Hi guys! i'm newbie to this site i hope you could help me.. my spreadtrum android phone is in a bootloop status right now and when i was gonna restore my backup in cwm it was complete but the problem is my phone did not boot always stock in boot logo which appears and vibrate twice then stucked on it.
Can anyone help me!! plss
luiscole992 said:
Hi guys! i'm newbie to this site i hope you could help me.. my spreadtrum android phone is in a bootloop status right now and when i was gonna restore my backup in cwm it was complete but the problem is my phone did not boot always stock in boot.img which appears and vibrate twice then stucked on it.
Can anyone help me!! plss
Click to expand...
Click to collapse
You mean to say thay your device boots and only logo is shown??
You take boot.img from your CWM backup and flash it using some tools which are available for your device, maybe ODIN or SP tool (if your device is mediatek).
Elce you can try flashing some CUSTOM Kernels available for you..
droid-devz said:
You mean to say thay your device boots and only logo is shown??
You take boot.img from your CWM backup and flash it using some tools which are available for your device, maybe ODIN or SP tool (if your device is mediatek).
Elce you can try flashing some CUSTOM Kernels available for you..
Click to expand...
Click to collapse
yes. only logo is shown.
Bricked XOLO Q3000 (Once Again)
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
SOLVED
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
How u flashed the philz recovery??
There is no way u can brick ur deivce while flashing recovery if u follow the methods given here.
U can always press the thanks button if ur using any stuff of any dev.
Formatting emmc means formatting ur internal storage too.
ur all data on internal storage will be gone
Bricked Again
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
help help help... avi
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Xolo Q3000 stuck in Boot Loop
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Su007 said:
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/show...74&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me
GauravBak said:
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me :cyclops:
The Most Important Page
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Haldar_dhruv said:
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
Click to expand...
Click to collapse
try too flash again the original roms via stock recovery..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
Try flashing the ctr recovery! use flashify and flash either the zip file or the img file! This should work
worked for me
MIUI ROM Woooooo
Yes I have already solved this post Thanks anyway
EAGERLY WAITING FOR MIUI rom to be uplaoded today by avi
KEEP CHECKING HERE http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
rashr..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
try to flash recovery.img via rashr... It shoul work for u.
mujaid714 said:
try to flash recovery.img via rashr... It shoul work for u.
Click to expand...
Click to collapse
Thanks But the Problem was already solved, would make some sense for others maybe.
Thanks For Helping
Haldar_dhruv said:
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Click to expand...
Click to collapse
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
alfamine said:
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
Click to expand...
Click to collapse
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Haldar_dhruv said:
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Click to expand...
Click to collapse
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Thanks
alfamine
Go to this link here
http://forum.xda-developers.com/q3000/development/xolo-q3000-one-ultimate-thread-t3038259
Then click on unbricking, install adb drivers in pc etc and continue as it says.
Karbonn sparkle v after trying cyanogen mod 13 nightlies got hard bricked and after that it is not switching on, there is no sign of life in the phone as the phone even doesnot goes in recovery mode and no bootlogo plz help me to clear this situation.
See if you can flash the firmware on it http://forum.xda-developers.com/sparkle-v/general/stock-rom-marshmallow-t3302087
Addhyan said:
Karbonn sparkle v after trying cyanogen mod 13 nightlies got hard bricked and after that it is not switching on, there is no sign of life in the phone as the phone even doesnot goes in recovery mode and no bootlogo plz help me to clear this situation.
Click to expand...
Click to collapse
Try to flash the stock firmware though SP flash tools.(if your device is detecting in PC )
How to root6.0marsmailow
Similar issue with Karbonn Sparkle V. Please Help!
AdityaAg said:
Try to flash the stock firmware though SP flash tools.(if your device is detecting in PC )
Click to expand...
Click to collapse
Hi Aditya, I've accidentally formatted all the partition on my sparkle V and now only a bootloop with KARBONN logo. I am able to go to fastboot but not to recovery. I tried flashing each recovery (CWM, TWRP, PHILZ) through fastboot and all the time the flashing went successful, but not at all going to recovery mood. I also tried connecting the phone with preloader VCOM driver to flash with SP tool, but my phone is no more detecting in VCOM mode as it was earlier. Any suggestion - if I can flash the ROM in fastboot mode or with the help of any other tool.
Please help,
Deb
D-expert said:
Hi Aditya, I've accidentally formatted all the partition on my sparkle V and now only a bootloop with KARBONN logo. I am able to go to fastboot but not to recovery. I tried flashing each recovery (CWM, TWRP, PHILZ) through fastboot and all the time the flashing went successful, but not at all going to recovery mood. I also tried connecting the phone with preloader VCOM driver to flash with SP tool, but my phone is no more detecting in VCOM mode as it was earlier. Any suggestion - if I can flash the ROM in fastboot mode or with the help of any other tool.
Please help,
Deb
Click to expand...
Click to collapse
Try flashing the rom in fastboot mode .
I have this problem last month that when I'm going to access recovery mode it always bootloop and doesn't do anything. THE LAST TIME I did is I flashed a twrp recovery image but I've download the wrong model for my phone. I used Flashify for flashing the wrong twrp recovery and as I entered, my phone rebooted but it stucked at the logo. So what I did was I removed the battery and it went to a boot. After that, I tried to enter in my recovery mode but it keep on bootlooping when I'm trying to access Recovery mode... I need suggestions and help from you guys! This problem was not solved by others that's why it will help not just me, also those who encountered my experience. I'm using Huawei Honor Bee :laugh::laugh:
Forgot to mention
I flashed the recovery img without unlocking the bootloader.
Nomorenoless said:
I flashed the recovery img without unlocking the bootloader.
Click to expand...
Click to collapse
You need to flash a copy of your device's stock recovery or flash your stock firmware.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Please help me, i tried to flash twrp from adb on vodafone n9 and now my phone is stuck on boot logo, cant enter in recovery mode, i dont have official firmware to flash with sp flash tool, please help me... :crying: :crying:
qAlexh said:
Please help me, i tried to flash twrp from adb on vodafone n9 and now my phone is stuck on boot logo, cant enter in recovery mode, i dont have official firmware to flash with sp flash tool, please help me... :crying: :crying:
Click to expand...
Click to collapse
Your only hope is to flash your firmware using SP flashtool or maybe try flashing a copy of stock recovery using adb the same way you flashed TWRP.
If you can't do either of those things, you might be out of luck getting the device fixed.
Sent from my LGL84VL using Tapatalk