Related
Samsung Galaxy Note 8.0 Case
Where did you buy yours?
Sent from my HTC One using Tapatalk 2
little rant...
What really annoys me about this and many cases is the lack of thought around the camera on the back. They leave a slot for it on the back peice of the case which is great, but when you open it up to actually take a photo, you need to hold the case like an open book as there isnt a slot on the front peice. I dont intend on using the camera much but having to hold the front flap out of the way of the lens while trying to get composition, focus and release the shutter is a pain in the bum! If I could flip the front all the way round to the back and hold it flush with the back, that would be far more convenient.
hertsjoatmon said:
little rant...
What really annoys me about this and many cases is the lack of thought around the camera on the back. They leave a slot for it on the back peice of the case which is great, but when you open it up to actually take a photo, you need to hold the case like an open book as there isnt a slot on the front peice. I dont intend on using the camera much but having to hold the front flap out of the way of the lens while trying to get composition, focus and release the shutter is a pain in the bum! If I could flip the front all the way round to the back and hold it flush with the back, that would be far more convenient.
Click to expand...
Click to collapse
+1!
What also bothers me a little is the slit in the front flap of the case... for US owners, it looks like a mistake since we don't have that speaker there. Other than that, very happy with the quality, low profile and details - rubber footings for landscape upright position, magnet to hold front flap as prop in "keyboard" mode. A little expensive but I did the round about with case buying with the tab 10.1 and ultimately liked the official book case most.
Cases are available at BestBuy and B&H.
Picked one up at Best Buy last night. Absolutely prefer this over the Moko i just got. Only thing missing compared to other cases is a loop for a larger stylus and it's not heavy enough where it needs a handstrap.
I don't care about a camera hole on the front flap (to take pictures when the flap is folded over) as rear camera on this is more vestigial to my tablet use.
I do have issues with trying to stand it up the tall way with the cover - it sometimes wont hold the stand form and flips the tablet down.
This may get easier as it breaks in. There is no clasp magnetic or otherwise that holds the screen cover closed so it will fly open at times.
The tablet is protected on 3 corners (except the one that holds the stylus, obviously), completely covers the plastic back except for camera hole and front flap is thin but should protect the screen well enough in a bag. I like the clean design and it does raise the "premium" feel of the tablet in hand by covering up all the plastic.
I think if you care about adding the least bulk to the unit while still having a means of protecting it a bit, I think it does well.
BTW, if you had the 7.7 and the OEM cover for that, this cover is almost exactly like it - except this front flap is even thinner than the one on that one and can fold to help it stand. The 7.7 form fitting case that Samsung made could only stand by reversing the case flap and it would always fall over.
I bought it from Best Buy as well, it's not my first choice of cases, but it's probably the best out there now. Just too expensive, but I need protection for this unit. I'm hoping Seidio makes a case but I don't think this tablet will sell that well. I hope I'm wrong but it's fairly expensive. I think it is worth it but I have terrible judgment and love electronics.
Sent from my SGH-T889 using Xparent Skyblue Tapatalk 2
Just curious, what colors are people getting? I picked up a white one at BB, but thinking about exchanging it for the black...
Every portable device I've owned since my first Walkman, with the exception of my 3rd gen iPod in 2004, has been black, so the white device and matching white case is a welcome change for me.
Sent from my GT-N5110 using xda premium
I couldn't take it anymore and exchanged for the black, lol. The all-white look was burning my eyes.
Picked this up today and it's going back. I do like how thin it is, but I notice the cover has a habit of bowing just enough to wake up the tablet and it's just close enough that it keeps waking it up. Case would be fine without the sleep/wake feature. Anyone know of a good knockoff without the magnet?
Sent from my GT-N5110 using Tapatalk 2
ExploreMN said:
Case would be fine without the sleep/wake feature. Anyone know of a good knockoff without the magnet?
Click to expand...
Click to collapse
You might like the STM Cape. It is a bit different, but appears to be very good quality, and it is less expensive and fairly light weight (judging by specs as I don't have one yet):
http://forum.xda-developers.com/showthread.php?t=2251888
I asked them and they confirmed it does not come with a magnet for wake/sleep. Personally that has disappointed me, but you provide a good example of where it can be a good thing to not have wake/sleep.
I've asked STM a few more questions that I'm waiting to hear back on, including what kind of padding is embedded in the front cover. Something that has concerned me about the official Samsung Book Cover is that the front cover seems so thin that I wonder how much protection it would really provide (particularly from any impact). The STM Cape appears to have some kind of stiff material (padding?) in between the outer layer and the soft inner lining. I'll post in the Cape thread whenever I hear back about that.
pluginalong said:
You might like the STM Cape. It is a bit different, but appears to be very good quality, and it is less expensive and fairly light weight (judging by specs as I don't have one yet):
http://forum.xda-developers.com/showthread.php?t=2251888
I asked them and they confirmed it does not come with a magnet for wake/sleep. Personally that has disappointed me, but you provide a good example of where it can be a good thing to not have wake/sleep.
I've asked STM a few more questions that I'm waiting to hear back on, including what kind of padding is embedded in the front cover. Something that has concerned me about the official Samsung Book Cover is that the front cover seems so thin that I wonder how much protection it would really provide (particularly from any impact). The STM Cape appears to have some kind of stiff material (padding?) in between the outer layer and the soft inner lining. I'll post in the Cape thread whenever I hear back about that.
Click to expand...
Click to collapse
Thanks, I'll check it out. I don't mind thin. I never do anything that would damage a device like a phone or tablet anyway. Mostly I just want it for scratch protection since it could slide around in my briefcase and what-not.
I'm ordering this case from ebay. Looks more stable then samsung case.
KLD-Smart-Wake-UP-Flip-PU-Leather-Case-Cover-Samsung-Galaxy-Note-8-0-N5100-N5110
Sent from my GT-N5100 using Tapatalk 2
scopidoo said:
I'm ordering this case from ebay. Looks more stable then samsung case. KLD-Smart-Wake-UP-Flip-PU-Leather-Case-Cover-Samsung-Galaxy-Note-8-0-N5100-N5110
Click to expand...
Click to collapse
If you haven't already ordered I'd recommend having a look at the following thread that was a bit negative about the KLD:
http://forum.xda-developers.com/showthread.php?t=2251300
The MoKo Ultra Slim Lightweight Smart-shell Stand Case mentioned in that same thread sounds more promising (in my opinion).
I have just ordered this one from ebay:
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=121107475861
(I cannot post links yet, you'll need to copy and paste in your web browser)
It is cheap and looks slim and similar to the KLD one and it has a magnetic tab to keep it securely closed.
According to the description it supports "auto sleep and wake up when close and open" but I am not sure if I believe it. I can always open a dispute if it is not true
pluginalong said:
If you haven't already ordered I'd recommend having a look at the following thread that was a bit negative about the KLD:
http://forum.xda-developers.com/showthread.php?t=2251300
The MoKo Ultra Slim Lightweight Smart-shell Stand Case mentioned in that same thread sounds more promising (in my opinion).
Click to expand...
Click to collapse
This does look like a winner. Not extremely please about the Samsung case, regarding the inability to stand it up or keep the flap closed.
If you ordered this let us know how it goes.
OneMoreBrick said:
This does look like a winner. Not extremely please about the Samsung case, regarding the inability to stand it up or keep the flap closed.
If you ordered this let us know how it goes.
Click to expand...
Click to collapse
Here's a helpful review:
http://forum.xda-developers.com/showthread.php?t=2270264
Anybody try the IVSO bluetooth keyboard cover?
http://www.amazon.com/Bluetooth-Key...&keywords=galaxy+note+8.0+keyboard+case+cover
drexappeal said:
Anybody try the IVSO bluetooth keyboard cover?
http://www.amazon.com/Bluetooth-Key...&keywords=galaxy+note+8.0+keyboard+case+cover
Click to expand...
Click to collapse
I have not, but that is an intriguing product. I wonder if you might get a sense of the quality by looking at the reviews for the below version which I would guess uses the same keyboard (but with a different enclosure)?
http://www.amazon.com/Samsung-Galaxy-Bluetooth-Keyboard-Portfolio/dp/B00BH1HI4M/ref=pd_sim_sbs_e_1
pluginalong said:
I have not, but that is an intriguing product. I wonder if you might get a sense of the quality by looking at the reviews for the below version which I would guess uses the same keyboard (but with a different enclosure)?
http://www.amazon.com/Samsung-Galaxy-Bluetooth-Keyboard-Portfolio/dp/B00BH1HI4M/ref=pd_sim_sbs_e_1
Click to expand...
Click to collapse
I read some reviews on the Note 10.1 version and they are mixed:
http://www.amazon.com/Wireless-Blue...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
I'll just keep it in consideration, unless someone on the forums actually purchases and tries it out.
Hi
My unicorn beetle case just arrive and I want to share my toughts with you.
First I order it from Amazon as I live in Chile the final cost was around 50 bucks.
I drop my first moto x 2014 (the one in the pics) and it screen shattered so a case for my new moto X was a must.
The case came in a really simple cardboard box, inside you find the 3 parts of the case:
- Front panel
- Back panel
- Belt clip holster
The plastic bag that contain them have a QR code with a link to a video of how asamble it but is really very easy.
The front panel have a integrated screen protector and only leave the mic, front camera and speaker unprotected (this is why this case is not waterproof).
The backpanel leaves the Motorola, the camera and the back mics unprotected also, but it have protectors for usb port and the audio jack.
The only fail that I notice is the holster, only once I was able to attach the phone to it, I haven't been able to do it again, it should be a lot more easier, but anyway I dind't plan to use it.
The phone dosn't gain a lot of weight and I still feel it comfortable.
Some photos
https:// scontent-b-gru.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/10405301_10152553649268087_4469391920130927022_n.jpg?oh=8d7511c2cbfc010f120973702630fb9f&oe=550D4C81
https:// scontent-b-gru.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10806349_10152553649388087_3407626409072602358_n.jpg?oh=2a8abb90dd5144da3481391dbc1befdb&oe=551C27EA (bubbles are from the phone screen protector not the case)
https:// scontent-a-gru.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10805777_10152553649488087_2531340061064646856_n.jpg?oh=91403792398331180f6afe21ecc3baf2&oe=55074813
https:// fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10389011_10152553649728087_8947927708711168419_n.jpg?oh=73d17d5df7fff4b68b84570d2aa7289c&oe=5518C45F&__gda__=1428036896_20efd91e8fa2e0d5d4718e9fde82870a
https:// scontent-b-gru.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/1972507_10152553649968087_18121166613486209_n.jpg?oh=741823360366a47bb0c241a1021c1439&oe=5506B170
https:// scontent-b-gru.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/10393956_10152553649863087_2683143752115958080_n.jpg?oh=6bf6b9fa2264386a272e4bf24af1d7ec&oe=54D99F75 (the stains are my fault)
Where did you buy it from? I am looking on amazon and I dont see it for sale any more.
blkbltwrestler said:
Where did you buy it from? I am looking on amazon and I dont see it for sale any more.
Click to expand...
Click to collapse
Amazon here is the link
http:// www.amazon.com/SUPCASE-Full-body-Pr...sim_cps_2?ie=UTF8&refRID=19648HH318XVMNJXQVH7
But now appears as unavaible.
It don't show up in the company webpage neither I don't know why.
Update:
The holster works great but the screen goes looking inside, the camera face out that is the reason why it dont fit when i tried
CTuna said:
Amazon here is the link
http:// www.amazon.com/SUPCASE-Full-body-Pr...sim_cps_2?ie=UTF8&refRID=19648HH318XVMNJXQVH7
But now appears as unavaible.
It don't show up in the company webpage neither I don't know why.
Click to expand...
Click to collapse
Thanks! thats all I was able to find too.
blkbltwrestler said:
Thanks! thats all I was able to find too.
Click to expand...
Click to collapse
Look at the reviews at amazon one of the last ones say that the guy bought 70! of these maybe they are out of stock.
CTuna said:
Look at the reviews at amazon one of the last ones say that the guy bought 70! of these maybe they are out of stock.
Click to expand...
Click to collapse
yikes that is crazy. Thats probably what happened they just sold out. Hopefully they get more in stock soon.
Can you give me the name of the Amazon Seller that you bought this from?
l_stevens said:
Can you give me the name of the Amazon Seller that you bought this from?
Click to expand...
Click to collapse
I think that was supcase as they made them, but I can't give you a specific answers as I bought it from Busca Libre a website that buy the things for you and handle all the shipping, taxes and other and charges you in local currency
Its back in stock!
CTuna said:
Its back in stock!
Click to expand...
Click to collapse
I actually just picked one up. I really like it. Its kinda big so I am not going to use it as my daily case just when I need the extra protection.
blkbltwrestler said:
I actually just picked one up. I really like it. Its kinda big so I am not going to use it as my daily case just when I need the extra protection.
Click to expand...
Click to collapse
I don't know if that will be a great idea, I use mine all the time but for a test that I really need to use wolfram alpha I remove it, I haven't been able since then to use it with out bubbles in the screen protector.
Actually bought one,
Very happy with it, just the hard plastic back is easily scratchable, i already got a deep scracth in it... Tried it on a coloured back moto X too and the frosted back is wonderful !
15€ on Amazon.fr
any updates? i tried the link you posted but had no luck. i got my phone on jan 2,15 and havent yet been able to find a case i like for it.
I've had this case for about a week, and I have mixed feelings. It's a very rugged case, and I feel comfortable about the phone not being damaged. However, there are a few things I would change about this case if I could. First, since the case isn't waterproof, it could do without the integrated screen protector and headphone/power port covers. It takes a little bit of dexterity to hold the cover open just to plug in the charger. Secondly, the power and volume buttons could be more pronounced. I have accidentally turned off the screen many times while trying to adjust the volume.
I don't regret the purchase, though, and I'd definitely recommend it as an alternative to Otterbox.
I've had this case in white for just over a month, here are my impressions.
- sturdy case
- excellent quality
- great price
First thing I did was yank off the screen protector. It is a far better plan to apply something like a BSE skin than to keep using the screen protector that's included.
This means you can take off/on the case with little fuss as much as you want. Its easy to remove and seems up to the task of repeated removal.
The fact that the front of the phone sits in the trim piece is awesome. Makes for a sandwiched and protected feel.
I like the port covers. Yes, they can be a pain to pop open for time to time but again they also seem to be built well enough to take the abuse.
Since we don't have a waterproof phone but only the nanocoating inside I like the added ingress protection that they offer.
I have the white/grey case and it is gaining some darkness on the corners but I'll blame my grubby mitts on that one.
The holster is good not great. Phone sits well in it and feels well made. Too bad its missing the kickstand in the clip.
All in all I give it a 9/10.
For the price it sells for and the protection it offers its a no brainer.
Sent from my BambooX
white unicorn?!
@shanedragon, could you please post some pics of the case? I'm about to pull the trigger on the black/blue version, but I'm curious about how the white looks in real life.
I'll do the same, if I get the blue.
Thanks!
-Brian*
buraian98 said:
@shanedragon, could you please post some pics of the case? I'm about to pull the trigger on the black/blue version, but I'm curious about how the white looks in real life.
I'll do the same, if I get the blue.
Thanks!
-Brian*
Click to expand...
Click to collapse
I have it in white. Here are a few photos I took. The photo of the front is a bit blurry.. Sorry!
I've had one of these cases for a while. I only use it when at work and do a manual job with dust, grit, grime and angry bovines. Well they're not angry all the time! The case is the dark gray/black and is in not bad condition considering. The Moto X on the other hand is pristine despites drops out of open tractor doors, drops onto concrete and countless excursions onto cab floors.
The built in screen protector is useful as I don't have anything on my moto x 2014 screen. I tried a couple of the glass screen protectors but removed both after a short time with the edges lifting and dust getting under the lifted edges. I also like the port covers though agree both are a little tricky to open. That said I rarely open either when the case is fitted. On previous phones I've has dust and chaff get jammed in the usb port and once somehow managed to get an animal feed pellet stuck in the headphones jack.
When I ordered the Unicorn case, unbeknown to me the mrs had ordered me an Otterbox Defender case so have that as well. It seems to bulk the phone more than the Unicorn case and the rubber texture makes it less easy to remove from pockets. It is also harder to fit compared to the Unicorn but on the other hand you about need a tyre lever to remove the Unicorn. It's a good case but prefer the Unicorn. I say again I only use a case on my Moto X for work. For pleasure it goes bare
I ordered the Beetle case, and it is in my opinion, the best case I have tried for the phone.
Thanks for the suggestion
Any word on cases for the Pixel C yet? If you find one please post.
Thanks!
Sent from my Nexus 6P using Tapatalk
I've just seen a sleeve that will be out later this month:
http://www.amazon.com/Tablet-Sleeve...=UTF8&qid=1449678769&sr=1-11&keywords=pixel+c
I wouldn't mind a faux leather flip cover for times I know I will not be using the keyboard for a while.
I am looking for a leather case with kickstand function. Anyone seen anything?
I am looking for something like this http://www.amazon.com/MoKo-Slim-Fit-Multi-angle-Android-Samsung/dp/B00A9G985S/
With automatic sleep/wake-up function. I use very simillar case with Nexus 10 and I am very satisfied with that.
Anyone seen anything?
I think case manufacturers are going to be running into problems since the Pixel C uses a lot of magnets in the tablet chassis to attach it to the optional keyboard. Putting on a standard cover is going to negate this benefit I would imagine.
I'd like to get a sleeve, sort of like the one posted earlier, that will allow me to protect my Pixel C and keyboard when I throw in in a bag or backpack since I'm not sure how resistant the aluminum body will be towards scuffs and scratches.
Geese1 said:
I think case manufacturers are going to be running into problems since the Pixel C uses a lot of magnets in the tablet chassis to attach it to the optional keyboard. Putting on a standard cover is going to negate this benefit I would imagine.
I'd like to get a sleeve, sort of like the one posted earlier, that will allow me to protect my Pixel C and keyboard when I throw in in a bag or backpack since I'm not sure how resistant the aluminum body will be towards scuffs and scratches.
Click to expand...
Click to collapse
I need a simple book cover type samsung like case
They could use all the magnets to benefit the folio type case set up like samsung uses the clips in the back of the tab s 8.4
I am THRILLED to be using again my Saddleback leather sleeve from my original iPad. Funny, only couple years ago the iPad came out but the Pixel C + keyboard are about the same thickness Tablet alone would be too loose. Not sure if they make it anymore, but maybe check ebay?
Sent from my Pixel C using Tapatalk
davedigerati said:
I am THRILLED to be using again my Saddleback leather sleeve from my original iPad. Funny, only couple years ago the iPad came out but the Pixel C + keyboard are about the same thickness Tablet alone would be too loose. Not sure if they make it anymore, but maybe check ebay?
Sent from my Pixel C using Tapatalk
Click to expand...
Click to collapse
its funny but i am also using my iPad 3 case that fits the Pix C + keyboard very nicely
I ordered this sleeve which will be here tomorrow: http://www.amazon.com/gp/product/B005D1R07M
Based on the dimensions, should be a good fit. Comments mention a magnetic clasp which should work well! We'll see how it is for just $4.
I'm looking for a magic/smart cover like the one for the N9 (https://goo.gl/79fapJ), anyone seen anything like it for the C? It should only cover the front and attach via magnets.
Niggo372 said:
I'm looking for a magic/smart cover like the one for the N9 (https://goo.gl/79fapJ), anyone seen anything like it for the C? It should only cover the front and attach via magnets.
Click to expand...
Click to collapse
Yeah, this please. Surprised Google didn't think about users who DON'T want a keyboard, just a thin foldable cover for their tablet screen.
Niggo372 said:
I'm looking for a magic/smart cover like the one for the N9 (https://goo.gl/79fapJ), anyone seen anything like it for the C? It should only cover the front and attach via magnets.
Click to expand...
Click to collapse
exactly what I was referring too with my Tab S 8.4! We need this now
all the people that got it for just a tablet and not a "c"onvertible
The Nexus 9 smart cover was one of THE worst engineered covers I have every used! In other words, it was just a big piece of cr** and not worth the money. Let's hope they bring us something better.
Sam-X- said:
The Nexus 9 smart cover was one of THE worst engineered covers I have every used! In other words, it was just a big piece of cr** and not worth the money. Let's hope they bring us something better.
Click to expand...
Click to collapse
Don't confuse it being a piece of crap to it not doing what you want it to. I was sceptical about it at first, but after a while it started to work extremely well for me and now I don't want anything else anymore!
Niggo372 said:
Don't confuse it being a piece of crap to it not doing what you want it to. I was sceptical about it at first, but after a while it started to work extremely well for me and now I don't want anything else anymore!
Click to expand...
Click to collapse
The magnets in there are just to weak so it comes off the screen to easily (yes, I am using it on the correct side), or does not hold the tablet in place when used a a stand. That alone is a no-go for me.
Also, as a kickstand, depending on the position, it makes it very hard to access the volume- and powerbutton(s), or will accidentally press the buttons down sometimes. This is unacceptable.
Anyone have any input on this sleeve:
http://www.amazon.com/gp/product/B003CFAHQC/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=1944687442&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B005550NQ6&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=0NJM888E0PN3VKMH3K7V
Saw it at my local Staples today when I was doing some last minute Christmas shopping for the wife. It's just what I was looking for, and I "think" the Pixel C should fit, but I figured I'd check here first to see if anyone had any experience with it. If nothing else, I'll bring my Pixel C up to the store to test it out and see if it will work.
Geese1 said:
Anyone have any input on this sleeve:
http://www.amazon.com/gp/product/B003CFAHQC/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=1944687442&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B005550NQ6&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=0NJM888E0PN3VKMH3K7V
Saw it at my local Staples today when I was doing some last minute Christmas shopping for the wife. It's just what I was looking for, and I "think" the Pixel C should fit, but I figured I'd check here first to see if anyone had any experience with it. If nothing else, I'll bring my Pixel C up to the store to test it out and see if it will work.
Click to expand...
Click to collapse
So I went ahead and ran out to Staples again, this time with my Pixel C. They actually had a couple of different tablet cases/sleeves, but I ended up going with the one I posted above. Fits very well, and in fact the sleeve is actually a little bigger than needed (probably because the sleeve has a more traditional 16:9 ratio), so you could actually fit a few small things, such as papers, cables, etc., without hurting the slim design.
Now I might look into getting a case actually designed for the Pixel C once they start rolling out, but I"m very happy with this in the meantime, especially since Staples wanted to charge me $24.99 for it and I just had them price match Amazon's $10.97! :laugh:
Esta es la funda que llevo de momento:
Because I am a rookie I can not include the page. Universal HT Silver 10.1
Perfect size, 2-position, nice touch, use c Port aux speakers and cameras ok
The only complaint one of the four holes in the cover 2 side microphone but I do not use it since. I give it 8 out of 10
Greetings fellow.
hey guys what do you think about this case ???
Khaon said:
hey guys what do you think about this case ???
Click to expand...
Click to collapse
I like that case, but I wish it had the cut out for the back cover lights. (battery level lights) I think they are a very nice aesthetic touch that should be visible.
Hi,
Is anyone aware of a simple and reasonable looking (not cute or covered in decorations) case for the Mi5/s that you can attach a lanyard to. I'm after two cases, a waterproof one, of which there are a numerous generic ones on Amazon (very few Mi5 specific) but also just a simple case that the phone sits in, to which a lanyard can be attached, as I work outdoors and would like to use this phone to replace my compact camera.
I've been searching on Google and anything vaguely like what I'm after is either leather, covered in cartoons or made to resemble melting ice cream.
Ken_987654321 said:
Hi,
Is anyone aware of a simple and reasonable looking (not cute or covered in decorations) case for the Mi5/s that you can attach a lanyard to. I'm after two cases, a waterproof one, of which there are a numerous generic ones on Amazon (very few Mi5 specific) but also just a simple case that the phone sits in, to which a lanyard can be attached, as I work outdoors and would like to use this phone to replace my compact camera.
I've been searching on Google and anything vaguely like what I'm after is either leather, covered in cartoons or made to resemble melting ice cream.
Click to expand...
Click to collapse
Ringke Fusion for Mi 5 might right be up your alley. In my country, it came with a note to leave an honest review on the item and they sent a high quality handstrap worth $11. Sorry can't link yet.
+1 for the Ringke Fusion. I have it, not the best on "preserving the look", but it definitely protects very well the phone.
And obviously you can attach a lanyard.
Thanks, I've decided to go for a Mi5s, for which there seems to be even less accessories and cases for. If anyone knows of any suitable ones for the Mi5s, please comment below. Otherwise, I think I'll need to modify a standard Mi5s case.
https://www.amazon.com/gp/aw/d/B078...phone+case&dpPl=1&dpID=51x55EIMEDL&ref=plSrch
Looks pretty sweet, just came across this case on Amazon
Sent from my PH-1 using Tapatalk
I ordered one and hopefully get it by Friday/Saturday. No prime shipping with this purchase unfort.
Would be interested to know if the case blocks the speaker on the phone or it routes the sound toward you. It looks like it could be routing the sound from the speak to the 2 holes at the bottom.
Bigdny said:
I ordered one and hopefully get it by Friday/Saturday. No prime shipping with this purchase unfort.
Click to expand...
Click to collapse
Please let us know how it is. It looks pretty decent, hope it's not that bulky. Thanks
Sent from my PH-1 using Tapatalk
It seem that parts of the case are metal(aluminum?) and I hope this case won't make cell reception even weaker than it already is.
dandan2980 said:
https://www.amazon.com/gp/aw/d/B078...phone+case&dpPl=1&dpID=51x55EIMEDL&ref=plSrch
Looks pretty sweet, just came across this case on Amazon
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
Xela19115 also mentioned the case here a few days ago. Looks like a tank itself.
dandan2980 said:
https://www.amazon.com/gp/aw/d/B078...phone+case&dpPl=1&dpID=51x55EIMEDL&ref=plSrch
Looks pretty sweet, just came across this case on Amazon
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
I may order when someone else serves as the test subject.
I'll stay tuned to see how other folks like it.
I ordered this case and immediately had horrible signal issues. I've e-mailed the seller asking if there's a solution. It's too bad to use as a phone, though wifi was not blocked at all. Normally I have strong LTE in my house but it's unusable with the case on.
Marvel should sue them for stealing Spiderman design (j/k). Only if this case had a belt clip, I'd bite. I want someone to make a case with a clip!
goldentequila said:
Marvel should sue them for stealing Spiderman design (j/k). Only if this case had a belt clip, I'd bite. I want someone to make a case with a clip!
Click to expand...
Click to collapse
They already have some cases with holster and belt clip on Amazon.
Sent from my ONEPLUS 3T using Tapatalk
to each their own... but gawd, that's ugly.
I bought it when it first went up, before their description made it clear it was steel, I was hoping for a thin metal slip. The case is heavy as hell, and the built in screen protector traps pocket lint between the screen protector and screen. The case is held on with 6 hex screws, which worked, but made it even heavier.
It did muffle sound a little, as to radio...I'm just switching to Ting with GSM from Sprint with my phone. I was worried for a bit that my phone was the issue, but a girl who has a galaxy phone has all the same signal issues I did on Sprint. I'll let you know of mine is better, and how GSM is impacted by the case later.
---------- Post added at 09:15 AM ---------- Previous post was at 09:10 AM ----------
I should also mention, like the Tudia, it made my side access worse. I use Lucid launcher specifically for the left side slide out favorite apps, these were really hard to activate on both this case, and the Tudia. I also use a pie fromthe right side, this was similarly hard to trigger, but at least I could customize the trigger width to accommodate the massive bearth.
Here is another new case on Amazon.
https://smile.amazon.com/gp/product/B07C4YVM6V/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Anyone seen it? Have it?
(Fixed the link)
tech_head said:
Here is another new case on Amazon.
https://smile.amazon.com/Essential-...696&sr=1-1-spons&keywords=essential+ph-1&th=1
Anyone seen it? Have it?
Click to expand...
Click to collapse
The shortcut leads to the phone rather than a case.
jhs39 said:
The shortcut leads to the phone rather than a case.
Click to expand...
Click to collapse
Fixed
https://smile.amazon.com/gp/product/B07C4YVM6V/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
That doesn't look like a quality case to me. The back looks like plastic. But there aren't a lot of cases compatible with the 360 Camera so if you want specifically to use that feature it's probably worth taking the chance since the case is so cheap. But if you don't care about the 360 Camera there are clearly way better choices.
jhs39 said:
That doesn't look like a quality case to me. The back looks like plastic. But there aren't a lot of cases compatible with the 360 Camera so if you want specifically to use that feature it's probably worth taking the chance since the case is so cheap. But if you don't care about the 360 Camera there are clearly way better choices.
Click to expand...
Click to collapse
I bought it.
It actually isn't cheap feeling.
Soft touch.
Pretty heavy.
Secures on the phone pretty well.
Looks like it will protect the phone in a drop.
It does add bulk.
The flip down for the camera is pretty cool.
The opening on the back for the camera is large since the case is so deep.
The fingerprint sensor hole is also large because they made it to clear the camera opening without leaving a small piece of TPU inside.
Overall I like it for the ~$10 I paid.
It is either this or naked.
I bought it as well.
Doesn't feel cheap to me.
Adds a decent amount of bulk to the phone but not too much.
The flip down feels pretty sturdy and hopefully it won't loosen over time.
It has a nice feel to it. Soft but not slick. Sort of rubberized.
I've been using the first Tudia case that came out for this phone for awhile now and it's fine most of the time. But when I do use the 360 lens it is a hassle. Having to peel the case off. Hopefully this fixes that problem.
ryaleon87 said:
I bought it as well.
Doesn't feel cheap to me.
Adds a decent amount of bulk to the phone but not too much.
The flip down feels pretty sturdy and hopefully it won't loosen over time.
It has a nice feel to it. Soft but not slick. Sort of rubberized.
I've been using the first Tudia case that came out for this phone for awhile now and it's fine most of the time. But when I do use the 360 lens it is a hassle. Having to peel the case off. Hopefully this fixes that problem.
Click to expand...
Click to collapse
I tried it yesterday and the flip down works fine.
It's a bit stiff to latch and unlatch, but it does solve the 360 camera issue.
No more case removal! It also means that those screen protectors that glue around the edges will bel see likely to lift.
I still haven't decided if I want to use LOCA to attach a screen protector to my phone.