Database Info

[GUIDE] How to update baseband/modem/bootloader

This used to be a thread on how to disable the air command pop up sound, but it wasn't really a success. So I thought let's change it into a baseband/modem/bootloader upating guide. I know there are a bunch of guides on how to do this but I keep seeing people struggle with it, so I hope this helps
First of all thanks @xda
@sammobile
@samsung
@odin
Prerequisites:
- Smartphone
- Computer
- USB cable
- Patience (it's still a virtue )
- Reading ability (some people seem to lack it nowadays )
It probably won't happen, but just in case
Disclaimer: I'm not responsible for whatever happens to your phone. I'm just providing a guide, so if you brick your device or anything, it's not my fault
Now there are two ways to do update:
1) through flashing the latest firmware
2) by grabbing the modem/baseband/bootloader separately and flashing them manually
This is why most people don't manage to properly update their baseband/modem/bootloader: when updating don't boot into download mode through the reboot menu (this will lock your baseband and therefore it won't update). You have to boot into download mode using the hard keys. To do so, press the home key + volume down + power button at the same time. Hold them until you see a screen that asks you whether or not to continue into download mode.
Method 1: flashing official firmware
When you have a fast internet connection with a big download limit, I highly recommend this method. In this way you're sure everything gets updated at once.
- Grab the latest firmware at www.sammobile.com
Go to firmware. There you search the firmware for your device by typing your model number in the search box. You can grab the firmware for your region of another one, it doesn't matter that much as long as you're sure that the devices have the same chipset (snapdragon <--> exynos). Download the desired firmware. It's the official firmware so don't worry about tripping knox (if you haven't done so already of course ).
- After the download is complete, start Odin.
For the people who don't have Odin yet, make sure you have Samsung kies installed (Link: Samsung Kies)
Download Odin (it's in the firmware description on sammobile) and install.
- Open Odin
- Put your device in download mode following the instructions in red (if you can't find them, you must be really blind! ) and connect it to your computer with an USB cable.
If Samsung kies is properly installed, the box that says 0:[COM7] (the one in the left top corner) should be blue or yellow depending on the Odin version you downloaded.
- Click on AP and add the firmware you just downloaded.
You don't have to change any of the other settings.
- Hit start
Just wait till Odin says pass. Your device will automatically reboot.
You can check your device information by going to settings and checking about device or by typing *#1234# in your dialer.
- Enjoy
Method 2: flashing everything seperately
If you're low on available download data or you should don't want to flash an entire rom, this is the method for you.
- Search for your devices baseband/modem/bootloader (you can find them here on XDA) and download what you need.
- Open Odin (for how to install/download/what you need, see method 1).
- Add your bootloader by clicking BL
- Add your modem by clicking CP
- Add your baseband by clicking AP
You don't have to change any other settings in Odin.
- Hit start
Wait for Odin to say pass, your device should automatically restart.
You can check your device information by going to settings and checking about device or by typing *#1234# in your dialer.
- Enjoy
Hope this helps you guys
PS: I will add screenshots later, gotta leave now

OTA updates|?
Sorry, noob question, after I flash my g935f with one of these official fw from sammobile, my device will be able to receive OTA updates?
Please let me know if you have information about Odin compatibility with MacOS or VmWare.

SamFirm may deserve some linking, very useful for such scenarios.
Also, Baseband and Modem are the same thing, sometimes it's even called Radio as well.

I have rom GNG1 4.4.2, can i update bootloader to PD3? What can i gain with update bootloader?

OP says
- Add your modem by clicking CP
- Add your baseband by clicking AP
Modem is baseband baseband is modem .
Why flash a modem twice and why flash it through the wrong AP ??

NEVER MIND.
Fixed by reading OP and going to download in the proper way
Hi Guys,
so I wanted to update my HLTE to latest modem.
Running CM13 Temasek builds (encrypted), I thought (before finding this thread) that I need to go back to official.
Did full backup in TWRP 3.0.2, went to download mode.
Flashed Stock with Odin (N9005XXUGBOJ1_N9005AUTGBOG1_AUT), rebooted.
Flashed TWRP from Download mode, restored backup.
I could not verify in between if it updated the modem because the (lollipop) stock could not decrypt my phone.
Still after all this my modem is at N9005XXUENB1...
Any ideas?

G930F locked on Combination firmware

Hi guys
I need a helping hand.
I have a s7 (G930F fxxu2drb6) with frp lock.
It did not work either realterm, bluetooth, or downgrade (SW REV CHECK FAIL DEVICE 2, BINARY 1 SAMSUNG).
On gsm-hosting they suggested to me to flash the combination file "COMBINATION_FA60_G930FXXU2ARA2_CL7964511_QB165812 9 6_REV00_user_mid_noship.tar.md5".
After the flash I can not yet downgrade (W REV CHECK FAIL DEVICE 2, BINARY 1 SAMSUNG), not even flash again "fxxu2drb6" (FAIL RQT_close).
Can someone help me get out of this situation?
Thank you in advance

marcoar said:
Hi guys
I need a helping hand.
I have a s7 (G930F fxxu2drb6) with frp lock.
It did not work either realterm, bluetooth, or downgrade (SW REV CHECK FAIL DEVICE 2, BINARY 1 SAMSUNG).
On gsm-hosting they suggested to me to flash the combination file "COMBINATION_FA60_G930FXXU2ARA2_CL7964511_QB165812 9 6_REV00_user_mid_noship.tar.md5".
After the flash I can not yet downgrade (W REV CHECK FAIL DEVICE 2, BINARY 1 SAMSUNG), not even flash again "fxxu2drb6" (FAIL RQT_close).
Can someone help me get out of this situation?
Thank you in advance
Click to expand...
Click to collapse
Try to connect with smart switch.
On windows pc or laptop
Sent from my [device_name] using XDA-Developers Legacy app
---------- Post added at 11:21 PM ---------- Previous post was at 11:20 PM ----------
marcoar said:
Hi guys
I need a helping hand.
I have a s7 (G930F fxxu2drb6) with frp lock.
It did not work either realterm, bluetooth, or downgrade (SW REV CHECK FAIL DEVICE 2, BINARY 1 SAMSUNG).
On gsm-hosting they suggested to me to flash the combination file "COMBINATION_FA60_G930FXXU2ARA2_CL7964511_QB165812 9 6_REV00_user_mid_noship.tar.md5".
After the flash I can not yet downgrade (W REV CHECK FAIL DEVICE 2, BINARY 1 SAMSUNG), not even flash again "fxxu2drb6" (FAIL RQT_close).
Can someone help me get out of this situation?
Thank you in advance
Click to expand...
Click to collapse
It will flash stock firmware and solve all binary problem
Sent from my [device_name] using XDA-Developers Legacy app
---------- Post added at 11:22 PM ---------- Previous post was at 11:21 PM ----------
marcoar said:
Hi guys
I need a helping hand.
I have a s7 (G930F fxxu2drb6) with frp lock.
It did not work either realterm, bluetooth, or downgrade (SW REV CHECK FAIL DEVICE 2, BINARY 1 SAMSUNG).
On gsm-hosting they suggested to me to flash the combination file "COMBINATION_FA60_G930FXXU2ARA2_CL7964511_QB165812 9 6_REV00_user_mid_noship.tar.md5".
After the flash I can not yet downgrade (W REV CHECK FAIL DEVICE 2, BINARY 1 SAMSUNG), not even flash again "fxxu2drb6" (FAIL RQT_close).
Can someone help me get out of this situation?
Thank you in advance
Click to expand...
Click to collapse
Intall smart connect or smart switch in pc
Sent from my [device_name] using XDA-Developers Legacy app

marcoar said:
Hi guys
I need a helping hand.
I have a s7 (G930F fxxu2drb6) with frp lock.
It did not work either realterm, bluetooth, or downgrade (SW REV CHECK FAIL DEVICE 2, BINARY 1 SAMSUNG).
On gsm-hosting they suggested to me to flash the combination file "COMBINATION_FA60_G930FXXU2ARA2_CL7964511_QB165812 9 6_REV00_user_mid_noship.tar.md5".
After the flash I can not yet downgrade (W REV CHECK FAIL DEVICE 2, BINARY 1 SAMSUNG), not even flash again "fxxu2drb6" (FAIL RQT_close).
Can someone help me get out of this situation?
Thank you in advance
Click to expand...
Click to collapse
Flash latest stock firmware for your region and enable OEM unlock in developer settings to avoid FRP in future. Also try to remember your google account password :silly:

Solved. I flash the latest firmware with an old version of odin

frp lock
marcoar said:
Solved. I flash the latest firmware with an old version of odin
Click to expand...
Click to collapse
Hi ! Which version of odin did you use ? Marcoar
And which version of android do you have before the flash ?

kira31390 said:
Hi ! Which version of odin did you use ? Marcoar
And which version of android do you have before the flash ?
Click to expand...
Click to collapse
Odin 3.12.5
Firmware: fxxu2drb6

marcoar said:
Hi guys
I need a helping hand.
I have a s7 (G930F fxxu2drb6) with frp lock.
It did not work either realterm, bluetooth, or downgrade (SW REV CHECK FAIL DEVICE 2, BINARY 1 SAMSUNG).
On gsm-hosting they suggested to me to flash the combination file "COMBINATION_FA60_G930FXXU2ARA2_CL7964511_QB165812 9 6_REV00_user_mid_noship.tar.md5".
After the flash I can not yet downgrade (W REV CHECK FAIL DEVICE 2, BINARY 1 SAMSUNG), not even flash again "fxxu2drb6" (FAIL RQT_close).
Can someone help me get out of this situation?
Thank you in advance
Click to expand...
Click to collapse
Hi there
When you flashed the combination rom you described did it actually boot into the factory binary ?
Im just curious as i have the same combination rom though my firmware is G930FXXU2DRBE and when i flash the binary with odin it will turn on but wont boot past the samsung S7 screen rhough the blue light comes on and pulsates though this is all it does i was just wonderng if yours did the same.
Thanks

Matty1993 said:
Hi there
When you flashed the combination rom you described did it actually boot into the factory binary ?
Im just curious as i have the same combination rom though my firmware is G930FXXU2DRBE and when i flash the binary with odin it will turn on but wont boot past the samsung S7 screen rhough the blue light comes on and pulsates though this is all it does i was just wonderng if yours did the same.
Thanks
Click to expand...
Click to collapse
after the combination file flash, the phone normally starts with the combination firmware

marcoar said:
after the combination file flash, the phone normally starts with the combination firmware
Click to expand...
Click to collapse
Thanks so much for the reply i appreciate it i might try my combination file with the G930FXXU2DRB6 firmware you used as i need to test my hardware and fix imei but cant get the factory binary to boot on G930FXXU2DRBE firmware my thinking that it wouldnt boot was as its FA60 is android 6.0 MM where as my U2DRBE firmware is FA70 7.0 nougat is your device nougat or marshmallow ? Just trying to work out whats going wrong where for it to not boot on my device as ive lost my imei number flashing a custom rom and dont have access to my TWRP back up for another 3 weeks
Thanks

Hello. I have a similar problem. I have the latest firmware on it: G930FXXS2DRDI There are no ways to lift the Google lock. I have tried everything possible: Bluetooth does not work, Talkback, Realterm, etc. Please for help
My Android Version is: 7.0 (Nougat)

Frp g930fxxu2ara1
Hello my friend, i have this problem too. Have you a fix? this security patch for FRP is incredible....

You CAN bypass FRP on later Samsung models using Combination FW. I have succsesfully done this with S8+/G955F, it should work with any device that has compatible Stock/Combinaton FW.. Here are the steps. Download a compatible STOCK ROM, and some similar COMBINATION FW (by similar i mean both FW to be with the same binary and same android version, duh..) Here are some firmware download links, but you can use whatever you want, according to your device.. G930F STOCK ROM/G930F Combination FW
First, using Odin flash the COMBINATION FW to your phone. After flashing is complete and the phone reboots, allow a few minutes for the phone to boot. If it doesn't boot/gets stuck at bootlogo, reboot/boot to recovery and wipe data/cache, and reboot again. MOST IMPORTANT THING! After the phone boots, go to Settings, enable Developer Options if not enabled, enable USB Debugging, and turn the device OFF using Power button. After the device shuts down, enter Download mode, open Odin, place all 4 files in their respective fields (BL,AP,CP,CSC), and here is the SECOND MOST IMPORTANT THING! In the CSC field place the CSC file that starts with HOME/HOME_CSC (There will/should be 2 different CSC files in the FW archive, one starting with CSC, and the other with HOME_CSC). After flashing is complete, allow the phone to boot normally (don't do anything, don't enter recovery/wipe data). If you followed my instructions correctly, after the phone boots, you should be able to finish the initial setup/skip all steps, without requiring any account. Then go to Settings, enable Developer Options, turn OEM Unlock ON, and finally factory reset the device to complete the process and start fresh.
Don't forget to hit THANKS button if this method worked fo you!

ATRAC3, do you have the combination files and firmware for the SAMSUNG S7 SM-G930FD please and thank you for your wonderful tutorial here.

my odin(tried on v3.12.5/v3.12.7/v3.13.1 ) keep failing while flashing HOME_CSC but will success with CSC, and still required to login google account, what is the issue here ? (are we supposed to insert the pit file by ATRAC3 ? )
flashing at the lastest FW G930FXXS2DRCE
phone version:SM-G930F

ATRAC3 said:
You CAN bypass FRP on later Samsung models using Combination FW. I have succsesfully done this with S8+/G955F, it should work with any device that has compatible Stock/Combinaton FW.. Here are the steps. Download a compatible STOCK ROM, and some similar COMBINATION FW (by similar i mean both FW to be with the same binary and same android version, duh..) Here are some firmware download links, but you can use whatever you want, according to your device.. G930F STOCK ROM/G930F Combination FW
First, using Odin flash the COMBINATION FW to your phone. After flashing is complete and the phone reboots, allow a few minutes for the phone to boot. If it doesn't boot/gets stuck at bootlogo, reboot/boot to recovery and wipe data/cache, and reboot again. MOST IMPORTANT THING! After the phone boots, go to Settings, enable Developer Options if not enabled, enable USB Debugging, and turn the device OFF using Power button. After the device shuts down, enter Download mode, open Odin, place all 4 files in their respective fields (BL,AP,CP,CSC), and here is the SECOND MOST IMPORTANT THING! In the CSC field place the CSC file that starts with HOME/HOME_CSC (There will/should be 2 different CSC files in the FW archive, one starting with CSC, and the other with HOME_CSC). After flashing is complete, allow the phone to boot normally (don't do anything, don't enter recovery/wipe data). If you followed my instructions correctly, after the phone boots, you should be able to finish the initial setup/skip all steps, without requiring any account. Then go to Settings, enable Developer Options, turn OEM Unlock ON, and finally factory reset the device to complete the process and start fresh.
Don't forget to hit THANKS button if this method worked fo you!
Click to expand...
Click to collapse
Hi mate ive used the G930FXXU2DRBE XSA Firmware and also G930FXXU2DRB6 firmware with the G930FXXU2ARA2 combination rom however it will not boot past the samsung logo the nad passes and is provisioned in top left corner and when plugged into the computer comes online with ADB bypass flasher but it just sits there even if i do a cache wipe and factory reset it comes up with a tango console error or something like that when reset then reboots back to samsung logo and when re installing firmware HOME-CSC will fail every time the only thing ive been able to put it down to is that (1) the firmware is FA_70 which is nougat OS and the combination rom is FA_60 MM or (2) my knox warranty bit is tripped and will not allow a samsung factory binary to be run on it, may i ask what would be the difference with the firmware you have listed to the firmware im already using with the combination rom ? Need to sort my imei number out with the factory nad asap dont have access to my TWRP backup for another week and a half, if it helps my device is not FRP locked and is oem unlocked.
Thanks
Matthew
P.S to all those whom have a bit 2 bootloader on S7 all the loopholes have been patched the only way is to use the combination files ive been through absolutely everything and tried everything this new bootloader update is impenetrable i can google unlock samsung S8 and S9 no dramas and with S9 the OEM lock option dissapears for a week if tampered with but still 15 minutes and its done this **** but got me goin loco holmes !!!!! Maybe they figured this out also as there is only bit 1 bootloaders for both the S8 and the S9 however with S8 i found a stock firmware that allows another way to unlock the device without the need to flash any combination rom.

So in short no hope now to unbrick our Samsung S7 SM-G930F/FD or what.....?

LEVY P said:
So in short no hope now to unbrick our Samsung S7 SM-G930F/FD or what.....?
Click to expand...
Click to collapse
If it gets stuck on the console error and wont reboot to download mode then hold the power button volume down button and power button for 40 seconds and it will re boot to download mode for stock firmware re installation in short basically no theres way to remove the FRP unless you can get the combination rom to boot which from what ive seen some will boot the binary but then it also depends if HOME_CSC will flash to keep usb debugging enabled to use adb bypass program im now using the new G930FXXU2ERE2 8.0 OREO so I've given up on the binary 2 nougat FRP unlocking for now might be best to wait a while for someone to receive a factory binary on the nougat or oreo when sent off and returned so it can be dumped and built into a flashable rom until then not much can be done and i may have to wait another week and a half for my EFS backup :'(

We will be waiting from u for the new combination file when out bro, our hope are hinged on u!

No one is coming up with any method about the bootloader binary 2 for the Samsung S7 G930FD...?
Sent from my SM-G930F using Xposed Modules

FRP can be done so easy from any GSM tool by combination, anyone need it it will be my pleasure to help

Problem with TWRP Recovery v3.1.1 on my Samsung SM-j701M

Hello there
I bought a Samsung J7 Neo (SM -J701M) on another country than mine (Im from Argentina, device bought on Paraguay). Anyway, I started to look another way to get some space on the internal storage and I remember that android had an option to expand it, using a SD Card. Unfortunately, i realize this option is not allowed on samsungs device, but it works (i read it, because can't do it) if you get root user.
So I looked how to do it and i found a group of files
ODIN v3.12
Magisk v.14.5
twrp v.3.1.1 -j7 neo
Im not sure if I downloaded the right files, but im start the process anyway.
I followed point by point
First I installed TWRP Recovery v3.1.1 (which is supposed to be correct to my model) and then already on twrp rom I installed magisk 14.5 from sd card and did wipe data.
Turned on the phone and I restored all apps from a google backups, and I realized I cant find app "Magisk" on the device, so I decided to reboot the phone and it starts to do a bootloop with this error "kernel rev. check fail, device:2 binary:1"
At this point, I failed every attempt to fix this error
I tried installing the last official firmware that i found (and Im not sure if its the correct one)
J701MUBU3ARC2_J701MUWT3ARC1_UFN
And I got this error
"SW REV. CHECK Fail (BOOTLOADER) Device :5 Binary 3:
I searched on google this kind of error, and I found that I have to downgrade the bootloader. And this is why im here beacause I dont know how to do this, and if its works, i don´t know how to continue the process to root and expand my internal storage. So I really appreciate if someone one could help me with this. I can learn fast and I love to do this things by myself.
Thanks for your time!
Fernando

If you have to downgrade the boot loader, it means the firmware you are flashing is older than the one on your fon.
Go to www.updato.com and look for the he latest J701M firmware.
You can sort the list by date and by region.
And the site is download manager friendly ?
Good luck!
Sent from my SM-J700F using Tapatalk

Thanks for your answer! One more question about the region. Should I download firmware from the country that I bought the phone or firmware from the country that I am?

Look for your country specific firmware first.
Otherwise Samsung usually has regional software - i.e for several countries in a region e.g. Argentina, Paraguay.
Sent from my SM-J700F using Tapatalk

MikeEinziger said:
Hello there
I bought a Samsung J7 Neo (SM -J701M) on another country than mine (Im from Argentina, device bought on Paraguay). Anyway, I started to look another way to get some space on the internal storage and I remember that android had an option to expand it, using a SD Card. Unfortunately, i realize this option is not allowed on samsungs device, but it works (i read it, because can't do it) if you get root user.
So I looked how to do it and i found a group of files
ODIN v3.12
Magisk v.14.5
twrp v.3.1.1 -j7 neo
Im not sure if I downloaded the right files, but im start the process anyway.
I followed point by point
First I installed TWRP Recovery v3.1.1 (which is supposed to be correct to my model) and then already on twrp rom I installed magisk 14.5 from sd card and did wipe data.
Turned on the phone and I restored all apps from a google backups, and I realized I cant find app "Magisk" on the device, so I decided to reboot the phone and it starts to do a bootloop with this error "kernel rev. check fail, device:2 binary:1"
At this point, I failed every attempt to fix this error
I tried installing the last official firmware that i found (and Im not sure if its the correct one)
J701MUBU3ARC2_J701MUWT3ARC1_UFN
And I got this error
"SW REV. CHECK Fail (BOOTLOADER) Device :5 Binary 3:
I searched on google this kind of error, and I found that I have to downgrade the bootloader. And this is why im here beacause I dont know how to do this, and if its works, i don´t know how to continue the process to root and expand my internal storage. So I really appreciate if someone one could help me with this. I can learn fast and I love to do this things by myself.
Thanks for your time!
Fernando
Click to expand...
Click to collapse
@MikeEinziger
Hi There,
Did you have any luck with your Phone? I have the same exact model but I have Android Version 8.1.0, Samsung Experience version 9.5; Android security patch level -Feb 1, 2019; Baseband version: J701MUBS6BSB3 and like you, I love doing things myself, and I can't seem to abide a smartphone that's not rooted.
I'm not exactly a newbie, I've been assisting devs with testing and such on AT&T SGS3 for quite some time. But I can't seem to find a stable method for rooting for this phone, no one seems to be doing any development on it.
I would love to hear your story thus far.

im needing help myself, i have the SM-J701M (J7 NEO), with android pie 9 official, but the binary is 7 (because Argentina Geniuses of course) and of all the things i tried nothing works, and the only thing they did was brick the phone, so i flash and stock firmnware to be usable again

Ezeka93 said:
im needing help myself, i have the SM-J701M (J7 NEO), with android pie 9 official, but the binary is 7 (because Argentina Geniuses of course) and of all the things i tried nothing works, and the only thing they did was brick the phone, so i flash and stock firmnware to be usable again
Click to expand...
Click to collapse
What have you done? I saw your messages on TG but everyone ignores usually, I had another problem and footbed the solution myself as I got ignored for days.
So, what have you done? Maybe we can figure it out a way to root it, but to avoid telling you things that you may have already done it is better if you let us know your already followed steps.

Jemec26 said:
What have you done? I saw your messages on TG but everyone ignores usually, I had another problem and footbed the solution myself as I got ignored for days.
So, what have you done? Maybe we can figure it out a way to root it, but to avoid telling you things that you may have already done it is better if you let us know your already followed steps.
Click to expand...
Click to collapse
i tried flashing TWRP like a guide said (Latest version) but then got stuck with a boot loop in the Samsung Galaxy Logo, then when i enter to flash the latest global firmware it didn't work because it was binary 6, so i searched for the version in Argentina that has binary 7, after that i didn't try anything else in fears of getting fully bricked, i was thinking of the magisk canary way of rooting (patching the AP) but i don't know what happen if it fails the flash

Hi, i have the same device, SM-J701M, but when i try to flash the stock, it says that the device binary is 9 and the rom is 8, but i cant find the binary 9 rom in any place, only 8. I have the trwp installed, so I was thinking if I format all data (system and files) and try to flash again, it will work ?
Also im from Brazil (SM-J701MT), and the device was buyed in Paraguay (SM-J701M) too. Should i install the SM-J701MT ROM right ?

Some success.
iKmaster01 said:
Hi, i have the same device, SM-J701M, but when i try to flash the stock, it says that the device binary is 9 and the rom is 8, but i cant find the binary 9 rom in any place, only 8. I have the trwp installed, so I was thinking if I format all data (system and files) and try to flash again, it will work ?
Also I'm from Brazil (SM-J701MT), and the device was buyed in Paraguay (SM-J701M) too. Should i install the SM-J701MT ROM right ?
Click to expand...
Click to collapse
Ok, guys, I've had a bit of progress with my device Samsung Galaxy J 7 Neo (SM-J701M- Android version 8.01)
On this phone, the option to unlock the bootloader was missing in Dev Opt and I knew that in order to achieve anything I was going to have to unlock the bootloader.
I searched and found that, via adb/fastboot (Google's Platform Tools) rebooting the phone to the bootloader you could enter the code: 'fastboot oem unlock' or 'fastboot flashing unlock' and voila! everything would be fixed...But...my device wasn't even being recognized by "fastboot" ! adb yes but no fastboot! Always the message: "Waiting on any device". Trying to find and install the drivers to do this was next to impossible.
It actually caused me soft brick my device. However, it was a blessing in disguise; I knew what had to be done, I was going to have to reinstall the firmware via Odin. I searched the site (Sammobile - you'll have to create an account.) and found the Oreo and the Pie Firmware, I downloaded both but played it safe and restored my device with the Oreo first.
And lo and behold the option to unlock bootloader was there! No hesitation, clicked that sucker fast!!
Now, I'm running PIE (No one has done a Custom ROM for this baby just yet) and with the unofficial TWRP in the first link below, it's a bit buggy but until they make an official one for us ... I guess we'll have to wait.
Oh! And don't forget to make a backup with Smart Switch!
And pay attention to the advice here:
Code:
1. Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
2. Add each file to its respective field in Odin v3.14.4. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
3. Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP then USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Option 6 (Note10) POWER + VOLUME UP
4. Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
5. Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC
These are some of the links I found helpful:
https://unofficialtwrp.com/root-twrp-galaxy-j7-neo-sm-j701m/
https://www.androidexplained.com/galaxy-note-9-restore-firmware/
https://forum.xda-developers.com/galaxy-j7/samsung-galaxy-j7-prime--j7-on-nxt-exynos7870/recovery-twrp-3-2-0-galaxy-j7-prime-t3716355
---------- Post added at 01:39 PM ---------- Previous post was at 01:30 PM ----------
iKmaster01 said:
Hi, i have the same device, SM-J701M, but when i try to flash the stock, it says that the device binary is 9 and the rom is 8, but i cant find the binary 9 rom in any place, only 8. I have the trwp installed, so I was thinking if I format all data (system and files) and try to flash again, it will work ?
Also im from Brazil (SM-J701MT), and the device was buyed in Paraguay (SM-J701M) too. Should i install the SM-J701MT ROM right ?
Click to expand...
Click to collapse
I think that's because you have to be specific with the carrier; Orange; Nextel; Movistar...that makes a lot of difference in with the firmware. If you can, check to see what you had before and try that first.

CoperaN said:
Ok, guys, I've had a bit of progress with my device Samsung Galaxy J 7 Neo (SM-J701M- Android version 8.01)
On this phone, the option to unlock the bootloader was missing in Dev Opt and I knew that in order to achieve anything I was going to have to unlock the bootloader.
I searched and found that, via adb/fastboot (Google's Platform Tools) rebooting the phone to the bootloader you could enter the code: 'fastboot oem unlock' or 'fastboot flashing unlock' and voila! everything would be fixed...But...my device wasn't even being recognized by "fastboot" ! adb yes but no fastboot! Always the message: "Waiting on any device". Trying to find and install the drivers to do this was next to impossible.
It actually caused me soft brick my device. However, it was a blessing in disguise; I knew what had to be done, I was going to have to reinstall the firmware via Odin. I searched the site (Sammobile - you'll have to create an account.) and found the Oreo and the Pie Firmware, I downloaded both but played it safe and restored my device with the Oreo first.
And lo and behold the option to unlock bootloader was there! No hesitation, clicked that sucker fast!!
Now, I'm running PIE (No one has done a Custom ROM for this baby just yet) and with the unofficial TWRP in the first link below, it's a bit buggy but until they make an official one for us ... I guess we'll have to wait.
Oh! And don't forget to make a backup with Smart Switch!
And pay attention to the advice here:
Code:
1. Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
2. Add each file to its respective field in Odin v3.14.4. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
3. Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP then USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Option 6 (Note10) POWER + VOLUME UP
4. Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
5. Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC
These are some of the links I found helpful:
https://unofficialtwrp.com/root-twrp-galaxy-j7-neo-sm-j701m/
https://www.androidexplained.com/galaxy-note-9-restore-firmware/
https://forum.xda-developers.com/galaxy-j7/samsung-galaxy-j7-prime--j7-on-nxt-exynos7870/recovery-twrp-3-2-0-galaxy-j7-prime-t3716355
---------- Post added at 01:39 PM ---------- Previous post was at 01:30 PM ----------
I think that's because you have to be specific with the carrier; Orange; Nextel; Movistar...that makes a lot of difference in with the firmware. If you can, check to see what you had before and try that first.
Click to expand...
Click to collapse
Hey, I noticed we have the same android version and and phone model, I wanted to know which version of Twrp you used . I am guessing version 3.1.1?

It's an Un-official version of TWRP, so the version #( 3.2.1-0) may not count, you can check the links out to get more information.

hola tengo un problema, tengo un sm-j701m binario 11 android 9 y quiero intalarle un twrp pero no se cual descargar y que funcione

Don't know if anyone's still following this thread or even still has this phone but there's been quite some progress with this device. (i.e: SM-J701M) The posts below will certainly help to bring your device up to date re: rooting; flashing etc.
https://forum.xda-developers.com/t/...or-galaxy-j7-nxt-neo-core-10-08-2021.4222703/
https://forum.xda-developers.com/t/...laxy-j7-nxt-neo-core-j701-02-02-2021.4227921/
These posts contain links to ROMS and recoveries which have been sucessful, I can personally attest to this, my device was rooted and a custom ROM installed. I hope you will find them helpful.
Good Luck

[Resolved] #Solved# Any Possible Solution to Downgrade Back to Nougat?

Hello all
Been a member here for some time now and have a perplexing issue.
I upgraded a Samsung Device SM T395 to OS Pie 9 and decided I didn't like it. (There are no other posts with help on this matter)
I kept the STOCK roms Nougat 7.1 and Oreo 8 and want to put Nougat 7.1 back on my device , but is proving difficult using ODIN 13.3.1 or any other version of Odin. The result is FAIL, that's using a combination of AP, CSC, CP and BL.
I managed to get Oreo 8 back on it, but want Nougat 7.1 original installed instead.
Can anyone tell me can ADB Fastboot be used to Flash a Stock Rom back on a Samsung Device or is Odin the only method?
I know there are other similar programs like QFIL and Qualcomm that I have used for the Mi Max brand devices.
The device was rooted with Nougat 7.1 originally and I have USB debug set and FRP / OEM lock off also. So there's no problem there.
The last resort (stupidly expensive idea :crying is for me to buy another exact device that has Nougat 7 installed when boxed up!
I don't see how upgrading to Pie 9 and then wanting to go back to the original factory installed rom is a big problem, can anyone explain?
Would a CUSTOM Nougat 7.1 rom work if installed via TWRP ?
I have also come across this COMBINATION Software https://samsungcombinationfile.com/samsung-sm-t395 that is supposed to allow the downgrading of Android software, but hasn't worked as I had been lead to believe.
https://combinationfirmware.com/combination-samsung-galaxy-tab-active/
Thanks for reading :good:

tsam19 said:
Hello all
Been a member here for some time now and have a perplexing issue.
I upgraded a Samsung Device SM T395 to OS Pie 9 and decided I didn't like it. (There are no other posts with help on this matter)
I kept the STOCK roms Nougat 7.1 and Oreo 8 and want to put Nougat 7.1 back on my device , but is proving difficult using ODIN 13.3.1 or any other version of Odin. The result is FAIL, that's using a combination of AP, CSC, CP and BL.
I managed to get Oreo 8 back on it, but want Nougat 7.1 original installed instead.
Can anyone tell me can ADB Fastboot be used to Flash a Stock Rom back on a Samsung Device or is Odin the only method?
I know there are other similar programs like QFIL and Qualcomm that I have used for the Mi Max brand devices.
The device was rooted with Nougat 7.1 originally and I have USB debug set and FRP / OEM lock off also. So there's no problem there.
The last resort (stupidly expensive idea :crying is for me to buy another exact device that has Nougat 7 installed when boxed up!
I don't see how upgrading to Pie 9 and then wanting to go back to the original factory installed rom is a big problem, can anyone explain?
Would a CUSTOM Nougat 7.1 rom work if installed via TWRP ?
I have also come across this COMBINATION Softwarehttps://samsungcombinationfile.com/samsung-sm-t395 that is supposed to allow the downgrading of Android software, but hasn't worked as I had been lead to believe.
https://combinationfirmware.com/combination-samsung-galaxy-tab-active/
Thanks for reading :good:
Click to expand...
Click to collapse
Samsung firmwares can not be downgraded. This is due to your bootloader version number. The bootloader version is the 5th number from the right of the firmware being downloaded. You can also check in setting - about phone - software info - baseband version ( 5th number from right). You can also tell bootloader number in download (Odin) mode with a line saying AP SWREV B:? : K? : S?. The B is your bootloader number.
Combination firmware works on the same principle in regards to bootloader numbers.
You can only flash the same or higher bootloaders version numbers.
Custom roms will work as long as the bootloader version number is the same ( or higher ) than what is on you phone.

spawnlives said:
Samsung firmwares can not be downgraded. This is due to your bootloader version number. The bootloader version is the 5th number from the right of the firmware being downloaded. You can also check in setting - about phone - software info - baseband version ( 5th number from right). You can also tell bootloader number in download (Odin) mode with a line saying AP SWREV B:? : K? : S?. The B is your bootloader number.
Combination firmware works on the same principle in regards to bootloader numbers.
You can only flash the same or higher bootloaders version numbers.
Custom roms will work as long as the bootloader version number is the same ( or higher ) than what is on you phone.
Click to expand...
Click to collapse
RE: spawnlives. Many thanks for clearing that up, I now understand. Like many other people I have been trying to mix and match BL files from different OS variants to try and trick the device into accepting the main Nougat AP file via Odin, but nothing works.
These NEW combination files suggest that it is possible to downgrade the BOOTLOADER files on certain devices. However I downloaded all that was available for my device and tried the lot and found the only ROM that would flash correctly and properly was the latest one with the Binary 4 Bootloader. The rest would not register in Odin due to MD5 binary error messages.
In download mode my device AP SWREV B:4 K:2 S:2. ( So I have binary 4 which was released in January 2019, I believe). and this must have been updated when I updated to OS 9 Pie , using all the AP, CSC , BL and CP files.
So as you say, the answer is either , look for a Nougat 7.1 rom with a BL file that has a BINARY 4 code. Or buy another device that has the original Nougat 7.1 installed, which is silly really. :laugh:
Thanks :good:

tsam19 said:
spawnlives said:
RE: spawnlives. Many thanks for clearing that up, I now understand. Like many other people I have been trying to mix and match BL files from different OS variants to try and trick the device into accepting the main Nougat AP file via Odin, but nothing works.
These NEW combination files suggest that it is possible to downgrade the BOOTLOADER files on certain devices. However I downloaded all that was available for my device and tried the lot and found the only ROM that would flash correctly and properly was the latest one with the Binary 4 Bootloader. The rest would not register in Odin due to MD5 binary error messages.
In download mode my device AP SWREV B:4 K:2 S:2. ( So I have binary 4 which was released in January 2019, I believe). and this must have been updated when I updated to OS 9 Pie , using all the AP, CSC , BL and CP files.
So as you say, the answer is either , look for a Nougat 7.1 rom with a BL file that has a BINARY 4 code. Or buy another device that has the original Nougat 7.1 installed, which is silly really. :laugh:
Thanks :good:[/
The best you can do is roll back to Oreo. A new phone running nougat would be the best choice. I don't use custom roms but they all seem to keep up to the latest version. I have not seen one that ( latest version ) that is nougat favoured.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

spawnlives said:
tsam19 said:
spawnlives said:
RE: spawnlives. Many thanks for clearing that up, I now understand. Like many other people I have been trying to mix and match BL files from different OS variants to try and trick the device into accepting the main Nougat AP file via Odin, but nothing works.
These NEW combination files suggest that it is possible to downgrade the BOOTLOADER files on certain devices. However I downloaded all that was available for my device and tried the lot and found the only ROM that would flash correctly and properly was the latest one with the Binary 4 Bootloader. The rest would not register in Odin due to MD5 binary error messages.
In download mode my device AP SWREV B:4 K:2 S:2. ( So I have binary 4 which was released in January 2019, I believe). and this must have been updated when I updated to OS 9 Pie , using all the AP, CSC , BL and CP files.
So as you say, the answer is either , look for a Nougat 7.1 rom with a BL file that has a BINARY 4 code. Or buy another device that has the original Nougat 7.1 installed, which is silly really. :laugh:
Thanks :good:[/
The best you can do is roll back to Oreo. A new phone running nougat would be the best choice. I don't use custom roms but they all seem to keep up to the latest version. I have not seen one that ( latest version ) that is nougat favoured.
Click to expand...
Click to collapse
RE:spawnlives
Yes having researched the total list of softwares for the SM-T395 device, it seems the BL was updated to 4 on the 2nd roll out of Oreo 8.1. And having checked ALL stock Nougat variants, there was never any release of 7.1 with a bootloader binary 4!
I presume the BL Binary version is the 5 character from the right on the picture. (underlined red) :good:
It would make sense for Samsung to give the end user a choice what software they want, by keeping the BL version the same or giving a choice of BL selections to allow upgrade or downgrade.
Anyway, I rolled back to Oreo 8.1 with the binary 4 BL. And unfortunately there aren't many CUSTOM roms , nor a working TWRP for the Samsung Galaxy Active Tab2.
Thanks again :good:
Click to expand...
Click to collapse
Click to expand...
Click to collapse

tsam19 said:
spawnlives said:
tsam19 said:
RE:spawnlives
Yes having researched the total list of softwares for the SM-T395 device, it seems the BL was updated to 4 on the 2nd roll out of Oreo 8.1. And having checked ALL stock Nougat variants, there was never any release of 7.1 with a bootloader binary 4!
I presume the BL Binary version is the 5 character from the right on the picture. (underlined red) :good:
It would make sense for Samsung to give the end user a choice what software they want, by keeping the BL version the same or giving a choice of BL selections to allow upgrade or downgrade.
Anyway, I rolled back to Oreo 8.1 with the binary 4 BL. And unfortunately there aren't many CUSTOM roms , nor a working TWRP for the Samsung Galaxy Active Tab2.
Thanks again :good:
Click to expand...
Click to collapse
Yes the bootloader is 5th from the right.
I don't own a tab2. If no work twrp can be found and you want to at least have root try using magisk and used the patch root method.
Also to avoid possible upgrade turn off automatic updates in setting - software update as well as in developer option - auto update system.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

spawnlives said:
tsam19 said:
spawnlives said:
Yes the bootloader is 5th from the right.
I don't own a tab2. If no work twrp can be found and you want to at least have root try using magisk and used the patch root method.
Also to avoid possible upgrade turn off automatic updates in setting - software update as well as in developer option - auto update system.
Click to expand...
Click to collapse
Have rooted the device no problem with magisk and patching the original boot img file. Then flashing patched boot img via odin. Causing device verification to need to reformat the device, resulting in correct root.
Once a device , this device is rooted, no official updates can be installed anyway. When you try to uodate software, a pop up shows as the device recognises the software has been modified.
As for TWRP there ISN'T any version of TWRP available for the Samsung Galaxy Active Tab2 (SM-T395). I have even emailed the makers , developers of TWRP why there isn't one in their device inventory list on their webpage.
So no TWRP, and NO custom roms either for this model.
My concern , was all about finding a valid , safe way to downgrade back to original Nougat 7.1. And until someone can produce a working image with a BL with binary 4. Then there's only one optiin and that is to buy another untampered device with Nougat 7.1 out of the box and leave it un updated. :good:
Thanks for replying.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

tsam19 said:
Hello all
Been a member here for some time now and have a perplexing issue.
I upgraded a Samsung Device SM T395 to OS Pie 9 and decided I didn't like it. (There are no other posts with help on this matter)
I kept the STOCK roms Nougat 7.1 and Oreo 8 and want to put Nougat 7.1 back on my device , but is proving difficult using ODIN 13.3.1 or any other version of Odin. The result is FAIL, that's using a combination of AP, CSC, CP and BL.
I managed to get Oreo 8 back on it, but want Nougat 7.1 original installed instead.
Can anyone tell me can ADB Fastboot be used to Flash a Stock Rom back on a Samsung Device or is Odin the only method?
I know there are other similar programs like QFIL and Qualcomm that I have used for the Mi Max brand devices.
The device was rooted with Nougat 7.1 originally and I have USB debug set and FRP / OEM lock off also. So there's no problem there.
The last resort (stupidly expensive idea :crying is for me to buy another exact device that has Nougat 7 installed when boxed up!
I don't see how upgrading to Pie 9 and then wanting to go back to the original factory installed rom is a big problem, can anyone explain?
Would a CUSTOM Nougat 7.1 rom work if installed via TWRP ?
I have also come across this COMBINATION Software https://samsungcombinationfile.com/samsung-sm-t395 that is supposed to allow the downgrading of Android software, but hasn't worked as I had been lead to believe.
https://combinationfirmware.com/combination-samsung-galaxy-tab-active/
Thanks for reading :good:
Click to expand...
Click to collapse
To answer your question of how is downgrading such a big problem, it is due to security reasons, to keep your device as secure as possible with the newest available software and the latest security updates.
Sent from my SM-S767VL using Tapatalk

How to really downgrade Galaxy S6 SM-G920F firmware from 7.0 to 5.0.2/5.1.1/6.0.1?

Hello
I've been reading forums and downloading files for days. Many of the links in the posts no longer work. Posts are 5 years and older. There are no new ones. At least not one that actually works. Downgrade I mean. That's why I wrote this question and I'm asking for help - how to really downgrade my Galaxy S6 G920F.
Thanks for the help.

PSA: Downgrading WILL void your warranty!
What have you already done (what method, software) have you already tried?
The 100% surefire way to downgrade your phone (or any android phone really), is to:
1. Backup your phone data.
2. Switch the phone into download mode, connect to PC, boot into TWRP recovery through fastboot
3. Wipe your 7.0 firmware and all data
4. Flash android 5.02 ROM
For a samsung phones ODIN + Freya is also an option. Odin is a samsung's firmware flashing tool, Freya is a 3rd party program that can download the stock firmware android for you. All of these tools are available online, and you can ask on a samsung subsection of XDA about how to use them - people can give you up to date links.

I'm laughing because you write quite a lot in three days. Of course, this method does not work.
Is there anyone willing to help?

Totesnochill said:
PSA: Downgrading WILL void your warranty!
What have you already done (what method, software) have you already tried?
The 100% surefire way to downgrade your phone (or any android phone really), is to:
1. Backup your phone data.
2. Switch the phone into download mode, connect to PC, boot into TWRP recovery through fastboot
3. Wipe your 7.0 firmware and all data
4. Flash android 5.02 ROM
For a samsung phones ODIN + Freya is also an option. Odin is a samsung's firmware flashing tool, Freya is a 3rd party program that can download the stock firmware android for you. All of these tools are available online, and you can ask on a samsung subsection of XDA about how to use them - people can give you up to date links.
Click to expand...
Click to collapse
That is assuming they have TWRP.
Also, the part you mention about "boot into download mode, connect to PC then boot to TWRP via fastboot" is not correct because Samsung is not compatible with fastboot, adb works but fastboot does not. Some Samsung devices technically have a "fastboot mode" but it isn't functional, it doesn't respond to fastboot commands, it's basically useless.
Also, you can't flash a firmware that has a lower binary than the currently installed firmware so if the binary of the downgraded firmware is lower than the binary of the currently installed firmware, the downgraded firmware can't be flashed.
Samsung is making it harder and harder to downgrade their devices.

OK. I'm afraid I'm missing the point of what's being said.
I know it is possible and there are also posts about it, but they are old, the links in them do not work. I'm asking for an expert who knows how to do this, philosophizing about what it would be like if it somehow doesn't really help me and I'm not interested either
I'm only interested in a positive thought, help and not brainstorming, if you understand me?
No offense