Database Info

[REF]Nexus Player Stock OTA URLs

Introduction:
This is a list of all known OTA's for the Nexus Player
Click to expand...
Click to collapse
File List:
LRX21M → LRX21V
LTW87L → LRX21V
See ASUS Nexus Player # Official ROMs - XDA Wiki for a list of files
Click to expand...
Click to collapse
How to flash:
Requirements:
Stock recovery
Unmodified /system
Unmodified /oem
Unlocked bootloader
Basic understanding of command line/shell
Unlock your bootloader
Download and set up adb and fastboot
Reboot into fastboot mode
Open up a command prompt/shell where you saved fastboot
enter into command prompt/shell: "fastboot oem unlock"
Enter recovery mode via onscreen buttons
Enable recovery ui
(How do you do this for this device?)
Set up adb
Select apply update from adb
enter into command prompt: "adb sideload <path to saved update.zip>
Click to expand...
Click to collapse
FAQ:
How to find the ota?
If you're rooted, wait for the device to prompt you to update, then check /cache for the file
If you're not rooted, wait until the same time and do an adb logcat and look for a line with .zip in it
Why isn't the latest ota listed?
We can only list what we have, if the ota from Build X to Build Y isn't listed, we dont have the file for it yet.
How do you setup adb/fastboot
Please read the stickies in the general subforum, this is not a formal guide
Do I need to unlock the bootloader to flash the update zip?
Yes, if you wish to do it manually.
If you allow android to prompt for the update, you do not need to unlock
Can I flash this if I have a custom rom?
No, you must be on a unmodified rom
Can I flash this if I'm rooted?
No, rooting modifies /system.
Click to expand...
Click to collapse
Credits:
Click to expand...
Click to collapse
Changelog:
Nov 29, 2014: Added LRX21V
Nov 18, 2014: Added LTW87L → LRX21M
Oct 15, 2014: Initial page
Click to expand...
Click to collapse
2char

Can Nexus Player images be loaded and bootted on a similarly specced Intel Atom based PC?

kettal said:
Can Nexus Player images be loaded and bootted on a similarly specced Intel Atom based PC?
Click to expand...
Click to collapse
It's too soon to tell and it depends on what the bootloader allows for it.
Just because goog might include one that isnt locked down, it doesnt mean it's automatically bios or uefi complient.
Loading linux on it is one thing, but expecting it to work like a normal pc with linux or even windows isnt something you can assume.
Goog's bootloaders are not all universally uefi complient even though other similar devices include them (winrt/wp8/assorted android devices have complient bootloaders)
Also, this is off topic for this thread.

https://groups.google.com/forum/?hl=en&nomobile=true#!topic/android-building/bm3iwCrjO2s said:
Hi all,
Builds for Android 5.0 have been released.
The following are the builds, tags, and devices supported:
- LRX21M, android-5.0.0_r2, Nexus Player fugu
- LRX21L, android-5.0.0_r1, Nexus 9 volantis
Additional devices support are coming soon.
Thanks!
bill
Click to expand...
Click to collapse
The NP will also have an ota before release.

Factory image posted:
https://developers.google.com/android/nexus/images#fugu
Version: 5.0 (LRX21M)
Download: Link
MD5 Checksum: b5380180959cdf8b99a24339b4800b64
SHA-1 Checksum: aeed3bef8331aba50c94c188ce3753d3ae9afd83

TheManii said:
The NP will also have an ota before release.
Click to expand...
Click to collapse
There is an ota from LTW87L → LRX21M, I do not have the ota yet.
Also: the NP is unlockable without having to go to setting first, unlike the N6/N9: PSA: OEM Unlock On The Nexus 6 And 9 Requires Checking A Box In Developer Options

Update: PSA: New Lollipop OTA Procedure On Nexus Devices Means Your Update Will Fail If Your System Is Modified In Any Way At All
For future otas, rooting will not break your ability to ota (rooting itself wont, if you modify files you will still break ota due to that)
The NP's kernel does not have dm-verity / secure /system enabled, and it must be enabled prior to the first OTA to stay consistant. (technical note, it's still possible to deploy consistant/secure /systems without it, but the kernel itself wont bother checking, so it's unlikely an issue at all)
Goog can still deploy it after the fact, but it would require a full rom ota instead of merely a delta/patch ota, this is highly unlikely to happen.
This will be reconfirmed once I have the file and url for the first ota.
Edit: see below

Update: LTW87L → LRX21M
The NP does use secure /system otas, ROOTING WILL BREAK OTAS.
If you are rooted or have modified your /system in any way, you will need to use factory images to update

LTW87L → LRX21V
LRX21M → LRX21V

URL for the 5.1.1 OTA
http://android.clients.google.com/p...6.signed-fugu-LMY47V-from-LMY47D.99b5efed.zip

MPZ44Q to MPZ79N OTA zip
Here is the zip for upgrading the first Android M preview to the Dev preview
Sorry for sort-of breaking the rules. Links are in the attached text file.

doesn't sound like this ota url thread is really being maintained anymore, but anyways....Nov security patch:
https://android.googleapis.com/pack...d2918bc567.signed-fugu-MRA58N-from-MRA58K.zip

Sourced from jduck:
https://android.googleapis.com/pack...5af.signed-signed-fugu-MMB29U-from-MMB29T.zip
MMB29U-from-MMB29T

MMB29V-from-MMB29U
Code:
https://android.googleapis.com/packages/ota/google_fugu_fugu/8793bbdb81c005f5cb0f2a224b20e03365e0a974.signed-fugu-MMB29V-from-MMB29U.zip

MOB30D from MMB29V
https://android.googleapis.com/pack...afd.signed-signed-fugu-MOB30D-from-MMB29V.zip

MOB30W from MOB30P
https://android.googleapis.com/pack.../0825452c453e9fa32a2988c6fce122c530e8654d.zip
by Jduck

Moto X Play (India) Official Marshmallow 6.01 OTA Download Link

Hi All
Today I am releasing Moto X Play (India) Official Marshmallow 6.01 OTA ZIP File. This was released by Motorola for Indian Version of Moto X Play. Get your hands dirty and share your feedback. :laugh:
Mega - Download
MediaFire - Download
GitHub - Download
This OTA Update can be applied ONLY on Android 6.0 Build MPD24.65-18 and will be updated to Android 6.01 Build MPD24.107-52. Detailed info on new update can be read at Motorola Forum
==================================================
Filename : Blur_Version.24.61.52.lux_retasia_ds.retasiaall.en.03.zip
MD5 : 1646ecaa99392fd8507abab218a60b95
SHA1 : ba4c6f578e6cb3f1348738b59a5899348a765786
CRC32 : 0a024399
SHA-256 : 877a3f9eca01c45b37da8e2f2abf89650f081122683f141b638690309403ad8e
SHA-512 : 4ac7d32df70e8525c49184729d55cf82604be826251aa1cddcbc9b66553c0a19cdf5bf2cf819e745ebec144a28ddd6fc96066b28593bfa6119cd758c87c1ee85
SHA-384 : 86b3ac3bc98066c76e0fc0a3d5711770b17176b067bf015cec28c9ea760ff0bd4ec27cda04d4c2b5799292acb9d3c3d9
Modified Time : 23-Mar-2016 11:44:31
Created Time : 23-Mar-2016 11:45:47
File Size : 406,244,549
Extension : zip
File Attributes : A
Model : Indian XT1562 100% [ Unsure if it will be compatible with other regions and variations of handset ]
==================================================
Results Reported By Users
EU Version - Success As Reported By ndrsgan
Steps To Update To Android 6.01
Save the downloaded file to Root of SD Card and follow instructions :
Method 01
Just Save the downloaded file to Root of SD Card [External Memory Card and not Internal Memory] and go to Settings --> About Phone --> System Updates. Update will be auto recognized and user will be prompted to apply update. In case update is not recognized and do not get any update prompt, then try Method 02.
Method 02 :
With the phone powered off, press and hold the Volume Down button and the Power button at the same time until the device turns on.
Press the Volume Down button to highlight "Recovery mode"
Press the Power button to restart into Recovery mode.
You'll see an image of an Android robot with a red exclamation mark.
While holding down the Power button, press the Volume Up button.
Phone will auto reboot to Recovery Mode.
Using Volume Down Button highlight Apply update from SD Card and press Power Button.
From the contents of SD Card Listed, using Volume Up / Down button select dowloaded .zip File and press Power Button.
Updatation Process will start. It will take about 30 Mins to complete updatation.

My Australian build number matches so I will give this a go when the link is live.

Link Is Live
bambalam said:
My Australian build number matches so I will give this a go when the link is live.
Click to expand...
Click to collapse
Mega link is live. Enjoy :laugh: :fingers-crossed:

Thanks i try it with the german Version

Timate5 said:
Thanks i try it with the german Version
Click to expand...
Click to collapse
Thanks. Do Let me know your build number and result. I will update thread with your inputs and it will help others as well.

My BUILD number is 24-65-18 but dont work the ota recures retasia 6.0 i have reteu so i need to wait

XDASNR said:
Thanks. Do Let me know your build number and result. I will update thread with your inputs and it will help others as well.
Click to expand...
Click to collapse
I've updated with your file, and all ok... I have an EU moto x play, but when I updated to 6.0, I changed to the indian version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ndrsgan said:
I've updated with your file, and all ok... I have an EU moto x play, but when I updated to 6.0, I changed to the indian version.
Click to expand...
Click to collapse
I dont think it should matter much. I have read on forum many in EU have RETASIA Firmware Out Of The Box. The Only Difference should be in Modem Files but phone calls should not be affected.
Few have used RETASIA Firmware in France and Germany without any Issues. I Wonder it is same in your case else you can download and flash EU Stock 6.01. As far as i know, bootloader need not be unlocked when flashing Stock.

XDASNR said:
I dont think it should matter much. I have read on forum many in EU have RETASIA Firmware Out Of The Box. The Only Difference should be in Modem Files but phone calls should not be affected.
Few have used RETASIA Firmware in France and Germany without any Issues. I Wonder it is same in your case else you can download and flash EU Stock 6.01. As far as i know, bootloader need not be unlocked when flashing Stock.
Click to expand...
Click to collapse
yes, I want to say that the file works fine. I have the indian firmware (6.0) since one month ago, and I haven't had any problem. With 6.0.1, at this moment, any problem... I have green network, not red as most people report in EU.

ndrsgan said:
yes, I want to say that the file works fine. I have the indian firmware (6.0) since one month ago, and I haven't got any problem. With 6.0.1, at this moment, any problem... I have green network, not red as most people report in EU.
Click to expand...
Click to collapse
Thanks.

Link doesn't work for me. BSNL is my ISP. Any other links?

New Download Site Added
lokesh.acm said:
Link doesn't work for me. BSNL is my ISP. Any other links?
Click to expand...
Click to collapse
MediaFire Link Added

XDASNR said:
Hi All
Today I am releasing Moto X Play (India) Official Marshmallow 6.01 OTA ZIP File. This was released by Motorola for Indian Version of Moto X Play. Get your hands dirty and share your feedback. :laugh:
Mega - Download
MediaFire - Download
This OTA Update can be applied ONLY on Android 6.0 Build MPD24.65-18 and will be updated to Android 6.01 Build MPD24.61-52. Detailed info on new update can be read at Motorola Forum
==================================================
Filename : Blur_Version.24.61.52.lux_retasia_ds.retasiaall.en.03.zip
MD5 : 1646ecaa99392fd8507abab218a60b95
SHA1 : ba4c6f578e6cb3f1348738b59a5899348a765786
CRC32 : 0a024399
SHA-256 : 877a3f9eca01c45b37da8e2f2abf89650f081122683f141b638690309403ad8e
SHA-512 : 4ac7d32df70e8525c49184729d55cf82604be826251aa1cddcbc9b66553c0a19cdf5bf2cf819e745ebec144a28ddd6fc96066b28593bfa6119cd758c87c1ee85
SHA-384 : 86b3ac3bc98066c76e0fc0a3d5711770b17176b067bf015cec28c9ea760ff0bd4ec27cda04d4c2b5799292acb9d3c3d9
Modified Time : 23-Mar-2016 11:44:31
Created Time : 23-Mar-2016 11:45:47
File Size : 406,244,549
Extension : zip
File Attributes : A
Model : Indian XT1562 100% [ Unsure if it will be compatible with other regions and variations of handset ]
==================================================
Results Reported By Users
EU Version - Success As Reported By ndrsgan
Steps To Update To Android 6.01
Save the downloaded file to Root of SD Card and follow instructions :
Method 01
Just Save the downloaded file to Root of SD Card [External Memory Card and not Internal Memory] and go to Settings --> About Phone --> System Updates. Update will be auto recognized and user will be prompted to apply update. In case update is not recognized and do not get any update prompt, then try Method 02.
Method 02 :
With the phone powered off, press and hold the Volume Down button and the Power button at the same time until the device turns on.
Press the Volume Down button to highlight "Recovery mode"
Press the Power button to restart into Recovery mode.
You'll see an image of an Android robot with a red exclamation mark.
While holding down the Power button, press the Volume Up button.
Phone will auto reboot to Recovery Mode.
Using Volume Down Button highlight Apply update from SD Card and press Power Button.
From the contents of SD Card Listed, using Volume Up / Down button select dowloaded .zip File and press Power Button.
Updation Process will start. It will take about 30 Mins to complete updatation.
Click to expand...
Click to collapse
Are you sure that the updated Build Number on 6.0.1 is MPD24.61-52 and not MPD24.107-52... Checking over at https://github.com/motoxplay/stock the new build on OTA as well as full Stock firmware is MPD24.107-52 not the one you're refering to...

Should my phone be rooted to flash this??

siddharthnair96 said:
Are you sure that the updated Build Number on 6.0.1 is MPD24.61-52 and not MPD24.107-52... Checking over at https://github.com/motoxplay/stock the new build on OTA as well as full Stock firmware is MPD24.107-52 not the one you're refering to...
Click to expand...
Click to collapse
Well this time Build Number and System Number is not same!! System Number is 24.61.52 and Build Number is MPD24.107-52. BTW Thanks for raising this up; I have updated my posted to include Build Number and not System Number.

the_harsh said:
Should my phone be rooted to flash this??
Click to expand...
Click to collapse
No, it mustn't.

I have a rooted play with twrp and xposed framework installed.. Could someone explain how to update?

Uninstall xposed, unroot, flash stock recovery.

How do i unroot without losing data or flashing a stock rom

Gauravpreet said:
How do i unroot without losing data or flashing a stock rom
Click to expand...
Click to collapse
There already a TWRP release of 6.01. Just download and follow instructions. Typically all you have to do is boot to TWRP and select restore the newly downloaded firmware. Its that simple. Dont get in trap of unroot and all. Its a OTA Update and will check for system integrity which you must have lost and fail.
Just use the search function of XDA. You will be amazed with results. Just in case you dont, lemme know to get you the link.

Moto X Play (India) Official Nougat 7.1.1 OTA Download Link

Hi All
Today I am releasing Moto X Play (India) Official Nougat 7.1.1 OTA ZIP Files :laugh:. These were released by Motorola for Indian Version of Moto X Play during Soak Test and is currently on-going. There are few bugs to be fixed; however stable enough for release and daily usage. Any new updates from Motorola will be updated here as and when released.
After installation of 5th OTA, your phone should be updated to below version :
System Version : 26.31.1
Build Number : NPD26.48-24-1
Android Security Patch Level : 1 September 2017 :laugh:
Below is the sequence in which updates have to be applied. An update can be installed ONLY if existing version matches given after file name below. Note you can directly install a version and skip previous builds if your existing build matches one given below. Example : If your current build is 7.1.1/NPD26.48-8/8, can skip to install 01 and 02; directly install 03-05.
01. Blur_Version.26.1.42.lux_retasia_ds.retasiaall.en.03.zip if build is "ro.build = 6.0.1/MPDS24.107-70-1-5/5" OR "ro.build = 7.1.1/NPD26.42/34"
02. Blur_Version.26.21.8.lux_retasia_ds.retasiaall.en.03.zip if build is "ro.build = 7.1.1/NPD26.42/34" OR "ro.build = 7.1.1/NPD26.48-8/8"
03. Blur_Version.26.21.16.lux_retasia_ds.retasiaall.en.03.zip if build is "ro.build = 7.1.1/NPD26.48-8/8" OR "ro.build = 7.1.1/NPD26.48-16/16"
04. Blur_Version.26.21.24.lux_retasia_ds.retasiaall.en.03.zip if build is "ro.build = 7.1.1/NPD26.48-16/16" OR "ro.build = 7.1.1/NPD26.48-24/24"
05. Blur_Version.26.31.1.lux_retasia_ds.retasiaall.en.03.zip if build is "ro.build = 7.1.1/NPD26.48-24/24" OR "ro.build = 7.1.1/NPD26.48-24-1/1"
Download Links :
Dailyuploads.net -
01. Blur_Version.26.1.42.lux_retasia_ds.retasiaall.en.03.zip [760 MB]
02. Blur_Version.26.21.8.lux_retasia_ds.retasiaall.en.03.zip [78.9 MB]
03. Blur_Version.26.21.16.lux_retasia_ds.retasiaall.en.03.zip [46.6 MB]
04. Blur_Version.26.21.24.lux_retasia_ds.retasiaall.en.03.zip [41.6 MB]
05. Blur_Version.26.31.1.lux_retasia_ds.retasiaall.en.03.zip [15.6 MB]
Mega.nz -
01. Blur_Version.26.1.42.lux_retasia_ds.retasiaall.en.03.zip [760 MB]
02. Blur_Version.26.21.8.lux_retasia_ds.retasiaall.en.03.zip [78.9 MB]
03. Blur_Version.26.21.16.lux_retasia_ds.retasiaall.en.03.zip [46.6 MB]
04. Blur_Version.26.21.24.lux_retasia_ds.retasiaall.en.03.zip [41.6 MB]
05. Blur_Version.26.31.1.lux_retasia_ds.retasiaall.en.03.zip [15.6 MB]
Zip Files Checksum
==================================================
Filename : 01. Blur_Version.26.1.42.lux_retasia_ds.retasiaall.en.03.zip
MD5 : 8d1677c757087ad49af9211ff454945e
SHA1 : a751aadad8662c5a5a6f5a630aeb37426b95be15
CRC32 : 2610d0c7
SHA-256 : 1572a567ef5054a735b794b7e65bffd36a7cfa78fdf5eda24c56f058970d0b37
SHA-512 : 4e76ce5e7519a220d2fb15cec0d9414cebbb0d44b15412026c5bb08fa7d614da06720c8c5b55d534f9c5a5c26bb815c745325acc74b75fda697e1179d72cc6b8
SHA-384 : bc7534a90e72a4e2c1afc00c14106dfa6054ab0a8d824fbcd5e8b095331059703da78316eb421e64e9cc8f46c7d51c0e
File Size : 797,595,918
Extension : zip
==================================================
==================================================
Filename : 02. Blur_Version.26.21.8.lux_retasia_ds.retasiaall.en.03.zip
MD5 : 4dbfe38e3aace6d148de1557e6ea512e
SHA1 : 1174d4698e9ff4c2408d3dfb09ce48faef55fbc2
CRC32 : 4c56a95b
SHA-256 : c7f4f0fe8a12c9d05c6b5349347037f3072f19895fc78cfeeaa46e11ab6e32b1
SHA-512 : f555918c8c8e784bf30281258d5a89a355d6dd81571373a8d5cdbce4dcdf6f9d2439988d139044213dd78091be20f0a6bb024fdad53ac3448d079fcecf9c10c6
SHA-384 : f993c846fd012ee647a0bb708f1a7e524dd922eee821b54d3dce06be67275aca6f891b300d98d09a2e3f1bd102cb1375
File Size : 82,813,245
Extension : zip
==================================================
==================================================
Filename : 03. Blur_Version.26.21.16.lux_retasia_ds.retasiaall.en.03.zip
MD5 : 664ecff177e4c14da476ed405c23f289
SHA1 : 0f490c52f176387cb3abd712aa2a02f511621097
CRC32 : 02702ede
SHA-256 : 28d33ed8da0a0da513257d4d32d805546b9157657dbaad9324c59c00715ab4b7
SHA-512 : 7b4fd6881a9bc1ca872ab1e66f46d9001c5d0668708d5855371379df8a62f1125251d79b79f7393916767b0edbdead0569200d39596df6e3d56f9b7d86af3669
SHA-384 : f2343aa4a36d54344819c08c6697386c147b5831968974bf14588d50fb6cc3e4b56963ff4414e913d3caf6815ff67d31
File Size : 48,914,241
Extension : zip
==================================================
==================================================
Filename : 04. Blur_Version.26.21.24.lux_retasia_ds.retasiaall.en.03.zip
MD5 : b0225339c14141e5ffb67c83c710f4c9
SHA1 : b62ec2fcd4113cd974a9984e3179d6892296d0f3
CRC32 : 9cc9c5b0
SHA-256 : 10fadca67babd93b621929c0bd16d13e3f01a2c3cd30fc2b7e4fe110b1f867e9
SHA-512 : baa95d79b36060dc24e358f6abbeffb8cc411636e08cc9a1a2fd9e8e24b2d931eae6ef97f9150e7cbd11d7dbfc31ce29ada7bdeab1621ccc9e33e62853e7d72e
SHA-384 : c2a4998e05270eecaa7d873d8683d88b8dd78a7a48308eba690bd473aaa67b85250cfe2e2f1beafe1c755ee56239b6a4
File Size : 43,724,857
Extension : zip
==================================================
==================================================
Filename : 05. Blur_Version.26.31.1.lux_retasia_ds.retasiaall.en.03.zip
MD5 : 699ac49664ea5629f437b0477107ac2b
SHA1 : 7c317dbd42f6aa332412bee7784998b4e7d50816
CRC32 : 0a208184
SHA-256 : bc40f8796fda899154105d509fa7ea8e8db32816dce5245892d02186400a1abd
SHA-512 : 07f167d514335396f6c4ea6c540b7d67b2ece55284e57a8f70ec4303393746e64feab46fb185118effab3406c35e7128cec9442f16366e942f6618224de58dee
SHA-384 : 98011bee82a697b256de5f6d1b4c5b267f6429deb5ca8e7684befa612033c074e2007dc78345021da7eded18cb3d66bc
File Size : 16,408,621
Extension : zip
==================================================
FAQs :
01. Why am i releasing these after 2 months of Soak Test ?
Well, first few releases were very buggy, unstable and unusable. I decided to wait until Motorola (Lenovo) fixes them. Now that major issues have been fixed, i am releasing the files so that everyone can start using Android 7.1.1 and before the handset reaches is EOL. Motorola (Lenovo) are very slow to fix the issues and i dont expect the Soak to be completed soon. So why to suffer for their inefficiency ? Now it can be used as daily driver.
02. What are the known issues pending to be fixed ?
Few prominent users reported issues to be fixed are - Random shutdown (minor users facing it), high battery consumption (everyone), network issues (few users facing it, VoLTE issue has been fixed), scaling of graphics on lock screen (minor users facing it), vibration on receipt of notifications during call (everyone, actually Motorola (Lenovo) terms it feature instead of bug though Google has fixed in AOSP).
03. Will i get Official Download and Updates ?
This is an Official Update from an Unofficial Source. Why will you receive the same update twice No modifications have been done to these files. You will get any future OTAs Motorola (Lenovo) releases.
Steps To Update To Android 7.1.1
Save the downloaded files to Root of SD Card and follow instructions :
Method 01
Just Save the downloaded file to Root of SD Card [External Memory Card and not Internal Memory] and go to Settings --> About Phone --> System Updates. Update will be auto recognized and user will be prompted to apply update. In case update is not recognized and do not get any update prompt, then try Method 02.
Method 02 :
With the phone powered off, press and hold the Volume Down button and the Power button at the same time until the device turns on.
Press the Volume Down button to highlight "Recovery mode"
Press the Power button to restart into Recovery mode.
You'll see an image of an Android robot with a red exclamation mark.
While holding down the Power button, press the Volume Up button.
Phone will auto reboot to Recovery Mode.
Using Volume Down Button highlight Apply update from SD Card and press Power Button.
From the contents of SD Card Listed, using Volume Up / Down button select downloaded .zip files in order (01, 02) and press Power Button to apply update.
Updatation Process will start. It will take about 30 Mins to complete updatation.
Caution : You have to apply updates one after another in serial order else update will not be applied. At Worst, you may end up with bricked handset.
Regards
XDASNR

whether i hv to download all d files?

rohitpaul9000 said:
whether i hv to download all d files?
Click to expand...
Click to collapse
Yes.. Motorola (Lenovo) has released 5 updates so far, each fixing bugs and increasing the system version.

XDASNR said:
Yes.. Motorola (Lenovo) has released 5 updates so far, each fixing bugs and increasing the system version.
Click to expand...
Click to collapse
if i put all the files in sd card will it update in sequence automatically or i have to put one file at a time????
---------- Post added at 06:02 PM ---------- Previous post was at 05:38 PM ----------
any bugs? and what about battery backup????
can i root it?

read the op and you will receive answers...

Has anyone tested?

I thought to give it a try.
First I backuped my phone, and flashed stock Indian rom and latest OTA update I had. (Mind that my device is a european XT1562 on which I have flashed Indian firmware in order to enable dual sim functionality).
Then I tried to flash the first .zip file via stock recovery, and all I got was error (status 7). It said that "package expects build fingerprint of ... MPDS24.107-70-1-5 or NPD26.42 and mine was MPDS24.107-52-11.
After searching the forum, I found a twrp backup of that exact version I needed(MPDS24.107-70-1-5)
So I just booted twrp recovery without flashing it on the phone, and restored the backup I downloaded.
Afterwards I rebooted to stock recovery and tried to flash the first zip, which again failed and I got the same message.
My system version was indeed MPDS24.107-70-1-5 at the time.
So I gave up and restored my perfectly working 6.0.1 setup.
Thanks for sharing the OTAs, but I had no luck installing them.
I guess I have to wait.

does not recognize ota
What version of the system do I need to have installed to be able to install the otas?
download from this thread " https://forum.xda-developers.com/mo...official-7-1-1-nougat-factory-update-t3626387 " and does not recognize them

2017-09-11--02-10-03_npd26.48-24-1_retasia_ds
mark_kou said:
After searching the forum, I found a twrp backup of that exact version I needed(MPDS24.107-70-1-5)
So I just booted twrp recovery without flashing it on the phone, and restored the backup I downloaded.
Afterwards I rebooted to stock recovery and tried to flash the first zip, which again failed and I got the same message.
Click to expand...
Click to collapse
Not a surprise! You need recovery and modem to be of latest version too.
But I really don't recommend to mess with OTA because you risk to get bricked. It's easy and unforgettable )
Ok folks, I'm pretty familiar with this stuff, here is ready to flash restore TWRP-backup 7.1.1 NPD26.48-24-1 for RETASIA DS model (modem and recovery also supplied). If you got different model, leave your native 6.0.1 modem on place.

I have 1 doubt , Afaik Moto never released soak ota to non soak member ,so what happen if we apply this ota and By chance Moto release 1 more ota to soak members . We will stuck on this version will be fully dependent on someone to leak that also . And aside you I don't see anyone doing this .

After installing all 5 of the updates , will the moto dev apps like Moto Survey , Perf Monitor , PM Test etc will be there or not..?

s5610 said:
Not a surprise! You need recovery and modem to be of latest version too.
But I really don't recommend to mess with OTA because you risk to get bricked. It's easy and unforgettable )
Ok folks, I'm pretty familiar with this stuff, here is ready to flash restore TWRP-backup 7.1.1 NPD26.48-24-1 for RETASIA DS model (modem and recovery also supplied). If you got different model, leave your native 6.0.1 modem on place.
Click to expand...
Click to collapse
After restore your backup, i still have to aply all the OTA updates?!:good:

martt said:
After restore your backup, i still have to aply all the OTA updates?!:good:
Click to expand...
Click to collapse
Of course not. I did all dirty job to rework OTA into ready to use 7.1.1 fresh build (final even, maybe )
Unlock needed, TWRP backup/restore experience, etc. You have to be at medium android-fu level. Please, read a bit about OTA risks
---------- Post added at 03:23 AM ---------- Previous post was at 03:21 AM ----------
debanildas said:
After installing all 5 of the updates , will the moto dev apps like Moto Survey , Perf Monitor , PM Test etc will be there or not..?
Click to expand...
Click to collapse
You mix up leaked development beta build, and public release candidate, that was just dumped and shared.

del post. its old

avi_loveindia said:
We will stuck on this version
Click to expand...
Click to collapse
Until you have locked bootloader, or RSD service ROM 7.1.1 will leak. It should happen, I'm sure.

avi_loveindia said:
I have 1 doubt , Afaik Moto never released soak ota to non soak member ,so what happen if we apply this ota and By chance Moto release 1 more ota to soak members . We will stuck on this version will be fully dependent on someone to leak that also . And aside you I don't see anyone doing this .
Click to expand...
Click to collapse
debanildas said:
After installing all 5 of the updates , will the moto dev apps like Moto Survey , Perf Monitor , PM Test etc will be there or not..?
Click to expand...
Click to collapse
The updates remain same for all and are ready to install on Moto Servers. However they limit the people who can access these updates by EMEI number which they collect during Soak Test. Once the test is over, the EMEI limit is removed and same updates are delivered to everyone. Once the Soak Test is over, i believe, everyone will get to install all these one after another OR one build with all these updates packed in one file. However the final build number or version will be same for everyone. So nothing to be afraid of.
Having said these, you will just have to wait until Soak is over for any updates to come from Moto; Until then, i will release them here for benefit

Zip Files Not Visible
I went into the recovery mode and selected the update from SD card option But the zip files i copied into the root directory are not visible to select there. What should i do?

mark_kou said:
I thought to give it a try.
First I backuped my phone, and flashed stock Indian rom and latest OTA update I had. (Mind that my device is a european XT1562 on which I have flashed Indian firmware in order to enable dual sim functionality).
Then I tried to flash the first .zip file via stock recovery, and all I got was error (status 7). It said that "package expects build fingerprint of ... MPDS24.107-70-1-5 or NPD26.42 and mine was MPDS24.107-52-11.
After searching the forum, I found a twrp backup of that exact version I needed(MPDS24.107-70-1-5)
So I just booted twrp recovery without flashing it on the phone, and restored the backup I downloaded.
Afterwards I rebooted to stock recovery and tried to flash the first zip, which again failed and I got the same message.
My system version was indeed MPDS24.107-70-1-5 at the time.
So I gave up and restored my perfectly working 6.0.1 setup.
Thanks for sharing the OTAs, but I had no luck installing them.
I guess I have to wait.
Click to expand...
Click to collapse
I have updated main post with below, however posting it for you as it is apt. Note if you dont have below builds, you can get one of Stock ROM from other threads in the forum and continue with installation.
Below is the sequence in which updates have to be applied. An update can be installed ONLY if existing version matches given after file name below. Note you can directly install a version and skip previous builds if your existing build matches one given below. Example : If your current build is 7.1.1/NPD26.48-8/8, can skip to install 01 and 02; directly install 03-05.
01. Blur_Version.26.1.42.lux_retasia_ds.retasiaall.en.03.zip if build is "ro.build = 6.0.1/MPDS24.107-70-1-5/5" OR "ro.build = 7.1.1/NPD26.42/34"
02. Blur_Version.26.21.8.lux_retasia_ds.retasiaall.en.03.zip if build is "ro.build = 7.1.1/NPD26.42/34" OR "ro.build = 7.1.1/NPD26.48-8/8"
03. Blur_Version.26.21.16.lux_retasia_ds.retasiaall.en.03.zip if build is "ro.build = 7.1.1/NPD26.48-8/8" OR "ro.build = 7.1.1/NPD26.48-16/16"
04. Blur_Version.26.21.24.lux_retasia_ds.retasiaall.en.03.zip if build is "ro.build = 7.1.1/NPD26.48-16/16" OR "ro.build = 7.1.1/NPD26.48-24/24"
05. Blur_Version.26.31.1.lux_retasia_ds.retasiaall.en.03.zip if build is "ro.build = 7.1.1/NPD26.48-24/24" OR "ro.build = 7.1.1/NPD26.48-24-1/1"

s5610 said:
Until you have locked bootloader, or RSD service ROM 7.1.1 will leak. It should happen, I'm sure.
Click to expand...
Click to collapse
There are other threads in this forum where in full Stock ROM is released after integrating OTAs. One of the developers will do this and until then, just wait. Same has happened when i had released OTAs for previous version.

murugunm said:
I went into the recovery mode and selected the update from SD card option But the zip files i copied into the root directory are not visible to select there. What should i do?
Click to expand...
Click to collapse
If you have copied files to Internal Memory, then you will have to choose Internal Memory instead of SD Card Option. I recommend you to move all files from Internal Memory to SD Card and apply update. In case you dont have SD Card, place one at a time in Internal Memory and apply updates.

[ROM][STOCK][PIE 9.0] Install stock Android Pie without unlocked bootloader

Hello everybody, I'm sharing this tutorial to how to force Android Pie installation on retail moto x4.
Warning: read all the steps carefully. I'm not responsible for your actions and you're on your own on this..
What you need to do this
At first, follow the commandments to change the firmware of a mobile phone:
You will need an SD card (minimum 2gb of memory) !!! IMPORTANT !!! - See step 3.1 if you don't have a SD Card
Check if the battery is above 80%
Make sure you have ADB + Fastboot drivers installed AND YOU CAN ACCESS IT FROM YOUR COMMAND PROMPT
Make sure you have the latest Motorola Drivers installed on your computer.
Tested on:
- XT1900-1 - Ok
- XT1900-4 - Ok
- XR1900-5 w/ Android 8.0 - Ok
- XT1900-6 w/ Android 8.1 - Ok
- XT1900-7 w/ Android 8.0 - Ok
Not working for:
- XT1900-2 Indian Variant
Let's do this.
Step 1
Understand that this Pie update zip does not work on devices running Android One (google_fi) or Amazon (AMZ), only Retail phones. No matter if you have already installed other systems on it, you have to be in a retail (better with locked bt).
If you are not in retail, I picked up the latest retail firmware to install. Flash it on your device before proceeding.
Warning: note If your actual version number (OPWS 99.999.99-99) is lower than you will download below. If your current version number is higher, the procedure will not work and you will have to abandon this tutorial unless you unlock your bootloader, and I do not recommend doing this since rollback can cause brick your device permanently.
For Retail Android 8.1
Firmware: https://moto.netlib.re/payton/PAYTON_OPWS28.46-21-16_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
For Retail Android 8.0 devices (devices which never updated to 8.1) -- thanks to Comby_sk
Firmware: https://moto.netlib.re/payton/PAYTON_OPWS27.57-40-25_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Android Pie Firmware: https://moto.netlib.re/payton/OTAs/ab_delta-Blur_Version.27.301.32-29.11.36.payton.retail.en.US.zip (don't download the step 2's file if you're downloading this. THIS IS ONLY FOR ANDROID 8.0 NOT 8.1)
-------
You will need this file too. Copy all text, create a notepad file with it's content and name it "Flash-all.bat".
Flash-all.bat: https://pastebin.com/pZ9ZteGX
Step 2
Skip to step 3.1 if you don't have a SD Card
After installing the Android 8.1 firmware on your device, download this ROM and place it at the root of your SD card.
Android Pie Firmware: https://moto.netlib.re/payton/OTAs/ab_delta-Blur_Version.28.271.24-29.11.36.payton.retail.en.US.zip
Step 3
Reboot your device to Fastboot, and start it on recovery mode (hold power button and press volume + -- don't hold both buttons simultaneously). When done, select "Apply update from SD card" and select the update package. The update is slow and it took more than 1 hour with me. Then sit back and relax while it's installed.
Step 3.1
If you don't have a SD Card, you should upload the file with a ADB command.
Download the file from Step 2 and put the file in the same directory where your adb is installed.
Restart your payton to recovery mode (hold power button and press volume + -- don't hold both buttons simultaneously). When done, select "Apply update from ADB" and them run this command from CMD:
HTML:
adb sideload path_to_your_file
this command can take about 40 to 60 minutes for the speed of uploading and installing the update.
Note: path_to_your_file should be the full file name where your downloaded zip are.
Step 4
To work everything perfect and with no bug after the upgrade:
I) Go to settings -> System -> Advanced -> Reset options -> Factory reset the device
II) If the phone stucks on motorola boot screen, soft reset it. (hold power button for ~15 seconds)
III) Do all the initial setup procedures, then update the all the pending Play Store apps, and restart the device.
After that, your device will be with the stock Android Pie installed. Congratulations.

Have you tried it with the bootloader blocked?

Just did it on my XT1900-6, working fine but i had to install the update via adb.

[XT1900-7][STOCK][PIE] Install stock Android Pie without unlocked bootloader
It looks that guide from OP can be used for installing stock Pie on XT1900-7 reteu model.
Step 1.
Install OPWS27.57-40-25 fastboot package (Blur_Version.27.301.32.payton.retail.en.US with october 2018 security patch) instead from OP
Step 2.
Install PPW29.69-26 OTA (Blur_Version.29.11.36.payton.retail.en.US) instead from OP
Will try tonight.

al3al3al3jandr0 said:
Have you tried it with the bootloader blocked?
Click to expand...
Click to collapse
this tutorial is for locked/blocked bootloader

-
Sorry i was wrong.

SebastKae said:
@Comby_sk The last one is linked to the same file than the OP?
Click to expand...
Click to collapse
No, it is different. OP file is "28.xx.xx" to "29.xx.xx". My file is "27.xx.xx" to "29.xx.xx".
27 = 8.0
28 = 8.1
29 = 9.0
XT1900-7 never had 8.1, only 8.0. For XT1900-7 upgrade from 27 to 29 is needed.

What is the process for xt1900-2? I am on latest october patch OPWS 27.57-40-3-15

Prinjal Dave said:
What is the process for xt1900-2? I am on latest october patch OPWS 27.57-40-3-15
Click to expand...
Click to collapse
No one, your blur version "27.306.16" hasn´t Pie OTA yet.

Comby_sk said:
No one, your blur version "27.306.16" hasn´t Pie OTA yet.
Click to expand...
Click to collapse
So i can't update to pie yet.... Right?

Prinjal Dave said:
What is the process for xt1900-2? I am on latest october patch OPWS 27.57-40-3-15
Click to expand...
Click to collapse
I've updated the thread with Android 8.0 options.

CypherPotato said:
I've updated the thread with Android 8.0 options.
Click to expand...
Click to collapse
Thanks

CypherPotato said:
I've updated the thread with Android 8.0 options.
Click to expand...
Click to collapse
I have XT1900-2 OPWS27.57-40-3-15
How to flash/update PIE using these files? both files through SD Card or manually using fastboot method?
Code:
For Retail Android 8.0 devices (devices which never updated to 8.1) -- thanks to Comby_sk
Firmware: https://moto.netlib.re/payton/PAYTON...LT_CFC.xml.zip
Android Pie Firmware: https://moto.netlib.re/payton/OTAs/a...tail.en.US.zip (don't download the step 2's file if you're downloading this. THIS IS ONLY FOR ANDROID 8.0 NOT 8.1)

Prinjal Dave said:
So i can't update to pie yet.... Right?
Click to expand...
Click to collapse
Right

zlebors said:
I have XT1900-2 OPWS27.57-40-3-15
How to flash/update PIE using these files? both files through SD Card or manually using fastboot method?
Code:
For Retail Android 8.0 devices (devices which never updated to 8.1) -- thanks to Comby_sk
Firmware: https://moto.netlib.re/payton/PAYTON...LT_CFC.xml.zip
Android Pie Firmware: https://moto.netlib.re/payton/OTAs/a...tail.en.US.zip (don't download the step 2's file if you're downloading this. THIS IS ONLY FOR ANDROID 8.0 NOT 8.1)
Click to expand...
Click to collapse
Same thing as the post says. Flash Firmware using fastboot and flash Android Pie Firmware from recovery

CypherPotato said:
I've updated the thread with Android 8.0 options.
Click to expand...
Click to collapse
I think, it won't work on all 8.0 versions. E.g. XT1900-2 OPWS 27.57-40-3-15 has different blur version "27.306.16", but Pie OTA needs "27.301.32".

Is this for xt19-1 or what

boonemeat said:
Is this for xt19-1 or what
Click to expand...
Click to collapse
for all devices

This doesn't work with large SD cards since recovery mode can't mount the external sd card. I tried with a 128gb one and it failed, luckily I had a 4GB one lying around.

Comby_sk said:
I think, it won't work on all 8.0 versions. E.g. XT1900-2 OPWS 27.57-40-3-15 has different blur version "27.306.16", but Pie OTA needs "27.301.32".
Click to expand...
Click to collapse
CypherPotato said:
for all devices
Click to expand...
Click to collapse
any suggestions?

How To Guide [TB-J706F] [ROM] ZUI 12.6 Offline easy install

Hello TB-J706F (aka XiaoXin Pad Pro) users !
Latest ZUI ROM cannot be found in the file repositories and on the Lenovo support site. However, you can download the initial version of ZUI for our tablet and update to the latest ZUI 12.6, getting 4 updates. However, in fact, we only need two of them. I kindly saved them for you and included in my superpack along with the necessary software.
Link: https://cloud.mail.ru/public/DHTp/9dm4g5e13
Second link: https://drive.google.com/file/d/1ELq8YIU1FRL_4OX5RSWba9m2korSRDxD
The archive contains all necessary soft:
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Adb & fastboot, lenovo USB drivers, flasher QPRST and detailed instructions (English) in pictures how to install QPRST and flash the initial ZUI - All-in-One. There are two updates in the folder OTA:
1update.zip - updates ZUI to v. 12.5 (first A 11 version);
2update.zip - updates ZUI 12.5 to 12.6 latest at this moment.
ZUI first ROM can be downloaded from here: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro/TB-J706F/ - TB-J706F_CN_WIFI_USER_Q00018.0_Q_ZUI_12.0.335_ST_201103_qpst.zip
Attention !!! The first thing you must do is to make sure that your parameter in NV item 6858 is 01 or 00, otherwise the ZUI A11 will not boot (A10 can). How to do this, look guide: https://forum.xda-developers.com/t/check-region-unlock-p11-tb-j606f-l-n.4356451/ That guide advises also change country code, I have CN (China), it can be changed after first ZUI flashing, code ####6030# in Settings -- Search bar on top.
=== Manual ===​1. According to the pdf guide, flash the downloaded ZUI ROM. Boot, minimal offline initial settings, and you can see Desktop screen. If you need change region code to CN - go to Settings, insert ####6030#, маке choise from one point CN or PRC (People Republic China). This will reboot and clear the user's data (factory reset). Now you need to go to settings, become a developer, enable USB debugging. Also you need set right data (day, month and year).
2. On PC: unpack Adb Tools in folder, place 1update.zip & 2update.zip inside adb tools folder. Run the Command Prompt, check connect to device and command the tablet:
adb reboot recovery
In tablet's recovery select Apply update from ADB and on PC run command adb sideload 1update.zip. Wait for update process completion, then reboot into the system, patiently wait for the booting to complete. Now you have ZUI 12.5 on tablet.
3. Repeat the previous step using 2update.zip - adb sideload 2update.zip. Wait for completion, then reboot into the system.
Now you have latest ZUI 12.6 !
The ZUI looks much prettier, more comfortable and sleeker than the poor global firmware, and has more features.
P.S. The video shows the firmware process of changing NV item 6858 in the hex editor to install the ZUI, only for the younger version of the tablet. The process is the same for the P11 Pro.
Spoiler: Korean language
​

Thank you for this!
May I request for the update files? The link you provided is not working. Thanks!

o97601 said:
Thank you for this!
May I request for the update files? The link you provided is not working. Thanks!
Click to expand...
Click to collapse
Hi ! Checked it moment ago, link working: https://cloud.mail.ru/public/DHTp/9dm4g5e13
Spoiler

d1m-ON said:
Hi ! Checked it moment ago, link working: https://cloud.mail.ru/public/DHTp/9dm4g5e13
Spoiler
View attachment 5484189
Click to expand...
Click to collapse
Thank you but I think my location is not letting me to download the file. I have a problem though. I was trying to change the region code but the QFIL is not letting me to backup my QCN. I can't click the button. On the other hand, when I am using the NV Read and Writer, my phone is not communicating to it. Any help?

I don't think you should do it, it's too complicated for you. You can't even download my file via VPN and connect the tablet properly
Another link: https://drive.google.com/file/d/1ELq8YIU1FRL_4OX5RSWba9m2korSRDxD
P.S. You need flash ZUI from lolinet first, and second is connect tablet in DIAG mode, then backup .qcn and restore edited .qcn

I'm done backing up the QCN. But unfortunately, I cant find the hex code that it requires. I cut my chase and just stay with 12.5 for the mean time. Thank you!

After updating I get this screen and I can't do anything else.
Yes, I followed the instructions to the letter

Just flashed again to the original ROM.

d1m-ON said:
Hello TB-J706F (aka XiaoXin Pad Pro) users !
Latest ZUI ROM cannot be found in the file repositories and on the Lenovo support site. However, you can download the initial version of ZUI for our tablet and update to the latest ZUI 12.6, getting 4 updates. However, in fact, we only need two of them. I kindly saved them for you and included in my superpack along with the necessary software.
Link: https://cloud.mail.ru/public/DHTp/9dm4g5e13
Second link: https://drive.google.com/file/d/1ELq8YIU1FRL_4OX5RSWba9m2korSRDxD
The archive contains all necessary soft:
Spoiler
View attachment 5480323
Adb & fastboot, lenovo USB drivers, flasher QPRST and detailed instructions (English) in pictures how to install QPRST and flash the initial ZUI - All-in-One. There are two updates in the folder OTA:
1update.zip - updates ZUI to v. 12.5 (first A 11 version);
2update.zip - updates ZUI 12.5 to 12.6 latest at this moment.
ZUI first ROM can be downloaded from here: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro/TB-J706F/ - TB-J706F_CN_WIFI_USER_Q00018.0_Q_ZUI_12.0.335_ST_201103_qpst.zip
Attention !!! The first thing you must do is to make sure that your parameter in NV item 6858 is 01 or 00, otherwise the ZUI A11 will not boot (A10 can). How to do this, look guide: https://forum.xda-developers.com/t/check-region-unlock-p11-tb-j606f-l-n.4356451/ That guide advises also change country code, I have CN (China), it can be changed after first ZUI flashing, code ####6030# in Settings -- Search bar on top.
=== Manual ===​1. According to the pdf guide, flash the downloaded ZUI ROM. Boot, minimal offline initial settings, and you can see Desktop screen. If you need change region code to CN - go to Settings, insert ####6030#, маке choise from one point CN or PRC (People Republic China). This will reboot and clear the user's data (factory reset). Now you need to go to settings, become a developer, enable USB debugging. Also you need set right data (day, month and year).
2. On PC: unpack Adb Tools in folder, place 1update.zip & 2update.zip inside adb tools folder. Run the Command Prompt, check connect to device and command the tablet:
adb reboot recovery
In tablet's recovery select Apply update from ADB and on PC run command adb sideload 1update.zip. Wait for update process completion, then reboot into the system, patiently wait for the booting to complete. Now you have ZUI 12.5 on tablet.
3. Repeat the previous step using 2update.zip - adb sideload 2update.zip. Wait for completion, then reboot into the system.
Now you have latest ZUI 12.6 !
The ZUI looks much prettier, more comfortable and sleeker than the poor global firmware, and has more features.
​
Click to expand...
Click to collapse
can i flash from row to zui 12.6?

Finally! Thank you!

datntien said:
can i flash from row to zui 12.6?
Click to expand...
Click to collapse
Yes! Just follow the tutorial

o97601 said:
Finally! Thank you!
Click to expand...
Click to collapse
Congrats! You are great!

datntien said:
can i flash from row to zui 12.6?
Click to expand...
Click to collapse
Sure, no problems.
Video added:
Spoiler: Korean language

d1m-ON said:
Congrats! You are great!
Click to expand...
Click to collapse
May I know where did you get the files in OTA? I am searching if there is already an update for zui 13.

o97601 said:
May I know where did you get the files in OTA? I am searching if there is already an update for zui 13.
Click to expand...
Click to collapse
I have been getting updates to my tablet via Wi-Fi and after downloading (before installing) I save the update file to the microSD. The update files arrive on the device in the .Zuiota folder (hidden folder).

Thanks for the guide. I have succeed and now I am running ZUI 12.6. I did the updates OTA instead using adb. I setted the internal country code to 00, I had ROW rom before and the code was 02. I used GFil and was straightforward. If you decide to stay with ROW rom I recommend change the setting ####6030# to any country but CN, because doing this the Play Store became certified and NetFlix can be installed from Play Store.

blagoon52 said:
Thanks for the guide. I have succeed and now I am running ZUI 12.6. I did the updates OTA instead using adb. I setted the internal country code to 00, I had ROW rom before and the code was 02. I used GFil and was straightforward. If you decide to stay with ROW rom I recommend change the setting ####6030# to any country but CN, because doing this the Play Store became certified and NetFlix can be installed from Play Store.
View attachment 5498519
Click to expand...
Click to collapse
This is great. I already have 12.6.133 for the longest time and haven't been able to receive another update in OTA. I don't know if it is capable or not.

tenthofmay said:
This is great. I already have 12.6.133 for the longest time and haven't been able to receive another update in OTA. I don't know if it is capable or not.
Click to expand...
Click to collapse
Seems that there is an update to Zui 13 for the Pad Pro, so I will confirm if I can get it through OTA.

d1m-ON said:
Hello TB-J706F (aka XiaoXin Pad Pro) users !
Latest ZUI ROM cannot be found in the file repositories and on the Lenovo support site. However, you can download the initial version of ZUI for our tablet and update to the latest ZUI 12.6, getting 4 updates. However, in fact, we only need two of them. I kindly saved them for you and included in my superpack along with the necessary software.
Link: https://cloud.mail.ru/public/DHTp/9dm4g5e13
Second link: https://drive.google.com/file/d/1ELq8YIU1FRL_4OX5RSWba9m2korSRDxD
The archive contains all necessary soft:
​
Click to expand...
Click to collapse
!!! No more need !!! Latest ROM is here: https://forum.xda-developers.com/t/lenovo-tb-j706f-zui-12-6-133.4383047/

tenthofmay said:
but the QFIL is not letting me to backup my QCN. I can't click the button
Click to expand...
Click to collapse
I have the same problem. Why don't you share your solution?
Edit: solved by running "qpst configuration" application, adding the device (second tab), right-click and click "switch to diagnostic mode" or something like that.
Then rebooted the device to FFBM mode.