I'm not from the USA but somehow I got a SM-G930T instead of a SM-G930F, the current rom is global somehow but I want in the future(after the warranty is expired and rom is slow after a while) to get a new rom but I see that there is NO global rom for SM-G930T, can I get one or just go replace my device?
Related
I'm looking at upgrading from my Moto E4 and settled on the Galaxy S7 over the Pixel due to the MicroSD slot. I now have questions as to which version to get.
I understand that it's relatively simple to flash the unlocked firmware on any of the devices. Could I just simply find the cheapest, good shaped S7 and flash the unlocked firmware and be satisfied?
I'm currently on Sprint's 1-year free service promotion until September 2018. So Sprint compatibility is needed for a while. After that, I want the freedom to be able to hop back to AT&T or Verizon (or one of their MVNOs).
Should I just buy a Sprint S7 now, then when my service is up, flash the new firmware then? Or should I buy a T-Mobile version and flash the 930U firmware right away? The universal unlocked model is significantly more expensive, so I just want to make sure I'm covering all my bases.
Depends on your goals. Flashing via Odin is quite simple and easy for the S7, but the US models all have a locked bootloader. That means you can only flash stock firmware files, and nothing custom. No ROM's and no TWRP.
If you're happy with than then you're set, if not you'll need the international Exynos model, as it can be unlocked and flash custom.
Beanvee7 said:
Depends on your goals. Flashing via Odin is quite simple and easy for the S7, but the US models all have a locked bootloader. That means you can only flash stock firmware files, and nothing custom. No ROM's and no TWRP.
If you're happy with than then you're set, if not you'll need the international Exynos model, as it can be unlocked and flash custom.
Click to expand...
Click to collapse
no ROMs is OK with me. the exynos version won't work on my current provider, so can't go that direction anyway.
Was on ATT, unlocked, now on T-Mobile. Phone is 3 yrs old, sketchy; shuts off randomly, has issues. Want to flash firmware, but Sammobile doesn't have 915a. Since it's unlocked and on t-mobile network, can I flash with t-mobile firmware? Can you put any carrier's rom on an unlocked phone? Sammobile has "usa" firmware with no carrier designation.
https://www.sammobile.com/firmwares/galaxy-note-edge/SM-N915R4/USC/
Thanks.
How did it go??
Same phone same problem also on Tmobile now... what did you do??
Use firmware uploaded by makki666
drivesavw said:
Same phone same problem also on Tmobile now... what did you do??
Click to expand...
Click to collapse
Did you find a solution? I flashed the firmware uploaded by makki666 found in another thread on updates for Note Edge from at&t. Right now am using 6.0.1 but may revert to basic 5.1 1 to get temporary root & get rid of bloatware (have not figured out what is worse, outdated OS or bloatware). If you found a better solution, please posr
Ok, so my question ha a few points here. I have been flashing roms for many years but never really though of this until recently as I now have an unlocked phone.
1. As my Sprint Note 5 is unlocked, can I flash say the Unlocked Version of software to the phone taking away carrier branding? I manage a store from another carrier and I hate that when I boot my phone it shows Sprint. I know it will not trip knox as long as it is Official Stock software.
2. If I do flash said Unlocked version software replacing Sprint software, will it change my connection at all? I have seen that flashing ATT software on a Verizon device did manage to improve ATT tower connection however I wonder if this is maybe a placebo effect as opposed to actually changing the bands and connections the device makes.
If you guys could help me out that would be great. :good:
Cheers
There is no unbranded firmware for the Sprint model because well, it is a exclusive model so even if you flash XAS instead of SPR firmware some or all apps will still appear. The only way to get rid of everything Sprint is via custom ROM= tripped KNOX. The SM-N920P cannot run another firmware.
Hello.
I have a Galaxy S7 that I got about 5 weeks ago. I paid to have it in the box but the person got a secondhand one. I am in West Africa but someway somehow I got a Verizon one that is unlocked for any carrier. Anyway I checked and some functions were not working. Private mode is not working, there's no software update option anywhere (I checked developer mode) and some features I've seen on YouTube are not even on the phone. I'm stuck on Android 6 and can't update so I made up my mind to flash a custom ROM but turns out Verizon's bootloader is locked which will make such a task impossible. Some days ago though, I found out that official Verizon ROMs can be flashed without unlocking the bootloader and this raised some questions which I want to ask here.
Here's the info at the about phone page
MODEL NUMBER - SM-G930V (there's Verizon on the back of the phone so I think this is true)
ANDROID VERSION - 6.0.1
BASEBAND VERSION - G930VVRU4API3
BUILD NUMBER - MMB29M.G930VVRU4API3
1. Can I really flash a stock Verizon ROM for the Galaxy S7 without bricking my phone and with a locked bootloader?
2. If I were to flash a stock Verizon ROM will the phone be locked to Verizon again? I'm asking this because this is the only phone I have and I'm supposed to use this for 2 years!
3. Should I flash the same baseband version or will another Verizon one work?
4. If all the above questions are true, where can I get official Verizon stock ROM for my device?
If you have any questions for me please let me know.
Thanks
TheMannyzaur said:
Hello.
I have a Galaxy S7 that I got about 5 weeks ago. I paid to have it in the box but the person got a secondhand one. I am in West Africa but someway somehow I got a Verizon one that is unlocked for any carrier. Anyway I checked and some functions were not working. Private mode is not working, there's no software update option anywhere (I checked developer mode) and some features I've seen on YouTube are not even on the phone. I'm stuck on Android 6 and can't update so I made up my mind to flash a custom ROM but turns out Verizon's bootloader is locked which will make such a task impossible. Some days ago though, I found out that official Verizon ROMs can be flashed without unlocking the bootloader and this raised some questions which I want to ask here.
Here's the info at the about phone page
MODEL NUMBER - SM-G930V (there's Verizon on the back of the phone so I think this is true)
ANDROID VERSION - 6.0.1
BASEBAND VERSION - G930VVRU4API3
BUILD NUMBER - MMB29M.G930VVRU4API3
1. Can I really flash a stock Verizon ROM for the Galaxy S7 without bricking my phone and with a locked bootloader?
2. If I were to flash a stock Verizon ROM will the phone be locked to Verizon again? I'm asking this because this is the only phone I have and I'm supposed to use this for 2 years!
3. Should I flash the same baseband version or will another Verizon one work?
4. If all the above questions are true, where can I get official Verizon stock ROM for my device?
If you have any questions for me please let me know.
Thanks
Click to expand...
Click to collapse
Yes, you can flash Verizon stock firmware without issues, as long as you are not trying to flash an older Verizon stock firmware than the version you already have. In other words, you can upgrade, but you can't downgrade.
As for flashing a west African firmware, Nn, Verizon devices have a locked bootloader, the locked bootloader will not allow you flash anything except Verizon stock firmware. Attempting to flash anything from another region or from a different device will only result in a soft-bricked or hard-bricked device. You can only flash the Verizon stock firmware for your specific model number.
Sent from my SM-S767VL using Tapatalk
Droidriven said:
Yes, you can flash Verizon stock firmware without issues, as long as you are not trying to flash an older Verizon stock firmware than the version you already have. In other words, you can upgrade, but you can't downgrade.
As for flashing a west African firmware, Nn, Verizon devices have a locked bootloader, the locked bootloader will not allow you flash anything except Verizon stock firmware. Attempting to flash anything from another region or from a different device will only result in a soft-bricked or hard-bricked device. You can only flash the Verizon stock firmware for your specific model number.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
Hi! Thanks for replying! So where can I get a Verizon stock firmware that is an upgrade of mine and what region should I download from? Also which version of ODIN should I use?
Thank you very much!
Hello, I would like to preface this by saying that I don't actually live in the US. I got this used unlocked AT&T Galaxy S21+ a few months back and an issue I noticed after using it for a while was the fact I was not receiving any OTA updates due to the fact I was not using an AT&T SIM card.
Now I want to switch AT&T to carrier-free firmware where I will be able to get regular OTA updates automatically
My current specs:
Model: SM-G996U
chip: Snapdragon 888
Baseband version : G996USQU1ATLF
CSC : G996UOYN1ATLF
AP/CP : G996USQU1ATLF
Is it suitable for installation?
https://www.sammobile.com/samsung/g.../SM-G996U/USC/download/G996USQU5CVDB/1640229/
N.B/: May doing this flash will brick or damage my phone?
On SamMobile, underneath my device model, there list of several firmware labeled with different US carriers. As long as the firmware I flash is under the model number I have (SM-G996U), nothing should break, right?
Please suggest me firmware. I want to get rid of carrier barrier and want to get regular updates automatically safely.
Did you try the rom? I have the same problem
OTA is CSC based. You'd have to use Samkey to unlock the CSC to a unlocked US one.
Flash the u1 xaa firmware. Works on my phone in canada
I have a similar issue!
So I received a refurbished S21+, it is unlocked and all but it has AT&T bloatware and I can't update to oneui 5.0... I live in italy but this phone comes from Germany and apparently has a US AT&T firmware (SM-G996U-OYN-ATT). I was following a tutorial with odin to flash to SM-G996B with ITV, which is the italian version with android 12 and oneui 4.1.1 is it safe to do so and then get the android 13 update the standard way? Could I straight up get android 13 and oneui 5 flashing the most recent rom or is it even worse?
The other solution I thought about is that I could just get the U1 XAA, but i have U for now and I don't quite understand if it's completely risk free or not.
Shohan112 said:
Hello, I would like to preface this by saying that I don't actually live in the US. I got this used unlocked AT&T Galaxy S21+ a few months back and an issue I noticed after using it for a while was the fact I was not receiving any OTA updates due to the fact I was not using an AT&T SIM card.
Now I want to switch AT&T to carrier-free firmware where I will be able to get regular OTA updates automatically
My current specs:
Model: SM-G996U
chip: Snapdragon 888
Baseband version : G996USQU1ATLF
CSC : G996UOYN1ATLF
AP/CP : G996USQU1ATLF
Is it suitable for installation?
https://www.sammobile.com/samsung/g.../SM-G996U/USC/download/G996USQU5CVDB/1640229/
N.B/: May doing this flash will brick or damage my phone?
On SamMobile, underneath my device model, there list of several firmware labeled with different US carriers. As long as the firmware I flash is under the model number I have (SM-G996U), nothing should break, right?
Please suggest me firmware. I want to get rid of carrier barrier and want to get regular updates automatically safely.
Click to expand...
Click to collapse
I'm having the same issue with my Samsung S20 Ultra 5G SM-G988U i bought the device yesterday and it accept my local Sim here but the issue is that there is limited features, for example I can't turn On/off my mobile data on and I can't change network mode like selecting from 4G to 5G