Database Info

ZTE N762 - Android 2.3 and UMX MAX MXE-670 root?

ZTE N762 - Android 2.3 and UMX MAX MXE-670
The page http://www.publicmobile.ca/pmconsumer/phones?lang=en has changed since the previous check.
Added:
+ ZTE N762
+ * Android 2.3
+ * 3.5" touch screen display
+ * Email and web-friendly
+ * 2 MP camera
+ * Speakerphone
+ *
+ Find a store near you
+ Details
+ Max
+ * Android 2.3
+ * 3.2" touch screen display
+ * Email and web-friendly
+ * 3.2 MP camera
+ * Front-facing camera
+ *
+ Find a store near you
+ Details
FCC ID Q78-ZTEN762 ??
msm7627 (based on FCC photos), also have SIM slot in FCC photos
But no hotspot?
https://fjallfoss.fcc.gov/oetcf/eas...e=N&application_id=184108&fcc_id='Q78-ZTEN762
then select: "declaration Letter For hot spot mode"
(direct linking not work)
------
Then
http://umxusa.com/cdma/mxe-670/
QSC6085
Max
Android 2.3
3.2" touch screen display
Email and web-friendly
3.2 MP camera
Front-facing camera
FCC ID ??
---
Has anyone brought one of those yet?
Which phone can be rooted?

.
Thread moved to Q&A due to it being a question. Would advise you to read forum rules and post in correct section.
Failure to comply with forum rules will result in an infraction and/or ban depending on severity of rule break.

N762 rooting
So im looking too for root this device.
I already try z4root, superOneClick and some ather apps to root, no one work.
I tried permanent root, temporal... Still not rooted.
Have somebody idea haw to do that?
P.s.4 day later...
I didnt find the way how to root it yet but already have internet connection on my laptop via my phone whith this UNNNlimeted internet from publickmobile phone(ZTE 762). Speed is slow: around 1.5 mb/s. But it is better than nothing. also didnt work which torrents and some of online video players. But youtube always work.

No Luck
I've been looking for a way to root my MAX for the last few days.
Drivers I have tried havent worked.
And I cant find any device drivers for Teleepoch or UMX phones.
Here's more on the device: h.ttp://umxphones.com/cdma/mxe-670
I think its gonna be quite a while before the driver ends up on: h.ttp://developer.android.com/sdk/oem-usb.html
So in the meanwhile I emailed Unimax to see if they would provide one.
Ideally i want to root the device just to get a few apps off of it that i never use and that take up valuable storage space that were installed by the carrier.
Ill keep looking and post if i find anything!

UMX do not answer nor reply to any communication
It is pretty sad that there is absolutly no support drivers for devellopers. USB Debugging doesnt work since no drivers for the Teleepoch HSUSB Device.
Not to mention the spyware (sorry but to imo, something installed and can't be removed, with non-essential use, and that send back informations is an spyware) such as Easy WIFI, and the fact that if you just disable it, it service still try to run every minute or so, and hog the bluetooth media audio. Seriously, try it, for me, I was seeing the EasyWIFI process service come up and 1 sec after the bluetooth was jamming for 1-2 seconds. As soon as I re-enabled EasyWIFI, without setuping the home network of that app, my bluetooth stopped cutting... figure!
That is why, is essential that someone find a way to root this device, or at least a way to debug for developpers, and a way to get the original firmware from the manufacturer, without the bloatware ?
(Edit: I've tryed to phone UMX at different phone number, left multiple messages, sent emails. umxmobile.com recently seem to went offline and in the support section, there a ftp address... idk )
Thanks for any results you find !

Zte root
Hey i got the ZTE N762 , and im new to the android world so i was wondering is this root would work on my phone (the ZTE n762 from publicmobile) : http://forum.xda-developers.com/showthread.php?t=1319257.

I just switched from Fido (45$ a month cityfido + 10$ for caller ID and voicemail) to publicmobile (unlimited talk, text and data on the island of Montreal) for 35$/month for 6 months then 45$, I don't need voicemail, only caller ID which is included.
With the N762 I was able to tether to my laptop with USB using PDANET v3.02, worked perfectly after I enabled usb debugging and so far I get the same speeds as on the phone itself (which is pretty slow TBH, but it's way better than fido's 2$/20mb data plan.

New to Android world too...
Ok so Yeah gonna introduce myself by telling yall what i be doing. So I wanna get ried of the twitter, the spyware, the inter grated programs that are stuck in my phone. You know the crummy clock, the lame calender, all that stuff that takes storage space in a memory card that really shouldn't have programs run such power to the memory that's powering your phone....anyway hope u get the picture. I tried every possibility to root the UMX. Recap I'm trying to use "one click root" I got the SDK developer kit. which i dont quite fully understand but for some reason u need it for "one click root" but "one click root" doesn;t see my phone. I thought maybe it could be because of USB not reconizing it into the program. Updating drivers dont work i installed LG drivers lol. My phone is not a LG. what im trying to say ive done everything i can to root it. And I am not proceeding to success just yet. I really wanna root my phone before any SOPA Bill try anything to get to my phone. Ill have spyware uninstalled. It would mean everything in the world to me. I would stop being paranoid of SOPA Bill. Or the NDAA Bill. Thats scary. We are in control. we are the users. and the 99% lol. Someone help us Root our phones....please and spanks - Splizzlah Savage

Well after installing LauncherPro all the ugly overlays around the icons are gone, looks much better with just the icons.
Also FoxFi in android market works ok for wifi tethering from the N762 most of the time, when it doesn't work, I have to pull down the notification bar and disable/enable wifi tether, and it will work.

sersoft2 said:
Well after installing LauncherPro all the ugly overlays around the icons are gone, looks much better with just the icons.
Also FoxFi in android market works ok for wifi tethering from the N762 most of the time, when it doesn't work, I have to pull down the notification bar and disable/enable wifi tether, and it will work.
Click to expand...
Click to collapse
Hi, I also have a N762 and it doesn't work on my side. When I use FoxFi, the only website that works is Facebook. All the others give me a : This web page is not accessible.
It looks like the 3g servers block the tethering...
Can you help me please

tihonmon said:
P.s.4 day later...
I didnt find the way how to root it yet but already have internet connection on my laptop via my phone whith this UNNNlimeted internet from publickmobile phone(ZTE 762). Speed is slow: around 1.5 mb/s. But it is better than nothing. also didnt work which torrents and some of online video players. But youtube always work.
Click to expand...
Click to collapse
What did you use? On my side, it doesn't work either with PDANet, FoxFi and Clockworkmod Tether...
How did you do it?
Thank you
---------- Post added at 10:49 PM ---------- Previous post was at 10:27 PM ----------
I found how to do it !!
When using PDANet, you just need to go on settings and hide tether usage.
It works!

You guys are lucky to get 1.5mbps, I get 0.3-0.5megabits/s where I live, I tried Speedtest.net on both the ZTE and the MAX, both give me around 30kB/s download and around 150kB/s upload.
Also to get FoxFi working you need this on the PC: User Agent Switcher for Firefox, just import this XML file
techpatterns(dot)com/downloads/firefox/useragentswitcher.xml
into it and choose a webkit based browser by clicking Tools->Default user agent. Worked for me, also I use my HTC IncS tethered to the ZTE N762 without any plugin, much more convenient to browse the web and watch videos.

How do you root this phone? Someone on here must have a method? I have tried evry exploit there is and every one-click to no success. If we had a custom recovery it would be easy, but i dont think there is one. Also, are there any stock images or tools to flash back to stock if we screw something up while trying to root it?(ie, odin,lgdp,or other similar tools?)
Also, every method i have tried keeps saying read-only filesystem for /system mount. Is there a nandlock or something?
I even tried using nautilus from ubuntu with root permissions and the phone in download mode to write to /system but it doesn't work.

Solved - Confirmed 3g, wifi, phone calls Public Mobile
I have tested a chinese rom that works in english. Confirmed 3g, wifi, phone calls, rooted, Public mobile, android 2.3.5 dev kept the rom stock just rooted with apps.
http://nolochemical.kodemind.com/rooting-zte-n762

Can someone post the network info for PublicMobile it would be good to archive it here while rom testing.

Real Method WITHOUT flashing chinese ROM
New METHOD!!!! I have finally found a way to root the n762. This method uses a clockworkmod recovery that i found online but lost the source link too.(I had like 20 tabs open at once and must of closed the tab,now i cant find it.)Credits to whoever compiled the recovery.
Steps.
Download the recovery.img
Download update.zip
using adb type: adb reboot bootloader
using fastboot type: fastboot flash recovery c:\recovery.img (make sure the img is in c: or just replace with the path to the .img)
when its done flashing type fastboot reboot
when phone is booted put the update.zip on the root of your sdcard
use adb and type: adb reboot recovery
the recovery will be upside down but its close to fully functional(adb doesn't work as well as some other things but it doesn't matter)
apply the update.zip from sdcard and you will be fully rooted!!
GOOD LUCK everyone

@bluntman420
Worked from the first try, thank you!

@sersoft2 glad it worked for you!

nothing for the max? or this method works too?

Not sure about the max?Don't have one to test.

I just accidentally bought a rooted HTC M8 on eBay with issues. Should I keep it?!

I am in Australia and have just recently bought an HTC M8 on eBay which was originally listed as new, and factory unlocked for $530. A few days later I found out it was actually rooted now unlocked, but was originally locked to Sprint. This was confirmed by a Sprint Connections application update etc, and the root was confirmed by the SuperSU app that was already installed in the phone. I'm recently confirmed this by the Root Checker app.
My phone's software is Android version 4.4.2, HTC Sense 6, software number 1.54.651.8, HTC SDK api LEVEL 6.17, PRI version 1.52_003, Kernel version [email protected] #1 SMP PREEMPT, Baseband version 1.05.20.0321_2.
The phone is pretty functional for everyday use except for the following issues:
- The internet network settings had to be manually obtained from my carrier as the phone did not automatically pick it up.
- The internet seems slower than usual (Signal strength -79 dBm 17-20 asu) compared to my old phone (Xperia Z1), despite the settings being specifically on 3G/UTMS mode which is faster than having it on Global Mode, and the required setting with my carrier Optus.
- I cannot access anything under System Updates. i.e. Update profile, Update PRL, UCICC Unlock and most importantly, HTC software update. This update takes >20minutes to search to no avail. This error message at times pops up when I try selecting Update profile: “vDM Client has stopped unexpectedly. An error report will be sent to HTC to help us improve our products”. This error screen would pop up intermittently when my internet didn't work but, I rarely see it now.
- Wifi would randomly switch on. I've turned off all system selections that may be caused on this. I haven’t tried booting my phone into safe mode to determine if an app is causing this.
I don't know much about phones (I had no idea what rooting was until I looked it up to get a rough idea), so I'm wondering if you experts could be some advice
I'm planning on keeping the phone for about 2 years and wondering what issues I may receive from having a rooted phone with the already above issues? Would the phone play up more? Can I use my current android version for that period relatively smoothly?
I am able to return my phone for a full refund but I don't have a spare phone and don't want to go in to the hassle of doing so if I can keep the phone (I would prefer to leave them negative feedback on eBay to be honest ). What do you guys think?
Thanks in advance for any asisstance.

Update your phone to android 4. 4. 4
Sent from my SM-G530H using XDA Free mobile app

Just reflash the stock rom and relock the bootloader and everything should be fine.

Bought a first Android phone, not working as hoped - pointer for working it out?

I just bought my first ever Android phone, Acer Liquid Zest Plus.
It's not quite working in the limited ways I was hoping it to work.
First, I drive a Honda, which has handsfreelink system for connecting the phone to the car. The phone connects to handsfreelink ok, but then shows some weird behavior, in that when using the car's controls to place a call through handsfreelink, handsfreelink immediately apparently hangs up the call (i.e. the car's display shows that it hung up the call). However, this does not actually hang up the call on the phone itself, as the call gets placed nonetheless and when someone picks up on the other side, I can have a conversation through the car's audio system. Seems to almost work, but the weird behavior just described means that I can't hang up a call without pulling the phone out of my pocket and hanging it up from the phone (as opposed to hanging up using the car's controls) while driving, which takes a lot away from the point of it all.
What could be the issue with this? Note that I had a Blackberry Passport before, which used to work all as intended with handsfreelink, and my family member's iPhone 7 Plus also works as intended with handsfreelink. Is it that my Acer Liquid Zest Plus does not have the necessary bluetooth profile/stack to works with Honda's handsfreelink? Is it that handsfreelink proprietary to Honda and uses something unique, as opposed to being a generic bluetooth device of the kind? Is a bluetooth device link this, used by other auto manufacturers, feature the same generic bluetooth thing, or is this something only Holda can possibly answer for me?
Could updating the phone solve this issue? If so, how? I go into Settings -> About phone -> System updates and it tells me that my device is up to date (I did not update it since pulling it out of the box). I notice that it's on Android 6.0 , and a quick Google search showed some discussions that it is highly unlikely that the phone will get newer Android update. The "Android security patch level" shown in "About phone" says December 5, 2016. That's a long time without a security patch. Should I, and is it possible to, update the phone?
I've heard of rooting an Android device and installing custom Roms before. Where can I find a guide for my device and the custom Rom files? I am hoping this might solve my issue with handsfreelink.
I know I am all around the place with my questions, but essentially, the issue I am having is that bluetooth connection to my car's audio system does not work as expected, and I am wondering how I might fix it. I am wondering if an OS update (either official version by manufacturer or a widely-used custom Rom) might solve this issue, or simply adding an extra bluetooth profile to the phone.
A solution would be awesome, but I'd be asking too much if I was hoping for that. Instead, if anyone can just provide me some pointers in terms of how to do research on what I should be doing to solve this, or clarify some concepts (to the extent you can tell I got it wrong from reading this post) for me, it would be really appreciated.
I've already been to Honda's handsfreelink website and Acer's support page for this product and there's nothing helpful there.
Thank you very much.

ACER
monotious said:
I just bought my first ever Android phone, Acer Liquid Zest Plus.
It's not quite working in the limited ways I was hoping it to work.
First, I drive a Honda, which has handsfreelink system for connecting the phone to the car. The phone connects to handsfreelink ok, but then shows some weird behavior, in that when using the car's controls to place a call through handsfreelink, handsfreelink immediately apparently hangs up the call (i.e. the car's display shows that it hung up the call). However, this does not actually hang up the call on the phone itself, as the call gets placed nonetheless and when someone picks up on the other side, I can have a conversation through the car's audio system. Seems to almost work, but the weird behavior just described means that I can't hang up a call without pulling the phone out of my pocket and hanging it up from the phone (as opposed to hanging up using the car's controls) while driving, which takes a lot away from the point of it all.
What could be the issue with this? Note that I had a Blackberry Passport before, which used to work all as intended with handsfreelink, and my family member's iPhone 7 Plus also works as intended with handsfreelink. Is it that my Acer Liquid Zest Plus does not have the necessary bluetooth profile/stack to works with Honda's handsfreelink? Is it that handsfreelink proprietary to Honda and uses something unique, as opposed to being a generic bluetooth device of the kind? Is a bluetooth device link this, used by other auto manufacturers, feature the same generic bluetooth thing, or is this something only Holda can possibly answer for me?
Could updating the phone solve this issue? If so, how? I go into Settings -> About phone -> System updates and it tells me that my device is up to date (I did not update it since pulling it out of the box). I notice that it's on Android 6.0 , and a quick Google search showed some discussions that it is highly unlikely that the phone will get newer Android update. The "Android security patch level" shown in "About phone" says December 5, 2016. That's a long time without a security patch. Should I, and is it possible to, update the phone?
I've heard of rooting an Android device and installing custom Roms before. Where can I find a guide for my device and the custom Rom files? I am hoping this might solve my issue with handsfreelink.
I know I am all around the place with my questions, but essentially, the issue I am having is that bluetooth connection to my car's audio system does not work as expected, and I am wondering how I might fix it. I am wondering if an OS update (either official version by manufacturer or a widely-used custom Rom) might solve this issue, or simply adding an extra bluetooth profile to the phone.
A solution would be awesome, but I'd be asking too much if I was hoping for that. Instead, if anyone can just provide me some pointers in terms of how to do research on what I should be doing to solve this, or clarify some concepts (to the extent you can tell I got it wrong from reading this post) for me, it would be really appreciated.
I've already been to Honda's handsfreelink website and Acer's support page for this product and there's nothing helpful there.
Thank you very much.
Click to expand...
Click to collapse
Acer is just the brand and few software smartphonne.they just order big amount of phones and sell them. the phone shows as Shanghai Huaqin Telecom Technology Co.,Ltd),have seen this on my old --vodaphonne-.The only emergenncy update from january 05 2018 and this is as far you go with ACER. YOU will never get any update .The name LIQUID is there PR name of there LAUNCHER,that´s all.ROOTING??? no point,waste of time no one will till today do it. Have the same phone and feel that I did a mistake and lost money.ACER stopped to sell smartphones. If you want to modiffy the phone the LAWNCHAIR launcher is good ,aswell others. But keep in mind that will be always android 6 and no security updates

Freudeauf2 said:
Acer is just the brand and few software smartphonne.they just order big amount of phones and sell them. the phone shows as Shanghai Huaqin Telecom Technology Co.,Ltd),have seen this on my old --vodaphonne-.The only emergenncy update from january 05 2018 and this is as far you go with ACER. YOU will never get any update .The name LIQUID is there PR name of there LAUNCHER,that´s all.ROOTING??? no point,waste of time no one will till today do it. Have the same phone and feel that I did a mistake and lost money.ACER stopped to sell smartphones. If you want to modiffy the phone the LAWNCHAIR launcher is good ,aswell others. But keep in mind that will be always android 6 and no security updates
Click to expand...
Click to collapse
your bluetooth -you have to install a app from third party and then configure the rest in the app and in setting device.Importend timer schould be always set as on in bluetooth .Standard is few minutes.good luck
---------- Post added at 02:23 PM ---------- Previous post was at 02:06 PM ----------
Freudeauf2 said:
your bluetooth -you have to install a app from third party and then configure the rest in the app and in setting device.Importend timer schould be always set as on in bluetooth .Standard is few minutes.good luck
Click to expand...
Click to collapse
To keep all your apps uptodate I use from FDROID app the YALP STORE ,there you can in settings update your system apps,as I sad this is the way as far you go with ACER. Hope it helps

How to enable Preferred WiFi Calling on Android P Developer Preview?

As was shown here: https://www.xda-developers.com/enable-preferred-wifi-calling-option-verizon-pixel-pixel-xl/ you could enable WiFi calling as your preferred calling method with this nice little ADB command. I can confirm with Oreo it worked, and stuck through reboots and all. I have however now sideloaded my Verizon Pixel with the Developer Preview of Android P. It was a smooth upgrade, however I can no longer get WiFi calling to be preferred with the ADB command. It was originally still listed there, and was still containing the "2" value, but the setting no longer worked. I did a factory reset to start fresh, and I notice that the setting is no longer present when doing the “settings list global” command. I tried adding the line and it still does not work. Anyone have a workaround or any ideas on what I can try to get the WiFi calling to be preferred again? I really rely upon it at work, as we have almost no cell signal, and I have come to love the previous ability I had to have it be the Preferred method for all my calls. Since I have one of the jacked Verizon Pixels, I was never able to unlock the Bootloader, so there is no going back for me! I do also want to say on that note though, for the last week, since I did the factory reset and re-did everything, my phone has been rock solid on the "P" Developer Preview!

Stealth111 said:
As was shown here: https://www.xda-developers.com/enable-preferred-wifi-calling-option-verizon-pixel-pixel-xl/ you could enable WiFi calling as your preferred calling method with this nice little ADB command. I can confirm with Oreo it worked, and stuck through reboots and all. I have however now sideloaded my Verizon Pixel with the Developer Preview of Android P. It was a smooth upgrade, however I can no longer get WiFi calling to be preferred with the ADB command. It was originally still listed there, and was still containing the "2" value, but the setting no longer worked. I did a factory reset to start fresh, and I notice that the setting is no longer present when doing the “settings list global” command. I tried adding the line and it still does not work. Anyone have a workaround or any ideas on what I can try to get the WiFi calling to be preferred again? I really rely upon it at work, as we have almost no cell signal, and I have come to love the previous ability I had to have it be the Preferred method for all my calls. Since I have one of the jacked Verizon Pixels, I was never able to unlock the Bootloader, so there is no going back for me! I do also want to say on that note though, for the last week, since I did the factory reset and re-did everything, my phone has been rock solid on the "P" Developer Preview!
Click to expand...
Click to collapse
I know there was a flashable magisk module that enabled the options, but it doesn't help with the actual ims status(*#*#4636#*#*, phone settings, ims status). It might be that you need the official Verizon rom that includes the necessary lib files, or that the dev preview doesn't include those and therefore you can't yet enable it?

Xdevillived666 said:
I know there was a flashable magisk module that enabled the options, but it doesn't help with the actual ims status(*#*#4636#*#*, phone settings, ims status). It might be that you need the official Verizon rom that includes the necessary lib files, or that the dev preview doesn't include those and therefore you can't yet enable it?
Click to expand...
Click to collapse
I though about the Verizon thing as well, but I also used the Developer Preview for Oreo, and it worked with it just fine, so I am thinkning they have just moved it somewhere else in the "P", or something of that nature, but I am hoping that someone here can possibly figure it out!

Stealth111 said:
I though about the Verizon thing as well, but I also used the Developer Preview for Oreo, and it worked with it just fine, so I am thinkning they have just moved it somewhere else in the "P", or something of that nature, but I am hoping that someone here can possibly figure it out!
Click to expand...
Click to collapse
I'm having the same problem after a recent update. WiFi calling no longer works, and the option has disappeared from settings.
Dialing *#*#4636#*#* no longer brings up the menu, either.
I tried via adb shell to set wfc_ims_mode=2, but that doesn't work. `settings list global` shows that it is set to 2, but even after reboot wifi calling still doesn't work.

euhn said:
I'm having the same problem after a recent update. WiFi calling no longer works, and the option has disappeared from settings.
Dialing *#*#4636#*#* no longer brings up the menu, either.
I tried via adb shell to set wfc_ims_mode=2, but that doesn't work. `settings list global` shows that it is set to 2, but even after reboot wifi calling still doesn't work.
Click to expand...
Click to collapse
Probably just something that handy yet been implemented, being it is a Dev preview . Same thing with the lockscreen shortcut icons for camera and phone.

Just an update. I stuck a T-Mobile SIM card in my phone and after using the magisk module I mentioned, the options appeared for the advanced and wifi calling. I'll do it again tomorrow and pay a screen . It's almost midnight here so gonna crash

I'm running stock p on verizon. Hoping someone comes up with a solution.

Add this : system/buildprop under additional properties -Make sure to enable read write on "system" first

Xdevillived666 said:
Add this : system/buildprop under additional properties -Make sure to enable read write on "system" first
Click to expand...
Click to collapse
Experiencing this issue after upgrading my Pixel XL and my wife's Pixel 2 to the Verizon Pie.
Details for my Pixel XL:
Android Version 9
Android Security Patch Level: August 5th, 2018
Kernel Version: 3.18.10-ga765425
Build Number: PPR1.180610.009
I used to use the ADB hack flawlessly, now I can't seem to make WiFi Calling Preferred over mobile network. So even though I have one bar that goes in and out, it uses the network then drops.

murraj2 said:
Experiencing this issue after upgrading my Pixel XL and my wife's Pixel 2 to the Verizon Pie.
Details for my Pixel XL:
Android Version 9
Android Security Patch Level: August 5th, 2018
Kernel Version: 3.18.10-ga765425
Build Number: PPR1.180610.009
I used to use the ADB hack flawlessly, now I can't seem to make WiFi Calling Preferred over mobile network. So even though I have one bar that goes in and out, it uses the network then drops.
Click to expand...
Click to collapse
I'm gonna pm ya

I haven't even updated to P yet and mine stopped working on the last security patch. I can set it back using adb. Reboot and wifi calling comes on. The first phone call works for about 5 minutes, then drops. The settings database values go back to default. The only way to get it to work again is to go through the whole process again.
Too much trouble. Sure would be nice to just turn it on and have it work.
Sent from my Pixel using Tapatalk

If you've already had WiFi calling working previously with pixel (I can only confirm first gen works with this)
Add this : system/buildprop under additional properties -Make sure to enable read write on "system" first and then add the following (see doc).

Doc here
Just copy paste all lines according to instructions from previous post. Check and make sure under phone menu that you are instructions registered

Xdevillived666 said:
If you've already had WiFi calling working previously with pixel (I can only confirm first gen works with this)
Add this : system/buildprop under additional properties -Make sure to enable read write on "system" first and then add the following (see doc).
Click to expand...
Click to collapse
I'm new to all this, what do you mean by, "Add this : system/buildprop under additional properties -Make sure to enable read write on "system" first"

XDA won't let me put the text needed in the comments. Dload my PDF and copy paste the text from there to your buildprop

Does Google Pay still work after you edit the build.prop file?
Sent from my Pixel 2 XL using Tapatalk

abuttino said:
Does Google Pay still work after you edit the build.prop file?
Click to expand...
Click to collapse
I didn't not know. Can't use it in France anyways so I'm not worried about it.

Doesn't work in DP5
Hoping that someone else here can verify it in the regular version of pie.
I didn't switch to the RTM because WiFi calling is too important and I did want to test it though.
Sent from my Pixel 2 XL using Tapatalk

HELP needed! Moto G41 phone where VPN menu is GONE after Android 12 update!

Hello XDA Forum!
After my Magisk rooted Motorola Moto G41 phone got updated to Android 12 it no longer shows the VPN menu under Internet settings and the VPN client can't create a VPN profile/connection either and immediately fails.
Looks like this is something that is a thing with Motorolas lineup of phones and that has been fixed with an update(?) in certain models but apparently not the G41.
https://forums.lenovo.com/t5/moto-g60s/vpn-menù-on-android-12-moto-g60s/m-p/5183211
Running System Update in the settings menu shows "Everything looks good! You are using the latest software."
Android Version 12, Software version S3RWS32.138-29-3-3
Security Correction 1 february 2023
... all is not GOOD.
They mention in threads using ADB and USB debugging alongside two apps called "Shizuku" and "App Ops" in tandem to be able to "give VPN permission" to the VPN client app. Saying they use this as a workaround for the time being but NO further instruction on what to do. Doing the wrong thing with these applications could quite easily brick or mess up the phone quite badly ....
Either if someone here knows how to do THAT *or* if there is something that can be done to get the VPN menu BACK in another way any help or information is appreciated.
Waiting to hear back from Motorola support about a possible fix.
Any help with this would be greatly appreciated!