I have an honor 6x here that has the FRP locked, bootloader unlocked and under developer options, OEM unlocking is disabled and greyed out.
I changed my oeminfo to Chinese to use oreo, and decided I wanted to go back to BLN-24 because I had tons of problems so I reflashed bln-24 oeminfo and then the latest update package on Firmware Finder for bln24 via HURU & TWRP.
I'm now on build # NRD90M test-keys, android 7.0 with emui 5.0.4.
I have stock recovery and I'm unable to do any fastboot commands since frp is locked.
I've tried the DLOAD method once, but it failed. (I only see one FULL-OTA firmware for the bln-24 on firmware finder :silly:..)
I'm also unable to relock the bootloader via fastboot, I get
FAILED (remote: root type is risk)
Any suggestions? Thanks!
I'm in the same boat, except that my bootloader is also locked.
Help please.
erecovery with firmware finder's dns will solve it in no time, and works every time.
galapagos said:
erecovery with firmware finder's dns will solve it in no time, and works every time.
Click to expand...
Click to collapse
Don't I need the correct OEM info on my phone to use that?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't know which Firmware erecovery would use
I'm stuck at "Getting Package Info failed", even if i try the changelog.xml from the directory where I got the update.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3196/g1699/v147280/f1/full/changelog.xml
galapagos said:
erecovery with firmware finder's dns will solve it in no time, and works every time.
Click to expand...
Click to collapse
I tried but this fails for me too
zenixa said:
I tried but this fails for me too
Click to expand...
Click to collapse
You did change the dns in your router to the one provided by FF, right?
Use dload method
galapagos said:
You did change the dns in your router to the one provided by FF, right?
Click to expand...
Click to collapse
yeah, the update gets detected and everything goes fine on hiSuite, it'll finish downloading and then when my phone restarts to recovery for it to install it'll fail. I've only tried it with one firmware though(the one that's already installed on the device, so that could be why it fails) but I only see one BLN-L24 in firmware finder.
zenixa said:
yeah, the update gets detected and everything goes fine on hiSuite, it'll finish downloading and then when my phone restarts to recovery for it to install it'll fail. I've only tried it with one firmware though(the one that's already installed on the device, so that could be why it fails) but I only see one BLN-L24 in firmware finder.
Click to expand...
Click to collapse
got it!
I managed to find more firmware via the mobile updater finder and was able to successfully flash one using the DNS method.
I'm not sure why the pc version don't show as many BLN-24's as the mobile version does, but I'm so glad it's fixed now.
Thanks everyone <3
I tried three different firmwares, even the one it had when I got it, still no luck
HiSuite is detecting the update and the install fails on the phone
Chest3r said:
I tried three different firmwares, even the one it had when I got it, still no luck
HiSuite is detecting the update and the install fails on the phone
Click to expand...
Click to collapse
What's your original firmware version?
BLN-L21C432B375
I even tried B360, no luck, did you flash via HiSuite or did you use the updater on the cellphone with the DNS method? Till now I've only tried HiSuite, because erecovery didn't find any packages with the DNS method.
I also checked and the firmware is installable for my imei, I'm kinda lost here
don't use hisuite. just change the dns and use the erecovery.
galapagos said:
don't use hisuite. just change the dns and use the erecovery.
Click to expand...
Click to collapse
Yea, i tried that, it says "Getting package information failed".
I created a Wlan network with the FF DNS Server, if i try HiSuite it finds updates, erecovery doesnt.
Please explain the process
zenixa said:
got it!
I managed to find more firmware via the mobile updater finder and was able to successfully flash one using the DNS method.
I'm not sure why the pc version don't show as many BLN-24's as the mobile version does, but I'm so glad it's fixed now.
Thanks everyone <3
Click to expand...
Click to collapse
Bro I am stuck with the same problem can you please elaborate the process ?
Related
Its almost October and I'm still stuck on EMUI 4.1. My model is BLN-L21, middle east variant, not rooted. Updater still says no update available
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any help would be greatly appreciated.
You're on latest update, as you can check here http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=bln-l21c185b140&firmware_page=0 without a model debranding, at the moment you cannot receive other updates.
So I wont be getting emui 5 or 6 for that matter?
BELIEVER PK said:
So I wont be getting emui 5 or 6 for that matter?
Click to expand...
Click to collapse
Exactly, not for now at least without a device rebranding. Oh yes, EMUI 6 will be on Oreo, and we still don't know for sure if our device will finally get it or not.
BELIEVER PK said:
Its almost October and I'm still stuck on EMUI 4.1. My model is BLN-L21, middle east variant, not rooted. Updater still says no update available
Any help would be greatly appreciated.
Click to expand...
Click to collapse
i have BLN-L21 and I am on emui 5.1 with B371 update officially through the system update in settings. Also middle east variant
---------- Post added at 01:32 AM ---------- Previous post was at 01:30 AM ----------
RedSkull23 said:
You're on latest update, as you can check here http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=bln-l21c185b140&firmware_page=0 without a model debranding, at the moment you cannot receive other updates.
Click to expand...
Click to collapse
That's definitely not true. I am on BLN-L21C185B371 middle east variant
So what is wrong with mine?
oae08 said:
That's definitely not true. I am on BLN-L21C185B371 middle east variant
Click to expand...
Click to collapse
Ok sorry my bad, i put the B140 at the end and obviously MT site found only matching build firmwares.
BELIEVER PK said:
So what is wrong with mine?
Click to expand...
Click to collapse
You could try to force the update by going on system update -> clicking on the 3 dots on upper right corner -> choose 1st option, "download latest update". If nothing is found, you could flash latest update by dload method.
BELIEVER PK said:
So what is wrong with mine?
Click to expand...
Click to collapse
Flash these files via dload. it should update you to the BLN-L21C185B361 version.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1279/g104/v84689/f2/full/update.zip
http://update.hicloud.com:8180/TDS/...89/f2/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/...hw_meafnaf/update_full_BLN-L21_hw_meafnaf.zip
Good luck
You sure its safe right? Because I've seen a lot of posts about manual updating where people are facing missing themes/fm radio/updater app and lots of bugs...
And will this void my warranty?
BELIEVER PK said:
You sure its safe right? Because I've seen a lot of posts about manual updating where people are facing missing themes/fm radio/updater app and lots of bugs...
Click to expand...
Click to collapse
This happens the most when wrong firmwares for your build number are downloaded, but with the 3 packages that shashank linked to you yes, you are safe. They're official packages that matches your build
Thanks. Will flashing these void my warranty.
And if you don't mind, could you give me instructions on how to flash via dload...
BELIEVER PK said:
Thanks. Will flashing these void my warranty.
And if you don't mind, could you give me instructions on how to flash via dload...
Click to expand...
Click to collapse
These are absolutely stock version and no warranty loss.
For dload, check my signature below for dload guide. It is quick steps for all requirements and you can flash files easily.
Call customer care or chat with their online support they will ask for IMEI and few other things and updated will be there within 48 hours they have that hi care app where u can get online support or from there website or twitter or simply by calling customer care number
Thanks
Hey guys, sorry for the necrobump. I successfully flashed update.zip using dload (had to move it to internal storage to flash successfully).
But whenever I try to flash the 2nd file "update_full_BLN-L21_hw_meafnaf.zip" it goes upto 5% and fails. Also while booting it says "Your device has failed verification and may not work properly". On top of that, I lost file manager and update option in the settings (probably because the 2nd file did not flash). And for some reason, my build no. is "NRD90M test-keys" now...
Please help.
FYI, I'm still not rooted nor unlocked Bootloader.
I had the same problem: recovery stuck at 5 % until timed-out. Please make sure that your device is not connected to your computer via USB and then reboot into recovery mode. I unplugged the cable from both devices to be very sure.
See this thread on Huawei P9: p9/help/forced-recovery-stuck-5-t3594840
Hello everyone
I have a Huawei P30 ELE-L29 that was getting an OTA update so I put the phone in my pocket, after it updated it asked for a password (I never used a password or pattern or anything to lock it)
I tried many things like Find my Device (the site shows that it is not connected) and tried to remove keys with adb but the phone is oem and frp locked.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I did NOT reset the phone before trying the next thing I did, because there were things in it that couldn't be replaced. (I did reset it after i installed the EMUI 10 update and it failed to boot)
What I thought was that the update failed or something went wrong during it.
I downloaded every firmware available in this page
https://forum.xda-developers.com/huawei-p30-pro/how-to/ready-emui-10-c431-dload-version-t4008639
The firmware (ELE-L29B 10.0.0.168 C431E22R2P5) and ELE-L29B 10.0.0.168(C185E4R7P1) install successfully (VIA OTG) but the phone boots to this message "Your device has loaded a different operating system"
And it gets stuck like that for a few seconds before rebooting to the same message or to the eRecovery ( the eRecovery has the option to download and update via WIFI but it always returns with the same results of "get package info failed")
ALL other firmware (emui 9) Fail to install via OTG
What I want to know is can I save the phone? can I downgrade the firmware? will SP TOOLS work if all else fails or does it need usb debugging enabled too?
NOTE: SP Tools Asks for a SCATTER FILE that is supposed to be in the firmware zip but IT IS NOT, i don't know where to get it.
SirHanck said:
Hello everyone
I have a Huawei P30 ELE-L29 that was getting an OTA update so I put the phone in my pocket, after it updated it asked for a password (I never used a password or pattern or anything to lock it)
I tried many things like Find my Device (the site shows that it is not connected) and tried to remove keys with adb but the phone is oem and frp locked.
I did NOT reset the phone before trying the next thing I did, because there were things in it that couldn't be replaced. (I did reset it after i installed the EMUI 10 update and it failed to boot)
What I thought was that the update failed or something went wrong during it.
I downloaded every firmware available in this page
https://forum.xda-developers.com/huawei-p30-pro/how-to/ready-emui-10-c431-dload-version-t4008639
The firmware (ELE-L29B 10.0.0.168 C431E22R2P5) and ELE-L29B 10.0.0.168(C185E4R7P1) install successfully (VIA OTG) but the phone boots to this message "Your device has loaded a different operating system"
And it gets stuck like that for a few seconds before rebooting to the same message or to the eRecovery ( the eRecovery has the option to download and update via WIFI but it always returns with the same results of "get package info failed")
ALL other firmware (emui 9) Fail to install via OTG
What I want to know is can I save the phone? can I downgrade the firmware? will SP TOOLS work if all else fails or does it need usb debugging enabled too?
NOTE: SP Tools Asks for a SCATTER FILE that is supposed to be in the firmware zip but IT IS NOT, i don't know where to get it.
Click to expand...
Click to collapse
If you have EMUI 10 on your phone, you can't use any firmware to downgrade. Only way is by using HiSuite PC version 10 and an working device.
In order to pass the error with loaded different operating system, you will need to flash using dload firmware and an OTG adapter + memory stick or from an Huawei NMcard.
In order to help you get your device working, i will need to know what build and cust you have on your device now or before upgrading (ex: P30 ELE-L29 C431) so i can give you the link for proper firmware.
SilviuO said:
If you have EMUI 10 on your phone, you can't use any firmware to downgrade. Only way is by using HiSuite PC version 10 and an working device.
In order to pass the error with loaded different operating system, you will need to flash using dload firmware and an OTG adapter + memory stick or from an Huawei NMcard.
In order to help you get your device working, i will need to know what build and cust you have on your device now or before upgrading (ex: P30 ELE-L29 C431) so i can give you the link for proper firmware.
Click to expand...
Click to collapse
Thanks for the reply.
the firmware that's installed right now is this one
ELE-L29B 10.0.0.168(C185E4R7P1)_Firmware_NA_EMUI10.0.0_0501 5SNP
HiSuite says that my device is not supported
SirHanck said:
Thanks for the reply.
the firmware that's installed right now is this one
ELE-L29B 10.0.0.168(C185E4R7P1)_Firmware_NA_EMUI10.0.0_0501 5SNP
Click to expand...
Click to collapse
Ok, but before you made the update (when in EMUI 9.1) what cust and build were you on? (ex. ELE-L29 C431 or ELE-L29 C605).
SilviuO said:
Ok, but before you made the update (when in EMUI 9.1) what cust and build were you on? (ex. ELE-L29 C431 or ELE-L29 C605).
Click to expand...
Click to collapse
I really don't know, the phone was bought from Europe (France) so i am assuming it's C431 or C432.
SirHanck said:
I really don't know, the phone was bought from Europe (France) so i am assuming it's C431 or C432.
Click to expand...
Click to collapse
It's dual SIM or Single SIM? Maybe is not ELE-L29 but ELE-L09, so therefore the error when flashing ELE-L29 C431.
SilviuO said:
It's dual SIM or Single SIM? Maybe is not ELE-L29 but ELE-L09, so therefore the error when flashing ELE-L29 C431.
Click to expand...
Click to collapse
it is ELE-L29, it's written on the back under the glass and it is dual SIM or 1 SIM and NM
the reflective glass makes it impossible to capture the tiny words in a photo
SirHanck said:
it is ELE-L29, it's written on the back under the glass and it is dual SIM or 1 SIM and NM
the reflective glass makes it impossible to capture the tiny words in a photo
Click to expand...
Click to collapse
OK, let's say it's ELE-L29 c431. Flash this firmware in order to revive your device. If it's not working, then it means it's a C432 version and you will need a C432 dload firmware, which atm is not yet released.
Please let me know if this firmware for C431 worked
https://drive.google.com/uc?id=1GnoXGRNt-2uRnNOyNN89s1Ojndpb6gaw&export=download
SilviuO
Alright, I will try it once the download is finished.
Thank you very much.:good:
SirHanck said:
Alright, I will try it once the download is finished.
Thank you very much.:good:
Click to expand...
Click to collapse
Goodluck on this test :good:.
If still doesn't work, read and do what i've said on this post and tell me what info are you getting on ADB about your phone. Maybe the info contains your original cust, the one you were on EMUI 9.1 before updating to EMUI 10.
SilviuO
SilviuO said:
Goodluck on this test :good:.
If still doesn't work, read and do what i've said on this post and tell me what info are you getting on ADB about your phone. Maybe the info contains your original cust, the one you were on EMUI 9.1 before updating to EMUI 10.
SilviuO
Click to expand...
Click to collapse
Good day SilviuO,
Sadly the c431 didn't work
in this post of maxx88
https://forum.xda-developers.com/huawei-p30-pro/how-to/ready-emui-10-c431-dload-version-t4008639
he has a c636
But the link doesn't work for me (access denied), do you have a working link for that firmware?
SirHanck said:
Good day SilviuO,
Sadly the c431 didn't work
in this post of maxx88
https://forum.xda-developers.com/huawei-p30-pro/how-to/ready-emui-10-c431-dload-version-t4008639
he has a c636
But the link doesn't work for me (access denied), do you have a working link for that firmware?
Click to expand...
Click to collapse
Here u go, m8. Maybe this is what you need to revive it - ELLE-L29B 10.0.0.168(C636E4R3P4)_Firmware_NA_EMUI10.0.0_05015SFP.zip
SilviuO said:
Here u go, m8. Maybe this is what you need to revive it - ELLE-L29B 10.0.0.168(C636E4R3P4)_Firmware_NA_EMUI10.0.0_05015SFP.zip
Click to expand...
Click to collapse
Great, hopefully this works, thank you:good:
SirHanck said:
Great, hopefully this works, thank you:good:
Click to expand...
Click to collapse
Hope it works, don't know what else you can do, beside flashing another cust different than C431 & C636 you tried (i mean trying with C605 and C185 too)
ELLE-L29B 10.0.0.168(C185E4R7P1)_Firmware_NA_EMUI10.0.0_05015SNP.rar
ELLE-L29B 10.0.0.168(C605E19R1P3)_Firmware_NA_EMUI10.0.0_05015SUV.zip
SilviuO said:
Goodluck on this test :good:.
If still doesn't work, read and do what i've said on this post and tell me what info are you getting on ADB about your phone. Maybe the info contains your original cust, the one you were on EMUI 9.1 before updating to EMUI 10.
SilviuO
Click to expand...
Click to collapse
Hey SilviuO
so I did the fastboot oem check and it is c432
is there EMUI 10 C432 or I'll have to wait?
Edit: I can't even find EMUI 9 with C432 to try it, do you have any links to a C432 firmawre?
SirHanck said:
Hey SilviuO
so I did the fastboot oem check and it is c432
is there EMUI 10 C432 or I'll have to wait?
Click to expand...
Click to collapse
Here you go, m8. Get it downloaded and revive your phone
ELLE-L29B 10.0.0.168(C432E22R2P5)_Firmware_NA_EMUI10.0.0_05015TGG.zip
Goodluck on flashing, m8 :highfive:
SilviuO said:
Here you go, m8. Get it downloaded and revive your phone
ELLE-L29B 10.0.0.168(C432E22R2P5)_Firmware_NA_EMUI10.0.0_05015TGG.zip
Goodluck on flashing, m8 :highfive:
Click to expand...
Click to collapse
IT WORKED!
THANK YOU!! THANK YOU!! THANK YOU!!, YOU ARE A LIFE SAVER SilviuO:good:
Happy new year!!!:highfive:
SirHanck said:
IT WORKED!
THANK YOU!! THANK YOU!! THANK YOU!!, YOU ARE A LIFE SAVER SilviuO:good:
Happy new year!!!:highfive:
Click to expand...
Click to collapse
Glad i could help you, m8. Now you're back in business and with EMUI 10 on board :highfive:. Guess you'll receive v173 or v178 soon (check for OTA or with HiSuite PC version for update).
Enjoy it and Happy New Year to you too
SilviuO
Hello, friends of your work, and I would like to help you I own a Huawei P30 Demo phone How can I permanently delete the demo? And making the phone work with all its features from the network and the fingerprint Thank you very much
mouraj2 said:
Hello, friends of your work, and I would like to help you I own a Huawei P30 Demo phone How can I permanently delete the demo? And making the phone work with all its features from the network and the fingerprint Thank you very much
Click to expand...
Click to collapse
Short answer is you can't . No firmware or other thing will work unless you have an unlocked bootloader with rooted system, which can't be done because Huawei shutdown their unlocking bootloader service.
The other way is to change your phone motherboard, which is ~ 200 $ at least....
hello sirs.
please helpt me with my problem.
i installed a diferent version of update for my p40 pro and now i can't conect to computer and also fast charge not working.
i instaled an n39 version instead nx9.
Please if someone can help me with an ideea.
willing to pay if someone cand fix remotely.
thank you
Can you get into erecovery may fix did you backup prior to downgrade. flashing wrong firmware is deadly and hard to fix I'm afraid
mihai201984 said:
hello sirs.
please helpt me with my problem.
i installed a diferent version of update for my p40 pro and now i can't conect to computer and also fast charge not working.
i instaled an n39 version instead nx9.
Please if someone can help me with an ideea.
willing to pay if someone cand fix remotely.
thank you
Click to expand...
Click to collapse
Can not be fixed remotely. No USB connection. You can try to use a dload firmware+Huawei storage card. I don't say it wil work but i don't say it will not work. You have to try.
You didn't mention what firmware version was on it and what is now.
DoobyDroid said:
Can you get into erecovery may fix did you backup prior to downgrade. flashing wrong firmware is deadly and hard to fix I'm afraid
Click to expand...
Click to collapse
not working. i've tried with dload. i have tried a version of 10.1.0.134.
with dload is working to flash but i don't have original firmware do flash.
Aftef update still doesn't work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Te rezolv eu cu un firmware. Vezi mai jos link-ul.
I will provide you the right firmware. See the following link.
Google Drive - Virus scan warning
drive.google.com
I have the same problem. Tried flashing the firmware but it didnt work.
Does anybody have a solution?
Thanks.
Stelios.GR said:
I have the same problem. Tried flashing the firmware but it didnt work.
Does anybody have a solution?
Thanks.
Click to expand...
Click to collapse
Why don't to write more details? What you did, what firmware, method did you use etc? I lost my crystal globe.
I tried to flash the firmware you uploaded using otg usb stick. I also tried e-recovery but didn't have any luck.
I tried to flash the firmware you uploaded using otg usb stick. I also tried e-recovery but didn't have any luck.
What firmware/region is now on your phone?
What firmware/region was on your phone?
badmania98 said:
What firmware/region is now on your phone?
What firmware/region was on your phone?
Click to expand...
Click to collapse
My phone is nx9 and i accidentally flashed n39
Stelios.GR said:
My phone is nx9 and i accidentally flashed n39
Click to expand...
Click to collapse
Post here an image as the above one, from your phone. Do you have USB connection to the OTG or computer?
p40 pro bricked
hello sirs. please helpt me with my problem. i installed a diferent version of update for my p40 pro and now i can't conect to computer and also fast charge not working. i instaled an n39 version instead nx9. Please if someone can help me with...
forum.xda-developers.com
badmania98 said:
Post here an image as the above one, from your phone.
p40 pro bricked
hello sirs. please helpt me with my problem. i installed a diferent version of update for my p40 pro and now i can't conect to computer and also fast charge not working. i instaled an n39 version instead nx9. Please if someone can help me with...
forum.xda-developers.com
Click to expand...
Click to collapse
I also have the same issues as the OP. My phone can't supercharge and connect to pc.
That means USB OTG is not working. That means also you couldn't try ”my” firmware. Find a Huawei storage card and try.
Can I try something else? I can access the USB stick with otg but it keeps saying that the package is not compatible when I try to flash it.
Thanks for the help.
Give me an email address. I can send you via We Transfer, few dload firmware to try.
Do I flash it with the same method?
Thanks a lot for the help man.
Delete your email address. I will send you the link to download via PM. Will be 10.1.0.176 and 11.0.0.193. The same method. Unzip and copy dload folder to the memory stick. Try one and after that the other (if the first one is not working).
Nobody to help me....
Android 11 Global ROM
WIFI:
https://rsdsecure-cloud.motorola.com/download/TB-J606F_S320029_210923_ROW.zip
LTE:
https://rsdsecure-cloud.motorola.com/download/TB-J606L_S320030_210923_ROW.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@qwer1335 I've changed the prefix of your thread from "Development" to "General" as the thread didn't qualify for the first one. Please review the sticked guidances of the responsible moderators' team prior to your next posting and do not change the prefix back! Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Updated with LMSA with no issues, only be warned that everything is deleted and you start from scratch. I had my bootloader unlocked, this was kept. But I am unable to root it as I did with Android 10. Patching boot.img with Magisk and I get bootloop to fastboot after flashing it. Only way to continue as of now was to flash the boot.img that came with the new firmware.
Hallux_ said:
Updated with LMSA with no issues, only be warned that everything is deleted and you start from scratch. I had my bootloader unlocked, this was kept. But I am unable to root it as I did with Android 10. Patching boot.img with Magisk and I get bootloop to fastboot after flashing it. Only way to continue as of now was to flash the boot.img that came with the new firmware.
Click to expand...
Click to collapse
So may I ask if you bought your 606f from China or abroad?
Since mine is a Chinese one, everytime I flash 0805/0906 it ends with *system and hardware not compatible* error. (the same both BL locked and unlocked)
I wonder if this new ROW rom fixes this issue.
Thanks.
i tried but the link doesn't work
EDIT: i tried from rescue and smartaassistant, and i found the update
asukav said:
So may I ask if you bought your 606f from China or abroad?
Since mine is a Chinese one, everytime I flash 0805/0906 it ends with *system and hardware not compatible* error. (the same both BL locked and unlocked)
I wonder if this new ROW rom fixes this issue.
Thanks.
Click to expand...
Click to collapse
I have the global version.
Hallux_ said:
I have the global version.
Click to expand...
Click to collapse
Then that's not a problem.
Can you guide me how to unpack the img files? I tried several but none of those works correctly.
I just want to do some research on what kind of restrictions lenovo does to the rom files.
Thank you.
asukav said:
Then that's not a problem.
Can you guide me how to unpack the img files? I tried several but none of those works correctly.
I just want to do some research on what kind of restrictions lenovo does to the rom files.
Thank you.
Click to expand...
Click to collapse
Sorry, I am not sure if it is what you are looking for, but I downloaded the new ROM with LMSA and I do have all the IMG files in the download directory. I do not know if you can do the same not having the exact same tablet model.
asukav said:
So may I ask if you bought your 606f from China or abroad?
Since mine is a Chinese one, everytime I flash 0805/0906 it ends with *system and hardware not compatible* error. (the same both BL locked and unlocked)
I wonder if this new ROW rom fixes this issue.
Thanks.
Click to expand...
Click to collapse
i recently install this rom but have "system and hardware not compatible, can you intsall android 11 on chinese lenovo p11 tablet?
famicom9x said:
i recently install this rom but have "system and hardware not compatible, can you intsall android 11 on chinese lenovo p11 tablet?
Click to expand...
Click to collapse
Still a "NO". It's the same: "system and hardware not compatible".
So I flash back to 0520.
I do hope I could spare some time to unpack those imgs to have a check on some specific files next week.
Just be busy all the time with my work...
Engineers from Lenovo China give me no useful answers. I think I can only count on myself.
I tried update to 210923 via LMSA, but not boot.
Then I tried again with qpst 2.7.496, it boot up and get a minor update to 0925.
Still lost serial number.
Que??
Have a new ROM in https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/TB-J606F_S320109_211207_ROW.zip but after i flash with QPST 2.7.496 still "system and hardware not compatible". Need someone fix it.
tnt1212 said:
Have a new ROM in https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/TB-J606F_S320109_211207_ROW.zip but after i flash with QPST 2.7.496 still "system and hardware not compatible". Need someone fix it.
Click to expand...
Click to collapse
It's because your device is Region locked. Within this XDA there is a forum on how to region unlock ur device. You have to use QCN file to change it.
Mine won't update because of region lock and now it's working perfectly
Hey guys, do you know if we still have widevine L1 after updating this ROM with locked bootloader?
i have a moto g pure from xfinity mobile i found a stock zip file using the lenovo rsa i then copied the boot image then ran it through the magisk app i then fast boot it and this is the error i get i did oem unlock in settings and also fastboot oem unlock it sends to phone then starts to write and this is the error can someone smarter please help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
moderater sorry im new please foward to appropiate forum thank you
My guess is you've a driver problem.
Use the driver offered here:
Where can I download the USB drivers for my device?| Motorola Support US
Visit the customer support page to view user guides, FAQs, bluetooth pairing, software downloads, drivers, tutorials and to get repair and contact us information.Where can I download the USB drivers for my device?
motorola-global-portal.custhelp.com
jwoegerbauer said:
My guess is you've a driver problem.
Use the driver offered here:
Where can I download the USB drivers for my device?| Motorola Support US
Visit the customer support page to view user guides, FAQs, bluetooth pairing, software downloads, drivers, tutorials and to get repair and contact us information.Where can I download the USB drivers for my device?
motorola-global-portal.custhelp.com
Click to expand...
Click to collapse
not a driver problem its a failed verification on the stock patched.img through magisk diferent verifiction key for the two images
OK
So did you ever get it figured out? I have the moto g pure as well. I have it bootloader unlocked but have been unable to find a boot.img to try to use Magisk on. The stock file I tried to get from the Motorola tool keeps giving me an error saying the file failed to decompress....
Agent_Orange1488 said:
So did you ever get it figured out? I have the moto g pure as well. I have it bootloader unlocked but have been unable to find a boot.img to try to use Magisk on. The stock file I tried to get from the Motorola tool keeps giving me an error saying the file failed to decompress....
Click to expand...
Click to collapse
No I never did how did you get your bootloader unlocked?
Agent_Orange1488 said:
So did you ever get it figured out? I have the moto g pure as well. I have it bootloader unlocked but have been unable to find a boot.img to try to use Magisk on. The stock file I tried to get from the Motorola tool keeps giving me an error saying the file failed to decompress....
Click to expand...
Click to collapse
Newportswag74 said:
No I never did how did you get your bootloader unlocked?
Click to expand...
Click to collapse
There is your boot img
Newportswag74 said:
There is your boot img
Click to expand...
Click to collapse
Thanks a ton!!! Bootloader unlock was simple for me (T-Mobile). https://androidbiits.com/unlock-bootloader-motorola-moto-g-pure-xt2163-4-easily/
The guide at this link worked perfectly for me!! I will let you know how Magisk root goes
Agent_Orange1488 said:
Thanks a ton!!! Bootloader unlock was simple for me (T-Mobile). https://androidbiits.com/unlock-bootloader-motorola-moto-g-pure-xt2163-4-easily/
The guide at this link worked perfectly for me!! I will let you know how Magisk root goes
Click to expand...
Click to collapse
Really when I tried that at the Lenovo website it said my pure wasn't eligible
did patching that boot work?
i managed to patch the latest firmware with march security update, and root the stock rom, now i need to mess with gsis