Hey, everyone, I am using Pixel Experience ROM now, it is very smoothly and has perfect battery life..
But I wanna to try android P which is project treble but I never be success...
Does anyone have better idea about that?
My device always stays at fastboot screen.
Source address : https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
I tryied 2/3 times without luck my phone stuck at logo miui
Wait for new custom vendor image or lineage OS support. Then we´ll be able to install treble P.
Could you please show me the download and instruction for Pixel Experience ROM for mi mix 2s. Thanks.
PITTAR said:
I tryied 2/3 times without luck my phone stuck at logo miui
Click to expand...
Click to collapse
Please try DP2 vendor?
bugrevealingbme said:
Please try DP2 vendor?
Click to expand...
Click to collapse
I'll try After weekend
[email protected] said:
Could you please show me the download and instruction for Pixel Experience ROM for mi mix 2s. Thanks.
Click to expand...
Click to collapse
You find it at the follow link:
https://forum.xda-developers.com/pr...e-development/8-1-0-pixel-experience-t3796011
Remember that probably to use PlayStore you need to register your device with his I'd to Google site, use the app below to obtain it.
I registered my ID, then rebooted device, made factory r set with twrp and reboot, then setup all.
Otherwise more simply you can use immediately the app and register your device at: https://www.google.com/android/uncertified/
Then flash system image of Pixel Experience, boot and setup normally, there's also a guide:
https://www.google.it/amp/s/www.xda...fix-device-not-certified-by-google-error/amp/
VampireHeart said:
You find it at the follow link:
https://forum.xda-developers.com/pr...e-development/8-1-0-pixel-experience-t3796011
Remember that probably to use PlayStore you need to register your device with his I'd to Google site, use the app below to obtain it.
I registered my ID, then rebooted device, made factory r set with twrp and reboot, then setup all.
Otherwise more simply you can use immediately the app and register your device at: https://www.google.com/android/uncertified/
Then flash system image of Pixel Experience, boot and setup normally, there's also a guide:
https://www.google.it/amp/s/www.xda...fix-device-not-certified-by-google-error/amp/
Click to expand...
Click to collapse
I tried to register the phone but it remains uncertified and I cannot use Google apk.
[email protected] said:
I tried to register the phone but it remains uncertified and I cannot use Google apk.
Click to expand...
Click to collapse
Try in this way, register the device after installed and made the first setup of the ROM, then if you will receive that message reboot and made a factory reset, now reboot and setup, now should work, worked for me.
VampireHeart said:
Try in this way, register the device after installed and made the first setup of the ROM, then if you will receive that message reboot and made a factory reset, now reboot and setup, now should work, worked for me.
Click to expand...
Click to collapse
I tried as you suggested a couple of time but it does not work for me. Thanks.
[email protected] said:
I tried as you suggested a couple of time but it does not work for me. Thanks.
Click to expand...
Click to collapse
Try to run the xiaomi flash tool as admin
[email protected] said:
I tried as you suggested a couple of time but it does not work for me. Thanks.
Click to expand...
Click to collapse
Somenone needed to reboot many times to get it work.
VampireHeart said:
Somenone needed to reboot many times to get it work.
Click to expand...
Click to collapse
Every time I factory reset the rom, the Googile service framework android ID change so I have to register again. Am I doing it correctly or after I register the phone I just simply reboot until it works?
[email protected] said:
Every time I factory reset the rom, the Googile service framework android ID change so I have to register again. Am I doing it correctly or after I register the phone I just simply reboot until it works?
Click to expand...
Click to collapse
Try simply to registry and reboot some times, strange that your device ID change every time, that will be the same if you don't flash magisk.
Just flashed for the second time and had salme issue, solved only Witch facrory reset because first boot don't recognize my account Gmail.
VampireHeart said:
Try simply to registry and reboot some times, strange that your device ID change every time, that will be the same if you don't flash magisk.
Just flashed for the second time and had salme issue, solved only Witch facrory reset because first boot don't recognize my account Gmail.
Click to expand...
Click to collapse
I flash the rom again and this time it works after I register the phone with a different Google framework android ID.
[email protected] said:
I flash the rom again and this time it works after I register the phone with a different Google framework android ID.
Click to expand...
Click to collapse
Yes i said, is very strange, there isn't a precise method.
Related
My device would always restart
I know my device right
No untying
I found a problem
Why is he doing restart
I am with this rom
It works fine all is not doing a restart
When I install another rom problem begins to restart stuck
Example Hammerhead v1.8 installed BlissPop
And much rom it to the same problem
Why is this happening? Really strange problem
There is a solution? Know why this happens?
Sorry for my bad English
haimmalka said:
My device would always restart
I know my device right
No untying
I found a problem
Why is he doing restart
I am with this rom
It works fine all is not doing a restart
When I install another rom problem begins to restart stuck
Example Hammerhead v1.8 installed BlissPop
And much rom it to the same problem
Why is this happening? Really strange problem
There is a solution? Know why this happens?
Sorry for my bad English
Click to expand...
Click to collapse
did you follow all instructions for the new rom install properly? its some problem with the rom. Try a new rom and make sure you follow all the instructions properly
rollerdyke44 said:
did you follow all instructions for the new rom install properly? its some problem with the rom. Try a new rom and make sure you follow all the instructions properly
Click to expand...
Click to collapse
I do it right
wipe
Then install rom
There rom works
Some do not work to restart always get stuck
I wonder why
haimmalka said:
My device would always restart
I know my device right
No untying
I found a problem
Why is he doing restart
I am with this rom
It works fine all is not doing a restart
When I install another rom problem begins to restart stuck
Example Hammerhead v1.8 installed BlissPop
And much rom it to the same problem
Why is this happening? Really strange problem
There is a solution? Know why this happens?
Sorry for my bad English
Click to expand...
Click to collapse
If nothing else works flash a factory image ☺
sachin.parmar100 said:
If nothing else works flash a factory image
Click to expand...
Click to collapse
What you seem I do not understand?
haimmalka said:
What you seem I do not understand?
Click to expand...
Click to collapse
I meant if any other methods doesn't work then grab a factory image via Google server and flash it via fastboot
Link :
https://developers.google.com/android/nexus/images
sachin.parmar100 said:
I meant if any other methods doesn't work then grab a factory image via Google server and flash it via fastboot
Link :
https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
I understood but I ask why this is happening
Some of the works
And some do not work restart
I want to know what the problem is
Probably kernel issue.
Aerowinder said:
Probably kernel issue.
Click to expand...
Click to collapse
Explain what this means?
haimmalka said:
Explain what this means?
Click to expand...
Click to collapse
Google it
dicecuber said:
Google it
Click to expand...
Click to collapse
Hahaha
I looked it up on Google
I went back to the same state device always do a restart
Until it worked fine now again it came back to do it] =
I was looking google what he means I get here:
http://kernels.franco-lnx.net/Nexus5/5.0/
Then again it returned to constantly restart the device
Now there is a direction to know how it happens?
How to fix it?
I do not remember what I did that worked
Tip know at least that's how it happens:crying:
haimmalka said:
Explain what this means?
Click to expand...
Click to collapse
A kernel acts as a connection between the
hardware and the software.
so if you flash a wrong kernel, it will misbehave
sachin.parmar100 said:
A kernel acts as a connection between the
hardware and the software.
so if you flash a wrong kernel, it will misbehave
Click to expand...
Click to collapse
I think that's a problem for the solution of the fire makes it
I order the same day repair lab
Flash a factory image. If the restarts stop then you know it's a problem with the ROM/kernel. Not all phones are identical, what may work for some doesn't always work for others. Your phone simply may not like some custom kernels, simple as that. If the ones you are flashing are undervolted by default that could be the problem, as some phones respond better to undervolting than others.
_MetalHead_ said:
Flash a factory image. If the restarts stop then you know it's a problem with the ROM/kernel. Not all phones are identical, what may work for some doesn't always work for others. Your phone simply may not like some custom kernels, simple as that. If the ones you are flashing are undervolted by default that could be the problem, as some phones respond better to undervolting than others.
Click to expand...
Click to collapse
Happens all the time for my device
I also install this rom Original still to helping through Toolkit
I also put a device
Start-up Shutdown button repair
It did not help thinking maybe this is the problem
So what is the problem I can not figure] =
haimmalka said:
Happens all the time for my device
I also install this rom Original still to helping through Toolkit
I also put a device
Start-up Shutdown button repair
It did not help thinking maybe this is the problem
So what is the problem I can not figure] =
Click to expand...
Click to collapse
Don't use toolkits. Flash the system image with fastboot. If the problem is still there, it's your phone. If the problem disappears, it's the ROM/kernel. Again, use fastboot and not a toolkit.
_MetalHead_ said:
Don't use toolkits. Flash the system image with fastboot. If the problem is still there, it's your phone. If the problem disappears, it's the ROM/kernel. Again, use fastboot and not a toolkit.
Click to expand...
Click to collapse
I try many things to no avail
I put it back to the lab to solve this problem
I've had enough to deal with it without success..
I do not know if it's a software problem
Or issue with the device
I do not believe more than 5 Nexus device that happens to many people
haimmalka said:
I try many things to no avail
I put it back to the lab to solve this problem
I've had enough to deal with it without success..
I do not know if it's a software problem
Or issue with the device
I do not believe more than 5 Nexus device that happens to many people
Click to expand...
Click to collapse
But have you restored to 100% stock by flashing a factory image using fastboot?
_MetalHead_ said:
But have you restored to 100% stock by flashing a factory image using fastboot?
Click to expand...
Click to collapse
I do not understand exactly what you record
I can not understand English I use Google Translate
Thank you you try to help
You need to tell me what to do to try ..
I just try it
Guide me step by step what to do
If you ask yes I have fastboot
Files
flash-all
image-hammerhead-ktu84p
bootloader-hammerhead-hhz11k
radio-hammerhead-m8974a-2.0.50.2.22
image-hammerhead-krt16m
cache
boot
bootloader-hammerhead-HHZ11d
userdata
system
recovery
I press
flash-all
Command window opens install it
It does not help
I also make it a manual command that does not help
I try a lot of versions
This is repeated restart problem ]=
NOTICE: I found out that this method doesn't work with the refurbished or the T-Mobile warranty exchange version. If you do Step 6, it would show the start up screen after 5 seconds being on the bootloader. If anyone has a fix for it, let me know!
Before you start, if you have access to the phone, be sure to:
• Remove your Google account
• Take off your lock screen password/PIN/pattern
• Uncheck “Protect Your Phone” from Settings > Security
• Deactivate all device administrators from Settings > Security (Optional; Just to be safe)
The reason you want to do this before you restore is that the factory image procedure wipes all data from your phone and it may trigger a “Verify Your Device” screen after flashing. You may have an error accessing your phone because the password of your Google account is incorrect, even though it is/isn’t correct. It’s very hard to recover from it because the “Verify Your Device” module isn’t really complete when it was implemented on this phone and it’s an Android 4.4.x device. There shouldn’t be a reason why it should be there since this module should exists on Android 5.1+. If you don’t have access to the phone to change/disable these settings, I recommend not proceeding if you want a bricked phone due that module error. If you still want to do it and you know FOR SURE that you have no password on lock screen and/or a Google account, then sure, by all means.
If you still don’t understand what I wrote above, read this forum or research on Android Device Protection.
UPDATE: PaKii94 found a way to bypass Android Device Protection. Be sure to read posts 21 & 23 for more information and thank him for that!
Click to expand...
Click to collapse
Download the factory image files before you start: Factory Image Files
Optional. The USB drivers should be in the factory image files: USB Drivers
Instructions:
1. Be sure your phone is completely powered off. You will know when it’s completely shut down when your phone vibrates after it shuts down.
2. Extract the files and then open \tool\EngineeringSoftwareDownload_S.exe. Also, the USB drivers are also in the tool directory.
3. The application should now be opened, but it asks for the user authentication. Here’s the login:
Username: SU_IN.Panasonic
Password: KoD8naL2
Server: Choose any
Click to expand...
Click to collapse
4. After you log in, you should see a flashing dialog. Now let’s prepare to flash!
5. Hold the volume up and down keys while plugging in the USB port. You should see that your phone is installing drivers. If you see a dialog asking for the destination of the drivers, copy the destination and paste it. (Make sure you see the notification LED lights and not see the charging screen/boot screen. If you do see it, take off the battery and do Step 6 again.)
6. After installation is complete, click the row where the COM port is new and click ‘Upgrade’.
7. It should show up a COM port and it will do its flashing. (If you have an error message, take off the battery and repeat Step 6.)
8. After flashing is finished, take off the USB from the phone and it should restart automatically. If a restart doesn’t take effect, just turn on the phone.
9. Here you go, your phone is restored! Your stress is gone! Be sure to put a Thanks afterwards!
I tried to use this to get my onetouch pop Astro back up but every time it tries to flash it keeps saying low battery and switch to high speed com port.Not sure what to do next.My phone was rooted and I took an ota update and it failed now it just boots to recovery.
wildchild048 said:
I tried to use this to get my onetouch pop Astro back up but every time it tries to flash it keeps saying low battery and switch to high speed com port.Not sure what to do next.My phone was rooted and I took an ota update and it failed now it just boots to recovery.
Click to expand...
Click to collapse
Was the battery charged?
If it was, try repeating Step 6 and try every USB port until it becomes successful. It may take a couple of times for it to flash.
download link is broken
Can you please upload or send a new link for the firmware and drivers. Thanks. You can please send me the link: [email protected]
Link is broken, I tried it last night and it worked but its not today,[email protected] please email it to me
Eemownz said:
Link is broken, I tried it last night and it worked but its not today,[email protected] please email it to me
Click to expand...
Click to collapse
kwamegh1 said:
Can you please upload or send a new link for the firmware and drivers. Thanks. You can please send me the link: [email protected]
Click to expand...
Click to collapse
I have DM'ed you guys the download links. Check your XDA accounts. Sorry I couldn't send via e-mail.
Hi everyone!
Great post!
I was looking for custom ROMs for Astro Pop but I cant find anything.
This phone has a good hardware but the stock android version maybe isnt the best for it.
Does anyone know if it's possible to flash it a CM or other compatible room?
Thanks for all.
Bye.
The Username is reading as incorrect. Is there an updated one that can be used? Has anyone figured out another way to restore this device from a soft brick state?
fredbhz1 said:
Hi everyone!
Great post!
I was looking for custom ROMs for Astro Pop but I cant find anything.
This phone has a good hardware but the stock android version maybe isnt the best for it.
Does anyone know if it's possible to flash it a CM or other compatible room?
Thanks for all.
Bye.
Click to expand...
Click to collapse
Unfortunately, no. There isn't a way to flash it at the moment and there isn't any custom ROMs developed for this phone
XCore64 said:
Unfortunately, no. There isn't a way to flash it at the moment and there isn't any custom ROMs developed for this phone
Click to expand...
Click to collapse
Oh, sorry to hear that
Thank you very much and have a nice day!
Link?
I'd like to try this and the links are broken. Could you DM them? Thanks!
Wannabe Jedi said:
I'd like to try this and the links are broken. Could you DM them? Thanks!
Click to expand...
Click to collapse
Just sent it to you. Go and check it
Quick question, would xposed framework work on this phone or would it be bricked?
this only for 5042T-2BTBUS1
do you have 5042T-2BWFUS1-R ??
thx
bam_ said:
Quick question, would xposed framework work on this phone or would it be bricked?
Click to expand...
Click to collapse
I tried it on the A3CUMC1 firmware on Xposed 2.6.1.
This shows up this on Framework:
There seems to be a known issue ("Aliyun OS") with your ROM. Installing Xposed might not work or lead to severe problems. Click here for details about this issue.
Click to expand...
Click to collapse
I installed it anyways and there isn't any problems with it. No bootloops and module runtime errors. You should be good.
Link Seems to be broken...
Can you please send me the updated link.... it would be greatly appreciated. .. [email protected] is my email address.
Can I also have the link? [email protected] Thanks!!!
whiteboiz93 said:
Can you please send me the updated link.... it would be greatly appreciated. .. [email protected] is my email address.
Click to expand...
Click to collapse
srraikov said:
Can I also have the link? [email protected] Thanks!!!
Click to expand...
Click to collapse
https://drive.google.com/folderview?id=0B4TUksJrQEM9VDdMSjR3dS1Xc2c&usp=sharing
clbsamcodon said:
this only for 5042T-2BTBUS1
do you have 5042T-2BWFUS1-R ??
thx
Click to expand...
Click to collapse
I tried looking for it, no luck
5042t-2bwfus1-
I rewrote the program , under the 5042T-2BWFUS1-, but it takes off , any suggestions ?
I'm on a Pixel 2 and I sideloaded the February 2018 security update. I tried to install Magisk again by using "fastboot boot twrp-image.img". I've tried all the versions of TWRP available on their site (twrp.me)
I get into TWRP and enter in my pin to decrypt the phone, which I've always used. TWRP says incorrect password. This is the first time I've ever gotten this.
Anybody else having the same issue, or tips to fix? Thanks!
Yes, it's been mentioned a few times. Simply remove the password lock from your phone before booting into recovery, then add your password back after you're done flashing.
PuffDaddy_d said:
Yes, it's been mentioned a few times. Simply remove the password lock from your phone before booting into recovery, then add your password back after you're done flashing.
Click to expand...
Click to collapse
Thank you for this. I did quite a bit of searching last night and this morning but couldn't find anything on it. This makes sense and I'll give a try when I get home.
habicabi said:
Thank you for this. I did quite a bit of searching last night and this morning but couldn't find anything on it. This makes sense and I'll give a try when I get home.
Click to expand...
Click to collapse
I've try removing pin and it still ask for password. Any idea why? Having the same issues as you have.
Thanks
veedubrocks said:
I've try removing pin and it still ask for password. Any idea why? Having the same issues as you have.
Thanks
Click to expand...
Click to collapse
I removed the pin and when I went to fastboot boot twrp.img, it went right through without prompting for a password in TWRP.
You may need to reboot first, after the pin removal
habicabi said:
I removed the pin and when I went to fastboot boot twrp.img, it went right through without prompting for a password in TWRP.
You may need to reboot first, after the pin removal
Click to expand...
Click to collapse
Thanks. I just ADB sideload. Work perfectly
veedubrocks said:
Thanks. I just ADB sideload. Work perfectly
Click to expand...
Click to collapse
Awesome! Cheers!
Blech, re-signing in to every app with a fingerprint and resetting up fingerprints sounds like a drag
Am n the same boat i cant access none of my files including the no-dmverity.zip suppose to flash after booting twrp.img to flash twrp.zip
PuffDaddy_d said:
Yes, it's been mentioned a few times. Simply remove the password lock from your phone before booting into recovery, then add your password back after you're done flashing.
Click to expand...
Click to collapse
doesent work on galaxy s9/los15.1
Hey guys i know the Pixel Experience rom has been released for a long time, more information about this Pixel Experience rom https://forum.xda-developers.com/project-treble/trebleenabled-device-development/8-1-0-pixel-experience-t3796011
but unfortunately we could not boot on nokia devices after we flashed this rom
Congratulations that bootloop problem has been solved right now, we are not tired to flash roms
DOWNLOAD TWRP https://drive.google.com/open?id=1-e7zNrXp_mi468h-Zu1X5gbwQtgE17I6
follow these steps
1: unlock your bootloader
thank for @hikari_calyx
2: erase data/factory reset
3: connect your computer with adb and flash any roms based on project preble ( AOSP or RR )(why this step ? my friend told me that this twrp has a bug which can't boot recovery on official firmware)
Code:
fastboot flash system system.img
4: flash this TWRP supported project treble with
Code:
fastboot flash boot_a TWRP.img
Code:
fastboot flash boot_b TWRP.img
5: boot into the twrp
6: extract rom image from PE zip and download Magisk-v16.6.zip, after that move them to Internal Storage
7: format data and flash the Pixel Experience image, choose "System image" Notice: Don't do a reboot before flash Magisk.zip
8: flash the magisk.zip
9: wipe all data and reboot. Done !
Notice: you may see Your Device Is Uncertified when you intend to login Google on this device
Just Do This
Download and install Device ID.apk
copy your Google Service Framework ID
fill your GSF ID on this web and Clink on REGISTER
reboot some times you will be able to use google apps
btw all project treble roms do not include Adaptive brightness and Ambient display
fix them at here https://forum.xda-developers.com/project-treble/trebleenabled-device-development/overlay-enable-night-light-adaptive-t3741965
I'm on this rom for three days and every things go fine unless fingerprint control bug (that means you can control your phone easily with fingerprint)
thanks for viewing, sorry for my english is poor but I've been improving it, I wrote this GUIDE without translate tool
thanks for every member which develop the project treble rom and TWRP and something else
some amazing screenshots
The image does not load
12345wxj said:
The image does not load
Click to expand...
Click to collapse
什么？哪一个镜像不加载？
1452686579 said:
什么？哪一个镜像不加载？
Click to expand...
Click to collapse
我這邊圖片一個都加載不出來
I have a Little problem at step one ._.
No way to unlock BL?
Why is the TWRP upload locked behind a google drive link that you need to request access for?
pitt93 said:
I have a Little problem at step one ._.
No way to unlock BL?
Click to expand...
Click to collapse
there is a way. but you need to pay.
donjamal said:
there is a way. but you need to pay.
Click to expand...
Click to collapse
Do they accept ETH/BTC?
shubham412302 said:
Do they accept ETH/BTC?
Click to expand...
Click to collapse
i have no idea. i don't think so, you need to ask them. it's 5 dollars, they for sure accept paypal
Has anyone flashed this yet? This thread was the straw that broke the camel's back for me and I unlocked my bootloader today.
Now just waiting to hear if anyone other than the op has been successful with this guide.
Doktaphex said:
Why is the TWRP upload locked behind a google drive link that you need to request access for?
Click to expand...
Click to collapse
I don't know why. ? Maybe it is shared right now
Doktaphex said:
Has anyone flashed this yet? This thread was the straw that broke the camel's back for me and I unlocked my bootloader today.
Now just waiting to hear if anyone other than the op has been successful with this guide.
Click to expand...
Click to collapse
Trust me dude ,it works fine I and my Chinese friends tested this guide on Nokia 7 plus and Nokia 7
And there is anotber guide to flash pixel experience rom, but that mode is complex and sometimes does not work
1452686579 said:
Trust me dude ,it works fine I and my Chinese friends tested this guide on Nokia 7 plus and Nokia 7
And there is anotber guide to flash pixel experience rom, but that mode is complex and sometimes does not work
Click to expand...
Click to collapse
It might take me a couple of days as I am quite busy at the moment.
Thank you for your development for the Nokia 7 plus. Really appreciated.
Well, I installed the system image, but now my SIM is not recognized.
I will go through setup and see if the SIM works afterwards?
EDIT: No IMEI on SIM slot 1, there is an IMEI on slot 2 but this slot also does not work.
And of course, I did not do a backup of my working system. (You'd think I would have learned by now, but NO )
Doktaphex said:
Well, I installed the system image, but now my SIM is not recognized.
I will go through setup and see if the SIM works afterwards?
EDIT: No IMEI on SIM slot 1, there is an IMEI on slot 2 but this slot also does not work.
And of course, I did not do a backup of my working system. (You'd think I would have learned by now, but NO )
Click to expand...
Click to collapse
LOL always do backup man, i learned the hard way Please update if you got sim 1 to work!
sublimeace said:
LOL always do backup man, i learned the hard way Please update if you got sim 1 to work!
Click to expand...
Click to collapse
I got my entire system back up and running using the July patched boot image flashed into boot a and b and then sideloaded rollback zip etc, etc....
In general I have found that when I get my self into these situations, if I actually have a back up it ends up failing anyway.
It's always more fun walking the tightrope.
Anyway, both SIM slots are fine on stock ROM rooted with magisk, xposed etc.
I won't be flashing any treble images until I hear more success stories in that respect, I feel that our twrp still has some kinks that need to be ironed out.
9: wipe all data and reboot. Done ! you mean factory reset?
donjamal said:
there is a way. but you need to pay.
Click to expand...
Click to collapse
so, no way
Since I bought the phone a week ago and upgraded to miui 12, the phone just reboots randomly, does anyone know how to fix?
toros04 said:
Since I bought the phone a week ago and upgraded to miui 12, the phone just reboots randomly, does anyone know how to fix?
Click to expand...
Click to collapse
Have you done a reset after the update, if not do it.
NOSS8 said:
Have you done a reset after the update, if not do it.
Click to expand...
Click to collapse
I haven't done any restore, is it recommended
toros04 said:
I haven't done any restore, is it recommended
Click to expand...
Click to collapse
It's up to you, if you want to retrieve your sms and calls or if you have a lot of apps (not all data is saved).You can use Micloud or google.
even after resetting, the device continues to reboot
toros04 said:
even after resetting, the device continues to reboot
Click to expand...
Click to collapse
Ok,What version is your phone and which ROM is currently installed?
NOSS8 said:
Ok,What version is your phone and which ROM is currently installed?
Click to expand...
Click to collapse
miui 12.0.3 global
toros04 said:
miui 12.0.3 global
Click to expand...
Click to collapse
12.0.3 is not the latest V12.0.4.0.QJKMIXM is the latest android 10. And now V12.2.1.0.RJKMIXM android 11
try to update.
Otherwise you can flash it directly with miflash but you have to unlock the bootloadeer.
the problem is that I can not install it, both because manually from the phone it says that it cannot verify the rom I downloaded via zip, and through my flash, because to unlock it the bootload requires 160 hours. Now I have another 6 days before I can return, so I don't know what to do
toros04 said:
the problem is that I can not install it, both because manually from the phone it says that it cannot verify the rom I downloaded via zip, and through my flash, because to unlock it the bootload requires 160 hours. Now I have another 6 days before I can return, so I don't know what to do
Click to expand...
Click to collapse
In this case, either wait the time to unlock or return the phone to the seller.
you can try:create a folder at the root,rename it to "downloaded_rom" and put the zip inside. try update.
download zip here https://xiaomifirmwareupdater.com/miui/lmi/stable/V12.0.4.0.QJKMIXM/
NOSS8 said:
In this case, either wait the time to unlock or return the phone to the seller.
you can try:create a folder at the root,rename it to "downloaded_rom" and put the zip inside. try update.
download zip here https://xiaomifirmwareupdater.com/miui/lmi/stable/V12.0.4.0.QJKMIXM/
Click to expand...
Click to collapse
it doesn't work anyway
toros04 said:
it doesn't work anyway
Click to expand...
Click to collapse
1)Unlock bootloader flash miflash
2)Return the phone to the seller.
NOSS8 said:
1)Unlock bootloader flash miflash
2)Return the phone to the seller.
Click to expand...
Click to collapse
I have a question, could it be that the reboots were due to the deactivation of miui optimizations? Because after activating them, there seems to be no more random reboots
toros04 said:
I have a question, could it be that the reboots were due to the deactivation of miui optimizations? Because after activating them, there seems to be no more random reboots
Click to expand...
Click to collapse
It is possible, but why write "upgraded to miui 12, the phone just reboots randomly" because this parameter does not turn off by itself.
NOSS8 said:
It is possible, but why write "upgraded to miui 12, the phone just reboots randomly" because this parameter does not turn off by itself.
Click to expand...
Click to collapse
I had turned it off before, and it didn't give any problems, after the update it started to give these problems, that's why, I thought it could be this
toros04 said:
I had turned it off before, and it didn't give any problems, after the update it started to give these problems, that's why, I thought it could be this
Click to expand...
Click to collapse
You could have specified it and when you deactivate this parameter an alert message indicates "possible unstable system" and what is your problem? unstable system.