Hi, I've got an Honor 9 with unlocked bootloader and everything, today I was trying to change version of the Twrp because the one I had gave me some problems. So I decided for an older version ( "stf-twrp-zxz-0.2.img" found here), I flashed it and rebooted, but it freezed with the Teamwin logo and whatever combination of buttons I try to shut it down it keep booting in recovery, ending stuck in that situation. Thank you for your time.
P.S. If I connect the phone with a computer adb recognize the device and works fine, but I don't know how to handle it.
Related
(backstory) Hi, ive had an Asus TF300T, for about 3 years now, unlocked, rooted it pretty early on... cycled between cyanogenmod and omnirom quite a bit, without really any major issues. Until today, i was running Cyanogenmods latest nightly build (CM11 Nov 5 2014), it worked just as any other nightly does a few bugs here and there, but nothing major and i hadn't done any major flashing or modding to the device. On my home from university, I turned my tablet off. And when i got home i plugged in the charger, and just as always the tablet turned on, showed the stock Asus screen, then changed to the Android boot animation... the animation then suddenly froze, and the device went into a boot loop... continuously... I dont know whats weong with it... tried to do a factory reset, i tried reinstalling the ROM, tried installing omnirom, but that got stuck on the OmniRom animation...
Im running Asus build 10.6.1.27.5
I had TWRP v2.7.0.1 installed but have now no longer works
id really hope there is a solution for this!
Thanks!
Edit: I dont know why, but when i try using fastboot or adb, the device isnt recognized. It doesnt show up on device manager either. I dont know if its the cable cause i bought it new, it says its can sync data, or a faulty charge/sync port....
razr9622 said:
(backstory) the tablet turned on, showed the stock Asus screen, then changed to the Android boot animation... the animation then suddenly froze, and the device went into a boot loop... continuously... I dont know whats weong with it... tried to do a factory reset, i tried reinstalling the ROM, tried installing omnirom, but that got stuck on the OmniRom animation...
Im running Asus build 10.6.1.27.1 (I know that theres a newer version 10.6.1.27.5, but when i try to flash it, the recovery says error and fails)
I have TWRP v2.7.0.1 installed but have now no longer works
id really hope there is a solution for this!
Thanks!
Click to expand...
Click to collapse
^THIS!
I was just to open a similar thread, then i saw your post. I join your request for help!
A month ago i have done a favor to a friend by unlocking his tf300t and installing CM11 on it. A few days ago he comes to me with this problem. I've tried anything but still no success:
- restore a backup done before flashing CM11 --> restore ends correctly but the problem remains
- flash a rom (CM11 and OmniRom) --> flash ends correctly but the problem remains
- flash the stock firmware found on asus website (WW_epad-user-10.6.1.27.5.zip, the SKU is correct for my version) --> the flash process stuck (i had to force restart the tablet after almost 2 hours of "flashing")
Since the boot animation changes according to the rom, i suppose the flashing process works. But the problem remains: after a few seconds the animation freeze and the device restarts, in loop.
Informations on the system:
- build 10.6.1.27.5
- TWRP v2.7.0.1 (working!)
- adb works (i managed to set /data as rw and push the .zip file to flash)
- fastboot should work
Please help! I feel a bit responsible for bricking my friend's device
SOLVED!
Finally!
I had already tried this method, before requesting for help, but the first time didn't worked... I don't know why this evening the tablet decided to collaborate:
http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
That worked for me! :victory:
I have looked at multiple guides on this and other sites, googled and tried stuff and I cannot resolve this problem. Hopefully I am posting in the right place.
I took the jump and unlocked the bootloader on my Moto G first generation, XT1034 successfully. I flashed TWRP 2.8.60.xt1034.zip with adb and this was successful. Then I flashed Super SU 4.6 Update and that was successful. I got into trouble I guess when I tried to flash Cyanogenmod 12.1 nightly. I used TWRP to flash via install. The flash had an error, which unfortunately I didn't write down. I believe it was something to do with a partition. However, it looked like the flash failed. At this point and for hours I have been trying to fix the "Warning Bootloader Unlocked Loop I am stuck in.
I have been able to get into the phone and flash via adb commands. I've tried several commands suggest to fix this that I have found in forums. I have tried flashing several recoveries including an older TWRP per the method in this thread, a clockworkmod - and the original 2.8.6.0.xt1034. When I get into the phone bootloader which is available, I have not been able to access any options in recovery. Pushing the power button on recovery leads to a blank screen sometimes followed by a recovery starting or a Motorola Logo starting up and a couple times a recovery. TWRP has started a couple times, but never gets past the intro screen, where it locks up. clockworkmod (clockworkmod-6.0.4.7-falcon.img started once after flashing through adb and gave me flash options. I tried to sideload, didn't understand, went back and the recovery locked up. These recoveries no longer load at all.
Through all of this the "Warning Bootloader Unlocked" logo screen comes up after plugging into the computer (Windows 8.1).
Example, I open the phone bootloader by waiting for the phone screen to go from the "Warning Bootloader Unlocked" screen to blank - it cycles from logo to blank. If I'm quick the phone and hard boot the phone will boot into bootloader. I connect to the laptop through USB. When I toggle to recovery and hit the power button the screen goes blank, the Motorola Logo pops up, goes blank and then the "Warning Bootloader Unlocked" appears. The Laptop then seems to connect and disconnect as the Warning screen comes on and turns off.
The factory selection just goes to a blank screen.
I would really appreciate some advice on how to get the phone back to a state in which I can work with it and try again. It is very difficult wading through all of the information out there. I've learned a lot through this issue, but can't take it any further.
Thanks, Jeff
Solved - Stuck in "Warning Bootloader Is Unlocked" Loop
This resolution took many hours to figure out, but I finally got there with this guide - http://forum.xda-developers.com/showthread.php?t=2542219, this thread - http://forum.xda-developers.com/showthread.php?p=54855457#post54855457 and this thread - http://forum.xda-developers.com/gen...e-firmware-t3042687/post59139823#post59139823.
I tried RSD Lite on different computers and USB cables I could not get the device recognized. So I ended up with the MfastbootV2 method to reload stock firmware, which I found on the firmware thread above - this was big, as my phone is with Wind Mobile in Canada and the link is the right one. The only thing I picked up from a different website was to use a computer with USB 2 ports. This is what I did, but I don't know one way or the other if USB 2 was needed. .
Can't thank you hard working guys enough for the time you take to put these threads together. I'm back up and running. As a bonus, after a big clean up in the process, my phone is running fast again.
Thanks everyone.
Hi, people. I hope you can help me.
My problem is that my rooted Nexus 7 (2012) with 3G and kitkat Stock Android suddenly turned into so called brick state. Only Google logo was appearing during the boot, and that will last forever. Then, just for interest, I tried to enter into the recovery mode (Clockwork Recovery v6.0.4.3 for tilapia), but the device did not go into it. The logo of CWM appeared in the middle of the screen and then the device reboots automatically showing the Google logo screen for several seconds and then going into recovery mode with the CWM logo appearing on the centre of the screen, and then reboot again. This recovery bootloop lasts forever or till the battery runs out. I tried to use
Code:
adb devices
and
Code:
fastboot devices
on my nexus 4, everythings works fine (meaning drivers are installed correclty). But
Code:
fastboot devices
for the nexus 7 outputs into
Code:
- waiting for device -
I tried to force the battery to run out and then tried to go into fastboot, but that did not help, the recovery bootloop appeared on its own again. Please, help me, I don't know what to do.
EDIT. I tried to pull out the battery for a half day (disconnect battery connectors) in hope that this will somehow reset the boot options, but this did not help.
Any thoughts?
Also, if the thread is not in the appropriate branch of the forum, please, let me know, probably at correct location I will find more help. Thanks.
EDIT2. I solved the problem by trying to enter the bootloader mode via adb. But to enter bootloader required a liitle bit of humoristic approach. I was pressing UP then ENTER to enter fastboot mode via termianl (#adb reboot-bootloader) for 5 to 10 minutes. When I managed to enter the fastboot, I flashed TWRP recovery for tilapia and the latest 5.1 Lopllipop But it seems there is a bug in the stock recovery because it does not work with NEXUS 7, the last two updates of Kitkat and Lollipop required to flash custom recovery, because the stock one did the bootloop on either Google logo or the animation of "beautiful" circles.
Thanks for reading, hope this might help someone.
from danik
Hi,
Glad to hear it solved
Good Luck!
Thread Closed.
Greetings everyone,
I decided to post my problem with my phone after searching the entire internet for similar problem but with no luck. Anyway I used to play around with my Samsung j7 pro for 2 years, I managed to flash twrp and thus many other custom roms, until last week when I recklessly flashed a sboot.img.tar file through Odin in order to fix cellular network in a rom I flashed earlier, this alone bricked my phone refusing to get past the Samsung logo, so like I do always, I tried to restore my phone by flashing the stock firmware (9.0) which I always keep on my PC, but surprise, the phone refuses to go through the process and gives me this error:
sw rev check fail bootloader device -1 binary 6
(same with 8.0 and 7.0 firmware)
I searched the internet for same error but with no luck, because I understand it's a mismatch between device bootloader current version and the firmware bootloader's, that they should be the same or higher, meaning you can't downgrade, I get that! but I never seen device with negative figure (-1) what that's supposed to mean? my device bootloader used to be on 6, how did it managed to jump to minus one ?
then I tried to flash TWRP to see if I could flash a rom and get around it, so I did, but when booting into recovery the screen goes black, I thought first the phone turned off, but not really, because TWRP seems to work with screen completely black, I knew that because I accidentally touch the screen and I sense vibration, I managed to reboot the phone via twrp just by guessing the buttons location (screen always black) in order to prove that TWRP is working with screen off. I tried to flash multiple TWRP versions but the same problem, no screen just touch, by the way there is nothing wrong with display hardware because it shows Samsung logo at start and also can boot into download mode just fine.
I hope someone could help me overcome this big of an issue, because I tried everything.
Hi All,
I'm enjoying my first rooted phone for some months now. It's a s8+ with android 12.
But today out of nowhere my phone crashed and now i'm stuck on the teamwin logo page (3.5.2_9-0)
What i've tried:
Using odin again to install the exact same version from my downloads folder again. But this doesn't do a thing
Install a new twrp version from it's website. But then the samsung s8+ logo comes up, and the phone seems to restart immediately and ends in a loop.
I have no clue what to do and trying to search what i have to do but can't find anything but what i've done already.
This is my first rooted phone, so a bit of a noob.
edit: i've tried other versions, but it seems that only 3.5.2_9-0 gets through the samsung logo, but not further then the teamwin logo)n
And in can still enter download mode.
The logo seems to go away for a second every minute
At the moment i followed this tutorial (in januari)
My phone was 4 years old, i guess i'll buy a new one. Perhaps someone can tell me if i can reach my files. Most is backupped correctly but my signal (messenger) backup seems to be backuped to my phone itself instead of the SD card