Related
This one click root is only for windows. Make sure to enable usb debugging, then simply extract, then click on root tool sharp program. Once up, just click on the root button, press yes if windows asks you if it is ok to run this program, and soon enough your og droid will have rz recovery, and full root. This works on all froyo builds, including frk76. It does not work on eclair. Do not use this if you already have root, or are running a custom rom simply because you do not have to.
Should have put this here a long time ago. This will NOT work, if you do not have a sd card inserted and working properly on your device:good:
OG droid oneclick V1.0#: http://dl.dropbox.com/u/46535328/droid_oneclick_sharp.zip
Please give feedback, and if this program helps you, then please press the thanks button
Disclaimer: I can not be held responsible for any negative side affects this program causes
Thanks: motocache1,Cyanogenmod, ChainsDD, and raidzero.
If this program does not work for you, you may need to go download .net 4.0 redistributables from microsoft, and/or the motorola drivers.
the root tool app doesnt open any ideas? im running windows 7
joey.gunnarson said:
the root tool app doesnt open any ideas? im running windows 7
Click to expand...
Click to collapse
Yeah, there is a c++ redistributable error. I will fix this and get a new version up in a while. I will have to rewrite in c#, which means my extra features will be gone for now, but one click will still be there.
Wow...That was SUPER EZ!!! Thanks has been GIVEN!!!!b You guys are AWESOME!!!!
rootfan said:
Yeah, there is a c++ redistributable error. I will fix this and get a new version up in a while. I will have to rewrite in c#, which means my extra features will be gone for now, but one click will still be there.
Click to expand...
Click to collapse
So is this a windows 7 problem or something wrong with the method itself?
If I root my og droid will it speed up at all?
well you can overclock, flash new roms, and flash different kernals so yes you can speed it up.
and does this link work as is?
i know what i'm doing with tbolt but clueless with droid.
recDNA said:
and does this link work as is?
i know what i'm doing with tbolt but clueless with droid.
Click to expand...
Click to collapse
The link does work as is, but only for windows operating systems. If you choose to install kernels using rzrecovery which my program installs , then your droid will have major speed improvments.
If you have any problems with the procedure then read the op, and make sure to thank me
windows 7 too?
recDNA said:
windows 7 too?
Click to expand...
Click to collapse
xp, vista and windows seven will all work perfectly
Sleep 300 was kinda stupid but the script works!
It made my Nod32 go nuts though, so if you're getting "this is a virus" from your software, you'll have to disable that before downloading, unzipping and using then re-enable it afterward.
I have no idea what you're talking about?
recDNA said:
I have no idea what you're talking about?
Click to expand...
Click to collapse
Line 10 in the root script:
adb shell "./data/local/tmp/rageagainstthecage & sleep 300;kill $!"
It hangs for like 5 minutes. I got a laugh out of it. And there are no virus' on the download, my stupid anti-virus thought there was so I was just letting people know it's safe, even if their software says it isn't.
why is sleep 300 there?
rootfan said:
This one click root is only for windows. Make sure to enable usb debugging, then simply extract, then click on root tool sharp program. Once up, just click on the root button, press yes if windows asks you if it is ok to run this program, and soon enough your og droid will have rz recovery, and full root. This works on all froyo builds, including frk76. It does not work on eclair. Do not use this if you already have root, or are running a custom rom simply because you do not have to.
OG droid oneclick V1.0#: http://dl.dropbox.com/u/46535328/droid_oneclick_sharp.zip
Please give feedback, and if this program helps you, then please press the thanks button
Disclaimer: I can not be held responsible for any negative side affects this program causes
Thanks: motocache1,Cyanogenmod, ChainsDD, and raidzero.
If this program does not work for you, you may need to go download .net 4.0 redistributables from microsoft, and/or the motorola drivers.
Click to expand...
Click to collapse
well, not sure what I'm doing wrong but here is my experience:
OG Droid 2.2.3 (build FRK76). Attached to computer with usb debugging on in charge only mode. Run root tool sharp.exe, one click root box opens. Click on the 'Root' button and the cmd prmt window pops up and runs some scripts. It hang on line 10 for about 5 mins, blazes through the rest of the script (too fast for me to read what it's doing), closes itself and reboots my phone. when the phone reboots i do not have SU installed. I'm running Windows 7 (64bit) if that matters. Please let me know if i'm missing a step or doing something wrong.
thanks in advance.
i'm having the same issue as the guy above.. seems to be issues with the chmod777 part for me.. mostly the "rageagainstthecage" file doesn't seem to push or activate right, then adb can't find it..
Any Tips?
i'm in USB debug mode.. i have an sd card in.. i have the USB drivers from moto..
For anyone with problems make sure your sdcard is inserted and indeed working properly Make sure it isnt to full eaither. If you have a screen lock set up, make sure to unlock your phone before performing this process. should work after that.
i know this sounds stupid but this recovery will work on all roms?¿ and how do i enter into the recovery?¿ sryy my bad english am from dominican republic
htc s620 said:
i know this sounds stupid but this recovery will work on all roms?¿ and how do i enter into the recovery?¿ sryy my bad english am from dominican republic
Click to expand...
Click to collapse
The recovery will work on all roms just make sure to wipe before install
You can get into recovery by holding the x button on the physical keyboard and the power button.
Sent from my SCH-I535 using xda premium
Has anybody seen this???
http://forum.xda-developers.com/showthread.php?p=29479707
All credits to the original developer.m just sharing....
Press thanks if i helped...
Sent from my GT-I9003 using xda app-developers app
loneagl said:
Has anybody seen this???
http://forum.xda-developers.com/showthread.php?p=29479707
All credits to the original developer.m just sharing....
Press thanks if i helped...
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
that was super ****ing awsome...! Unfortunately I am currently busy in some work outside home. I will test it after few hours. Can anybody provide loading modules for rom ddlf2 urgently???
Edit : I am suspicious whether it will work or not because of this information provided in that thread
I am adding this here as this should work on any android device with support in the kernel for USB OTG and mass storage
Click to expand...
Click to collapse
vishal24387 said:
I am using galaxy i9003 with 2.3.6 stock rom rooted with cf root kernel. My installed kernel dont support for usb otg. Then will it be possible to use this app to enable usb otg in my phone with help by loading modules???
Edit : where are modules???
Click to expand...
Click to collapse
Any phone with either in-built mass storage support, or custom kernels or having required modules (for stock kernel).
I think you need to find and load the modules yourself before using the application.
Skander1998 said:
Any phone with either in-built mass storage support, or custom kernels or having required modules (for stock kernel).
I think you need to find and load the modules yourself before using the application.
Click to expand...
Click to collapse
Ya I read that. Can anybody provide me necessary modules for DDLF2 rom??
can we use these modules??
forum.xda-developers.com/showthread.php?t=1244744
vishal24387 said:
Ya I read that. Can anybody provide me necessary modules for DDLF2 rom??
Click to expand...
Click to collapse
or xwlf2
Vishal, I gave u the ddlf2 modules by facebook, but I pase it here... http://www.mediafire.com/?laky21qc651oo3g
luiseteyo said:
Vishal, I gave u the ddlf2 modules by facebook, but I pase it here... http://www.mediafire.com/?laky21qc651oo3g
Click to expand...
Click to collapse
oh wow...thanx buddy. Just a quick question that I am using XDA_BAM v14fix cf root kernel. Do I need to install a saperate busybox OR its already included in kernel???
Edit:- It does not contain necessary modules of usb otg. Amit once provided me all modules necessary for usb otg but they are for xxkph. You can find those old modules in the thread whose link I have posted in above post.
vishal24387 said:
oh wow...thanx buddy. Just a quick question that I am using XDA_BAM v14fix cf root kernel. Do I need to install a saperate busybox OR its already included in kernel???
Edit:- It does not contain necessary modules of usb otg. Amit once provided me all modules necessary for usb otg but they are for xxkph. You can find those old modules in the thread whose link I have posted in above post.
Click to expand...
Click to collapse
Argg i thought u needed modules folder under system. If i can do anything more just tell me please
Sent from my GT-I9003 using xda app-developers app
luiseteyo said:
Argg i thought u needed modules folder under system. If i can do anything more just tell me please
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Oh surely buddy. I am always thankful to u Do u have usb otg cable???
I don't think that building the modules is enough, that's what amit and DooMLoRD tried to do.
Anyway, if you really want to try it, I built the modules (they should work with every universal kernel, but I didn't try them).
link: otg.zip
CF-root kernels provide a minimal busybox, but sometimes it's not powerful enough. For example Droidwall doesn't work so well with it.
I usually use this installer, a reboot is required after the installation of busybox (not the app).
I can't do more than this.
EDIT:
I can see that the app uses fuse.ko and ntfs.ko too: otg-2.zip
EDIT 2:
I forgot to strip them to make them smaller: otg-stripped.zip. These are just smaller and this zip contains all the modules. This is not a flashable zip.
loSconosciuto said:
I don't think that building the modules is enough, that's what amit and DooMLoRD tried to do.
Anyway, if you really want to try it, I built the modules (they should work with every universal kernel, but I didn't try them).
link: otg.zip
CF-root kernels provide a minimal busybox, but sometimes it's not powerful enough. For example Droidwall doesn't work so well with it.
I usually use this installer, a reboot is required after the installation of busybox (not the app).
I can't do more than this.
EDIT:
I can see that the app uses fuse.ko and ntfs.ko too: otg-2.zip
EDIT 2:
I forgot to strip them to make them smaller: otg-stripped.zip. These are just smaller and this zip contains all the modules. This is not a flashable zip.
Click to expand...
Click to collapse
Like always thanx buddy Your modules loaded successfully But as expected that usb otg app is not working May be our phone does not deliver any voltage to external device. Cant we change anything in kernel to give power by phone to external usb device???
Edit:- A little OT info I from u. I have installed busybox that u have suggested. When I open busybox then it shows lots of files need to install. But I purpisefully didnt installed it. Last time when I tried to install those files my phone was bootlooping Why it happens??? If I want to install busybox from busybox installer then which stable version of busybox should I install from busybox installer??
I guess the latest one:thumbup:
Inform us about the results, good luck
Sent from my GT-I9003 using xda app-developers app
vishal24387 said:
Like always thanx buddy Your modules loaded successfully But as expected that usb otg app is not working May be our phone does not deliver any voltage to external device. Cant we change anything in kernel to give power by phone to external usb device???
Click to expand...
Click to collapse
You should know it:
http://forum.xda-developers.com/showpost.php?p=26821044&postcount=279
http://forum.xda-developers.com/showpost.php?p=27082149&postcount=284
Maybe it's possible to make it work with every kind of USB device, but you need to wait for someone experienced.
Anyway I tried the app just to see if the modules are automatically loaded. It loaded only fuse.ko and it showed "NTFS support" even if I didn't add the module. When I did it, it showed "read-write" even if I added only "read" capabilities. Maybe it loads them in the wrong order.
If someone is interested, I found this: http://talk.maemo.org/showthread.php?t=65232
I don't know if it works, but a female to female USB adapter is cheaper than a USB OTG cable and these Nokia cables (CA-101D) are quite common. Don't blame me if it won't work as USB OTG cable.
vishal24387 said:
Edit:- A little OT info I from u. I have installed busybox that u have suggested. When I open busybox then it shows lots of files need to install. But I purpisefully didnt installed it. Last time when I tried to install those files my phone was bootlooping Why it happens??? If I want to install busybox from busybox installer then which stable version of busybox should I install from busybox installer??
Click to expand...
Click to collapse
The list of files are actually symlinks (they use no space). If you don't add them when you want to use a busybox tool, instead of typing only the name of the tool, you need to type "busybox" too. For example, if you want to use "cat", you have to type "busybox cat". It shouldn't be a problem if you don't add them, but I install busybox because I use some of its tools, so I had always added them. Maybe apps need them.
Anyway, read this (taken from here):
Chainfire said:
Installing busybox over the included version on GINGERBREAD ( CF-Root versions >= 3.0 )
It is possible to install a custom busybox over CF-Root v3.0 and newer. However, this is not without risk. CF-Root makes heavy use of scripting, and many CF-Root scripts rely on the internal busybox version. If you do install a seperate busybox version (always use "stericson" installer!), install it to /system/xbin. Installing it to /system/bin will mess things up for sure. Even if you do that part right, it may still break CF-Root, so make sure to make a backup before trying.
Click to expand...
Click to collapse
Maybe the problem was that you didn't have enough space in /system and busybox was not completely copied.
I can't remember which version I used, but all the versions provided by stericson's installer should be ok.
loSconosciuto said:
You should know it:
http://forum.xda-developers.com/showpost.php?p=26821044&postcount=279
http://forum.xda-developers.com/showpost.php?p=27082149&postcount=284
Maybe it's possible to make it work with every kind of USB device, but you need to wait for someone experienced.
Anyway I tried the app just to see if the modules are automatically loaded. It loaded only fuse.ko and it showed "NTFS support" even if I didn't add the module. When I did it, it showed "read-write" even if I added only "read" capabilities. Maybe it loads them in the wrong order.
If someone is interested, I found this: http://talk.maemo.org/showthread.php?t=65232
I don't know if it works, but a female to female USB adapter is cheaper than a USB OTG cable and these Nokia cables (CA-101D) are quite common. Don't blame me if it won't work as USB OTG cable.
The list of files are actually symlinks (they use no space). If you don't add them when you want to use a busybox tool, instead of typing only the name of the tool, you need to type "busybox" too. For example, if you want to use "cat", you have to type "busybox cat". It shouldn't be a problem if you don't add them, but I install busybox because I use some of its tools, so I had always added them. Maybe apps need them.
Anyway, read this (taken from here):
Maybe the problem was that you didn't have enough space in /system and busybox was not completely copied.
I can't remember which version I used, but all the versions provided by stericson's installer should be ok.
Click to expand...
Click to collapse
Really thanks for such detailed information I think usb otg feature is not simple as it looks It needs heavy coding, modding & dedicated talented developer. But still I will try with a usb power hub.
Can anybody tell me at what price a cheapest usb power hub I will get in indian local market? Or at what price I will get a cheapest usb y cable in indian local market??
vishal24387 said:
Like always thanx buddy Your modules loaded successfully But as expected that usb otg app is not working May be our phone does not deliver any voltage to external device. Cant we change anything in kernel to give power by phone to external usb device???
Click to expand...
Click to collapse
If our phone is not delivering any voltage to external device can we use device with external power source? I have an external hard drive with power source but dont have USB OTG cable to try out.
vibhorrr said:
If our phone is not delivering any voltage to external device can we use device with external power source? I have an external hard drive with power source but dont have USB OTG cable to try out.
Click to expand...
Click to collapse
hummm...good. But I think external hard disk will be too heavy to connect to a small phone. I wil suggest u to connect a small pen drive using usb power hub. But still u can try ur expernal hard disk just for a try.
For otg wire take a look here
http://forum.xda-developers.com/showpost.php?p=28611969&postcount=266
I have attached my modded usb otg cable.
@ loSconosciuto
Can u take a look at this log file of otg helper app??forum.xda-developers.com/showpost.php?p=29545801&postcount=10
vishal24387 said:
@ loSconosciuto
Can u take a look at this log file of otg helper app??forum.xda-developers.com/showpost.php?p=29545801&postcount=10
Click to expand...
Click to collapse
There's nothing interesting there, I can only see the modules are loaded.
To see if USB devices are connected I'd use a busybox tool: lsubs
Code:
insmod /system/lib/modules/usbcore.ko
# after that connect your USB device and type
lsusb
If there's no output from lsusb, there's nothing detected. Maybe other modules are needed.
Maybe building a kernel with this config could do something, I don't know.
All our custom kernels are built with this one instead. But after that probably we need a way to swtich mode etc... I'm not good enough for this, I don't even care about USB OTG :silly:, it's something I would never use.
dhiru already said that he will look into it, you have to wait.
loSconosciuto said:
There's nothing interesting there, I can only see the modules are loaded.
To see if USB devices are connected I'd use a busybox tool: lsubs
Code:
insmod /system/lib/modules/usbcore.ko
# after that connect your USB device and type
lsusb
If there's no output from lsusb, there's nothing detected. Maybe other modules are needed.
Maybe building a kernel with this config could do something, I don't know.
All our custom kernels are built with this one instead. But after that probably we need a way to swtich mode etc... I'm not good enough for this, I don't even care about USB OTG :silly:, it's something I would never use.
dhiru already said that he will look into it, you have to wait.
Click to expand...
Click to collapse
Thanks buddy. You have great knowledge. As compared to u I am totally a noob :silly:
Anyway I think I should wait for dhiru to wotk on usb otg
Q&A for NATIVE OTG Fix For Micromax Unite 2 Kitkat (NO NEED OTG HELPER)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Needs some work
Thanks for this AWESOME tweak but it is very BUGGY!
It only works only once per reboot and if I remove and reconnect the USB drive, it says "Unfortunately External Storage has stopped" and then "Unfortunately Settings has stopped".
Please fix this asap
It is a MUCH NEEDED tweak for the Unite 2!
EDIT : I can still access the flash drive via ES, but I can't unmount the drive as Settings force closes
Will you mind trying another usb flash drive? As i can mount/unmount as many times as i want. And also no force close.
Edit: ok i can mount/unmount it as many times as i want till the drive is connected through otg cable, once removed, can't mount again till reboot.
Thanx for telling, will look into it.
Edit 2: you can still mount/unmount drives but there will be no notification and no listing in stock file manager, but you can do normal operations using es file explorer.
Anything else, just comment.
Force closing!
Sudeep Duhoon said:
Will you mind trying another usb flash drive? As i can mount/unmount as many times as i want. And also no force close.
Edit: ok i can mount/unmount it as many times as i want till the drive is connected through otg cable, once removed, can't mount again till reboot.
Thanx for telling, will look into it.
Edit 2: you can still mount/unmount drives but there will be no notification and no listing in stock file manager, but you can do normal operations using es file explorer.
Anything else, just comment.
Click to expand...
Click to collapse
I can't unmount as clicking the Storage menu in Settings while the drive is connected, force closes Settings.
Also, File Manager too fc
Galactiko said:
I can't unmount as clicking the Storage menu in Settings while the drive is connected, force closes Settings.
Also, File Manager too fc
Click to expand...
Click to collapse
Which rom you are using and do you have es file explorer?
Updating the patch, download and try this one.
???????
do we need to restart after every use to reuse again??????????
farukhwap said:
do we need to restart after every use to reuse again??????????
Click to expand...
Click to collapse
Nope. Watch the video.
Work only once's
It work's for the first time and after than, when I remove my USB drive and again try to connect to mobile then it doesn't mount. I need to restart if i want to connect it please fix it soon and good work man thanks I appreciate ur work
[email protected] said:
It work's for the first time and after than, when I remove my USB drive and again try to connect to mobile then it doesn't mount. I need to restart if i want to connect it please fix it soon and good work man thanks I appreciate ur work
Click to expand...
Click to collapse
Watch the video.
USB Otg Not Working
Dude I have completed the process as said by you step by step but still usb otg is not working
My unite 2 ( 8 gb version) is rooted and custom recovery is installed ( ctr 2.2)
I flashed the zip u provided but still otg is not working. Why ? can u tell me
Thanks, :good:
I just logged in to thanks you for solving the otg problem., it works great.., though i had a question in mind.., in your video your theme is like android L., how you did that., by using xposed.,? or any other way., coz themer through xposed in not working in mine., and i don't know why., please share it :good:
USB Otg Not Working
Sudeep Duhoon said:
Watch the video.
Click to expand...
Click to collapse
USB Otg is not working in my unite 2 ( 8 GB rom).
I completed the method step by step as you said but still otg is not working.
You asked for logcat output. I am attaching logcat output file.
Plzzz take a look & tell me if it is possible to use otg in my phone & how?
chetan91 said:
Dude I have completed the process as said by you step by step but still usb otg is not working
My unite 2 ( 8 gb version) is rooted and custom recovery is installed ( ctr 2.2)
I flashed the zip u provided but still otg is not working. Why ? can u tell me
Click to expand...
Click to collapse
got the logcat.
sorry for late reply, it's my last semester so i have to concentrate a bit on studies.
anyway, there is no issue that i can see in the log you attached.
when you attach pen drive, can you see any notification? or anything in settings-storage?
Got no notification
Exams ya I can understand
Thats the problem I got no notifications when connecting pen-drive through otg.
Nothing in storage settings, nothing in es file explorer.
Though I saw some videos on youtube in which when user connects pendrive through otg, notification shows but why its not working in mine. My phone is rooted,custom recovery installed, flashed the patch but still nothing.Plzz help me. Yes I am on stock (kitkat) rom.
OTG showing only one time in storage?
@Sudeep Thanks(and also pressed the Thanks button ) for providing the OTG fix. Used your patch v2. successfully fixed the otg. One thing is bugging me. Why does not the system detects the OTG drive second time? Is it the android system? or some bugs in your patch or IT COULD A NEW FEATURE(Like "Hide OTG pendrive from System when you use it Second time").
If we remove the drive without un-mounting will it harm our flash Drives? I normally use the "Safely remove the USB" option.
One more thing, I used TWRP with Materialized theme, when i installed it it was showing error in red lines. There was some lines about the font. and after installing the patch when i press reboot system, the recovery turned 180 and hanged. So had to remove the battery and re-insert it.
Hope you have some free time to fix those error.
Thanks man!!!!!.... Its working on 8gb version
Say Hello
Hello
v2 is it permanent fix
As when i diconected my otg once i had to restart my mobile for again detect it in file manager.did u fix that .
Thanks., much appreciated...
Sent from my GT-N7105 using XDA Free mobile app
hi i have a different device(lenovo a6000).Can you tell me what code to add to vold file.i would like to test it with my device.
Hey guys. I have downloaded the APK of Andromeda version 18. For some reason it's not showing the dialogue box of "Disconnected". I tried using the Desktop Client and Substratum does launch after the script finishes execution.
But it somehow still can't verify whether Andromeda is running or not.
Will I have to purchase Andromeda from the play store? Or is it not compatible with my device?
Any help will be greatly appreciated. Thank You.
Krishna16 said:
Hey guys. I have downloaded the APK of Andromeda version 18. For some reason it's not showing the dialogue box of "Disconnected". I tried using the Desktop Client and Substratum does launch after the script finishes execution.
But it somehow still can't verify whether Andromeda is running or not.
Will I have to purchase Andromeda from the play store? Or is it not compatible with my device?
Any help will be greatly appreciated. Thank You.
Click to expand...
Click to collapse
Andromeda is a paid app. You need to purchase it via the Play Store.
Krishna16 said:
Hey guys. I have downloaded the APK of Andromeda version 18. For some reason it's not showing the dialogue box of "Disconnected". I tried using the Desktop Client and Substratum does launch after the script finishes execution.
But it somehow still can't verify whether Andromeda is running or not.
Will I have to purchase Andromeda from the play store? Or is it not compatible with my device?
Any help will be greatly appreciated. Thank You.
Click to expand...
Click to collapse
purchase the app dude, 75rs isnt a big thing to spare.
stop piracy ffs
Stop Piracy
Thank dev they know how to code the app with purchase verification.
Hey guys. I have purchased the app and yes it works well. Can you guys help me out as to which android version I should choose while installing my themes in substratum?? Don't want my phone to enter into a bootloop.
Krishna16 said:
Hey guys. I have purchased the app and yes it works well. Can you guys help me out as to which android version I should choose while installing my themes in substratum?? Don't want my phone to enter into a bootloop.
Click to expand...
Click to collapse
Are you in Nougat or Oreo? Check Android version by going to Settings app and go to bottom option to check.
Guys I've purchased Andromeda and when I run my windows client start_andromeda file the cmd prompt launches and it asks for any button to be pressed on doing so it ain't establishes a connection instead it shows null and crashes.so I can't connect my device (USB debugging is on!)
Can any one help me out with this please ?
Aryan4100 said:
Guys I've purchased Andromeda and when I run my windows client start_andromeda file the cmd prompt launches and it asks for any button to be pressed on doing so it ain't establishes a connection instead it shows null and crashes.so I can't connect my device (USB debugging is on!)
Can any one help me out with this please ?
Click to expand...
Click to collapse
Make sure that you have the adb drivers install properly.
rockstar_26 said:
Make sure that you have the adb drivers install properly.
Click to expand...
Click to collapse
Totally agree. Try this link.
I personnaly when i launch substratum on my pc, first launch as admin the adb file and then, the start_andromeda normally and everything is ok. Another thing : i change the settings when i connect my phone from "charge" to "transfer file". It costs me many try to make it work but finally, i did it.
Here is the two substratum modules working perfectly on my A1 :
https://play.google.com/store/apps/details?id=com.kohlewrrk.lockclean
https://play.google.com/store/apps/details?id=me.msfjarvis.substweaks
XDA talked about hem here.
If any other user has other mod compatible 100% with our A1, be nice and post it here !
Hey guys, thank you very much for your help. I really appreciate it and I must say, Substratum is pretty impressive.
HidekiRyuga said:
Thank dev they know how to code the app with purchase verification.
Click to expand...
Click to collapse
How ?? Please tell
do all substractum apps works on mia1 using andromeda?
how to distinguish?
chrztn said:
do all substractum apps works on mia1 using andromeda?
how to distinguish?
Click to expand...
Click to collapse
just try yourself, but not all works, there are some part that dont work, such as setting icon, setting mode, some status bar icon, & some other, also you need to restart the phone in order to apply the theme
but most important is this only works on 8.0 OS
card-us said:
just try yourself, but not all works, there are some part that dont work, such as setting icon, setting mode, some status bar icon, & some other, also you need to restart the phone in order to apply the theme
but most important is this only works on 8.0 OS
Click to expand...
Click to collapse
any chance of bootloop while trying different modules or is the worst that could happen is theme not applied?
chrztn said:
any chance of bootloop while trying different modules or is the worst that could happen is theme not applied?
Click to expand...
Click to collapse
just read the faq for substratum/andromeda. In short, keep auto updates off from playstore (as some apps break themes and theme update is required) and restore default theme before ota update will keep you pretty safe. Been using andromeda from jan 2018, never faced bootloops or anything of that sort.
If you don't want to purchase then you can root with #Magisk & use substratum
Hey guys, I installed the drivers from the link in one of the first posts, fire up the start_andromeda.bat from pc with phone connected, I get the CONNECTED status in the andromeda app box, go to substratum, select my preferred overlays in FLUX white and LockClean (lockclean was confirmed working in this thread), apply, then reboot. After reboot I go to the substratum manager tab, click on Chnage overlay states.... and then nothing. No theme is applied whatsoever. Any help?
ZwoeleBeer said:
Hey guys, I installed the drivers from the link in one of the first posts, fire up the start_andromeda.bat from pc with phone connected, I get the CONNECTED status in the andromeda app box, go to substratum, select my preferred overlays in FLUX white and LockClean (lockclean was confirmed working in this thread), apply, then reboot. After reboot I go to the substratum manager tab, click on Chnage overlay states.... and then nothing. No theme is applied whatsoever. Any help?
Click to expand...
Click to collapse
That's because every time you reboot your device, Andromeda gets deactivated and you need to connect to the andromeda desktop client once again to activate it. You have to repeat the same process every time you restart your device.
Krishna16 said:
That's because every time you reboot your device, Andromeda gets deactivated and you need to connect to the andromeda desktop client once again to activate it. You have to repeat the same process every time you restart your device.
Click to expand...
Click to collapse
Did that, otherwise substratum would give me a promt that it's not activated.
Hello,
Is there a way to make an android application something closer to a system application?
I need the app not to be restricted in terms of background/foreground running, notification limit, sleeping mode, or such things.
I have access to the device.
I don't know a lot of stuff about this so please feel free to ask for further clarification.
grrigore said:
Hello,
Is there a way to make an android application something closer to a system application?
I need the app not to be restricted in terms of background/foreground running, notification limit, sleeping mode, or such things.
I have access to the device.
I don't know a lot of stuff about this so please feel free to ask for further clarification.
Click to expand...
Click to collapse
If you are rooted, you can make it a system app. Please clarify if you have root privledge. Do you have ADB access?
So you want to to have max permissiom? What is your real goal? Like the root cause of why, as you may not need what you are asking for. Also, what’s the app?
Arealhooman said:
If you are rooted, you can make it a system app. Please clarify if you have root privledge. Do you have ADB access?
Click to expand...
Click to collapse
No. The device is not rooted.
Arealhooman said:
So you want to to have max permissiom? What is your real goal? Like the root cause of why, as you may not need what you are asking for. Also, what’s the app?
Click to expand...
Click to collapse
The app has some services that need to run non-stop and it needs to wake up the device every time there is a notification. I cannot tell you about the app as it is work-related, sorry.
grrigore said:
No. The device is not rooted.
The app has some services that need to run non-stop and it needs to wake up the device every time there is a notification. I cannot tell you about the app as it is work-related, sorry.
Click to expand...
Click to collapse
Ah, i have no idea how your device works, but this may help: https://dontkillmyapp.com/
Arealhooman said:
Ah, i have no idea how your device works, but this may help: https://dontkillmyapp.com/
Click to expand...
Click to collapse
I've tried some of that but the system would still put my app to sleep.
grrigore said:
I've tried some of that but the system would still put my app to sleep.
Click to expand...
Click to collapse
Can you use Adb? Did you find some switch on your device that says it will turn off optimization.
Arealhooman said:
Can you use Adb? Did you find some switch on your device that says it will turn off optimization.
Click to expand...
Click to collapse
Yes, I can use ADB. There is a setting I've just discovered and I'm going to try it, but I'm still interested in other ways.
Well… use the string
Arealhooman said:
Well… use the string
Click to expand...
Click to collapse
I will, but if you have some resources on this matter I'd like to get them.
The Adb soulition is to remove doze mode,w high is a bad idea unless your really really need it.
Arealhooman said:
The Adb soulition is to remove doze mode,w high is a bad idea unless your really really need it.
Click to expand...
Click to collapse
Why is that a bad idea? The app is supposed to work 100% of the time. I mean the device is basically just for that app.
grrigore said:
Why is that a bad idea? The app is supposed to work 100% of the time. I mean the device is basically just for that app.
Click to expand...
Click to collapse
Ah, you could try it, but it disables dose for everythin, so that battery life would take a tremendous hit. If the device is connected to a charging source all the time, it would not matter though.
Arealhooman said:
Ah, you could try it, but it disables dose for everythin, so that battery life would take a tremendous hit. If the device is connected to a charging source all the time, it would not matter though.
Click to expand...
Click to collapse
Yes it is. I know there are some tradeoffs but the 100% running time is the goal.
grrigore said:
Yes it is. I know there are some tradeoffs but the 100% running time is the goal.
Click to expand...
Click to collapse
if you’d ant, try it, but if you found a better way, use that. Do you want the Adb code?
Arealhooman said:
if you’d ant, try it, but if you found a better way, use that. Do you want the Adb code?
Click to expand...
Click to collapse
I could use some help. I don't have much experience with this. Tutorials would also help or any other resources.
Enable USB debugging, Downlaod platform tool, open powershell in platform tools folder, give pc access to device data, run “adb devices” To see if works. If that doesn’t work, try “./adb devices” or “.\ usb debugging “
Arealhooman said:
Enable USB debugging, Downlaod platform tool, open powershell in platform tools folder, give pc access to device data, run “adb devices” To see if works. If that doesn’t work, try “./adb devices” or “.\ usb debugging “
Click to expand...
Click to collapse
I was able to adb shell into it.
Does adb devices work?
Arealhooman said:
Does adb devices work?
Click to expand...
Click to collapse
Sorry I got no notification for this. Yes.
Run
Code:
adb shell dumpsys deviceidle unforce