Database Info

Clear Smoke Snap-On Case for T Mobile G2

So today I receive my Clear Smoke Snap On Case from DAYDEAL.COM on Ebay. I always like the smoke look on my phones when purchasing a case, so my decision was no different this time around. The case overall does not restrict the phone functions or slide out keyboard. Phone is protected well from the top and bottom, sides vary because of the large volume key on the phone. The case is more design to protect your phone from scratches, nicks, and knee height drops. Personally I believe major drops like, phone falling when leaving your car, might be pushing it. Case does fits well onto the phone, so you don't have to worry about it falling apart when in use.
Overall I give case a 8/10 base on value, minor protection, and overall design and look on the phone.
I have posted some pictures on my gallery using image shack, see below.
h t t p://img443.imageshack.us/gal.php?g=clearsmokecase.jpg

http://img443.imageshack.us/gal.php?g=clearsmokecase.jpg

Thank you

Thanks for including the pics!
I just have a couple questions:
How much bulk does it feel like it adds to the phone?
Does it collect a lot of finger prints?

Troggie81 said:
Thanks for including the pics!
I just have a couple questions:
How much bulk does it feel like it adds to the phone?
Does it collect a lot of finger prints?
Click to expand...
Click to collapse
I can answer your second question without a problem, I work doing vinyl manufacturing so grease, dust, and dirt are a daily routine for my phone. So far it has pass the test with two days under these conditions, NO PRINTS, scratches, or stains. Adds no bulk what so whatever, which is a plus. Only complaint is that it's really hard to take off, but that's a good thing also.

Where you get it?
Edit:nvm found out
Sent from my HTC Vision G2

I have the clear version of this... well the place where I got my phone provided me one for free. It's pretty decent for free... as with all cases it'll make your phone look prettty lame but that's the price for protection.
Easy put on, the part that is on the screen is easily taken off but the part attacked to the keyboard and battery are a little harder.

Just got this from daydeal and got to say its fantastic for the price better than the seidio one I had for my milestone thanks op

Just received mine today. Most cases look pretty stupid but I think the "smoke" appearance to this unit actually make the whole thing look pretty nice.

Have the same (?) model and my experinence is the same. The phone feels really protected, but adds bulk and makes it look a bit silly. Almost feels like my old SE P990.
Still it fits snuggly and can't think of a better solution if one wants more than scratch protection.

Cases / Shells - what're you getting / reviews:

Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.

ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.

Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.

MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.

I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).

I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide

SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.

I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.

I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.

@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?

The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium

ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.

siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.

Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.

I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2

_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.

_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.

cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....

Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.

cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.

[Q] S6 non-wallet leather case (back only, brown, in US)

I think there used to be a thread on this, but I can't find it anymore. Here's my question:
I'm looking for a thin leather case for my S6. Not so much a wallet style case, sleeve, or one with a closure, just a protector for the back and sides of the device. My experience with PU or low-grade leather (<$20) isn't great, so I'm fine spending a little more money (>$50).
Ideally, it would be brown and available in the US. The options I've seen so far don't fit in with the color, price, or domestic availability. Any suggestions? If you're going to suggest these, I've already looked at them and they are a bust:
I'm an XDA noob, so I'm prevented from posting links, but I've looked at cases from Stilgut (can't order from Amazon US and potential returns to DE seem difficult), Sena (no back-only case for the S6), Vaja (not making a case for the S6), and Montblanc (if I'm gonna spend $110, I need one that is perfect, i.e., brown). None fit the bill.
Again, apologies if this is a duplicate thread. Any help/suggestions would be greatly appreciated.
Thanks!
P.S. As an aside, I'd consider a wooden case, but none of those (Carved, Toast, etc.) seem to be what I'm looking for either.

I'm interested in this as well.
The official Apple leather case for the iPhone is perfection for what I want. Unfortunately, that's one area that Samsung doesn't seem willing to take design queues from. I wouldn't mind paying 40/50 bucks if its THE only case id want/need.

lucas.scott said:
I'm interested in this as well.
The official Apple leather case for the iPhone is perfection for what I want. Unfortunately, that's one area that Samsung doesn't seem willing to take design queues from. I wouldn't mind paying 40/50 bucks if its THE only case id want/need.
Click to expand...
Click to collapse
Currently choosing between Galaxy S6 and iPhone 6. As silly as it might sound, a good leather (shell) case is one of my highest priorities.
I broke 3 iPhone 5's until I put the official leather case on it (I always disliked plasticky cases).
It added more grip, and just enough protection from average falls.
Ridiculous really. Choosing a $1000 piece of tech based on a $50 accessory. But that's just how it is.
Hopefully someone knows of something.

They haven't announced the S6 case yet but I have always been happy with with Vajacases - if you are willing to drop some extra cash. Here's one of the options for the S5: http://www.vajacases.com/galaxy-s5-leather-cases/premium-leather-grip
Edit: I see you mentioned Vaja is not making an S6 case. What is your source? It usually takes them a few months before the new models are ready.

There actually was a thread on this subject until recently, but when trying to find it now, I just realized it has inexplicably been deleted. Had a few good examples in it, but they're obviously not reachable now. I'll post the link here below in case the thread turns up again.
http://forum.xda-developers.com/galaxy-s6/accessories/simple-leather-wallet-case-t3095597/

sankyou said:
They haven't announced the S6 case yet but I have always been happy with with Vajacases - if you are willing to drop some extra cash. Here's one of the options for the S5: {link removed because I'm new and can't have links in any of my posts}
Edit: I see you mentioned Vaja is not making an S6 case. What is your source? It usually takes them a few months before the new models are ready.
Click to expand...
Click to collapse
I contacted Vaja through their website back in April and they told me that it was under development. When I checked in last week, they said that a case for the S6 "is not currently being planned for production. We planned to develop a line in the past but I am afraid right now the project has been cancelled."
Whether that means it may show up later, who knows, but for now we're out of luck. Boo.

Yeah, no clue either why the other thread disappeared. It led me to a couple of versions of Apple-esque leather Galaxy S6 cases on eBay.
This one without a plastic fill in the camera/HRM cutout is the one that I already bought in dark blue for my black S6. In short:
Top and bottom are left uncovered
Fit is pretty good, no looseness anywhere really
The power + volume down buttons are both properly clicky
The volume up is pretty mushy, but not too bad
No interference with headphone jack or bottom USB port
The width of the case means that the camera module no longer touches the surface when laid on its back
It does NOT, however, appear to have any lift on the front so your screen will touch the surface when laid facedown
The last item was probably so that swiping in from the edge of the screen is still quite comfortable
Overall I'm pleased enough with the quality and feel of the PU leather cases that I might end up also trying out this slightly different version with plastic fill for the camera/HRM cutout . I'm not sure if it's unclear photos but it looks like this version has full coverage around at least the top of the bottom?
Anyhow, the one that I have feels a lot like the Apple Leather case I've tried out on iPhone 6, which is exactly what I was looking for.

sosquidtaste said:
Yeah, no clue either why the other thread disappeared. It led me to a couple of versions of Apple-esque leather Galaxy S6 cases on eBay.
This one without a plastic fill in the camera/HRM cutout is the one that I already bought in dark blue for my black S6. In short:
Top and bottom are left uncovered
Fit is pretty good, no looseness anywhere really
The power + volume down buttons are both properly clicky
The volume up is pretty mushy, but not too bad
No interference with headphone jack or bottom USB port
The width of the case means that the camera module no longer touches the surface when laid on its back
It does NOT, however, appear to have any lift on the front so your screen will touch the surface when laid facedown
The last item was probably so that swiping in from the edge of the screen is still quite comfortable
Overall I'm pleased enough with the quality and feel of the PU leather cases that I might end up also trying out this slightly different version with plastic fill for the camera/HRM cutout . I'm not sure if it's unclear photos but it looks like this version has full coverage around at least the top of the bottom?
Anyhow, the one that I have feels a lot like the Apple Leather case I've tried out on iPhone 6, which is exactly what I was looking for.
Click to expand...
Click to collapse
Wow, thank you so much. The "more expensive one" is exactly what I am looking for. No cutouts on the side or anything. Looks perfect. Out of curiosity, how long did shipping take? I have the worst luck with that kind of thing, and it looks like it ships out of China.
Also, since you have the dark blue/black S6, can you throw up a few images for me?
I just ordered one of each... hopefully they arrive before S7....

Looks like one of these would work. Thanks for the tip.

lucas.scott said:
Wow, thank you so much. The "more expensive one" is exactly what I am looking for. No cutouts on the side or anything. Looks perfect. Out of curiosity, how long did shipping take? I have the worst luck with that kind of thing, and it looks like it ships out of China.
Also, since you have the dark blue/black S6, can you throw up a few images for me?
I just ordered one of each... hopefully they arrive before S7....
Click to expand...
Click to collapse
Yeah, the buttons on the second cases I linked in my post look like they'll have better buttons. On mine it's like... slits on each end of the button section.
Shipping was surprisingly fast for me. I think I wanted like... just under two weeks? I was quoted a shipment time like 30+ days from purchase (which is insane), so I was pleasantly surprised when it showed up in normal China --> US shipment time.
If I can get a few minutes to myself at home tonight I'll try and snap a few choice pics of the dark blue on my black S6.
Though it's not without its tradeoffs, I think you'll be more than pleased with your order

sosquidtaste said:
Yeah, the buttons on the second cases I linked in my post look like they'll have better buttons. On mine it's like... slits on each end of the button section.
Shipping was surprisingly fast for me. I think I wanted like... just under two weeks? I was quoted a shipment time like 30+ days from purchase (which is insane), so I was pleasantly surprised when it showed up in normal China --> US shipment time.
If I can get a few minutes to myself at home tonight I'll try and snap a few choice pics of the dark blue on my black S6.
Though it's not without its tradeoffs, I think you'll be more than pleased with your order
Click to expand...
Click to collapse
Awesome man - thanks for the info!
Much appreciated on the pics!

ronnotronald said:
I think there used to be a thread on this, but I can't find it anymore. Here's my question:
I'm looking for a thin leather case for my S6. Not so much a wallet style case, sleeve, or one with a closure, just a protector for the back and sides of the device. My experience with PU or low-grade leather (<$20) isn't great, so I'm fine spending a little more money (>$50).
Ideally, it would be brown and available in the US. The options I've seen so far don't fit in with the color, price, or domestic availability. Any suggestions? If you're going to suggest these, I've already looked at them and they are a bust:
I'm an XDA noob, so I'm prevented from posting links, but I've looked at cases from Stilgut (can't order from Amazon US and potential returns to DE seem difficult), Sena (no back-only case for the S6), Vaja (not making a case for the S6), and Montblanc (if I'm gonna spend $110, I need one that is perfect, i.e., brown). None fit the bill.
Again, apologies if this is a duplicate thread. Any help/suggestions would be greatly appreciated.
Thanks!
P.S. As an aside, I'd consider a wooden case, but none of those (Carved, Toast, etc.) seem to be what I'm looking for either.
Click to expand...
Click to collapse
lucas.scott said:
I'm interested in this as well.
The official Apple leather case for the iPhone is perfection for what I want. Unfortunately, that's one area that Samsung doesn't seem willing to take design queues from. I wouldn't mind paying 40/50 bucks if its THE only case id want/need.
Click to expand...
Click to collapse
I found a high end solution for you guys as well. Reviews on Bouletta from the Sony forums talk about them being some of the highest quality leather cases on the market.
BLACK: http://www.bouletta.com/index.php?i...xy_s6_ultimate_jacket_other_models-uj_rbt1_s6
BROWN: http://www.bouletta.com/index.php?i...xy_s6_ultimate_jacket_other_models-uj_rbt5_s6

Looks nice, but having the cut outs on the side just make it feel cheap to me...Even if it's of the highest quality

lucas.scott said:
Looks nice, but having the cut outs on the side just make it feel cheap to me...Even if it's of the highest quality
Click to expand...
Click to collapse
I know exactly what you mean. Originally I wanted an Xperia Z3, but there are literally no cases available without massive side cut-outs. The Z3 one is borderline ridiculous: http://www.bouletta.com/index.php?id_product=103&controller=product
The Galaxy S6 one isn't too bad. Not as good as the standard Apple one though unfortunately =\

I have the second case linked from ebay earlier. It is nowhere near leather feeling. I would say it feels more like a smoothed out velvet than anything. Also, the case does not really offer any protection for the front. It might stick out 1mm past the screen. Overall it is an okay case for the price, but if anyone wants a "leather" feel to a case, this is not the one for you. The buttons are not that great either. You lose most of the tactility from the keys with the case. I imagine over time they will break in and feel better, but after a week of use it doesn't feel great, but doesn't feel as bad as it did at first.

chinesefood said:
I found a high end solution for you guys as well. Reviews on Bouletta from the Sony forums talk about them being some of the highest quality leather cases on the market.
BLACK: no links for me
BROWN: no links for me
Click to expand...
Click to collapse
Am I missing something? I can't seem to find a price/how to buy? Is it a non-US site?. Also, the brown case looks grayish, no? (I'm legit color blind though, so that could just be my broken eyes)

Hey that bouletta case looks really nice. However, is the thickness of the back of the case enough so that the camera doesn't touch the surface the phone is placed on? I've seen many posts of people saying how they cracked the camera lenses after just putting the s6 on its back like on a table or something similar.
Thanks

ronnotronald said:
Am I missing something? I can't seem to find a price/how to buy? Is it a non-US site?. Also, the brown case looks grayish, no? (I'm legit color blind though, so that could just be my broken eyes)
Click to expand...
Click to collapse
You're right. I've sent them an email to find out.

ARRIVED!!
This one came in today : http://www.ebay.com/itm/Luxury-Orig...Domain_0&var=570673785727&hash=item3f4af29e66
Gotta say... i'm insanely impressed. I can't imagine getting much closer to the official Apple Leather case than this. Sure, there is virtually no drop protection, but that's not what I'm into. Just need to keep it scratch free and get that camera bump evened out. I have attached some pics.
Biggest problem for most people will be lack of lip around the screen. It's pretty much flush with the aluminum on the device. I actually prefer that since I never ever place my device face down... so i'm able to still feel the slight curve to the glass.
The buttons are a little stiff right now - but I'm going to chalk that up to material. It'd be awesome if they wear in over time, but not a big deal if they don't. I'm thrilled with this thing for 8 bucks... could easily sell for 30 in US retail stores.
I also got the 5 dollar version and it's not nearly as nice. That two dollars makes all the difference in the world apparently.

lucas.scott said:
This one came in today : http://www.ebay.com/itm/Luxury-Orig...Domain_0&var=570673785727&hash=item3f4af29e66
Gotta say... i'm insanely impressed. I can't imagine getting much closer to the official Apple Leather case than this. Sure, there is virtually no drop protection, but that's not what I'm into. Just need to keep it scratch free and get that camera bump evened out. I have attached some pics.
Biggest problem for most people will be lack of lip around the screen. It's pretty much flush with the aluminum on the device. I actually prefer that since I never ever place my device face down... so i'm able to still feel the slight curve to the glass.
The buttons are a little stiff right now - but I'm going to chalk that up to material. It'd be awesome if they wear in over time, but not a big deal if they don't. I'm thrilled with this thing for 8 bucks... could easily sell for 30 in US retail stores.
I also got the 5 dollar version and it's not nearly as nice. That two dollars makes all the difference in the world apparently.
Click to expand...
Click to collapse
Thanks for the pictures. It looks to be a little off around the bottom of the phone. Is it just the angle of the picture or is that the case?
I had purchased something like this for an iPhone 6 plus that I had and it just slightly didn't fit the phone. The cut out for the camera was off were it wouldn't sit flush with the back of the phone. I ended up just biting the bullet and paying the 50 odd bucks for the apple one. It would be nice if there was a decent quality real leather option, even if the price was higher. I guess we'll just have to wait and see. Again thanks for the picture.

Olixar ArmourDillo OnePlus 6

Hi guys,
I figured i would chip in with my mini-review of Olixar ArmourDillo for our beloved OP6. I was looking for a heavy-duty protection as I often bring my OP6 to places where the risk of damaging is a bit higher (e.g. to a kids playground when going out with my daughter or warehouse where i work) or do things which are not exactly deemed as "safe" such as pulling the phone out of my backpack, which is still on my back, with my left hand, though i'm right handed, while cycling, on a rough terrain I was also looking for a case with a stand option but don't really fancy a flip case. Spiegen for some reason didn't include the kickstand in the OP6 rugged armor so I was actually not really left with many other options.
I ordered one last weekend directly from official Olixar web pages, and it arrived in about 3 working days. Price was around 17 EUR including delivery.
I immediately installed it and those are my findings:
PROs:
- very solid construction of the case.
- fantastic grip!
- very good protection of the camera (case overlaps with a VERY safe margin)
- all ports and alert slider are easily accessible and buttons work nicely.
- makes FP easier to use - the opening in the case kind of "guides" your finger to the FP scanner
- kickstand (some might see it as a CON, but not me).
- didnt have the chance to try (yet) but i think there is enough margin around the screen to make the case compatible with the official or other TGSPs (e.g. orzly) -> I am expecting Orzly TGSP delivered in the coming week so i will be able to test.
CONs:
- the case is not exactly a "snug fit". I could already tell it was "too easy" to put the base on and I was hoping that clicking the exoskeleton on would "lock" the phone in, but that's not exactly happening. Even with the exoskeleton on the case can be removed.
- the case overlap from the screen side could have been bigger. It overlaps by merely 1 mm, or perhaps even less (definitely less than the original case provided with the device). I worry that if the phone dropped on the corner-screen side than the slack I described in the first point would actually allow the screen/TGSP to touch the ground and crack.
IMAGES
CONCLUSION:
In general I am quite happy with the purchase and the case undoubtedly provides some serious protection to our phone...though i'd be much happier if the case was a little bit tighter.

So does the case overlap the screen protector (i assume that's what you mean by tgsp?)? Thanks for the review!

R0ttenB4ndit said:
So does the case overlap the screen protector (i assume that's what you mean by tgsp?)? Thanks for the review!
Click to expand...
Click to collapse
Sorry, haven't tested it yet. The orzly did arrive last week but so did my son so haven't really been able to get much done since

Jackill said:
Sorry, haven't tested it yet. The orzly did arrive last week but so did my son so haven't really been able to get much done since
Click to expand...
Click to collapse
Congrats, well that's one way to announce it
BTW, any do you also have the official tempered glass and any idea if it will support it?

reddead66 said:
Congrats, well that's one way to announce it
BTW, any do you also have the official tempered glass and any idea if it will support it?
Click to expand...
Click to collapse
Allright so i think the armourdillo is pretty much orzly tgsp compatible.
To answer your question, no, i dont, but i doubt the official tgsp is bigger than the one from orzly, and even if so then probably not by much. There is still enough margin so i think you should not have any problems with the official one either.
Good luck!

Jackill said:
Hi guys,
PROs:
- fantastic grip!
Click to expand...
Click to collapse
Thanks for the great review. I'm interested to hear more about the grip. I bought a UAG Plasma for my OP6, and even though it looks grippy, it's not. All the contoured bits are slippery, hard plastic. I dropped the phone a number of times in the couple of days I used the UAG.
I find the gel cases the best, but with cold, dry hands, even they get a bit slippery.
How does this case go with cold, dry hands? And how useful are the hard plastic contours on the back? And what about the base - where your pinky grips it when typing with one hand? Is that section soft TPU or hard plastic?
Thanks heaps in advance.
Cheers
Glenn

Closeup pics of the latest Dbrand Prism and Grip

Hi guys, I'm sure you've seen quite a few pictures of those accessories, so I thought I'd post here a few images from very close to some details so you can have a good idea of the finish, etc.
Also a small comparison with an official case (nylon one). I've ordered a skin for it, but it was on preorder and just started shipping today.
Sorry for the lint on some pictures, it does catch it ^^
As for my opinion (one more of those), well the case does feel real good in hand, the phone feels really safe in there. The buttons are real good (miles better than Rhinoshield bumper). Only thing is that the fingerprint scanner is deep and in a small window, so must get a little used to the feeling of really accurately put the finger in there. And is it grippy ? Is fine! a bit better than the official case but not by super much.
Prism is also good, easy to install. Biggest critic is how sharp the edges are (you can see on the pictures). If you don't use a case, you'll feel them and I'd be afraid to lift it by mistake, not sure how securely it sticks. The feeling is like glass, I was using the phone naked previously and no problem with that. Also, it does not affect the screen, I think ; some peops say it makes the screen cloudy, but I do not notice.
Worth the price ? Hmm those things are a rip off no matter what. But they are both good quality products, and the glass screen protector without a black border is a real step up ^^.
There you go!

Thanks for sharing! Would you recommend dropping $$$ on this combo?

silent_freak said:
Thanks for sharing! Would you recommend dropping $$$ on this combo?
Click to expand...
Click to collapse
Well, all in all, it is near 60 USD.
The case is good I think, feels good and will protect the phone that's for sure, so if you don't have anything like that, it is a good buy. I also have an official OP cover and the main difference is that the Dbrand case has raised edges.
The glass, while it is good, is not as ground breaking as I imagined (Dbrand's marketing team is good ^^). The plus is that it feels like glass and does not have a black border, is as fingerprints resistant as the bare glass or the official screen protector. The bad is that the glass as you can see on the pictures is really only on the screen and has sharp corners, so you feel it when doing gestures, unless you use a case (because then your finger does not slide from the farther edge of the phone, if you see what I mean).
So out of the two, I would say the actually real good product is the case.

The case looks too bulky to me. I prefer the slimmer ones like the official protective sandstone or the karbon bumper, which are really well made. But I guess it depends on the environment you're working in (etc) which affects the danger your phoneis in, in which case, if it's a place you can easily damage it, this type of case can save you good money on repairs. The prism looks really durable from what I've seen online and I believe you get 2 in the box if I'm not mistaken, so if that's true, that's a big plus over rhinoshield's overpriced 1x black bordered piece of crap that covers at least 1mm of screen on each side, forcing you to just take it off minutes after installation and breaking it in anger.
Anyway, thanks for giving us a look at dbrand's new products. Was really looking forward to seeing someone talk about that.

dragos281993 said:
The case looks too bulky to me. I prefer the slimmer ones like the [...] Was really looking forward to seeing someone talk about that.
Click to expand...
Click to collapse
I agree as well, it does add quite a bit of bulk.
I have all in all 3 cases. The simple one from OP (carbon one), their thicker nylon one and this one from dbrand. I don't really need a lot of protection (scratches protection is good enough) so it's mostly to change the look. I go naked as well with just a skin.
The result is that with that dbrand case you do feel very confident that the phone is safe.
Yes you do get two prism in the box, so that's actually quite a sweet deal because those are sturdy and nice to the touch really like glass without the border.
I have not been able to try with the simple case from OP, it's still in my boxes after moving house, but do not underestimate how annoying the edges of the prism are. They really really get in the way.
I think it's important to stress this because for example people were downplaying the terrible buttons of the Rhinoshield bumper for op5 and I got it and it was in actuality very bad.

kipue said:
I agree as well, it does add quite a bit of bulk.
I have all in all 3 cases. The simple one from OP (carbon one), their thicker nylon one and this one from dbrand. I don't really need a lot of protection (scratches protection is good enough) so it's mostly to change the look. I go naked as well with just a skin.
The result is that with that dbrand case you do feel very confident that the phone is safe.
Yes you do get two prism in the box, so that's actually quite a sweet deal because those are sturdy and nice to the touch really like glass without the border.
I have not been able to try with the simple case from OP, it's still in my boxes after moving house, but do not underestimate how annoying the edges of the prism are. They really really get in the way.
I think it's important to stress this because for example people were downplaying the terrible buttons of the Rhinoshield bumper for op5 and I got it and it was in actuality very bad.
Click to expand...
Click to collapse
I dropped my OP6 from approximately 2.5meters from the locomotive's door and the phone miraculously survived with the karbon case having one nick in the top right side corner and surprisingly that disappeared after a few days. Very impressive quality. I was also very lucky, I guess, considering the height the phone fell from. THEN I got the bumper case from Rhinoshield along with the garbage black bordered glass. I broke the glass in half after basically donating money to them because that glass was not worth the price, but that was that. I put their bumper on my phone and left it there for a few days. ****ty buttons, poor quality material and slippery too, like a hard plastic you find in those kitchen accessories, but whatever, I liked the alert slider one. Then one day I got in my car and the phone fell from my pocket on concrete (or asphalt) and because it happened right at the edge of the road, one hard little rock managed to touch the edge of the screen at impact and cracked the screen on the middle right side with the crack starting from the bottom and ending in a "C" shape 2 or 3 centimeters above. So it's still ok but the start of the crack can be felt at touch so that's a bummer.
And in the end I could've given the money to the old lady beggar at the corner of the street instead of giving it to Rhinoshield for 2 absolutely rubbish products they made such a big fuss about.
Never again I'll buy from them. Dbrand's products seem a bit different though especially that prism. I might get one and put it on the screen to protect it from getting other cracks if I accidentally drop it, cause the crack is pretty small to make me replace the screen. I don't think it's worth it.

dragos281993 said:
I dropped my OP6 from approximately [...] . I might get one and put it on the screen to protect it from getting other cracks if I accidentally drop it, cause the crack is pretty small to make me replace the screen. I don't think it's worth it.
Click to expand...
Click to collapse
Yeah, as usual those things are very often quite a leap of faith. We want to believe that the more expensive it is the better it will be but the truth is that it's probably the same or close to the same with a different packaging :angel:
But need a screen protector at least to maintain the resell value of the devices.
I'll say again, prism is a good one but not perfect (like none of them is).

Can you comment on the alert slider functionality with the case on? I can make it out slightly on one of the pictures and it looks like you can use it with ease?
I'm currently using a Poetic case, I need a solid case with my work conditions. The only issue is the damn alert slider is rendered unusable without a pen or something similar handy.

ahagersr said:
Can you comment on the alert slider functionality with the case on? I can make it out slightly on one of the pictures and it looks like you can use it with ease?
I'm currently using a Poetic case, I need a solid case with my work conditions. The only issue is the damn alert slider is rendered unusable without a pen or something similar handy.
Click to expand...
Click to collapse
Hey,
The slider is quite easy to use yes.
You got to get a bit used to it cause its quite nestled in there so you have to make a little effort at first to put the finger the right way.
Same as with the fingerprint reader, a little bit of time to get used to it, because it's deeper so you can't approach it from whatever direction like you would naked or with a different case. It's still easy to use.
All in all out of their two products, I recommand the case with no problem. If you look for safety then for sure go for it.
Will make a few more pics to show you.

kipue said:
Hey,
The slider is quite easy to use yes.
You got to get a bit used to it cause its quite nestled in the so you have to make a little effort at first to put the finger the right way.
Same as with the fingerprint reader, a little bit of time to get used to it, because it's deeper so you can't approach it from whatever direction like you would naked or with a different case. It's still easy to use.
All in all out if their two products, I recommand the case with no problem. If you look for safety then for sure go for it.
Will make a few more pics to show you.
Click to expand...
Click to collapse
Thank you very much for your time!

ahagersr said:
Thank you very much for your time!
Click to expand...
Click to collapse
Sure, no problem.
So here are a few more. The last one is to show how the phone screen does not touch a flat surface when it is put face down. It's blurry but you'll get the idea.
Also some lint, not fighting that anymore