froyo w/ Sense and a few Gingerbread features. I found out about update release for US Cellular so before updating I reset factory settings restoring phone to stock Eclair. Took phone to store, they upgraded to Froyo I played for a few days until I wanted to reroot my phone. Unsuccessful on at least 5 different tries with both Windows/Linux and many different options of unrevoked and settings. Found out that 1.06 HBoot was unsupported by unrevoked. So I studied what other people posted about their attempts and ideas. Found one person claiming to have rooted theirs. Unfortunately he did not give many details in his post about the exact process. Here are the steps I took to successfully root my phone.
Backup any data, media, programs you wish to your SD card.
Transfer your backup from your SD card to your PC.
Go to Settings>SD & Phone Storage
Click “Unmount SD Card”
Click “Format SD Card”
This will clear anything you may have saved to it, which might interfere with rooting/flashing
Once Formatting is complete
Click “Mount SD Card”
Now it is time to reset phone to stock 2.2
Go to Settings>SD & Phone Storage (You should already be there, unless you went back/home)
Click “Factory Data Reset”
Click “Reset Phone” in next menu
Phone should reset and reboot bringing you into a tutorial (US Cellular, unsure on other carriers)
Skip through all prompts
DO NOT edit/change/add anything
You should now be at the Home Screen
Go to Settings>Applications>Development - Enable (Green Check) “USB debugging”
Go to Settings>Applications - Enable (Green Check) “Unknown Sources”
Go to Settings>Connect to PC>Default Connection Type – Select (Green Circle) “Charge Only”
Go to Settings>Connect to PC – Disable (NO Green Check) “Ask Me”
Press Home Button
Put Phone Down
Leave Phone On (Do not power down) & Do Not Touch Phone until Told To
Your phone is ready to begin rooting.
You can attempt to use Windows if you really wish, but I find Linux to be a no-hassle idiot proof OS. Many people run across issues with either drivers, or sync, or possibly other factors.
Linux solves this issue by having an all-in-one OS. It already contains the drivers needed, and does not require installing or uninstalling of anything.
Evidently there’s a **** ton of options when it comes to Linux.
I used Ubuntu Desktop Edition 32-bit
I recommend using the same because my steps follow that.
Go to Ubuntu Dot Com *I can't post links yet"
Ensure Latest Version (10.10 when guide was made)
Ensure correct bit (32 or 64)
Click “Start Download”
If 10.10 32bit (693 MB)
If 10.10 64bit (695 MB)
Once download complete you will need to Burn the ISO as an “image” to a CD.
If unsure how to do this seek help elsewhere (it’s very simple)
You should now have a bootable trial Ubuntu CD
If your Internet is Wired you are set to continue if Internet is Wireless Router I recommend obtaining unrevoked because restart.
If Wireless
Go to Unrevoked Dot Com *I can't post links yet" and click “Download for Linux”
Save to Desktop
Once complete transfer “reflash.tar.gz” to USB Stick Drive
Remove Stick Drive
Insert Ubuntu into CD drive and close drive
Take steps needed to ensure Boot CD is activated upon restart
Once ready restart PC
CD should boot and “Welcome” screen displayed
Select “English”
Click “Try Ubuntu”
You should be brought to a “Desktop” containing two icons “Examples & Install Ubuntu 10.10”
If Wired
Click “Mozilla Icon” on the taskbar on the top of screen
Go to Unrevoked Dot Com and click “Download for Linux”
Open “Reflash.tar.gz” and Extract to Desktop
Close ALL open windows
Go to Applications>Accessories – Click “Terminal”
In the “Command Prompt Looking” Window type the following lines each follow by “Enter”
cd Desktop
chmod +x reflash
sudo ./reflash
Please Leave Terminal open
Unrevoked 3 should now be open
Connect USB Cable to Computer
With USB Cable connected
Connect Phone to USB (Yes you can now touch your Phone)
Unrevoked should recognize Phone and a “Prompt” should be displayed
Click “Ok/Yes” whatever it says I forgot I was so excited to not see another FAIL MSG
Sit Still DO NOT touch ANYTHING
Be patient phone will reboot multiple times
Should eventually see Phone Boot into the HBoot Menu
It will install clockworkmod
Phone will enter recovery menu
Unrevoked Window will hopefully eventually say something like
“Complete Safe to Disconnect and Reboot”
NOTE – Both my Terminal on Ubuntu & Recovery displayed multiple “Installation Aborted”, “Update Failed”, “ERROR”, and “Unsupported” lines in the log.
At this point you should be Successfully Rooted, and safe to reboot.
Superuser should be displayed in the app list
I’m not sure in what order I did what but I installed “Titanium Backup Free Edition” “Busy Box” and “Root Check” and played with each until Root Check displayed that I had both “Root Access and Busy Box Installed”
I do hope this works for you as it did for me. I refused to stay “unsupported by unrevoked” until a fix was available. I will try to help anyone with clarification in steps, or any questions/problems. I did find out that a version of Linux called “Slax” is available that has “root permissions” contained already. Which eliminates the entire “Terminal” step making it unneeded?

ethahes said:
Guide to rooting Branded 2.2 Froyo Desire with 1.06 HBoot
My Software Information
Android Version - 2.2
Baseband Version - 2.15.00.11.16
Kernal Version - 2.6.32.21-g7a207a4 | [email protected] #1
Build Number - 2.11.573.5 CL325935 release-keys
Software Number - 2.11.573.5
Browser Version - Webkit 3.1
PRI Version - 1.70_027
PRL Version – 15106
My HBoot Information
Bravoc DVT2 SHIP S-OFF
HBOOT-1.06.0000
Microp-051e
Touch Panel-Synt0101
Radio-2.15.00.11.16
Dec 22 2010, 16:16:39
Info - I have a US Cellular Branded CDMA Desire. I have owned it for 3 months. Came with 2.1 Eclair, I was unhappy waiting for 2.2 so I rooted and flashed a couple different roms. I ended up with a Custom Froyo w/ Sense and a few Gingerbread features. I found out about update release for US Cellular so before updating I reset factory settings restoring phone to stock Eclair. Took phone to store, they upgraded to Froyo I played for a few days until I wanted to reroot my phone. Unsuccessful on at least 5 different tries with both Windows/Linux and many different options of unrevoked and settings. Found out that 1.06 HBoot was unsupported by unrevoked. So I studied what other people posted about their attempts and ideas. Found one person claiming to have rooted theirs. Unfortunately he did not give many details in his post about the exact process. Here are the steps I took to successfully root my phone.
Backup any data, media, programs you wish to your SD card.
Transfer your backup from your SD card to your PC.
Go to Settings>SD & Phone Storage
Click “Unmount SD Card”
Click “Format SD Card”
This will clear anything you may have saved to it, which might interfere with rooting/flashing
Once Formatting is complete
Click “Mount SD Card”
Now it is time to reset phone to stock 2.2
Go to Settings>SD & Phone Storage (You should already be there, unless you went back/home)
Click “Factory Data Reset”
Click “Reset Phone” in next menu
Phone should reset and reboot bringing you into a tutorial (US Cellular, unsure on other carriers)
Skip through all prompts
DO NOT edit/change/add anything
You should now be at the Home Screen
Go to Settings>Applications>Development - Enable (Green Check) “USB debugging”
Go to Settings>Applications - Enable (Green Check) “Unknown Sources”
Go to Settings>Connect to PC>Default Connection Type – Select (Green Circle) “Charge Only”
Go to Settings>Connect to PC – Disable (NO Green Check) “Ask Me”
Press Home Button
Put Phone Down
Leave Phone On (Do not power down) & Do Not Touch Phone until Told To
Your phone is ready to begin rooting.
You can attempt to use Windows if you really wish, but I find Linux to be a no-hassle idiot proof OS. Many people run across issues with either drivers, or sync, or possibly other factors.
Linux solves this issue by having an all-in-one OS. It already contains the drivers needed, and does not require installing or uninstalling of anything.
Evidently there’s a **** ton of options when it comes to Linux.
I used Ubuntu Desktop Edition 32-bit
I recommend using the same because my steps follow that.
Go to Ubuntu Dot Com *I can't post links yet"
Ensure Latest Version (10.10 when guide was made)
Ensure correct bit (32 or 64)
Click “Start Download”
If 10.10 32bit (693 MB)
If 10.10 64bit (695 MB)
Once download complete you will need to Burn the ISO as an “image” to a CD.
If unsure how to do this seek help elsewhere (it’s very simple)
You should now have a bootable trial Ubuntu CD
If your Internet is Wired you are set to continue if Internet is Wireless Router I recommend obtaining unrevoked because restart.
If Wireless
Go to Unrevoked Dot Com *I can't post links yet" and click “Download for Linux”
Save to Desktop
Once complete transfer “reflash.tar.gz” to USB Stick Drive
Remove Stick Drive
Insert Ubuntu into CD drive and close drive
Take steps needed to ensure Boot CD is activated upon restart
Once ready restart PC
CD should boot and “Welcome” screen displayed
Select “English”
Click “Try Ubuntu”
You should be brought to a “Desktop” containing two icons “Examples & Install Ubuntu 10.10”
If Wired
Click “Mozilla Icon” on the taskbar on the top of screen
Go to Unrevoked Dot Com and click “Download for Linux”
Open “Reflash.tar.gz” and Extract to Desktop
Close ALL open windows
Go to Applications>Accessories – Click “Terminal”
In the “Command Prompt Looking” Window type the following lines each follow by “Enter”
cd Desktop
chmod +x reflash
sudo ./reflash
Please Leave Terminal open
Unrevoked 3 should now be open
Connect USB Cable to Computer
With USB Cable connected
Connect Phone to USB (Yes you can now touch your Phone)
Unrevoked should recognize Phone and a “Prompt” should be displayed
Click “Ok/Yes” whatever it says I forgot I was so excited to not see another FAIL MSG
Sit Still DO NOT touch ANYTHING
Be patient phone will reboot multiple times
Should eventually see Phone Boot into the HBoot Menu
It will install clockworkmod
Phone will enter recovery menu
Unrevoked Window will hopefully eventually say something like
“Complete Safe to Disconnect and Reboot”
NOTE – Both my Terminal on Ubuntu & Recovery displayed multiple “Installation Aborted”, “Update Failed”, “ERROR”, and “Unsupported” lines in the log.
At this point you should be Successfully Rooted, and safe to reboot.
Superuser should be displayed in the app list
I’m not sure in what order I did what but I installed “Titanium Backup Free Edition” “Busy Box” and “Root Check” and played with each until Root Check displayed that I had both “Root Access and Busy Box Installed”
I do hope this works for you as it did for me. I refused to stay “unsupported by unrevoked” until a fix was available. I will try to help anyone with clarification in steps, or any questions/problems. I did find out that a version of Linux called “Slax” is available that has “root permissions” contained already. Which eliminates the entire “Terminal” step making it unneeded?
Click to expand...
Click to collapse
The reason that this worked for you was because you have previous used revoked and are now s-off. With s-off, you can reflash recovery and superuser without unrevoked being supported. Others will probably still have an issue.

ethahes said:
Guide to rooting Branded 2.2 Froyo Desire with 1.06 HBoot
My Software Information
Android Version - 2.2
Baseband Version - 2.15.00.11.16
Kernal Version - 2.6.32.21-g7a207a4 | [email protected] #1
Build Number - 2.11.573.5 CL325935 release-keys
Software Number - 2.11.573.5
Browser Version - Webkit 3.1
PRI Version - 1.70_027
PRL Version – 15106
My HBoot Information
Bravoc DVT2 SHIP S-OFF
HBOOT-1.06.0000
Microp-051e
Touch Panel-Synt0101
Radio-2.15.00.11.16
Dec 22 2010, 16:16:39
Info - I have a US Cellular Branded CDMA Desire. I have owned it for 3 months. Came with 2.1 Eclair, I was unhappy waiting for 2.2 so I rooted and flashed a couple different roms. I ended up with a Custom Froyo w/ Sense and a few Gingerbread features. I found out about update release for US Cellular so before updating I reset factory settings restoring phone to stock Eclair. Took phone to store, they upgraded to Froyo I played for a few days until I wanted to reroot my phone. Unsuccessful on at least 5 different tries with both Windows/Linux and many different options of unrevoked and settings. Found out that 1.06 HBoot was unsupported by unrevoked. So I studied what other people posted about their attempts and ideas. Found one person claiming to have rooted theirs. Unfortunately he did not give many details in his post about the exact process. Here are the steps I took to successfully root my phone.
Backup any data, media, programs you wish to your SD card.
Transfer your backup from your SD card to your PC.
Go to Settings>SD & Phone Storage
Click “Unmount SD Card”
Click “Format SD Card”
This will clear anything you may have saved to it, which might interfere with rooting/flashing
Once Formatting is complete
Click “Mount SD Card”
Now it is time to reset phone to stock 2.2
Go to Settings>SD & Phone Storage (You should already be there, unless you went back/home)
Click “Factory Data Reset”
Click “Reset Phone” in next menu
Phone should reset and reboot bringing you into a tutorial (US Cellular, unsure on other carriers)
Skip through all prompts
DO NOT edit/change/add anything
You should now be at the Home Screen
Go to Settings>Applications>Development - Enable (Green Check) “USB debugging”
Go to Settings>Applications - Enable (Green Check) “Unknown Sources”
Go to Settings>Connect to PC>Default Connection Type – Select (Green Circle) “Charge Only”
Go to Settings>Connect to PC – Disable (NO Green Check) “Ask Me”
Press Home Button
Put Phone Down
Leave Phone On (Do not power down) & Do Not Touch Phone until Told To
Your phone is ready to begin rooting.
You can attempt to use Windows if you really wish, but I find Linux to be a no-hassle idiot proof OS. Many people run across issues with either drivers, or sync, or possibly other factors.
Linux solves this issue by having an all-in-one OS. It already contains the drivers needed, and does not require installing or uninstalling of anything.
Evidently there’s a **** ton of options when it comes to Linux.
I used Ubuntu Desktop Edition 32-bit
I recommend using the same because my steps follow that.
Go to Ubuntu Dot Com *I can't post links yet"
Ensure Latest Version (10.10 when guide was made)
Ensure correct bit (32 or 64)
Click “Start Download”
If 10.10 32bit (693 MB)
If 10.10 64bit (695 MB)
Once download complete you will need to Burn the ISO as an “image” to a CD.
If unsure how to do this seek help elsewhere (it’s very simple)
You should now have a bootable trial Ubuntu CD
If your Internet is Wired you are set to continue if Internet is Wireless Router I recommend obtaining unrevoked because restart.
If Wireless
Go to Unrevoked Dot Com *I can't post links yet" and click “Download for Linux”
Save to Desktop
Once complete transfer “reflash.tar.gz” to USB Stick Drive
Remove Stick Drive
Insert Ubuntu into CD drive and close drive
Take steps needed to ensure Boot CD is activated upon restart
Once ready restart PC
CD should boot and “Welcome” screen displayed
Select “English”
Click “Try Ubuntu”
You should be brought to a “Desktop” containing two icons “Examples & Install Ubuntu 10.10”
If Wired
Click “Mozilla Icon” on the taskbar on the top of screen
Go to Unrevoked Dot Com and click “Download for Linux”
Open “Reflash.tar.gz” and Extract to Desktop
Close ALL open windows
Go to Applications>Accessories – Click “Terminal”
In the “Command Prompt Looking” Window type the following lines each follow by “Enter”
cd Desktop
chmod +x reflash
sudo ./reflash
Please Leave Terminal open
Unrevoked 3 should now be open
Connect USB Cable to Computer
With USB Cable connected
Connect Phone to USB (Yes you can now touch your Phone)
Unrevoked should recognize Phone and a “Prompt” should be displayed
Click “Ok/Yes” whatever it says I forgot I was so excited to not see another FAIL MSG
Sit Still DO NOT touch ANYTHING
Be patient phone will reboot multiple times
Should eventually see Phone Boot into the HBoot Menu
It will install clockworkmod
Phone will enter recovery menu
Unrevoked Window will hopefully eventually say something like
“Complete Safe to Disconnect and Reboot”
NOTE – Both my Terminal on Ubuntu & Recovery displayed multiple “Installation Aborted”, “Update Failed”, “ERROR”, and “Unsupported” lines in the log.
At this point you should be Successfully Rooted, and safe to reboot.
Superuser should be displayed in the app list
I’m not sure in what order I did what but I installed “Titanium Backup Free Edition” “Busy Box” and “Root Check” and played with each until Root Check displayed that I had both “Root Access and Busy Box Installed”
I do hope this works for you as it did for me. I refused to stay “unsupported by unrevoked” until a fix was available. I will try to help anyone with clarification in steps, or any questions/problems. I did find out that a version of Linux called “Slax” is available that has “root permissions” contained already. Which eliminates the entire “Terminal” step making it unneeded?
Click to expand...
Click to collapse
Does not work on USCC HTC Desire CDMA with HBOOT 1.06 that are S-ON.
We need a way for those of us USCC HTC Desire users who have Froyo as a stock ROM with HBOOT 1.06 S-ON to get that set to S-OFF. Currently no product to do so exists and while I was pointed to the #bravoc IRC channel by the users at #unrevokedtest, there wasn't anyone home. Though I have been reading at AndroidForums that someone named Matt is currently working on one. I'm not going to hold my breath at this point...

I think unrevoked is working on it. However, it could be awhile till a new exploit is found.
Sent from my HTC Desire CDMA using XDA Premium App

I was able to gain temporary root with z4root.1.3.0.apk
BravoC DVT2 S-ON
HBOOT-1.06.0000
RADIO-2.15.00.11.16
permanent root didn't work out with this app.

Glad I found this thread. Add me to the list. Ran UnrEVOked and no go. I get a "Failed to Unlock NAND" message. Hope the UnrEVOked guys come up with something.
BRAVOC DVT2 SHIP S-ON
HBOOT-1.06.0000
MICROP-051e
TOUCH PANEL-SYNT0101
RADIO-2.15.00.11.16

Stuck with STOCK Froyo 2.2 and HBOOT 1.06 + S-ON
Aaargh!!! This is so aggravating! I'm in the exact same position, guys. Need some help... Anybody...

I am as well, I use an EVO, but a lot of my friends are picking up Desires cause of a ZERO cost promo.
All ship 1.06
all have S-ON

Anyone with the 1.06 HBOOT should try out this exploit: http://forum.xda-developers.com/showthread.php?t=1044765
It says it may work on some Froyo builds and it is the first new exploit I've seen in awhile. I say give it a shot.
WARNING: CAN CAUSE SDCARD TO BE FORMATTED SO BACK UP FIRST AND READ ALL INSTRUCTIONS!
Post your results if you have any luck!

wont fix the s-on problem according to the first post, so even if you get root access it'll be removed once you reboot :/

grafton1046 said:
wont fix the s-on problem according to the first post, so even if you get root access it'll be removed once you reboot :/
Click to expand...
Click to collapse
It is possible to have permanent root access without s-off. The goal of getting root is so a custom recovery can be installed.

ah, so what can be done with root access when you can't access the system folder to make changes? Or am I missing something about the whole process...
Sent from my HTC Desire using XDA App

[HELP!] Velocity Cruz T301 Full Brick Recovery

Hi XDA,
so basically i bought a Velocity Cruz T301 recently and followed the known procedures for rooting, flashing ClockworkMod Recovery and custom rom (SJHill Rom v0.3).
before the full brick my device was at ClockworkMod 5 and rooted with SJHill Rom v0.3.
i installed CWM by flashing the zip in stock recovery, then succesfully rooted the device, finally wiped and flashed my custom rom
after major dissapointment in this tablets performance i decided i wanted to get rid of it.
So i downloaded the stock rom, wipe and flashed it onto the tablet...
the tablet turned off when it was finished (i think it was attempting to reboot) and never turned back on again...EVER! :good:
i cant even get to recovery
i tried flashing with adb and fastboot but the device is never even presents itselft to the computer.
i found out that you can boot the device into USB boot mode where you hold the "VOL -" (Volume Down) button and press the reset button and while connected to the computer (windows only) a "JZ4760 USB Boot Device" appears.
i did some googling and also found out that the T301 is based on similar tech to a bunch of tablets and they can all be modified by some software released by Ingenic called USBBootTool.exe
the tool is written in chinese and i cant decypher it all, though i found out how to use it based on its usage for other Ingenic based tablets
1.) you will need to disable driver signature verification (press F8 on boot of windows and toggle the setting, i hate rebooting too but it has to be done)
2.) boot your tablet into USB Boot Mode (hold down Vol - and press Reset button)
3.) install the driver for your device (included in the files below)
4.) with the tablet disconnected you would open the USBBootTool.exe
5.) select your tablet in the options and fill each box with the files needed to flash (files included below)
6.) reconnect the tablet while still in USB Boot Mode and the software will flash your device on detection
everything goes fine for me except when i get to the flashing part in the end.
when USBBootTool detects my tablet, it attempts to flash and gives me a stream of errors and never flashes my device.
i dont know what to do at this point. i have provided direct links to all the software im using and also links to where i got them.
any help would be appreciated, thank you to the XDA community in advance
>------------------- DOWNLOADS ------------------------<
USBBootTool.exe / Tablet Drivers (4725 / 4725B / 4740 / 4750 / 4755 / 4760 / 4770)
http://dl.dropbox.com/u/79196608/burn_tools_3.0.16.rar
obtained from - http://forum.xda-developers.com/showthread.php?t=1720621
Velocity Cruz T301 Update.zip (contains the system.img / data.img / mbr-xboot.bin files)
http://www.cruztablet.com/T301update.zip
obtained from - http://www.cruztablet.com/Article_861.php
SJHill Rom v0.3
http://www.androidfilehost.com/?fid=9390362690511176486
obtained from - http://www.slatedroid.com/topic/27583-rom-t301-sjhill-rom-17-feb-2012-download-link-updated/
ClockworkMod 5
http://files.androtab.info/ingenic/cwm/20120514/T301-recovery-signed.zip
obtained from - http://androtab.info/mips/ingenic/clockworkmod/

I have the same situation. I have gone through every menu in the USB Boot tool and to no avail am I able to recover my T100.

gmick is redoing the software because the coding is set up wrong. Once he gets that figured out there should be a fool proof unbricking method that we can follow. He is posting information over on Slate Droid if you want to take a look.

feyerbrand said:
gmick is redoing the software because the coding is set up wrong. Once he gets that figured out there should be a fool proof unbricking method that we can follow. He is posting information over on Slate Droid if you want to take a look.
Click to expand...
Click to collapse
ok post the link to the thread, and ill add it to the first post as a solution if its found to be a working one

JustSayTech said:
ok post the link to the thread, and ill add it to the first post as a solution if its found to be a working one
Click to expand...
Click to collapse
*Cross Post from SlateDroid* (but I can't post the link because XDA won't allow it)
I found out why the USB boot isn't working. Well, more appropriately I know where it fails but not exactly "why".
The USB Boot tool works like this:
1) Send x00 command (Get CPU Info)
2) Device responds with "JZ4760V1"
3) Host sends two binaries, stage1 and stage2. Stage 1 sets up memory stuff, and Stage 2 sets up USB flashing functions.
4) Host checks that the binaries executed by issuing another x00 command (Which serves as an "Are you still there?" function)
5) If the response is good, the host will flash the images, if the response is bad, it will abort.
Our devices are failing at step 4. The linux usb boot tools (xburst-tools) fail in an identical fashion.
I know that the first stage binary transfers and executes fine because if it didn't the device would be limited to 16k. The second stage is 120K and is transferred successfully. Once the second stage "execute" command is sent, the device crashes.
The second stage is also unique to the CPU type. I've used all of the binaries for JZ4760 I could find on the net and when that failed I cross compiled my own binary from source and it still crashed.
At this point I highly doubt I'll ever be able to fix it, and this completely explains why no one could get any usb recovery tool to work while others using similar devices could. I guess our board is modified just enough for ingenic's stock binaries to fail. Without knowing what's changed (getting Velocity Micro's source) we're SOL.
I can open it up again and solder on the serial header but I'm betting it's going to give me some generic "couldn't execute" message that isn't going to help me. I'll probably do this anyway though because I've come this far so what's the loss.

wow, i learned alot from that post, seems like writing a usbboottool-like application that can send the commands but also log and possibly bypass security checks etc but that def would take sometime. thank you for your insight, seems youve come the closest to cracking the case, actually you found the fault, hopefully your methods can eventually bring about a fix

JZ 4770
gmick said:
*Cross Post from SlateDroid* (but I can't post the link because XDA won't allow it)
I found out why the USB boot isn't working. Well, more appropriately I know where it fails but not exactly "why".
The USB Boot tool works like this:
1) Send x00 command (Get CPU Info)
2) Device responds with "JZ4760V1"
3) Host sends two binaries, stage1 and stage2. Stage 1 sets up memory stuff, and Stage 2 sets up USB flashing functions.
4) Host checks that the binaries executed by issuing another x00 command (Which serves as an "Are you still there?" function)
5) If the response is good, the host will flash the images, if the response is bad, it will abort.
Our devices are failing at step 4. The linux usb boot tools (xburst-tools) fail in an identical fashion.
I know that the first stage binary transfers and executes fine because if it didn't the device would be limited to 16k. The second stage is 120K and is transferred successfully. Once the second stage "execute" command is sent, the device crashes.
The second stage is also unique to the CPU type. I've used all of the binaries for JZ4760 I could find on the net and when that failed I cross compiled my own binary from source and it still crashed.
At this point I highly doubt I'll ever be able to fix it, and this completely explains why no one could get any usb recovery tool to work while others using similar devices could. I guess our board is modified just enough for ingenic's stock binaries to fail. Without knowing what's changed (getting Velocity Micro's source) we're SOL.
I can open it up again and solder on the serial header but I'm betting it's going to give me some generic "couldn't execute" message that isn't going to help me. I'll probably do this anyway though because I've come this far so what's the loss.
Click to expand...
Click to collapse
for my JZ4770 Earlier USB tool was flashing .img without any problem but for now it is saying "load cfg failed". "API downlaod failed' like dialogues and doesnt flash anything. Any idea? Thanks in advance!!

First restart your computer (actually restart it) then redownload the USB boot tool and save it in a completely new directory and use a different USB port
Sent from my Pokeball

Yes, I did
JustSayTech said:
First restart your computer (actually restart it) then redownload the USB boot tool and save it in a completely new directory and use a different USB port
Sent from my Pokeball
Click to expand...
Click to collapse
Yes, I tried with this suggestion. Rather I reinstalled xp and the tried again. But the dialogues are same. The history is like this. Was having ICS on JZ 4770. Formatted with usb tool and put JB updates. It was not sensing touch so reflashed another JB updates. Now the tab boots, it reaches to boot logo for around 12 seconds and restarts in stock recovery. While it is in booting stage it get detected by windows and adb also. In stock recovery mode it get detected by windows and in turn by adb also. If I tried to install updates through SD card it shows it had installed and reboots after completion. But again the same way it goes to boot logo and then back to stock JB recovery. It also boots in ingenic boot device mode and gets detected by USB burn tools. But when try to flash any of the ROM it gives the same dialogues "check cfg failed" "api download failed" "boot. fw failed" and cant flash anything.
Is there any tool which can be flashed or a script which can be used from SD card for completely formatting flash memory so that USB burn tool can flash required ROM?

can you flash the stock rom in recovery?

Managed using USB BOOT TOOL for ingenic JZ 4770 board in English
JustSayTech said:
can you flash the stock rom in recovery?
Click to expand...
Click to collapse
thanks man but I managed to boot the device. I used following USB BOOT TOOL for ingenic 4770 boards. The goodness with this tool, this is completely in English. You will know what you are doing. Even after opening the main window of the tool you can right click and then get another options(yes again in English). My problem with this device was bad blocks at 1024. In the options there is chance to force erase whole the nand partitions which I used and erased all the partitions thereby made all the partions available for flashing and readable by the tool. Then from File option selected stock rom files and flashed them. While flashing selected JZ4770 iNanad.ini file in manual configuration. This tool has really helped me to come out of the issue and will be useful for guys using JZ 4770 board.
http://www.4shared.com/rar/m1BUV5r2/USBBurnTool_20120401_for_relea.html

Got USBBootTool.exe kind of working.
1. Download the following file from Ingenic.
ftp * ingenic * cn/3sw/01linux/tmp/jz4770-20110610.rar
2. Download Applocale from Microsoft.
www * microsoft * com/en-us/download/details.aspx?id=13209
3. Extract the jz4770-20110610.rar and find the folder. (Using 7zip should keep the UTF encoding in Chinese)
20110610\04burn\20110524_4770_Programmer
4. Copy the folder 20110524_4770_Programmer to location you want to use it in.
5. Install Microsoft Applocale (Just in case, I don't think it is required)
Now Start Applocale and create a shortcut to USBbootTool.exe inside 20110524_4770_Programmer
中文(简体) is simplified Chinese option and should let you view the GUI correctly.
6. Now with the Applocale Shortcut created for USBbootTool.exe you can start the application with correct fonts.
Now this is where is breaks down.
TABLET-8 NAND FINAL BSP(S3 TEST) will allow you to read from it and write to it, but the CFG is off.
\tool_cfg\tablet-8-nand-final.ini is the configuration for it.
DO NOT CONNECT THE DEVICE WITH ANY OPTIONS CHECKED OR LOAD ANY FILES.
See Attached Images.
Next to the Read button is some Boot Option menu. I am not fulling aware of what this does.
What I need is a someone to help me fix/correct the ini/cfg files in
\20110524_4770_Programmer\tool_cfg\.ini
\20110524_4770_Programmer\4760\
to correctly match the files of the NAND.
Also if anyone has a copy (dd to img) or (cat to img) of the block devices.
That would help a ton.
# cat /proc/partitions
# cat /proc/mtd
I would also love another T10x Tablet for cheap.
I want to start building things like new bootloader, kernel, system image,
performance libraries to take full use of the Ingenic JZ4760 (www * ingenic * cn/product.aspx?CID=11)
I also bring Christmas gifts
2 APKS. You can place them in /system/app or /data/app.
Google Play will crash now and again, but it will load and work. (Vending.apk)
Secondly I bring the gift of performance increase, just by a slight bit.
edit the line of the heapsize in /system/build.prop dalvik.vm.heapsize=96m
Remember to make sure the permissions are set back to 666 or 644.
Original Vending.Apk before updates came from here: (Incase you are paranoid)
code * google * com/p/ics-nexus-s-4g/source/browse/trunk/system/app/Vending.apk?spec=svn20&r=18
ics-nexus-s-4g * googlecode * com/svn-history/r18/trunk/system/app/Vending.apk
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for
Click to expand...
Click to collapse
Stupid. how do you expect real people to help post Tech Docs? That is bad Moderating and Administrating.
Make sure to replace the Asterisk's with spaces to normal dots.

Requesting Block Images.
Does anyone have a copy of it they can send me for a T10x?

block images......
IceGryphon said:
Does anyone have a copy of it they can send me for a T10x?
Click to expand...
Click to collapse
Which block images do you want?
...also is there a way to rip the stock images off the jz4760 in the t301.
Such as:
Can i usethe ingenic uboot tool?
Anybody find the jtag pins?
Is the 4 pin conn next 2 the batt for serial?
.......i guess ill try to take a look this weekend
Ics would be really nice, but probably slower than stock..... especially with the limited ram
I unpacked the stock rom. I also unpacked an ics rom for a jz4770, and repo sync'd the aosp and mips 3.0.8 android kernel.
I'm still trying to figure out specs for the processor though. I know that its mips32 - el- fp- r1, but i cannot figur out the dsp version ... if it has one?

Error in erasing nand
nanachitang420 said:
thanks man but I managed to boot the device. I used following USB BOOT TOOL for ingenic 4770 boards. The goodness with this tool, this is completely in English. You will know what you are doing. Even after opening the main window of the tool you can right click and then get another options(yes again in English). My problem with this device was bad blocks at 1024. In the options there is chance to force erase whole the nand partitions which I used and erased all the partitions thereby made all the partions available for flashing and readable by the tool. Then from File option selected stock rom files and flashed them. While flashing selected JZ4770 iNanad.ini file in manual configuration. This tool has really helped me to come out of the issue and will be useful for guys using JZ 4770 board.
http://www.4shared.com/rar/m1BUV5r2/USBBurnTool_20120401_for_relea.html
Click to expand...
Click to collapse
I used english ingenic tool to erase bad blocks but m nt able erase bad blocks live suit is giving eror id=0x4848

[Galaxy Note2 TOOLKIT V6 GSM] Drivers, Backup, Root, Recovery, Flash Stock Image

[TOOLKIT] UNIFIED ANDROID TOOLKIT - SAMSUNG GALAXY NOTE 2 - Drivers, Root, Recovery + MORE
GSM (GT-N7100) and LTE (GT-N7105) SUPPORTED. THREAD: http://forum.xda-developers.com/showthread.php?t=1923956
AUSTRALIAN GSM (GT-N7100T) and LTE (GT-N7105T) SUPPORTED. USE GSM THREAD
SPRINT (SPH-L900) SUPPORTED. THREAD: http://forum.xda-developers.com/showthread.php?t=1957155
TMOBILE (SGH-T889) SUPPORTED. THREAD: http://forum.xda-developers.com/showthread.php?t=1957720
MOBILICITY, VIDEOTRON, WIND [SGH-T889V] SUPPORTED. NO THREAD YET. USE TMOBILE THREAD
AT&T (SGH-L317) SUPPORTED. THREAD: http://forum.xda-developers.com/showthread.php?t=2052779
BELL, ROGERS, SASKTEL, TELUS [SGH-I317M] SUPPORTED. NO THREAD YET. USE AT&T THREAD
VERIZON ([SCH-I605]) SUPPORTED. THREAD: http://forum.xda-developers.com/showthread.php?t=2052788
US CELLULAR (SCH-R950) SUPPORTED. NO THREAD YET. USE ANY
KOREAN SK TELECOM [SHV-E250S] SUPPORTED. NO THREAD YET. USE ANY
The Unified Android Toolkit brings together all the Nexus and Samsung Toolkits and supports many Nexus and Samsung devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT
* Install correct adb/fastboot drivers automatically on Windows xp/vista/7/8 32bit+64bit/Windows 10
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your data from selectable folders [internal or external storage] to your PC for a Full Safe backup of data
* Unlock/Re-Lock your Bootloader [Nexus]
* Root Stock builds
* Various Root options using insecure boot image or custom recovery
* ALLINONE to Unlock, Root, Rename the Restore Files and install busybox [Nexus]
* ALLINONE to flash custom Recovery Root, Rename the Restore Files and install busybox [Samsung]
* [NEW] use SkipRoot boot image to Auto Root device, install Busybox Binaries and rename Recovery Restore files [selected devices]
* Install BusyBox on your device
* Perform a FULL NANDROID Backup of your system (Boot, Cache, Data, Recovery and System) via adb and save in Custom Recovery format on your PC which can be Restored via CWM Recovery [if insecure boot image available]
* Fix extSdCard write permissions from installed apps in Android 4.4+ [Samsung]
* Pull /data and /system folders, compress to a .tar file and save to your PC [if insecure boot image available]
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC [if insecure boot image available]
* Extras, Tips and Tricks section
* Auto Update ToolKit to latest available version at startup (professional only feature)
* Program up to 10 Quickpick slots and run them very quickly (professional only feature)
* Mods section to automatically perform certain tasks on your device
* Download Google Stock Image directly to correct ToolKit folder for extracting and flashing [Nexus]
* Check md5 of stock image to make sure downloaded file isn’t corrupted before flashing [Nexus]
* Download Samsung Stock Firmware to PC for extracting and flashing via Odin [Samsung]
* Flash Custom Recovery or Google Stock Image to Device
* Flash any part of a stock Nexus image to device [boot, system, recovery] – Great for fixing broken parts of firmware
* Rename the Recovery Restore File present on some Stock Roms
* Boot into CWM Touch, TWRP, Philz Touch Recovery or Stock Recovery without Flashing it [Nexus]
* Flash Custom Recovery to Device
* Boot [Nexus] or Flash .img Files directly from your PC
* Install a single apk or multiple apk’s to your device
* Push Files from your PC to your device
* Pull Files from your device to your PC
* Disable forced encryption on Nexus6 and Nexus9 devices
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps [calls log, sms, contacts]
* Install EFS/Partition Backup/Restore app by Wanam
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Set Files Permissions on your device
* Open new Command Prompt for manual input
* Reboot device to Fastboot Mode or Android from fastboot mode [Nexus]
* Reboot device to Fastboot Mode [Nexus], Recovery, Android or Download Mode [Samsung] from adb mode
* Display Important Information about your device
--------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------
SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some ‘may’ get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.
Credits: ChainsDD for Superuser, Chainfire for SuperSU and kernel patches, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, NextApp for the SD Fix app, fOmey for TWRP for the Galaxy Gear.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR ‘AUTO UPDATES’ DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE ‘QUICK PICKS’ SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE “ANY BUILD” OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).
MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW.
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
How to get into Recovery Mode
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
How to get into Download Mode (For Odin)
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.

**FAQ**
Q. What is ADB Shell?
Adb shell is a linux command line tool (because android is based on linux) used to send commands to your android device. For S-ON devices, this is crucial for modifying files in the /system partition (where the rom sits) as you cannot modify anything in /system when the rom is running without S-OFF (e.g removing system apps).
From Google:
Android Debug Bridge (adb) is a versatile tool lets you manage the state of an emulator instance or Android-powered device. It is a client-server program that includes three components:
A client, which runs on your development machine. You can invoke a client from a shell by issuing an adb command. Other Android tools such as the ADT plugin and DDMS also create adb clients.
A server, which runs as a background process on your development machine. The server manages communication between the client and the adb daemon running on an emulator or device.
A daemon, which runs as a background process on each emulator or device instance.
----------------------------------------------------------------------------
Q. I flashed CWM but each time I reboot the Stock Recovery is back
There is an auto recovery restore system on Android that will reflash the Stock Recovery if you flash CWM on a Stock Rom.
Use Root Explorer to Mount the system folder as R/W (or use a free app from the Market). Delete the file recovery-from-boot.p from /system. Now when you flash CWM Recovery it will NOT be overwritten after a reboot. You can also use the Toolkit to rename the files if you wish.
----------------------------------------------------------------------------
Q. What is the difference between Nandroid and Titanium backup?
A NANDROID will backup the whole system including boot, system, data and recovery partitions so you can restore a complete rom and all data and settings.
Essentially Titanium Backup is used to backup apps and associated user data. These could be restored AFTER a full wipe and a new Rom had been flashed on your phone.
The other option now which google added into the new adb command list is the adb backup which is in the ToolKit and can do the same job as Titanium Backup but will store the data on your PC rather than on the phone (where it takes up space and could be deleted).
----------------------------------------------------------------------------
Q. When would i perform a nandroid vs a titanium backup?
You would perform a nandroid backup to back up your entire system including boot image and data and system partitions so you can restore your entire system back to that particular point in the future.
You would use Titanium Backup mainly to back up your installed apps and settings so they could be reinstalled easily and quickly on any future roms. You can also choose individual apps to backup or restore on Titanium Backup whereas if you restore your boot partition via CWM Recovery you are stuck with the whole lot.
----------------------------------------------------------------------------
Q. When I try to open the ToolKit I get a box pop up for a split second and then it goes away. My AntiVirus program says the file may be harmful.
The exe files I compiled are not digitally signed with a Microsoft certificate (as they cost money) so certain AntiVirus programs (mainly Norton and AVG Free) will pick it up as potentially harmful when it is not. They pick up ANY file that doesnt contain a purchased Microsoft certificate in the same way. Restore the deleted file and exclude it from further scans and it will be fine.
----------------------------------------------------------------------------
Q. I donated but where do I get my activation code from?
Donation Codes are sent out manually to your PayPal email address [unless otherwise stated] after a confirmation email from PayPal has been receive. The Code can then be entered in the ToolKit Settings, Activate Donators Features Screen. This will enable The Auto Updates, Quick Picks and Extras Features in the ToolKit. Please be patient when waiting for the Code to be sent as it depends very much on what I am doing and whether I am at my PC when the donation is made. Please do not post in the ToolKit's thread or pm me asking for the activation code as it clogs up the thread and my messages. If you haven't received your code after 24 hours then feel free to email me via the skipsoft.net contact page.
Don't worry that you have been forgotten about, I check all emails personally and will deal with it as soon as I can.
----------------------------------------------------------------------------
Q. I have Windows 8 and cannot install the drivers
How to Disable Driver Signature Enforcement in Windows 8:
From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the pop-out bar to appear, then click the Gear icon).
Click ‘More PC Settings’.
Click ‘General’.
Scroll down, and click ‘Restart now’ under ‘Advanced startup’.
Wait a bit.
Click ‘Troubleshoot’.
Click ‘Advanced Options’
Click ‘Windows Startup Settings’
Click Restart.
When your computer restarts, select ‘Disable driver signature enforcement‘ from the list. You can now load your modified driver. Reboot again once the driver is installed and all will be well.
----------------------------------------------------------------------------
Q. I flashed the Stock Firmware Image. Odin flashes the file successfully and the phone reboots but it stays stuck on the samsung logo
If the firmware tar file does not include a userdata image (which most Samsung firmware do not) then your userdata partition will be left from your previous setup. If this is incompatible with the new firmware because of build or something else then your system will freeze on boot up.
This is easily fixable by holding the Volume UP, Home and Power buttons all at the same time for about 10 seconds until the device reboots to the Stock Recovery screen. Use the Volume Down button to scroll down to 'wipe data/factory reset' and press the Home button to select it. Go down to yes to confirm and your userdata partition will be wiped. Your device should now boot fine.

*reserved if needed*

How To Videos on the Samsung Galaxy Note II ToolKit
This post belongs to wwjoshdew I am just mirroring his posts from the other Note2 threads.
Reserved for how to videos on this incredible toolkit!
http://www.youtube.com/playlist?list=PLwCVKEYxr_z7FBQYT32dbYw_kdSJmSDH2
How To Root
How To Manually Boot to Custom (or Stock) Recovery

mskips magic
Another one in the series of TOOLKITS from Mskip ( here since the early xdays ) and im v-happy to see this here.
im already rooted but this will make root a safer process for so many Note-2 owners.
here we go

Appreciate your big work Mskip !!!
This is a wonderful and complete tool

Mskip, the legend! !!!!!
Sent from my GT-N7100 using Tapatalk 2

Great news. Thank you so much for this. I'm sure it will come in very handy :good:

Released!!
Download link in first post.
Please let me know of any errors or bugs so I can get them fixed ASAP.
Mark.

hi mskip
Thanks for this great tool, i was using it on my GS3 to and was very useful.
I have a little issue I'm not able to flash the "boot-insecure-xxalj1-n7100.tar" after i hit start it doesn't goes on, i waited more than 15 min and nothing, see attached picture:
Any advise?

Can this be used for Note 2 LTE?
Sent from my GT-N7000 using Tapatalk 2

M3xital said:
hi mskip
Thanks for this great tool, i was using it on my GS3 to and was very useful.
I have a little issue I'm not able to flash the "boot-insecure-xxalj1-n7100.tar" after i hit start it doesn't goes on, i waited more than 15 min and nothing, see attached picture:
Any advise?
Click to expand...
Click to collapse
Its a driver problem with Odin.
Try rebooting your phone and pc and use a different usb port. I had that problem in the past and it usually fixed it. Also make sure you dont have samsung kies on your pc as Odin doesnt play nicely with it at all.
Mark.

zard said:
Can this be used for Note 2 LTE?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
As far as I know the gsm and lte lodels are exactly the same hardware so in theory it should work fine. The only difference would be radios. This is what im hoping so I can keep everything under a single Toolkit. Do you have a link to a Note 2 LTE forum so I can check it?
Mark.

I've used these mskip all in one tools for various Android devices and can thoroughly recommend them. Whilst I have already rooted and modded my 7100 I will be downloading this tool and buying him yet another beer!
Sent from my GT-N7100 using Tapatalk 2

mskip said:
Its a driver problem with Odin.
Try rebooting your phone and pc and use a different usb port. I had that problem in the past and it usually fixed it. Also make sure you dont have samsung kies on your pc as Odin doesnt play nicely with it at all.
Mark.
Click to expand...
Click to collapse
Gonna try to reboot phone and PC and try another USB port. Don't have Kies installed. Will let you know.

hey
Is it a chance for mac version ?
Cheers
P

mskip said:
As far as I know the gsm and lte lodels are exactly the same hardware so in theory it should work fine. The only difference would be radios. This is what im hoping so I can keep everything under a single Toolkit. Do you have a link to a Note 2 LTE forum so I can check it?
Mark.
Click to expand...
Click to collapse
Thanks Mark! That did the trick.
Just another question, after making a Nandroid backup I end up (on my PC) with a 16 mb folder like on a incremental backup but without the blobs folder.

Don't know why not able to download from MediaFire.
Try to get it later again. Thanks anyway.

Ive used it, works like a charm!!!! Thanks so much mate, i wil be making a donation tomorrow.
Sent from my GT-N7100 using Tapatalk 2

mskip said:
As far as I know the gsm and lte lodels are exactly the same hardware so in theory it should work fine. The only difference would be radios. This is what im hoping so I can keep everything under a single Toolkit. Do you have a link to a Note 2 LTE forum so I can check it?
Mark.
Click to expand...
Click to collapse
Sorry, no links as yet. I'm waiting for the Note 2 LTE to launch here (that's the only model to be launched here) this month, thus I had started to read Note 2 threads to get myself ready. I'll pm you if I find any link useful. So far, from the threads in Xda Note 2, there's no good information on LTE.
Sent from my GT-N7000 using Tapatalk 2

Guide for noobie

Hi,
I'm currently waiting for buy the Xperia XZ. I check some of XDA's thread and with Sony's smartphone I'm still afraid. So I want to know if there is a thread gathering all the detailled step to root, install TWRP, flash latest firmware, install custom ROM etc... ?
Thanks a lot

[Guide] Here is the DHGE guide for rooting SONY devices 2019-04
Changelog at the bottom of this post.
nathan30 said:
if there is a thread gathering all the detailed step to root, install TWRP, flash latest firmware, install custom ROM etc... ?
Click to expand...
Click to collapse
No - but you can find all you need to know here in this forum or in the devices-fora later than Z3+ or SONY-cross-device.
https://forum.xda-developers.com/crossdevice-dev/sony
Good introductory (written for devices before Z3+):
https://forum.xda-developers.com/crossdevice-dev/sony/noob-guide-to-sony-ericsson-xperia-t3209012
It is still valid but the 2015 and newer devices are not rootable anymore as described thanks to DM-Verity.
For rooting the current device you have to open the bootloader.
Any claims to the contrary found "on the web" are only tricks to have you install "interesting" software on a Windows PC.
Do you want root?
A classic post to help you decide
No:
wait for the OTA-updates from SONY (over the air - prosaic?)
don't like waiting or want to downgrade: get Flashtool http://www.flashtool.net
it comes with Xperifirm that finds you the latest ROM
https://forum.xda-developers.com/cr...xperifirm-xperia-firmware-downloader-t2834142
Unfortunately Xperifirm only finds the latest ROM (the only available on SONYs servers) so you better keep your downloads (>2 GBytes each) or find an older ROM in case you need it (xda has a search function). Here you'll find some ROM-versions: https://xpericheck.com
since my Xperia XZ/XZ1 I occasionally have problems with Flashtool that it requires a FSC-script which does not come with it or can not easily be copied from a similar device.
Now I use Newflasher https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426 by @munjeni. This is a command line tool that for me unfortunately only works under Windows (have JDK issues under Debian).
You unpack the ROM (ftf-file) and place the newflasher.exe in the directory where you unpacked to. Then you start the device in flash mode (power on while holding the volume down key) and run the tool from the command line as administrator/root.
If you do not delete userdata.sin you will initiate the equivalent of a factory reset (aka loose all your data and settings!). For an upgrade within the same Andoid version I always delete userdata.sin before newflashing.
Yes:
As stated above, you need to unlock the bootloader to modify the system software on your device. Fortunately SONY gives (for non-carrier-locked) devices the option to unlock the bootloader.
Check if unlocking is allowed: in the service menu (dial *#*#7378423#*#* or *#*#SERVICE#*#* ) check under "Service Info"->"Configuration" the line "Bootloader unlock allowed:"
If you read anything other than "Yes" Stop here!
No: flashing another SONY Rom ("Customized CountryX") does not help you.
Hint: there is an app "SONY service menu" in the app-repository (F-Droid or Google).
OK - you can Now it is your last chance to save your device keys or "backup the trim area partition"
You should do this if you ever want to return to a SONY "blessed" state. e.g claiming service in countries where warranty is not for devices with unlocked bootloader or you want to sell it.
There are some device specific kernels out there whose authors state that they mitigate all DRM issues once the TA is restored. I guess you need these kernels otherwise restoring the TA locks up your device ...
Otherwise do not bother with restoring the TA-partition. Doing so after the next steps will soft brick your device.
Now you have to prepare your PC with some drivers in order to start the backup process:
Go to SONY's developver world http://developer.sonymobile.com
Under "Downloads" you will find the drivers for the XZ or any other device http://developer.sonymobile.com/downloads/drivers/xperia-xz/
These drivers are for Windows, do not bother if you are running a free operating system.
To get fastboot running you might additionally have to find the "fastboot_driver" in the download area. Put the content of the ZIP-file into the directory where you you unzipped the device driver and install it via right-clicking on the file android_winusb.inf.
Install these drivers if you are a Windows user. Under Windows 8 and newer there could be problems with installing "non signed" drivers.
Do a web/xda search to circumvent this security measure of Microsoft or do click on reboot while holding the shift-key and figure it out yourself.
http://www.flashtool.net/win8drivers.php
When you are installing: You also need to install the programs adb and fastboot.
https://forum.xda-developers.com/showthread.php?t=2317790
If you are running a free operating system: search for adb/fastboot or Android SDK in your repository and install these.
Running Linux it helps to insert the udev-rule mentioned in http://www.flashtool.net/lininstall.php otherwise you have to run esp. fastboot with root-privileges (not recommended, although the udev rule saves no punches ...)
On Android on your SONY device you have to be root to save a partition - catch 22 :crying: ...
https://en.wikipedia.org/wiki/Catch-22
Don't fear the ... / catch: For Android Marshmallow ROMs, e.g. up to version 39.0.A.3.30 of the Xperia XZ ROM, exists an exploit of the copy on write function in the Linux kernel that gets you root privileges temporarily.
On newer devices where there is no Marshmallow ROM with a vulnerable kernel available you are out of luck until another exploit is found.
Follow https://forum.xda-developers.com/crossdevice-dev/sony/universal-dirtycow-based-ta-backup-t3514236
Hint: In post #21 is described how to restore the TA (read the last sentence! -> you have to flash a stock ROM after restore).
If it does not work the first time let the tarnished bovine do its stride several times more.
Or: Repeat the process until success.
If you are already on Nougat you must downgrade the system ROM (see above) to use the exploit and backup the TA-partition.
The latest exploit that is available for devices that came out with Oreo uses a different exploit.
Search for this exploit in the specific forum or on "Sony Cross Device". If you are already on Pie you have to download an Oreo ROM for your device.
This is similar to the procedure described above that has the Xperia XZ in mind.
TA-partiton backed up?
Now the non-reversible part:
Under http://developer.sonymobile.com/unlockbootloader/ you request an unlock code.
READ, READ what SONY have written there!
- You will lose some DRM functionality: https://forum.xda-developers.com/z3-compact/general/loss-drm-keys-t2890936
- Your device will factory reset. You have a backup?
You can get the IMEI-number from the original package of your phone (if you have good eye sight and nobody swapped the boxes) or pull a tab from the side of the phone (you do not want to do that) or print a screen shot of the relevant page of your service menu or head into settings->about device->status->IMEI-Info.
You follow SONY's instructions to unlock the bootloader and hold your breath as after a long reboot everything on your device is wiped. On the newer devices you get an ugly warning "the device can't be trusted anymore".
NEVER EVER enable the MyXperia software from now on!
On some devices this in combination with an unlocked bootloader will hard brick your device.
Here was a link to fxpblog where they destroyed two devices.
Hey, you have been warned. With the TA-backup you always can return to the chicken den.
Become a "developer"
- Tap seven times on the build number of your device. (settings->device info)
- then enable "OEM unlocking" (new for the 2016 and later devices like XZ) and "USB-debugging"
You have read the SONY advice?
Next decision: Root stock ROM or go Custom Rom?
I am VERY happy with LineageOS on a Tablet Z and other devices in my household. I liked the Resurrection Remix ROM on my SAMSUNG phone.
Your mileage may vary: Testing a ROM and reversing will cost you with a proper backup minimum 4-5 hours.
If you choose a custom ROM:
- read the thread to get a hunch if you really want to install it (get over the off topic noob questions and annoying full quotes)
- Follow the instructions of the first page of the ROM-thread to install it. If you can not do this: stop or be prepared for searching and learning.
From February 2017 until May 2017 I had eXistenZ N on my Xperia XZ and like the UI tuning modifications. This "ROM" does not come pre-rooted it is a patch for the stock ROM (match the versions exactly!) that enhances the settings/look.
On SONY devices I recommend rooting stock ROMs.
Shortcut: Pie users can proceed to step 7 here
Having a custom kernel might still be advantageous for you.
You need a custom (or modified stock) kernel (aka boot image) with DM-Verity and SONY-RIC OFF.
This kernel has to be in sync with your ROM. Flashing an unsuitable kernel (e.g. MM-kernel on N-Roms) will result in a boot loop aka "soft brick".
You even can bake one yourself (no easy task) if you find/adapt the sources for your device. -> first stop SONY developer world
This is might be easy! THANKS to the efforts of @AndroPlus, @janjan and others.
You have to look into the device specific fora to find a proper kernel for your ROM-version.
They have also included many patches to improve battery life, mitigate some (e.g. camera) issues from the loss of the device keys ...
Download the kernel and recovery for your device and ROM-version and follow the kernel makers' instructions.
On devices where there is no custom kernel, you can try patching the stock kernel to switch off RIC and DM-verity. In reality behind the scenes it is a bit more than just patching (=modifying) the kernel. You also get some updated init-scripts and as a end result a new boot.img
Very useful is [PoC][Work in progress] Trim Area Proof Of Concept developed by @munjeni
These scripts not only prepare a stock kernel for rooting but also put your TA backup from above to such a use that you regain the DRM-features lost by opening the bootloader! So you do not need a custom kernel with partial DRM-fixes!
For Oreo it is more complicated (it might be easier to search for a suitable boot.img aka kernel and I have not tested it on Pie but see next step):
@serajr enhanced a script specifically for Xperia X Performance, XZ and XZs
https://forum.xda-developers.com/showpost.php?p=74724162&postcount=2793
Under Linux I had to set the executable attributes on the shell scripts and binaries (chmod +x).
You get the required kernel.elf via the tools menu in Flashtool. Dump "kernel.sin".
I started applying the scripts to the Stock ROM in May 2017 since eXistenZ ROM lagged a bit behind in security patches and Android version:
- flashed stock ROM via Flashtool or Newflasher
- prepared a patched boot image with PoC and my kernel...sin and TA.img and answered all questions with "yes" (hit return each time)
Code:
./ta_poc kernel.sin TA.img ramdisk
I am on Debian as operating system.
On Windows you just run the provided batch files and follow the instructions here and in the thread for the scripts.
- flashed the resulting boot image with fastboot flash boot boot.img and test it works. Service menu/Security: keys provided YEAH
- flash recovery and from there root with SuperSU and flash Titanium Backup
- restored my apps with their data via Titanium Backup
==============
Some hints:
==============
Most of these commands emit useful info on the command line - read it, post their error messages if you are stuck.
Version numbers of the software used speeds diagnosis of problems. Often a good advice: "Use latest version."
adb reboot bootloader or switching OFF the device and then pressing the "volume up" button while plugging the USB cable gets you into fastboot mode. You see a black screen and the blue LED light.
I normally do not flash the kernel-ZIP-file via recovery but unpack it and flash this: fastboot flash boot boot.img
To get into recovery mode:
Switch OFF your device. Press the "power" button shortly to switch ON and hold "volume down" button more than 5 seconds (or when you see the yellow LED light on some devices).
Or: adb reboot recovery
If you can not get into recovery (e.g. AndroPlus has no kernel for your latest SONY ROM):
fastboot boot TWRP_latest_version.img
I use an SD card (content there survives factory resets) and there a directory "for_recovery" well stocked with the zip-files I intend to flash. In TWRP you can tell the file manager on what storage (internal, SD-card, USB ...) it will find the flashable ZIP-files. The default is "internal".
Pressing the Power button and "volume up" for about five seconds gives you a hard reset.
Good if you are totally struck - just flash a SONY ROM for your device with Flashtool and all the wipe boxes checked or use Newflasher (overwrites most partitions including your data).
If you like to read about the haarrrdddd way:
https://forum.xda-developers.com/z4-tablet/help/enybody-root-t3154926
The first rooting of a DM-Verity secured device in 2015. Thanks to SONY for releasing source code and binaries.
Rooting - aaahh, finally
Flash the latest Magisk (up to late 2017 I used SuperSU which still works) from recovery.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
https://www.chainfire.eu/ Find the latest SuperSU from there. You will not find it there any more since Chainfire has sold the rights to the utility. I endorse Magisk since that is open sourced on GitHub.
No: flashing a custom kernel and recovery does not root your device.
For Android Pie users: On my Xperia XZ1 I can skip step 6 completely!
Just install/upgrade to the latest Pie ROM and flash Magisk and install the Magisk app.
Bonus: Debloat the device
https://forum.xda-developers.com/search/forum/2522?query=debloat
Nowadays I use a debloat script written by @serajr for my devices https://forum.xda-developers.com/xperia-xz2/development/oreo-debloat-script-v1-0-t3798979,.
I edit (comment out) the debloat_list.sh in order to keep "com.google.android.apps.maps" and "com.sonymobile.email" which I both use.
mine (you screened my script?):
flash the attached ZIP-file
View attachment xtrm_debloat.flashable_ew_2016-12.zip
found in https://forum.xda-developers.com/xperia-z5/general/discussion-bloat-sony-xperia-z5-t3518860 probably original work by @ganeshbiyer
=============================================================
With opened bootloader you will not get OTA updates any more!
You have to check with the Xperifirm program if there are newer ROMs for your device.
I have not had any problems with installing e.g. a Swiss ROM over a Central Europe. There could be some worries when switching continents.
Download the desired ROM via Xperifirm and follow the instructions of Flashtool to flash the device (over USB update = OUU :laugh.
Accept the use of the FSC script.
Repeat the steps 5 to 6(7) for any other/newer SONY ROMs you flash followed by step 4 (if necessary).
If a wipe is needed I prefer the full wipe in TWRP compared to checking the boxes in Flashtool.
Or use Newflasher without flashing userdata.sin (just delete the file) in case of an upgrade.
=============================================================
CHANGES to this Guide
2019-04-23 updated for Pie, endorsed Newflasher, added link to serjars debloat script, link ckecks
2018-02-28 clarified getting kernel.elf for self patching, some typos, link ckecks
2018-01-31 link for better suited ta_poc added, toned down AndroPlus endorsement, added Magisk
2017-06-25 added link to xpericheck (find older ROMs), added hint for restoring TA for those TLDR-guys
2017-06-02 added procedure for patching stock kernel as alternative to custom kernels
2017-02-05 added recommendation for eXistenZ N ROM
2017-01-25 new URL for SuperSU, typos
2017-01-18 corrected the advice for booting into TWRP
2017-01-17 added info on fastboot driver for Windows users

DHGE said:
No - but you can find anything here or in the devices-fora later than Z3+ or SONY-cross-device.
https://forum.xda-developers.com/crossdevice-dev/sony
Good introductory (written for devices before Z3+):
https://forum.xda-developers.com/crossdevice-dev/sony/noob-guide-to-sony-ericsson-xperia-t3209012
It is still valid but the 2015 and newer devices are not rootable anymore (as described) thanks to DM-Verity.
For rooting the current device you have to open the bootloader.
Any claims to the contrary found "on the web" are only tricks to have you install "interesting" software on a Windows PC.
Do you want root?
No:
wait for the OTA-updates from SONY
don't like waiting or want to downgrade: get flashtool http://www.flashtool.net
it comes with Xperifirm (at least for my linux machines) that finds you the latest ROM
https://forum.xda-developers.com/cr...xperifirm-xperia-firmware-downloader-t2834142
Unfortunately it does not find many older ROMs anymore so you better keep your downloads (>2 GBytes each) or find an older ROM in case you need it (xda has a search function).
Yes:
As stated above, you need to unlock the bootloader to modify the system software on your device. Fortunately SONY gives (for non-carrier-locked) devices the option to unlock the bootloader.
Check if unlocking is allowed: in the service menu (dial *#*#7378423#*#* or *#*#SERVICE#*#* ) check under "Service Info"->"Configuration" the line "Bootloader unlock allowed:"
If you read anything other than "Yes" Stop here!
No: flashing another SONY Rom ("Customized CountryX") does not help you.
Hint: there is an app "SONY service menu" in the app-repository (F-Droid or Google).
OK - you can Now it is your last chance to save your device keys or "backup the trim area partition"
You should do this if you ever want to return to a SONY "blessed" state. e.g claiming service in countries where warranty is not for devices with unlocked bootloader or you want to sell it.
Otherwise do not bother with restoring the TA-partition. Doing so after the next steps will soft brick your device.
Go to SONY's developver world http://developer.sonymobile.com
Under drivers you find the drivers for the XZ under "Downloads" http://developer.sonymobile.com/downloads/drivers/xperia-xz/
These drivers are for Windows (which version?), do not bother if you are running a free operating system.
Install these drivers if you are a Windows user. Under Windows 8+ there could be problems with installing "non signed" drivers. Do a web/xda search to circumvent this security measure of Microsoft. http://www.flashtool.net/win8drivers.php
When you are installing: You also need to install the programs adb and fastboot.
https://forum.xda-developers.com/showthread.php?t=2317790
If you are running a free operating system: search for adb/fastboot or Android SDK in your repository and install these.
Running Linux it helps to insert the udev-rule mentioned in http://www.flashtool.net/lininstall.php otherwise you have to run esp. fastboot with root-privileges (not recommended, although the udev rule saves no punches ...)
You have to be root to save a partition - catch 22 :crying: ...
For Android Marshmallow ROMs, precisely up to version 39.0.A.3.30, exists an exploit of the copy on write function in the Linux kernel that gets you root privileges temporarily.
Follow https://forum.xda-developers.com/crossdevice-dev/sony/universal-dirtycow-based-ta-backup-t3514236
If you are already on Nougat you must downgrade the system ROM (see above) to use the exploit and backup the TA-partition.
TA-partiton backed up?
Now the non-reversible part:
Under http://developer.sonymobile.com/unlockbootloader/ you request an unlock code.
READ, READ what SONY have written there!
- You will lose some DRM functionality: https://forum.xda-developers.com/z3-compact/general/loss-drm-keys-t2890936
- Your device will factory reset. You have a backup?
You can get the IMEI-number from the original package of your phone (if you have good eye sight and nobody swapped the boxes) or pull a tab from the side of the phone (you do not want to do that) or print a screen shot of the relevant page of your service menu or head into settings->about device->status->IMEI-Info.
You follow SONY's instructions to unlock the bootloader and hold your breath as after a long reboot everything on your device is wiped. On the newer devices you get an ugly warning "the device can't be trusted anymore".
Hey, you have been warned. With the TA-backup you always can return to the chicken den.
Become a "developer"
- Tap seven times on the build number of your device. (settings->device info)
- then enable "OEM unlocking" (new for the 2016 devices like XZ) and "USB-debugging"
You have read the SONY advice?
Next decision: Root stock ROM or go Custom Rom?
Well - my opinion - for the newer SONY devices I have not found a recommendable custom ROM yet. I am VERY happy with a generic CyanogenMod on a tablet Z in my household. Do not ask me about the sad story of CyanogenMod as of late 2016...
Your mileage may vary: testing a ROM and reversing will cost you with a proper backup minimum 4-5 hours.
If you choose a custom ROM:
- read the thread to get a hunch if you really want to install it (get over the off topic newbie questions)
- Follow the instructions of the first page of the ROM-thread to install it. If you can not do this stop or be prepared for searching and learning.
On SONY devices I recommend rooting stock ROMs.
You need a custom kernel (aka boot image) with DM-Verity and SONY-RIC OFF.
This kernel has to be in sync with your ROM. Flashing an unsuitable kernel (e.g. MM-kernel on N-Roms) will result in a boot loop aka "soft brck".
You even can bake one yourself (no easy task) if you find/adapt the sources for your device. -> first stop SONY developer world
This is easy! THANKS to @AndroPlus
AndroPlus has also included many patches to improve battery life, mitigate some (e.g. camera) issues from the loss of the device keys ...
https://forum.xda-developers.com/xperia-xz/development/kernel-andropluskernel-v01-t3475240
AndroPlus has kernels for other devices too. Look into the specific device forum for a custom kernel,
Download the kernel and recovery for your device and ROM-version and follow AndroPlus' instructions.
Some hints: (most of these commands emit useful info on the command line - read it, post it if you are stuck)
adb reboot bootloader or switching OFF the device and then pressing the "volume up" button while plugging the USB cable (hooked to your PC! we need DC power for all this) gets you into fastboot mode. You see a black screen and the blue LED light.
I normally unpack the kernel-ZIP-file and flash this: fastboot flash boot boot.img
You get into recovery mode on booting by pressing the "volume up" button when you see the yellow LED light.
If you can not get into recovery (e.g. AndroPlus has no kernel for your latest SONY ROM):
fastboot boot TWRP_latest_version
I use an SD card (content there survives factory resets) and there a directory "for_recovery" well stocked with the zip-files I intend to flash.
Pressing the Power button and "volume up" for about five seconds gives you a hard reset.
If you like to read about the hard way:
https://forum.xda-developers.com/z4-tablet/help/enybody-root-t3154926
The first rooting of a DM-Verity secured device in 2015. Thanks to SONY for releasing source code and binaries.
Rooting - aaahh, finally
Flash the latest SuperSU from recovery.
https://download.chainfire.eu/1019/SuperSU
No: flashing AndroPlus or TWRP does not root your device. You'll have to flash Chainfire's ZIP-file!
Bonus: Debloat the device
https://forum.xda-developers.com/search/forum/2522?query=debloat
mine (you screened my script?):
flash the attached ZIP-file
View attachment 4000189
With opened bootloader you will not get OTA (over the air - prosaic?) updates any more!
You have to check with Xperifirm if there are newer ROMs for your device.
I have not had any problems with installing e.g. a Swiss ROM over a Central Europe. There could be some worries when switching continents.
Download the desired ROM via Xperifirm and follow the instructions of flashtool to flash the device. Accept the use of the FSC script.
Repeat the steps 5 to 6(7) for SONY ROMs followed by step 4 (if necessary).
If a wipe is needed I prefer the full wipe in TWRP compared to checking the boxes in FlashTool.
Click to expand...
Click to collapse
Woaw, thanks a lot for your awesome answer !
I receive my phone today, I'll follow your instructions

@DHGE your guide is well put, and I've not had any problems so far (I used a slightly different version of the Xperia ROM since the version you specified didn't show up, but it worked just fine, is sitting on Android 6.0, and I have the TA backed up).
I've obtained the unlock code from Sony's developer site, but I've still yet to get their email with the instructions on where to shove the code. Its been about two or three hours now, and it was sent to a Gmail address (which has received other mail since). I tried generating a new code to make sure the email was right (it was), and it spat out the same unlock code, so I'm guessing its just based off of the IMEI.
Question is: what does one do with the unlock code? I can't imagine the instructions would be different for each person and am not sure how long it may take Sony to email the Gmail account...

k2trf said:
What does one do with the unlock code?
Click to expand...
Click to collapse
Follow the steps on SONY's website where you obtained the unlock code.
Look at the big link at the right bottom after all the warnings...

Somehow I missed that completely, and just latched onto it saying to wait for the instructions via email. Honestly, I don't even know why they think it necessary. Anyone playing with unlock codes damn sure better be familiar with ADB and fastboot already, or be learning as they go. >_>

Hi,
there something I can do to roll back if I didn't backed up my TA partition?
thanks

bigkekko said:
Hi,
there something I can do to roll back if I didn't backed up my TA partition?
thanks
Click to expand...
Click to collapse
Roll back to recover TA? Unfortunately not.

[GUIDE][ROOT] QLink Scepter 8 Tablet (Gen 1 & Gen 2) | Bootloader Unlocking & Rooting Guide

QLink Scepter 8 Tablet​By Hot Pepper Mobile
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bootloader Unlocking
& Rooting Guide
For Gen 1 & Gen 2 Models​
TABLET MODELS & VARIANTS:
For those members familiar with the firmware restoration thread, there are a total of four model variants of the QLink Scepter 8 tablet: two variants of the Gen 1 model, and two variants of the latest Gen 2 model. Determining which Scepter 8 you have is a very simple two-part check. First, if you don't already know your Android OS version, go to device Settings> About tablet, and locate your Android version. If you are running Android 11 (Go Edition), you have the original Gen 1 model. If you are running Android 12 (Go Edition), your tablet is the latest Gen 2 model. Secondly, you will need to locate the device S/N in order to determine your tablet variant. Your S/N is printed on the manufacturer's label affixed to the exterior of the tablet's rear housing. From the Android OS, you can also locate your S/N by opening device Settings>About tablet>Model. Regardless of whether you have the Gen 1 or the Gen 2, the first two letters of your S/N will be either CF or MD. This is the codification of your tablet variant. To alleviate some of the legwork of rooting, and to keep this thread simple to follow, I have provided boot images pre-patched for Magisk v25.2 systemless root support. I have categorized the download links for each of the boot images in accordance with the respective model and S/N variant. To avoid potential bugs, instabilities, boot loops and the like, it is crucial that you download the boot image that corresponds with your model & variant. ​​OVERVIEW:
This guide outlines step-by-step instructions for unlocking the bootloader and rooting all variants of the Gen 1 & Gen 2 QLink Scepter 8 tablet. This guide also includes a detailed section on properly installing the ADB, fastboot, & USB device drivers on your Windows PC or laptop, as well as steps to troubleshoot & manually update these drivers in the event the tablet is not being recognized while in fastboot mode.
DISCLAIMER:
Unlocking your bootloader and rooting your device are both procedures that carry inherent risks. Because these procedures involve modifying the device from it's stock factory configuration, it is possible to corrupt, damage, or even render your tablet completely inoperable. By proceeding further, you are assuming sole responsibility for the integrity and operability of your device, therefore absolving me of any liability in the event something goes south. I have, however, tested these guides and feel confident that things will go smoothly as long as you follow the instructions carefully. Moreover, I encourage all members to read the instructions fully before starting the steps, in order to first gain a fundamental understanding of the concepts and methods involved.
PLEASE PLAY NICE & FOLLOW XDA RULES:
This thread was created with the intent of being a noob-friendly forum. This simply means that new and inexperienced members are fully welcome here, and will be provided with extra guidance and assistance if needed. Please keep in mind that XDA is a global community of developers, enthusiasts and device users. As such, and although English is the only permitted language in the forums & threads, not all members speak English as their first language, and often rely on text translation tools when asking questions & posting. Accordingly, it is very common for words to be misconstrued, meanings to be misinterpreted, and the context as a whole lost in translation. I ask members to be patient, compassionate and respectful to others on this thread. Those members with the knowledge to do so are urged and asked to help newer members, and recall back when you were new here and others helped you.
Please help me with keeping this thread on point by ensuring that all subject matter herein be kept relevant to the topics of rooting and OEM unlocking the QLink Scepter 8. Any posts about other devices or subject matter run afoul of XDA rules and are subject to removal by moderators -- and potential sanctions imposed upon the offending member. Moreover, an on-topic thread keeps things organized and easier to follow. Thank you for your consideration.
PREREQUISITES:
To unlock the bootloader and root the QLink Scepter 8 tablet, you will need a laptop or PC running on Windows 7/8.1/10/11. (A Mac or Linux machine can also be used. For purposes of this guide, however, I am focusing on a Windows setup.) You will also need the OEM-supplied or a quality equivalent micro USB to USB-A data sync cable. Last but not least, you will need to install compatible USB device drivers for ADB & Fastboot on your PC/laptop. I have included the 15-Second ADB Driver Installer below, under the DOWNLOADS section. This Installer will configure ADB & Fastboot system-wide, and installs the universal Google USB device drivers. I would encourage members to first read the instructions in their entirety prior to actually starting the guide.
•INSTALLING USB DEVICE DRIVERS•
This section is included to install and configure ADB, Fastboot and the proper USB device drivers on your Windows computer. This section can also be used to troubleshoot and fix issues involving your tablet not being recognized by Windows while connected in fastboot mode. If you have already installed the ADB & Fastboot tools (& the proper USB device drivers), and you are not experiencing fastboot recognition issues, you may skip this section and proceed to the bootloader unlocking section.
Many members have reported issues with device recognition while in fastboot mode. I have also noticed a persistence problem with Windows drivers on this tablet. I can manually update the driver using Windows Device Manager, enabling fastboot recognition; yet, once the tablet is disconnected from my PC the updated driver does not always persist, requiring a manual driver update each time fastboot mode is needed. Follow these steps to enable fastboot recognition of your device.
• 1. If you have not yet done so, install the 15-Second ADB Installer from the link below on your Windows PC or laptop. Open the utility and follow the prompts to install the ADB & Fastboot drivers. Next, opt to install ADB system-wide. Lastly, you will be prompted to install the Google USB device drivers. Select Y and install them. You should see an interface informing you that the drivers were successfully installed. NOTE: If you get a warning notification that the drivers are unsigned, select the option to install anyway;
• 2. With your tablet powered off, hold the Power and Volume Down buttons simultaneously until the QLink logo appears, at which time you release the Power button but continue holding Volume Down. When a green Android graphic appears on your display, you are in fastboot mode;
• 3. Connect your tablet to your Windows machine using the OEM-supplied or a quality equivalent micro USB to USB-A data sync cable;
• 4. Open a command window in the path of your ADB/Fastboot directory. Execute this command:
Code:
fastboot devices
If properly connected, the command window will return an alphanumeric string which is synonymous with your tablet serial number. If this occurs, you are finished with this section and may proceed to the instructions for unlocking the bootloader/rooting. If the command window displays Waiting on Any Device, or if your serial number is not displayed, continue with the following steps;
• 5. Keeping your device connected to your Windows PC/laptop, right click your Windows Start icon and select Device Manager. Locate your tablet in the menu. It will likely be located under either the Portable Devices or Android Device heading;
• 6. Right click your device and select Update Driver. Next, select Browse My Computer for Drivers. On the next screen choose the option for Let Me Pick From a List... Now you will see a list of drivers to select from. Depending on the manner in which Windows recognized your tablet in the Device Manager menu, the driver selection menu can vary. If you see an option for Android Device, select that option and then select Android Composite ADB Interface. Or, you may be directly presented with options for Android Bootloader Interface, Android ADB Interface and Android Composite ADB Interface. In any event, choose Android Composite ADB Interface and then click Next. Click Yes in the Update Driver Warning dialogue screen, at which time the drivers will be installed.
• 7. Return to your command window and again execute the fastboot devices command. If your serial number is displayed, your drivers are now properly installed. If you are still experiencing fastboot recognition issues, try using another data sync cable, change USB ports on your computer, and/or reinstall the drivers using the 15-Second ADB Installer.
I. UNLOCKING THE BOOTLOADER:
If you plan on rooting your tablet, this step is mandatory. If your bootloader is already unlocked and you only wish to root your device, skip down to the rooting instructions in the next section below.
WARNING: Unlocking your bootloader forces the device into a factory data reset, which will effectively wipe all saved user data from the device. Make a backup at this point if there are files and media on your tablet that you wish to keep.
INSTRUCTIONS:
1. Enable Developer Options on your tablet by going to device Settings>About tablet and tap Build number approximately seven times. Android will notify you that Developer Options are enabled; this menu will appear under device Settings>System>Advanced.
2. Enable USB Debugging and OEM Unlocking in the Developer Options menu. NOTE: Users have reported the OEM Unlocking option being greyed-out unless you are signed in to your Google account.
3. Now to boot into fastboot mode, and this particular step is extremely important. Android 10 introduced a new fastboot mode for dynamic partitions, known as FASTBOOTD, which is relocated from the bootloader to userspace. This particular fastboot mode supports resizeable partitions within the dynamic scheme, and enables the user to create, resize and delete various logical partitions. However, FASTBOOTD mode cannot be utilized to unlock the bootloader, and will not recognize the unlock command. As such, the user must rely upon legacy fastboot mode in order to unlock the bootloader. From stock recovery mode, you may simply choose the option to reboot to bootloader. DO NOT CHOOSE THE OPTION TO ENTER FASTBOOT, as this option will boot to FASTBOOTD. From the Android OS, you can boot into legacy fastboot mode by executing:
Code:
adb reboot bootloader
Once you see a green Android graphic appear in the center of your display, you are in the correct fastboot mode.
4. Connect your tablet to your PC/laptop using the OEM-supplied or a quality equivalent micro USB to USB-A data sync cable. Next, open a command window in the path of your ADB/Fastboot directory. Check your connection by executing this command:
Code:
fastboot devices
If you are properly connected, the command window will return an alphanumeric string synonymous with your device's serial number. If you do not see this, there is a problem with communications between your tablet and PC/laptop. To troubleshoot the issue, switch to another USB port, try another data sync cable, and/or reinstall the ADB/Fastboot drivers on your PC or laptop. Also, see my instructions above on installing USB device drivers on your Windows computer;
5. Once a proper connection has been verified, execute this command:
Code:
fastboot oem unlock
Once you see the Okay notification in the command window, your bootloader is now unlocked. Execute this command:
Code:
fastboot reboot
Your tablet will now initiate a factory data reset and then reboot into the initial setup for the Android OS.
II. ROOTING THE QLINK SCEPTER 8
Now that the bootloader has been unlocked, rooting this tablet is very straightforward. Again, I have provided pre-rooted boot image files in the DOWNLOADS section for all four models & variants.
INSTRUCTIONS:
A. Gen 1 QLink Scepter 8​Android 11 (Go Edition)​
NOTE: If your tablet is running Android 12 Go Edition, you're in the wrong place. Skip down to the next section.
1. Download the Gen 1 patched boot image that matches your S/N variant using the links below, and save the file on your PC/laptop in the ADB/Fastboot directory. Note that the file is named patched_boot.img. The flashing command below assumes that you leave this file name unchanged;
2. Go to device Settings>About tablet and tap Build number 7 times or until Developer Options are enabled. (This step is necessary if you unlocked your bootloader using the previous section, due to the factory data reset.) Enable USB Debugging in the Developer Options menu;
3. Power your tablet off. Hold the Power and Volume Down keys simultaneously until the QLink logo appears, at which time you release Power but continue holding Volume Down. The green Android will appear on the display to indicate fastboot mode;
4. Connect your tablet to your PC or laptop using a quality data sync cable. Verify your connection using the instructions in Step 4 of the bootloader unlocking section above;;
5. Once a solid connection is verified, execute these commands:​
Code:
fastboot flash boot patched_boot.img
fastboot reboot
NOTE: Your active boot slot should be boot_a. Regardless, the above command flashes your active slot by default, without having to specify slot _a or _b.
Upon reboot, your tablet will be rooted with the latest Magisk systemless root strategy. If you do not see the Magisk app or the placeholder stub in your app drawer, go ahead and download the latest version from the link below and install the APK on your tablet. Open the Magisk app, grant the prompted permissions, and follow any prompts to complete setting up the root environment.
B. Gen 2 QLink Scepter 8​Android 12 (Go Edition)​
NOTE: If your tablet is running Android 11 Go Edition, you're in the wrong place. Go back to the previous section. .
1.Download the Gen 2 patched boot image that matches your S/N variant and the empty vbmeta.img using the links below, and save the files on your PC/laptop in the ADB/Fastboot directory. Note that the boot image file is named patched_boot.img, and the vbmeta image is named vbmeta.img. The flashing commands below assume that you leave these file names unchanged;
2. Go to device Settings>About tablet and tap Build number 7 times or until Developer Options are enabled. (This step is necessary if you unlocked your bootloader using the previous section, due to the factory data reset.) Enable USB Debugging in the Developer Options menu;
3. Power your tablet off. Hold the Power and Volume Down keys simultaneously until the QLink logo appears, at which time you release Power but continue holding Volume Down. The green Android will appear on the display to indicate fastboot mode;
4. Connect your tablet to your PC or laptop using a quality data sync cable. Verify your connection using the instructions in Step 4 of the bootloader unlocking section above;;
5. Once a solid connection is verified, execute this command:
Code:
fastboot flash boot patched_boot.img
Now, continuing in fastboot mode, you will need to disable dm-verity/Android Verified Boot (AVB) by flashing an empty vbmeta.img via executing the following command:​
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Next, execute this command to reboot your device:
Code:
fastboot reboot
Upon reboot, your tablet should now be rooted with the Magisk systemless root strategy. If you do not see the Magisk app or the stub placeholder in your app drawer, go ahead and download the latest version from the link below and install it on your tablet. Open the Magisk app, grant the prompted permissions, and follow any prompts to update Magisk and/or complete setting up the root environment.
IMPORTANT NOTE:
In the unfortunate event you have a mishap with rooting your tablet and get stuck in a boot loop, or if your tablet will not otherwise boot into the Android OS, have no worries. My tutorial on firmware restoration for the QLink Scepter 8 will revert your device back to its original stock factory state. You can then return here and give it another try.
QLink Scepter 8 Firmware Restoration Guide
DOWNLOADS:
• 15-Second ADB Installer
• Gen 1 (CF) Patched Boot Image
• Gen 1 (MD) Patched Boot Image
• Gen 2 (CF) Patched Boot Image
• Gen 2 (MD) Patched Boot Image
• Empty vbmeta.img
• Official Magisk Releases / GitHub Repo
THANKS & MENTIONS:
Thanks goes out to Hot Pepper Mobile CEO Shawn Sun and Support Specialist Joshua G for providing stock firmware images for this device.
Also, I wish to recognize and thank @13lack13ox for being a huge help to thread members at times when I was not able.
​

For some reason, I'm stuck on the part where you have to use the fastboot option. So basically, I got my tablet in fastboot mode (the secondary one with the green android graphic), but when I tried to use the adb function, it doesn't detect my tablet. And also, the command, "fastboot devices" doesn't do anything, and when I try to use "fastboot device" it just says waiting for any device and just... stays there, not detecting my tablet. I tried multiple computers, tried both PowerShell and the command prompt with admin privileges, to no avail. For information, it worked when my tablet was on my tablet is the V9 firmware, but it slightly newer since I just updated to V9_20220224... so maybe that might have something to do with it...

64Star said:
For some reason, I'm stuck on the part where you have to use the fastboot option. So basically, I got my tablet in fastboot mode (the secondary one with the green android graphic), but when I tried to use the adb function, it doesn't detect my tablet. And also, the command, "fastboot devices" doesn't do anything, and when I try to use "fastboot device" it just says waiting for any device and just... stays there, not detecting my tablet. I tried multiple computers, tried both PowerShell and the command prompt with admin privileges, to no avail. For information, it worked when my tablet was on my tablet is the V9 firmware, but it slightly newer since I just updated to V9_20220224... so maybe that might have something to do with it...
Click to expand...
Click to collapse
Sounds like you have a common driver issue. Do this: with your device connected to your PC in fastboot mode, right click your Windows start button and open Device Manager. What is your tablet showing up as? We will need to update your driver. I can walk you through it. Did you install the Google driver from the 15-Second ADB Installer? I am nearly finished writing a guide on properly installing the device drivers. I will link it here when posted. It will give you a detailed step-by,-step outline. I don't think it's an issue with the firmware builds. Fastboot detection issues are common with this tablet due to some type of instability with driver persistence. For example, I often need to update my driver every time I use fastboot mode because, for some odd reason, the updated driver doesn't persist once the tablet is disconnected from the PC and then reconnected.

i dont have this tablet but another hot pepper device called the poblano. with that i was able to boot into ffbm from the bootloader and have root adb access. then i ran dd on my boot partition and patched it with magisk and flashed it back
wondering if hot pepper still makes their devices like that or they patched it. either way props to you for getting the fw straight from the oem

luridphantom said:
i dont have this tablet but another hot pepper device called the poblano. with that i was able to boot into ffbm from the bootloader and have root adb access. then i ran dd on my boot partition and patched it with magisk and flashed it back
wondering if hot pepper still makes their devices like that or they patched it. either way props to you for getting the fw straight from the oem
Click to expand...
Click to collapse
The Scepter 8 does not ship with adb root shell (adbd) enabled. In fact, the bootloader was not even intended to be unlocked. The unlock command is disabled in standard fastboot mode. Luckily, the Scepter 8 is integrated with a second fallback fastboot mode, which we were able to use to to the oem unlock.
Many AllWinner tablets and other Chinese devices do, as you pointed out on your Hot Pepper device. When the Scepter 8 was first released I was able to pull a boot image using a Phoenix Suite tool that had been reverse engineered and modded. As luck would have it, I got rid of the tablet and lost my files along with access to the Phoenix Suite tool. So I've been weeks quarreling with Hot Pepper Mobile to provide firmware and the kernel source code. To their credit, the Hot Pepper CEO and support team were very helpful once they understood what I needed. Hot Pepper's software developers are in China, so a language translation issue hindered my request for some time.
Anyway thank you for your kind words and it is a pleasure making your acquaintance.

@64Star I have updated the thread above with some detailed instructions on updating your device drivers. Hope this helps.

Viva La Android said:
@64Star I have updated the thread above with some detailed instructions on updating your device drivers. Hope this helps.
Click to expand...
Click to collapse
It does, I've unlocked the bootloader and now i'm gonna go root it. Thanks for your help!

I have an unfortunate update: When I went to turn on my tablet, I've noticed there was a noticeable crack on the top left corner of the screen... and then when I tried to use it... the touchscreen no longer functions. I have no clue where that crack came from, cause that wasn't there yesterday, and I've kept it safe in a drawer until now, so I have no clue how it's possible. Guess the software isn't the only thing that's cheap, cause my 2020 Moto G Power survived way worse without even a single crack.
TL,DR: Touch screen somehow broke overnight, meaning I can't get past the setup screen, so GG no re, this $10 qlink tablet ****ing sucks.

64Star said:
I have an unfortunate update: When I went to turn on my tablet, I've noticed there was a noticeable crack on the top left corner of the screen... and then when I tried to use it... the touchscreen no longer functions. I have no clue where that crack came from, cause that wasn't there yesterday, and I've kept it safe in a drawer until now, so I have no clue how it's possible. Guess the software isn't the only thing that's cheap, cause my 2020 Moto G Power survived way worse without even a single crack.
TL,DR: Touch screen somehow broke overnight, meaning I can't get past the setup screen, so GG no re, this $10 qlink tablet ****ing sucks.
Click to expand...
Click to collapse
@64Star I hate to hear that but I know exactly how it goes. I've cracked many a screen in my day. But, on a positive note, if you have the extra funds, there are a ton of these tablets available on eBay within the $35 to $40 price range.

Viva La Android said:
@64Star I hate to hear that but I know exactly how it goes. I've cracked many a screen in my day. But, on a positive note, if you have the extra funds, there are a ton of these tablets available on eBay within the $35 to $40 price range.
Click to expand...
Click to collapse
LOL really turning a profit!

13lack13ox said:
LOL really turning a profit!
Click to expand...
Click to collapse
Haha. No doubt

Sorry about the delay on TWRP guys. My mounting issues are actually encryption issues. TWRP isn't decrypting the /userdata or /vendor partitions with the default key. I'm going to chat with one of my friends over at TeamWin and see if I can get a little guidance.

Viva La Android said:
@64Star I hate to hear that but I know exactly how it goes. I've cracked many a screen in my day. But, on a positive note, if you have the extra funds, there are a ton of these tablets available on eBay within the $35 to $40 price range.
Click to expand...
Click to collapse
You really expect me to shell out around 35$ to 40$ on a slow, laggy 10$ tablet just to experiment on? Hahahahahaha....
Spoiler
Perhaps

64Star said:
You really expect me to shell out around 35$ to 40$ on a slow, laggy 10$ tablet just to experiment on? Hahahahahaha....
Spoiler
Perhaps
Click to expand...
Click to collapse
Not really. I was only providing you info as to where they were available. I found one for $19 which is more than I really wanted to give.
As it stands now,.all the lag is gone in mine. I debloated everything that wasn't essential for normal operations. Then I edited the system/build.prop to increase responsiveness and I limited background apps & processes. Finally, I installed a kernel tuner and set the LMK to very aggressive, tweaked the I/o scheduler parameters, and increased entropy from the available pool. And set SELinux to permissive mode. I'm using Nova Launcher Premium with the launcher locked into memory. Believe it or not, the tablet is now very responsive considering the specs. I'm looking into overclocking the CPU a bit, but 1.46 GHz seems to suffice once RAM is optimized. It's a difference in night and day. It's good for a project tablet but that's about it.
There's another government tablet floating around called the Maxwest Nitro 7Q. 4G/LTE supported with a lot better specs. I think I have one located to buy for cheap.

Lots of tweaks it doesnt run too bad just removing bloatware. Would be cool to get your params on your tweaks etc. If you ever got time could you post it up? Maybe the rom you were talking about in another post has all that included? Anyways if not no biggie, this thing is just for playing around on.

13lack13ox said:
Lots of tweaks it doesnt run too bad just removing bloatware. Would be cool to get your params on your tweaks etc. If you ever got time could you post it up? Maybe the rom you were talking about in another post has all that included? Anyways if not no biggie, this thing is just for playing around on.
Click to expand...
Click to collapse
Absolutely. I'll list those for you here in just a little bit. I have a pure stock ROM built with a TWRP installer, but my TWRP has run into a snag. I've reached out to TeamWin for guidance on that.

All in good time, man. Just glad someone with knowledge is doing all this. Wish I could help more. My ability to program and compile is equivalent to stick poking. I've done it once with aosp 6 that was awhile ago.

13lack13ox said:
All in good time, man. Just glad someone with knowledge is doing all this. Wish I could help more. My ability to program and compile is equivalent to stick poking. I've done it once with aosp 6 that was awhile ago.
Click to expand...
Click to collapse
You seem to know your way around the Android OS pretty well. I'm a developer in training myself. Learning every day. Yeah AOSP 6, I still love working with the Marshmallow builds.
Ok first things first. I notice a huge performance boost from some kernel level mods. Here is a link to Kernel Toolkit. Install both APKs. https://mega.nz/folder/QYwA0QTA#O_Zg3h_iVkHOdeyU_yOmLw
First go to the CPU heading and change the scaling governor to Ondemand. Under CPU Governor Params, tap on Performance Profile and select Maximum Performance (you may personally want to scale back to Aggressive or Balanced, depending on your need for battery life). Now, close Kernel Toolkit and restart the app. Next go to the I/O heading. Choose kyber as the I/o scheduler and set the read ahead buffer to 512 KB. Go down to ZRAM and increase to the maximum of 1000 MB. Set Swappiness to 100. Go over to the Profiles heading, create a profile will all settings and give it a name recommended from the list. When complete, tap on the profile, select save settings and then apply settings.
Now go to the menu button in the upper left of the app. Go down and enable Apply Settings on Boot. Select All and set a 5 second delay.
Next, download a build.prop editor from Play Store. There are tons of free ones and any will suffice. Make a backup of your system/build.prop before you tweak anything. Open the editor and grant root permission.
For build.prop edits, locking your launcher into memory helps a lot with responsiveness. Add this line to system/build.prop
ro.HOME_APP_ADJ=1
This basically prevents the launcher from being killed by Android's native LMK.
To increase touch responsiveness, add these lines as well.
debug.performance.tuning=1
video.accelerate.hw=1
Disable the boot animation for faster boot time.
debug.sf.nobootanimation=1
Reboot to enable the tweaks.
Give these a try and let me know your feedback. I'm working on a few more mods to optimize this tablet and I'll keep you posted on those as well.

Thx great changes so far. Yeah more "snappyness" for sure. I'll have to play around and open up as much as i can swap around.
I can't change I/O scheduler though, I get a contact developer message.

13lack13ox said:
Thx great changes so far.
Click to expand...
Click to collapse
Yw. Do you notice a decent improvement?